Scribd
Upload
3K views8 pages

Inprocess Inspection Report

The document contains three in process inspection reports from Abhishek K Road Systems Pvt. Ltd for different sized HSRP plates. It lists inspection parameters like length, width, embossed text height and position, reflectivity, thickness, and appearance for three part numbers: HSRP 500 x 120, HSRP 200 x 100, and HSRP 285 x 45. Measurement methods including digital Vernier calipers, height gauges, and reflectometers are specified. Acceptance criteria are provided for each parameter.

Uploaded by

pardeep kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views8 pages

Inprocess Inspection Report

The document contains three in process inspection reports from Abhishek K Road Systems Pvt. Ltd for different sized HSRP plates. It lists inspection parameters like length, width, embossed text height and position, reflectivity, thickness, and appearance for three part numbers: HSRP 500 x 120, HSRP 200 x 100, and HSRP 285 x 45. Measurement methods including digital Vernier calipers, height gauges, and reflectometers are specified. Acceptance criteria are provided for each parameter.

Uploaded by

pardeep kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Abhishek K Road Systems Pvt. Ltd DOC.

NO :-AK/QC/II/003

REV NO :-00

(IN PROCESS INSPECTION REPORT) REV DATE :-00

SHIFT PART NAME HSRP PART NUMBER HSRP 500 X 120 INSPECTION DATE :-

FREQUENCY FIRST/SET UP APPROVAL (05 SAMPLES) MIDDLE INSPECTION (05 SAMPLES) LAST INSPECTION (05 SAMPLES)

PARAMETER SPECIFICATION METHOD OF LINE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5


INSPECTION

All edges must be rounded and


burr free to avoid injury.Insert
mark,Dent,Scratches
APPEARANCE wrinckle,cracks or other surface VISUAL
defect should not be present.No
area should be left without
reflective sheeting(corner area).

LENGTH 500.0±0.50 mm DVC

WIDTH 120 ± 0.30 MM DVC

EMBOSSING HEIGHT 1.60 ± 0.10 mm DIGITAL HEIGHT


GAUGE
14 ± 0.50 mm DIGITAL HEIGHT
DISTANCE FROM "IND" TO (Across Length) GAUGE
EDGES(AS PER DRAWING) 52.0 ±0.5 mm DIGITAL HEIGHT
(Across Width) GAUGE

20.0 ±1.0 mm DIGITAL HEIGHT


DISTANCE FROM "HOLOGRAM" (Across Length GAUGE
TO EDGES(AS PER DRAWING)
23.0 ± 1.0 mm DIGITAL HEIGHT
(Across Width) GAUGE

CHAKRA POSITION ON
SHOULD BE IN CENTER VISUAL
HOLOGRAM

IND-Width 16.25± 0.50 mm DVC

Corner Radius 4 X R 12mm RADIUS GAUGE

Reflective sheet width 121.0mm


Reflectivity @ 30° =For White 12
minimum,For Yellow 8 minimum , REFLECTO
PLATE REFLECTIVITY For Green 2.3 minimum
Reflectivity @ 40° =For White 6 METER
minimum, For Yellow 4 minimum ,
For Green 0.9 minimum

THICKNESS 1.0 ±0.03 mm DMM

Prepared By :- Approved by
Prepared By :- Approved by
Abhishek K Road Systems Pvt. Ltd DOC. NO :-AK/QC/II/002

REV NO :-00

(IN PROCESS INSPECTION REPORT) REV DATE :-00

SHIFT PART NAME HSRP PART NUMBER HSRP 200 X 100 INSPECTION DATE :-

FREQUENCY FIRST/SET UP APPROVAL (05 SAMPLES) MIDDLE INSPECTION (05 SAMPLES) LAST INSPECTION (05 SAMPLES)

PARAMETER SPECIFICATION METHOD OF LINE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5


INSPECTION

All edges must be rounded and


burr free to avoid injury.Insert
mark,Dent,Scratches
APPEARANCE wrinckle,cracks or other surface VISUAL
defect should not be present.No
area should be left without
reflective sheeting(corner area).

MEASURING
LENGTH 200.0±0.50 mm SCALE/DVC

WIDTH 100.0 ±0.3 mm MEASURING


SCALE/DVC

EMBOSSING HEIGHT 1.60 ± 0.10 mm DIGITAL HEIGHT


GAUGE
12.0 ±0.5 mm DIGITAL HEIGHT
DISTANCE FROM "IND" TO (Across Length) GAUGE
EDGES(AS PER DRAWING) 45.0 ±0.5 mm DIGITAL HEIGHT
(Across Width) GAUGE

12.0 ±1.0mm DIGITAL HEIGHT


DISTANCE FROM "HOLOGRAM" (Across Length GAUGE
TO EDGES(AS PER DRAWING)
22.0 ± 1.0 mm DIGITAL HEIGHT
(Across Width) GAUGE

CHAKRA POSITION ON
SHOULD BE IN CENTER VISUAL
HOLOGRAM

IND-Width 10 ± 0.50 mm DVC

Corner Radius 4 X R 12mm RADIUS GAUGE

Reflective sheet width 101.0mm


Reflectivity @ 30° =For White 12
minimum,For Yellow 8 minimum , REFLECTO
PLATE REFLECTIVITY For Green 2.3 minimum
Reflectivity @ 40° =For White 6 METER
minimum, For Yellow 4 minimum ,
For Green 0.9 minimumminimum

THICKNESS 1.0 ±0.03 mm DMM

Prepared By :- Approved by
Prepared By :- Approved by
Abhishek K Road Systems Pvt. Ltd DOC. NO :-AK/QC/II/001

REV NO :-00

(IN PROCESS INSPECTION REPORT) REV DATE :-00

SHIFT PART NAME HSRP PART NUMBER HSRP 285 X 45 INSPECTION DATE :-

FREQUENCY FIRST/SET UP APPROVAL (05 SAMPLES) MIDDLE INSPECTION (05 SAMPLES) LAST INSPECTION (05 SAMPLES)

PARAMETER SPECIFICATION METHOD OF LINE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5


INSPECTION

All edges must be rounded and


burr free to avoid injury.Insert
mark,Dent,Scratches
APPEARANCE wrinckle,cracks or other surface VISUAL
defect should not be present.No
area should be left without
reflective sheeting(corner area).

MEASURING
LENGTH 285.00 ± 0.50 mm SCALE/DVC

WIDTH 45 ±0.3 mm MEASURING


SCALE/DVC

EMBOSSING HEIGHT 1.60 ± 0.10 mm DIGITAL HEIGHT


GAUGE
18.5 ± 1.0 mm DIGITAL HEIGHT
DISTANCE FROM "IND" TO (Across Length) GAUGE
EDGES(AS PER DRAWING) 8.0 ± 1.0 mm DIGITAL HEIGHT
(Across Width) GAUGE

36.0 ±1.0 mm DIGITAL HEIGHT


DISTANCE FROM "HOLOGRAM" (Across Length GAUGE
TO EDGES(AS PER DRAWING)
18.0 ± 1.0 mm DIGITAL HEIGHT
(Across Width) GAUGE

CHAKRA POSITION ON
SHOULD BE IN CENTER VISUAL
HOLOGRAM

IND-Width 7.5± 0.50 mm DVC

Corner Radius 4 X R 12mm RADIUS GAUGE

Reflective sheet width 46.0mm


Reflectivity @ 30° =For White 12
minimum,For Yellow 8 minimum , REFLECTO
PLATE REFLECTIVITY For Green 2.3 minimum
Reflectivity @ 40° =For White 6 METER
minimum, For Yellow 4 minimum ,
For Green 0.9 minimum

THICKNESS 1.0 ±0.03 mm DMM

Prepared By :- Approved by
Prepared By :- Approved by
DOC. NO :-

REV NO :-00

(IN PROCESS INSPECTION REPORT) REV DATE :-00

SHIFT PART NAME HSRP PART NUMBER HSRP 340 X 120 INSPECTION DATE :-

FREQUENCY FIRST/SET UP APPROVAL (05 SAMPLES) MIDDLE INSPECTION (05 SAMPLES) LAST INSPECTION (05 SAMPLES)

PARAMETER SPECIFICATION METHOD OF LINE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5


INSPECTION

All edges must be rounded and


burr free to avoid injury.Insert
mark,Dent,Scratches
APPEARANCE wrinckle,cracks or other surface VISUAL
defect should not be present.No
area should be left without
reflective sheeting(corner area).

MEASURING
LENGTH 340.00 ± 0.50 mm SCALE/DVC

WIDTH 200 ±0.3 mm MEASURING


SCALE/DVC

EMBOSSING HEIGHT 1.60 ± 0.10 mm DIGITAL HEIGHT


GAUGE
18.0 ± 0.5 mm DIGITAL HEIGHT
(Across Length) GAUGE
DISTANCE
91.0 ± 0.5 mm DIGITAL HEIGHT
(Across Width) GAUGE

26.0 ±1.0 mm DIGITAL HEIGHT


(Across Length GAUGE
DISTANCE
56.0 ± 1.0 mm DIGITAL HEIGHT
(Across Width) GAUGE

CHAKRA POSITION ON
SHOULD BE IN CENTER VISUAL
HOLOGRAM

IND-Width 16.25± 0.50 mm DVC

Corner Radius 4 X R 12mm RADIUS GAUGE

Reflective sheet width 201.0mm


Reflectivity @ 30° =For White 12
minimum,For Yellow 8 minimum , REFLECTO
PLATE REFLECTIVITY For Green 2.3 minimum
Reflectivity @ 40° =For White 6 METER
minimum, For Yellow 4 minimum ,
For Green 0.9 minimum

THICKNESS 1.0 ±0.03 mm DMM

Prepared By :- Approved by
Prepared By :- Approved by

You might also like