TYPES AND COMPONENTS OF

COMPUTER SYSTEM
IGCSE (0417 – Paper I)
 WHAT IS HARDWARE?

 Hardware is the physical parts of the computer

system – the parts that you can touch and see.

A Motherboard, a CPU, a Keyboard and a Monitor are

all items of Hardware
 WHAT IS SOFTWARE?
 Software is a collection of instructions that can be
‘run’ on a computer. These instructions tell the
computer what to do.

Software is not a physical thing (but it can of course

be stored on a physical medium such as a CD-ROM), it
is just a bunch of codes.

An operating system such as Windows XP or Mac OS X,

applications such as Microsoft Word, and the
instructions that control a robot are all examples of
software.
 Hardware /
Software
Computer hardware is the physical components that make up the
computer system. Hardware is useless without software to run on it.

Software is instructions that tell computer hardware what to do.

Software is useless unless there is hardware to run it on.

For a computer system to be useful it has to consist of both hardware

and software.
MAIN COMPUTER COMPONENTS
Central Processing Unit (CPU)
 The CPU is the 'brain' of the computer. It is the device
that carries out software instructions.
 The Pentium processor made by Intel is an example of
a CPU.

CPU is usually plug into a large socket on the main

circuit board (the motherboard) of a computer. They
get very hot when they are operating so usually have a
large fan attached to their top to keep them cool.
MAIN MEMORY

 Any data or instructions that are to be

processed by the CPU must be placed
into main memory (sometimes known as
primary storage).
 Random Access Memory (RAM)
 Random Access Memory (RAM) is the part
of the computer that temporarily stores
the instructions that the computer is
running, and the data it is processing.
RAM is a volatile storage device. This
means that if the computer’s power is
turned off the contents of RAM disappear
and are lost.
RAM, like the CPU, also plugs in to
sockets on the motherboard.
 Read-Only Memory (ROM)
 Read-Only Memory (ROM) is used in most computers to
hold a small, special piece of software: the 'boot up'
program.

This software runs when the computer is switched on or

'boots up'. The software checks the computer’s hardware
and then loads the operating system.

ROM is non-volatile storage. This means that the data it

contains is never lost, even if the power is switched off.
 This 'boot up' software is known as the BIOS (Basic Input
Output System)
 Peripheral Devices
 Technically, a computer need only be made up of a
CPU and some RAM. But a computer like this would
not be much use to anybody – other devices need to be
connected to allow data to be passed in and out of the
computer.

The general name for these extra devices is

‘peripheral devices’. They are usually categorised
into input devices, output devices and storage
devices.
WHAT ARE INPUT DEVICES?

 Devices that pass data into the computer are known

as input devices.
 A keyboard, a mouse and a webcam are all examples of
input devices.

They all take information from the outside world (key

presses, hand movements, images), convert them into
data and then send this data into the computer for
processing.
WHAT ARE OUTPUT DEVICES?
 Devices that take data from the computer are
known as output devices.
 A monitor, a printer and a loudspeaker are all
examples of output devices.

They all take information from the computer and

convert it into real world things (images, paper
hardcopy, sound).
WHAT IS SECONDARY / BACKING STORAGE?
 Secondary storage (sometimes called backing
storage) is the name for all of the devices (apart from
ROM and RAM) that can store data in a computer
system.
 A hard drive, a CD-ROM, a floppy disc and a USB
memory stick are all examples of secondary storage
devices.

Secondary storage is non-volatile, so data that is

stored on these devices remains there safely.
WHAT IS AN OPERATING SYSTEM?
 An operating system is a special piece of software that
manages the general operation of a computer system:
It provides a user interface so that we can interact with
the computer
 It manages applications that are running on the
computer, starting them when the user requests, and
stopping them when they are no longer needed
 It manages files, helping us save our work, organize our
files, find files that we have saved and load files
 It manages the computers memory, deciding what should
be loaded into memory and what should be removed
 It looks after computer security, preventing unauthorized
access to the system
 It manages the computer’s input and output hardware
such as printers, etc.
 Without an operating system, a computer is of little
use.
But, just having an operating system running alone
on a computer is also not very useful - we need to
have application software (such as Word, Excel,
etc.) so that we can actually do useful tasks with the
computer.
 An operating system is a bit like the manager of a
factory - the manager’s job is to keep the factory
running smoothly, to make sure all the sections of the
factory work together, to check that deliveries arrive on
time, etc.
But, for the factory to actually make anything, other
people (the workers) are required - the manager cannot
make anything him/herself.
USER INTERFACES

 The system that people use to interact with a

computer (to give it commands, to see the
results of those commands, etc.) is known as the
user interface.

There are two that you need to be aware of:

Graphical User Interface (GUI)
 Command-Line Interface (CLI)
GRAPHICAL USER INTERFACE (GUI)

 A GUI is an interface built around visual

(graphical) things:
Windows are regions of the screen used to
display information
 Icons are small pictures that are used to
represent folders, software, etc.
 Menus are lists of options the user can select
from
 A pointer is an arrow that can be moved around
the screen and is used to select things
 Windows XP is an example of an operating
system with a GUI.
 GUIs are quite easy to use due to the visual
nature of the interface – the user has lots of
visual clues as to what things do.

However, to display all of the nice graphics

required by a GUI takes a lot of computing power
so quite a powerful computer is needed.
COMMAND LINE INTERFACE (CLI)
 Many years ago when computers were not very powerful
they could not display the colourful graphics required for a
GUI. The only interface available to most computer uses
was the ‘command line’.
The user would see nothing but a black screen. They would
have to type a command to make anything happen.
e.g. To copy a text file called NOTES from a floppy disc to
the hard drive the user would have to type:
> COPY A:\NOTES.TXT C:\
 The user would have to learn a whole set of strange
commands so that they could make use of the computer
system. Plus it was not very interesting look at – no visual
clues to tell you what to do next.
This meant computers used to be quite difficult to use, so
this type of interface is only really suitable for expert
users.
 Command-line interfaces are still used today on many
servers.
TYPES OF COMPUTER

 Computers come in all sorts of shapes and sizes.

You are all familiar desktop PCs and laptops, but
did you know that computers can be as small as
your mobile phone (in fact your phone is a
computer!) and as large as a room?!
 MAINFRAME COMPUTER
 A mainframe computer is a large computer, often used by
large businesses, in government offices, or by universities.

Mainframe computers are typically:

Powerful - they can process vast amounts of data, very
quickly
 Large - they are often kept in special, air-conditioned
rooms
 Multi-user - they allow several users (sometimes
hundreds) to use the computer at the same time,
connected via remote terminals (screens and keyboards)
PERSONAL COMPUTER (PC)
 The early 1980s saw a revolution in computing:
The creation of computers that were small
enough to fit on a desk, and cheap enough that
everyone could have their own, personal
computer, instead of having to share access to a
mainframe.

These computers came to be known as desktop

computers, or personal computers (PCs).

A typical PC contained the same basic

components as a mainframe computer (CPU,
RAM, storage, etc.) but at a fraction of the size
and cost.
LAPTOP COMPUTER
 A 'laptop' computer is a light, compact and
portable PC.

Laptops contain a rechargeable battery so that

they can be used even when not plugged in to a
mains power supply. They also have a built-in
LCD monitor.

To make them as portable as possible, most

laptops try to avoid any sort of cable or wire.
Instead of a mouse, a trackpad is used. Instead
of a wired connection to a network or printer,
'wireless' radio connections are used.
PALMTOP COMPUTER
 A palmtop computer is similar to a laptop computer,
but smaller. It's small enough to fit in the palm of
your hand (hence the name!)
Palmtops are usually not very powerful since fast
CPUs require a large battery and get hot - both
problems in a small device.
A typical palmtop have a very small keyboard - too
small to type on normally. Instead the user types
using both thumbs. Also there is no room for a
trackpad, so a touchscreen or tiny joystick is used
instead.
Palmtops are extremely portable, but the small
keyboard and screen make the devices tiring to use
for long periods.
PERSONAL DIGITAL ASSISTANT (PDA)
 PDA is similar to a palmtop computer, except it is even
more compact, and typically has no keyboard, using a
touch screen for all data input. Since the screen is so
small, many PDAs have a small stylus (plastic stick) that is
used to press things on the screen.

Most PDAs use some sort of handwriting-recognition

system to allow the user to write on the screen, and have
their writing converted into text.

PDAs tend to be used a 'digital diaries' allowing users to

take their e-mail, documents, appointments, etc. with
them wherever they go.

Note: You never see PDAs any more since modern 'smart'
phones can do all of this, and work as a phone too!