Fans | Air Handling Units | Air Distribution Products | Fire Safety | Air Curtains and heating Products | Tunnel

Fans

The Straight Way

Rectangular Cabinet Fan

Systemair India Pvt. Ltd. certifies that the

Rectangular Cabinet Fan shown herein
are licensed to bear the AMCA Seal. The
ratings shown are based on tests and
procedures performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with the
requirements of the AMCA Certified
Ratings Program.
2 | Rectangular Cabinet Fan

Rectangular Cabinet Fan

CDRE

The Systemair Rectangular Cabinet Fan units are the results

of long experience in the development and manufacturing of
ventilation systems. The partnership between highly
motivated Systemair employees and world know component
suppliers guarantees quality products on the highest
technical level and precise reliability.

The Systemair advantages:

• Modular system : Casings can be disassembled, if required.
Easy installation.
• Min. 25mm perforated panels manufactured from pre-
galvanised mild steel with non-flammable mineral wool infill
for thermal and acoustic insulation.
• All units are fitted with fans from the Systemair range, with
external rotor motors for the direct driven units.
• Compact design The Systemair accessories:
• Low-level noise • Flexible connections • Shutters
• Counter Flanges
The Systemair quality:
The Systemair performance curves:
Plug fans are installed in the Rectangular Cabinet Fans. The
impeller with backward curved blades are external rotor Have been tested using a test chamber in accordance with
motor and standard foot mounted motor (P44, 54 & 55) steel with AMCA 210. The values refer to an air density of 1.2
& aluminium impeller for all sizes. kg/m³ at 20°C.

Noise levels:
These plug fans are mounted on a motor supporting frame;
The technical data show the A-weighted sound pressure
the motor and impeller assembly is balanced dynamically in
levels LPA.
two levels according to VDI 2060. quality 0 2, 5.
Tolerance in accordance with technical conditions of supply
of fans DIN 24166, class 3, noise level ca. 0.5 x \pfa max.
Tolerance in accordance with technical conditions of supply
of fans DIN 24166, class 3. The Systemair selection criteria:
• Size
Panel insulation is provided by non flammable (AI) mineral • Air volume
fibre slab in accordance with DIN 4102. • Static Pressure
• Sound requirements
Thermal insulation K = 0.89 W/m²k in acc. With DIN 52210
Sound insulation Rw = appr. 25dB in acc. With DIN 52210.
 Rectangular Cabinet Fan | 3

PLEASE NOTE THE FOLLOWING

ADVISE
Reference Code FOR INSTALLATION AND OPERATION
OF SYSTEMAIR FANS

CDR
Safety Rules :
CDR Model ( Rectangular Cabinet Fan )
E /D 315
• Before you do any work on the fan you must disconnect
E = Single phase AC Impeller diameter
the electrical supply first.
D = Three phase AC
• The buyer is responsible that the local codes are being
followed.
• During all maintenance works, the electrical connections
must be checked.
Warranty rules :
• The buyer is responsible for the selection and operations
of the fan.
• The warranty is only for fans which are operating under
normal conditions. Warranty is only valid when thermal
protections (TK) are used.
• If the delivered goods shows failures, the customer can
claim the exchange of the product or parts of it up to the
amount of the buying price.
• Claims for secondary damages are not accepted.
• We reserve the rights to change the construction and
design without notice, for the purpose of technical
progress.

Rectangular Cabinet Fans

CDRE 315
4 | Rectangular Cabinet Fan
Rectangular Cabinet Fan

CDRE

AMCA 210, ISO 5801:2007 – p = 1.2kg/m³, 20°C, 1013 hPa

600
4
1… CDRE 315 – 1370rpm
2… CDRE 355 – 1383rpm
500 3… CDRE 400 – 1385rpm
4… CDRE 450 – 1340rpm

3 81

400 76
Static Pressure Ps [Pa]

2 82

74
300

1
73
73
200
71 82
77
72

100
70
74

71 75 78 84
0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Air Volume Q [m3/h] 1500 cfm @ 30mm

CDRE 315 CDRE 355 CDRE 400 CDRE 450

Voltage V 220 230 230 230

Frequency Hz 50 50 50 50
Phase - 1 1 1 1
Max. Motor Input Watts W 140 225 480 750
Max. Current A 0.68 0.94 2.1 3.2
Nominal Speed RPM 1370 1383 1385 1340
Max. Airflow m³/h 1537 2034 3640 4817
Sound Pressure level LpA at 3m dB(A) 51 55 58 63
Max. Temperature °C 45 60 50 60
Motor Insulation Class F F F F
Motor Protection IP 44 44 54 54
Capacitor µF 4 6 10 14
Weight kg 16 20 25 30

SOUND DATA
Performance certified is for installation type
Single figure on performance curves are overall inlet LwiA sound power levels, derived from measurements D-Ducted inlet. Ducted outlet. Speed (RPM)
taken in laboratory specifically under ducted conditions. Following is the inlet Lwi sound power levels (dB) in shown is nominal. Performance is based on
eight octave bands maximum airflow (0Pa) : actual speed of test. Performance ratings do
not include the effects of appurtenances
(accessories)
Model 63 125 250 500 1K 2K 4K 8K Overall The A-weighted sound ratings shown have
been calculated per AMCA international
CDRE 315 84 83 72 66 60 58 57 48 87 Standard 301. Values shown are for inlet Lwi
and LwiA sound power levels for installation
CDRE 355 86 88 74 69 63 60 63 55 90 type D ducted inlet, ducted outlet. Ratings
CDRE 400 90 88 79 75 67 64 63 71 92 include the effects of duct end correction.
Sound pressure level LpA at 3m are not
CDRE 450 88 93 84 79 74 73 74 70 95 licensed by AMCA international.

The sound power level rating shown are in decibel, referred to 10 -12 watts calculated per AMCA International
Standard 301.
 Rectangular Cabinet Fan | 5

Rectangular Cabinet Fans

CDRE 315

Dimensions

DC B

D
CB
A

IN METRIC

CDRE A B C(P.C.D.) D

315 400 450 425 400

355 550 550 525 500
400 600 650 625 600
450 600 650 625 600

NO LIABILITY FOR ERRORS – SUBJECT TO TECHNICAL MODIFICATIONS

6 | Rectangular Cabinet Fan

Rectangular Cabinet Fan

CDRD

Performance Data & Curves

AMCA 210, ISO 5801:2007 – p = 1.2kg/m³, 20°C, 1013 hPa
1200
3
92
1000
Static Pressure, Ps [Pa]

2 86
800 88

1
82 84
600
88

82
400
86

83
1… CDRD 500 – 1435rpm 200
2… CDRD 560 – 1456rpm
3… CDRD 630 – 1471rpm
83 87 89
0
0 2000 4000 6000 8000 10000 12000 14000
Air Volume, Q [m3/h]

CDRD 500 CDRD 560 CDRD 630

Voltage V 415 415 415
Frequency Hz 50 50 50
Phase - 3 3 3
Max. Motor Input Watts W 1359 2432 3893
Motor size kW 1.5 3 4
Max. Current A 3.2 6.0 7.9
Nominal Speed RPM 1435 1456 1471
Max. Airflow m3/h 6152 9702 12643
Sound Pressure level LpA at 3m dB(A) 63 67 69
Max. Temperature °C 40 40 40
Motor Insulation Class F F F
Motor Protection IP 55 55 55
Weight kg 65 85 110

Sound Data 2800 cfm @30mm 4000 cfm @30 mm

Single figure on performance curves are overall
Model 63 125 250 500 1k 2k 4k 8k Overall
inlet LwiA sound power levels, derived from
measurements taken in laboratory specifically CDRD 500 93 93 86 80 72 71 68 70 97
under ducted conditions, Following is the inlet Lwi CDRD 560 94 97 90 81 79 76 73 76 99
sound power levels (dB) in eight octave bands at
maximum airflow (0Pa): CDRD 630 95 99 92 83 81 78 77 77 101

• Performance certified is for installation type D – Ducted inlet, Ducted outlet, Speed (RPM) shown is nominal.
Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances
(Accessories).
• The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. The sound power
level ratings shown are in decibels, referred to 10-12 watts, calculated per AMCA International Standard 301. Values
shown are for inlet Lwi and Lwi(A) sound power levels for installation type D : ducted inlet, ducted outlet. Ratings include
the effects of duct end correction. Sound pressure level LpA at 3m are not licensed by AMCA International.
 Rectangular Cabinet Fan | 7

Direct Drive Rectangular In-Line

Fan
CDRD 500

Dimensions
SIDE VIEW FRONT INLET

Features A B
• The CDRD Cabinet In-line Duct D
Fan – a series of duct mounted
in-line centrifugal suitable for
supply or exhaust from
applications ranging from
residential & commercial to
AIR FLOW

industrial.
• Galvanised steel housing and D C (P.C.D.)
flanged connections.
• Backward curve centrifugal
impellers.
• Fan units are lightweight and can
be mounted at any angle.

IN METRIC
Motors
• Type – can supplied with direct- MODEL A B C D
driven standard TEFC motors.
• Electrical supply – three-phase to CDRD 500 650 710 680 650
suit a wide range of voltages and CDRD 560 750 785 755 725
frequencies.
CDRD 630 800 860 825 800

NO LIABILITY FOR ERRORS – SUBJECT TO TECHNICAL MODIFICATIONS

 Systemair IN/ CDRE/D/MAY2017

Systemair India Pvt. Ltd.

Plot no. 3, Sector - 31, Kasna
Greater Noida-201 308. India
Tel. +91 (0120) 4763100
Fax +91 (0120) 4763101

[email protected]
www.systemair.in