Scribd
Upload
82 views

Relief Valves (Implement) - Test and Adjust: Pruebas y Ajustes

Uploaded by

LENIN JHAIR VALDERRAMA SEGURA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views

Relief Valves (Implement) - Test and Adjust: Pruebas y Ajustes

Uploaded by

LENIN JHAIR VALDERRAMA SEGURA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

140H Motor Grader 12600001-UP (MACHINE) POWERED BY 3176C Engine(SE...

Página 1 de 3

Cerrar SIS

Pantalla anterior

Producto: MOTOR GRADER


Modelo: 140H MOTOR GRADER 126
Configuración: 140H Motor Grader 12600001-UP (MACHINE) POWERED BY
3176C Engine

Pruebas y Ajustes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering
System
Número de medio -RENR4113-07 Fecha de publicación -01/11/2006 Fecha de actualización -11/11/2006

i01827773

Relief Valves (Implement) - Test and Adjust


SMCS - 5117-025-TB ; 5117-081-TB

Note: Before you perform this adjustment, refer to Testing and Adjusting, "Machine Preparation for
Troubleshooting".

Table 1

Tools Needed
4C-4441 Relief Valve Test Tool Gp 1

1U-9358 Test Block Manifold 1

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 06/10/2009
140H Motor Grader 12600001-UP (MACHINE) POWERED BY 3176C Engine(SE... Página 2 de 3

Illustration 1 g00932260
Combination Valve

(1) Implement relief valve

Illustration 2 g00932261

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 06/10/2009
140H Motor Grader 12600001-UP (MACHINE) POWERED BY 3176C Engine(SE... Página 3 de 3

Implement relief valve

(2) Retainer assembly

(3) Nut

Use the 1U-9358 Test Block Manifold in order to test implement relief valve (1) on the 4C-4441
Relief Valve Test Tool Gp. The pressure setting for the relief valve is 27600 ± 400 kPa (3900 ± 60
psi).

1. Remove implement relief valve (1) from the combination valve and install implement relief
valve (1) on the 4C-4441 Relief Valve Test Tool Gp .

Note: Refer to Disassembly and Assembly, "Combination Valve - Disassemble" for the
correct procedure to remove the relief valve.

2. Purge the air from the system. The temperature of the oil must be 49° ± 3°C (120° ± 5°F).

3. Apply flow of 38 ± 4 L/min (10 ± 1 US gpm) to the valve and note the pressure that opens the
relief valve.

4. Turn retainer assembly (2) clockwise in order to increase the pressure and turn retainer
assembly (2) counterclockwise in order to decrease the pressure. One turn of the retainer
assembly will change the setting approximately 6300 kPa (915 psi).

5. Repeat Step 2 and repeat Step 4 until you achieve a setting of 27600 ± 400 kPa (3900 ± 60
psi).

6. After you set the retainer assembly to the correct pressure setting, tighten nut (3) to 50 ± 7 N·m
(37 ± 5 lb ft). Hold retainer assembly (2) when you tighten nut (3) .

7. Set the test pressure at 5600 ± 70 kPa (812 ± 10 psi). Maintain the temperature of the oil at 26
°C to 28 °C (79 °F to 82 °F).

8. Measure the leakage oil. If the leakage oil is greater than 0.004 L/min (0.0011 US gpm),
replace the relief valve.

9. Install the relief valve on the combination valve. Refer to Disassembly and Assembly,
"Combination Valve - Assemble" for the correct procedure to install the relief valve.

Copyright 1993 - 2009 Caterpillar Inc. Tue Oct 6 21:28:08 EST 2009
Todos los derechos reservados.
Red privada para licenciados del SIS.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 06/10/2009

You might also like