Whirlpool Europe

SERVICE Customer Services 000 270 52

Service Manual
Dishwasher
integratable
DWF B00 W
000 270 52
Model 000 270 52
Version 8542 406 01860 Page

Technical data 2-4

Spare part list 5-6

Exploded view 7-8

Circuit diagram 9

Program diagram 10

Text/Legend 11 - 16

Family IC - MID 5

This documentation is only intended for qualified technicians who are aware of the respec-
tive safety regulations.
Date: 07.07.2004 (Mod. 01) Subject to modification
Document-No.: 4812 728 11294
04.05.2004 / Page 2 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE

Technical data
Dimension Program information

Height 82.0 - 87.0cm End - Acoustic signal

Width 59.7 cm
Depth 55.5 cm All programs will be locked after start. Changing
Weight 50 kg the program or finishing the program will be
possible only after pressing the start button for
Wooden door for Full Door appliances longer then 1.5 sec. (Break by customer)

Thickness min. 16 mm A switching off the appliance or unplug the

Thickness max. 20 mm appliance for a while, this will frozen the program
Width min. 592 mm step and later on, the program continuos on the
Width max. 595 mm same position.
Height min. 620 mm
Height max. 718 mm Exception: Switching off the appliance or unplug
Weight min. 2.5 kg the appliance during the drying phase, this will lead
Weight max. 6.5 kg directly to the end of the program.
Max. stick out over lower
edge of appliance door 92 mm Water Volume at permanent spray system
Height of plinth min. 93 mm
Water Volume Level
Electronic boards Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Service boards see spare part list Prewash 4.8 l 120 mm
Serial boards see on the boards itself Main wash 4.2 l 118 mm
Programmed control board and programing of
Intermediate rinse 1 4.2 l 118 mm
version , see „Board Service“ and „DATA“ on rating
plate of inner door: Intermediate rinse 2 4.2 l 118 mm
UCB 716531 Clear rinse 4.2 l 118 mm
DLB 473361 Safety/ overflow 8.5 l 141 mm
Data set 716521
Measuring the level
Basic UCB, not programmed
see on the board itself 4619 727 14211
Remove the coarse sieve, put in a measuring
meter into the sump, measure the hight of the
Succession of programs water level.

Programs see program diagram

Detergent max.
Succession P1a-P3a-P5e-P6a-P7a
Pre-wash 10 cm3
Datas Energy Label Main-wash 40 cm3
Rinse aid 135 cm3
Reference program P5e 6 Dosage steps 1-6 ml
Energy Performance A
Cleaning Performance A
Drying Performance C Water softener

Saltcontainer 2 kg
Alarms
Resin container 700 cm3
Refill rinse aid Regeneration dosage 300 cm3
Refill salt
Water pressure
Options
Inlet pressure 0.3 - 10 bar
Half load Spray pump pressure 0.3 bar
 Whirlpool Europe 000 270 52 04.05.2004 / Page 3
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Technical data
Rotations Water safty options

Spray pump motor 2800 RPM Waterstop system Reflex waterstop

Drain pump motor 3000 RPM
Spray arm lower 30 - 40 RPM
Single electric water inlet valve
Spray arm upper 30 - 40 RPM
Voltage 220/ 240 V
Flow rates/ Inlet volume Frequency 50/ 60 Hz
Resistance 3.76 kΩ
Flow meter (at 0.3 bar
= quantity 1.1 l/min) 208 lmp/l
Regenerating valve
Spray pump 45 - 65 l/min
Drain pump 16 l/min
Pump height max. 1.1 m Voltage 220/ 240 V
Inlet valve 4 l/min Frequency 50/ 60 Hz
Spray arm lower ~ 33 l/min Resistance 3.13 kΩ
Sprayarm upper ~ 27 l/min
Shower/ Sprayarm top ~8 l/min Coil of dispenser

Electrical base data Voltage 220/ 240 V

Frequency 50/ 60 Hz
Voltage 220/ 240 V Resistance 1.3 kΩ
Frequency 50 Hz
Total power 2.0 - 2.2 kW Reed contacts
Fuse 10 A
flow meter
Spray pump motor permanent spray system salt control
rinse aid control
Voltage 220/ 240 V
Power consumption 140 W NTC
HI 69 Ω
HA 48 Ω 20 ˚C 58.1 kΩ
Capacitor 4 µF 25 ˚C 47.1 kΩ
30 ˚C 38.2 kΩ
Drain pump motor 40 ˚C 25.4 kΩ
50 ˚C 17.2 kΩ
Voltage 220/ 240 V 60 ˚C 11.8 kΩ
Power consumption 30 W 70 ˚C 8.3 kΩ
Resistance 146 Ω 80 ˚C 6 kΩ
85 ˚C 4 kΩ

Heating - 1 Element system

Voltage 220/ 240 V

Power consumption 1.87/ 2.04 kW
Resistance 24.5 Ω
Heating speed ~ 2.0 ˚C/min
Temperature on surface ~ 115 ˚C
Safety thermostat self reset
(Temperature of water) ~ 85 ˚C
Fuse 206 ˚C
04.05.2004 / Page 4 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE
Technical data

Regeneration

Volume 300 cm3

after wash cycles depending on the water hardness

water hardness 0 - 60 (53) ˚dh
0 - 10.7 mmol/l
0 - 107 ˚Fh

Salt consumption for regeneration ~ 77 g

Number of cycles with 2 kg salt ~ 26

Water softener setting

To change the water softener setting:

• Push the POWER button on
• Change to program 2
• Hold the START button for 5 seconds until the LED is flashing
• Water softener setting is shown by flashing LED
• By pushing the START button you can change the setting
• Push the POWER button off to save and exit the water softener setting

Water hardness German degrees French degrees English degrees mmol/l Water softener setting is
˚dH ˚fH Clarke ˚e shown by flashing LED
1 soft 0-5 0-9 0 - 6,3 0 - 0.9 1x
1 - 2 soft/ medium 6 - 10 10 - 18 7 - 12.6 1 - 1.8 2x
2 medium 11 - 15 19 - 27 13.3 - 18.9 1.9 - 2.7 3x
3 medium/ hard 16 - 21 28 - 37 19.6 - 25.9 2.8 - 3.7 4x
4 hard 22 - 28 38 - 50 26.6 - 35 3.8 - 5.0 5x
4 very hard 29 - 35 51 - 63 35.7 - 44.1 5.1 - 6.3 6x
4 extremely hard 36 - 60 64 - 107 44.8 - 74.9 6.4 - 10.7 7x

Accesory

If you need spare parts apart from the spare part list have a look in the
Service Bulletin 4812 718 40084.
 Whirlpool Europe 000 270 52 04.05.2004 / Page 5
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Spare part list

Model 800 793 44

Service No. 854240601860
Version 854240601860

Pos. No. 12NC Code Description Pos. No. 12NC Code Description

003 0 4812 440 19594 Traverse 405 1 4819 515 28158 Gasket
004 0 4812 440 18952 Drip tray assy 420 0 4812 121 18132 Capacitor
004 1 4812 401 18402 Holder 421 0 4812 121 18158 Interf.filter
011 0 4812 505 18369 Foot long 430 0 4812 360 18508 Pump,draining cpl.
011 1 4812 528 98004 Shaft flexible 430 1 4812 466 68689 Gasket

011 2 4812 528 78032 Slide disc f.foot 450 0 4812 259 28684 Heating element
011 3 4812 535 98054 Gear 480 0 4812 321 28416 Cable harness IC-FD (LS6)
011 4 4812 528 98001 Roll f.foot 480 3 4812 401 18418 Protector f.wiring
022 0 4812 440 19398 Side panel left 490 0 4819 321 18136 Cable,mains 2m SA
022 1 4812 440 19397 Side panel right 490 1 4812 321 28367 Strain relief

024 0 4812 440 10417 Panel, rear 503 0 4812 282 19549 Timer switch delay 3-6-9(DLB)
040 1 4812 417 18774 Hinge left 521 0 4812 218 38236 User board (UCB)
040 2 4812 417 18773 Hinge right 571 0 4812 281 28379 Valve inlet
044 0 4812 492 38362 Spring f.door 575 0 4812 281 28361 Regen.valve
047 0 4812 404 48746 Brake f.door 583 0 4812 271 28407 Switch diaphragm

047 1 4812 401 18397 Band,brake 616 0 4812 281 18047 Contact,reed salt
047 2 4812 404 68023 Hook 616 1 4812 271 58161 Contact,reed rinsing agent
053 0 4812 440 88884 Plinth 621 0 4812 276 18405 Switch ON/OFF
065 0 4812 466 48052 Insulation 623 0 4812 271 38356 Microswitch
103 0 4812 440 19478 Door outer 633 0 4812 271 38355 Microswitch door

105 0 4812 404 48611 Fastener door 680 0 4812 418 68155 Combidosage
105 2 4812 505 68004 Clip 680 1 4812 466 68495 Gasket
105 3 4812 404 48633 Fastener 681 1 4812 466 68497 Gasket
105 4 4812 310 58116 Template FD 681 2 4812 440 18975 Flap
120 0 4812 440 19456 Door,inner 682 0 4812 466 68496 Gasket

120 1 4812 440 18969 Batten 691 0 4812 282 68035 Feeler NTC
130 0 4812 417 58361 Tilt lock cpl. wh 700 3 4812 462 78307 Reductor
131 0 4812 401 18416 Hook lock 701 0 4812 530 28081 Hose, inlet 3/8Z cpl. 5m
175 3 4812 466 68572 Batten 701 0 4812 530 28082 Hose, inlet 3/8Z cpl. 3m
191 0 4812 466 68564 Gasket door 701 1 4812 310 18302 Yoke

192 0 4812 466 68467 Gasket, door lower 701 2 4822 480 50159 Sieve inlet
241 0 4812 458 19027 Basket upper straight 710 0 4812 418 68128 Monoblock
241 1 4812 458 18324 Holder cups right wh 710 2 4819 310 38536 Threaded ring
241 2 4812 310 18757 Holder glasses 710 3 4819 466 69562 Gasket set
241 3 4812 528 88068 Wheel,basket upper (set) 714 0 4812 462 78993 Threaded cap

241 6 4812 458 18333 Holder glasses 716 0 4812 418 68147 Reg.dosage with flowmeter
241 8 4812 466 68553 Spacer cap set 716 1 4812 466 68475 Gasket
242 0 4812 310 28136 Basket lower KIT 716 2 4812 462 78994 Cover
242 1 4812 528 88069 Wheel,basket lower wh 717 1 4812 462 79793 Stopper
242 6 4812 458 18977 Support plate left 721 1 4812 360 68347 Spray arm lower. cpl.

242 7 4812 458 18978 Support plate right 722 0 4812 360 68348 Spray arm upper wh
243 5 4819 310 39859 Cutlery basket KIT 722 2 4812 360 68349 Spray arm 2nd level cpl. wh
243 6 4812 458 18996 Grille wh 723 0 4812 360 68351 Douche ceiling
261 0 4812 462 79831 Rail telescope, inner 723 3 4812 360 68049 Spray arm ceiling
261 1 4812 462 79768 Cap rail rear 726 1 4812 530 29118 Tube assembly cpl.

261 2 4812 310 18972 Cap rail front 726 2 4812 505 18208 Nut
263 0 4819 520 18013 Ball cage cpl. 743 0 4812 511 48171 Condenser
263 1 4812 310 48026 Service kit balls plastic 743 1 4812 530 28102 Hose, inlet
265 0 4812 404 48637 Basket adjustm. cpl. 743 3 4812 505 18364 Nut
265 2 4812 404 48638 Grip basket adjustment 743 4 4812 530 28807 Hose 9x1,5x270+10

301 0 4812 453 71765 Control panel 743 7 4812 466 68514 Gasket
322 0 4812 453 72579 Insert panel 751 0 4812 418 18338 Water collector
332 5 4812 410 28556 Cap f.beater 755 0 4812 530 29119 Bend
400 0 4812 361 58334 Motor +SP,50Hz,per.HP-PNT 755 2 4812 530 48148 Tray,leak
400 1 4812 466 68776 Spacer support motor/sp 756 0 4812 360 58099 Floater
04.05.2004 / Page 6 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE
Spare part list

Model 800 793 44

Service No. 854240601860
Version 854240601860

Pos. No. 12NC Code Description

761 0 4812 480 58122 Sieve fine

761 2 4812 418 18337 Cover sieve
761 3 4812 418 18341 Cover
761 4 4812 530 58141 O-Ring
763 0 4812 480 58123 Sieve coarse

781 0 4812 530 29113 Hose,draining

781 3 4812 281 28417 Flap non-return
783 4 4812 530 28888 Hose
783 6 4812 530 28796 Hose 10x3x180+10
791 0 4812 532 68099 Gasket

791 2 4812 530 58093 Gasket

791 4 4812 466 68503 Gasket
791 5 4812 466 68504 Gasket
901 0 4822 401 10258 Clamp,hose 10-18 mm
901 1 4812 401 18424 Strap 050,0

901 2 4812 401 18157 Strap 32-50/9 C61

901 5 4812 401 48573 Strap 028,6
901 8 4812 401 18075 Strap 20-32/9 mm
902 1 4812 466 78015 Fastener f.buildt-in models
902 2 4812 404 78241 Holder

904 4 4812 462 79659 Threaded cap

910 1 4812 502 38152 Screw 4.8x19
910 2 4812 502 18363 Screw 4,0x12-H
910 3 4812 502 18389 Screw 5x20 T20
910 4 4812 502 18385 Screw M3,5x8-T15M

910 5 4812 502 18393 Screw 3,5x9-1 Tx15

910 7 4812 502 18397 Screw INOX A2 M 5X12
910 8 4812 502 18527 Screw 4x15 T20
964 1 4812 466 68573 Gasket housing upper
993 1 4812 466 78388 Foil protection

993 2 4812 404 48753 Key foot

993 5 4822 532 80216 Funnel salt
993 6 4812 466 78386 Foil protection add.
 Whirlpool Europe 000 270 52 07.07.2004 (Mod. 01) / Page 7
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Exploded view
07.07.2004 (Mod. 01) / Page 8 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE
Exploded view
ASA/ Automatic salt adaption/
WHS Water hardness sensor
C1 Capacitor
CB Control board
CULCD Control unit LCD
DB Display board
Circuit diagram

DUB Display- and User board

SERVICE

DLB Timerswitch Delay

DPM Drain pump motor
DD Cleaning agent dosage
DON Turbidity sensor
DR Final rinse dosage
DS Door switch
DVH Diverter ventil high
DVL Diverter ventil low
FM Flow meter
HEWI Heating
Whirlpool Europe
Customer Service

IF Interference filter
LS6 Water leakage switch
L Line
MS Main switch
NTC Thermostat temp. sensor
N Neutral
OWI Water indicator, optical
PRG Plug to program
RV Water hardness switch
RE2 Heating relay
RR SA Reed relay salt
RR RA Reed relay rinsaid
SPM Sprayarm motor
THS1 Safety thermostat
THS 2 Fuse
000 270 52

TBL Power supply terminal

8542 406 01860

TL Winding protective
contact
UB User board
UCB User- and Control board
VM Fan ventilator
WV1 Water inlet valve
WV2 Water regenerating valve
WI Water indicator

00 black
66 blue
88 grey
99 white
Doc. No: 4812 728 11294
04.05.2004 / Page 9
04.05.2004 / Page 10 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE
Program diagram
 Whirlpool Europe 000 270 52 04.05.2004 / Page 11
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Text/Legend
04.05.2004 / Page 12 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE

Text/Legend
 Whirlpool Europe 000 270 52 04.05.2004 / Page 13
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Text/Legend
04.05.2004 / Page 14 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE

Text/Legend
 Whirlpool Europe 000 270 52 04.05.2004 / Page 15
SERVICE Customer Service 8542 406 01860 Doc. No: 4812 728 11294

Text/Legend
04.05.2004 / Page 16 000 270 52 Whirlpool Europe
Doc. No: 4812 728 11294 8542 406 01860 Customer Service SERVICE

Text/Legend