Graphite 600t
Graphite 600t
Corsair developed the Graphite Series based on the demands of the gaming community. Eschewing the
more staid, subtle lines of the Obsidian series, the Graphite series does away with straight edges and favors
a more streamlined appearance. But it’s not done for show.
The interior of the Graphite Series 600T was designed to be functional and expandable. From the dual
200mm fans, to the eight expansion slots, the Graphite 600T is designed to provide tons of features that
gamers, overclockers, and general system builders will appreciate.
Advanced Cooling
The Corsair Graphite Series 600T focuses heavily on a smarter approach for cooling rather than the more
crude approach of simply adding more fans (and more noise) to the case. The front 200mm intake fan spins
quietly behind a dust filter that’s been optimized to catch dust but permit air to slip through with as little
obstruction as possible. Plentiful cable-routing holes populate the case, virtually guaranteeing cables won’t
negatively affect the airflow to the graphic cards, or a clean, uncluttered look.
This reconfiguration allows for direct airflow from the front intake fan to reach the graphics cards for
superior cooling performance. It’s also possible to remove the lower drive cage, as seen here.
Depending on the motherboard components and clearance issues, in some cases the fans should be
installed outside the case, as shown below. There is sufficient clearance beneath the top filter exhaust for
this.
Routing hole for fan
power
Headphones Microphone