Scribd
Upload
202 views2 pages

Ac Light: User Quick Reference Guide

This document provides instructions for basic arming, disarming, and operating functions of a security system keypad. It explains how to arm areas regularly, with force, or as a stay arm, and how to disarm from within or entering a perimeter. It also describes how to bypass zones, view alarm memory, and use panic keys to silently or audibly alert emergency services. The summary is intended to give an overview of the essential information and functionality described in the user guide.

Uploaded by

Provado No Fogo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
202 views2 pages

Ac Light: User Quick Reference Guide

This document provides instructions for basic arming, disarming, and operating functions of a security system keypad. It explains how to arm areas regularly, with force, or as a stay arm, and how to disarm from within or entering a perimeter. It also describes how to bypass zones, view alarm memory, and use panic keys to silently or audibly alert emergency services. The summary is intended to give an overview of the essential information and functionality described in the user guide.

Uploaded by

Provado No Fogo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

User Quick Reference Guide

AC LIGHT
ON = AC Power The LCD will guide you
OFF = Power failure with detailed messages.

STATUS LIGHT Use the arrow keys to


When green: scroll the menu or choices.
ON = Zones closed
OFF = Zone(s) open
Flash = Exit delay
Press the corresponding
one-touch button for 2
When red:
seconds to perform an
ON = Area(s) armed
action without entering
OFF = Area(s) disarmed
your Access Code.
Flash = Alarm LCD Keypad
[CLEAR] = Erases current data entry or reverts to the preceding step
[ENTER] = Saves current data and exits current menu

HOW TO ARM
1. Enter your [ACCESS CODE] and then:
To Regular Arm: Press the [ARM] key
(Arms entire area when all zones are closed).
To Force Arm: Press the [FORCE] key
(Arms entire area without waiting for all zones to close)
To Stay Arm: Press the [STAY] key
(Arms area’s perimeter only, which allows you to remain in the protected area)
To Instant Arm: Press the [5] key
(Stay arms the area but an alarm will occur instantly any zones open)
2. Select the desired area or press the [0] key for all areas
HOW TO DISARM
To Disarm when entering: To Disarm from within the perimeter:
1. Enter your [ACCESS CODE] 1. Enter your [ACCESS CODE] and then
2. Select the area(s) if necessary press the [DISARM] key
2. Select the area(s) if necessary

PANIC KEYS
To send a silent or audible alarm to your security company, press and hold one of
the key combinations listed below for two seconds.
Panic Alarm Type Key Combinations
Police Keys [1] and [3]
Medical Keys [4] and [6]
Fire Keys [7] and [9]

HOW TO BYPASS ZONES ALARM MEMORY DISPLAY


When a zone is bypassed, it remains To view the alarms that occurred
unarmed once the corresponding area during the last armed period:
is armed: 1. Press the [MEM] key.
1. Enter your [ACCESS CODE] All zones that were breached
2. Press the [BYP] key during the last armed period will
3. Use the [S] or [T] keys to scroll scroll on the screen
through the zones and then press 2. Press [CLEAR] to exit
the [BYP] for the desired zone
4. Press [ENTER] to save and exit
Some features in this Quick Start need to be activated by your installer.
We recommend that you test your security system on a weekly basis. Please refer to the appropriate user
manual

PARADOX.COM

Printed in Canada - 01/2009 K641-EQ07

You might also like