Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Nozzle With Reinforcement Pad: Date: 13/6/21 Client: Iec

    Uploaded by

    גרבר פליקס
    The document is a technical specification for reinforcement of a nozzle on a cylindrical or spherical shell tank subjected to internal overpressure. It provides details on the nozzle dimensions, vessel dimensions, material properties, design pressure, and safety factors. It then calculates the required thickness and area of reinforcement around the nozzle, finding that the actual load exceeds the allowable load and is therefore not acceptable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Nozzle With Reinforcement Pad: Date: 13/6/21 Client: Iec

    Uploaded by

    גרבר פליקס
    12 views1 page
    The document is a technical specification for reinforcement of a nozzle on a cylindrical or spherical shell tank subjected to internal overpressure. It provides details on the nozzle dimensions, vessel dimensions, material properties, design pressure, and safety factors. It then calculates the required thickness and area of reinforcement around the nozzle, finding that the actual load exceeds the allowable load and is therefore not acceptable.

    Original Description:

    tech document

    Original Title

    55

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a technical specification for reinforcement of a nozzle on a cylindrical or spherical shell tank subjected to internal overpressure. It provides details on the nozzle dimensions, vessel dimensions, material properties, design pressure, and safety factors. It then calculates the required thickness and area of reinforcement around the nozzle, finding that the actual load exceeds the allowable load and is therefore not acceptable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views1 page

    Nozzle With Reinforcement Pad: Date: 13/6/21 Client: Iec

    Uploaded by

    גרבר פליקס
    The document is a technical specification for reinforcement of a nozzle on a cylindrical or spherical shell tank subjected to internal overpressure. It provides details on the nozzle dimensions, vessel dimensions, material properties, design pressure, and safety factors. It then calculates the required thickness and area of reinforcement around the nozzle, finding that the actual load exceeds the allowable load and is therefore not acceptable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    AD 2000 MERKBLATT DATE: 13/6/21 CLIENT: IEC

    REINFORCEMENT for CYLINDRICAL AND SPHERICAL SHELLS with Nozzle


    SUBJECTED TO INTERNAL OVERPRESSURE - B1
    NOZZLE WITH REINFORCEMENT PAD SIZE 1.25"

    INPUT
    Actual Thickness of Nozzle 3.6 mm Sn
    Outer Nozzle Diameter 42.4 mm Dn_a
    Ratio Sn/Da 0.00288 < 0.8 OK
    Inner Nozzle Diameter 35.2 mm Din-a
    Width of thickness required aroud
    nozzle for reinforcement 121.8852 mm bA
    Vessel Wall Thickness 12 mm Se_a
    Outside Diameter of the Tank 1250 mm Da
    Inner Diameter of the Tank 1226 mm Di
    Required Thickness of Nozzle 1.38061 mm Si_a
    0.38061 thickness without
    mm allowances
    Allawoble Stress 207 Nmm2 Kd
    Design Pressure 25 bar Pa
    Safety Factor 1.5 Sf
    Joint Efficiency 1 v
    Corrosion Allowance 1 mm c1
    Outside Diameter of PAD mm Dpad
    Inside Diameter of PAD mm dpad
    Thickness of PAD mm tpad
    Length of thickness required in
    nozzle for reinforcement 12.3098 mm Is_i
    92464.08 mm2 Ap
    0.924641 mm2 *10^5
    1461.737 mm2 AƓ0
    32.00549 mm2 AƓ1
    0 mm2 AƓ2

    Total Area 1493.743 mm2 AƓ


    LB 156.0024 Nmm2 Actual
    PB 138 Nmm2 Allowable
    LB < PB NOT OK

    You might also like