TransXpress

SMA1K-CP
Single-board STM-1 Multiplexer

Traffic interfaces

STM-1 Optical
bitrate . . . . . . . . . . . . .155 520 kbit/s
according to . . . . . . . . . ITU-T G.957
user class . . . . . . . . . . . . . . . . . L-1.1
wavelength range . . . . . . . .1280 nm
to 1330nm
attenuation range . . . . . . .0 to 28 dB
dispersion . . . . . . . . max. 185 ps/nm
number of interfaces . . . . . . . .1 or 2
connector . . . . . . . . . . . . . . . E2000
adapters to DIN, FC/PC or SC

STM-1 Electrical (optional)

according to . . . . . . . . . ITU-T G.703
bitrate . . . . . . . . . . . . .155 520 kbit/s
code . . . . . . . . . . . . . . . . . . . . . CMI
number of interfaces . . . . . . . . . . . .1
connector . . . . . . . . . . . . micro-coax Service Operating Interfaces
Service Operating Interfaces
Ethernet LAN Interfaces (optional)
according to . . . . . . . . . .IEEE 802.3 34 Mbit/s Electrical (optional) Network Clock Synchronization
type . . . . . . . . . .10BaseT / 100BaseT according to . . . . . . . . . ITU-T G.703 input/output frequency . . . 2 048 kHz
auto-sensing bitrate . . . . . . . . . . . . . 34 368 kbit/s references . . . . G.703/ ETS 300 166
number of interfaces . . . . . . . . . . . .2 code . . . . . . . . . . . . . . . . . . . . HDB3 ETS 300 462
connector . . . . . . . . . . . . . . . . RJ45 number of interfaces . . . . . . . . . . . .1 number of input/output ports . . . .1/1
connector . . . . . . . . . . . . micro-coax
2 Mbit/s Electrical
according to . . . . . . . . . ITU-T G.703 45 Mbit/s Electrical (optional)
bitrate . . . . . . . . . . . . . . 2 048 kbit/s according to . . . . . . . . . ITU-T G.703
code . . . . . . . . . . . . . . . . . . . . HDB3 bitrate . . . . . . . . . . . . . 44 736 kbit/s
number of interfaces . . . . . . . . . . .12 code . . . . . . . . . . . . . . . . . . . . B3ZS
connector . . . . . . . . . . . . . . . . RJ45 number of interfaces . . . . . . . . . . . .1
connector . . . . . . . . . . . . micro-coax
 Power supply

DC Input
External Data Channel Dimensions in mm (WxHxD)
bitrate . . . . . . . . . . . . . . . . . 64 kbit/s DC input ports . . . . . . . . . . . . . . . .1 multiplexer module . . . .445x44x223
electrical parameters . . . . . ITU-T V.11 Nominal values . . . . . . . 48 V or 60 V AC/DC power converter with
internal receiver/load impedance 150 Ω input range . . . . . . . . . -40.5 to -75 V battery backup . . . . . . . .445x44x223
number of interfaces . . . . . . . . . . . .1 desktop housing . . . . .495x108x223
External Alarms AC Input (optional)
number of input ports . . . . . . . . . . .8 AC input ports . . . . . . . . . . . . . . . .1
input voltage . . . . . . . . . . . 0 to -75 V input voltage . . . . . . . . . 85 to 265 V System architecture
current range . . . . . . .1 mA to 5 mA input frequency . . . . . . . 47 to 63 Hz The high integration and state-of-
number of output ports . . . . . . . . . .2 battery holdover time . . . . . 2.5 hour the-art technology ensure a single
max. current, active state . . . 130 mA card design. All functionality, i.e.
Power Consumption switching, clock, controller, line and
F Interface for Craft Terminal Typical . . . . . . . . . . . . . . . . . . . .18 W tributary interfaces are integrated
bitrate . . . . . . . . . . . . . . . . 9.6 kbit/s Maximum . . . . . . . . . . . . . . . . 25 W onto a single main card. Up to 12x2
interface type . . . . . . . . . . . . RS-232 Mbit/s tributaries ports are available
ITU-T V.24/V.28 on the main card. Additional 1x34
number of interfaces . . . . . . . . . . . .1 Environmental requirements Mbit/s, 1x45Mbit/s or 2x10/100
and dimensions BaseT ports can be provided by a
daughter board mounted on the
Protection Climatic Conditions main board.
Operating . . ETS 300 019 Class 3.1e The STM-1 line interface can be
1+1 Multiplex Section Protection Storage . . . . . ETS 300 019 Class 1.2 duplicated to ensure traffic protection
switchover time . . . . . . . . . . <50 ms Transport . . . . ETS 300 019 Class 2.3 or add/drop functionality.
operation mode . . . . . . . . automatic, All other functionality, such as user
manual, revertive, Electromagnetic Compatibility alarm and data channel are also pro-
non-revertive radio noise field strength vided by the main board.
SNC/P Path Protection . . . . . . . . . EC directive 89/336/EC5
switchover time . . . . . . . . . .<20 ms interference immunity against EMI
plus adjustable persistence time . . . . . . . . . . . . . . . . IEC 801-2, -4, -6
between 0 to 10 s Electrostatic discharge . . . .IEC 801-2
operation mode . . . . . . . . automatic,
manual, non-revertive

optical switching optical STM-1

Transceiver Matrix Transceiver

STM-1

V.11/TIF/
Power
BW7R/
Supply
Sync.
Optional
AC/DC
Subject to availability • Right of modification reserved.

converter
optional baby-board
12 x 2 Mbit/s 2x10/100 BaseT or
1x34 Mbit/s or 1x45 Mbit/s

Order No. A50001-N11-P16-2-7600 a • Printed in the Federal Republic of Germany • CN SIE_637_00 PA 10002.

COPYRIGHT© • Siemens AG 2000 • Information and Communication Networks • Hofmannstr. 51 • 81359 Munich • Germany •