Concentric Hollow Shaft and Concentric Solid Shaft

F3 Series
Gearmotor / Reducer

F3
■Gearmotor / Gearmotor with Brake / Water-resistant,
 Outdoor (IP65) Gearmotor / Gearmotor with Brake
 Model and Type Designation 0.1kW‒0.4kW P. D4
Model and Type Designation 0.75ｋW‒2.2ｋW IE3 (Premium Efficiency) P. D5
Model and Type Designation 0.75ｋW‒2.2ｋW IE1 (Standard Efficiency) P. D6
Concentric Hollow Shaft Standard Model Lineup Indoor Type P. D8 Series
Concentric Hollow Shaft Standard Model Lineup Water-resistant Type P. D9
Concentric Solid Shaft Standard Model Lineup Indoor Type P. D10
Concentric Hollow Shaft 3-Phase Performance Table P. D14
Concentric Solid Shaft 3-Phase Performance Table P. D18
Concentric Hollow Shaft 3-Phase Outer Dimension Diagram P. D22
Concentric Solid Shaft 3-Phase Outer Dimension Diagram P. D34

■1-Phase Gearmotor / Gearmotor with Brake

Concentric Hollow Shaft 1-Phase Performance Table P. D42
Concentric Hollow Shaft 1-Phase Outer Dimension Diagram P. D44

■Reducer (Double Shaft Type)

Concentric Hollow Shaft Model and Type Designation P. D50
Concentric Hollow Shaft Standard Model Lineup P. D51
Concentric Hollow Shaft Performance Table P. D54
Concentric Hollow Shaft Outer Dimension Diagram P. D56

■S-Type Reducer (Designated Motor Attachable Type)

Concentric Hollow Shaft Model and Type Designation P. D62
Concentric Hollow Shaft Standard Model Lineup P. D63
Concentric Hollow Shaft Performance Table P. D66
Concentric Hollow Shaft Outer Dimension Diagram P. D68

D1
D2
 Concentric Hollow Shaft and Concentric Solid Shaft
Gearmotor
Gearmotor with Brake
Water-resistant, Outdoor
Gearmotor
Gearmotor with Brake
Model and Type Designation
Standard Model Lineup
F3
Series

Number of Phase 3-Phase 1-Phase

Capacity 0.1kWー2.2kW 100Wー400W

Standard Voltage（3 rated）200V/50Hz、200V/60Hz、220V/60Hz Standard Voltage 100V/50Hz、100V/60Hz

Power Source High Voltage（4 rated）380V/50Hz、400V/50Hz、400V/60Hz、 High Voltage 200V/50Hz、200V/60Hz
440V/60Hz
Motor
Insulation Classification Class B Class B
Starting Method Direct Start Capacitor Start（100W Capacitor operated）
Protective Cooling Method Totally enclosed fan-cooled (totally enclosed only for 0.1kW without brake) Totally enclosed fan-cooled

Number of Pole 4
R a t i n g Continuous Rating
Reduction Method Hypoid Gear and Helical Gear
Lubrication Method Grease Lubrication (Maintenance Free)
Reducer Output Shaft New JIS Key (JIS 1301-1996 Standard) Note) Key materials are included with the Concentric Solid Shaft Type.
Output Shaft Material S43C
Case Material Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
Ambient Temperature −10℃‒+40℃ (Note)
Ambient Humidity 85% Max. (Without Any Dew Condensation)

Ambient Altitude 1,000m Max.

Conditions Well ventilated place free from corrosive gas,
Environment
explosive gas, vapors and/or dust.

Installation Location Indoors

Painting Method Anion Painting, Acrylic Paint
Painting
Painting Color Grey (Munsell code: 9B6/0.5)
Mounting Direction No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles
Note) 0℃‒40℃ for the S100 motor (capacitor operated)

D3
 Model and Type Designation
Type Designation
Model and

F3 Series F3S Type (Concentric Hollow Shaft)

F3F Type (Concentric Solid Shaft)

0.1kW−0.4kW
F3 series 0.1kW‒0.4kW gearmotors and gearmotors with a brake are classified by
codes as shown below. Specify these codes in your inquiry and order.
Series Mount Motor Type Frame Shaft Reduction Motor Capacity Option Terminal Box Auxiliary Mark Spec. Designation
Number Location Ratio
F3 S M 25 80 T010 A
F3 F B 32 R 120 T040 W Z
F3 S W 45 450 T020 P E X AB
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
①Series Name F3 ：F3 Series
（Concentric Hollow Shaft, Concentric Solid Shaft）
S ：Concentric Hollow Shaft
②Classification by Mount Form
F ：Concentric Solid Shaft
M ：Without Brake
B ：With Brake
J ：With Brake Manual Release Device（Option）
③Classification by Motor Type
Note) Only hollow shafts are available for
W ：With Water-resistant Motor（Output Shaft Material SUS420J2) IP65
Water-resistant and Outdoor Types. V ：With Water-resistant Brake（Output Shaft Material SUS420J2）IP65
G ：With Outdoor Motor（Output Shaft Material S43C）IP65
H ：With Outdoor Brake Motor（Output Shaft Material S43C）IP65
④Frame No. and Diameter of Output Shaft Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
Hollow Shaft Solid Shaft
Gear Head

⑤Output Shaft Placement Marks

Motor
With the output shaft protruding from the left With the output shaft protruding from the right With the output shafts protruding from both sides
when looking from the input shaft side (  ) when looking from the input shaft side (  ) when looking from the input shaft side (  )

Blank L R T
⑥Reduction Ratio 5 : 1／5 − 1500 : 1／1500
T010 ：3-Phase 0.1kW
T020 ：3-Phase 0.2kW
T040 ：3-Phase 0.4kW
⑦Motor Capacity
S100 ：1-Phase 100W（capacitor operated）
200 ：1-Phase 200W（capacitor operated）
400 ：1-Phase 400W（capacitor operated）
Indoor Specification Water-resistant, Outdoor Specification
⑧⑨Options
・Power Supply Voltage A ：Standard Voltage With A Model Terminal Box E ：Standard Voltage With E Model Terminal Box
（* Please inquire regarding other 3-Phase ： 200V／50Hz, 200V／60Hz, 220V／60Hz 3-Phase：200V／50Hz, 200V／60Hz, 220V／60Hz
voltages/frequencies.） WA ：High Voltage With A Model Terminal Box WE ：High Voltage With E Model Terminal Box
3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz 3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz,
・Terminal Box
1-Phase：200V／50Hz, 200V／60Hz 440V／60Hz
 Please specify A or Z for indoor specifications.
Note 1）A-Type Terminal Box is standard for
PA ： High Voltage With A Model Terminal Box For 400V Brake Specifications ＊Excluding 50W PE ： High Voltage With E Model Terminal Box For 400V Brake Specifications ＊Excluding 50W
3-phase. 3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz 3-Phase ：
Always add ""A"" as the suffix to the model. (Note) High Voltage with 200V brake specifications is "WA" (Note) High Voltage with 200V brake specifications is "WE"
When the field is blank, there is no terminal
box (lead type). Z ：Standard Voltage With Z Model Terminal Box（For Use with Models with a Brake Built-in Rectifier Type）
Refer to the following pages for terminal box
specifications.
3-Phase：200V／50Hz, 200V／60Hz, 220V／60Hz
• Without Brake: Page E19 Note 3）
• With Brake Motor: Page E25
• Built-in Rectifier: Page E26-E30 WZ ：High Voltage With Z Model Terminal Box（For Use with Models with a Brake Built-in Rectifier Type）
3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz
Note 2）1-phase with a terminal box can be acquired
through special order. Note 3）
Refer to〈pages E25〉for more information.
Blank ：Standard Voltage Without Terminal Box
Note 3）When an inverter is used, always provide 3-Phase：200V／50Hz, 200V／60Hz, 220V／60Hz
instructions for "AC Switching (A)" (custom
specification) when submitting an order. 1-Phase：100V／50Hz, 100V／60Hz
An inverter cannot be used with "AC
Switching (B)" and "DC Switching".
W ：High Voltage Without Terminal Box
Refer to〈pages E26, E27 and E52〉for 3-Phase：200V／50Hz, 200V／60Hz, 220V／60Hz
more information.
This option is only available with 200V
1-Phase：100V／50Hz, 100V／60Hz
brake specifications. P ： High Voltage Without Terminal Box For 400V Brake Specifications ＊Excluding 50W
The option is not available on 400V brake
specifications. 3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz
(Note) High Voltage with 200V brake specifications is "W"

Blank : Standard Specifications

⑩Auxiliary Mark
X ：Mark for Special Additional Specs
Terminal Box Positioning Mark
⑪Spec. Designation
Please refer to the lists of specification marks on〈page E40−E51〉for details.
D4
 Type Designation
Model and
0.75kW−2.2kW IE3 (Premium Efficiency)
F3 series 0.75kW‒2.2kW gearmotors and gearmotors with a brake are classified by
codes as shown below. Specify these codes in your inquiry and order.
Brake
Gear Head Type Motor Model Specs. Option

Frame Shaft Reduction Number of Power Supply Terminal Auxiliary Spec.

Series Mount Number Location Ratio Motor Type Motor Specs. Capacity Phase Voltage Standard Box Brake Mark Designation

F3 S 45 N 5 M P 08 T N N T N
F3 F 32 T 20 M P 15 T W N T B4 X AA
F3 S 45 S 30 W P 22 T N N E N X T9HZ
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮

①Series Name F3 ：F3 Series（Concentric Hollow Shaft, Concentric Solid Shaft）

S ：Concentric Hollow Shaft
②Classification by Mount Form
F ：Concentric Solid Shaft
③Frame No. and Diameter of Output Shaft Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
Shaft Material Hollow Shaft Solid Shaft
L R T

④Output Shaft Material S43C N

With the output shaft protruding from the left With the output shaft protruding from the right With the output shafts protruding from both sides
when looking from the input shaft side (  ) when looking from the input shaft side (  ) when looking from the input shaft side (  )

SUS420J2 S ─ ─ ─
⑤Reduction Ratio 5 : 1／5 − 450 : 1／450
M ：Induction Standard Motor (IP44)
⑥Classification by Motor Type
W ：Induction Water-resistant Motor (IP65)
⑦Motor Specs. P ：IE3 Efficiency (Premium Efficiency)
08 ：3-Phase 0.75kW
⑧Motor Capacity 15 ：3-Phase 1.5kW
22 ：3-Phase 2.2kW
⑨Number of Phase T ：3-Phase
N ：Standard Voltage  3-Phase 3Rated 200V／50Hz, 200V／60Hz, 220V／60Hz
⑩Power Supply Voltage
W ：High Voltage 3-Phase 3Rated 380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz
⑪Standard N ：Japanese, European (CE Marking)
T ：T Model Terminal Box (Steel Plate)
⑫Terminal Box E ：E Model Terminal Box (Aluminium)
For models with a brake, the brake lead wire is housed inside the terminal Box. Please refer to〈page E25〉.
N ：Without Brake
B2 ：200V Brake Specification
B4 ：400V Brake Specification
⑬Brake Specs
V2 ：Water-resistant 200V Brake Specification
Note) There are no 1.5kW or 2.2kW
   gearmotors with a brake. V4 ：Water-resistant 400V Brake Specification
J2 ：With Brake Manual Release Device (Option) 200V Brake Specification
J4 ：With Brake Manual Release Mechanism (Option) 400V Brake Specification
Blank：Standard Specifications
⑭Auxiliary Mark
X ：Mark for Special Additional Specs
Built-in Rectifier Hardwiring Indication Mark
 Please refer to the list of specification marks on〈page E28-E29〉for details.
⑮Spec. Designation
Terminal Box Positioning Mark
 Please refer to the list of specification marks on〈page E40-E51〉for details

D5
 Model and Type Designation
Type Designation
Model and

F3 Series F3S Type (Concentric Hollow Shaft)

F3F Type (Concentric Solid Shaft)

0.75kW−2.2kW IE1 (Standard Efficiency)

F3 series 0.75kW‒2.2kW gearmotors and gearmotors with a brake are classified
by codes as shown below. Specify these codes in your inquiry and order.
Frame Shaft Reduction Terminal Auxiliary Spec.
Series Mount Motor Type Number Location Ratio Capacity Option Box Mark Designation

F3 S M 45 80 075
F3 F B 55 R 120 150 W X AA
F3 S W 55 100 220 P E X T9HZ
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
①Series Name F3 ：F3 Series
（Concentric Hollow Shaft, Concentric Solid Shaft）
S ：Concentric Hollow Shaft
②Classification by Mount Form
F ：Concentric Solid Shaft
M Without Brake
B ：With Brake
J ：With Brake Manual Release Device（Option）
③Classification by Motor Type
Note) Only hollow shafts are available for
W ：With Water-resistant Motor（Output Shaft Material SUS420J2) IP65
Water-resistant and Outdoor Types. V ：With Water-resistant Brake（Output Shaft Material SUS420J2）IP65 Note）0.75kW only
G ：With Outdoor Motor（Output Shaft Material S43C）IP65
H ：With Outdoor Brake Motor（Output Shaft Material S43C）IP65 Note）0.75kW only
④Frame No. and Diameter of Output Shaft Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
Hollow Shaft Solid Shaft
Gear Head
⑤Output Shaft
 Placement Marks Motor
With the output shaft protruding from the left With the output shaft protruding from the right With the output shafts protruding from both sides
when looking from the input shaft side (  ) when looking from the input shaft side (  ) when looking from the input shaft side (  )

Blank L R T
⑥Reduction Ratio 5 : 1／5 − 1500 : 1／1500
075 ：3-Phase 0.75kW
⑦Motor Capacity 150 ：3-Phase 1.5kW
220 ：3-Phase 2.2kW
Indoor Specification Water-resistant, Outdoor Specification Terminal Box
Blank：Standard Voltage With Terminal Box E ：Standard Voltage E Model Terminal Box
3-Phase： 200V／50Hz, 200V／60Hz, 220V／60Hz 3-Phase：200V／50Hz, 200V／60Hz, 220V／60Hz
1-Phase： 100V／50Hz, 100V／60Hz
⑧⑨Options
・Power Supply Voltage W ：High Voltage With Terminal Box WE：High Voltage E Model Terminal Box
 (＊Please inquire regarding other voltages/frequencies.) 3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz 3-Phase： 380V／50Hz, 400V／50Hz, 400V／60Hz,
1-Phase：100V／50Hz, 100V／60Hz 440V／60Hz
P ：High Voltage With Terminal Box For 400V Brake Specifications PE ：High Voltage E Model Terminal Box
3-Phase：380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz 3-Phase： 380V／50Hz, 400V／50Hz, 400V／60Hz, 440V／60Hz
(Note) High Voltage with 200V brake specifications is "W" (Note) High Voltage with 200V brake specifications is "WE"
Blank : Standard Specifications
⑩Auxiliary Mark
X ：Mark for Special Additional Specs
Terminal Box Positioning Mark
⑪Spec. Designation
Please refer to the lists of specification marks on〈page E40-E51〉for details.

D6
Model and
Type Designation

D7
 Standard Model Lineup
Lineup
Standard Model

F3 Series F3S Type（Concentric Hollow Shaft）

Indoor Type

F3S Type (Concentric Hollow Shaft) Model Lineup

4P Motor Frame Reduction Ratio
Type Capacity Number

3-Phase 0.1kW

1-Phase 100W
Note 1）

Note 2）

3-Phase 0.2kW

1-Phase 200W

Note 2）

3-Phase 0.4kW
Gearmotor
1-Phase 400W

Gearmotor
with Brake
Note 2）

Gearmotor Equipped 3-Phase 0.75kW

with Brake Manual
Release Device
(Optional Specs.)

Note 2）

3-Phase 1.5kW

3-Phase 2.2kW

Note 1）High reduction ratio (1/300 and above) is not available for 1-Phase 100W.
2）A small frame no. type.
3）The models enclosed with "   " are the low torque type. Special care should be given to
the allowable torque in the performance table.

D8
 Lineup
Standard Model
Standard Model Lineup
Water-resistant Type

F3S Type (Concentric Hollow Shaft) Model Lineup

4P Motor Frame Reduction Ratio
Type Capacity Number

Water-resistant 3-Phase 0.1kW

Gearmotor

Water-resistant Note 1）
Gearmotor with
Brake
3-Phase 0.2kW

Outdoor Gearmotor

Outdoor Note 1）
Gearmotor with
Brake
3-Phase 0.4kW

Water-resistant Note 1）
Gearmotor

3-Phase 0.75kW
Water-resistant
Gearmotor with
Brake

Note 1）

3-Phase 1.5kW

Water-resistant
Gearmotor

3-Phase 2.2kW

Note 1）A small frame no. type.

2）The models enclosed with "   " are the low torque type. Special care should be given to
the allowable torque in the performance table.

D9
 Standard Model Lineup
Lineup
Standard Model

F3 Series F3F Type（Concentric Solid Shaft）

Indoor Type

F3F Type (Concentric Solid Shaft) Model Lineup

4P Motor Frame Output Shaft Reduction Ratio
Type Capacity Number Positioning

3-Phase 0.1kW

Note 1）

3-Phase 0.2kW

Note 1）

Gearmotor

3-Phase 0.4kW

Gearmotor
with Brake

Gearmotor Equipped
with Brake Manual Note 1）
Release Device
(Optional Specs.)
3-Phase 0.75kW

Note 1）

3-Phase 1.5kW

3-Phase 2.2kW

Note 1）A small frame no. type.

2）The models enclosed with "   " are the low torque type. Special care should be given to
the allowable torque in the performance table.

D10
Standard Model

D11
Lineup
D12
 Concentric Hollow Shaft and Concentric Solid Shaft
Gearmotor
Gearmotor with Brake
Water-resistant, Outdoor
Gearmotor
Gearmotor with Brake
Performance Table / F3
Series

Dimension Diagram F3S

Type

F3F
Type

3-Phase
【Remarks】
●Values in the parenthesis in the performance table / dimension diagram are the values of gearmotor with brake.
●The output shaft rotation speed is the value corresponding to the motor synchronous speed and the nominal reduction ratio.
●The key for the outout shaft is not attached to this model.
●The areas shaded with     in the performance table show that rotation occurs clockwise as viewed from the side with arrow Ⓐ in
the diagram below if hardwired as shown on〈page E18,E34〉(normal rotation).
●In the case of the Concentric Hollow Shaft, the L shaft rotates clockwise, and the R and T shafts rotate counterclockwise as viewed
from the output shaft.

L Shaft R Shaft T Shaft

D13
Lineup
Standard Model
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake 3-Phase Performance Table

0.1kW−0.4kW

Output Shaft Output Shaft Output Shaft Output Shaft Outer Dimension
Allowable
Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual Thrust Load
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ Indoor Type
N Kgf N Kgf
Water-resistant Type
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
＊1/240 1/240 6.3 7.5 101 98 10.3 10 2550 260 637 65
1/200 1/200 7.5 9 98 81 10 8.3 2550 260 637 65
1/160 1/160 9.4 11.3 78 66 8 6.7 2550 260 637 65 P.D22
25
1/120 1/120 12.5 15 59 49 6 5 2550 260 637 65 P.D28
1/100 19/1880 15 18 49 41 5 4.2 2550 260 637 65
1/80 1/80 18.8 22.5 39 32 4 3.3 2550 260 637 65
1/60 1/59 25 30 31 25 3.2 2.6 1860 190 471 48
200 50 0.61 1420 1/50 1/50 30 36 25 22 2.6 2.2 1860 190 471 48
3-Phase
200 60 0.54 1700 1/40 1/40 37.5 45 21 18 2.1 1.8 1810 185 451 46
0.1kW
220 60 0.54 1720 1/30 2/59 50 60 16 13 1.6 1.3 1670 170 422 43
1/25 1/25 60 72 13 11 1.3 1.1 1570 160 392 40
P.D22
20 1/20 1/20 75 90 11 8.6 1.1 0.88 1470 150 373 38
P.D28
1/15 1/15 100 120 7.7 6.5 0.79 0.66 1320 135 333 34
1/12.5 2/25 120 144 6.5 5.4 0.66 0.55 1270 130 316 32
1/10 1/10 150 180 5.2 4.3 0.53 0.44 1180 120 294 30
1/7.5 2/15 200 240 3.8 3.2 0.39 0.33 1080 110 270 28
1/5 1/5 300 360 2.5 2.2 0.26 0.22 980 100 244 25
＊1/240 1/240 6.3 7.5 184 184 18.8 18.8 3140 320 785 80
＊1/200 1/200 7.5 9 184 175 18.8 17.9 3140 320 785 80
1/160 1/160 9.4 11.3 169 140 17.9 14.3 3140 320 785 80 P.D23
30
1/120 1/120 12.5 15 126 105 12.9 10.7 3140 320 785 80 P.D29
1/100 19/1880 15 18 105 87 10.7 8.9 3140 320 785 80
1/80 1/80 18.8 22.5 84 71 8.6 7.2 3090 315 775 79
1/60 1/60 25 30 67 55 6.8 5.6 2550 260 637 65
1/50 1/50 30 36 55 46 5.6 4.7 2450 250 613 63
1/40 1/40 37.5 45 44 37 4.5 3.8 2300 235 576 59
1/30 1/30 50 60 33 27 3.4 2.8 2110 215 527 54
1/25 1/25 60 72 27 24 2.8 2.4 2010 205 502 51
P.D22
200 50 1.1 1420 25 1/20 1/20 75 90 23 19 2.3 1.9 1860 190 466 48
3-Phase P.D28
200 60 1.0 1710 1/15 1/15 100 120 17 14 1.7 1.4 1720 175 429 44
0.2kW
220 60 1.0 1720 1/12.5 19/235 120 144 14 12 1.4 1.2 1620 165 405 41
1/10 1/10 150 180 11 9.2 1.1 0.94 1520 155 380 39
1/7.5 2/15 200 240 8.3 7 0.85 0.71 1370 140 342 35
1/5 1/5 300 360 5.5 4.6 0.56 0.47 1230 125 307 31
1/30 2/59 50 60 33 27 3.4 2.8 1670 170 422 43
1/25 1/25 60 72 27 24 2.8 2.4 1570 160 392 40
1/20 1/20 75 90 23 19 2.3 1.9 1470 150 373 38
20 1/15 1/15 100 120 17 14 1.7 1.4 1320 135 333 34 P.D22
（Small Frame No.）
1/12.5 2/25 120 144 14 12 1.4 1.2 1270 130 316 32 P.D28
1/10 1/10 150 180 11 9.2 1.1 0.94 1180 120 294 30
1/7.5 2/15 200 240 8.3 7 0.85 0.71 1080 110 270 28
1/5 1/5 300 360 5.5 4.6 0.56 0.47 980 100 244 25
＊1/240 1/240 6.3 7.5 270 270 27.6 27.6 3630 370 912 93
＊1/200 1/200 7.5 9 270 270 27.6 27.6 3630 370 912 93
＊1/160 1/160 9.4 11.3 270 270 27.6 27.6 3630 370 912 93 P.D24
35
1/120 1/120 12.5 15 253 211 25.8 21.5 3530 360 883 90 P.D30
1/100 19/1880 15 18 211 175 21.5 17.9 3530 360 883 90
1/80 1/80 18.8 22.5 169 140 17.2 14.3 3480 355 873 89
1/60 1/60 25 30 133 111 13.6 11.3 3090 315 767 78
1/50 1/50 30 36 111 92 11.3 9.4 2990 305 747 76
1/40 1/40 37.5 45 88 74 9 7.5 2840 290 711 73
1/30 1/30 50 60 67 55 6.8 5.6 2650 270 662 68
1/25 1/25 60 72 55 46 5.6 4.7 2550 260 637 65
P.D23
200 50 2.1 1410 30 1/20 1/20 75 90 44 37 4.5 3.8 2400 245 600 61
3-Phase P.D29
200 60 1.8 1690 1/15 1/15 100 120 33 27 3.4 2.8 2160 220 539 55
0.4kW
220 60 1.8 1710 1/12.5 19/235 120 144 27 24 2.8 2.4 2060 210 506 52
1/10 1/10 150 180 23 19 2.3 1.9 1910 195 475 48
1/7.5 2/15 200 240 17 14 1.7 1.4 1760 180 438 45
1/5 1/5 300 360 11 9.2 1.1 0.94 1520 155 375 38
1/30 1/30 50 60 67 55 6.8 5.6 2110 215 527 54
1/25 1/25 60 72 55 46 5.6 4.7 2010 205 502 51
1/20 1/20 75 90 44 37 4.5 3.8 1860 190 466 48
25 1/15 1/15 100 120 33 27 3.4 2.8 1720 175 429 44 P.D22
（Small Frame No.）
1/12.5 19/235 120 144 27 24 2.8 2.4 1620 165 405 41 P.D28
1/10 1/10 150 180 23 19 2.3 1.9 1520 155 380 39
1/7.5 2/15 200 240 17 14 1.7 1.4 1370 140 342 35
1/5 1/5 300 360 11 9.2 1.1 0.94 1230 125 307 31

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D14
 Lineup
Standard Model
0.75kW−2.2kW IE3 (Premium Efficiency)

Output Shaft Output Shaft Output Shaft Output Shaft Outer Dimension
Allowable
Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual Thrust Load
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ Indoor Type
N Kgf N Kgf
Water-resistant Type
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
＊1/240 1/240 6.3 7.5 554 554 56.5 56.5 5190 530 1275 130
＊1/200 1/200 7.5 9 554 554 56.5 56.5 5190 530 1275 130
＊1/160 1/160 9.4 11.3 554 526 56.5 53.7 5190 530 1275 130 P.D25
45
1/120 1/120 12.5 15 473 395 48.3 40.3 4750 485 1177 120 P.D31
1/100 19/1880 15 18 395 328 40.3 33.5 4750 485 1177 120
1/80 1/80 18.8 22.5 316 263 32.2 26.8 4750 485 1177 120
1/60 1/60 25 30 249 208 25.4 21.2 3480 355 870 89
1/50 1/50 30 36 208 173 21.2 17.7 3480 355 870 89
1/40 1/40 37.5 45 166 138 16.9 14.1 3480 355 870 89
1/30 1/30 50 60 124 104 12.7 10.6 3280 335 821 84
1/25 1/25 60 72 104 86 10.6 8.8 3190 325 796 81
P.D24
200 50 3.2 1440 35 1/20 1/20 75 90 83 70 8.5 7.1 2990 305 747 76
3-Phase P.D30
200 60 3.0 1720 1/15 1/15 100 120 63 52 6.4 5.3 2740 280 686 70
0.75kW
220 60 2.9 1740 1/12.5 19/235 120 144 52 43 5.3 4.4 2600 265 669 68
1/10 1/10 150 180 41 34 4.2 3.5 2450 250 613 63
1/7.5 2/15 200 240 31 25 3.2 2.6 2250 230 567 58
1/5 1/5 300 360 21 18 2.1 1.8 1960 200 500 51
1/30 1/30 50 60 124 104 12.7 10.6 2650 270 662 68
1/25 1/25 60 72 104 86 10.6 8.8 2550 260 637 65
1/20 1/20 75 90 83 70 8.5 7.1 2400 245 600 61
30 1/15 1/15 100 120 63 52 6.4 5.3 2160 220 539 55 P.D23
（Small Frame No.）
1/12.5 19/235 120 144 52 43 5.3 4.4 2060 210 506 52 P.D29
1/10 1/10 150 180 41 34 4.2 3.5 1910 195 475 48
1/7.5 2/15 200 240 31 25 3.2 2.6 1760 180 438 45
1/5 1/5 300 360 21 18 2.1 1.8 1520 155 375 38
＊1/240 1/240 6.3 7.5 1264 1264 129 129 9800 1000 2452 250
＊1/200 1/200 7.5 9 1264 1264 129 129 9020 920 2256 230
1/160 1/160 9.4 11.3 1264 1049 129 107 8330 850 2059 210 P.D27
55
1/120 1/120 12.5 15 947 789 96.6 80.5 7500 765 1863 190 P.D32
1/100 1/100 15 18 789 658 80.5 67.1 6420 655 1618 165
1/80 1/80 18.8 22.5 631 526 64.4 53.7 6420 655 1618 165
1/60 1/60 25 30 498 416 50.8 42.4 4750 485 1067 109
1/50 1/50 30 36 416 345 42.4 35.2 4750 485 1067 109
1/40 1/40 37.5 45 332 276 33.9 28.2 4750 485 1067 109
1/30 1/30 50 60 249 208 25.4 21.2 4750 485 1067 109
1/25 1/25 60 72 208 173 21.2 17.7 4700 480 1067 109
P.D25
200 50 6.4 1450 45 1/20 1/20 75 90 166 138 16.9 14.1 4460 455 1067 109
3-Phase P.D31
200 60 6.0 1740 1/15 1/15 100 120 124 104 12.7 10.6 4070 415 1067 109
1.5kW
220 60 5.7 1750 1/12.5 19/235 120 144 104 86 10.6 8.8 3920 400 1040 106
1/10 1/10 150 180 83 70 8.5 7.1 3630 370 967 99
1/7.5 2/15 200 240 63 52 6.4 5.3 3330 340 900 92
1/5 1/5 300 360 41 34 4.2 3.5 2940 300 800 82
1/30 1/30 50 60 249 208 25.4 21.2 3280 335 821 84
1/25 1/25 60 72 208 173 21.2 17.7 3190 325 796 81
1/20 1/20 75 90 166 138 16.9 14.1 2990 305 747 76
35 1/15 1/15 100 120 124 104 12.7 10.6 2740 280 686 70 P.D24
（Small Frame No.）
1/12.5 19/235 120 144 104 86 10.6 8.8 2600 265 669 68 P.D30
1/10 1/10 150 180 83 70 8.5 7.1 2450 250 613 63
1/7.5 2/15 200 240 63 52 6.4 5.3 2250 230 567 58
1/5 1/5 300 360 41 34 4.2 3.5 1960 200 500 51
＊1/120 1/120 12.5 15 1264 1156 129 118 7500 765 1863 190
P.D27
55 1/100 1/100 15 18 1156 964 118 98.4 6420 655 1618 165
P.D32
1/80 1/80 18.8 22.5 926 771 94.5 78.7 6420 655 1618 165
1/60 1/60 25 30 731 609 74.6 62.1 5240 535 1275 130
P.D26
50 1/50 1/50 30 36 609 508 62.1 51.8 5240 535 1275 130
P.D32
1/40 1/40 37.5 45 487 406 49.7 41.4 5240 535 1275 130
200 50 8.8 1450 366 305 4750
3-Phase 1/30 1/30 50 60 37.3 31.1 485 1067 109
200 60 8.4 1740
2.2kW 1/25 1/25 60 72 305 254 31.1 25.9 4750 485 1067 109
220 60 7.9 1750
1/20 1/20 75 90 244 203 24.9 20.7 4750 485 1067 109
1/15 1/15 100 120 182 152 18.6 15.5 4410 450 1067 109 P.D25
45
1/12.5 19/235 120 144 152 126 15.5 12.9 4120 420 1040 106 P.D31
1/10 1/10 150 180 122 102 12.4 10.4 3920 400 967 99
1/7.5 2/15 200 240 91 76 9.3 7.8 3530 360 900 92
1/5 1/5 300 360 61 51 6.2 5.2 3140 320 800 82

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D15
Lineup
Standard Model
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake 3-Phase Performance Table

0.75kWー2.2kW IE1 (Standard Efficiency)

Output Shaft Output Shaft Output Shaft Output Shaft Outer Dimension
Allowable
Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual Thrust Load
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ Indoor Type
N Kgf N Kgf
Water-resistant Type
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
＊1/240 1/240 6.3 7.5 554 554 56.5 56.5 5190 530 1275 130
＊1/200 1/200 7.5 9 554 554 56.5 56.5 5190 530 1275 130
＊1/160 1/160 9.4 11.3 554 526 56.5 53.7 5190 530 1275 130 P.D25
45
1/120 1/120 12.5 15 473 395 48.3 40.3 4750 485 1177 120 P.D31
1/100 19/1880 15 18 395 328 40.3 33.5 4750 485 1177 120
1/80 1/80 18.8 22.5 316 263 32.2 26.8 4750 485 1177 120
1/60 1/60 25 30 249 208 25.4 21.2 3480 355 870 89
1/50 1/50 30 36 208 173 21.2 17.7 3480 355 870 89
1/40 1/40 37.5 45 166 138 16.9 14.1 3480 355 870 89
1/30 1/30 50 60 124 104 12.7 10.6 3280 335 821 84
1/25 1/25 60 72 104 86 10.6 8.8 3190 325 796 81
P.D24
200 50 3.2 1440 35 1/20 1/20 75 90 83 70 8.5 7.1 2990 305 747 76
3-Phase P.D30
200 60 3.0 1720 1/15 1/15 100 120 63 52 6.4 5.3 2740 280 686 70
0.75kW
220 60 2.9 1740 1/12.5 19/235 120 144 52 43 5.3 4.4 2600 265 669 68
1/10 1/10 150 180 41 34 4.2 3.5 2450 250 613 63
1/7.5 2/15 200 240 31 25 3.2 2.6 2250 230 567 58
1/5 1/5 300 360 21 18 2.1 1.8 1960 200 500 51
1/30 1/30 50 60 124 104 12.7 10.6 2650 270 662 68
1/25 1/25 60 72 104 86 10.6 8.8 2550 260 637 65
1/20 1/20 75 90 83 70 8.5 7.1 2400 245 600 61
30 1/15 1/15 100 120 63 52 6.4 5.3 2160 220 539 55 P.D23
（Small Frame No.）
1/12.5 19/235 120 144 52 43 5.3 4.4 2060 210 506 52 P.D29
1/10 1/10 150 180 41 34 4.2 3.5 1910 195 475 48
1/7.5 2/15 200 240 31 25 3.2 2.6 1760 180 438 45
1/5 1/5 300 360 21 18 2.1 1.8 1520 155 375 38
＊1/240 1/240 6.3 7.5 1264 1264 129 129 9800 1000 2452 250
＊1/200 1/200 7.5 9 1264 1264 129 129 9020 920 2256 230
1/160 1/160 9.4 11.3 1264 1049 129 107 8330 850 2059 210 P.D27
55
1/120 1/120 12.5 15 947 789 96.6 80.5 7500 765 1863 190 P.D32
1/100 1/100 15 18 789 658 80.5 67.1 6420 655 1618 165
1/80 1/80 18.8 22.5 631 526 64.4 53.7 6420 655 1618 165
1/60 1/60 25 30 498 416 50.8 42.4 4750 485 1067 109
1/50 1/50 30 36 416 345 42.4 35.2 4750 485 1067 109
1/40 1/40 37.5 45 332 276 33.9 28.2 4750 485 1067 109
1/30 1/30 50 60 249 208 25.4 21.2 4750 485 1067 109
1/25 1/25 60 72 208 173 21.2 17.7 4700 480 1067 109
P.D25
200 50 6.4 1450 45 1/20 1/20 75 90 166 138 16.9 14.1 4460 455 1067 109
3-Phase P.D31
200 60 6.0 1740 1/15 1/15 100 120 124 104 12.7 10.6 4070 415 1067 109
1.5kW
220 60 5.7 1750 1/12.5 19/235 120 144 104 86 10.6 8.8 3920 400 1040 106
1/10 1/10 150 180 83 70 8.5 7.1 3630 370 967 99
1/7.5 2/15 200 240 63 52 6.4 5.3 3330 340 900 92
1/5 1/5 300 360 41 34 4.2 3.5 2940 300 800 82
1/30 1/30 50 60 249 208 25.4 21.2 3280 335 821 84
1/25 1/25 60 72 208 173 21.2 17.7 3190 325 796 81
1/20 1/20 75 90 166 138 16.9 14.1 2990 305 747 76
35 1/15 1/15 100 120 124 104 12.7 10.6 2740 280 686 70 P.D24
（Small Frame No.）
1/12.5 19/235 120 144 104 86 10.6 8.8 2600 265 669 68 P.D30
1/10 1/10 150 180 83 70 8.5 7.1 2450 250 613 63
1/7.5 2/15 200 240 63 52 6.4 5.3 2250 230 567 58
1/5 1/5 300 360 41 34 4.2 3.5 1960 200 500 51
＊1/120 1/120 12.5 15 1264 1156 129 118 7500 765 1863 190
P.D27
55 1/100 1/100 15 18 1156 964 118 98.4 6420 655 1618 165
P.D32
1/80 1/80 18.8 22.5 926 771 94.5 78.7 6420 655 1618 165
1/60 1/60 25 30 731 609 74.6 62.1 5240 535 1275 130
P.D26
50 1/50 1/50 30 36 609 508 62.1 51.8 5240 535 1275 130
P.D32
1/40 1/40 37.5 45 487 406 49.7 41.4 5240 535 1275 130
200 50 8.8 1450 366 305 4750
3-Phase 1/30 1/30 50 60 37.3 31.1 485 1067 109
200 60 8.4 1740
2.2kW 1/25 1/25 60 72 305 254 31.1 25.9 4750 485 1067 109
220 60 7.9 1750
1/20 1/20 75 90 244 203 24.9 20.7 4750 485 1067 109
1/15 1/15 100 120 182 152 18.6 15.5 4410 450 1067 109 P.D25
45
1/12.5 19/235 120 144 152 126 15.5 12.9 4120 420 1040 106 P.D31
1/10 1/10 150 180 122 102 12.4 10.4 3920 400 967 99
1/7.5 2/15 200 240 91 76 9.3 7.8 3530 360 900 92
1/5 1/5 300 360 61 51 6.2 5.2 3140 320 800 82

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D16
Standard Model

D17
Lineup
Lineup
Standard Model
Concentric Solid Shaft F3 Series (F3F Type)

Gearmotor / Gearmotor with Brake 3-Phase Performance Table

0.1kWー0.4kW

Output Shaft Output Shaft Output Shaft Outer Dimension

Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Frame Actual
Frequency Rotation Reduction
Motor Supply Current Number Reduction
Speed Ratio
Specification Ratio r/min N・m Kgf・ｍ
N Kgf Indoor Type

V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz

＊1/240 1/240 6.3 7.5 101 98 10.3 10 2550 260
1/200 1/200 7.5 9 98 81 10 8.3 2550 260
1/160 1/160 9.4 11.3 78 66 8 6.7 2550 260
22 P.D35
1/120 1/120 12.5 15 59 49 6 5 2550 260
1/100 19/1880 15 18 49 41 5 4.2 2550 260
1/80 1/80 18.8 22.5 39 32 4 3.3 2550 260
1/60 1/59 25 30 31 25 3.2 2.6 1860 190
200 50 0.61 1420 1/50 1/50 30 36 25 22 2.6 2.2 1860 190
3-Phase
200 60 0.54 1700 1/40 1/40 37.5 45 21 18 2.1 1.8 1720 175
0.1kW
220 60 0.54 1720 1/30 2/59 50 60 16 13 1.6 1.3 1570 160
1/25 1/25 60 72 13 11 1.3 1.1 1470 150
18 1/20 1/20 75 90 11 8.6 1.1 0.88 1370 140 P.D34
1/15 1/15 100 120 7.7 6.5 0.79 0.66 1230 125
1/12.5 2/25 120 144 6.5 5.4 0.66 0.55 1180 120
1/10 1/10 150 180 5.2 4.3 0.53 0.44 1180 110
1/7.5 2/15 200 240 3.8 3.2 0.39 0.33 980 100
1/5 1/5 300 360 2.5 2.2 0.26 0.22 880 90
＊1/240 1/240 6.3 7.5 184 184 18.8 18.8 3140 320
＊1/200 1/200 7.5 9 184 175 18.8 17.9 3140 320
1/160 1/160 9.4 11.3 169 140 17.2 14.3 3140 320
28 P.D36
1/120 1/120 12.5 15 126 105 12.9 10.7 3140 320
1/100 19/1880 15 18 105 87 10.7 8.9 3140 320
1/80 1/80 18.8 22.5 84 71 8.6 7.2 3090 315
1/60 1/60 25 30 67 55 6.8 5.6 2550 260
1/50 1/50 30 36 55 46 5.6 4.7 2550 260
1/40 1/40 37.5 45 44 37 4.5 3.8 2400 245
1/30 1/30 50 60 33 27 3.4 2.8 2160 220
1/25 1/25 60 72 27 24 2.8 2.4 2060 210
200 50 1.1 1420 22 1/20 1/20 75 90 23 19 2.3 1.9 1910 195 P.D35
3-Phase
200 60 1.0 1700 1/15 1/15 100 120 17 14 1.7 1.4 1720 175
0.2kW
220 60 1.0 1720 1/12.5 19/235 120 144 14 12 1.4 1.2 1620 165
1/10 1/10 150 180 11 9.2 1.1 0.94 1520 155
1/7.5 2/15 200 240 8.3 7 0.85 0.71 1420 145
1/5 1/5 300 360 5.5 4.6 0.56 0.47 1270 130
1/30 2/59 50 60 33 27 3.4 2.8 1570 160
1/25 1/25 60 72 27 24 2.8 2.4 1470 150
1/20 1/20 75 90 23 19 2.3 1.9 1370 140
18 1/15 1/15 100 120 17 14 1.7 1.4 1230 125
（Small Frame No.）
P.D34
1/12.5 2/25 120 144 14 12 1.4 1.2 1180 120
1/10 1/10 150 180 11 9.2 1.1 0.94 1080 110
1/7.5 2/15 200 240 8.3 7 0.85 0.71 980 100
1/5 1/5 300 360 5.5 4.6 0.56 0.47 880 90
＊1/240 1/240 6.3 7.5 270 270 27.6 27.6 3630 370
＊1/200 1/200 7.5 9 270 270 27.6 27.6 3630 370
＊1/160 1/160 9.4 11.3 270 270 27.6 27.6 3580 365
32 P.D37
1/120 1/120 12.5 15 253 211 25.8 21.5 3380 345
1/100 19/1880 15 18 211 175 21.5 17.9 3380 345
1/80 1/80 18.8 22.5 169 140 17.2 14.3 3330 340
1/60 1/60 25 30 133 111 13.6 11.3 3090 315
1/50 1/50 30 36 111 92 11.3 9.4 2990 305
1/40 1/40 37.5 45 88 74 9 7.5 2790 285
1/30 1/30 50 60 67 55 6.8 5.6 2600 265
1/25 1/25 60 72 55 46 5.6 4.7 2450 250
200 50 2.1 1410 28 1/20 1/20 75 90 44 37 4.5 3.8 2300 235 P.D36
3-Phase
200 60 1.8 1690 1/15 1/15 100 120 33 27 3.4 2.8 2060 210
0.4kW
220 60 1.8 1710 1/12.5 19/235 120 144 27 24 2.8 2.4 1960 200
1/10 1/10 150 180 23 19 2.3 1.9 1810 185
1/7.5 2/15 200 240 17 14 1.7 1.4 1670 170
1/5 1/5 300 360 11 9.2 1.1 0.94 1470 150
1/30 1/30 50 60 67 55 6.8 5.6 2160 220
1/25 1/25 60 72 55 46 5.6 4.7 2060 210
1/20 1/20 75 90 44 37 4.5 3.8 1910 195
22 1/15 1/15 100 120 33 27 3.4 2.8 1720 175
（Small Frame No.） P.D35
1/12.5 19/235 120 144 27 24 2.8 2.4 1620 165
1/10 1/10 150 180 23 19 2.3 1.9 1520 155
1/7.5 2/15 200 240 17 14 1.7 1.4 1420 145
1/5 1/5 300 360 11 9.2 1.1 0.94 1270 130

Note 1) The allowable O.H.L. are the values in the central position of the output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D18
 Lineup
Standard Model
0.75kW−2.2kW IE3 (Premium Efficiency)

Output Shaft Output Shaft Output Shaft Outer Dimension

Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ
N Kgf Indoor Type

V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz

＊1/240 1/240 6.3 7.5 554 554 56.5 56.5 5190 530
＊1/200 1/200 7.5 9 554 554 56.5 56.5 5190 530
＊1/160 1/160 9.4 11.3 554 526 56.5 53.7 4850 495
40 P.D38
1/120 1/120 12.5 15 473 395 48.3 40.3 4460 455
1/100 19/1880 15 18 395 328 40.3 33.5 4460 455
1/80 1/80 18.8 22.5 316 263 32.2 26.8 4460 455
1/60 1/60 25 30 249 208 25.4 21.2 3330 340
1/50 1/50 30 36 208 173 21.2 17.7 3330 340
1/40 1/40 37.5 45 166 138 16.9 14.1 3280 335
1/30 1/30 50 60 124 104 12.7 10.6 3040 310
1/25 1/25 60 72 104 86 10.6 8.8 2890 295
200 50 3.2 1440 32 1/20 1/20 75 90 83 70 8.5 7.1 2700 275 P.D37
3-Phase
200 60 3.0 1720 1/15 1/15 100 120 63 52 6.4 5.3 2500 255
0.75kW
220 60 2.9 1740 1/12.5 19/235 120 144 52 43 5.3 4.4 2350 240
1/10 1/10 150 180 41 34 4.2 3.5 2210 225
1/7.5 2/15 200 240 31 25 3.2 2.6 2010 205
1/5 1/5 300 360 21 18 2.1 1.8 1760 180
1/30 1/30 50 60 124 104 12.7 10.6 2600 265
1/25 1/25 60 72 104 86 10.6 8.8 2450 250
1/20 1/20 75 90 83 70 8.5 7.1 2300 235
28 1/15 1/15 100 120 63 52 6.4 5.3 2060 210
（Small Frame No.） P.D36
1/12.5 19/235 120 144 52 43 5.3 4.4 1960 200
1/10 1/10 150 180 41 34 4.2 3.5 1810 185
1/7.5 2/15 200 240 31 25 3.2 2.6 1670 170
1/5 1/5 300 360 21 18 2.1 1.8 1470 150
1/60 1/60 25 30 498 416 50.8 42.4 4460 455
1/50 1/50 30 36 416 346 42.4 35.3 4460 455
1/40 1/40 37.5 45 332 276 33.9 28.2 4460 455
1/30 1/30 50 60 249 208 25.4 21.2 4310 440
1/25 1/25 60 72 208 173 21.2 17.7 4170 425
40 1/20 1/20 75 90 166 138 16.9 14.1 3870 395 P.D38
1/15 1/15 100 120 124 104 12.7 10.6 3530 360
1/12.5 19/235 120 144 104 86 10.6 8.8 3380 345
200 50 6.4 1450 1/10 1/10 150 180 83 70 8.5 7.1 3140 320
3-Phase
200 60 6.0 1740 1/7.5 2/15 200 240 63 52 6.4 5.3 2840 290
1.5kW
220 60 5.7 1750 1/5 1/5 300 360 41 34 4.2 3.5 2500 255
1/30 1/30 50 60 249 208 25.4 21.2 3040 310
1/25 1/25 60 72 208 173 21.2 17.7 2890 295
1/20 1/20 75 90 166 138 16.9 14.1 2700 275
32 1/15 1/15 100 120 124 104 12.7 10.6 2500 255
（Small Frame No.） P.D37
1/12.5 19/235 120 144 104 86 10.6 8.8 2350 240
1/10 1/10 150 180 83 70 8.5 7.1 2210 225
1/7.5 2/15 200 240 63 52 6.4 5.3 2010 205
1/5 1/5 300 360 41 34 4.2 3.5 1760 180
1/30 1/30 50 60 366 305 37.3 31.1 4410 450
1/25 1/25 60 72 305 254 31.1 25.9 4410 450
1/20 1/20 75 90 244 203 24.9 20.7 4410 450
200 50 8.8 1450 182 152 18.6
3-Phase 1/15 1/15 100 120 15.5 4120 420
200 60 8.4 1740 40 P.D38
2.2kW 1/12.5 19/235 120 144 152 126 15.5 12.9 3820 390
220 60 7.9 1750
1/10 1/10 150 180 122 102 12.4 10.4 3530 360
1/7.5 2/15 200 240 91 76 9.3 7.8 3230 330
1/5 1/5 300 360 61 51 6.2 5.2 2940 300

Note 1) The allowable O.H.L. are the values in the central position of the output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D19
Lineup
Standard Model
Concentric Solid Shaft F3 Series (F3F Type)

Gearmotor / Gearmotor with Brake 3-Phase Performance Table

0.75kW IE1 (Standard Efficiency)

Output Shaft Output Shaft Output Shaft Outer Dimension

Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ
N Kgf Indoor Type

V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz

＊1/240 1/240 6.3 7.5 554 554 56.5 56.5 5190 530
＊1/200 1/200 7.5 9 554 554 56.5 56.5 5190 530
＊1/160 1/160 9.4 11.3 554 526 56.5 53.7 4850 495
40 P.D38
1/120 1/120 12.5 15 473 395 48.3 40.3 4460 455
1/100 19/1880 15 18 395 328 40.3 33.5 4460 455
1/80 1/80 18.8 22.5 316 263 32.2 26.8 4460 455
1/60 1/60 25 30 249 208 25.4 21.2 3330 340
1/50 1/50 30 36 208 173 21.2 17.7 3330 340
1/40 1/40 37.5 45 166 138 16.9 14.1 3280 335
1/30 1/30 50 60 124 104 12.7 10.6 3040 310
1/25 1/25 60 72 104 86 10.6 8.8 2890 295
200 50 3.2 1440 32 1/20 1/20 75 90 83 70 8.5 7.1 2700 275 P.D37
3-Phase
200 60 3.0 1720 1/15 1/15 100 120 63 52 6.4 5.3 2500 255
0.75kW
220 60 2.9 1740 1/12.5 19/235 120 144 52 43 5.3 4.4 2350 240
1/10 1/10 150 180 41 34 4.2 3.5 2210 225
1/7.5 2/15 200 240 31 25 3.2 2.6 2010 205
1/5 1/5 300 360 21 18 2.1 1.8 1760 180
1/30 1/30 50 60 124 104 12.7 10.6 2600 265
1/25 1/25 60 72 104 86 10.6 8.8 2450 250
1/20 1/20 75 90 83 70 8.5 7.1 2300 235
28 1/15 1/15 100 120 63 52 6.4 5.3 2060 210
（Small Frame No.） P.D36
1/12.5 19/235 120 144 52 43 5.3 4.4 1960 200
1/10 1/10 150 180 41 34 4.2 3.5 1810 185
1/7.5 2/15 200 240 31 25 3.2 2.6 1670 170
1/5 1/5 300 360 21 18 2.1 1.8 1470 150
1/60 1/60 25 30 498 416 50.8 42.4 4460 455
1/50 1/50 30 36 416 346 42.4 35.3 4460 455
1/40 1/40 37.5 45 332 276 33.9 28.2 4460 455
1/30 1/30 50 60 249 208 25.4 21.2 4310 440
1/25 1/25 60 72 208 173 21.2 17.7 4170 425
40 1/20 1/20 75 90 166 138 16.9 14.1 3870 395 P.D38
1/15 1/15 100 120 124 104 12.7 10.6 3530 360
1/12.5 19/235 120 144 104 86 10.6 8.8 3380 345
200 50 6.4 1450 1/10 1/10 150 180 83 70 8.5 7.1 3140 320
3-Phase
200 60 6.0 1740 1/7.5 2/15 200 240 63 52 6.4 5.3 2840 290
1.5kW
220 60 5.7 1750 1/5 1/5 300 360 41 34 4.2 3.5 2500 255
1/30 1/30 50 60 249 208 25.4 21.2 3040 310
1/25 1/25 60 72 208 173 21.2 17.7 2890 295
1/20 1/20 75 90 166 138 16.9 14.1 2700 275
32 1/15 1/15 100 120 124 104 12.7 10.6 2500 255
（Small Frame No.） P.D37
1/12.5 19/235 120 144 104 86 10.6 8.8 2350 240
1/10 1/10 150 180 83 70 8.5 7.1 2210 225
1/7.5 2/15 200 240 63 52 6.4 5.3 2010 205
1/5 1/5 300 360 41 34 4.2 3.5 1760 180
1/30 1/30 50 60 366 305 37.3 31.1 4410 450
1/25 1/25 60 72 305 254 31.1 25.9 4410 450
1/20 1/20 75 90 244 203 24.9 20.7 4410 450
200 50 8.8 1450 182 152 18.6
3-Phase 1/15 1/15 100 120 15.5 4120 420
200 60 8.4 1740 40 P.D38
2.2kW 1/12.5 19/235 120 144 152 126 15.5 12.9 3820 390
220 60 7.9 1750
1/10 1/10 150 180 122 102 12.4 10.4 3530 360
1/7.5 2/15 200 240 91 76 9.3 7.8 3230 330
1/5 1/5 300 360 61 51 6.2 5.2 2940 300

Note 1) The allowable O.H.L. are the values in the central position of the output shaft.
2) Please be sure to read the remarks stated on〈page D13〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D20
Standard Model

D21
Lineup
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake

Frame No. 20
Fig.1 64 64 （A）
When the protective When the protective A
cap is attached. cap is attached.
92 127
7 7
96 78 48.5 78.5 （200 ）
24 24 Flange surface Flange surface
48 39 39 38.5 68.5
13 13 Protective cap 6
F3S-20
φ20H8 φ20H8 (attachment)
48.5
φ53h7 φ53h7 38.5
φ29 φ29 97 22.8 （φ135）
4-φ10.5 4-φ8.6 38.5
48.5

2 2
4-M10×P1.5 4-M10×P1.5 117

37 37 28
□70

Fig.2 Small Frame No. Type

（57.5） 47.5
（125.5） （87.5）
（
A A）
When the protective When the protective
cap is attached. cap is attached.

Flange surface Flange surface

39 39
Protective cap
F3S-20
(attachment)

135

Flange surface

64.5（61）
The values within parentheses are of those with brake motors. 132（128.5） 78.5（95.5）

Indoor Specification Without Brake

Capacity
Type Fig. Number A Weight
3-Phase 0.1kW F3SM-20-5∼60-T010(W)A 1 256.5 6.5kg
3-Phase 0.2kW F3SM-20-5∼30-T020(W)A 2 302.5 7.5kg
Note）0.1kW does not have a fan cover.
Indoor Specification With Brake
Capacity
Type Fig. Number （A） Weight
3-Phase 0.1kW F3SB-20-5∼60-T010(W,P)A 1 296.5 8kg
3-Phase 0.2kW F3SB-20-5∼30-T020(W,P)A 2 319.5 9kg

Frame No. 25
Fig.1 When the protective
cap is attached.
When the protective
cap is attached. （
A A）

Flange surface Flange surface

Protective cap
F3S-25
(attachment)

D
Fig.2 Small Frame No. Type
B
E

（
A A）
When the protective When the protective
cap is attached. cap is attached.
Flange surface Flange surface
Protective cap
F3S-25
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.1kW F3SM-25-80∼240-T010(W)A 1 287.5 ─ ─ ─ ─ 8kg
3-Phase 0.2kW F3SM-25-5∼60-T020(W)A 1 315 78.5 135 64.5 132 8.5kg
3-Phase 0.4kW F3SM-25-5-30-T040(W)A 2 347.5 ─ ─ ─ ─ 10.5kg
Note）0.1kW does not have a fan cover.
Indoor Specification With Brake
Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.1kW F3SB-25-80∼240-T010(W,P)A 1 327.5 87.5 135 57.5 126.5 9.5kg
3-Phase 0.2kW F3SB-25-5∼60-T020(W,P)A 1 332 95.5 135 61 128.5 10kg
D22 3-Phase 0.4kW F3SB-25-5-30-T040(W,P)A 2 367 ─ ─ ─ ─ 12kg
 Diagrams
Outer Dimension
Frame No. 30
Fig.1 （
A A）
When the protective When the protective
cap is attached. cap is attached.
Flange surface Flange surface

Protective cap
F3S-30
(attachment)

Fig.2 When the protective When the protective

cap is attached. cap is attached.
（
A A）
Flange surface Flange surface

Protective cap
F3S-30
(attachment)

141

69.5
140 84.5

Fig.3 Small Frame No. Type （82） （82）

When the protective When the protective
cap is attached. cap is attached.

120 （
A A）
7 7
124 106 159 31 227.5（237.5）
33 58 33 Flange surface Flange surface 58 101
53 53
17 17 48 91
Protective cap 8
F3S-30
φ30H8 φ30H8 (attachment)
58 48

φ75h7 φ44 φ44 φ75h7 116 33.3 □156

4-φ10.5 4-φ8.6
58 48

135
2 2 Flange surface

4-M10 P1.5 4-M10 P1.5

80
25 96 88
15.5
40.5 40.5

Fig.4 Small Frame No. Type

When the protective When the protective
cap is attached. cap is attached.
（
A A）
Flange surface Flange surface

Protective cap
F3S-30
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A Weight
3-Phase 0.2kW F3SM-30-80∼240-T020(W)A 1 354.5 10kg
3-Phase 0.4kW F3SM-30-5∼60-T040(W)A 2 360 11.5kg
3-Phase 0.75kW【IE3】 F3S30N5∼30-MP08TN(W)NTN 3 417.5 18.5kg
3-Phase 0.75kW【IE1】 F3SM-30-5∼30-075(W) 4 389.5 15kg
Indoor Specification With Brake
Capacity
Type Fig. Number A Weight
3-Phase 0.2kW F3SB-30-80∼240-T020(W,P)A 1 371.5 11.5kg
3-Phase 0.4kW F3SB-30-5∼60-T040(W,P)A 2 379.5 13g
3-Phase 0.75kW【IE3】 F3S30N5∼30-MP08TN(W)NTB2(B4) 3 427.5 20.5kg
3-Phase 0.75kW【IE1】 F3SB-30-5∼30-075(W,P) 4 396.5 17kg D23
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake

Frame No. 35
Fig.1 When the protective When the protective
Flange surface cap is attached. cap is attached. Flange surface

Protective cap
F3S-35
(attachment)

（95） （95）

Fig.2
When the protective When the protective 434.5（444.5）
cap is attached. cap is attached.
138 22
7 7 185 227.5（237.5）
142 124 68 117
38 66 38 Flange surface Flange surface
56 105
62 62
20 20 Protective cap 10
F3S-35
φ35H8 φ35H8
(attachment)
68
56

φ85h7 φ49 φ49 φ85h7 136 38.3 □156

4-φ12.5 4-φ10.6 68 56

135
2 2 Flange surface

4-M12 P1.75 4-M12 P1.75

80
96 88
18 30
48 48

（95） （95）

Fig.3 38
142
66 38
When the protective When the protective
cap is attached. cap is attached.
138 185
37.5
499（524）
276.5（301.5）
7 7
20 20 Flange surface 124 68 117
62 62 56 105
Protective cap Flange surface
F3S-35 10
φ35H8 φ35H8 (attachment)
68 56
φ85h7 φ49 φ49 φ85h7 136 38.3 □178
4-φ12.5 98.5
4-φ10.6 68 56 119.5

142
2 2 Flange surface
φ20
4-M12 P1.75 4-M12 P1.75

80
30
18 125 88

Fig.4
48 48

When the protective When the protective

cap is attached. cap is attached.

Flange surface Flange surface

Protective cap
F3S-35
(attachment)

Fig.5 When the protective When the protective

cap is attached. cap is attached.
Flange surface Flange surface
Protective cap
F3S-35
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification
Without Brake With Brake Indoor Specification
Capacity Capacity
TypeFig. Number Weight Fig. Number Type Weight
3-Phase 0.4kW F3SM-35-80∼240-T040(W)A 1 15kg 3-Phase 0.4kW F3SB-35-80∼240-T040(W,P)A 1 17kg
3-Phase 0.75kW【IE3】 F3S35N5∼60-MP08TN(W)NTN 2 21kg 3-Phase 0.75kW【IE3】 F3S35N5∼60-MP08TN(W)NTB2(B4) 2 23kg
3-Phase 1.5kW【IE3】 F3S35N5∼30-MP15TN(W)NTN 3 28kg 3-Phase 1.5kW【IE3 F3S35N5∼30-MP15TN(W)NTB2(B4) 3 31kg
3-Phase 0.75kW【IE1】 F3SM-35-5∼60-075(W) 4 17.5kg 3-Phase 0.75kW【IE1】 F3SB-35-5∼60-075(W,P) 4 19.5kg
3-Phase 1.5kW【IE1】 F3SM-35-5∼30-150(W) 5 24.5kg 3-Phase 1.5kW【IE1】 F3SB-35-5∼30-150(W,P) 5 27.5kg
D24
 Diagrams
Outer Dimension
Frame No. 45
Fig.1 （108） （108）
When the protective When the protective （
A A）
cap is attached. cap is attached.
19.5
164 272 227.5（237.5）
168 7 7
150 87 185
50 68 50 Flange surface Flange surface 69 167
26 26 75 75
Protective cap 14
F3S-45
φ45H8 φ45H8
(attachment) 87
69
φ100h7 φ64 φ64 φ100h7 174 48.8 □156

4-φ20.5 69 103
4-φ17.5 87
119.5 135

2 Flange surface
2

4-M20 P2.5 80 4-M20 P2.5

96 88
23 50
73 73

Fig.2
（108） （108）
When the protective When the protective A（A）
cap is attached. cap is attached.
33
168 164 235 B
7 7
50 68 50 150 87 148
Flange surface 75 75 Flange surface 73 134
26 26
Protective cap
14
F3S-45
φ45H8 φ45H8
(attachment)
87 73

φ100h7 φ64 φ64 φ100h7 174 48.8 □E

4-φ16.5 4-φ14 87 73 98.5

115
D

2 2 Flange surface φ20

4-M16 P2.0 80 4-M16 P2.0

23 40 C 88
63 63

Fig.3
（
A A）
When the protective When the protective
cap is attached. cap is attached.

Flange surface Flange surface

Protective cap
F3S-45

(attachment)

Fig.4
A(A)
When the protective When the protective
cap is attached. cap is attached.

Flange surface Flange surface

Protective cap
F3S-45

(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.75kW【IE3】 F3S45N80∼240-MP08TN(W)NTN 1 519 ─ ─ ─ 28.5kg
3-Phase 1.5kW【IE3】 F3S45N5∼60-MP15TN(W)NTN 2 544.5 276.5 178 178 35.5kg
3-Phase 2.2kW【IE3】 F3S45N5∼30-MP22TN(W)NTN 2 578 310 192 192 42kg
3-Phase 0.75kW【IE1】 F3SM-45-80∼240-075(W) 3 491 ─ ─ ─ 25kg
3-Phase 1.5kW【IE1】 F3SM-45-5∼60-150(W) 4 507 110.5 ─ ─ 32kg
3-Phase 2.2kW【IE1】 F3SM-45-5∼30-220(W) 4 532 111.5 ─ ─ 35kg

Indoor Specification With Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.75kW【IE3】 F3S45N80∼240-MP08TN(W)NTB2(B4) 1 529 ─ ─ ─ ─ 30.5kg
3-Phase 1.5kW【IE3】 F3S45N5∼60-MP15TN(W)NTB2(B4) 2 569.5 301.5 125 142 178 38.5kg
3-Phase 2.2kW【IE3】 F3S45N5∼30-MP22TN(W)NTB2(B4) 2 603 335 158 153 192 45kg
3-Phase 0.75kW【IE1】 F3SB-45-80∼240-075(W,P) 3 498 ─ ─ ─ ─ 27kg
3-Phase 1.5kW【IE1】 F3SB-45-5∼60-150(W,P) 4 528.5 132 ─ ─ ─ 35kg
3-Phase 2.2kW【IE1】 F3SB-45-5∼30-220(W,P) 4 553.5 132 ─ ─ ─ 38kg

D25
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake

Frame No. 50
Fig.1
（120） （120） 657（682）
When the protective When the protective 43
172 cap is attached. cap is attached. 304 310（335）
55 62 55 7 168 7 118 186 21
Flange surface Flange surface
154 102 170
29 29 Protective cap 77 77 14
F3S-5055

φ50H8 φ50H8 (attachment)

106 90

φ110h7 φ74 φ74 φ110h7 212 53.8 □192

4-φ16.5 4-φ16.5 106 90 121

4-φ14
137.3 153

φ20
2 2 Flange surface
3-M4
80
158 88
4-M16 P2.0 40 40 4-M16 P2.0
19 19
59 59

Fig.2 120 120 （632.5）

611
When the protective When the protective
cap is attached. cap is attached. 304
（250 ）
172 Flange surface 168 Flange surface 118 186
55 55 7 7
62 154 102 170
29 29 Protective cap
F3S-5055 77 77 14
(attachment)
φ50H8 φ50H8 106
90
φ110h7 φ74 φ74 φ110h7 212 53.8 φ186
90 121
4-φ16.5 4-φ14 137.3
106
133
2 2 φ20
4-M16×P2.0 82 4-M16×P2.0 3-M4 89
59 59 （132）
111.5
86
179.5

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity
Type Fig. Number Weight Type Fig. Number Weight
3-Phase 2.2kW【IE3】 F3S50N40∼60-MP22TN(W)NTN 1 51kg F3S50N40∼60-MP22TN(W)NTB2(B4) 1 54kg
3-Phase 2.2kW【IE1】 F3SM-50-40∼60-220(W) 2 44kg F3SB-50-40∼60-220(W,P) 2 47kg

D26
 Diagrams
Outer Dimension
Frame No. 55
Fig.1
（143） （143）
When the protective When the protective
cap is attached. cap is attached.
220 A（A）
216 22.5
8 8 336 276.5（301.5）
61 98 61 Flange surface 200
100 100 Flange surface
116 220
32 32 94 198
Protective cap 16
F3S-5055
(attachment)
φ55H8 φ55H8
130
108

φ120h7 φ79 φ79 φ120h7 260 59.3 □178

4-φ20.5 4-φ17.5 4-φ20.5 108

130 142
169.5149

2 2 Flange surface
4-M20×P2.5 4-M20×P2.5 φ25
3-M4 125 88
21.5 50 50 21.5
71.5 71.5

Fig.2
143 143 A(A)
When the protective When the protective
cap is attached. cap is attached.

220 Flange surface 216 Flange surface

61 61 8 8
98 200
32 32 Protective cap
F3S-5055
100 100

(attachment)
φ55H8 φ55H8

φ120h7 φ120h7
φ79 φ79

4-φ20.5 4-φ17.5

2 2
4-M20×P2.5 71.5 71.5 4-M20×P2.5 B

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 1.5kW【IE3】 F3S55N80∼240-MP15TN(W)NTN 1 635 276.5 125 142 178 89.5kg
3-Phase 2.2kW【IE3】 F3S55N80∼120-MP22TN(W)NTN 1 668.5 310 158 153 192 98kg

3-Phase 1.5kW【IE1】 F3SM-55-80∼240-150(W) 2 597.5 110.5 ─ ─ ─ 86kg

3-Phase 2.2kW【IE1】 F3SM-55-80∼120-220(W) 2 622.5 111.5 ─ ─ ─ 91kg

Indoor Specification With Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 1.5kW【IE3】 F3S55N80∼240-MP15TN(W)NTB2(B4) 1 660 301.5 125 142 178 92.5kg
3-Phase 2.2kW【IE3】 F3S55N80∼120-MP22TN(W)NTB2(B4) 1 693.5 335 158 153 192 101kg

3-Phase 1.5kW【IE1】 F3SB-55-80∼240-150(W,P) 2 619 132 ─ ─ ─ 89kg

3-Phase 2.2kW【IE1】 F3SB-55-80∼120-220(W,P) 2 644 132 ─ ─ ─ 94kg

D27
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)
Leg Mount Type Water-resistant, Outdoor Gearmotor /
Water-resistant, Outdoor Gearmotor with Brake

Frame No. 20
Fig.1 64 64
When the protective When the protective
（308）
cap is attached. cap is attached. 256.5
92 127
7 7
96 78 48.5 78.5
24 24 Flange surface Flange surface
48 39 39 38.5 68.5
13 13 Protective cap
6
F3S-20
φ20H8 φ20H8 (attachment)
48.5
φ53h7 φ53h7 38.5
φ29 φ29 97 22.8
4-φ10.5 4-φ8.6 38.5
48.5

2 2 108.5
4-M10×P1.5 4-M10×P1.5

37 37 28
□80

Fig.2 Small Frame No. Type

When the protective When the protective
cap is attached. cap is attached.

Flange surface Flange surface

Protective cap
F3S-20
(attachment)

The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake Indoor/Water-resistant Specification With Brake

Capacity Capacity
Type Fig. Number Weight Type Fig. Number Weight
3-Phase 0.1kW F3SW(G)-20-5∼60-T010(W)E 1 6.5kg 3-Phase 0.1kW F3SV(H)-20-5∼60-T010(W,P)E 1 8kg
3-Phase 0.2kW F3SW(G)-20-5∼30-T020(W)E 2 7.5kg 3-Phase 0.2kW F3SV(H)-20-5∼30-T020(W,P)E 2 9kg
Note) 0.1kW does not have a fan cover.

Frame No. 25
Fig.1 When the protective
cap is attached.
When the protective
cap is attached.
（A）
A
B
Flange surface Flange surface C
Protective cap D
F3S-25
(attachment)

E
F

Fig.2 Small Frame No. Type 79 79 （A）

When the protective When the protective A
cap is attached. cap is attached.
118 114 140
27 64 27 Flange surface 7 7 Flange surface
100 53.5 86.5
14 14 50 50
Protective cap 43.5 76.5
F3S-25 8
φ25H8 φ25H8 (attachment)
53.5 43.5
φ66h7φ39 φ39 φ66h7 28.3 φ141
107
4-φ10.5 4-φ8.6
53.5 43.5

114.5
2 2
4-M10×P1.5 4-M10×P1.5

39.5 39.5
□80 28
69.5
140
The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake

Capacity
Type Fig. Number A B C D E F Weight
3-Phase 0.1kW F3SW(G)-25-80∼240-T010(W)E 1 287.5 159 105.5 95.5 ─ ─ 8kg
3-Phase 0.2kW F3SW(G)-25-5∼60-T020(W)E 1 314.5 140 86.5 76.5 61 128.4 8.5kg
3-Phase 0.4kW F3SW(G)-25-5-30-T040(W)E 2 346 ─ ─ ─ ─ ─ 10.5kg
Note) 0.1kW does not have a fan cover.
Indoor/Water-resistant Specification With Brake
Capacity
Type Fig. Number （A） B C D E F Weight
3-Phase 0.1kW F3SW(G)-25-80∼240-T010(W)E 1 339 159 105.5 95.5 ─ ─ 9.5kg
3-Phase 0.2kW F3SW(G)-25-5∼60-T020(W)E 1 364.5 140 86.5 76.5 61 128.5 10kg
3-Phase 0.4kW F3SW(G)-25-5-30-T040(W)E 2 404 ─ ─ ─ ─ ─ 12kg
D28
 Diagrams
Outer Dimension
Frame No. 30
Fig.1 82 82
When the protective
cap is attached.
When the protective
cap is attached. （A）
124 120 A
Flange surface 7 7 Flange surface B
33 58 33 106 58
53 C
17 17 Protective cap 53 E D
F3S-30 8
φ30H8 φ30H8 (attachment)
58
φ75h7 φ75h7 F
φ44 φ44 116 33.3 φI
J L G
58

2 2
K K H

M M 28
N □80
O

Fig.2 Small Frame No. Type （82） （82）

When the protective When the protective A（A）
cap is attached. cap is attached. 31
124 120 159 227.5（297.5）
7 7
33 58 33 106 58 101
Flange surface 53 53 Flange surface 48 91
17 17
Protective cap 8
φ30H8 φ30H8 F3S-30
(attachment)
58 48

φ75h7 φ44 φ44 φ75h7 116 33.3 □156

4-φ10.5 4-φ8.6 58 48

130.5
2 2 Flange surface
4-M10×P1.5 4-M10×P1.5

25
15.5 28
40.5 40.5 99 □80

Fig.3 Small Frame No. Type

82 82 （A）
When the protective
cap is attached.
When the protective
cap is attached.
A
124
33 33 120 159
58 Flange surface 7 7 Flange surface
17 17 106 58 101
53 53
Protective cap 48 91
F3S-30 8
φ30H8 φ30H8 (attachment)
58 48
φ75h7φ44 φ44 φ75h7 116 33.3 φ162
4-φ10.5 4-φ8.6
58 48
126.5
2 2
4-M10×P1.5 4-M10×P1.5

40.5 82 40.5
□80 28
78
159
The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake

Capacity
Type Fig.
Number A B C D E F G H I J K L M N O Weight
3-Phase 0.2kW F3SW(G)-30-80∼240-T020(W)E 1 354 180 122 110 46 46 46 108.5 135 4-φ12.5 4-M12×P1.75 4-φ10.6 45.5 61 128.5 10kg
3-Phase 0.4kW F3SW(G)-30-5∼60-T040(W)E 1 358.5 159 101 91 48 48 48 114.5 141 4-φ10.5 4-M10×P1.5 4-φ8.6 40.5 69.5 140 11.5kg
3-Phase 0.75kW【IE3】 F3S30N5∼30-WP08TN(W)NEN 2 417.5 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 18.5kg
3-Phase 0.75kW【IE1】 F3SW(G)-30-5∼30-075(W)E 3 388 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 15kg
Indoor/Water-resistant Specification With Brake
Capacity
Type Fig.
Number （A） B C D E F G H I J K L M N O Weight
3-Phase 0.2kW F3SV(H)-30-80∼240-T020(W,P)E 1 404 180 122 110 46 46 46 108.5 135 4-φ12.5 4-M12×P1.75 4-φ10.6 45.5 61 128.5 11.5kg
3-Phase 0.4kW F3SV(H)-30-5∼60-T040(W,P)E 1 416.5 159 101 91 48 48 48 114.5 141 4-φ10.5 4-M10×P1.5 4-φ8.6 40.5 69.5 140 13kg
3-Phase 0.75kW【IE3】 F3S305∼30-WP08TN(W)NEV2(V4) 2 487.5 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 20.5kg
3-Phase 0.75kW【IE1】 F3SV(H)-30-5∼30-075(W,P)E 3 457.5 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 17kg

D29
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)
Leg Mount Type Water-resistant, Outdoor Gearmotor /
Water-resistant, Outdoor Gearmotor with Brake

Frame No. 35
Fig.1 95 95 （475）
142 When the protective When the protective 417
Flange surface cap is attached. cap is attached. Flange surface 222
38 66 38 138
7 7 68 154
20 20 Protective cap 124 54 140
F3S-35 62 62 10
(attachment)
φ35H8 φ35H8
68
54
φ85h7 φ85h7
φ49 φ49 136 38.3 φ141
4-φ16.5 54
68

2 2 114.5
4-M16×P2 4-M16×P2
58 58 28
□80
69.5

Fig.2 142
（95）
When the protective
（95）
When the protective 434.5（504.5）
cap is attached. cap is attached.
185 22 227.5（297.5）
38 66 38 138
7 7 68 117
20 20 Flange surface 124 Flange surface 56 105
62 62 10
Protective cap
φ35H8 φ35H8 F3S-35
(attachment)
68 56

φ85h7φ49 φ49 φ85h7 136 38.3 □156

4-φ12.5 4-φ10.6 68 56

130.5

2 2 4-M12×P1.75 4-M12×P1.75 Flange surface

30 28
18
99 □80
48 48

Fig.3 Small Frame No. Type

（95） （95）
When the protective When the protective
142 cap is attached. cap is attached. 499
37.5
38 66 38 138 185 276.5
Flange surface 7 7
124 68 117
20 20
62 62 Flange surface 56 105
Protective cap
F3S-35 10

φ35H8 φ35H8 (attachment)

68 56

φ85h7φ49 φ49 φ85h7 136 38.3 □178

4-φ12.5 4-φ10.6 98.5
68 56 119.5
137.5

2 2 4-M12×P1.75 4-M12×P1.75
Flange surface φ20

30 28
18 128 □80
48 48

Fig.4 （474.5）
95 95 405
When the protective When the protective 185
cap is attached. cap is attached.
142 Flange surface
138 Flange surface 68 117
38 38 7 124 7
66 56 105
20 20 Protective cap
F3S-35 62 62 10
(attachment)
φ35H8 φ35H8
68
56
φ85h7 φ85h7
φ49 φ49 136 38.3 φ162
4-φ12.5 4-φ10.6 56
68

2 2 126.5
4-M12×P1.75 4-M12×P1.75

48 48 28
□80
78
159

Fig.5 Small Frame No. Type

95 95
When the protective When the protective
142 cap is attached. cap is attached. 461.5
38 66 38 138 185
Flange surface 7 7 Flange surface
20 20 124 68 117
62 62
Protective cap 56 105
F3S-35 10
φ35H8 φ35H8 (attachment)
68 56
φ186
φ85h7φ49 φ49 φ85h7 136 38.3
4-φ12.5 4-φ10.6 98.5
68 56 119.5
137.5
2 2
φ20
4-M12×P1.75 4-M12×P1.75

48 48 □80 28
86
179.5
The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake Indoor/Water-resistant Specification With Brake

Capacity Capacity
Type Fig.
Number Weight Type Fig.
Number Weight
3-Phase 0.4kW F3SW(G)-35-80∼240-T040(W)E 1 15kg 3-Phase 0.4kW F3SV(H)-35-80∼240-T040(W,P)E 1 17kg
3-Phase 0.75kW【IE3】 F3S35S(N)5∼60-WP08TN(W)NEN 2 21kg 3-Phase 0.75kW【IE3】 F3S35S(N)5∼60-WP08TN(W)NEV2(V4) 2 23kg
3-Phase 1.5kW【IE3】 F3S35S(N)5∼30-WP15TN(W)NEN 3 28kg 3-Phase0.75kW【IE1】 F3SV(H)-35-5∼60-075(W,P)E 4 19.5kg
3-Phase 0.75kW【IE1】 F3SW(G)-35-5∼60-075(W)E 4 17.5kg
D30 3-Phase 1.5kW【IE1】 F3SW(G)-35-5∼30-150(W)E 5 24.5kg
 Diagrams
Outer Dimension
Frame No. 45
Fig.1 （108） （108）
168 When the protective When the protective A（A）
cap is attached. cap is attached. 19.5
272 227.5（297.5）
50 68 50 Flange surface 164 87 185
7 7
150 Flange surface 69 167
26 26
Protective cap 75 75
14
F3S-45
φ45H8 φ45H8 (attachment)
87
69

φ100h7φ64 φ64φ100h7 174 48.8 □156

4-φ20.5 4-φ17.5 69
87
119.5 103 130.5

2 2 φ20
4-M20×P2.5 4-M20×P2.5 Flange surface
50 28
23 99 □80
73 73

（A）
Fig.2 108 108 A
When the protective When the protective
cap is attached. cap is attached. 272
168 164 87 185
50 50 Flange surface 7 7 Flange surface
68 150 69 167
26 26
Protective cap 75 75 14
F3S-45
φ45H8 φ45H8 (attachment)
87
69
φ100h7 φ100h7
φ64 φ64 174 48.8 φ160 φ162
4-φ20.5 4-φ17.5 69 103
87 119.5
126.5
2 2 φ20
4-M20×P2.5 73 73 4-M20×P2.5 28
□80
78
159

Fig.3 （108） （108）

168 When the protective
cap is attached.
When the protective
cap is attached. A（A）
33
50 68 50 164 235 B
Flange surface 7 7
150 87 148
26 26
75 75 Flange surface 73 134
Protective cap 14
F3S-45
φ45H8 φ45H8 (attachment)
87 73

φ100h7φ64 φ64φ100h7 174 48.8 □E

98.5
4-φ16.5 4-φ14 87 73 115
D

2 2 φ20
4-M16×P2.0 4-M16×P2.0
Flange surface
23 40 28
C □80
63 63

Fig.4 When the protective

cap is attached.
When the protective
cap is attached. 235
A（A）

Flange surface
87 148
Flange surface
73 134
Protective cap 14
F3S-45
(attachment)
87
73
174 48.8 φ179 φ186
73 98.5
87 115

φ20 137.5

28
□80
110.5

The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake

Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.75kW【IE3】 F3S45S(N)80∼240-WP08TN(W)NEN 1 519 ─ ─ ─ ─ 28.5kg
3-Phase 1.5kW【IE3】 F3S45S(N)5∼60-WP15TN(W)NEN 2 544.5 276.5 128 137.5 178 35.5kg
3-Phase 2.2kW【IE3】 F3S45S(N)5∼30-WP22TN(W)NEN 2 578 310 161 148.5 192 42kg
3-Phase 0.75kW【IE1】 F3SW(G)-45-80∼240-075(W)E 3 489.5 ─ ─ ─ ─ 25kg
3-Phase1.5kW【IE1】 F3SW(G)-45-5∼60-150(W)E 4 507 ─ ─ ─ ─ 32kg
3-Phase 2.2kW【IE1】 F3SW(G)-45-5∼30-220(W)E 4 532 ─ ─ ─ ─ 35kg
Indoor/Water-resistant Specification With Brake
Capacity
Type Fig. Number A B C D E Weight
3-Phase 0.75kW【IE3】 F3S45S(N)80∼240-WP08TN(W)NEV2(V4) 1 589 ─ ─ ─ ─ 30.5kg
3-Phase 0.75kW【IE1】 F3SV(H)-45-80∼240-075(W,P)E 3 559 ─ ─ ─ ─ 27kg

D31
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)
Leg Mount Type Water-resistant, Outdoor Gearmotor /
Water-resistant, Outdoor Gearmotor with Brake

Frame No. 50
Fig.1 172
（120）
cap is attached.
（120）
When the protective When the protective
cap is attached. 657
168 304 43 310
55 62 55 Flange surface 7 7
154 118 186 21
29 29 77 77 Flange surface 102 170
Protective cap 14
F3S-5055
(attachment)
φ50H8 φ50H8
106 90

φ110h7φ74 φ74φ110h7 212 53.8 □192

4-φ16.5 4-φ14 4-φ16.5 106 90 121

137.3 148.5

2 2 φ20
4-M16×P2.0 4-M16×P2.0
Flange surface 3-M4 28
19 40 40 19 161 □80
59 59

Fig.2
120 120 611
When the protective When the protective 304
cap is attached. cap is attached.
172 Flange surface 168 Flange surface 118 186
55 55 7 7
62 154 102 170
29 29 Protective cap
F3S-5055 77 77 14
(attachment)
φ50H8 φ50H8 106
90
φ110h7 φ74 φ74 φ110h7 212 53.8 φ186
90 121
4-φ16.5 4-φ14
106 137.3

137.5
2 2 φ20
4-M16×P2.0 4-M16×P2.0 □80 28
82 3-M4
59 59
110.5
86
The values within parentheses are of those with brake motors. 179.5

Indoor/Water-resistant Specification Without Brake

Capacity
Type Fig. Number Weight
3-Phase 2.2kW【IE3】 F3S50S(N)40∼60-WP22TN(W)NEN 1 51kg
3-Phase 2.2kW【IE1】 F3SW(G)50-40∼60-220(W)E 2 44kg

Frame No. 55
Fig.1 （143）
When the protective
（143）
When the protective
220 cap is attached. cap is attached. A
22.5
216 336 B
8 8
61 98 61 Flange surface 200 116 220
100 100 Flange surface 94 198
32 32
Protective cap 16
F3S-5055
(attachment)
φ55H8 φ55H8
130 108

φ120h7 φ79 φ79 φ120h7 260 59.3 □E

4-φ20.5 4-φ20.5 108 149

4-φ17.5 130 D
169.5

2 2 Flange surface
4-M20×P2.5 4-M20×P2.5 φ25 C □80 28
3-M4
21.5 50 50 21.5
71.5 71.5

Fig.2 143 143

When the protective When the protective
A
cap is attached. cap is attached. 336
220 Flange surface 216 Flange surface 116 220
61 61 8 8
98 200 94 198
32 32
Protective cap 100 100 16
F3S-5055
(attachment)
φ55H8 φ55H8 130
108
φ120h7 φ120h7
φ79 φ79 260 59.3 φ186
108 149
4-φ20.5 4-φ17.5
130 169.5
137.5

□80 28
2 2 φ25
4-M20×P2.5 71.5 71.5 4-M20×P2.5 3-M4
110.5
The values within parentheses are of those with brake motors.

Indoor/Water-resistant Specification Without Brake

Capacity
Type Fig. Number A B C D E Weight

3-Phase 1.5kW【IE3】 F3S55S(N)80∼240-WP15TN(W)NEN 1 635 276.5 128 137.5 178 89.5kg

3-Phase 2.2kW【IE3】 F3S55S(N)80∼120-WP22TN(W)NEN 1 668.5 310 161 148.5 192 98kg
3-Phase 1.5kW【IE1】 F3SW(G)-55-80∼240-150(W)E 2 597.5 ─ ─ ─ ─ 86kg
3-Phase 2.2kW【IE1】 F3SW(G)-55-80∼120-220(W)E 2 622.5 ─ ─ ─ ─ 91kg

D32
Outer Dimension

D33
Diagrams
Diagrams
Outer Dimension
Concentric Solid Shaft F3 Series (F3F Type)

Gearmotor / Gearmotor with Brake

Frame No. 18
Fig.1
（144.5） （296.5）
134 123 154 256.5
78 38 38 78 38 78 38 127
7 39 39 7 7 39 39 7 Flange 7 39 39
7 48.5 78.5 （200 ）
30 Flange 30 surface 30 30
surface 38.5 68.5
Flange 27 Flange 27 Flange 27 27 Flange
surface surface surface
20.5
surface
φ18h6 φ18h6
φ18h6 φ18h6 48.5
38.5
6
φ53h7 φ53h7 φ53h7 97 φ135
4-φ10.5 4-φ8.6 4-φ10.5 4-φ8.6 4-φ10.5 4-φ8.6 38.5
48.5

4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5

117

37 37 37 37 37 37 28
□70
（57.5） （57.5） （57.5） 47.5

L Shaft R Shaft T Shaft （87.5）

Fig.2 Small Frame No. Type

Flange
Flange surface
surface
Flange Flange Flange Flange
surface surface surface surface

L Shaft R Shaft T Shaft

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number Weight
3-Phase 0.1kW F3FM-18R -5∼60-T010(W)A 1 6.5kg
L
T

3-Phase 0.2kW F3FM-18R -5∼30-T020(W)A 2 7.5kg

L
T

Note）0.1kW does not have a fan cover.

Indoor Specification With Brake

Capacity
Type Fig. Number Weight
3-Phase 0.1kW F3FB-18 R
T
-5∼60-T010(W,P)A
L
1 8kg
3-Phase 0.2kW F3FB-18 R
T
-5∼30-T020(W,P)A
L
2 9kg

D34
 Diagrams
Outer Dimension
Frame No. 22
Fig.1
F G
（
A A）
B
Flange Flange
C
surface surface D
Flange Flange Flange Flange
surface surface surface surface

H H H
E

L Shaft R Shaft T Shaft

Fig.2 Small Frame No. Type

（
A A）

Flange Flange Flange Flange Flange Flange

surface surface surface surface surface surface

L Shaft R Shaft T Shaft

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A B C D E F G H Weight
3-Phase 0.1kW 95.5 ─ ─ 155 57.5 8.5kg
L
F3FM-22R
T
-80∼240-T010(W)A 1 287.5 159 105.5
3-Phase 0.2kW 76.5 78.5 165.5 162.5 64.5 9.5kg
L
F3FM-22R
T
-5∼60-T020(W)A 1 315 140 86.5
3-Phase 0.4kW ─ ─ ─ ─ ─ 11.5kg
L
F3FM-22R
T
-5∼30-T040(W)A 2 347.5 ─ ─
Note）0.1kW does not have a fan cover.

Indoor Specification With Brake

Capacity
Type Fig. Number A B C D E F G H Weight
3-Phase 0.1kW
L
F3FB-22R
T
-80∼240-T010(W,P)A 1 327.5 159 105.5 95.5 87.5 165.5 155 57.5 10kg
3-Phase 0.2kW
L
F3FB-22R
T
-5∼60-T020(W,P)A 1 332 140 86.5 76.5 95.5 165.5 159 61 11kg
3-Phase 0.4kW
L
F3FB-22R
T
-5∼30-T040(W,P)A 2 367 ─ ─ ─ ─ ─ ─ ─ 13kg

D35
Diagrams
Outer Dimension
Concentric Solid Shaft F3 Series (F3F Type)

Gearmotor / Gearmotor with Brake

Frame No. 28
Fig.1
Flange
Flange surface
surface
Flange Flange Flange Flange
surface surface surface surface

L Shaft R Shaft T Shaft

Fig.2
Flange Flange
surface surface
Flange Flange Flange Flange
surface surface surface surface

L Shaft R Shaft T Shaft

Fig.3 Small Frame No. Type
166 166 212 417.5（427.5）
31
106 53 53 106 Flange
53 106 53 159 227.5（237.5）
7 53 53 7 7 53 53 7 surface 7 53 53 7 58 101
Flange Flange
45 surface 45 Flange 45 45 48 91
Flange surface 40 40 surface 31
Flange 40 40
surface surface
φ28h6 φ28h6
φ28h6 φ28h6
58 48 8
φ75h7 φ75h7 □156
116
φ75h7
4-φ8.6 φ75h7 4-φ8.6 φ75h7 4-φ8.6 φ75h7
58 48
4-φ10.5 4-φ10.5 4-φ10.5
135
4-M10 P1.5 4-M10 P1.5 Flange surface

4-M10 P1.5 4-M10 P1.5 4-M10 P1.5 4-M10 P1.5

80 80 80
25 25 25
15.5 15.5 40.5 15.5 96 88
40.5 40.5 40.5 40.5 40.5
184
L Shaft R Shaft T Shaft

Fig.4 Small Frame No. Type

Flange Flange Flange

surface surface surface
Flange Flange Flange
surface surface surface

L Shaft R Shaft T Shaft

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number Weight
3-Phase 0.2kW 1 11kg
L
F3FM-28R
T
-80∼240-T020(W)A
3-Phase 0.4kW 2 13kg
L
F3FM-28R
T
-5∼60-T040(W)A

3-Phase 0.75kW【IE3】 3 20kg

L
F3F28R
T
5∼30-MP08TN(W)NTN
3-Phase 0.75kW【IE1】 4 16.5kg
L
F3FM-28R
T
-5∼30-075(W)

Indoor Specification With Brake

Capacity
Type Fig. Number Weight
3-Phase 0.2kW 1 12.5kg
L
F3FB-28R
T
-80∼240-T020(W,P)A

3-Phase 0.4kW 2 14.5kg

L
F3FB-28R
T
-5∼60-T040(W,P)A

3-Phase 0.75kW【IE3】 F3F28 5∼30-MP08TN(W)NTB2(B4) 3 22kg

L
R
T

D36 3-Phase 0.75kW【IE1】 F3FB-28R

T
-5∼30-075(W,P)
L
4 18.5kg
 Diagrams
Outer Dimension
Frame No. 32
Fig.1
Flange Flange
surface surface
Flange Flange Flange
surface surface Flange surface
surface

L Shaft R Shaft T Shaft

Fig.2 194 194 250 434.5（444.5）
22
124 63 63 124 63 124 63 185 227.5（237.5）
Flange
7 62 62 7 Flange 7 62 62 7 surface 7 62 62 7 68 117
55 surface 55 55 55 56 105
Flange Flange Flange Flange
surface
50 50 surface 50 50 surface
35
surface
φ32h6 φ32h6 φ32h6 φ32h6
68 56 10 □156
φ85h7 φ85h7 136
φ85h7
φ85h7 φ85h7 φ85h7
4-φ10.6 4-φ10.6 4-φ10.6 68 56
4-φ12.5 4-φ12.5 4-φ12.5 135
4-M12 P1.75 4-M12 P1.75 Flange surface
4-M12 P1.75 4-M12 P1.75
4-M12 P1.75 4-M12 P1.75
80 80 80 96 88
30 30 30
18 18 18

L Shaft R Shaft T Shaft

48 48 48 48 48 48
203 203

Fig.3 Small Frame No. Type 499（524）

37.5
194 250 185 276.5（301.5）
194
124 63 63 124 63 124 63 68 117
7 62 62 7 7 62 62 7 Flange surface 7 62 62 7 56 105
Flange Flange Flange 55 55 Flange surface
surface 55 surface 55 Flange surface 35
surface 50 50
50 50
φ32h6 φ32h6 φ32h6 φ32h6
68 56 10 □178
φ85h7 φ85h7 136
φ85h7
4-φ10.6 φ85h7 4-φ10.6 φ85h7 4-φ10.6 φ85h7 98.5
68 56 119.5
4-φ12.5 4-φ12.5 4-φ12.5 142
Flange
4-M12 P1.75 surface φ20
4-M12 P1.75
4-M12 P1.75 4-M12 P1.75 4-M12 P1.75
4-M12 P1.75
80 80 125 88
18 30 30 80
48
214
48 L Shaft 18
48
214
48 R Shaft 18
30
48 48
T Shaft

Fig.4

Flange surface Flange surface

Flange surface Flange surface Flange surface Flange surface

L Shaft R Shaft T Shaft

Fig.5 Small Frame No. Type

Flange surface Flange surface Flange surface

Flange surface Flange surface Flange surface

L Shaft R Shaft T Shaft

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity Capacity
Type Fig. Number Weight Type Fig. Number Weight

3-Phase 0.4kW 1 17kg 3-Phase 0.4kW 1 19kg

L L
F3FM-32R
T
-80∼240-T040(W)A F3FB-32R
T
-80∼240-T040(W,P)A

3-Phase 0.75kW【IE3】 F3F32R 2 22.5kg 3-Phase 0.75kW【IE3】 2 24.5kg

L L
T
5∼60-MP08TN(W)NTN F3F32R
T
5∼60-MP08TN(W)NTB2(B4)
3-Phase 1.5kW【IE3】 3 29.5kg 3-Phase 1.5kW【IE3】 3 32.5kg
L L
F3F32R
T
5∼30-MP15TN(W)NTN F3F32R
T
5∼30-MP15TN(W)NTB2(B4)
3-Phase 0.75kW【IE1】 F3FM-32R 4 19kg 3-Phase 0.75kW【IE1】 4 21kg
L L
T
-5∼60-075(W) F3FB-32R
T
-5∼60-075(W,P)
3-Phase 1.5kW【IE1】 5 26kg 3-Phase 1.5kW【IE1】 5 29kg
L L
F3FM-32R -5∼30-150(W) F3FB-32R -5∼30-150(W,P)
D37
T T
Diagrams
Outer Dimension
Concentric Solid Shaft F3 Series (F3F Type)

Gearmotor / Gearmotor with Brake

Frame No. 40
Fig.1 230 230 296 A（A）
19.5
150 73 73 150 73 150 73 272 227.5（237.5）
7 75 75 7 7 75 75 7 7 75 75 7 87 185
65 Flange surface 65 Flange surface 65 65 69 167
Flange surface 60 60 60 60 Flange surface 43
Flange surface Flange surface
φ40h6 φ40h6 φ40h6 φ40h6
87 12
69
φ100h7 φ100h7 □156
174
φ100h7
φ100h7 φ100h7 φ100h7
4-φ17.5 4-φ17.5 4-φ17.5 69 103
87 119.5 135
4-φ20.5 4-φ20.5 4-φ20.5

4-M20 P2.5 4-M20 P2.5 Flange surface φ20

4-M20 P2.5 4-M20 P2.5
4-M20 P2.5 4-M20 P2.5
80 80 80 96 88
23 50 23 50 23 50
73 73 73 73 73 73

L Shaft R Shaft T Shaft

Fig.2 150
230
73 73
230
150 73
296
150 73 235
33
A（A）
B
7 75 75 7 7 75 75 7 7 75 75 7 87 148
65 Flange Flange 65 Flange 65 65 Flange 73 134
60 60 surface Flange 60 60 43
Flange surface surface surface surface surface
φ40h6 φ40h6 φ40h6 φ40h6
87 73 12
φ100h7 φ100h7 φ100h7
174 □E
φ100h7 φ100h7 φ100h7 98.5
4-φ14 4-φ14 4-φ14 87 73 115
4-φ16.5 4-φ16.5 4-φ16.5 D
φ20
Flange surface
4-M16 P2 4-M16 P2 4-M16 P2
4-M16 P2 80 4-M16 P2 80 4-M16 P2 80
40 C 88
23 40 40
23 23
63 63 63 63
F 63 63
244

L Shaft R Shaft T Shaft

Fig.3 A（A）

Flange surface Flange surface

Flange surface Flange surface Flange surface Flange surface

L Shaft R Shaft T Shaft

Fig.4 241
230
234.5
230 296 A（A）
150 73 73 150 73 150 73 235
7 7 7 7 7 7 （250 ）
75 75 75 75 75 75 87 148
65 65 65 65 73 134
Flange surface Flange surface
60 60 60 60 43
Flange surface Flange surface Flange surface Flange surface
φ40h6 φ40h6
φ40h6 φ40h6 87
73 12
φ100h7 φ100h7 φ100h7 174 φ186
4-φ16.5 4-φ14 4-φ16.5 4-φ14 4-φ16.5 4-φ14 73 98.5
87 115

4-M16×P2 4-M16×P2 4-M16×P2 4-M16×P2 4-M16×P2 φ20 133

82 82 4-M16×P2 82 89
63 63 63 63 63 63 （132）
111.5
86 86 86

L Shaft R Shaft T Shaft

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake

Capacity
Type Fig. Number A B C D E F Weight
3-Phase 0.75kW【IE3】 F3F40R
L
T
80∼240-MP08TN(W)NTN 1 519 ─ ─ ─ ─ ─ 30.5kg
3-Phase 1.5kW【IE3】
L
F3F40R
T
5∼60-MP15TN(W)NTN 2 544.5 276.5 125 142 178 237 38.5kg
3-Phase 2.2kW【IE3】
L
F3F40R
T
5∼30-MP22TN(W)NTN 2 578 310 158 153 192 244 45kg
3-Phase 0.75kW【IE1】 F3FM-40R
L
T
-80∼240-075(W) 3 491 ─ ─ ─ ─ ─ 27kg
3-Phase 1.5kW【IE1】
L
F3FM-40R
T
-5∼60-150(W) 4 508 ─ ─ ─ ─ ─ 35kg
3-Phase 2.2kW【IE1】
L
F3FM-40R
T
-5∼30-220(W) 4 533 ─ ─ ─ ─ ─ 38kg

Indoor Specification With Brake

Capacity
Type Fig. Number A B C D E F Weight
L
3-Phase 0.75kW【IE3】 F3F40R
T
80∼240-MP08TN(W)NTB2(B4) 1 529 ─ ─ ─ ─ ─ 32.5kg
L
3-Phase 1.5kW【IE3】 F3F40R
T
5∼60-MP15TN(W)NTB2(B4) 2 569.5 301.5 125 142 178 237 41.5kg
L
3-Phase 2.2kW【IE3】 F3F40R
T
5∼30-MP22TN(W)NTB2(B4) 2 603 335 158 153 192 244 48kg
L
3-Phase 0.75kW【IE1】 F3FB-40R
T
-80∼240-075(W,P) 3 498 ─ ─ ─ ─ ─ 29kg
L
3-Phase 1.5kW【IE1】 F3FB-40R
T
-5∼60-150(W,P) 4 528.5 ─ ─ ─ ─ ─ 38kg
L
3-Phase 2.2kW【IE1】 F3FB-40R -5∼30-220(W,P) 4 553.5 ─ ─ ─ ─ ─ 41kg
D38
T
Outer Dimension

D39
Diagrams
D40
 Concentric Hollow Shaft
Gearmotor
Gearmotor with Brake
Performance Table /
Dimension Diagram
F3
Series

F3S
Type

1-Phase
【Remarks】
●Values in the parenthesis in the performance table / dimension
diagram are the values of gearmotor with brake.
●The output shaft rotation speed is the value corresponding to the
motor synchronous speed and the nominal reduction ratio.
●The key for the outout shaft is not attached to this model.
●The areas shaded with     in the performance table show
that rotation occurs clockwise as viewed from the side with
arrow Ⓐ in the diagram below if hardwired as shown on〈page
E18〉(normal rotation).
●1-Phase 100W uses a capacitor-operated motor, making
starting torque 60‒80%.

D41
Lineup
Standard Model
Concentric Hollow Shaft F3 Series (F3S Type)

Gearmotor / Gearmotor with Brake 1-Phase Performance Table

100W−400W

Output Shaft Output Shaft Output Shaft Output Shaft Outer Dimension
Allowable
Rated Rotation Speed Allowable Torque Allowable O.H.L. Diagram
Capacity Power Rated Actual Thrust Load
Frequency Rotation Frame Reduction
Motor Supply Current Reduction
Speed Number Ratio
Specification Ratio r/min N・m Kgf・ｍ
N Kgf N Kgf Indoor Type

V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz

＊1/240 1/240 6.3 7.5 101 98 10.3 10 2550 260 637 65
1/200 1/200 7.5 9 98 81 10 8.3 2550 260 637 65
1/160 1/160 9.4 11.3 78 66 8 6.7 2550 260 637 65
25 P.D45
1/120 1/120 12.5 15 59 49 6 5 2550 260 637 65
1/100 19/1880 15 18 49 41 5 4.2 2550 260 637 65
1/80 1/80 18.8 22.5 39 32 4 3.3 2550 260 637 65
1/60 1/59 25 30 31 25 3.2 2.6 1860 190 471 48
1/50 1/50 30 36 25 22 2.6 2.2 1860 190 471 48
1-Phase 100 50 1.7 1400
1/40 1/40 37.5 45 21 18 2.1 1.8 1810 185 451 46
100W 100 60 1.9 1700
1/30 2/59 50 60 16 13 1.6 1.3 1670 170 422 43
1/25 1/25 60 72 13 11 1.3 1.1 1570 160 392 40
20 1/20 1/20 75 90 11 8.6 1.1 0.88 1470 150 373 38 P.D44
1/15 1/15 100 120 7.7 6.5 0.79 0.66 1320 135 333 34
1/12.5 2/25 120 144 6.5 5.4 0.66 0.55 1270 130 316 32
1/10 1/10 150 180 5.2 4.3 0.53 0.44 1180 120 294 30
1/7.5 2/15 200 240 3.8 3.2 0.39 0.33 1080 110 270 28
1/5 1/5 300 360 2.5 2.2 0.26 0.22 980 100 244 25
＊1/240 1/240 6.3 7.5 184 184 18.8 18.8 3140 320 785 80
＊1/200 1/200 7.5 9 184 175 18.8 17.9 3140 320 785 80
1/160 1/160 9.4 11.3 169 140 17.9 14.3 3140 320 785 80
30 P.D46
1/120 1/120 12.5 15 126 105 12.9 10.7 3140 320 785 80
1/100 19/1880 15 18 105 87 10.7 8.9 3140 320 785 80
1/80 1/80 18.8 22.5 84 71 8.6 7.2 3090 315 775 79
1/60 1/60 25 30 67 55 6.8 5.6 2550 260 637 65
1/50 1/50 30 36 55 46 5.6 4.7 2450 250 613 63
1-Phase 100 50 5.1 1420
1/40 1/40 37.5 45 44 37 4.5 3.8 2300 235 576 59
200W 100 60 4.5 1700
1/30 1/30 50 60 33 27 3.4 2.8 2110 215 527 54
1/25 1/25 60 72 27 24 2.8 2.4 2010 205 502 51
25 1/20 1/20 75 90 23 19 2.3 1.9 1860 190 466 48 P.D45
1/15 1/15 100 120 17 14 1.7 1.4 1720 175 429 44
1/12.5 19/235 120 144 14 12 1.4 1.2 1620 165 405 41
1/10 1/10 150 180 11 9.2 1.1 0.94 1520 155 380 39
1/7.5 2/15 200 240 8.3 7 0.85 0.71 1370 140 342 35
1/5 1/5 300 360 5.5 4.6 0.56 0.47 1230 125 307 31
＊1/240 1/240 6.3 7.5 270 270 27.6 27.6 3630 370 912 93
＊1/200 1/200 7.5 9 270 270 27.6 27.6 3630 370 912 93
＊1/160 1/160 9.4 11.3 270 270 27.6 27.6 3630 370 912 93
35 P.D46
1/120 1/120 12.5 15 253 211 25.8 21.5 3530 360 883 90
1/100 19/1880 15 18 211 175 21.5 17.9 3530 360 883 90
1/80 1/80 18.8 22.5 169 140 17.2 14.3 3480 355 873 89
1/60 1/60 25 30 133 111 13.6 11.3 3090 315 767 78
1/50 1/50 30 36 111 92 11.3 9.4 2990 305 747 76
1-Phase 100 50 8.7 1440
1/40 1/40 37.5 45 88 74 9 7.5 2840 290 711 73
400W 100 60 7.9 1730
1/30 1/30 50 60 67 55 6.8 5.6 2650 270 662 68
1/25 1/25 60 72 55 46 5.6 4.7 2550 260 637 65
30 1/20 1/20 75 90 44 37 4.5 3.8 2400 245 600 61 P.D46
1/15 1/15 100 120 33 27 3.4 2.8 2160 220 539 55
1/12.5 19/235 120 144 27 24 2.8 2.4 2060 210 506 52
1/10 1/10 150 180 23 19 2.3 1.9 1910 195 475 48
1/7.5 2/15 200 240 17 14 1.7 1.4 1760 180 438 45
1/5 1/5 300 360 11 9.2 1.1 0.94 1520 155 375 38

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D41〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D42
Standard Model

D43
Lineup
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

1-Phase Gearmotor / Gearmotor with Brake

Frame No. 20
64 64
When the protective When the protective
cap is attached. cap is attached. 296.5
92 127
7 7
96 78 Flange surface 48.5 78.5
24 24 Flange surface
48 39 39 38.5 68.5
13 13 Protective cap
F3S-20 6

φ20H8 φ20H8 (attachment)

48.5
φ53h7 φ53h7 38.5
φ29 φ29 97 22.8 φ135
4-φ10.5 4-φ8.6 38.5
48.5

2 2
4-M10×P1.5 4-M10×P1.5
37 37
100 （200 ）
57.5
125.5

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity
Type Weight Type Weight

1-Phase 0.1kW F3SM-20-5∼60-S100(W) 7kg F3SB-20-5∼60-S100(W) 8kg

D44
 Diagrams
Outer Dimension
Frame No. 25
Fig.1
79 79
When the protective When the protective 327.5
cap is attached. cap is attached.
114 159
7 7
118 Flange surface 100 Flange surface 53.5 105.5
27 64 27 43.5
50 50 95.5
14 14 Protective cap
F3S-25 8

φ25H8 φ25H8 (attachment)

53.5
φ66h7 φ66h7 43.5
φ39 φ39 107 28.3 φ135
4-φ10.5 4-φ8.6 43.5
53.5

2 2
4-M10×P1.5 4-M10×P1.5
39.5 39.5
57.5 100 （200 ）
126.5

Fig.2
When the protective When the protective
cap is attached. cap is attached.
Flange surface Flange surface
Protective cap
F3S-25
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity
Type Fig. Number Weight Type Fig. Number Weight

1-Phase 100W F3SM-25-80∼240-S100(W) 1 9kg F3SB-25-80∼240-S100(W) 1 10kg

1-Phase 200W F3SM-25-5∼60-200(W) 2 11.5kg F3SB-25-5∼60-200(W) 2 13kg

D45
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

1-Phase Gearmotor / Gearmotor with Brake

Frame No. 30
Fig.1
When the protective When the protective
cap is attached. cap is attached.
Flange surface Flange surface
Protective cap
F3S-30
(attachment)

Fig.2 When the protective When the protective

cap is attached. cap is attached.
Flange surface Flange surface
Protective cap
F3S-30
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity
Type Fig. Number Weight Type Fig. Number Weight

1-Phase 200W F3SM-30-80∼240-200(W) 1 13kg F3SB-30-80∼240-200(W) 1 14.5kg

1-Phase 400W F3SM-30-5∼60-400(W) 2 17.5kg F3SB-30-5∼60-400(W) 2 20kg

Frame No. 35

When the protective When the protective

Flange surface cap is attached. cap is attached. Flange surface
Protective cap
F3S-35
(attachment)

The values within parentheses are of those with brake motors.

Indoor Specification Without Brake Indoor Specification With Brake

Capacity
Type Weight Type Weight

1-Phase 400W F3SM-35-80∼240-400(W) 21kg F3SB-35-80∼240-400(W) 23.5kg

D46
Outer Dimension

D47
Diagrams
D48
 Concentric Hollow Shaft
Reducers
(Double Shaft Type)
Model and Type Designation
Standard Model Lineup
F3
Series

The Capacity of 4P Equivalent Motor Equivalent of 0.1kW−2.2kW

Reduction Method Hypoid Gear and Helical Gear
Lubrication Method Grease Lubrication (Maintenance Free)
Reducer Output Shaft New JIS Key (JIS B 1301-1996 Standard) Note) Key materials are included.
Output Shaft Material S43C
Case Material Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
Ambient Temperature −10℃−+40℃
Ambient Humidity 85% Max. (Without Any Dew Condensation)
Altitude 1,000m Max.
Ambient Conditions
Environment Well ventilated place free from corrosive gas,
explosive gas, vapors and/or dust.
Installation Location Indoor
Painting Method Anion Painting, Acrylic Paint
Painting
Painting Color Grey (Munsell code: 9B6/0.5)
Mounting Direction No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles

D49
 Model and Type Designation
Type Designation
Model and

F3 Series F3S Type（Concentric Hollow Shaft）

F3 series Double Shaft Type Reducers are classified by codes as shown below.
Specify these codes in your inquiry and order.

Series Mount Motor Type Frame Reduction Capacity Option Terminal Box Auxiliary Mark Spec. Designation
Number Ratio
F3 S 30 50 040
F3 S 45 240 075 X
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩

①Series Name F3 ：F3 Series

（Concentric Hollow Shaft）

②Classification by Mount Form S ：Concentric Hollow Shaft （Note 1）

③Classification by Motor Type Blank：Without Motor（Double Shaft Type）

④Frame No. and Diameter of Output Shaft Output Shaft Diameter (Inner Diameter)

⑤Reduction Ratio 5 : 1／5 − 240 : 1／240

010 ：0.1kW or equiv.

020 ：0.2kW or equiv.

040 ：0.4kW or equiv.

⑥Equivalent Capacity
075 ：0.75kW or equiv.

150 ：1.5kW or equiv.

220 ：2.2kW or equiv.

Blank：Standard Specifications
⑦⑧Options
No option is available.

Blank：Standard Specifications
⑨Auxiliary Mark
X ：Mark for Special Additional Specs.

⑩Spec. Designation
Note) Spec. Designation is not shown as a
part of the product model name on the Blank：Standard Specifications
nameplate. It is shown in the Spec.
Designation column on the nameplate.

Note 1）Please note that F3 series Double Shaft Type Reducers have the F3S type (Hollow Shaft) only, and do not have the F3F type (Solid Shaft).

D50
 Lineup
Standard Model
Standard Model Lineup
F3S Type (Hollow Shaft) Model Lineup
4P Motor Frame Reduction Ratio
Type Capacity Number

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

20
1/50 1/60
0.1kW
25 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

25
1/50 1/60
0.2kW
30 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

30
1/50 1/60
0.4kW
35 1/80 1/100 1/120 1/160 1/200 1/240
Reducer
(Double Shaft Type)
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
35
1/50 1/60
0.75kW
45 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

45
1/50 1/60
1.5kW
55 1/80 1/100 1/120 1/160 1/200 1/240

45 1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30

2.2kW 50 1/40 1/50 1/60

55 1/80 1/100 1/120

Note The models enclosed with "   " are the low torque type. Special care should be given to
the allowable torque in the performance table.

D51
D52
 Concentric Hollow Shaft
Reducer
(Double Shaft Type)
Performance Table /
Dimension Diagram
F3
Series

【Remarks】
●The corresponding motor capacities are the values when using
F3S
Type
a 4-pole motor.
●The key for the outout shaft is not attached to this model.

■Relation for Rotating Direction（As viewed from the side with arrow Ⓐ in the diagram below）
The rotation directions shown by the arrows just show rotation in relation to
input/output shafts, and do not limit rotation direction.

Capacity Reduction Ratio Capacity Reduction Ratio

F3S Type 0.1kW∼2.2kW 1/5∼1/60 F3S Type 0.1kW∼0.75kW 1/80∼1/240

A A

D53
Lineup
Standard Model
Concentric Hollow Shaft F3 Series (F3S Type)

Double Shaft Type Performance Table

Equivalent of 0.1kW−0.4kW

Output Shaft Output Shaft

Capacity Actual Allowable O.H.L. Allowable Thrust Load Outer
Frame Reduction Allowable Torque Inpu
Motor Reduction Ratio Dimension
Number Ratio （1500r/min)
Specification （Fraction） N Kgf Diagram
N Kgf
N・m Kgf・ｍ Input Shaft Output Shaft Input Shaft Output Shaft
＊1/240 1/240 101 10.3 2550 260 637 65
1/200 1/200 98 10 2550 260 637 65
1/160 1/160 78 8 2550 260 637 65
25 196 20 P.D56
1/120 1/120 59 6 2550 260 637 65
1/100 19/1880 49 5 2550 260 637 65
1/80 1/80 39 4 2550 260 637 65
1/60 1/59 31 3.2 1860 190 471 48
1/50 1/50 25 2.6 1860 190 471 48
Equivalent of 1/40 1/40 21 2.1 1810 185 451 46
0.1kW 1/30 2/59 16 1.6 1670 170 422 43
1/25 1/25 13 1.3 1570 160 392 40
20 1/20 1/20 11 1.0 196 1470 20 150 373 38 P.D56
1/15 1/15 7.7 0.79 1320 135 333 34
1/12.5 2/25 6.5 0.66 1270 130 316 32
1/10 1/10 5.2 0.53 1180 120 294 30
1/7.5 2/15 3.8 0.39 1080 110 270 28
1/5 1/5 2.5 0.26 980 100 244 25
＊1/240 1/240 184 18.8 3140 320 785 80
＊1/200 1/200 184 18.8 3140 320 785 80
1/160 1/160 169 17.9 3140 320 785 80
30 245 25 P.D57
1/120 1/120 126 12.9 3140 320 785 80
1/100 19/1880 105 10.7 3140 320 785 80
1/80 1/80 84 8.6 3090 315 775 79
1/60 1/60 67 6.8 2550 260 637 65
1/50 1/50 55 5.6 2450 250 613 63
Equivalent of
1/40 1/40 44 4.5 2300 235 576 59
0.2kW
1/30 1/30 33 3.4 2110 215 527 54
1/25 1/25 27 2.8 2010 205 502 51
25 1/20 1/20 23 2.3 245 1860 25 190 466 48 P.D56
1/15 1/15 17 1.7 1720 175 429 44
1/12.5 19/235 14 1.4 1620 165 405 41
1/10 1/10 11 1.1 1520 155 380 39
1/7.5 2/15 8.3 0.85 1370 140 342 35
1/5 1/5 5.5 0.56 1230 125 307 31
＊1/240 1/240 270 27.6 3630 370 912 93
＊1/200 1/200 270 27.6 3630 370 912 93
＊1/160 1/160 270 27.6 3630 370 912 93
35 294 30 P.D57
1/120 1/120 253 25.8 3530 360 883 90
1/100 19/1880 211 21.5 3530 360 883 90
1/80 1/80 169 17.2 3480 355 873 89
1/60 1/60 133 13.6 3090 315 767 78
1/50 1/50 111 11.3 2990 305 747 76
Equivalent of
1/40 1/40 88 9 2840 290 711 73
0.4kW
1/30 1/30 67 6.8 2650 270 662 68
1/25 1/25 55 5.6 2550 260 637 65
30 1/20 1/20 44 4.5 294 2400 30 245 600 61 P.D57
1/15 1/15 33 3.4 2160 220 539 55
1/12.5 19/235 27 2.8 2060 210 506 52
1/10 1/10 23 2.3 1910 195 475 48
1/7.5 2/15 17 1.7 1760 180 438 45
1/5 1/5 11 1.1 1520 155 375 38

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D53〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D54
 Lineup
Standard Model
Equivalent of 0.75kW−2.2kW

Output Shaft Output Shaft

Capacity Actual Allowable O.H.L. Allowable Thrust Load Outer
Frame Reduction Allowable Torque Inpu
Motor Reduction Ratio Dimension
Number Ratio （1500r/min)
Specification （Fraction） N Kgf Diagram
N Kgf
N・m Kgf・ｍ Input Shaft Output Shaft Input Shaft Output Shaft
※1/240 1/240 554 56.5 5190 530 1275 130
※1/200 1/200 554 56.5 5190 530 1275 130
※1/160 1/160 554 56.5 5190 530 1275 130
45 392 40 P.D58
1/120 1/120 473 48.3 4750 485 1177 120
1/100 19/1880 395 40.3 4750 485 1177 120
1/80 1/80 316 32.2 4750 485 1177 120
1/60 1/60 249 25.4 3480 355 870 89
1/50 1/50 208 21.2 3480 355 870 89
Equivalent of 1/40 1/40 166 16.9 3480 355 870 89
0.75kW 1/30 1/30 124 12.7 3280 335 821 84
1/25 1/25 104 10.6 3190 325 796 81
35 1/20 1/20 83 8.5 392 2990 40 305 747 76 P.D57
1/15 1/15 63 6.4 2740 280 686 70
1/12.5 19/235 52 5.3 2600 265 669 68
1/10 1/10 41 4.2 2450 250 613 63
1/7.5 2/15 31 3.2 2250 230 567 58
1/5 1/5 21 2.1 1960 200 500 51
※1/240 1/240 1264 129 9800 1000 2452 250
※1/200 1/200 1264 129 9020 920 2256 230
1/160 1/160 1264 129 8330 850 2059 210
55 392 40 P.D59
1/120 1/120 947 96.6 7500 765 1863 190
1/100 1/100 789 80.5 6420 655 1618 165
1/80 1/80 631 64.4 6420 655 1618 165
1/60 1/60 498 50.8 4750 485 1067 109
1/50 1/50 416 42.4 4750 485 1067 109
Equivalent of
1/40 1/40 332 33.9 4750 485 1067 109
1.5kW
1/30 1/30 249 25.4 4750 485 1067 109
1/25 1/25 208 21.2 4700 480 1067 109
45 1/20 1/20 166 16.9 392 4460 40 455 1067 109 P.D58
1/15 1/15 124 12.7 4070 415 1067 109
1/12.5 19/235 104 10.6 3920 400 1040 106
1/10 1/10 83 8.5 3630 370 967 99
1/7.5 2/15 63 6.4 3330 340 900 92
1/5 1/5 41 4.2 2940 300 800 82
※1/120 1/120 1264 129 7500 765 1863 190
55 1/100 1/100 1156 118 392 6420 40 655 1618 165 P.D59
1/80 1/80 926 94.5 6420 655 1618 165
1/60 1/60 731 74.6 5240 535 1275 130
50 1/50 1/50 609 62.1 392 5240 40 535 1275 130 P.D58
1/40 1/40 487 49.7 5240 535 1275 130
Equivalent of 1/30 1/30 366 37.3 4750 485 1067 109
2.2kW 1/25 1/25 305 31.1 4750 485 1067 109
1/20 1/20 244 24.9 4750 485 1067 109
1/15 1/15 182 18.6 4410 450 1067 109
45 392 40 P.D58
1/12.5 19/235 152 15.5 4120 420 1040 106
1/10 1/10 122 12.4 3920 400 967 99
1/7.5 2/15 91 9.3 3530 360 900 92
1/5 1/5 61 6.2 3140 320 800 82

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D53〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D55
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

Reducer (Double Shaft Type)

Frame No. 20

64 64
When the protective When the protective 208
cap is attached. cap is attached.
92 127
7 7 25
96 78 48.5 78.5
24 24 Flange surface Flange surface 22
48 39 39 38.5 68.5
13 13 Protective cap
6
F3S-20
φ20H8 φ20H8 (attachment)
48.5 13.5
38.5 φ12h6 4
φ53h7 φ53h7
φ29 φ29 97 22.8 φ115 φ114.5
4-φ10.5 4-φ8.6 38.5
48.5

2 2
4-M10×P1.5 4-M10×P1.5
37 37

The values within parentheses are of those with brake motors.

Capacity Type Weight

Equivalent of 0.1kW F3S-20-5∼60-010 3.5kg

Frame No. 25

79 79
When the protective When the protective A
cap is attached. cap is attached.
114 B
7 7 25
118 100 53.5 C
27 27 Flange surface Flange surface 22
64 50 50 43.5 D
14 14 Protective cap
F3S-25 8

φ25H8 φ25H8 (attachment)

53.5 13.5
43.5 φ12h6 4
φ66h7 φ66h7
φ39 φ39 107 28.3 φ115 φ114.5
4-φ10.5 E 43.5
53.5

2 2
4-M10×P1.5 39.5 39.5 4-M10×P1.5

The values within parentheses are of those with brake motors.

Capacity Type A B C D E Weight

Equivalent of 0.1kW F3S-25-80∼240-010 239 159 105.5 95.5 4-φ8.6 5kg
Equivalent of 0.2kW F3S-25-5∼60-020 220.5 140 86.5 76.5 ─ 5kg

D56
 Diagrams
Outer Dimension
Frame No. 30

82 82
When the protective When the protective A
cap is attached. cap is attached.
120 B
7 106 7 G
124 Flange surface Flange surface 58 C
33 58 33 H
53 53 48 D
17 17 Protective cap
F3S-30 8

φ30H8 φ30H8 (attachment)

58 L
E φI K
φ75h7 φ75h7
φ44 φ44 116 33.3 φF φJ
M O E
58

2 2
N P P N

The values within parentheses are of those with brake motors.

Capacity Type A B C D E F G H I J K L M N O P Weight

Equivalent of 0.2kW F3S-30-80∼240-020 260 180 122 110 46 115 25 22 12h6 114.5 4 13.5 4-φ12.5 4-M12×P1.75 4-φ10.6 45.5 6.5kg
Equivalent of 0.4kW F3S-30-5∼60-040 258 159 101 91 48 128 30 27 15h6 127 5 17 4-φ10.5 4-M10×P1.5 4-φ8.6 40.5 6kg

Frame No. 35

95 95 A
When the protective When the protective B
cap is attached. cap is attached. F
142 Flange surface 7 138 Flange surface 68 C
38 38 124 7 G
66 56 D
20 20 Protective cap
F3S-35 62 62 10
(attachment)
φ35H8 φ35H8
68 K
E φH J
φ85h7 φ85h7
φ49 φ49 136 38.3 φI
L N E
68

2 2
M O O M

The values within parentheses are of those with brake motors.

Capacity Type A B C D E F G H I J K L M N O Weight

Equivalent of 0.4kW F3S-35-80∼240-040 316.5 222 154 140 54 30 27 15h6 127 5 17 4-φ16.5 4-M16×P2 ─ 58 9.5kg
Equivalent of 0.75kW F3S-35-5∼60-075 296.5 185 117 105 56 35 32 20h6 142 6 22.5 4-φ12.5 4-M12×P1.75 4-φ10.6 48 8kg

D57
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

Reducer (Double Shaft Type)

Frame No. 45
Fig.1 108 108
381
When the protective When the protective
cap is attached. cap is attached. 272
35
168 164 87 185
50 50 Flange surface 7 7 Flange surface 32
68 150 69 167
26 26
Protective cap 75 75 14
F3S-45
φ45H8 φ45H8 (attachment) 87 22.5
69 φ20h6 6
φ100h7 φ100h7
φ64 φ64 174 48.8 φ142
4-φ20.5 4-φ17.5 69 103
87 119.5

2 2 φ20
4-M20×P2.5 73 73 4-M20×P2.5

Fig.2 108 108 A

When the protective When the protective 235
cap is attached. cap is attached. B
168 164 87 148
50 50 Flange surface 7 7 Flange surface C
68 150 73 134
26 26 Protective cap 75 75 14
F3S-45
φ45H8 φ45H8 (attachment)
87 E
73 φD 8
φ100h7 φ100h7
φ64 174 48.8 φ165
φ64
73 98.5
4-φ16.5 4-φ14
87 115

2 2 φ20
4-M16×P2.0 63 63 4-M16×P2.0

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number A B C D E Weight

Equivalent of 0.75kW F3S-45-80∼240-075 1 ─ ─ ─ ─ ─ 16.5kg
Equivalent of 1.5kW F3S-45-5∼60-150 2 384.5 40 35 25h6 28 17kg
Equivalent of 2.2.kW F3S-45-5∼30-220 2 396.5 45 40 30h6 33 18kg

Frame No. 50

120 120
When the protective When the protective 475.5
cap is attached. cap is attached. 304
Flange surface 168 Flange surface 45
172 118 186
55 55 7 7 40
62 154 102 170
29 29 Protective cap
F3S-5055 77 77 14
(attachment)
φ50H8 φ50H8 106
φ30h6 8 33
90
φ110h7 φ74 φ74φ110h7 212 53.8
90 121
4-φ16.5 4-φ14
106 137.3

2 2 φ20
4-M16×P2.0 59 59 4-M16×P2.0 3-M4

The values within parentheses are of those with brake motors.

Capacity Type Weight

Equivalent of 2.2.kW F3S-50-40∼60-220 27kg

D58
 Diagrams
Outer Dimension
Frame No. 55
143 143 A
When the protective When the protective B
cap is attached. cap is attached. 336
216 C
220 Flange surface Flange surface 116 220
61 61 8 8
98 200 94 198
32 32 Protective cap 100 100 16
F3S-5055
(attachment)
φ55H8 φ55H8 130 E
φD
108 8
φ120h7 φ120h7
φ79 φ79 260 59.3

4-φ20.5 4-φ17.5 108 149

130 169.5

2 2 φ25
4-M20×P2.5 71.5 71.5 4-M20×P2.5 3-M4

The values within parentheses are of those with brake motors.

Capacity Type A B C D E Weight

Equivalent of 1.5kW F3S-55-80∼240-150 475 40 35 25h6 28 73kg
Equivalent of 2.2.kW F3S-55-80∼120-220 487 45 40 30h6 33 74kg

D59
D60
 Concentric Hollow Shaft
S-Type Reducer
(Designated Motor Attachable Type)

Model and Type Designation

Standard Model Lineup
F3
Series

The Capacity of 4P Equivalent Motor Equivalent of 0.1kW−2.2kW

Reduction Method Hypoid Gear and Helical Gear
Lubrication Method Grease Lubrication (Maintenance Free)
Reducer Output Shaft New JIS Key (JIS B 1301-1996 Standard) Note) Key materials are included.
Output Shaft Material S43C
Case Material Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
Ambient Temperature −10℃−+40℃
Ambient Humidity 85% Max. (Without Any Dew Condensation)
Altitude 1,000m Max.
Ambient Conditions
Environment Well ventilated place free from corrosive gas,
explosive gas, vapors and/or dust.
Installation Location Indoor
Painting Method Anion Painting, Acrylic Paint
Painting
Painting Color Grey (Munsell code: 9B6/0.5)
Mounting Direction No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles

D61
 Model and Type Designation
Type Designation
Model and

F3 Series F3S Type（Concentric Hollow Shaft）

F3 series S Type Reducers are classified by codes as shown below.
Specify these codes in your inquiry and order.

Series Frame Reduction

Mount Motor Type Number Ratio Capacity Option Terminal Box Auxiliary Mark Spec. Designation

F3 S S 30 50 040
F3 S S 45 240 075 X
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩

①Series Name F3 ：F3 Series

（Concentric Hollow Shaft）

②Classification by Mount Form S ：Concentric Hollow Shaft （Note 1）

③Classification by Motor Type S ：Designated Motor Attachable Type (S-Type)

④Frame No. and Diameter of Output Shaft Output Shaft Diameter (Inner Diameter)

⑤Reduction Ratio 5 : 1／5 − 240 : 1／240

010 ：0.1kW or equiv.

020 ：0.2kW or equiv.

040 ：0.4kW or equiv.

⑥Equivalent Capacity
075 ：0.75kW or equiv.

150 ：1.5kW or equiv.

220 ：2.2kW or equiv.

⑦⑧Options Blank：Standard Specifications

Blank：Standard Specifications
⑨Auxiliary Mark
X ：Mark for Special Additional Specs
⑩Spec. Designation
Note) Spec. Designation is not shown as a
part of the product model name on the Blank : Standard Specifications
nameplate. It is shown in the Spec.
Designation column on the nameplate.

Note 1) Please note that F3 series S-Type Reducers have the F3S type (Hollow Shaft) only, and do not have the F3F type (Solid Shaft).

D62
 Lineup
Standard Model
Standard Model Lineup
F3S Type (Hollow Shaft) Model Lineup
4P Motor Frame Reduction Ratio
Type Capacity Number

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

20
1/50 1/60
0.1kW
25 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

25
1/50 1/60
0.2kW
30 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

30
1/50 1/60
0.4kW
35 1/80 1/100 1/120 1/160 1/200 1/240

S-Type Reducer
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
35
1/50 1/60
0.75kW
45 1/80 1/100 1/120 1/160 1/200 1/240

1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40

45
1/50 1/60
1.5kW
55 1/80 1/100 1/120 1/160 1/200 1/240

45 1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30

2.2kW 50 1/40 1/50 1/60

55 1/80 1/100 1/120

Note The models enclosed with "   " are the low torque type. Special care should be given to
the allowable torque in the performance table.

D63
D64
 Concentric Hollow Shaft
S-Type Reducer
(Designated Motor Attachable Type)

Performance Table /
Dimension Diagram
F3
Series

F3S
Type

【Remarks】
●Please refer to〈page D53〉 for the output shaft rotation direction in
regard to input/output shaft rotation direction.
●The values of output shaft allowable torque indicate the values
during operation of a 4-pole motor.
●If used with motors other than a 4-pole motor, the value with the
torque correction coefficient on〈page E54〉multiplied to it is the
rotation's output shaft allowable torque.
●The key for the outout shaft is not attached to this model.

D65
Lineup
Standard Model
Concentric Hollow Shaft F3 Series (F3S Type)

S-Type Reducer Performance Table

Equivalent of 0.1kWー0.4kW

Output Shaft Output Shaft Output Shaft

Capacity Actual Allowable Torque Allowable O.H.L. Allowable Thrust Load
Frame Reduction Outer Dimension
Motor Reduction Ratio
Number Ratio Diagram
Specification （Fraction） N・m Kgf・ｍ
N Kgf N Kgf
50Hz 60Hz 50Hz 60Hz
＊1/240 1/240 101 98 10.3 10 2550 260 637 65
1/200 1/200 98 81 10 8.3 2550 260 637 65
1/160 1/160 78 66 8 6.7 2550 260 637 65
25 P.D68
1/120 1/120 59 49 6 5 2550 260 637 65
1/100 19/1880 49 41 5 4.2 2550 260 637 65
1/80 1/80 39 32 4 3.3 2550 260 637 65
1/60 1/59 31 25 3.2 2.6 1860 190 471 48
1/50 1/50 25 22 2.6 2.2 1860 190 471 48
Equivalent of
1/40 1/40 21 18 2.1 1.8 1810 185 451 46
0.1kW
1/30 2/59 16 13 1.6 1.3 1670 170 422 43
1/25 1/25 13 11 1.3 1.1 1570 160 392 40
20 1/20 1/20 11 8.6 1.1 0.88 1470 150 373 38 P.D68
1/15 1/15 7.7 6.5 0.79 0.66 1320 135 333 34
1/12.5 2/25 6.5 5.4 0.66 0.55 1270 130 316 32
1/10 1/10 5.2 4.3 0.53 0.44 1180 120 294 30
1/7.5 2/15 3.8 3.2 0.39 0.33 1080 110 270 28
1/5 1/5 2.5 3.2 0.26 0.22 980 100 244 25
＊1/240 1/240 184 184 18.8 18.8 3140 320 785 80
＊1/200 1/200 184 175 18.8 17.9 3140 320 785 80
1/160 1/160 169 140 17.9 14.3 3140 320 785 80
30 P.D69
1/120 1/120 126 105 12.9 10.7 3140 320 785 80
1/100 19/1880 105 87 10.7 8.9 3140 320 785 80
1/80 1/80 84 71 8.6 7.2 3090 315 775 79
1/60 1/60 67 55 6.8 5.6 2550 260 637 65
1/50 1/50 55 46 5.6 4.7 2450 250 613 63
Equivalent of
1/40 1/40 44 37 4.5 3.8 2300 235 576 59
0.2kW
1/30 1/30 33 27 3.4 2.8 2110 215 527 54
1/25 1/25 27 24 2.8 2.4 2010 205 502 51
25 1/20 1/20 23 19 2.3 1.9 1860 190 466 48 P.D68
1/15 1/15 17 14 1.7 1.4 1720 175 429 44
1/12.5 19/235 14 12 1.4 1.2 1620 165 405 41
1/10 1/10 11 9.2 1.1 0.94 1520 155 380 39
1/7.5 2/15 8.3 7 0.85 0.71 1370 140 342 35
1/5 1/5 5.5 4.6 0.56 0.47 1230 125 307 31
＊1/240 1/240 270 270 27.6 27.6 3630 370 912 93
＊1/200 1/200 270 270 27.6 27.6 3630 370 912 93
＊1/160 1/160 270 270 27.6 27.6 3630 370 912 93
35 P.D70
1/120 1/120 253 211 25.8 21.5 3530 360 883 90
1/100 19/1880 211 175 21.5 17.9 3530 360 883 90
1/80 1/80 169 140 17.2 14.3 3480 355 873 89
1/60 1/60 133 111 13.6 11.3 3090 315 767 78
1/50 1/50 111 92 11.3 9.4 2990 305 747 76
Equivalent of
1/40 1/40 88 74 9 7.5 2840 290 711 73
0.4kW
1/30 1/30 67 55 6.8 5.6 2650 270 662 68
1/25 1/25 55 46 5.6 4.7 2550 260 637 65
30 1/20 1/20 44 37 4.5 3.8 2400 245 600 61 P.D69
1/15 1/15 33 27 3.4 2.8 2160 220 539 55
1/12.5 19/235 27 24 2.8 2.4 2060 210 506 52
1/10 1/10 23 19 2.3 1.9 1910 195 475 48
1/7.5 2/15 17 14 1.7 1.4 1760 180 438 45
1/5 1/5 11 9.2 1.1 0.94 1520 155 375 38

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D53〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D66
 Lineup
Standard Model
Equivalent of 0.75kWー2.2kW

Output Shaft Output Shaft Output Shaft

Capacity Actual Allowable Torque Allowable O.H.L. Allowable Thrust Load
Frame Reduction Outer Dimension
Motor Reduction Ratio
Number Ratio Diagram
Specification （Fraction） N・m Kgf・ｍ
N Kgf N Kgf
50Hz 60Hz 50Hz 60Hz
＊1/240 1/240 554 554 56.5 56.5 5190 530 1275 130
＊1/200 1/200 554 554 56.5 56.5 5190 530 1275 130
＊1/160 1/160 554 526 56.5 53.7 5190 530 1275 130
45 P.D71
1/120 1/120 473 395 48.3 40.3 4750 485 1177 120
1/100 19/1880 395 328 40.3 33.5 4750 485 1177 120
1/80 1/80 316 263 32.2 26.8 4750 485 1177 120
1/60 1/60 249 208 25.4 21.2 3480 355 870 89
1/50 1/50 208 173 21.2 17.7 3480 355 870 89
Equivalent of
1/40 1/40 166 138 16.9 14.1 3480 355 870 89
0.75kW
1/30 1/30 124 104 12.7 10.6 3280 335 821 84
1/25 1/25 104 86 10.6 8.8 3190 325 796 81
35 1/20 1/20 83 70 8.5 7.1 2990 305 747 76 P.D70
1/15 1/15 63 52 6.4 5.3 2740 280 686 70
1/12.5 19/235 52 43 5.3 4.4 2600 265 669 68
1/10 1/10 41 34 4.2 3.5 2450 250 613 63
1/7.5 2/15 31 25 3.2 2.6 2250 230 567 58
1/5 1/5 21 18 2.1 1.8 1960 200 500 51
＊1/240 1/240 1264 1264 129 129 9800 1000 2452 250
＊1/200 1/200 1264 1264 129 129 9020 920 2256 230
1/160 1/160 1264 1049 129 107 8330 850 2059 210
55 P.D72
1/120 1/120 947 789 96.6 80.5 7500 765 1863 190
1/100 1/100 789 658 80.5 67.1 6420 655 1618 165
1/80 1/80 631 526 64.4 53.7 6420 655 1618 165
1/60 1/60 498 416 50.8 42.4 4750 485 1067 109
1/50 1/50 416 345 42.4 35.2 4750 485 1067 109
Equivalent of
1/40 1/40 332 276 33.9 28.2 4750 485 1067 109
1.5kW
1/30 1/30 249 208 25.4 21.2 4750 485 1067 109
1/25 1/25 208 173 21.2 17.7 4700 480 1067 109
45 1/20 1/20 166 138 16.9 14.1 4460 455 1067 109 P.D71
1/15 1/15 124 104 12.7 10.6 4070 415 1067 109
1/12.5 19/235 104 86 10.6 8.8 3920 400 1040 106
1/10 1/10 83 70 8.5 7.1 3630 370 967 99
1/7.5 2/15 63 52 6.4 5.3 3330 340 900 92
1/5 1/5 41 34 4.2 3.5 2940 300 800 82
＊1/120 1/120 1264 1156 129 118 7500 765 1863 190
55 1/100 1/100 1156 964 118 98.4 6420 655 1618 165 P.D72
1/80 1/80 926 771 94.5 78.7 6420 655 1618 165
1/60 1/60 731 609 74.6 62.1 5240 535 1275 130
50 1/50 1/50 609 508 62.1 51.8 5240 535 1275 130 P.D72
1/40 1/40 487 406 49.7 41.4 5240 535 1275 130
Equivalent of 1/30 1/30 366 305 37.3 31.1 4750 485 1067 109
2.2kW 1/25 1/25 305 254 31.1 25.9 4750 485 1067 109
1/20 1/20 244 203 24.9 20.7 4750 485 1067 109
1/15 1/15 182 152 18.6 15.5 4410 450 1067 109
45 P.D71
1/12.5 19/235 152 126 15.5 12.9 4120 420 1040 106
1/10 1/10 122 102 12.4 10.4 3920 400 967 99
1/7.5 2/15 91 76 9.3 7.8 3530 360 900 92
1/5 1/5 61 51 6.2 5.2 3140 320 800 82

Note 1) The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.
2) Please be sure to read the remarks stated on〈page D53〉regarding the rotation method of output shaft.
3) The models marked with ＊ are limited torque type. Be sure to refer to the allowable torque in the performance table.

D67
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

S-Type Reducer
Frame No. 20
64 64
When the protective When the protective
cap is attached. cap is attached.
92 194.5 S
7 7 8
78 127
39 39 78.5 4.5
96 Flange surface Flange surface 48.5
24 24 38.5
48 68.5
13 13 Protective cap 6
F3S-20
φ20H8 φ20H8 (attachment)
48.5 5
38.5 φ110G7
φ53h7 φ53h7 10
φ29 φ29 97 22.8 φ160
4-φ10.5 4-φ8.6 38.5
48.5 φ130
φ11H7Depth33
(Standard surface)
2 2
4-M10×P1.5 4-M10×P1.5
4-M8×P1.25
37 37 Depth11 (Penetrated)

The values within parentheses are of those with brake motors.

Capacity Type Weight

0.1kW or equiv. F3SS-20-5∼60-010 4kg

Frame No. 25
Fig.1
79 79
When the protective When the protective 225.5
cap is attached. cap is attached. S
114 159 8
7 7 4.5
118 100 53.5 105.5
27 27 Flange surface Flange surface
64 50 50 43.5 95.5
14 14 Protective cap
F3S-25
8

φ25H8 φ25H8 (attachment)

53.5 5
φ66h7 φ66h7 43.5 φ110G7
10
φ39 φ39 107 28.3 φ160
4-φ10.5 4-φ8.6 43.5
53.5 φ130
φ11H7Depth33
(Standard surface)
2 2
4-M10×P1.5 4-M10×P1.5
39.5 39.5 4-M8×P1.25
Depth11 (Penetrated)

Fig.2 79 79
When the protective When the protective
cap is attached. cap is attached. 207
114 140 S
7 7 8
118 100 53.5 86.5
27 27 Flange surface Flange surface 4.5
64 50 50 43.5 76.5
14 14 Protective cap
8
F3S-25
φ25H8 φ25H8 (attachment)
53.5 5
43.5 φ110G7
φ66h7 φ66h7 10
φ39 φ39 107 28.3 φ160
4-φ10.5 43.5
φ130
53.5 φ11H7Depth33
(Standard surface)
2 2
4-M10×P1.5 4-M10×P1.5
4-M8×P1.25
Depth11 (Penetrated)
39.5 39.5

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number Weight

0.1kW or equiv. F3SS-25-80∼240-010 1 5.5kg

0.2kW or equiv. F3SS-25-5∼60-020 2 5.5kg

D68
 Diagrams
Outer Dimension
Frame No. 30
Fig.1
82 82
When the protective When the protective 246.5
cap is attached. cap is attached.
120 180
S
7 106 7 8
124 Flange surface Flange surface 58 122
33 58 33 4.5
53 53 46 110
17 17 Protective cap
F3S-30 8
(attachment)
φ30H8 φ30H8
58 5
46 φ110G7
φ75h7 φ75h7 10
φ44 φ44 116 33.3 φ160
4-φ12.5 4-φ10.6 46
φ130
58 φ11H7Depth33
(Standard surface)
2 2
4-M12×P1.75 4-M12×P1.75 4-M8×P1.25
45.5 45.5 Depth11 (Penetrated)

Fig.2 82 82
When the protective When the protective 235.5
cap is attached. cap is attached.
120 159 S
7 106 7 8
124 Flange surface Flange surface 58 101
33 58 33 4.5
53 53 48 91
17 17 Protective cap
F3S-30 8

φ30H8 φ30H8 (attachment)

58 5
48 φ110G7
φ75h7 φ75h7 16
φ44 φ44 116 33.3 φ160
4-φ10.5 4-φ8.6 48 φ130
58
φ14H7Depth36
(Standard surface)
2 2
4-M10×P1.5 40.5 40.5 4-M10×P1.5 4-M8×P1.25
Depth20

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number Weight

0.2kW or equiv. F3SS-30-80∼240-020 1 7kg
0.4kW or equiv. F3SS-30-5∼60-040 2 7kg

D69
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

S-Type Reducer
Frame No. 35
Fig.1 95 95 294
When the protective When the protective 222 S
cap is attached. cap is attached.
142 138 8
Flange surface Flange surface 68 154
38 66 38 7 124 7 4.5
54 140
20 20 Protective cap
F3S-35 62 62 10
(attachment)
φ35H8 φ35H8
68 5
54 φ110G7
φ85h7 φ85h7 16
φ49 φ49 136 38.3 φ160
4-φ16.5 54 φ130
68
φ14F7Depth36
(Standard surface)
2 2 4-M8×P1.25
4-M16×P2 4-M16×P2
58 58 Depth20

Fig.2
95 95
When the protective When the protective 265.5
cap is attached. cap is attached. 9 S
138 185
7 124 7 4.5
142 Flange surface Flange surface 68 117
38 66 38 62 62 56 105
20 20 Protective cap
F3S-35 10
(attachment)
φ35H8 φ35H8
68 6
56 φ130G7
φ85h7 φ85h7 21.5
φ49 φ49 136 38.3 φ200
4-φ12.5 4-φ10.6 56
68 φ165
φ19F7Depth42
(Standard surface)
2 2
4-M12×P1.75 48 4-M12×P1.75
48 4-M10×P1.5
Depth23 (Penetrated)

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number Weight

0.4kW or equiv. F3SS-35-80∼240-040 1 10.5kg
0.75kW or equiv. F3SS-35-5∼60-075 2 17.5kg

D70
 Diagrams
Outer Dimension
Frame No. 45
Fig.1 108 108
350 S
When the protective When the protective 9
cap is attached. cap is attached. 272
168 164 87 4.5
185
50 50 Flange surface 7 7 Flange surface
68 150 69 167
26 26
Protective cap 75 75 14
F3S-45
φ45H8 φ45H8 (attachment) 6
87
69 φ130G7
φ100h7 φ100h7 21.5
φ64 174 48.8 φ200
φ64
4-φ20.5 4-φ17.5 69 103 φ165
87 119.5
φ19F7Depth42
(Standard surface)
2 2 φ20 4-M10×P1.5
4-M20×P2.5 73 73 4-M20×P2.5
Depth23 (Penetrated)

Fig.2 108 108

When the protective When the protective 235
344
S
cap is attached. cap is attached.
168 164 87 12
148
50 50 Flange surface 7 7 Flange surface 4.5
68 150 73 134
26 26 Protective cap 75 75 14
F3S-45
φ45H8 φ45H8 (attachment)
87 8
73 φ130G7
φ100h7 φ100h7 27
φ64 174 48.8 φ200
φ64
73 98.5 φ165
4-φ16.5 4-φ14
87 115
φ24F7Depth52
(Standard surface)
2 2 φ20 4-M10×P1.5
4-M16×P2.0 63 63 4-M16×P2.0 Depth25

Fig.3
108 108
When the protective When the protective 356.5
cap is attached. cap is attached. S
164 235 16
7 150 7 5
168 87 148
50 50 Flange surface Flange surface
68 75 75 73 134
26 26 Protective cap 14
F3S-45 8
φ45H8 φ45H8 (attachment)
87
73
φ100h7 φ100h7 φ180G7 φ250
φ64 φ64 174 48.8 31
98.5 φ215
4-φ16.5 4-φ14 73
87 115
φ28F7Depth62
2 2 φ20 (Standard surface)
4-M16×P2.0 63 63 4-M16×P2.0 4-M12×P1.75
Depth16 (Penetrated)

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number Weight

0.75kW or equiv. F3SS-45-80∼240-075 1 17.5kg
1.5kW or equiv. F3SS-45-5∼60-150 2 19kg
2.2kW or equiv. F3SS-45-5∼30-220 3 20kg

D71
Diagrams
Outer Dimension
Concentric Hollow Shaft F3 Series (F3S Type)

S-Type Reducer
Frame No. 50
120 120 435.5
When the protective When the protective 304 S
cap is attached. cap is attached.
Flange surface Flange surface 16
172 168 118 186
55 55 7 7
62 154 102 170 5
29 29 Protective cap
F3S-5055 77 77 14
(attachment) 8
φ50H8 φ50H8 106
90
φ110h7 φ74 φ250
φ74φ110h7 212 53.8 φ180G7 31
90 121
4-φ16.5 4-φ14 φ215
106 137.3
φ28F7Depth62
2 2 φ20 (Standard surface)
4-M12×P1.75
4-M16×P2.0 4-M16×P2.0 3-M4 Depth16 (Penetrated)
59 59
The values within parentheses are of those with brake motors.

Capacity Type Weight

2.2kW or equiv. F3SS-50-40∼60-220 29kg

Frame No. 55
Fig.1 143 143 434.5
When the protective When the protective S
cap is attached. cap is attached. 336
12
220 Flange surface 216 Flange surface 116 220
61 61 8 8 4.5
98 200 94 198
32 32 Protective cap 100 100 16
F3S-5055
(attachment)
φ55H8 φ55H8 130 8
108 27
φ120h7 φ120h7 φ130G7 φ200
φ79 φ79 260 59.3 φ165
4-φ20.5 108 149
4-φ17.5
130 169.5
φ24F7Depth52
(Standard surface)
4-M10×P1.5
2 2 φ25 Depth25
4-M20×P2.5 71.5 71.5 4-M20×P2.5 3-M4

Fig.2 143 143 447

16 S
When the protective When the protective 336
cap is attached. cap is attached.
216 5
220 Flange surface Flange surface 116 220
61 61 8 8
98 200 94 198
32 32 Protective cap 100 100 16
F3S-5055
(attachment)
8
φ55H8 φ55H8 130
108
φ120h7φ79 φ120h7
φ79 260 59.3 φ180G7 φ250 31

4-φ20.5 4-φ17.5
108 149 φ215
130 169.5

φ28F7Depth62
(Standard surface)
2 2 φ25 4-M12×P1.75
4-M20×P2.5 71.5 71.5 4-M20×P2.5 3-M4 Depth16 (Penetrated)

The values within parentheses are of those with brake motors.

Capacity Type Fig. Number Weight

1.5kW or equiv. F3SS-55-80∼240-150 1 75kg
2.2kW or equiv. F3SS-55-80∼120-220 2 76kg

D72
Outer Dimension

D73
Diagrams
D74