70 Rifle Shotgun Sights P278 293

UNIVERSAL HERITAGE ARMS REMINGTON 600 HIVIZ
VENTILATED RIB FIBER OPTIC RIFLE SIGHT

rifle/shotgun sights
REAR SIGHT ELEVATOR KIT SIGHT DOVETAIL SLOT BLANK

Eye Grabbing Dot For Fast Target Acquisition
24 Of The Most Popular Elevators Fill Empty Dovetails For A Clean,
Replace Soft Factory Plastic With Steel Or Aluminum
Finished Appearance Front sight: six, interchangeable, fiber
Fits and looks like the original rib, with greatly improved strength. optic rods offer a choice to match nearly all
Universal Elevator Kit contains 24 el- The perfect cure when removing Fully finished for easy installation; exactly replaces the now obsolete shooting and light conditions. The glowing,
evators, covering the most common ones factory sights or restoring antiques to and unavailable factory, plastic rib. a b orange and green light pipes provide great
you get calls for. Included are six double- original space. Mild steel blanks ma- SPECS: Steel, blue, matte finish. Aluminum, black, anodized, matte, finish. contrast against dark target backgrounds. a b
step short elevators; 6 double-step long chined slightly oversize for a close, 17 /2" (44.5cm) long. Uses existing screws.
1
SPECS: Steel, black, matte finish. .315" (8mm), .380" (9.7mm), .420"
elevators; 6 standard width (.080") sin- perfectly blended fit in barrel sight (10.7mm), .500" (12.7mm) height. Standard /8" dovetail. Light pipes: 1/16"
#429-000-001AT Steel Rem. 600 Vent Rib, 3
gle-step elevators and six special narrow dovetails. Easy to shape, file and blue. a
b (1.5mm), 3/32" (2.4mm), 1/8" (3.1mm), diameter. .720" (18m) long.
9B111J25�� $ 124.99
width (.050") singlestep elevators. Don’t SPECS: Mild steel, blued finish. 12" (30.4cm) long, fits nominal 3/8"
pass this kit up - a real money maker and (9.52mm) x 60° dovetails. #429-000-002AT Alum. Rem. 600 Vent Rib, #638-115-000AT .315" Fiber Optic Sight,
lifesaver for any gun shop. ab 9B94I29�� 109.95 8C26B06�� $ 28.99
#080-770-375AT Dovetail Slot Blanks, 8K12K94�� $ 15.75
SPECS: Length and width varies. Blued steel. #638-000-013AT .380" Fiber Optic Sight,
8C26Q06 �� 28.99
#638-000-014AT .420" Fiber Optic Sight,
STOCK # QUANTITY FITS MARBLE OVERSIZE DOVETAIL FRONT SIGHT 8C26I06�� 28.99
#080-506-001AT 6 .080" wide single-step #638-000-015AT .500" Fiber Optic Sight,
#080-506-002AT 6 .050" wide single-step NO. 87 SLOT BLANK Plenty of extra meat and blade height 8C26B06�� 28.99
#080-506-003AT 6 short double-step to finish into the exact front sight you need.
Ready-Made To Fill Sight Dovetails Oversize 60° x .395" dovetail base; avail-
#080-506-004AT 6 long double-step
Polished blue or matte stainless steel, flat top blank fills empty able in two blade widths for short- and
— Advise # — Sight Elevator Refill, 8K8A81 ��$ 10.99 sight dovetails. a
b long-barrel applications. a b
#080-506-000AT Rear Sight Elevator Kit, 8K26A55��$ 31.99 SPECS: Carbon steel, blued, polished, or stainless steel, matte finish. Fits SPECS: Cast steel, in-the-white. Dovetail - 60° KENSIGHT AK-47
nominal /8" (9.5mm), 60° dovetails. Approximately 5/8" (15.8mm) wide overall.
3 x .395" x .100". Blade - .590" (15mm) high, .065"
#579-087-100AT No. 87 Dovetail Slot Blank, Blued,
(1.6mm) or .100" (2.5mm) wide. ADJUSTABLE NIGHT SIGHTS
9G5L23 ��$ 5.99 #011-001-065AT .065" Oversize Front Sight, 1A8P99�� $ 8.99
Genuine Trijicon Lamps For Fast Sight
#579-000-014AT No. 87 Dovetail Slot Blank, SS, - 5 or More - .065" Oversize Front Sight, 1A6P32�� 6.32
Acquistion In Low Light
9G7P63�� 8.99 #011-001-100AT .100" Oversize Front Sight, 1A8J99�� 8.99
- 5 or More - .100" Oversize Front Sight, 1A6P32�� 6.32 Drop-in sights with genuine, Trijicon
lamps feature polished quartz lenses,
DECORATIVE SLOT BLANK which make these sights the perfect up-
grade for AK-47 rifles and variants used
Finely Crafted, Custom Pattern Looks
WILLIAMS during low light periods. Sight bodies are
Good On Modern & Classic Rifles ALUMINUM SLOT BLANK EDM machined from rugged, 4140 steel, then heat-treated to Rc
38-40 and vacuum tempered to retain the extra-tight tolerances.
Not just another slot-filler, but an at-
tractive, all steel blank that hides the un-
Fills Empty Sight Dovetail
Without Fitting
MAUSER FRONT SIGHT BLANK Rear sight fits AK-47, Norinco 56S, Mak-90, and Polytech AKS vari-
ants. Fine line serrations on the rear blade surface help cut glare
sightly appearance of an empty sight Ready To Fit & Shape For Custom Applications; in bright light conditions. Features click adjustments for windage
dovetail on your favorite sporter rifle. Stylish, diamond shape with Machined, aluminum, slot blank and uses standard issue, tangent rear sight increments for eleva-
Fits The Unique, Metric Dovetail
decorative, milled edges blends naturally into the barrel contour drops-in easily to fill the empty sight tion adjustments. Robust, Front post has M6 x.075" tpi thread to
for a truly finished look. Polished and blued with enough room for dovetail for a clean-looking barrel. 5-40 .375" high blade lets you zero the military replace standard issue front sight post on all AK variants with a front
custom engraving, if so desired. Fits standard, .375" x 60° dovetails set screw locks blank in place and makes removal easy. Black anod- Mausers, like the Model 96 Swede and 98, and sight base.
without fitting. ab ized to blend well with most blue finishes. a b other rifles with a metric dovetail, to point of SPECS: 4140 steel, blue, matte finish. .076" (1.9mm) diameter Tritium lamps.
SPECS: Steel, polished blue finish. 1" (2.5cm) long x 9/16" (1.4cm) wide. Fits SPECS: Aluminum, black anodized. 3/8" (9.5mm) x 5/8" (15.9mm). Fits stan- aim. Square post blade gives an easy-to-see, #100-002-630AT Rear AK-47 Night Sight,
.375" x 60° dovetail. dard, .375" (9.5mm) x 60° dovetails. well defined sight picture with the original, is- 5A123E79�� $ 147.95
#080-000-193AT Decorative Slot Blank, 8K15J57 �� $ 17.99 #962-000-034AT Aluminum Slot Blank, 2F5L32��$ 6.95 sue rear sights. Plenty of extra material so you #100-002-631AT Front AK-47 Night Sight,
can file and shape the blade to original con- 5A41H65�� 44.99
tour or a custom shape - and just the right height. 5.26mm dovetail
fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles
with military sight base. ab
SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high
FRONT SIGHT ELEVATION CORRECTION CHART above 81° x .207" x .062" dovetail. May require minor fitting.
#078-050-000AT Mauser Front Sight Blank, 8G12C71��$ 14.99 HIVIZ AK-47/74/AKM
How To Use Table Below - Suppose a rifle, having a sighting radius of 24" between front sight and receiver sight, shoots 6" high
at 100 yards, even with the rear sight adjusted as low as possible. Remove front sight and measure overall height, preferably with a FIBER OPTIC FRONT SIGHT
micrometer. This might be .410", such as a Marble No. 41N. Reference to columns for 24" and 6" on table below will show a necessary
correction of .040". This would mean a new, higher front sight (with an overall height of .410" plus .040" for a corrected height of .450")
Bright Fiber Optic For Easy Aiming
such as a Marble No. 45N, should be installed. GALAZAN WINCHESTER M70/94 Replacement front sight post has a
Sighting in should be done with a benchrest or prone with a sand bag or other rest for the rifle. Do not put rifle barrel or forearm
directly on solid surface, but put the back of your hand or wrist on the rest and hold forearm of the rifle securely in your hand with ap-
FRONT SIGHT HOOD light-gathering fiber optic rod to pro-
duce a bright dot that’s easy to acquire
proximately the same tightness of grip you would use when shooting at running game. If the forearm or barrel is rested directly on the Front Blade Protection & Enhanced in a broad range of light conditions. Eas-
sand bag or rest, the rifle will shoot higher than when held firmly while shooting at game as more “muzzle flip” will occur. Sight Picture ily replaces the post on most AK-47, AK-
AMOUNT OF ADJUSTMENT NECESSARY TO CORRECT ERROR 74 and AKM rifle sights, no gunsmithing
Protects the front sight from damage caused by normal field required. Unique, U-shaped rod gathers
Distance Between Front & Rear Sights
use. Open front design allows plenty of light to reach the front blade far more light than a standard straight
14" 15" 16" 17" 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" 31" 32" 33" 34" and provide an enhanced sight picture. Spring steel construction rod—perfect for low-light situations.
Amount 1" .0038 .0041 .0044 .0047 .0050 .0053 .0055 .0058 .0061 .0064 .0066 .0069 .0072 .0074 .0077 .0080 .0082 .0085 .0088 .0091 .0093 for durability. Available for Model 94 carbine with sight ramp and Comes with two green and two red in-
of Error 2" .0078 .0083 .0089 .0094 .0100 .0105 .0111 .0116 .0122 .0127 .0133 .0138 .0144 .0149 .0155 .0160 .0156 .0171 .0177 .0182 .0188 pre-64 Model 70. a b terchangeable rods that can be changed quickly using the included
At SPECS: Steel, blue, matte finish. 1" (2.5cm) long x 1/2" (12.7mm) wide. tool, so you can customize the sight picture or replace a damaged
3" .0117 .0125 .0133 .0142 .0150 .0159 .0167 .0175 .0184 .0192 .0201 .0209 .0217 .0226 .0234 .0243 .0251 .0259 .0268 .0276 .0285 Model 94 - 1/2" high (12.7mm). Model 70 - 11/16" (16.7mm) high.
100 Yards 4" rod quickly. Elevation adjustable. a b
.0155 .0167 .0178 .0189 .0200 .0211 .0222 .0234 .0244 .0255 .0266 .0278 .0289 .0300 .0311 .0322 .0333 .0344 .0355 .0366 .0377 #344-000-007AT Model 94 Carbine w/Ramp Sight Hood, SPECS: Black steel post with 2 green and 2 red fiber optic rods. Includes
Given in
5" .0194 .0208 .0222 .0236 .0250 .0264 .0278 .0292 .0306 .0319 .0333 .0347 .0361 .0375 .0389 .0403 .0417 .0431 .0445 .0458 .0472 4D5C34��$ 5.99 detent pin, sight wrench, fiber optic rod removal tool, carrying case, and
Inches
6" .0233 .0250 .0267 .0283 .0300 .0317 .0333 .0350 .0367 .0384 .0400 .0417 .0434 .0450 .0467 .0484 .0500 .05175 .0534 .0551 .0567 #344-000-008AT Pre-64 Model 70 Sight Hood, instructions.
4D5J34 �� 5.99 #638-000-190AT AK-47 FO Front Sight, 8C23D82�� $ 24.99
SATISFACTION GUARANTEED
PAGE 278 SINCE 1939 Office/Tech: 641-623-5401
MARBLE #95 FOLDING SPORTING MARBLE BULLSEYE REAR SIGHT
REAR SIGHT
CALCULATING SIGHT HEIGHTS
Traditional Appearance; Determining proper sight height is not difficult. Just remember the front and rear sights must be the same height above
Folds Down For Storage Or Carry the center of the barrel. And, when you make your measurements, you MUST use a caliper or micrometer. A few thousandths
Folding design helps prevent accidental damage to the rear leaf. can have a substantial effect, and this is no place for a tape measure or eyeballing!
Leaf easily flips down, out of the way, when your favorite lever or
Short
single-shot rifle is stored or carried. Long shank, barrel-mounted
sight is fully adjustable using the center plate and center plate lock
Short B D
screw—no need for a separate elevator. Flat top leaf with white dia- Fixed
mond sight insert helps improve sight acquisition and alignment.
For Fast Target Acquisition & Improved Accuracy
A C
Screw and drift adjustable for windage. Fits nominal 3/8" dovetail.
May require minor fitting. a b Barrel-mounted, dovetail Bullseye sight gets you on target fast
SPECS: Steel, blue, polished finish. Leaf - .300" (7.8mm) high, .630" with perfect alignment for improved accuracy. Steel, double-ring
(15.8mm) wide. Fits nominal 3/8" (9.5mm) dovetail. peep design ensures consistent sight alignment and helps improve
#579-000-082AT #95 Folding Rear Sight, 9G23P25 �� $ 27.99 shooting form. The moment the rear sight is misaligned, the front
sight drifts out of the center ring, telling the shooter to re-align. A = Distance from centerline to top of barrel at rear B = Rear sight height.
Replaces standard 3/8" dovetail rear sights on many rifles. For use Instructional video sight. Barrel outside diameter divided by 2.
with bead-type or traditional blade front sights. Adjustable models available at
MARBLE FOLDING LEAF REAR SIGHT are available with a short or long base and six-position step elevator
that’s adjustable in .030" increments for precise elevation settings.
Brownells.com C=D
istance from centerline to top of barrel at front D = Front sight height.
sight. Barrel outside diameter divided by 2.
Perfect “Back-Ups” For Scoped Guns Fixed model features the same Bullseye peep design but without the
Folds down when not in use. Strong spring secures sight in “up” extended base and is not elevation adjustable. All models are drift
or “down” position. The reversible notch piece gives choice of “U” adjustable for windage. May require minor fitting. a b DETERMINING FRONT SIGHT HEIGHT blade with a Williams 7/16" (.3445") ramp for a total
or “V” notch. Styles and heights available to fit most standard rear SPECS: Steel, blue, polished finish. Fits nominal 3/8" (9.5mm) dovetail. Out- height of .5945".
sight dovetails. The chart shows the overall sight height for those side Ring O.D. - 9/16" (1.4cm). Inside Ring I.D. - .15" (3.8mm). Adjustable - When you have a rear sight and need to find the correct
sights below. .338"-.535" (8.6mm - 13.5mm) elevation adjustment in six, .030" (.76mm) front sight height, the formula is (A + B) – C = D. With the DETERMINING REAR SIGHT HEIGHT
increments. OAL from rear of dovetail - Long: 21/2" (6.3cm). Short - 11/2" rear sight in place:
69 & 69W - Height, .370" (9.4mm) to .480" (12.2mm). (3.8cm). Fixed - .438 (11.1mm) fixed height from bottom of dovetail to When you have a front sight and need to find the cor-
69H & 69WH - Height, .470" (11.9mm) to .600" (15.2mm). center of inside ring. 7/16" (1.1mm) long. 1) Measure barrel diameter at the location of the rear rect rear sight height, the formula is (C + D) – A = B. With
#579-000-163AT Short Adj. Bullseye Sight, 9G15G67�� $ 16.99 sight and divide by 2 to get Dimension A. the front sight in place:
69EH & 69WEH - Height, .520" (13.2mm) to .640" (16.3mm).
#579-000-164AT Long Adj. Bullseye Sight, 9G15A67�� 16.99 2) If the rear sight is adjustable, set the blade in the
No. 69EH and No. 69H are .096" (2.4mm) #579-000-165AT Fixed Bullseye Sight, 9G15J67�� 16.99
1) Measure barrel diameter at the projected rear sight
MIDDLE of its travel. Then measure the total rear
higher than standard folding leaf; EH model ad- sight height from the top of the barrel, to the top location and divide by 2 to get Dimension A.
justs for elevation from .538" to .657". Blade & of the sight blade to get Dimension B. For example,
Screw replacement parts available to maintain 2) Measure the barrel diameter at the location of the
your existing, folding-leaf sights. a b
on a WGOS with a ¼" blade, the mid-setting is .462" front sight and divide by 2 to get Dimension C.
high, so Dimension B would be .462".
#579-069-000AT No. 69 Flat Top, 9G16H75�� $ 19.99 3) Measure the front sight height from the top of the
#579-069-001AT No. 69H Flat Top, 9G16N74�� 19.99 MARBLE SPORTING REAR SIGHT 3) Measure the barrel diameter at the projected loca- barrel to the top of the sight blade to get Dimen-
#579-000-071AT No. 69EH Flat Top, 9G17C00�� 19.99 tion of the front sight and divide by 2 to get Dimen- sion D.
Traditional Sights Fit Many Brands sion C.
#579-000-073AT Blade & Screw, 9G1N41�� 1.99
4) Add Dimension C + Dimension D, then subtract Di-
4) Add Dimension A + Dimension B, then subtract Di-
mension A from the total to get Dimension D, the
FLAT TOP FOLDING LEAF SIGHT WITH WINDAGE mension C from the total to get Dimension D, the
required height of the rear sight above the top of
69WEH 69W required height of the front sight above the top of
NO.69W - “W” indicates Windage the barrel. the barrel.
and can be used wherever No.
69 sights are indicated in Marble Flattop Semi-Buckhorn Full-Buckhorn 5) Choose the tallest ramp and shortest sight blade 5) Choose a rear base and sight combination with a
sight chart. combination that’s closest to the results in Step 4. In total height closest to D. If the rear sight is adjust-
Sporting Rear Sight Base with three styles of Uprights. Perfect the example below, the required front sight height is able, the total height should match Dimension D
NO.69WH - “H” indicates “high” as replacement sights for customizing the sight picture, or adding .587". A Williams 3⁄8" (.282" high) ramp and a Marble when the sight is positioned in the MIDDLE of the
and can be used wherever No. adjustment to fixed sight guns. Fits standard 3/8" dovetails; available #31MR sight (.312" high) will provide a combined adjustment area.
69H is indicated. “H” is .096" (2.4mm) higher. No.69WEH - “EH” with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. a b
indicates “extra high” and is elevation adjustable .538" to .657".
height of .594". Or combine a Williams .250" high
SPECS: Dovetail Model - Total heights: #63 and 64, .275" (7.1mm) - .505"
#579-069-002AT No. 69W Marble’s Flat Top, Windage, (12.4mm); #63H, 64H, 66H and 67H, .350" (9.0mm) - .630 (16.0mm); #65,
9G17Q66��$ 21.99 66, 67 and 68, .300" (7.6mm) -.510" (12.9mm). EXAMPLE WITH NUMBERS D = .587"
#579-069-003AT No. 69WH Marble’s Flat Top, Windage,
9G17B67 �� 21.99 STOCK # STYLE SHANK MODEL
#579-000-072AT No. 69WEH Marble’s Flat Top, FLAT TOP SIGHTS B = .462"
Windage, 9G17G66�� 21.99 #579-063-001AT Dovetail Short 63
#579-063-003AT Dovetail Short 63H A = .475" C = .350"
#579-066-001AT Dovetail Long 66
#579-066-003AT Dovetail Long 66H
N.E.C.G. EXPRESS SIGHT SEMI-BUCKHORN SIGHTS
Fast Sight Picture, Elegant Looks #579-064-001AT Dovetail Short 64
.700"
Classically styled, all-steel sight with one #579-064-003AT Dovetail Short 64H .950"
fixed, plus single or double flip-up leaves give #579-067-001AT Dovetail Long 67
fast pickup and clear sight picture for hunting in thick cover. Install #579-067-003AT Dovetail Long 67H FRONT SIGHT CALCULATION: REAR SIGHT CALCULATION:
directly on a rib. FULL-BUCKHORN SIGHTS
SPECS: Machined steel, in-the-white. Height from top of base radius to #579-065-001AT Dovetail Short 65 (A + B) - C = D (C + D) - A = B
bottom of dovetail is .250" (6.3mm). Total sight height to top of middle
#579-068-001AT Dovetail Long 68
leaf is .755". 1-Leaf Sight: .98" (25mm) long, 2-Leaf Sight: 1.4" (3.5cm) (.475 + .462) - .350 = .587 (.350 + .587) - .475 = .462
long, .7" (17mm) wide. — Advise # — Flat Top Rear, 9G16G75��$ 19.99
#661-000-028AT 1-Leaf Express Sight, 1F75F00�� $ 80.00 — Advise # — Semi-Buckhorn Rear, 9G16J75 �� 19.99 .937 - .350 = .587" .937 - .475 = .462"
#661-000-029AT 2-Leaf Express Sight, 1F86J49�� 90.00 — Advise # — Full-Buckhorn Rear, 9G16N75�� 19.99
order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 279
MARBLE DOVETAIL FRONT RAMP MARBLE UNI-RAMP FRONT SIGHT
Graceful & Attractive For Rifles & MARBLE’S SIGHT SELECTION CHART
Solid Steel Body For Strength;
Muzzleloaders Long Rod Picks Up Lots Of Light MARBLE SPORTING REAR LEAF REAR FRONT
Solid steel ramps for custom fitting fiber optic, ivory and brass MOD.
Glowing, 3/4" long, fiber optic rod WINCHESTER RIFLES FLAT TOP SEMI-BUCK FULL BUCK FLAT NO.
bead sight blades. Available in two heights and four barrel contours
gives excellent visibility. Quickly re- 1892 Rep. .25-20, .32-20, .38-40, .44-40 66 67 68 69 31W
to fit a wide selection of current and older production rifles. Ramp
places screw-held front sights on rifles, shotguns and muzzleload- 1892 Carb. .25-20, .32-20, .38-40, .44-40 63 64 65 69 -
attaches to barrel with a single screw under the sight body and sol- 1892 Carb. with ramp 63 64 65 69 -
ers. Two blade heights and two barrel contours to fit a variety of
der; flat base is drilled for two mounting screws. a b 1894 Rep. .32-40, .38-55 66 67 68 69 31W
applications. ab
SPECS: Steel, blue, polished finish. .340" (8.6mm) wide. 2" (5cm) long. 1894 Rep. .25-35, .30-30, .32 Spec. 66 67 68 69 45W
SPECS: Steel, blue, polished finish. 2" (5cm) long. Height - .405" (10.3mm)
Height is from the top of barrel to the bottom of dovetail. 1894 with ramp .25-35. .30-30, .32 Spec. 66 67 68 69 -
or .470" (11.9mm). Barrel Contour - 5/8", 3/4", 7/8" diameter. Optic rod 3/4" 1894 Carb. .32-40, .38-55 63 64 65 69 -
STOCK # BL DIA. HGT STOCK # BL DIA. HGT (19mm) long, orange. 1894 Carb. .25-35, .30-30, .32 Spec. 63 64 65 69 894
#579-000-034AT .625 .100" #579-000-038AT .625 .225" 1894 Carb. with ramp 63 64 65 69 -
STOCK # HEIGHT CONTOUR PRICE
Mod. 61 Pump Action .22 Cal. 63 64 65 69 34W
#579-000-035AT .6875 .100" #579-000-039AT .6875 .225" #579-000-016AT .405" 5
/8" 9G15Q00 $ 16.99 Mod. 62 Rep. Rifle .22 Cal. 63 64 65 69 34W
#579-000-036AT .875 .100" #579-000-040AT .875 .225" #579-000-017AT .470" 5
/8" 9G15G00 $ 16.99 Mod. 63 .22 L. R. Auto 63 64 65 69 34W
#579-000-041AT Flat .225" Mod. 64 .25-35, .30-30, .32 Spec. 66 67 68 69 -
#579-000-020AT .405" 7
/8" 9G15B00 $ 16.99
Mod. 65 .25-20, 32 66 67 68 69 -
— Advise # — Dovetail Front Ramp, 9G9A74�� $ 11.99 #579-000-021AT .470" 7
/8" 9G15K00 $ 16.99 Mod. 67 Single Shot .22 Cal. 63 64 65 69 34W
Mod. 68 .22 Cal. 63 64 65 69 45W
Mod. 69 .22 Cal. 63 64 65 69 45W
CONTOUR FRONT SIGHT

Mod. 70 All Cal. 66 67 68 69 -
MARBLE Mod. 71 .348 Cal. 66 67 68 69 -
The Standard In The Industry Mod. 77 .22 Cal. S. L. Rifle 63 64 65 69 41M
Mod. 88 .308 Cal. L. A. Rifle 66 67 68 69 -
Precision-made sights for rifles, both with Mod. 100 63H 64H 65 69H 26MR
and without ramp bases. The blade is grace-
fullly contoured, sloping toward the front. MARLIN RIFLES
Made of steel and nicely blued to look good Mod. 39, A Rep. Rifles 63 64 65 69 37M
Ramp Front, Gold Glow Sight Glow Sight Mod. 39 A with Ramp 63 64 65 69 -
on any gun. RAMP MOUNTED FRONT SIGHT:
“MR”features a straight-sided base for guns having a ramp base on the barrel. All “MR” sights have a .340" (8.6mm) wide base. The BARREL Mod. 56 22 Cal. L. A. 63 64 65 69 -
Mod. 36, 336 rifle and carbines 66 67 68 69H 45W
MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. “W” sights have a 17/32"
Mod. 336, SC .35 Cal. 66 67 68 69H 37M
(13.5mm) wide base. Ramped and Barrel front sights are available with three beads, Pope’s Island Gold, flat faced gold available in 1/16"
(1.6mm) or 3/32" (2.4mm) diameter. Ivory, flat faced white polymer in 1/16" (1.6mm) or 3/32" (2.4mm) diameter. GLOW SIGHTS: Two colors -
REMINGTON RIFLES
Orange or Green .060" dia. optic rod. RAMP MOUNTED - .340 wide base. BARREL MOUNTED - 17/32" wide base. a b
Mod. 12 Rep. Rifle .22 Cal 63 64 65 69 31W
SPECS: Steel, blue, polished finish. .620" (15mm) long. Mod. 121 Fieldmaster .22 Cal. 63 64 65 69 37M
— Advise # — White or Gold Sight, 9G11C17 �� $ 13.99 Mod. 121 Fieldmaster (1936 Series) .22 Cal. 63M 64M - - 37M
— Advise # — Glow Sight, 9G13F99�� 17.99 Mod. 141 Gamemaster .30, .32, .35 66H 64 65 69 31M
Mod. 241 Speedmaster .22 Auto-Ldg. 63M 64 65 69 37W
RAMP MOUNTED FRONT SIGHTS glow SIGHTS Mod. 33, 34, 41, .22 Cal. Single Shot 63 64 65 69 31W
HGT MRBL # STK# 1/16" GOLD STK# 1/16" IVORY STK# 3/32" GOLD STK# 3/32" IVORY STK# GREEN STK# ORANGE Mod. 341 Speedmaster .22 Cal. 63 67H - 68H 31W
Mod. 510, 513T 63 64 65 69 37M
.260 26-MR #579-502-621AT #579-502-622AT #579-602-621AT #579-602-622AT NA NA Mod. 511, 512, 550, 552 63 64 65 69 37M
.290 29-MR #579-502-921AT #579-502-922AT #579-602-921AT #579-602-922AT NA NA Mod. 514 63M 64 65 69 37M
Mod. 521T .22 Cal 63 64 65 69 45W
.312 31-MR #579-503-121AT #579-503-122AT #579-603-121AT #579-603-122AT #579-603-126AT #579-603-125AT
Mod. 572 .22 Cal. 63M 64M - 69 37M
.343 34-MR #579-503-421AT #579-503-422AT #579-603-421AT #579-603-422AT #579-603-426AT #579-603-425AT Mod. 700 63 64 - 69 41MR
.375 37-MR #579-503-721AT #579-503-722AT #579-603-721AT #579-603-722AT #579-603-726AT #579-603-725AT Mod. 721, 722 All Cal. 63H 64H - 69H 34W
Mod. 760 All Cal. 66 67 68 69H -
.410 41-MR #579-504-121AT #579-504-122AT #579-604-121AT #579-604-122AT #579-604-126AT #579-604-125AT Mod. 740 .22 Cal. 63H 64H - 69H 37M
.450 45-MR #579-504-521AT #579-504-522AT #579-604-521AT #579-604-522AT #579-604-526AT #579-604-525AT Mod. 740 ADL 63H 64H - 69H -
.500 50-MR #579-505-021AT #579-505-023AT #579-605-021AT #579-605-022AT #579-605-026AT #579-605-025AT Mod. 742 63H 64H 65 69 41
Mod. 760 .22 Cal. 66H 67H 65 69 41
.538 53-MR #579-505-321AT #579-505-322AT #579-605-321AT #579-605-322AT NA NA Mod. 725 66 67 - 69 31M
BARREL MOUNTED FRONT SIGHTS glow SIGHTS On late Model 700, 721, 722, 725, 740, 760 No. 25 Ramp
Sight Base is required to use Marble Open Rear Sights (not stocked)
HGT MRBL # STK# 1/16" GOLD STK# 1/16" IVORY STK# 3/32" GOLD STK# 3/32" IVORY STK# GREEN STK# ORANGE
.343 34-W #579-103-431AT #579-103-432AT #579-203-431AT #579-203-432AT #579-203-436AT #579-203-435AT SAVAGE RIFLES
Mod. 340, .30-30 Cal. for Gun with Slot in Ramp 63H 64H - 69H -
.375 37-W #579-103-731AT #579-103-732AT #579-203-731AT #579-203-732AT #579-203-736AT #579-203-735AT Mod. 342 .22 Hornet 63H 64H - 69H -
.410 41-W #579-104-131AT #579-104-132AT #579-204-131AT #579-204-132AT #579-204-136AT #579-204-135AT Mod. 1899 E. F. G. 66 67 68 69 -
.450 45-W #579-104-531AT #579-104-532AT #579-204-531AT #579-204-532AT #579-204-536AT #579-204-535AT Mod. 99R .250 and .300 Cal. 66 67 68 69 -
Types A, B, C, D & H. Serial No. below 297,000 in Cal. .22 HP. .25-35, .30-30, .303-.300 - - - 69H 45W
.500 50-W #579-105-031AT #579-105-032AT #579-205-031AT #579-205-032AT #579-205-036AT #579-205-035AT For Featherweight
.538 53-W #579-105-331AT #579-105-332AT #579-205-331AT #579-205-332AT NA NA Mod. 99T .30-30 & .303 Cal. 63 64 65 69H -
.570 57-W #579-105-731AT #579-105-732AT #579-205-731AT #579-205-732AT NA NA 99F, G & EG .22 Cal. HP; 99RS .250 63 64 65 69H 34W
99F, G & K .30-30 & .303; Carbines .250, .30-30, .303 66 67 68 69H 37M
.312 31-W NA #579-103-132AT #579-203-131AT #579-203-132AT #579-203-136AT #579-203-135AT 99T .22 HP, .250, .300, 99A, E. F. G. EG.K & R .250, 99G, K, RS .300 66 67 68 69H 45W
Mod. 110MC-MCL 66H 67H - 69H -
Mod. 99DL .300 Sav. 66 67 68 69H 26MR
MARBLE Chart To Determine Overall Sight/Ramp Heights Mod. 99E .243, .300 Sav. and .308 66 67 68 69H 29MR
Sight Total Sight Total Sight Total Sight Total Sight Total STEVENS RIFLES
No. Ramp Height No. Ramp Height No. Ramp Height No. Ramp Height No. Ramp Height Mod. 87 63H 67H 68 69H 37W
26MR 3⁄
16" .3545 26MR 3⁄
8" .5420 41MR 5⁄
16" .6295 37MR 7⁄
16" .7195 34MR 9⁄16" .8125 Mod. 87K 63H 64H 65 69H 37W
29MR 3⁄
16" .3845 45MR 3⁄
16" .5445 53MR 3⁄
16" .6325 26MR 9⁄
16" .7295 53MR 3⁄8" .8200 BROWNING
22 Automatic late models - - - - 37M
31MR 3⁄
16" .4065 34MR 5⁄
16" .5625 29MR 7⁄
16" .6345 45MR 3⁄
8" .7320 50MR 7⁄16" .8445
22 Automatic 63 64 65 69 -
34MR 3⁄
16" .4375 29MR 3⁄
8" .5720 31MR 7⁄
16" .6565 41MR 7⁄
16" .7545 37MR 9⁄16" .8445 Mod. .30, .06 - - - - -
37MR 3⁄
16" .4695 31MR 3⁄
8" .5940 37MR 3⁄
8" .6570 53MR 5⁄
16" .7575 41MR 9⁄
16" .8795 STURM-RUGER RIFLES
26MR 5⁄
16" .4795 50MR 3⁄
16" .5945 45MR 5⁄
16" .6695 29MR 9⁄
16" .7595 53MR 7⁄16" .8825 Mod. 44 Mag. - - - 69H 45MR
Mod. 10/22 - - - 69 41MR
41MR 3⁄
16" .5045 37MR 5⁄
16" .5945 34MR 7⁄
16" .6875 31MR 9⁄
16" .7815 45MR 9⁄16" .9195
- No sight available.
29MR 5⁄
16" .5095 26MR 7⁄
16" .6045 41MR 3⁄
8" .6920 50MR 3⁄
8" .7320 50MR 9⁄16" .9695 † Used with 9⁄16" Ramp.
31MR ‡ Used with 5⁄16" Ramp.
16" .5315 34MR 8" .6250 50MR 16" .7195 45MR 16" .7945
5⁄ 3⁄ 5⁄ 7⁄
MEPROLIGHT® REMINGTON RIFLE SIGHT FULTON ARMORY M1/M14/M1A N.E.C.G. RUGER® LIPSKI
REAR SIGHT ELEVATION KNOB RIFLE FRONT SIGHTS COMPETITION REAR SIGHT BASE
All Steel Replacement Sights With
Excellent Low-Light Visibility Replaces Worn-Out Part; High-Visibility White Bead Or Easy Rear Aperture Sight Mounting
Easy-to-install, adjustable re- Calibrated In Yards Fiber Optic Rod Speeds Target For Target Rifles
placement sights equipped with Mep- Acquisition Attach receiver-style target sights to
Steel rear sight elevation knob
rolight’s standard, tritium insert with visibility guaranteed for five your favorite rifle without drilling and tap-
is drop-in ready to replace a worn No-gunsmithing replacement front sights for Ruger No. 1® and
years. All sights fit in the factory sight bodies. No alteration to the ping. AR-15 model clamps to flat top rails;
out knob on your Garand. USGI-Spec, calibrated in yards, with one M77® rifles feature sturdy, fully-machined bodies with a high-visi-
gun. Fits Remington model 4, 6, 7400, 7600, 870, 1100 and 11-87 WR fits Weaver-style bases; WR-MJT accepts Lyman MJT and Wil-
minute of elevation at 100 yards per click, just like the original. Can bility white bead or bright fiber optic rod for fast sight acquisition.
equipped with adjustable rifle sights. liams Target Foolproof sights. Once sight is mounted to base, the
also be used to replace the elevation knob on an M14/M1A to change Makes your front sight stand out even when aiming against dark
SPECS: Steel sight body, blued. Tritium inserts. Includes front and rear sight. entire unit may be removed and re-installed without loss of zero.
rear sight calibration from meters to yards. a b foliage or muted backgrounds. Beautifully blued sight body blends
#387-310-460AT Rem. 870, 1100, 11-87 Night Sight, SPECS: Steel, Parkerized, matte black. Calibrated in yards. Fits M1 Garand Pre-drilled side mounting plate accepts Redfield Palma, Warner,
with your rifle’s original bluing.
2B91E83�� $ 101.35 and M14/M1A rifles. Zelenak and other sights using 10-32 mount screws. Mounting plate
SPECS: Steel body, blued. Fits factory sight ramp on Ruger No. 1 and M77
#100-005-278AT Rear Elevation Knob, 3K44E38�� $ 49.99 rifles. Heights given below are measured from bottom of base to top is adjustable for vertical and horizontal position. a
b
of sight. White Bead - White polymer bead, .300" (7.6mm) high, .940" SPECS: Steel, matte black. Adapter base 2.25" (5.7cm) long, .90" (23mm)
(2.4mm) wide. Fiber Optic - Red fiber optic bead, .330" (8.38mm) high, high. Threaded 10-32. Weighs 3.1oz. (68 g).
MIDWEST INDUSTRIES SIG 556 .100" (2.5mm) wide. #527-100-015AT AR-15 Sight Base, 7B67I28��$ 69.99
#661-000-064AT .300" White Bead Front Sight, #527-100-100AT WR Sight Base, 7B67K28�� 69.99
FOLDING FRONT SIGHT N.E.C.G. “MASTERPIECE” 1F23M91�� $ 26.00 #527-000-004AT WR-MJT Sight Base, 7B67H28 �� 69.99
#661-000-066AT .330" Red Fiber Optic Front Sight,
Allows Use Of AR-15 Rear Sights On Your Sig; BANDED FRONT RAMP 1F35G88 �� 39.00
Fits Factory Sight Dovetail Classic, Hooded
Flip-up front sight deploys with the flick of a fin- Window-Style Front Sight Bands
ger to provide instant back-up to keep you in the Machined from solid, mild MERIT #3 & #4 TARGET SIGHT DISC
fight if your Sig 556’s primary optic or laser sight fails.
Fits the factory dovetail on the gas block, and is the correct height
steel; classic sight that’s easy to SAMSON SIG 556/522 Adjustable Aperture
fit and finish. A wide selection
to allow use of any Midwest Industries AR-15 flip-up rear sight. Uses
standard A2 front sight post to ensure correct sight picture and easy
of interchangeable blades match any hunting situation. Accepts QUICK FLIP FOLDING FRONT SIGHT Eyepiece For Popular
“Masterpiece” front sights only. Hood shown is optional. Hoods Target Sights
adjustment using an A2 front sight tool. Super-smooth pivot mech- A2
are available in Medium and window-style Large hood that features Familiar AR Sight Picture,
anism with sturdy ball-bearing detent locks positively in the raised light-admitting side cutouts for use with fiber optic front sights. Rugged Construction & Reliable Precision sight receiver
position and stays locked until you hit the pushbutton release. Folds SPECS: Mild steel, in-the-white. Band - approx. 3.3" (8.4cm) long. Height discs with 10, click-adjustable
Mechanism iris settings (.022" to .125" dia.) let shooters match peep sight ap-
down neatly out of your sight path when not in use. a b shown in chart is from top of barrel to bottom of dovetail. Hoods - approx-
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. imately 11/8" (3.1cm) long, Med. - .630" (16mm); Large - .708" (18mm) I.D. Machined aluminum replace- erture to light conditions. Internal spring eliminates face wobble.
#100-004-065AT Sig 556 Folding Front Sight, ment for factory front sight gives #3LS fits most Redfield, Lyman and Williams receiver sights. Sepa-
2A84C74�� $ 89.99 STOCK # MODEL I.D. (MM) HEIGHT PRICE your Sig the familiar AR-15/M16 sight rate model fits Browning 1885 factory sight. Master models add a
#661-120-551AT 1 .551" (14) .500" 1F68C00 $ 75.00 HK picture and lets you use readily- 11/2" (3.8cm) dia. flexible neoprene light shield and a steel cup that
#661-120-571AT 1A .571" (14.5) .421" 1F68N00 $ 75.00 available AR‑type clamp-on Pica- completely shades the opening. a b
tinny rear sights. Serves as a reliable backup sight that deploys and SPECS: Steel. 3/4" (19mm) dia. x 1/4" (6.3mm) thick disc. #3LS - 7/32" (5.6mm)
#661-120-590AT 2 .590" (15) .421" 1F68M00 $ 75.00 - 40 thread on /16" (7.9mm) lg. shank. Browning 1885 - 10-32 thread shank
5
retracts with the press of the large, easy-to-find release button.
N.E.C.G. “MASTERPIECE” #661-120-618AT 3 .610" (15.5) .421" 1F68C00 $ 75.00 Spring mechanism locks in both deployed and folded positions, fits Browning factory tang sights.
#661-120-650AT 4 .650" (16.5) .421" 1F68K00 $ 75.00 #571-003-001AT Merit #3LS, 1G44H34 ��$ 56.99
ADJUSTABLE REAR SIGHT #661-120-670AT 4A .670" (17) .386" 1F68A00 $ 75.00
and is concealed to resist fouling from dust and dirt. AR-style post
is the correct height to regulate with Samson and other many other #571-003-002AT Merit #3LS Master, 1G51B45�� 66.00
Precision Windage & Elevation Adjustment #661-120-689AT 5 .689" (17.5) .362" 1F68J00 $ 75.00 commercial Picatinny rail-mountable rear sights for the AR-15/M16 #571-003-004AT Browning 1885, 1G43N64�� 56.00
1F68H00 $ 75.00 (will not work with SIG 556/522 factory rear sights). Post adjusts
Notched, “V”-style blade is fully adjust- #661-120-708AT 5A .708" (17.9) .386" #571-003-014AT Browning 1885 Master, 1G51L45 �� 66.00
for elevation using the standard four-prong AR front sight tool. A2
able for windage and elevation. Machined #661-120-728AT 5B .728" (18.5) .362" 1F68J00 $ 75.00 model features a wide field of view and thick protective ears that
from solid steel, polished and blued to #661-120-748AT 6 .748" (19) .362" 1F68K00 $ 75.00 guard the post from impact. HK model has globe-style ears to give #4 HUNTING SIGHT DISCS - Compact, adjustable receiver sight
compliment the finest sporting rifle. you a centered target-style shooting picture. a discs give choice of iris openings from .025" to .155" diameter.
#661-120-768AT 6A .768" (19.5) .362" 1F68E00 $ 75.00 b
SPECS: Steel, polished, blued. 23/16" (5cm) SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 1" (2.5cm) External “click” spring.
long, .546" (13.8mm) wide, 1.6 oz. (44g) wt. .322" (8.1mm) from top of #661-120-787AT 6B .787" (20) .362" 1F68C00 $ 75.00 SPECS: Steel. 1/2" (12.7mm) diameter x 1/4" (6.3mm) thick disc, 7/32" (5.6mm)
long when deployed, 21/8" (5.4cm) long when folded, 11/4" (3.18cm) wide.
barrel to top of base. Solder-on or drill and tap for 8-36 screw. #661-120-827AT 6C .827" (21) .362" 1F68F00 $ 75.00 - 40 thread. #4LS - 11/32" (8.7mm) long shank. #4 10-32 - 5/16" (8.7mm)
Post height regulates correctly with Samson Quick Flip Folding Rear
Sights and ARMS #40A/#40L rear sights (both available separately), plus long shank, fits Marble tang sight. #4 SS – 5/16" (8.7mm) long shank, fits
STOCK # MODEL FITS BARREL DIA. PRICE #661-120-100AT Medium Sight Hood, 1F23A67�� $ 25.00 Lyman #2 tang sight.
most A2-height rail-mounted AR-15/M16 rear sights.
#661-105-830AT MR-L .731" To .830" 1F89L28 $ 99.00 #661-000-045AT Large Window-Style Hood, 1F31A83�� 34.00
#100-005-375AT A2 Front Sight, 1B87G21�� $ 94.99 #571-000-002AT #4 10-32 Sight Disc, 1G38E04 �� $ 48.99
#661-105-930AT MR-X .831" To .930" 1F90C94 $ 99.00 “MASTERPIECE” FRONT SIGHTS - #100-005-374AT HK Front Sight, 1B87F21�� 94.99 #571-000-003AT #4 SS Sight Disc, 1G37L43�� 48.00
Spring-loaded plunger and detent, #571-004-002AT Merit 4LS Sight Disc, 1G38K30�� 48.99
located in the “Masterpiece” Banded
Front Ramp, hold the sight blade into
the longitudinal dovetail; set screw
N.E.C.G CLASSIC EXPRESS SIGHT firmly locks the sight blade in place. S-5 S-4 S-1 ALLEY M1A/M14
Magnum Clamp Styles available: S-1 - 5/64" (1.9mm) and 3/32" (2.3mm) diameter sil-
APERTURE FRONT SIGHT KENSIGHT M1 CARBINE
ver bead. S-4 - fixed silver /32" diameter bead and fold-down 11/64"
3
Won’t Loosen Under Recoil (4.3mm) diameter Ivory bead. S-5 - 3/32" x 11/16" long red fiber optic
Globe Style Sight For REAR APERTURE SIGHT
Flip-up, windage adjustable, express- light pipe.
SPECS: Steel, blued. Base - 7/8" (22mm) long, S-4 is 3/4" (19mm) long; 7/32" M14/M1A & Garand High Quality Reproduction Of
style sights clamp securely into the pre-
(5.5mm) wide. Blade - 9/16" (14.3mm) long. Height - shown in chart is from Reduces Eye Fatigue The Factory Original
contoured base so they won’t shoot loose, even under heavy recoil.
Blank leaves require trimming to correct height. Drill and tap, or bottom of dovetail to top of blade. S-5 Light Pipe - 3/32" (2.3mm) Dia. x Cleaner sight and tar-
11
/16" (17mm) long. Modern, high-quality reproduc-
silver solder to barrel. P1 single leaf. P2 two leaves. P3 three leaves. get definition plus greatly tion of the original rear sight makes
SPECS: Steel, blued, polished finish. 31/16" (8cm) long. 1/4" (6.3mm) wide. 2.6 STOCK # MODEL HEIGHT (MM) PRICE reduced eyestrain for restoring your M1 carbine easier and
oz. (774g) weight. Fits barrel diameters: L .730" to .830", XL .830" to .930". 1F17I97 $ 19.00 higher match scores. In-
#661-121-197AT S-1 .197" (5.0) the final job look authentic. Patterned
stalls easily; no permanent after the factory rear sight using modern CAD/CAM design tech-
STOCK # STYLE PRICE #661-124-256AT S-4 .256" (6.5) 1F55N51 $ 59.00
alterations to rifle. Legal in NRA “Match Rifle” category only. a b niques and wire EDM cut from 4140 bar stock for tight tolerances.
#661-001-830AT P1-XL 1F131B29 $ 135.00 #661-000-040AT S-5 .256" (6.5) 1F36K02 $ 39.00 SPECS: Blued steel, 1" (2.5cm) long, .625" (15.8mm) diameter, .8 oz. (25g) Features audible clicks for precise windage adjustment and preset
#661-002-730AT P2-L 1F134A61 $ 144.00 #661-000-041AT S-5 .276" (7.0) 1F36G02 $ 39.00 wt. Includes 1 aperture. range increments for elevation adjustment.
#661-002-830AT P2-XL 1F134Q61 $ 144.00 #661-000-042AT S-5 .315" (8.0) 1F36J02 $ 39.00 #034-200-001AT M1 Garand Sight, 4C65B34�� $ 79.99 SPECS: Steel, blued, matte finish. Fits M1 Carbine.
#661-103-830AT P3-XL 1F147C09 $ 154.00 #661-000-043AT S-5 .354" (9.0) 1F36P02 $ 39.00 #034-200-014AT M1A/M14 Sight, 4C65K34 �� 79.99 #100-004-084AT Rear Aperature Sight, 5A26G03��$ 26.99
order on the web

LYMAN TARGET FRONT SIGHT LYMAN RECEIVER SIGHT N.E.C.G. RUGER® RECEIVER SIGHT
3 Styles Fit Hundreds Of Gun Models
SIGHT APERTURES Low, All Steel With Eight Inserts
Rugged and precise sights, machined to hug
Clamps Quickly To Ruger® Integral Bases
All steel front sight with eight inter- the receiver for lowest line of sight, least protru- Finely machined steel receiver sight
A Complete Selection Of changeable sight inserts that are locked sion. Audible-click, 1/4 minute adjustments for el- clamps to factory ring notches on Ruger rifles;
Williams Apertures into place by threaded cap. Sight includes serves as a primary hunting sight in situations
evation and windage. Elevation slide is scribed in
Have the right combination insert set. a
b 3 minute increments. Quick release allows slide where a scope may not be practical. Pack as
of aperture and disc always on SPECS: Sight tube- 9/16" (14.3mm) dia.. Dovetail to be removed with a press of a button. Eleva- an emergency sight to save your hunt in case of scope failure. In-
hand. Perfect to change be- base is 3/8" (9.5mm) wide for standard dovetail. Use 17AML with 57SML tion stop screw permits instantaneous return to zero. Model 57 is stall and remove without loss of zero. Height matches most M-77®,
tween hunting and target shoot- Receiver sight. 17 ATC is for use with factory vernier tang sight on T/C for round receivers; Model 66 is for flat receivers, 66 WB includes 77/22® and No. 1 factory front sights. Includes .093" and .125" aper-
ing or as replacements for miss- muzzleloaders. 17AEU fits European 9mm (nominal .360" x .070") dove- semi-target knobs. The 57 SML is a special model for tang installa- tures that draw your eye to the sight for fast sight alignment. Adjust-
ing ones. Fit Williams and Lyman, tail. HEIGHT is from bottom of dovetail to center of aperture. tion on muzzleloaders such as T/C Hawken and similar rifles and able for windage and elevation. a b
7
/32"-40 sights. a
b STOCK # HEIGHT MODEL includes semi-target knobs. The 57 SMET includes target knobs. a b SPECS: Steel, blue finish. 11/4" (3.2cm) long. 3/4" (19mm) high. 11/4" (3.2cm) wide.
SPECS: Aluminum, black, anodized. Comes with two apertures, 1/2" #661-040-100AT Receiver Sight, for Ruger, 1F84M88�� $ 90.00
STANDARD SHANK SIGHT APERTURES - Standard lengthshank #539-017-360AT .404" 17AHB
(12.7mm) x .093" (2.3mm) and /8" (15.8mm) x .040" (1.1mm).
5
fits Williams Foolproof, Target Foolproof, and 5D only. #539-017-444AT .465" 17AEU
SPECS: 7/32"-40 thread. 3/8" or 1/2" STD Aperture Paks include three, 3/8" or #539-017-445AT .494" 17AMI FITS MODEL STOCK #
1
/2" O.D. apertures: one each with .050", .093" and .125" aperture holes. #539-017-446AT .494" 17AML BROWNING Sako 57 SME #539-057-002AT
7
/8" x .050" Target Aperture Pak includes three, 7/8" O.D. apertures with
#539-017-532AT .584" 17AUG BSA Majestic 57 WJS #539-057-003AT SMITH ENTERPRISE M1/M14/M1A
.050" aperture holes.
#080-766-380AT 3/8" Std. Aperture Pak, 8K30B33�� $ 59.99 #539-017-852AT .854" 17ATC COLT Sako 57 SME #539-057-002AT FRONT & REAR SIGHTS
— Advise # — 17A Front Sight, 5K34P94�� $ 39.99 ENFIELD U.S. 1917, .30-06; British 1914 .303B (altered 57 SME #539-057-002AT M14/M1A Front Sight
#080-766-500AT 1/2" Std. Aperture Pak, 8K32C45�� 36.99 receiver) For Easy Restorations Or
#080-766-705AT 7/8" x .050" Tgt. Apts., 8K40B71 �� 46.99 MARLIN 39A 66 MC #539-066-003AT Competition
INDIVIDUAL STANDARD APERTURES - One Per Package MARLIN 336 66 LA #539-066-002AT Heat-treated, 4130 chrome
SPECS: 7/32"-40 thread. 3/8", 1/2" or 7/8" O.D apertures. MOSSBERG 402 66 MC #539-066-003AT moly front and rear sights make
#080-766-381AT 3/8" x .050" Aperture, 8K11P59�� $ 22.99
LYMAN MJT TARGET SIGHT MUZZLELOADERS Lyman Great Plains, Trade, Deer Stalker 57 GPR #539-000-001AT it fast and easy to upgrade your
original military sights for im-
#080-766-382AT 3/8" x .093" Aperture, 8K11F59 �� 23.99 90 MJT UNIVERSAL RECEIVER SIGHT - MUZZLELOADERS T/C Hawken and others 57 SML #539-057-004AT
proved strength and accuracy. M1 Garand Front Sight
#080-766-383AT 3/8" x .125" Aperture, 8K11B59 �� 22.99 Features windage and elevation knobs IN-LINE MUZZLELOADERS White Systems In-line 57 SMET #539-057-007AT Parkerized finish reduces glare
#080-766-501AT 1/2" x .050" Aperture, 8K13L68�� 17.99 with click detents in minute and 1/4 minute REMINGTON 141 66A #539-066-001AT and helps deflect light for a clear, easy-to-acquire sight picture in
graduations. a b
#080-766-502AT 1/2" x .093" Aperture, 8K13G68�� 17.99 REMINGTON 700, 721, 722, 660 57 WJS #539-057-003AT all light conditions. Match-type front sights feature a narrow, .062"
SPECS: Machined aluminum body, steel
#080-766-706AT 7/8" x .050" Aperture, 8K14D61�� 16.99 REMINGTON XP-100 57 WJS #539-057-003AT wide front blade for a crisp, clean sight picture at all normal com-
knobs. Matte black finish. Adjusts from 1.06"
petition ranges. Garand Tritium front sight has a self-illuminating,
(2.6cm) to 1.56" (3.9cm) above bore line. In- SAVAGE 10, 110 57 WJS #539-057-003AT
LONG SHANK SIGHT APERTURES - Fits Williams green Tritium insert in the .091" wide blade for fast sight pick up in
cludes 7/8" (22mm) target disc w/.040" (1mm) aperture. Wt. 4 oz. (113g). WINCHESTER 64, 92, 94 66 A #539-066-001AT
WGRS ONLY. Longer shanks allow correction for low-light conditions. a b
Fits Williams Foolproof Bases. For .22RF target rifles.
proper eye relief. Standard or brass-ringed, Twi- WINCHESTER 70 57 WJS #539-057-003AT SPECS: Steel, Parkerized finish. Match Front - .062" (1.6mm) wide blade.
light (TW) aperture. #539-090-000AT MJT Receiver Sight, 5K90Q38 �� $ 99.99 Includes setscew. Standard Front - .079" (2mm) wide blade. Includes
WINCHESTER 1886 Win. & Browning 66 WB #539-000-004AT
SPECS: 7/32"-40 thread. 3/8" Long Shank (L/S) or 3/8" JAP Arisaka 6.5mm & 7.7mm 57 SME #539-057-002AT setscrew. Garand Tritium Front - .091" (2.3mm) wide blade. Includes
20 MJT GLOBE FRONT SIGHT - Machined steel,
Twilight, Long Shank (TW L/S) Aperture Paks include clamping screw.
globe front with interchangeable inserts. a b MAUSER 98, 91, 93, 94, 95, 96, 1904, 1909, 1936, G33/40 57 SME #539-057-002AT
three, 3/8" O.D., long shank apertures: one each with .050", .093" and SPECS: Steel, blued. 11/4" (3.1cm) long, .875" (22.2mm) #851-100-101AT Match M1 Garand Front Sight,
.125" holes. MAUSER 98, 91, 93, 94, 95, 96, 1904, 1909, 1936, G33/40 57 SMET #539-057-007AT
diameter. 3/8" (nominal) dovetail. 1.8 oz. (51g) wt. .700" 1E40E80 �� $ 42.99
#080-784-380AT 3/8" L/S Aperture Pak, 8K36M91�� $ 43.99 SPRINGFIELD 1903 57 SME #539-057-002AT
(17mm) from bottom of dovetail to center of aperture. #851-000-085AT M1 Garand Tritium Front Sight,
#080-784-390AT 3/8" TW L/S Aperture Pak, 8K34F85�� 41.99 Includes 2 posts, 5 aperture inserts. SPRINGFIELD 1903 57 SMET #539-057-007AT 1E84H99�� 84.99
#539-620-000AT MJT Globe Sight, 5K44L73�� $ 49.99 — Advise # — Receiver Sight, 5K90N32��$ 99.99 #851-114-106AT Match M14/M1A Front Sight,
TWILIGHT APERTURES - A light gathering brass ring surrounds 1E37K47�� 41.99
the peep to enhance visibility in low light. Fits Foolproof, Target 93 MJT AR-15 & MATCH RIFLES TARGET FRONT SIGHT - Ma- TARGET KNOBS FOR LYMAN 57 - Knurled thumb knobs replace
Foolproof, and 5D sights only. chined steel globe front with interchangeable the original screws on the 57 series.
SPECS: 7/32"-40 thread. Standard length shank. 3/8" Twilight (TW) Aperture inserts. Knurled bezel locks aperture in place. Fits SPECS: Blued steel. Windage and Elevation Knob sold per each. Fit Ly-
Pak includes three 3/8" O.D. apertures: one each with .050", .093" and .125" standard dovetail bases. Accepts Anschutz inserts. man 57 series only.
aperture holes. Individual apertures also sold separately. Quick-detach locking thumbscrew retains sight #539-399-262AT Target Elevation Knob, 5K2A69 ��$ 3.99 TECH SIGHTS RUGER 10/22
#080-767-380AT 3/8" TW Aperture Pak, 8K39I76��$ 47.99 on base. ab #539-399-261AT Target Windage Knob, 5K2L69�� 3.99
SPECS: Steel, blue, matte finish. .550" (13.9mm) from GI-STYLE APERTURE SIGHTS
INDIVIDUAL TWILIGHT APERTURES - One Per Package bottom of dovetail to center of aperture. 11/4" (3.1cm) long, .750" (19mm)
diameter. Includes - five disc inserts with .126" (3.2mm), .154" (3.9mm),
Provides Familiar M16
#080-767-050AT 3/8" x .050" TW Aperture, 8K14A34�� $ 17.99
.161 (4.1mm), .169" (4.3mm), .177" (4.5mm) apertures; Two post inserts Service Rifle Sight Picture &
#080-767-093AT 3/8" x .093" TW Aperture, 8K14G34�� 17.99
with .067" (1.7mm) and .102" (2.6mm) wide posts. LYMAN Improved Accuracy
#080-767-125AT 3/8" x .125" TW Aperture, 8K14I34�� 17.99
#539-620-100AT 93 Match Sight, 5K58A62�� $ 64.99
NO. 2 TANG SIGHT Replacement sight sets
give your 10/22 a longer sight
The Original No. 2; Now Back In Production radius for improved accuracy
potential, plus the same sight picture as an AR-15/M16 with military-
The original folding tang sight that
N.E.C.G PEEP-SIGHT RIMFIRE
N.E.C.G increases sight radius for greater po-
issue sights. Installation requires no gunsmithing, no drilling/tap-
ping, and no permanent alterations to the rifle. Rear sight mounts
tential accuracy with your favorite le- using the factory-provided holes for a scope base. All-steel front
Provides Excellent Sight Picture, Clamps
To Weaver-Style Bases
RECEIVER SIGHT ver action rifle. Sight features rugged, sight assembly has a standard detent-locking M16 post surrounded
all-steel construction, knurled locking by protective ears that guard it from damage and misalignment. User
Precision Target Acquisition; screw, index marks on aperture post, .093" quick sight and .040" large
Solid-steel sight is fully adjustable for may substitute any aftermarket post that replaces the standard A2.
Mounts On Grooved Rimfire Receivers disc apertures. Includes rear stock screw and front tang screw. a b TSR100 set’s rear sight is adjustable for windage and features close-
windage and elevation; provides a primary
SPECS: Steel, blue. M-94, c-to-c 2.200", fits Winchester Model 94. M-36, range and long-range flip-up apertures similar to the M16A2 sight.
sight when hunting dangerous game and a Machined, steel peep sight gives you a c-to-c .845", fits Marlin Models 336, 30 and 1895. Win. 1886, fits original For even greater precision, the TSR200 set’s rear sight has a single
scope is not practical, or an emergency backup. Furnished with precise sight picture for pin-point accuracy from your match or Winchester and Browning copies without tang safety. Some rifles may aperture that uses a rotating dial for fine adjustments in elevation;
.093" and .125" diameter apertures; allows you to shoot very accu- hunting rifle. Sight attaches to grooved, 3/8" dovetail, rimfire receiv- require drilling and tapping. Can be adapted to other rifles with tangs. click adjustable for windage.
rately, even under poor light conditions. Fits Weaver-style or Pica- ers. Fully adjustable for windage and elevation; comes with .093"
tinny base, may be easily removed and returned to zero every time. and .125" apertures, plus a handy wrench for easy installation. a b #539-050-002AT Winchester 94 No. 2 Tang Sight, SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90"
Includes two elevation slides. a b SPECS: Steel, black, matte finish. 1" (2.5cm) long, 3/4" (19mm) wide, 1/2" 5K86M87��$ 93.99 (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94"
SPECS: Steel, blue finish. 11/8" (2.9cm) long, 11/2" (3.8cm) wide, 1" (2.5cm) (12.7mm) high. .093" (2.3mm) and .125" (3.1mm) apertures. Fits grooved, #539-050-036AT Marlin 36 No. 2 Tang Sight, 5K86L87�� 93.99 (24mm) tall.Sold as front/rear sight sets.
high. Aperture - /32-40 thread, accepts Williams and Merit sight discs.
7 3
/8" (9.5mm) rimfire receivers. #539-050-086AT Winchester 1886 No. 2 Tang Sight, #100-006-910AT TSR100 10/22 Sight Set, 2C57H54�� $ 59.99
#661-000-035AT Weaver Peep Sight, 1F84G88 �� $ 90.00 #661-000-044AT Rimfire Receiver Sight, 1F84E88�� $ 90.00 5K86P87 �� 93.99 #100-006-911AT TSR200 10/22 Sight Set, 2C67A29�� 69.99
SMITH ENTERPRISE M14 TRUGLO RIFLE SIGHT SET SHAVER GLOBE SIGHT INSERTS TRIJICON® RIFLE SIGHT
TRITIUM CLOSE COMBAT SIGHT
Fully Adjustable, Fiber Optic Finer Crosshairs, Posts Or Self-Luminous Replacement Sights
Increases Visibility Silhouettes For Greater For Popular Rifles
Dependable Backup Sight For
Close Range Combat In Low Light Accuracy The ultimate, self-luminous rifle sight. Im-
Combination red front and
green rear provides eye-catch- Developed specifically proves sight pickup and visibility during low-
Genuine Trijicon, self luminous vial makes ing contrast for quick sight alignment. Fiber optic rods gather avail- light hours when game is most active. All sights
this the perfect backup sight for close range for silhouette shooters using
able light and draw your eye to the sights to get you on target fast. globe front sights. Thinner, include rugged sapphire crystal, self-illuminating Tritium lamps for a
combat in conditions with limited visibility. Machined aluminum body adjusts for windage and elevation. Front bright, well-defined aiming point and extra-long life. Lamps guaran-
Wire EDM machined, steel ears protect the tri- more versatile crosshairs,
and rear set replaces factory sight without alteration or gunsmithing. posts and apertures do away teed by the manufacturer to remain self-luminous for 12 years. a b
tium vial. Dovetailed base securely clamps to Remington fits late production rifles and shotguns with adjustable SPECS: Steel body, blued. Tritium insert. Includes front and rear sight un-
Mil-Spec M14 flash suppressors or the Smith Enterprise Gas Cylinder with thick, bulky inserts; won’t hide that 500 meter ram or tiny
sights. Ruger® 10/22® fits factory barrels. Winchester 94 fits models “black” you need to hit. ab less shown in chart. All sights are adjustable if rifle or shotgun barrel was
Lock with sight dovetail (found elsewhere in catalog). a b with a front sight ramp. a
b originally equipped with factory adjustable sights.
SPECS: 4140 chrome moly steel, black phosphate finish. .650" (1.6cm) SPECS: 1095 spring steel, blued. .01" (.25mm) thick. Post & Aperture Card
SPECS: Aluminum, black, matte finish. Front and rear set. includes 3 apertures, 4 crosshairs, 3 posts. Lyman 17A also fits Browning STOCK # FITS PRICE
long x .625" (1.5cm) wide. .4 oz. (11g) wt.
#902-000-005AT Rem. Rifle Sight Set, 2K25G43�� $ 26.99 BPCR. .470" (12mm) dia. Redfield/Alley - .550" (14mm) dia. Fits Redfield #892-415-125AT AR-15 A1/A2 front only 2H58C00 $ 58.00
#851-000-065AT Tritium Close Combat Sight, 65/66 and Alley globe sights. Large Lyman/Anschutz - .675" (17.1mm) dia.
1E82I42��$ 91.99 #902-000-006AT Ruger 10/22 Rifle Sight Set, #892-415-025AT AR-15 A1/A2 with 10-36 windage screws 2H79A66 $ 82.00
2K30E91�� 32.99
STOCK # MODEL PRICE #892-407-001AT Remington 74, 76, 760, 7400, 7600, 870, 2H107C00 $ 107.00
#902-000-007AT Winchester 94 Rifle Sight Set,
#781-100-017AT Lyman 17A Sight 1H19I62 $ 21.95 1100, 11-87 (w/rifle sights) front and
2K30H91�� 32.99
#781-100-010AT Redfield/Alley 1H19I13 $ 19.99 rear 3-dot
N.E.C.G. CZ 550 GHOST #781-100-011AT Large Lyman/Anschutz 1H19F03 $ 20.95
RING PEEP SIGHT WILD WEST GUNS LEVER RIFLE SIGHTS

Precision Crafted For Reliable
WILLIAMS RIFLE SIGHT BEAD
Function; Fully Adjustable Improves Sight Picture WILLIAMS All-Metal Beads For Ramps &
Rear ghost ring improves sight picture Dovetailed Barrels
Beautifully machined, all steel peep sight features the larger
opening of a .096" I.D. ghost ring aperture for close range encounters and speeds target acquisition. Adjusts REAR DOVETAIL FIRESIGHT
for windage and elevation. WPM 94 fits Thin, streamlined, almost invisible
with dangerous game. Extra-thick steel clamps with slotted, knurled Replaces 3/8" Dovetail Rear Sights
side-eject Winchester 94 only; requires blade with a machined bead gives a
knobs lock solidly to the rear square bridge on CZ 550 rifles. Integral With Fiber Optics
drilling/tapping if receiver is not equipped crisp, highly visible sight picture. a
b
indexing lug engages notch on left side of receiver for complete im-
with factory mounting holes. WPM 95 fits SPECS: Steel blade, blued. Brass bead, pol-
mobilization of sight and proper return-to-zero. Ghost ring provides Highly visible fiber optic rear
Marlin factory scope base holes. a b ished. Nominal .375" dovetail. Narrow are .250" (6.35mm) wide to fit Wil-
a wide field-of-view and eliminates small peep obstruction caused by sight fits lever actions, .22 rimfires,
SPECS: Steel, matte blued. Includes screws. WPM 94 fits Win. 94. WPM liams Streamlined and Shorty Ramps. Medium are .340" (8.6mm) wide to
snow and other debris. Fine threaded sight post is locked in place with and most American-made rifles
95 fits Marlin 1895, 1894, 336, and 30. fit factory ramps including Marlin and Remington. Wide are .531" (13.5mm)
two, Allen head setscrews to prevent loosening under the heaviest with the standard 3/8" dovetail. Bright
#981-100-094AT WPM 94 Sight, 1H119Q99 ��$ 119.99 for dovetailed barrels on .22 rifles and muzzleloaders. All heights include
recoil; each half of post turn yields approximately 1/2" elevation cor- green dots are easily seen under the .090" thick dovetail portion itself.
rection at 100 yards. Left and right clamps adjust independently for #981-100-095AT WPM 95 Sight, 1H119I99�� 119.99 most light conditions and help you get on target quickly. Adjustable
precise windage control. Installation requires no modification to rifle. for windage and elevation. No gunsmithing required. a b STK# 1/16" GOLD STK# 3/32" GOLD HEIGHT WIDTH
SPECS: Steel, blue, matte finish. 7/8" (2.2cm) long, 11/2" (3.8cm) wide, 3/4" SPECS: Aluminum, matte black. Green fiber optic rod. Approximately 5/16" #962-161-250AT NA .260" Narrow
(1.9cm) high, .096" (2.4mm) diameter aperture. 1.7 oz. (48g) wt. Includes from bottom of blade to bottom of notch. Fits /8" dovetails.
3
aperture adjustment tool and Allen wrenches. #962-161-251AT NA .260" Medium

#962-000-098AT Dovetail Rear Firesight, 2F15L25��$ 16.95
#661-000-046AT CZ-550 Ghost Ring Sight, 1F84F88�� $ 90.00 WILLIAMS AK/SKS #962-161-290AT NA .281" Narrow
#962-161-310AT #962-165-310AT
ADJUSTABLE REAR SIGHT #962-161-311AT NA
.312"
.312"
Narrow
Medium
Drop-In Replacements For Military #962-161-340AT NA .343" Narrow
Front/Rear Sights WILLIAMS TARGET FOOLPROOF
TRUGLO DOVETAIL FRONT SIGHT #962-161-341AT
#962-161-370AT
NA
NA
.343"
.375"
Medium
Narrow
No gunsmithing required for in- Micrometer Click Adjustments
Metal Body For Durability; Bright Fiber creased accuracy and improved sight #962-161-371AT NA .375" Medium
Optic Insert Increases Visibility picture with this aperture rear sight FOR .22 LR TARGET RIFLES - True, #962-161-372AT NA .375" Wide
for hunting or target shooting. Fully target receiver sights with positive-
Light-gathering red fiber optic rod offers a click, micrometer adjustments on #962-161-401AT NA .406" Medium
bright, eye-grabbing bead for fast sighting. Fits adjustable for elevation and windage. Easy to install. Replacement
both windage and elevation, knurled #962-161-450AT NA .450" Narrow
nominal 3/8" dovetail. a b sight is held in place with a single, hardened, steel roll pin. a b
SPECS: Aluminum, blued, matte finish. Aperture - 3/8" disc dia. with .150" target knobs and elevation lock. All #962-161-502AT NA .500" Wide
SPECS: Aluminum, black, anodized finish. 3/4" (19mm) long. Red optic come with 7/8" x .050" aperture sight disc. a b
dia. aperture. Includes roll pin and instructions. Fits all AK or SKS rifles #962-161-531AT NA .538" Medium
rod is 3/4" long, .060" (1.5mm) diameter. Height measured from top of SPECS: Aluminum, black, anodized. HIGH, for target rifles with globe
ramp to top of sight. and carbines. #962-161-571AT NA .570" Medium
fronts. Aperture 1.250"-1.750" above bore axis. LOW for sporter rifles with
#902-000-008AT F/O Dovetail Front Sight, .450" High, #962-445-600AT Aperture SKS Sight, 2F19E71�� $ 20.99 — Advise # — Williams Gold Bead, .260" thru .450"
standard front sights (may require a higher bead). Aperture .750" to 1.250"
2K14L51�� $ 15.99 #962-474-760AT Aperture AK Sight, 2F19L71 �� 20.99 above bore axis. high, 2F11K36�� $ 11.99
#902-000-010AT F/O Dovetail Front Sight, .530" Hight, #962-201-001AT Target FP High, 2F62H08�� $ 65.99 — Advise # — Williams Gold Bead, .500" thru .570"
SKS FIRESIGHT SET - Bright, red high, & all “Wide”, 2F11C36�� 11.99
2K14L51�� 15.99 #962-201-002AT Target FP Low, 2F62M08 �� 65.99
fiber-optic front and adjustable
aperture rear sight makes a fast, ac-
curate sighting combination. Front DELUXE TARGET FOOLPROOF - Adds markings and arrows for
blade fits in the SKS front sight “UP” and “R”. Uses steel, quick-release elevation nut for elevation/
WILLIAMS MAUSER 96 APERTURE SIGHT housing; rear aperture replaces the windage overarm. a b
SPECS: Aluminum, black, anodized. Line of sight is 1.250"- 1.750" above
WILLIAMS SHORTY DOVETAIL RAMP
rear sight leaf with no gunsmithing required. Fully adjustable for Compact & Attractive For Smaller Guns
windage and elevation. bore axis.
No Gunsmithing Replacement For #962-201-210AT D/T Foolproof Sight, 2F75A72��$ 79.99 Polished, blued steel. Hoodless.
SPECS: Aluminum, blue, matte finish. Fiber optic, red, sight dot. Aperture;
Military Rear Sights Sweat-on or screw-on. a b
3
/8" disc diameter with .150" diameter aperture.
TARGET FOOLPROOF BASES - Adapt sights above to .22 rifles. SPECS: Height shown in parenthesis in
Drop-in for a vast improvement #962-000-018AT SKS Firesight Set, 2F30A29��$ 31.99 SPECS: Rem. 510 also fits 511, 512, 513T, 521T. Rem. 540X also fits 541S,
in sight picture over the military issue. chart is from top of barrel to bottom
SKS FRONT FIRE SIGHT - Fits in the SKS front sight aperture with 580, 581, 582. a
b of dovetail. Width of ramp is .250" (6.3mm). Made only in heights shown.
Adjusts for windage and elevation; works with original front sight.
No permanent changes to rifle. a b no gunsmithing required. Bright, red fiber-optic dot makes a great #962-201-075AT Target FP Base, Win. 75, 2F16M19�� $ 17.99
STOCK # HEIGHT STOCK # HEIGHT
SPECS: Aluminum, anodized, black, satin finish. Fits M96 and other Swed- sighting combination when used with the Williams SKS Adjust- #962-201-510AT Target FP Base, Remington 510,
able Rear Sight. 2F16K19�� 17.99 #962-010-032AT 1
/8" (.032) #962-010-188AT 9
/32" (.188)
ish military, small ring Mausers. 3/8" disc dia., .150" dia. aperture. Includes
instructions. SPECS: Steel, blue, matte finish. Fiber optic, red, sight dot. #962-201-540AT Target FP Base, Remington 540X, #962-010-094AT 3
/16" (.0945) #962-010-282AT 3
/8" (.282)
#962-660-196AT Aperture M96 Sight, 2F19A71 �� $ 20.99 #962-602-140AT SKS Front Sight Bead, 2F15B92�� $ 16.99 2F16I19�� 17.99 — Advise # — Shorty Ramp, 2F17K90�� $ 18.99
order on the web

WILLIAMS
RIFLE FIRE SIGHT
WILLIAMS SIGHT SELECTION CHART
Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt
Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height
Glowing, Fiber Optic Dots For Height Height Height abv. Bbl. Height Height Height abv. Bbl. Height Height Height abv. Bbl. Height Height Height abv. Bbl.
Faster Sight Pickup COMMERCIAL RIFLES REMINGTON 721, 722 WEATHERBY MARK V 6.5 JAP
Barrel Diameter 4-1/4" ahead of Receiver .735
Barrel Diameter 5-1/4" ahead of Receiver .750 Barrel Diameter 4-1/4" ahead of Receiver .730
Barrel Diameter 22" ahead of Receiver .605 Barrel Diameter at Muzzle .555 Barrel Diameter 22" ahead of Receiver .635
Easy-to-install front sights for BROWNING 30-’06 (FN Mauser) Height of Factory Ramp and Bead above Barrel .535 Height of Factory Ramp and Bead above Barrel - Height of Military Front Sight above Barrel -
Barrel Diameter 4" ahead of Receiver .980
popular centerfire and muzzleloading Barrel Diameter at Muzzle .585 FP-98 (Fits Right 5D-JEMS or
FP-70, 5D-70 - 3/8" .312 .594
rifles gather ambient light for superb visibility. The more light, the Height of Factory Ramp and Bead above Barrel .700 WGOS-M 1/4" 5/16" .312 .531 or Left Hand) MS - 7/16" .312 .656 FP-JAP - 7/16" .260 .604
WGOS-M 1/4" 5/16" .281 .500
brighter the round, red beads glow; won’t “wash out” even in the FP-98 - - .280 .594
WGOS-M
WGOS-M
5/16" 3/8" .312
3/8" 7/16" .312
.594
.656
WGOS-S
WGOS-S
1/4" 5/16" .312 .531
3/8" 7/16" .312 .656 WGOS-M 5/16" 3/8" .281 .563
strongest sunlight. Narrow sights fit Williams Streamlined and Shorty WGOS-L 3/16" 3/8" .312 .594 WGOS-M 3/8" 7/16" .281 .625
WGOS-L 1/4" 7/16" .312 .656 REMINGTON 760, 740, 742
Ramps. Medium sights fit most factory ramps including Marlin and Barrel Diameter 4-12/" ahead of Receiver .800
WINCHESTER 61, 61 MAGNUM 7.7 JAP
Remington. Wide sights are for .22 rimfire rifles and muzzleload- BROWNING 308 AND 270 (FN Mauser) Barrel Diameter 20-3/4" ahead of Receiver .600
Barrel Diameter 5" ahead of Receiver
Barrel Diameter 22-1/2" ahead of Receiver
.725
.584
.745
.620
ers. a
b Barrel Diameter at Muzzle .500
Height of Factory Front Sight above Barrel (old style)
Height of Factory Front Sight above Barrel (new style)
.425
.640
Height of Factory Front Sight above Barrel .260 Height of Military Front Sight above Barrel -
SPECS: Blued steel. Fiber optic insert. Beads: 1⁄16" (1.6mm) dia. Fit nominal Height of Factory Ramp and Bead above Barrel .800
FP-760 or WGOS-S 3/16" 9/32" .281 .469 5D-JEMS or
3⁄8" dovetail. Number indicates height, letter (N, M or W) indicates base FP-98 - 7/16" .345 .689 5D-570/740 - 5/16" .281 .500 FP-JAP
WGOS-M
- 7/16" .260
1/4" 5/16" .312
.604
.531
width. Height is measured from bottom of dovetail to top of sight. N WGOS-L
WGOS-L
3/16" 7/16" .281 .625
1/4" 7/16" .345 .689
WGOS-M
WGOS-M
3/16" 5/16" .281 .500
5/16" 7/16" .281 .625
WINCHESTER 63 WGOS-M 5/16" 3/8" .312 .594
Series -.250" (6.3mm) wide base. M Series - .340" (8.6mm) wide base. W WRGS-760 - 7/16" .281 .625 Barrel Diameter 21-1/2" ahead of Receiver .565
WGOS-M 3/8" 7/16" .312 .656
Series - .531" (13.5mm) wide base. BROWNING AUTO RIFLE Height of Factory Bead above Barrel .260 AMERICAN KRAG
Barrel Diameter at Muzzle .605
REMINGTON 788 Barrel Diameter 4-1/4" ahead of Receiver .890
Barrel Diameter at Dovetail .875 FP-94 - 3/16" .312 .406
Barrel Diameter 4-1/2" ahead of Receiver .893 Barrel Diameter 21" ahead of Receiver .670
Height of Factory Ramp and Bead above Barrel .560
STOCK # HEIGHT/WIDTH STOCK # HEIGHT/WIDTH Barrel Diameter 4-1/2" at Muzzle .587
WGOS-S 3/16" 9/32" .281 .469 Height of Military Front Sight above Barrel .460
#962-564-320AT 260 N #962-564-430AT 375 M WGRS-BAR
WGOS-BAR-
- 7/16" .345 .6895
WINCHESTER 64, .30-30 FP-A-KRAG - 7/16" .312 .656
WGOS-L 1/4" 3/8" .281 .563
#962-564-330AT 290 N #962-564-440AT 406 M Special 3/16" 7/16" .345 .6895 FP-788 - 5/16" .312 .531
WGOS-L 5/16" 7/16" .281 .625
WGOS-BAR-L 3/16" 3/8" .281 .563 WGOS-L 3/8" 7/16" .345 .689
#962-564-340AT 312 N #962-564-450AT 450 M RUGER 10-22
MARLIN 39A, .22 Caliber GERMAN 98 MAUSER
#962-564-350AT 343 N #962-000-085AT 500 M Barrel Diameter 4" ahead of Receiver .780 Barrel Diameter 2" ahead of Receiver
Barrel Diameter at Muzzle
.860
.580
FP-94 or
5D-94/36 - 5/16" .281 .500 Barrel Diameter 4-1/4" ahead of Receiver .900
#962-564-360AT 375 N #962-564-460AT 538 M Height of Factory Ramp and Bead above Barrel .350 Height of Factory Ramp and Bead above Barrel .412 WGOS-M 3/16" 5/16" .281 .500
Height of Military Front Sight above Barrel .485
#962-564-370AT 406 N #962-564-470AT 570 M FP-39 or 5D-39 - 1/8" .312 .344 FP-RU - - - .450 Bead
WINCHESTER 69 FP-98 or
5D-RU - - - .450 Bead 5D-JEMS - 3/8" .281 .563
#962-564-380AT 450 N #962-590-830AT 375 W WGOS-M 3/16" 9/32" .260 .448
WGRS-RU - - - .450 Bead
.782
.638 WGOS-L 1/4" 3/8" .281 .563
WGOS-L 3/16" - - .583 Bead WGOS-L 3/8" 7/16" .345 .689
#962-564-390AT 260 M #962-590-790AT 437 W MARLIN 336 Height of Factory Front Sight above Barrel .232
#962-564-400AT 290 M #962-590-800AT 500 W Barrel Diameter 22" ahead of Receiver .640 RUGER 44 MAGNUM WGOS-M 3/16" 9/32" .281 .469 91, 94, 95 MAUSERS
Height of Factory Ramp and Bead above Barrel .480 Barrel Diameter 4-1/4" ahead of Receiver .816
#962-564-410AT 312 M #962-590-810AT 538 W Barrel Diameter 17-1/2" ahead of Receiver .625 WINCHESTER 70 WESTERNER, STANDARD
FP-36 or Height of Military Front Sight above Barrel .485
#962-564-420AT 343 M #962-590-820AT 570 W 5D-94/36 - 5/16" .312 .531
Height of Factory Ramp and Bead above Barrel .475 Barrel Diameter 5-1/4" ahead of Receiver .790
FP-98 or
WGOS-L 3/16" 9/32 .312 .500
— Advise # — Rifle Fire Sight, 2F15D13 �� $ 15.99 FP-RU, 5DRU
WGOS-M
- 5/16" .312 .531
3/16" 9/32" .312 .500
Height of Factory Ramp and Bead above Barrel .477 5D JEMS
WGOS-M
- 3/8" .281
1/4" 5/16" .312
.563
.531
REMINGTON NYLON 66, 76, 10, 11, 12 WGOS-M 3/8" 7/16" .345 .689 FP-70, 5D-70 - 3/8" .312 .594 WGOS-M 5/16" 3/8" .312 .594
Barrel Diameter 3" ahead of Receiver .625 WGRS-44 - 3/8" .281 .563 WGOS-M 3/8" 7/16" .312 .656
WGOS-M 3/16" 5/16" .281 .500
FIRE SIGHT ASSORTMENT - Have the Barrel Diameter 18" ahead of Receiver .625
Height of Factory Ramp above Barrel .465
most popular sights on-hand for quick SAVAGE 24 V WINCHESTER 70 FEATHERWEIGHT 7.62 RUSSIAN M91
repairs and installations to get your cus- FP-760N, Barrel Diameter 4-1/2" ahead of Receiver .505 Barrel Diameter 4-1/4" ahead of Receiver .795
5D-760N - 3/8" .281 .563 Barrel Diameter at Muzzle .505 Barrel Diameter 20" ahead of Reciever .565
tomers back to shooting quickly! Handy 5D-510 (for round Height of Factory Ramp and Bead above Barrel .545 WGOS-M 1/4" 5/16" .281 .500
kit contains red, fiber optic front sights receiver) - 3/8" .281 .563 WGOS-L - 9/32" .312 500 WGOS-M 5/16" 3/8" .281 .563
WGOS-S 1/4" 9/32" .281 .469 5D-22/410 - 9/32" .260 .450 FP-70, 5D-70 - 3/8" .312 .594 WGOS-M 3/8" 7/16" .281 .625
in seven different heights and both WGOS-S 5/16" 5/16" .312 .531 WGOS-M 1/4" 3/8" .281 .563
narrow and medium base widths, plus WGOS-S 3/8" 3/8" .312 .594 #1 SMLE
SAVAGE 99DL, .358 WINCHESTER 88 Barrel Diameter 4-1/4" ahead of Receiver .712
two sights with red fiber optic rods for REMINGTON 510, 511, 512 Barrel Diameter 4-1/2" ahead of Receiver .800
mounting directly on the barrel. Also Barrel Diameter 4-1/4" ahead of Receiver .740 Barrel Diameter 22" ahead of Receiver
Height of Factory Ramp and Bead above Barrel
.575
.550
Barrel Diameter 20" ahead of Receiver .575 Height of Military Front Sight above Barrel .740
included are two rear dovetail sights and two sets of six inch long, Height of Factory Ramp and Bead above Barrel .298
Height of Factory Ramp and Bead above Barrel .510 FP-SMLE or
5D-SMLE - 7/16" .312 656
fiber optic rods for replacement and repair. Aluminum, rear sights 5D-510 - 3/16" .281 .375
FP-99S
WGOS-M
- 3/8" .260 .542
3/16" 5/16" .281 .500
FP-88 - 5/16" .312 .531 WGOS-S 1/4" 5/16" .312 .531
with eye-grabbing, green, fiber optic dots really stand out in low WGOS-2 or M 3/16" 9/32" .281 .469 WGOS-M 1/4" 3/8" .281 .563
WGOS-M
WGOS-M
3/16" 5/16" .312 .531
3/8" 7/16" .345 .689
WGOS-S 3/8" 7/16" .312 .656
light. They fit 3/8" dovetails and feature screw adjustment for eleva- WGOS-S or M 1/4" 5/16" .312 .531 WGRS-100 - 3/8" .312 .594
#4 SMLE
tion. Kit saves you approximately 50% over buying single beads. A REMINGTON 550 SAVAGE 99E (old style) Barrel Diameter 4-1/4" ahead of Receiver .775
Barrel Diameter 3-3/4" ahead of Receiver .870 WINCHESTER 94, .30-30, .32 WIN. Barrel Diameter 22" ahead of Receiver .630
perfect, money-saving kit for your shop. Barrel Diameter 4-1/4" ahead of Receiver
.730
.607 Barrel Diameter 22" ahead of Receiver .585 Barrel Diameter 4" ahead of Receiver .745 Height of Military Front Sight above Barrel .770
SPECS: Front Sights: Blued steel body. Red fiber optic rods. Seven (7).250" Height of Factory Front Sight above Barrel .258 Height of Factory Ramp and Bead above Barrel .500 Barrel Diameter 18-1/2" ahead of Receiver .600
FP-SMLE or
(6.3mm) and (7) .340" (8.6mm) wide sights to fit narrow and medium WGOS-S or M 3/16" 9/32" .281 .469 FP-99S - 9/32" .312 .500 FP-94 or
5D-SMLE - 7/16" .312 .656
WGOS-M 1/4" 5/16" .312 .531
front sight bases (14 total). Heights: .260", .290", .312", .343", .375", .406", WGOS-L 3/16" 3/8" .260 .542 5D-94-36 - 5/16" .260 .479 WGOS-M 3/8" 7/16" .312 .656
and .450". Two (2).531" (13.5mm) sights to fit directly in a dovetail on REMINGTON 552-572 BDL WGOS-S/M 3/16" 9/32" .281 .469
Barrel Diameter 4" ahead of Receiver .740 #5 SMLE
the barrel. Heights: .538" and .570". Rear Sights: Aluminum, black matte. Barrel Diameter at Muzzle .625 SAVAGE 99F, .308
Barrel Diameter 4-1/2" ahead of Receiver .665 Barrel Diameter 4-1/4" ahead of Receiver .717
Green fiber optic rod. 21/2" (6.35cm) long. Replacement Rods: 6" (15.2cm) Height of Factory Ramp and Bead above Barrel .570
WINCHESTER 100, . 243, .308 Barrel Diameter 20-1/2" ahead of Receiver .750
Barrel Diameter 4-1/4" ahead of Receiver .785 OD of Flash Hider Should be Cut to 750
long. Two (2) 0.060" (1.4mm) diameter orange rods, two (2) 0.040" (1mm) FP-740 AP - - - .570 Barrel Diameter 20" ahead of Receiver .560 Height of Military Front Sight above Barrel .770
5D-572 - 9/32" .281 .469 Height of Factory Ramp and Bead above Barrel .440
diameter yellow rods. WGRS-54 - - - .570 FP-99S - 3/8" .260 .542
FP-SMLE or
WGOS-S 1/4" 3/8" .281 .563
#962-000-064AT Williams Fire Sight Assortment Kit, WGOS-M
WGOS-M
1/4" 9/32" .312 .500
5/16" 3/8" .312 .594
FP-88
WGOS-M
- 5/16" .260 .479
3/16" 5/16" .281 .500
5D-SMLE
WGOS-S
- 9/32" .260 .448
1/4" 3/16" .345 .439
2F127G26 �� $ 134.99 SAVAGE 99R, 99EG, .300 SAVAGE WGOS-M 3/8" 7/16" .345 .689 WGOS-S 5/16" 9/32" .312 .500
REMINGTON 572 Barrel Diameter 3-3/4" ahead of Receiver .875 WGRS-100 - 3/8" .345 .627
Barrel Diameter 3-1/2" ahead of Receiver .755 ’03 SPRINGFIELD
FIRE SIGHT HOOD - Protects front blade from those Barrel Diameter 21-1/2" ahead of Receiver .619
’03 Barrel Diameter 4-1/4" ahead of Receiver .930
damaging accidental bumps. Open top allows plen- Height of Factory Front Sight above Barrel .326
MILITARY RIFLES Barrel Diameter 22" ahead of Receiver .660
FP-99S - 9/32" .260 .448 Height of Military Front Sight above Barrel .747
ty of light to reach the fiber optic rod. Fits Williams FP-740 AP - 3/16" .312 .406 WGOS-L 3/16" 5/16" .312 .531 30 CARBINE
Streamlined Dovetail Ramps. WGOS-M
WGOS-M
3/16" 9/32" .281 .469
3/16" 3/16" .375 .469
Barrel Diameter 2-1/2" ahead of Receiver .700 FP-’03 or
Barrel Diameter 18" ahead of Receiver .575 5D-JEMS - 9/16" .260 .729
SPECS: Steel, blue. .630" (16mm) diameter. 1" (2.5cm) long. SAVAGE 110 Height of Military Front Sight above Barrel .450 WGOS
REMINGTON 580, 581, 582, .22 Barrel Diameter 3-1/4" ahead of Receiver .775 Special 3/16" 7/16" .312 .656
#962-000-016AT Fire Sight Hood, 2F9P12��$ 9.99 Barrel Diameter 3" ahead of Receiver .625 Barrel Diameter 19-1/2" ahead of Receiver .575 WGRS-M1-CAR - 9/32" .312 .500 WGOS
Barrel Diameter 23" ahead of Receiver .625 Height of Factory Ramp and Bead above Barrel .600 FP-30-M1 - 3/16" .260 .354 Special 5/16" 9/16" .281 .751
WGOS REPLACEMENT REAR SLIDE/BLADE - Fits all standard Height of Factory Front Bead above Barrel .450
FP-110 - 7/16" .260 .605
Military Rear
WGOS-S
- 9/32" .260 .448
1/4" 3/16" .312 `.406
751
Williams adjustable, rear guide open sights. Aluminum blade con- WGRS-54 - 9/32" .312 .500 WGOS-M 1/4" 3/8' .281 .563 WGOS-S 5/16" 9/32" .281 .469 ’03-A3 SPRINGFIELD
WGOS-S 3/16" 3/16" .312 .406 WGOS-M 5/16" 7/16" .281 .625 ’03-A3 Barrel Diameter 4-1/4" ahead of Receiver .900
tains two, green, fiber optic dots; use with existing factory front or WGOS-S 1/4" 9/32" .312 .469 Barrel Diameter 22" ahead of Receiver .600
choose a replacement Fire Sight Rifle Bead listed above. 1917 ENFIELD Height of Military Front Sight above Barrel .820
SPECS: 1/4" and 5/16" height only. REMINGTON 700, 725 SAVAGE 340 Barrel Diameter 4-1/4" ahead of Receiver .890
Barrel Diameter 5-1/4" ahead of Receiver .790 Barrel Diameter 3-1/4" ahead of Receiver .820 Barrel Diameter 22" ahead of Receiver .655 FP-’03-A3 or
’03-A3 - 9/16" .312 .781
#962-602-180AT 1/4" Fire Sight WGOS Slide/Blade, Barrel Diameter 20" ahead of Receiver
.590
.685
.600
.475
Height of Military Front Sight above Barrel .780
WGOS
2F19Q66�� $ 20.99 FP-17 or Special 5/16" 9/16" .312 .781
FP-70, 5D-70 - 3/8" .281 .563 FP-340 - 5/16" .312 .531 5D-JEMS - 7/16" .375 .719 WGOS
#962-602-190AT 5/16" Fire Sight WGOS Slide/Blade, WGOS-M or L 1/4" 3/8" .281 .563 WGOS-M 3/16" 9/32" .345 .533 WGOS-L 1/4" 3/8" .281 .563 Special 3/8" 9/16" .345 .815
WGRS-’03-A3 - 9/16" .345 .814
2F19I66 �� 20.99 WGOS-M or L 3/8" 7/16" .345 .689 WGOS-M 3/16" 5/16" .312 .531 WGOS-L 3/8" 7/16" .375 .719
WILLIAMS BLADES & BASES FOR WILLIAMS
“WGOS” & “WDOS” SIGHTS FOOLPROOF & 5D RECEIVER SIGHTS
FOOLPROOF TARGET KNOBS - All Foolproof 5D RECEIVER SIGHT - Same depend-
Dependable, Accurate Sights - Available For Most Guns sights (except TK models) use the Short Eleva- able, accurate construction as the Fool-
Assemble Complete Sights tion Knob. The Long Elevation Knob is for use Target
proof models but without micrometer
FOOLPROOF RECEIVER SIGHTS - Internal Knob
Or Replace Blades with Foolproof-TK target sights. † indicates adjustments. Windage and elevation ad-
To Change Sight Picture micrometer adjustments lock positively to Short Windage Knob, †† indicates Long Wind- justments are easily made by loosening
prevent accidental movement of sight set- age knob. The Elevation Gib Lock Knob fits screws, moving the sight, and re-tight-
Precision-made sight bases ting. No obstructions to impair and blot out both standard Foolproof and Foolproof-TK ening the screws. Excellent for hunting
shooter’s field of vision. Weighs only 11/2 Gib Lock
and blades milled from high-tensile models. ab Knob rifle applications that don’t require regular
strength, rustproof alloy. Dovetailed oz. Standard hole spacing to fit guns fac- tweaking of the sight adjustment settings.
windage and elevation adjustments tory drilled and tapped for receiver sight. #962-157-520AT Target Windage Knob, Long,
2F6K33�� $ 6.99 Stop screw provides an accurate guide, so the 5D sightwill return
have hardened gib locks. Make ad- Foolproof features adjustment screws to absolute zero upon detaching and reattaching to the gun. Stan-
justments quickly by loosening one U-Notch Sq.-Notch for windage and elevation. Foolproof-TK #962-157-530AT Target Windage Knob, Short, dard hole spacing for easy, secure mounting.
screw. No dovetailing of barrel neces- comes equipped with target knobs. 2F6I33 �� 6.99 SPECS: Aluminum, black, anodized. Steel screws. Advise Stock # from
sary. Bases and blades sold separately. Blades can also replace the SPECS: Alum., black, anodized. Steel screws. See chart below. #962-157-240AT Target Elev. Knob, Long, 2F7J23�� 7.99 chart below.
aperture on WGRS sights. a b — Advise # — Foolproof-TK Sight, 2F68B13�� $ 71.99 #962-157-250AT Target Elev. Knob, Short, 2F7A23 �� 7.99 — Advise # — 5-D Sight, 2F35I52�� $ 36.99
SPECS: Bases and blades: aluminum, black anodized finish. Bases - All — Advise # — Foolproof Sight, 2F60L56�� 63.99
models except the One Inch have .5625" c-to-c hole spacing. Small - #962-000-079AT Elevation Gib Lock Knob, 2F7H03�� 8.99
.347" radius, fits .660" to .730" dia. barrels Medium - .395" radius, fits .730" STK# STK# STK# STK# STK# STK#
to .830" dia. barrels. Large - .440" radius, fits .830" to .930" dia. barrels. X- Fits FOOLPROOF-TK MODEL 5D MODEL FOOLPROOF MODEL Fits FOOLPROOF-TK MODEL 5D MODEL FOOLPROOF MODEL
Large - .5625" c-to-c hole spacing .475" radius, fits .900" to 1" dia. barrels.
AIRGUN #962-000-046AS 046 FP- NA NA RUGER continued
One Inch - 1" c-to-c hole spacing, .500" radius, fits 1" dia. barrels. 26mm
AG-TK Mini-14 Ranch #962-000-077AS FP-11/87-TK NA NA
- .550" radius, fits 1" to 1.1" dia. barrels. Blades available in 3/16" (4.8mm), 1/4"
(6.3mm), 5/16" (7.9mm), and 3/8" (9.5mm) heights. Range of adjustment for BENJAMIN, 340, 342, NA #962-150-790AS 5D-SH NA SAKO FINNWOLF NA NA #962-200-088AS FP-88/100 ††
each listed in table below. 347 (need higher front SAVAGE (See Stevens) NA NA #962-200-099AS FP-99S †
WGOS/WDOS BASES sight) 99
BRNO w/out d’tail #962-000-041AS FP-98-TK NA #962-200-098AS FP-98 †† 99DL-w/tang safe NA NA #962-200-099AS FP-99S †
STOCK # FOR SIGHT FITS BARREL DIAMETER
receiver 110 #962-000-042AS FP-110-TK NA NA
#962-600-000AT WGOS Small, .660" - .730" dia.
BROWNING, B-92 #962-000-039AS FP-94/36-TK NA #962-200-036AS FP-94/36 † SEARS Centerfire Lever #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 †
#962-607-000AT WGOS Medium, .730" - .830" dia.
BLR NA NA #962-200-072AS FP-71 †† SHERIDAN, Model C NA #962-150-790AS 5D-SH NA
#962-608-000AT WGOS Large, .830" - 930" dia.
BPS #962-000-077AS FP-11/87-TK NA NA SHOTGUNS NA #962-150-123AS 5D-12/37 NA
#962-611-000AT WGOS X-Large, .900" - 1" dia., .5625" c-to-c
DAISY, 99 & 299 NA #962-150-770AS 5D-JEMS NA Pump/Flat Rec’s
hole spacing
ENFIELD 1917 & Br 14 NA #962-150-770AS 5D-JEMS NA SPRINGFIELD ’03 NA #962-150-770AS 5D-JEMS NA
#962-609-000AT WGOS One Inch, 1" dia., 1" c-to-c hole spacing
HIGGINS, 30/30 Lever #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 † STEVENS 300 series NA NA #962-200-340AS FP-340 †
#962-626-000AT WGOS 26mm, 1" - 1.1" dia.
HUSQVARNA w/out #962-000-041AS FP-98-TK NA #962-200-098AS FP-98 †† 620 NA #962-150-123AS 5D-12/37 NA
— Advise # — WGOS Base, 2F17P61�� $ 18.99 d’tail receiver THOMPSON/CENTER NA NA #962-200-860AS FP-T/C ††
#962-400-000AT WDOS Base, 2F11L10�� $ 11.99 ITHACA M-37 NA #962-150-123AS 5D-12/37 NA Contender
JAP TYPE 38 & 99 NA #962-150-770AS 5D-JEMS NA Hawken/Renegade NA NA #962-200-815AS FP-Hawken
BLADE HEIGHT & RANGE OF ADJUSTMENT
MARLIN, A-1 NA #962-150-081AS 5D-81 NA ††
BLADE TOTAL SIGHT HEIGHT
HEIGHT On WGOS Base* On WDOS Base 30-30 #962-000-039AS FP-94/36-TK NA #962-200-036AS FP-94/36 † WINCHESTER 9422 NA #962-150-094AS 5D-94/36 #962-200-810AS FP-GR ††
3/16" .369" (9.4mm)-.431" (10.9mm) .281" (7.1mm)-.345" (8.8mm) 36 #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 † 05, 07 & 10 NA NA #962-200-072AS FP-71 ††
1/4" .431" (10.9mm)-.493" (12.5mm) .345" (8.8mm)-.406" (10.3mm) 336 #962-000-062AS FP-336-TK #962-150-001AS 5D-336 #962-200-002AS FP-336 † 12, 1200, 1400 NA #962-150-123AS 5D-12/37 NA
5/16" .493" (12.5mm)-.555" (14.0mm) .406" (10.3mm)-.468" (11.9mm) 39A #962-000-036AS FP-39-TK NA #962-200-039AS FP-39 † 12-25 NA #962-150-123AS 5D-12/37 NA
3/8" .555" (14.0mm)-.617" (15.7mm) .468" (11.9mm)-.531" (13.5mm) 39A* #962-000-070AS FP-39-TKTM NA #962-000-069AS FP-39-TM 55 & 65 #962-000-039AS FP-94/36-TK NA #962-200-036AS FP-94/36 †
56, 57, 62 NA NA #962-200-088AS FP-88/100 †† 64 & 94 #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 †
#962-350-118AT Square Notch Blade, 3/16", 2F9G06 ��$ 9.99 80, 81 NA #962-150-081AS 5D-81 NA 71, Win/Brwg 1895 NA NA #962-200-072AS FP-71 ††
#962-350-218AT U-Notch Blade, 3/16", 2F8Q43�� 8.99 94 #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 † repro.
#962-350-225AT U-Notch Blade, 1/4", 2F8Q43�� 8.99 93 #962-000-039AS FP-94/36-TK NA #962-200-036AS FP-94/36 † 86, Win/Brwg 1895 NA NA #962-200-072AS FP-71 ††
#962-350-231AT U-Notch Blade, 5/16", 2F8F43�� 8.99 99 Auto Load NA NA #962-200-088AS FP-88/100 †† repro.
#962-350-237AT U-Notch Blade, 3/8", 2F9F06�� 9.99 .44 Mag & 44 #962-000-039AS FP-94/36-TK #962-150-094AS 5D-94/36 #962-200-036AS FP-94/36 † 88 NA NA #962-200-088AS FP-88/100 ††
MAUSER 98 #962-000-041AS FP-98-TK #962-150-770AS 5D-JEMS #962-200-098AS FP-98 †† 94 Angle Eject #962-000-040AS FP-94SE-TK #962-150-195AS 5D-94SE #962-200-194AS FP-94SE †
REMINGTON 11-48 NA #962-150-123AS 5D-12/37 NA Big Bore NA NA #962-200-094AS FP-94/375 †
31 NA #962-150-123AS 5D-12/37 NA 100 Auto NA NA #962-200-088AS FP-88/100 ††
WILLIAMS 48, 58, 11-48 NA #962-150-123AS 5D-12/37 NA 150 & 190 NA #962-150-123AS 5D-12/37 NA
700 Left Hand NA #962-150-770AS 5D-JEMS NA 241 #962-000-039AS FP-94/36-TK NA #962-200-036AS FP-94/36 †
ONE-PIECE FIRE SIGHT RAMP 870, 1100, 11-87 #962-000-077AS FP-11/87-TK #962-150-123AS 5D-12/37 NA 250-255, 270-275, 290 NA #962-150-123AS 5D-12/37 NA
Replaces Fragile, Plastic Ramps With RUGER 10/22 & 44 #962-000-050AS FP-RU-TK NA NA WEATHERBY, Mk V #962-000-041AS FP-98-TK NA #962-200-098AS FP-98 ††
Sturdy, One-Piece Metal Mag *Mounts in rear scope mount holes. †Short windage knob. ††Long windage knob.
No need to worry about breaking a sight

ramp when you’re busting through heavy
brush. Solid, one-piece, CNC machined
aluminum ramp attaches with one 6-48 screw and gives you a
bright, glowing, sight picture. Fire red, fiber optic rod glows brightly
using only available, natural light for high visibility. a b SHOP ONLINE AT BROWNELLS.COM
SPECS: CNC machined aluminum, black. Fire red fiber optic rod. #70105
- height = .410", fits barrel dia. of .625"; #70220 - height = .485", fits bar-
rel dia.of .875"; #70678 - height =.634", fits barrel dia.of .650". Gunsmith
Search by category, keyword, stock #, firearm make or model.
installation recommended. Narrow your results by highest rated, most popular, USA made & more!
#962-000-065AT #70105 Fire Sight Ramp, 2F15C13��$ 15.99
#962-000-066AT #70220 Fire Sight Ramp, 2F15D13�� 15.99 Read reviews, see additional product photos, watch videos, all online.
#962-000-067AT #70678 Fire Sight Ramp, 2F15P13 �� 15.99
order on the web

WILLIAMS WILLIAMS RIFLE WILLIAMS
drift adjustable for wind-
“WGRS” RECEIVER SIGHT FIRE SIGHT REAR SIGHT & SETS MUZZLELOADER FIRE SIGHT
age; has two, green, fiber
optic dots. Front has red,
• Easily Installed • Compact Upgrade Your Factory Sights With Easy-To-See, Fiber Optics Fast, Accurate Sighting
fiber optic rod. FP sight sets
• Rustproof • Low Profile have a Foolproof, micro- For All Light Conditions
All sets feature a bright red, fiber optic, front sight and fully ad-
• Lightweight • Positive justable peep or U-notch, rear sight. U-notch, rear sight sets use adjustable, peep sight and Contrasting red front
Windage & Elevation the highly accurate, 3-dot pattern with two green, fiber optic dots red, front Fire Sight. Peep and green rear, fiber optic
Adjustments at the rear for sharp contrast and quick sight acquisition in all light mounts to existing holes dots offer quick sight alignment; won’t wash out in bright light, im-
conditions. No drilling or tapping required for most rifle models. in top or side of receiver, prove contrast in low light. Fully adjustable, “U”-notch, rear sight
In most cases, these sights Dovetailed front and rear sights may require minor fitting. a b depending on model. gives precise alignment for long range shots. Replaces factory sights
utilize dovetail or existing WGRS-336 includes a with only minor fitting. Machined from aircraft aluminum for years
REMINGTON FIRE SIGHTS - Fiber optic, U-notch, rear sight at- compact, low profile, peep of service. a
screw holes on top of receiver b
taches to the factory, rear sight and red, front Fire SPECS: Aluminum body, black, matte finish. Bead - .058" (1.2mm) di-
to give guns the advantage of peep sights. a b
sight ramp to improve vis- Sight. Fully adjustable peep mounts to the rear scope mount holes ameter, .89" (22.6mm) long. TC - Thompson Center. Octagon model
SPECS: Aluminum, black, anodized. Peep height is approximately the
ibility; adjusts for windage for easy installation. fits newer guns with .836", c-to-c hole spacing. Knight Fire Sight fits all
same as a 3/16" (4.8mm) Open Sight Blade.
and elevation. Contrast- SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin models without Williams factory rear sight. Knight Mk-85 fits models with
ing, red, front sight really lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and factory installed Williams rear sight. May require minor fitting. Remington
STOCK # MODEL FITS stands out for fast pickup models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not sets are available with a standard notch rear sight or a .15" (3.8mm) di-
#962-100-037AT WGRS-37 Ithaca 37, Rem. 870/1100/11-87 and alignment. 2003 & Earlier fits Remington rifles and muzzle- fit Win. 94/22. Requires two holes in the left side of the receiver and will ameter ghost ring rear sight. Models to fit 2003 & Earlier muzzleloaders
shotguns (drilling/tapping req’d) loaders with dovetailed, front sight ramps, plus all Remington shot- require drilling and tapping on the newer guns. FP-94SE fits Win. 94 angle with 3/8" dovetail front sight ramps or 2003 & Later muzzleloaders with
#962-100-044AT WGRS-44 Ruger® 44; use .500 to .560 front guns. 2003 & Later fits Remington rifles and muzzleloaders manu- eject, except Big Bore models. FP-336 fits Marlin 36, 336, 1894, 1895 and 1-piece ramped front sights.
sight factured from 2003 to present with 1-piece, ramped front sights. 444. Attaches to the top of the receiver and bolts up to factory drilled and
SPECS: Aluminum, black anodized. tapped holes. WGRS-336 fits Marlin 336, 444, 44 and 1895. STOCK # FITS PRICE
#962-100-022AT WGRS-RU-22 Ruger 10/22®; use .500 to .570 front
#962-565-300AT Remington Fire Sights, 2F23F49�� $ 24.99 #962-602-170AT Dovetail Fire Sights, 2F31M39�� $ 33.99 #962-622-550AT CVA Octagon Barrel 2F30I25 $ 31.99
#962-100-054AT WGRS-54 Sav-Ans 54, 64, 141, 141M, 153,
#962-000-056AT 2003 & Later Rem. Fire Sights, #962-633-310AT FP- 94/36 Fire Sights, 2F65G93 �� 69.99 #962-000-054AT CVA Round Barrel 2F30F25 $ 31.99
153S; Rem 541S, 552BDL, 572BDL; 2F23N49�� 24.99
Win 310, 320. Can be fitted to most #962-000-057AT FP- 94SE Fire Sights, 2F65F29�� 68.99 #962-000-055AT CVA Optima/Optima Pro 2F30F25 $ 31.99
dovetailed receiver .22’s REMINGTON GHOST RING FIRE SIGHTS - Bright, high #962-000-059AT FP- 336 Fire Sights, 2F65B93�� 69.99 #962-622-560AT TC Octagon Barrel 2F30I25 $ 31.99
#962-100-070AT WGRS-70 Post-war Win 70 (ex .375), 670, 770 contrast fiber optic sights with large aperture, rear #962-000-058AT WGRS-336 Fire Sights, 2F39I33 �� 41.99 #962-622-570AT TC New Englander 2F30E25 $ 31.99
#962-100-700AT WGRS-700 Remington 700, 721, 722 ghost ring provide fast, accurate sight alignment in #962-622-580AT Knight Fire Sight 2F37Q81 $ 39.99
all light conditions. The more light, the brighter 5D LEVER ACTION FIRE SIGHTS -
#962-100-742AT WGRS-742 Rem 742ADL, 760ADL; For BDL’s Dependable Williams 5D peep sights #962-565-300AT Rem 2003 & Earlier, Notch 2F23L49 $ 24.99
the beads glow. Front sight has a single red
use FP-740AP Foolproof insert, rear ghost ring has two green inserts without micrometer adjustments fit #962-000-056AT Rem 2003 & Later, Notch 2F23M49 $ 24.99
#962-100-740AT WGRS-7400 Rem 4, 7400, 6, 7600 to form an easy-to-align, 3-dot sight Winchester Angle Eject and Marlin #962-000-083AT Rem 2003 & Earlier, G. Ring 2F24B42 $ 25.99
#962-000-019AT WGRS-336 Marlin 336 picture. 2003 & Earlier fits Reming- centerfire lever actions that are drilled #962-000-084AT Rem 2003 & Later, Ghost Ring 2F24D42 $ 25.99
ton rifles and muzzleloaders with and tapped for scope mounts. Highly #962-622-600AT Traditional Lightning Fire, Buck- 2F30D25 $ 31.99
#962-100-750AT WGRS-BAR Browning sporting Hi-Power auto visible red front fire sight is correct
3
/8" dovetail front sight ramps, plus hunter, Timberridge & Cabela’s
rifle and lever all Remington shotguns with 3/8" height for ramped barrels.
#962-100-760AT WGRS-FN Any FN Mauser (and others) w/ 1/2" dovetail front sight ramps. 2003 SPECS: Aluminum, black anodized. Steel screws and aperture.
hole spacing & Later fits Remington rifles and #962-000-099AT Winchester 5D Fire Sight Set,
#962-100-001AT WGRS-M1-Carb. Dovetail on .30 M1 Carbine muzzleloaders manufactured 2F47I39 �� $ 51.95
#962-100-158AT WGRS-HR H&R Topper/Handi-Rifles & from 2003 to present with 1-piece, ramped front sights. Both sets
Ruger Mk II pistols (drilling/tapping
include front and rear sights. MARLIN RIMFIRE FIRE SIGHTS - Dovetail sights replace the fac- WILLIAMS
SPECS: Black, matte finish. Fiber optic insert. Bead - 1/16" (1.6mm) dia. Ghost tory open sight sets on your
required) Ring - .15" (3.8mm) dia. aperature. 2003 & Earlier - Steel front 3/8" dovetail Marlin rimfire. U-shaped, STREAMLINED DOVETAIL RAMP
#962-100-085AT WGRS-KN Knight MK-85 Modern Muzzle- sight. Aluminum rear sight. 2003 & Later - Aluminum front ramp sight and green, fiber optic, rear sight
contrasts well with the red, Long & Graceful
loader rear sight; includes steel 6-48 tpi front mounting screw.
#962-100-003AT WGRS-DISC Knight DISC, Browning T-Bolt #962-000-083AT 2003 & Earlier Ghost Ring Fire Sights, front bead. Adjustable for Polished and Blued Steel.
2F24E42�� $ 25.99 windage and elevation. Screw-on models have two
#962-100-086AT WGRS-Legend Modern Muzzleloading Legend & SPECS: Aluminum, black anod-
Wolverine, fits factory holes #962-000-084AT 2003 & Later Ghost Ring Fire Sights, attaching screws, one under sight and one on ramp. Hole spacing
ized. Model 60 also fits 915Y, on Remington model matches factory drilled and tapped barrels. a b
#962-100-751AT WGRS-CVA CVA Apollo, Traditions, Deerhunter 2F24C42 �� 25.99 925, 925M, 981T, and 983T. SPECS: Fractional height listed in table is the overall ramp height mea-
and others w/octagon bbl or RUGER® 10/22® FIRE SIGHTS - High #962-000-061AT Marlin 25N/25NM Fire Sights, sured from top of barrel to top of ramp. Decimal height listed is measured
receiver visibility, fast to pickup, sight systems 2F22F70��$ 23.99 from top of barrel to bottom of dovetail. Width of ramp is .250" (6.3mm).
#962-000-027AT WGRS-CVA Rnd CVA with round barrel, Win. X-140 for the Ruger® 10/22®. WGRS features #962-000-092AT Marlin 60 Fire Sights, 2F25I61�� 29.99 Supplied without hood.
#962-100-143AT WGRS-Mini 14/30 Mini-14® Ranch Rifle & Mini Thirty® low profile, guide receiver, peep sight
and red, fiber optic, front sight. 3-Dot WGOS REPLACEMENT SLIDE/BLADE - STOCK # HEIGHT STYLE PRICE
#962-100-770AT WGRS-M/L Muzzleloader with octagon barrels Rear slide/blade combo fits all standard #962-020-097AT 3
/16" (.0975") Screw-On 2F22C80 $ 23.99
has U-notch rear blade with green
#962-100-775AT WGRS-TC T/C Contender dots, red front sight. Adjustable for size, Williams, adjustable, rear guide, open #962-020-344AT 7
/16" (.3445") Screw-On 2F22H00 $ 22.99
#962-000-015AT WGRS-TC T/C Encore windage and elevation. sight bases. Converts traditional, rear iron #962-020-469AT 9
/16" (.4695") Screw-On 2F22P00 $ 22.99
#962-100-002AT WGRS-Black T/C Black Diamond SPECS: Aluminum, black anodized. Front - sights into Fire Sights. Aluminum blade
contains a single, U-shaped, green, fiber #962-021-282AT 3
/8" (.2820") Remington 2F22Q80 $ 23.99
Diamond .530" high, 1/16" red fiber optic bead. Fits Ruger 10/22 only.
#962-633-300AT WGRS-RU22 Fire Sights, 2F39K33��$ 41.99 optic rod for 2-dot accuracy. Use with ex- #962-026-000AT Streamlined Ramp Hood, 2F6I51 �� $ 6.99
#962-000-068AT WGRS-Savage Savage 110 Accu-trigger (round isting factory front sight or with fiber optic,
receiver) (for use w/538M bead) #962-602-130AT 3-Dot Ruger Fire Sights, 2F18P96�� 19.99 Williams Rifle Sight Bead found elsewhere in catalog. Available in
— Advise # — Guide Receiver Sight, 2F33D61�� $ 35.99 BROWNING LEVER ACTION FIRE SIGHTS - Bright, easy-to-see, three heights.
U-notch, rear sight improves sight ac- SPECS: Aluminum, black anodized. 3/16" (4.8mm), 1/4" (6.4mm), and 5/16"
RUGER FRONT/REAR SIGHT SET - A WGRS rear sight and .570" quisition during periods of low light. (7.9mm) high. sition in all light conditions. Ring aperature
high gold bead front makes a fast system for Ruger carbines. Excellent for hunting or target shooting. #962-000-081AT 3/16" WGOS Slide/Blade, 2F19M66�� $ 20.99 naturally centers to draw the eye to the front
SPECS: Aluminum, black anodized. Front - 1/16" gold bead, .570" high. Green rear and contrasting red delivers #962-602-180AT 1/4" Fire Sight WGOS Slide/Blade, sight for faster target acquisition and improved
#962-445-650AT WGRS-RU-22 Set, 2F39Q96 �� $ 41.99 a fast, accurate, 3-dot, aiming system. 2F19H66 �� 20.99 accuracy. Fully adjustable for windage and el-
SPECS: Aluminum, black anodized. Fits #962-602-190AT 5/16" Fire Sight WGOS Slide/Blade, evation. Rugged, low-profile aluminum sight
GHOST RING APERTURE - Use with WGRS-37 Browning BLR. has an anodized finish for resistance against
2F19C66 �� 20.99
for a fast sight picture on combat and slug- scratches. Use with existing factory front sight
#962-000-020AT BLR Fire Sights, 2F29I01�� $ 30.99
shooting shotguns. WGOS REPLACEMENT SLIDE/GHOST RING - Rear slide/ghost or with fiber optic, Williams Rifle Sight Bead found elsewhere in
SPECS: Aluminum, black anodized. .195" (4.9mm) MARLIN & WINCHESTER LEVER ACTION FIRE SIGHTS - For Marlin ring sight fits all standard size Williams adjustable rear guide open catalog.
diameter aperture. and Winchester lever action rifles. Dovetail replaces factory front sight bases. Features a large light gathering ghost ring with two SPECS: Aluminum, black anodized. 1/4" (6.4mm) high. Aperature - 5/32" (3.9mm) I.D.
#962-100-901AT Ghost Ring Aperture, 2F4C77�� $ 5.95 and rear sights. Rear sight is screw adjustable for elevation and green, fiber optic dots for sharp contrast and quick sight acqui- #962-000-082AT 1/4" WGOS Slide/Ghost Ring, 2F7G54�� $ 7.99
WILLIAMS XS SIGHT SYSTEMS AK-47 XS SIGHT SYSTEMS LEVER ACTION SMITH ENTERPRISE M-95
GROOVED RECEIVER FOOLPROOF TRITIUM EXPRESS SIGHT SET APERTURE REAR & FRONT SIGHT SETS LONG RANGE SIGHT
Fits All Grooved Receiver .22’s Big Dot Front Sight Puts Combines The Accuracy Of Authentic Cowboy Action Look;
You On Target Fast; Fully Aperture Sights With The Great For Long Distance Shooting
Adjusts to fit any .22 with a receiver
groove that measures .300" to .600" Adjustable Rear Sight For Speed Of Open Sights Versatile, CNC-machined, steel sight
wide. No drilling, tapping or modifica- Improved Accuracy lets you shoot both long and short dis-
Easy-to-see post front and
tions required. Internal micrometer High visibility sight com- ghostring rear get you on target tances. Flipped up, the ladder adjusts from
adjustments with positive clicks. Lock- bination easily replaces the fast for brush hunting and action 100-1100 yards; flipped down, the flat top,
screws secure adjustments against ac- factory sights on your AK-47 or variant for fast sight acquisition in shooting. All steel construction, front/rear sets provide the correct V sight provides fast target acquisition for
cidental change. Mounts low but may high stress or low light conditions. Machined steel set includes an front sight for each model, eliminating the guess work of choosing short shots. Ball detents provide an audible and felt click for each
require a higher than standard front adjustable white stripe, V-notch rear sight and a genuine Trijicon sights. Easy-to-install, fully machined to fit existing rear scope base graduation on the ladder. Fits rifles with a 3/8" dovetail. ab
sight. a
b brand titrium lamp with large white ring for the front. Front sight and front sight holes/dovetails. Windage and elevation adjustable SPECS: Steel, black oxide finish. 21/8" (5.4cm) long. Ladder provides 123/64"
SPECS: Aluminum , black, anodized body. Bright steel “standard style” completely replaces the factory windage drum and front sight post. with dual set screws. Modified post front sight with vertical white line (3.4cm) height adjustment. Fits rifles with a / " (9.5mm) dovetail.
3
8
windage and elevation screws. Blue steel aperture. FP-GR 13/4" (4.4cm) Large, single setscrew in the tangent rear sight provides fine adjust- insert provides excellent target contrast, is quick to pick up in all light #851-000-046AT M-95 Long Range Sight, 1E146G40�� $ 169.99
wide. 121/32" (4.2cm) high. Weighs 11/4 oz. (35 g). .0093" (2.4mm) aper- ments for elevation; dual setscrews in the dovetailed rear V-notch conditions. Includes .191" and .230" I.D. apertures. a b
ture opening. FP-GR-TK: 25/32" (5.5cm) wide. 15/8" body. Blue steel “Target block securely lock-in your windage settings. Includes installation SPECS: Rear – Steel, blue, matte finish. Win. 92 and Win. 94 Top Eject
Knobs” adjust windage and elevation. .093" (2.4mm) aperture opening. tools, thread locking agent, and detailed instructions. a b require drilling and tapping of receiver. Front - Steel, blue, matte finish.
#962-201-606AT Foolproof FP-GR-TK, 2F68I13�� $ 71.99 SPECS: Steel, black, matte finish. Front Sight - .160" (4.1mm) diameter Fits .250" or .340" wide front bases or nominal 3/8" dovetail, as noted. Post
white ring with .075" (1.9mm) diameter tritium lamp. Rear Sight - .140" - .100" (2.7mm) wide with .030" (.76mm) wide stripe.
SMITH ENTERPRISE
(3.6mm) high vertical white stripe. Fits AK-47 and clones.
STOCK # FITS
FLIP-UP REAR SIGHT
#006-000-161AT AK-47 Tritium Express Set,
SMITH ENTERPRISE 6K108L51�� $ 117.00 #006-000-140AT Marlin 336 w/ 3/8" dovetail barrel Two Sight Pictures In One
WESSON & HARRINGTON #006-000-141AT

#006-000-143AT
Marlin 1895SS, 444SS w/ 3/8" dovetail barrel
Marlin 39A ,w/ .250" & .340" wide front base
Machined from bar stock with integral
spring base. Flip it down, it’s a fast pointing
LONG RANGE SIGHT #006-000-144AT Win. 92, 94 Angle Eject Big Bore w/dovetail barrel Buckhorn sight; flip it up, it’s an elevator for long range shooting.
#006-000-145AT Win. 94 w/ 20-24" dovetail barrel Use on blackpowder cartridge rifles at ranges from 500 to 800 yards
Extremely Versatile Buckhorn Sight; XS SIGHT SYSTEMS RIFLE with .45-70 and other straight-walled cartridges. a b
#006-000-147AT Win. 94 Trapper w/ dovetail barrel SPECS: Steel, blued, matte finish. Fits nominal 3/8" dovetails. 21/4" (5.7cm)
Sight, Base & Screws, All-In-One
Precision-machined, buck-
APERTURE REAR SIGHT — Advise # — Aperture & Post Sight Set, 6K79J09�� $ 85.50 long. Provides 1.75" (4.4cm) total sight elevation.
#851-000-026AT Flip-Up Rear Sight, 1E150N64�� $ 169.99
horn, rear sight and base include
screws that fit the holes in your
POST FRONT SIGHT MARLIN INTEGRAL POST AND BASE SET - One-piece front base,
Wesson & Harrington rifle for Fast Sighting With Ghost-Ring Apertures plus a fully adjustable ghost ring
drop-on, no gunsmithing instal- rear sight for Marlin lever guns.
lation. Slider has a detent that lets The potential accuracy of aperture sights with the sighting Hunters and competitive shooters the Marlin 1894, 1895 or Marlin
you feel each adjustment; setscrew locks into place. Ladder has side speed of open sights. All-steel construction. a
b alike will benefit from the faster 336/308MX Lever Rail Ghost Ring
markings so you can easily repeat the right yardage settings. Drift sighting offered by the .191" and set (above). Extra-long rail gives
adjustable for windage; setscrew locks your setting. a b APERTURE REAR SIGHTS - Easy-to-install, fully machined, all- .230" inside diameter rear aper- plenty of versatility in mounting
SPECS: Machined steel, blued finish. Sight - Ladder has approximately steel sights with windage and elevation-adjustable bases are pre- tures and .100" wide, white line front sight blade. Ghost Ring sets scope directly over the receiver or
127/64" (3.6cm) height adjustment; Buckhorn aperture 5/16" (8mm) I.D. Base machined to fit quickly using the rear scope base holes on many include a rear ghost ring sight that mounts directly to the receiver forward over the barrel for inter-
- 19/64" (7.5mm) high from bottom of receiver to top of base, 23/4" (7cm) popular rifles. A fast, accurate sight for brush hunting applications. without drilling and trapping. Lever Rail Ghost Ring sets include a mediate eye relief optics or red dot sights. Requires removal of
long, 5/8" (15.9mm) wide. Adjustments are secured with dual setscrews. rear ghost ring sight that mounts in the milled sight recess on the factory rear sight. Gunsmith installation recommended. a b
SPECS: Steel, blue, matte finish. .191" (4.8mm) diameter aperture. Marlin XS Sight Systems Lever Rail (available separately below). a b SPECS: Aluminum, black, matte finish. 11" (27cm) long, .830" (21mm)
#851-000-045AT Wesson & Harrington Sight,
Lever, Ruger® 10/22® and Rem. 700 fit factory, rear hole pattern. Win. 92 SPECS: Steel, black, matte finish. 1895 Ghost Ring Set - Fits Marlin 1895 wide. 3 oz.(85g) weight. Includes mounting hardware.
1E150Q94��$ 166.67
fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling with .700" and 1.00" c-to-c front ramp screws. .528" high front sight mea-
and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of #006-000-170AT Marlin 1894 Lever Rail, 6K54K07 �� $ 63.90
sured from top of barrel to top of blade. 336/1894/30AS Ghost Ring
bolt. Use with .350" (8.8mm) post front sight. Mauser requires drilling and #006-000-151AT Marlin 1895 Guide Gun Lever Rail,
Set - Fits Marlin 336, 1894, and 30AS with .700" c-to-c front ramp hole
tapping, use .350" (8.8mm) front sight. Ruger Mini Thirty®/Ranch replaces 6K54A07 �� 63.90
spacing. Lever Rail Ghost Ring Sets - For XS Lever Rail applications only.
XS SIGHT SYSTEMS SEMI-AUTO RIFLE factory aperture. Models available for Marlin 1895 and 336. #006-000-165AT Marlin 336/308MX Lever Rail,
6K54H07�� 63.90
TRITIUM SIGHT SETS for HK & STOCK # FITS PRICE #006-000-033AS 1895 Ghost Ring Set, 6K80E14�� $ 90.00
#006-103-300AT Marlin 30AS, 336, 1894 6K54P07 $ 58.50 #006-000-024AS 336/1894/30AS Ghost Ring Set, MARLIN 1894/1895/336/308MX LEVER RAIL SIGHT SYSTEM -
SPRINGFIELD #006-103-095AT Marlin 1895 in 45-70, .444 6K54F10 $ 58.50 6K80N14�� 90.00 Convenient kit combines the
#006-103-098AT Mauser 98 6K54M07 $ 58.50 #006-000-162AS 1895 Lever Rail Ghost Ring Set, lightweight Lever Rail one-piece
6K80A14 �� 90.00 scope rail with backup iron sights
#006-103-700AT Rem. 700 6K54B07 $ 58.50
#006-000-164AS 336 Lever Rail Ghost Ring Set, for mounting on your Marlin le-
#006-103-014AT Ruger Mini Thirty®/Ranch 6K54H07 $ 58.50 ver rifle without drilling and trap-
6K80H14�� 90.00
#006-103-092AT Win. 92/94 Angle Eject 6K54A07 $ 58.50 ping. Rear ghost ring is fully ad-
justable for windage and eleva-
POST FRONT SIGHTS - Modified post front DRC WINGED 1895 GHOST-RING SIGHT SET - Give your 1895 tion, with interchangeable .191"
Fast Target Acquisition In Full & Low Light sight with vertical white line insert is fast and Guide Gun an extremely durable sight and .230" diameter apertures for
easy to see in all light conditions. Variety of that withstands the toughest hunting fine-tuning accuracy. One-piece front sight has .100" wide white-
Steel sight sets feature tritium front sight for quick pickup in
heights to fit a wide selection of rifles. and field use. Sturdy steel wings pro- line post. a
b
full light, half light, and low light. HK 91/93/94/MP5 sight set has
SPECS: Steel, blue, matte finish. Fits nominal 3/8" x tect the rear sight body from damage. SPECS: Lever Rail - Aluminum, black, matte finish. 11" (27cm) long, .830"
a Standard Dot front sight and windage/elevation adjustable rear
.375" dovetail. .100" (2.54mm) wide post has .040" Windage and elevation adjustable, (21mm) wide. 3 oz. (85g) weight. Includes mounting hardware. Sights -
sight. M1A/M14 sight set has a 24/7 Tritium strip front sight and a
(1mm) wide stripe, heights listed in chart. Heights measured from top of ghost-ring rear furnished with .191" Steel, matte black finish. Front sight: .100" wide, .528" high measured from
.125" aperture rear sight for fast acquisition. Available for M1A Scout
blade to bottom of dovetail. Includes Test Post Sight. and .230" diameter apertures. One- top of barrel to top of blade. 1895 fits Marlin 1895 with .700" (17.8mm) and
Rifles with 18" barrels and M1A/M14 rifles with 22" barrels. a b
piece front post and base has highly visible, .100" wide, white line, 1" (2.5cm) c-to-c front ramp screws. 336 fits round barrel Model 336 only.
SPECS: Steel, matte black. Tritium insert on front sights. M1A Scout fits STOCK # HEIGHT PRICE front post. a b #006-000-167AT Marlin 1894 Lever Rail Sight System,
rifles with 18" barrels. M1A/M14 fits rifles with 22" barrel. Gunsmith instal- #006-113-250AT .250" (6.35mm) 6K29M06 $ 31.50 SPECS: Steel, black, matte finish. 1895 - Fits Marlin 1895 with .700" and 6K148P17�� $ 162.00
lation recommended.
#006-113-300AT .300" (7.62mm) 6K29A06 $ 31.50 1.00" c-to-c front ramp screws. .528" high front sight measured from top
#006-000-137AT Std Dot Tritium, HK 91,83, 94, MP5, of barrel to top of blade. #006-000-166AT Marlin 1895 Lever Rail Sight System,
#006-113-350AT .350" (8.89mm) 6K29N06 $ 31.50 6K148D17 �� 162.00
6K111P70��$ 130.00
#006-113-400AT .400" (10.16mm) 6K29Q06 $ 31.50 #006-000-037AS DRC 1895 Marlin Sight, 6K108A19��$ 121.50
#006-000-138AT 24/7 Tritium, M1A Scout, Bush Rifle, #006-000-168AT Marlin 336 Lever Rail Sight System,
6K112A57�� 133.20 #006-113-450AT .450" (11.43mm) 6K29M06 $ 31.50 6K148C17 �� 162.00
6K29B06 $ 31.50 MARLIN 1894/1895/336/308MX LEVER RAIL - Lightweight scope
#006-000-152AT 24/7 Tritium, M1A/M14 Rifle, #006-113-500AT .500" (12.7mm) #006-000-169AT Marlin 308MX Lever Rail Sight
rail mounts to Marlin centerfire lever gun without drilling and trap-
6K112F57�� 133.20 #006-113-600AT .600" (15.24mm) 6K29A06 $ 31.50 ping. Accepts Weaver-style or Picatinny accessories, including System, 6K163J22 �� 179.10
order on the web

XS SIGHT SYSTEMS BRADLEY™ MARBLE IMPROVED
COWBOY FRONT EXPRESS SIGHT SIGHT BEAD PEEP TANG SIGHT
RIFLE/SHOTgUN SIGHTS
Fits post STK# SIGHT STK# Screws
Faster To Find Than Factory Sights; Shiloh Sharps 1874 & New L #579-000-167AT #579-000-129AT
The Original “Bead-On-A-Block” Interchangeable Posts For Quick
Legal For SASS Competition Model 1874
Change From Short- To Long-Range
Standard Bradley - Places the front sight bead on a block of steel Springfield 1870 L #579-000-167AT #579-000-125AT
Get your Cowboy lever rifle on target faster and for positive indexing, greater surface area and increased strength.
Configuration
Taurus M62 L #579-000-168AT #579-000-100AT
enjoy higher overall scores. White dot express-style Available in red and white colored plastic or gold brass beads. Solid Gives the single-shot or lever gun
front sight works with either your factory rear or and Taylor 1874 Sharps L #579-000-167AT NA
Brass Bradley - Uniform yellow brass (gold) or white brass (silver) shooter the period looks of a traditional
aftermarket ladder-adjustable rear “V”. Provides ex- beads with positive-stop skirts. a b Thompson/Center Scout L #579-000-167AT #579-000-100AT
tang-mounted peep sight, plus new
tremely fast pick-up in all light conditions, so you can knock down SPECS: Standard Base - steel, blue. Bead - plastic, red, or white. Brass Uberti 1873 (not incl. S #579-000-166AT #579-000-100AT
adjustability features that allow fast
those steel cowboy targets even faster. Includes instructions plus Beads - gold or silver. Metric beads are all white color. changes from short- to long-range set- Hunter)
two nylon try-sights to help establish required front sight height tings. Great for the cowboy shooter who wants to use the same Uberti 1885 L #579-000-167AT NA
before actual sight installation. a b STANDARD BRADLEY BEADS
gun in cowboy competition and long-range side matches, or as an Uberti 1886 S #579-000-166AT #579-000-100AT
SPECS: All-steel, matte finish, black. .500" (12.3mm) high, .148" (3.7mm) STK# EA. STK# 3-PAKBEAD TPI SHANK Color alternative to vernier-type sights on single-shot rifles used in BPCR
thick blade, nominal 3/8" (9.mm) wide dovetail. Fits Winchester legacy lever Uberti 1892 L #579-000-167AT #579-000-100AT
SIZE LENGTH and other long-range competitions. Each sight comes with a post
action rifles and Marlin Cowboy rifle, all calibers. Uberti Henry L #579-000-167AT #579-000-127AT
#146-184-011AT #146-184-031AT 1
/8" 3-56 5
/32" Red that is the correct height to regulate the same as the original factory
#006-000-155AT .500" Express Front Sight, 6K29F06�� $ 31.50 iron sights. Click adjustable for windage and elevation; each click is Uberti Rolling Block L #579-000-179AT #579-000-100AT
#146-184-012AT #146-184-032AT 1
/8" 3-56 5
/32" White
approximately 1/4" of adjustment at 100 yards. For larger elevation Varner Favorite S #579-000-166AT #579-000-124AT
#146-184-013AT NA 1
/8" 3-56 5
/32" Gold
changes, you can easily swap in a higher or lower post (available Winchester 1866 L #579-000-167AT #579-000-102AT
#146-186-011AT #146-186-031AT 1
/8" 6-48 5
/64" Red below); choose a lower post for close-in shooting and a taller post Winchester 1873 L #579-000-167AT #579-000-119AT
#146-186-012AT #146-186-032AT 1
/8" 6-48 5
/64" White for longer ranges. All components are precision CNC machined
XS SIGHT SYSTEMS AK-47 #146-186-013AT NA 1
/8" 6-48 5
/64" Gold from 4140 steel, with critical parts heat-treated for extra strength. Winchester 1876 & 1886 S #579-000-174AT NA
(original)
24/7 TRITIUM STRIPE FRONT SIGHT #146-187-012AT #146-187-032AT 1
/8" 6-48 9
/64" White To purchase, find your gun in the left column, then find the correct
sight kit and mounting screw set for it in the right column. Use with Winchester 1885 (original) L #579-000-167AT #579-000-103AT
#146-532-412AT #146-532-432AT 5
/32" 3-56 5
/32" White
For Low-Light, Tactical Situations Marble’s front sights, available separately. a b Win. 1885 Low- & High- L #579-000-167AT #579-000-100AT
#146-532-712AT #146-532-732AT 5
/32" 6-48 7
/64" White SPECS: Steel, blued. Drilling and tapping may be required for installation
Machined, steel, front post features a tritium vial Wall (Japan mfr)
#146-532-812AT #146-532-832AT 5
/32" 6-48 9
/64" White on older guns. Sight kit includes base, Low (L) or Standard (S) height post,
for low-light target acquisition and an eye-catch- Winchester 1890, 62, 64, 65 L #579-000-167AT #579-000-117AT
#146-532-912AT #146-532-932AT 5
/32" 8-40 1
/8" White 1
/2" O.D. aperture disc with .055" peep, and Allen wrench.
ing white outline for use during daylight hours. Re- Win. 1892 (original) & 1894 L #579-000-167AT #579-000-102AT
places factory windage drum and front sight post. — Advise # — Standard Bradley Bead, each, 6D6M99�� $ 6.99
Fits post STK# SIGHT STK# Screws (all, exc. .22 cal)
Each full turn of front post moves point of impact — Advise # — Standard Bradley Bead, 3-pak, 6D14K10�� 20.99
American Arms 1874 Sharps S #579-000-166AT #579-000-124AT Winchester 1892 (w/tang S #579-000-178AT #579-000-123AT
approximately 4" at 100 yards. Includes installation
instructions, tools, and locking adhesive. a b METRIC BRADLEY BEAD Armi 1874 Sharps L #579-000-167AT #579-000-131AT safety)
SPECS: Steel, matte black finish. Fits AK-47 rifles. STK# EA. STK# 3-PAK BEAD SIZE TPI Ballard No. 8 Union Hill L #579-000-168AT NA Winchester 1895 (original) S #579-000-176AT #579-000-116AT
#006-000-150AT AK-47 24/7 Front Sight, 6K62N54 �� $ 67.50 #146-000-001AT #146-000-005AT 1
/8" 2.5mm Browning 1885 w/tang L #579-000-167AT #579-000-132AT Winchester 1895 (w/tang S #579-000-176AT #579-000-113AT
#146-000-002AT #146-000-006AT 1
/8" 3mm Browning 1885, 78 w/o tang L #579-000-167AT #579-000-125AT safety)
#146-000-004AT #146-000-008AT 5
/32" 3mm Browning 1886 S #579-000-174AT NA Winchester 1906 L #579-000-167AT #579-000-117AT
NA #146-000-007AT 5
/32" 2.5mm Browning 1892, 53, 65 L #579-000-167AT #579-000-106AT Winchester 53, 55 L #579-000-167AT #579-000-102AT
XS SIGHT SYSTEMS RIFLE — Advise # — Metric Bradley Bead, each, 6D8H99�� $ 8.99 (Japan mfr) Winchester 9422 (.22LR) L #579-000-170AT #579-000-120AT
Marlin 1893 & 1894 (original NA #579-000-124AT
WEAVER BACKUP SIGHT — Advise # — Metric Bradley Bead, 3-pak, 6D22D99�� 22.99 Browning 1892 w/tang
safety
S #579-000-178AT #579-000-123AT
models made prior to 1932
Excellent Insurance Against BRASS SKIRTED BEADS Browning 1895 (Japan mfr) S #579-000-176AT #579-000-106AT only)
Scope Failure STK# EA. STK# 3-PAK TPI Color Size Browning 71LT S #579-000-174AT #579-000-106AT Henry Golden Boy .22LR NA #579-000-100AT
#146-003-013AT #146-003-033AT 6-48 Gold 1
/8" Cimarron 1866 S #579-000-166AT #579-000-109AT Win. 1886 (Japan), Brown- NA #579-000-112AT
Ghost-ring aperture is a fast, alter-
native, open sight that will save your #146-010-113AT #146-010-133AT 3-56 Gold 1
/16" Cimarron 1873 S #579-000-166AT #579-000-133AT ing 1886
hunt if your scope fails. Perfect for use #146-020-114AT #146-020-134AT 3-56 Bright Silver 1
/16" Colt Lightning (small frame) S #579-000-173AT #579-000-128AT Henry Lever Action .22S/L/ NA #579-000-105AT
on in-line muzzleloaders when hunting no-scope areas. Attaches in NA #146-005-033AT 5-40 Gold 1
/8" LR & .22 Mag.
EMF 1874 Sharps (not L #579-000-167AT #579-000-131AT
just seconds, without gunsmithing, to any Weaver-style base. Fully NA #146-030-135AT 3-56 Dull Sliver 1
/16" Glenfield 30, Marlin 39, NA #579-000-114AT
carbine)
adjustable for windage and elevation. Includes front Test Post. a b 1892, 1894 (Cowboy), 1897,
SPECS: Steel, blue, matte finish. .191" (4.8mm) diameter aperture. Weaver — Advise # — Brass Skirt Bead, each, 6D2M99�� $ 2.99 H&R Buffalo Classic L #579-000-167AT #579-000-125AT
1897 Annie Oakley
- .275" (7mm), High Weaver - .500" (12.7mm) from top of base to center — Advise # — Brass Skirt Beads, 3-pak, 6D7P03 �� 8.99 Henry .22LR Lever (H001 & L #579-000-167AT NA
of aperture. Henry Big Boy .44 NA #579-000-102AT
H001T, not H001V)
#006-105-000AT Weaver Backup Sight, 6K58H49�� $ 69.30 Win. 62, 1890, 1906 NA #579-000-117AT
Henry Golden Boy .22LR S #579-000-173AT #579-000-105AT
#006-105-001AT High Weaver Backup Sight, (H004) & .22 Mag (H004M) — Advise # — Peep Tang Sight, 9G92C89��$ 133.99
6K66G95�� 73.80 — Advise # — Tang Sight Screw Set, 9G4E88�� 7.99
CARLSON’S Henry Big Boy .30-30, S #579-000-166AT #579-000-116AT
.357/.38, .44 Mag. & .45 Colt
HIGH VISIBILITY SHOTGUN BEAD Marlin 1889, 1892, 1893, L #579-000-168AT #579-000-124AT SIGHT POSTS - The Improved Tang Sight’s quick-release post sys-
1894, 25, 27, 29, 39, 39A tem makes it easy to replace the post that came with your sight
Easy-To-See White Or Fluorescent Red with a higher or lower one for targeting at different ranges.Choose
(old/original models)
Provides an easy-to-pick-up front bead a lower post for close-in targets or a taller post for longer ranges.
Marlin/Glenfield 30A, 30AS, L #579-000-170AT #579-000-114AT
in all types of hunting conditions. On dark or Post height is also click adjustable for fine-tuning when sighting
30GT in; each click represents 1/4" of adjustment at 100 yards. A jam nut
cloudy days the white bead is fast and easy to
see. On bright, sunny days the fluorescent red bead remains visible Marlin 39A, 39AS, 39M, L #579-000-170AT #579-000-114AT locks the elevation, so you can remove and reinstall a post without
in even the brightest light. 39TDS (current models) losing settings. ab
SPECS: Plastic bead, steel base, blued. 3-56 or 6-48 thread. Marlin 336, incl. 444SS, S #579-000-176AT #579-000-114AT SPECS: Steel, blued. Heights measured from base of post to center of
#155-400-003AT 3-56 White High Vis. Bead, 5E5C22��$ 5.99 1895G, 1895SS aperture. Low - 1.085" to 1.415" height adjustment range. 1/2" aperture
disc with .055" peep. Standard - 1.341" to 1.876 height adjustment range.
- 6 or More - 3-56 White High Vis. Bead, 5E3J76 �� 5.50 Remington Model 1, 2, 5 S #579-000-173AT #579-000-130AT Medium - 1.875" to 2.965" height adjustment range. 3/4" aperture disc with
GUNSMITHING TIPS!
#155-400-004AT 3-56 Red High Vis. Bead, 5E5B22�� 5.99 Rem. No. 1 Rolling Block L #579-000-179AT #579-000-100AT .032" peep. High - 2.820" to 4.770" height adjustment range. 3/4" aperture
- 6 or More - 3-56 Red High Vis. Bead, 5E3L76�� 5.50 (current mfr) disc with .032" peep.
#155-400-001AT 6-48 White High Vis. Bead, 5E5E22�� 5.99 Rossi 1892, 65 L #579-000-167AT #579-000-101AT #579-000-096AS Sight Post, Low, 9G35B98��$ 39.99
FREE ONLINE! - 6 or More - 6-48 White High Vis. Bead, 5E3C76�� 4.99
#155-400-002AT 6-48 Red High Vis. Bead, 5E5L22�� 5.99
- 6 or More - 6-48 Red High Vis. Bead, 5E3N76�� 5.50
Rossi 59, 62
Savage 30G Stevens
Favorite
L
L
#579-000-167AT #579-000-104AT
#579-000-168AT #579-000-124AT
#579-000-097AS Sight Post, Std, 9G35D98�� 39.99
#579-000-098AS Sight Post, Mid-Range, 9G46I05�� 57.99
#579-000-099AS Sight Post, Long-Range, 9G45A16�� 47.99
MARBLE TANG SIGHT PEDERSOLI SHOTGUN SIGHT

COWBOY TARGET RIFLE SIGHTS
Rifle/shotgun sights
Period Looks, Superb Accuracy CONVENIENCE KIT
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Superb Long-Range Accuracy & The Right Period Styling
The Tools & Sights You Need To Install/
Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture Replace Sight Beads
Single-shot rifles of the Old West are capable of tremendous
closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer
range and accuracy, but fixed, factory sights rarely allow these guns
adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately. a b Everything you need to achieve a Professional shotgun sight
to reach their full potential. In the days before compact scopes,
SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) 1/2" diameter apertures: .055" (1.4mm) and .102" repair or installation. Each kit includes the right drill bit and bot-
target shooters and hunters seeking tack-driving accuracy relied
(2.6mm) size holes, and (1) /4" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Late
3
toming tap, plus sight(s) to help you clean up existing threads or
on precisely adjustable vernier tang-mounted rear sights and globe
rifles with safety at trigger will require drilling and tapping. Mounting screw sets sold separately. install a sight with a larger, stronger shank. The Brownells 6-48 Kit
front sights. Pedersoli offers BPCR silhouette shooters, competi-
tors, and Cowboy Action shooters taking part in Schuetzen side features two, #4 brass front beads. Each Bradley kit has an Ivory,
TANG SIGHT & REPLACEMENT SCREWS matches affordable, high-quality replica sights that function just Bradley-type front sight.
like the originals. Get your Winchester 1885, Rolling Block, Sharps, SPECS: Bradley sights have 3/32" (2.38mm) long shanks.
STK# Fits STK# SCREWS
Ballard, Trapdoor Springfield, or other vintage single-shot rifle per- #078-021-048AT 6-48 Brownells Kit, 8 G11K17�� $ 12.61
#579-009-824AT Browning 1892, 53, 65 (Japan mfr) #579-000-106AT forming—and looking—its best. #078-021-256AT 3-56 Bradley Sight Kit, 8 G11F80�� 12.99
#579-009-800AT Browning 1885 w/tang #579-000-132AT
#078-021-248AT 6-48 Bradley Sight Kit, 8 G14M14�� 15.15
#579-009-804AT Glenfield 30, Marlin 39, 1892, 1894 (Cowboy), 1897, 1897 Annie Oakley #579-000-114AT “CREEDMOOR” REAR TANG SIGHTS -
#579-000-150AT Henry Lever Action .22S/L/LR & .22 Mag. #579-000-105AT Named after the famous range on Long
#579-009-833AT Henry Golden Boy .22LR #579-000-100AT Island that hosted many long-range rifle
competitions in the 1870s and ‘80s, the
#579-000-084AT Henry Big Boy .44 #579-000-102AT Creedmoor ladder-type sight is fully ad- TRUGLO BRITE-SITE SHOTGUN SIGHT
#579-009-829AT Marlin 1893 & 1894 (original models made prior to 1932 only) #579-000-124AT justable for windage and elevation and
#579-009-805AT Marlin 336/1895, 444S #579-000-114AT works equally well on cartridge rifles and Tritium & Fiber Optic Sight Provides
#579-009-827AT Marlin 25, 27, 29, 39A, 1892, 1897 (original) Ballard #8 Union Hill, Savage 30G, Stevens Favorite #579-000-124AT muzzleloaders. Sight is precision ma- Superior Contrast, Day Or Night
#579-009-819AT Remington Model 1, 2, 5 #579-000-100AT chined from steel and attaches to tang
with supplied setscrews and folds down Advanced Tritium Fiber Optic technolo-
#579-009-807AT Rossi 1892, 65 #579-000-101AT when not in use. The Universal model gy combines glow-in-the-dark tritium with
#579-000-015AT Savage 99 (see price below) #579-000-124AT is available in middle-range 2" and long-range 3" a bright, fiber optic rod to keep you on target
#579-009-811AT Uberti and Cimarron 1866 #579-000-105AT heights. The windage adjustment mechanism is during all lighting conditions. Highly visible, 3/16" diameter green dot
on the eyepiece, allowing the eyepiece to dropped ensures quick sight acquisition. Heavy duty, precision-machined
#579-000-003AT Uberti and Cimarron 1873 #579-000-105AT
close to the base for close-in shots. The Soule model aluminum base with protective wrap-around cage prevents dam-
#579-000-149AT Uberti 1885 #579-000-132AT age and snagging. Mounts to barrel with included 6-48 tpi screws
provides maximum adjustability to fit any hunting or
#579-009-808AT Win. 53, 55, 64, 1892 (original), 1894 (except .22) #579-000-102AT target shooting conditions. Elevation is adjustable in that hold tight under the heaviest recoil. Hardcoat anodized for du-
#579-009-803AT Win. 62, 1890, 1906 #579-000-117AT precise increments of 1 MOA, and one full turn of the rability. Not designed for ventilated rib barrels; gunsmith installation
#579-000-001AT Win. 1885 Low Wall (Japan) #579-000-100AT windage knob moves the point of aim left or right recommended. a b
by 21/2 MOA in 1/2 minute increments. Large knurled SPECS: Aluminum base, black. Base - 21/2" (6.3cm) long x 5/8" (1.6cm) wide.
#579-009-800AT Win. 1885 Hi-Wall (Japan), TC Scout #579-000-100AT
knob at the sight base allows fast, accurate return to T.F.O. rod - green, 21/8" (5.4cm) long x 3/16" (4.8mm) dia.
#579-009-801AT Win. 1876 & 1886 (original) #579-000-118AT center or previous setting. Choice of Short, Middle, Goodwin Style #902-000-112AT Brite-Site Shotgun Sight, 2 K82K66 �� $ 87.99
#579-009-806AT Win. 1886 (Japan), Browning 1886 #579-000-112AT and Long Range models. Goodwin Style sights of- Tang
#579-000-085AT Win. 94 (tang safety), 94 Legacy, 94 Trails End™ #579-000-108AT fer precise windage adjustments with 1.26" movement for high
— Advise # — Marble Tang Sight, 9G117K42�� $ 126.99 wind conditions. Elevation adjustment totals 3.94" for long-range
shooting and the tilt screw on the base lets you keep the sight
— Advise # — Mounting Screw Set For Marble Tang Sight, 9G5P36�� 5.99 perfectly vertical, no matter the elevation or angle. Goodwin-Style VARIABLE APERTURE HADLEY-STYLE EYEPIECE - Rotating, de-
structure lets you reach the rifle’s chamber with any cleaning detent-locking disc in the eyepiece lets you select one
vice and inspect the barrel between shots. of eight aperture sizes to match your sight setting
SPECS: Steel, blued. Elongated rear mounting hole allows installation to current lighting conditions for optimum accuracy.
HIVIZ BENELLI SHOTGUN REMINGTON VERSAMAX on most rifles. Drilling and tapping of tang may be required. Distance Change settings with a flick of your thumb; no cum-
between mounting holes 2.20"-2.29" (5.6-5.8cm). Mounting screws and bersome disassembly or loosening and tightening of
FIBER OPTIC FRONT SIGHT COMPETITION MASTER FRONT SIGHT installation instructions included. the eyepiece. Soft rubber ring minimizes pain from
#100-002-377AT Univ. Middle Range 2" Tang Sight, accidental contact with eyepiece on recoil. Fits both Universal and
For Faster Targeting In Low-Light Fiber Optic Sight For 4A123K00�� $ 134.99 Soule-type Creedmoor sights.
Conditions; Interchangeable Red & Higher Visibility #100-002-376AT Univ. Long Range 3" Tang Sight,
SPECS: Steel, blued. 1.25" (3.1cm) diameter.
Green Rods 4A123K00�� 134.99 #100-002-381AT “Hadley”-Style Eyepiece, 4 A65G00� $ 69.99
Highly-visible, fiber optic sight
Fiber optic sight maintains excellent provides a bright, yellow-green #100-002-378AT “Soule” Short Range 2" Tang Sight, FOLDING FRONT SIGHT - Serves as a globe sight
sight/target contrast in a broad range of aiming point for faster sight ac- 4A182E00�� 199.99 for long-range shooting when raised, or you can
lighting conditions and lets you quickly quisition to help you get on target #100-002-379AT “Soule” Middle Range 3" Tang Sight, fold it down and use the built-in blade for close
change the fiber optic rod from red to quickly. Sight installs with a single 4A188Q00�� 204.99 work. Ball/detent mechanism positively locks
green. Easily replaces the front post screw and can be added to the gun #100-002-380AT “Soule” Long Range 4" Tang Sight, sight in folded or extended position. Fits rifles
on Benelli M1, M2, M3, M4, Nova Tactical and Super Nova Tactical in minutes. Optional HiViz Acces- 4A206J00�� 224.99 with 3/8", 60° dovetails.
shotguns with ghost ring rear sight. Unique, U-shaped rod gathers sory Kit has a red light pipe and a SPECS: Steel, blued, and natural-finish brass. Fits 3/8"
white, non-fiber optic white insert #100-010-691AT Goodwin Style Tang, 4 A185C00�� 199.99
far more light than a standard straight rod—perfect for low-light (9.5mm), 60° dovetail.
situations. Comes with two green and two red interchangeable along with the necessary installa-
#100-002-383AT Folding Front Sight, 4 A52J00��$ 56.99
rods that can be changed quickly using the included tool, so you tion tool to adapt the sight to the SPIRIT LEVEL TUNNEL FRONT SIGHT W/INSERTS - Windage-
can customize the sight picture or replace a damaged rod quickly. shooter’s needs. a b adjustable, tunnel front TUNNEL FRONT SIGHT W/INSERTS - Tunnel front sight comes
Elevation adjustable. SPECS: Sight - Steel, black oxide finish. 15/16" (2.4 cm) length, 1/4" (6.4 cm) sight comes with 12 inter- with 12 inserts letting you
SPECS: Steel, matte black, with 2 green and 2 red fiber optic rods. Includes width, /32" (4 cm) height. HiViz Accessory Kit includes 1 red light pipe, 1
5
changeable inserts so you choose the best sight pic-
rod removal tool, carrying case, and instructions. Fits Benelli M1, M2, solid white insert, and installation tool. can choose the sight picture ture for your shooting con-
M3, M4, Nova Tactical, and Super Nova Tactical shotguns with ghost #767-000-952AT Comp Master Front Sight, that’s best for the distance ditions. Works great with
ring rear sight. 7F20L51�� $ 22.99 and range of your target. The Creedmoor rear sights. Steel
#638-000-191AT Benelli Shotgun FO Front Sight, #767-000-953AT Versamax HiViz Accessory Kit, spirit level helps you hold the construction for long life
8C23G82��$ 24.99 7F27J22�� 30.99 rifle completely upright to eliminate inaccuracies caused by tilting and matte finish cuts glare.
to the left or right. Perfect companion for the Creedmoor Rear Inserts lock into plce with
Sights. knurled, threaded cap.
SPECS: Steel, blued. 1" (2.8cm) OAL, 113/32" (3.6cm) maximum width at SPECS: Steel, matte blue finish. Sight – 11/5" (3cm) OAL. 5/8" (1.5cm) wide.
adjustment knobs. Fits 3/8" (9.5mm), 60° dovetail. Instructions included. Fits 3/8" 60° dovetail.
. . . THE GUNSMITH’S CHOICE™ #100-002-382AT Spirit Level Tunnel Sight w/Inserts,
4A116E00 �� $ 129.99
#100-010-696AT Tunnel Front Sight W/Inserts,
4A35E00�� $ 38.99
order on the web

SHOTGUN SIGHT KITS
SHOTGUN SIGHT KIT “A” TWO KITS THAT COMPLEMENT EACH OTHER, A TOTAL OF 160 PRECISION, SHOTGUN SIGHT KIT “B”
ECONOMICAL, GOOD-LOOKING, REPLACEMENT SHOTGUN BEADS
SHOTGUN SIGHT KIT "A" CONTAINS: SHOTGUN SIGHT KIT "B" CONTAINS:
No. Head Dia. Thread Shaft Drill & Tap Sizes Color No. Head Dia. Thread Shaft Drill & Tap Sizes Color
1 .067 3 - 56 No. 45 - 3-56 G 21 .067 6 - 48 No. 31 - 6-48 G
2 .130 3 - 56 No. 45 - 3-56 G 22 .130 6 - 48 No. 31 - 6-48 G
3 .175 3 - 56 No. 45 - 3-56 G 23 .130 8 - 40 No. 28 - 8-40 G
4 .175 6 - 48 No. 31 - 6-48 G 24 .175 8 - 40 No. 28 - 8-40 G
5 .067 3 - 56 No. 45 - 3-56 W 25 .067 6 - 48 No. 31 - 6-48 W
6 .130 3 - 56 No. 45 - 3-56 W 26 .130 6 - 48 No. 31 - 6-48 W
7 .175 3 - 56 No. 45 - 3-56 W 27 .130 8 - 40 No. 28 - 8-40 W
8 .175 6 - 48 No. 31 - 6-48 W 28 .175 8 - 40 No. 28 - 8-40 W
Brownells Shotgun Sight Kit “A” is a practical, economical assortment of top-quality, replacement shotgun sights. The workmanship Brownells Shotgun Sight Kit “B” is truly the natural and logical companion to the original Kit “A” - giving you all the sights that Kit “A”
is superb, being done on the most modern and up-to-date machinery in the U.S.A. The sight globes are true spheres - not lop-sided as doesn’t contain, but that you need to have for a really versatile and complete replacement shotgun sight inventory. Plus, in Kit “B,” we took the
those found on many other sights at a higher price. The threads are cut onto the shank, and are clean, sharp and well-machined for the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does
best possible fit. Shanks are threaded right up to the base of the bead so you can set the sight exactly onto the barrel. not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus,
Your choice of sights in the Kit is extremely wide. There are 2 shank sizes, 3 bead sizes and 2 bead colors, giving you a total of 8 dif- the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally a lot better sight.
ferent sights to choose from so you can fit nearly any gun that comes into the shop. But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among
The two shank sizes are 3-56 and 6-48. Size 3-56 is one of the most widely used shanks in the industry and will fit most guns having shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly
threaded sight holes. The 6-48 shaft was chosen for the alternate size to be used when the original hole must be redrilled and tapped - or the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger,
where there is no hole at all - because 6-48 is the firearm industry standard screw size, and every gunshop in the country will have the drill tapping, and inserting the new bead.
and tap on hand to make the new hole. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It
Bead sizes are .067, .130 and .175, (the most popular sizes), giving your customer the choice of small, medium or large beads. In ad- also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original
dition, each bead size is available in Gold color - machined from finest brass; or White color - machined from high tensile aluminum alloy. size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”,
Neither color will bleed at the heels, wear off with hard use, or chip and peel, as almost all enameled sights eventually do. the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best
possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.
Brownells Shotgun Sight Kit “A” comes to you very attractively displayed in a clear plastic counter case. Each individual sight number
is in its own plainly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 sights in the Kit - 40 Gold and Thread sizes are 6-48 and 8-40 - two of the most common and popular thread sizes in the gun industry, so everyone has the necessary
40 White - a complete inventory of top-quality shotgun sights with an absolute minimum of capital invested. drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.
Don’t pass up the opportunity to cash-in on the shotgun sight replacement market. For an unbelievably low investment you can The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they
have a complete, correctly balanced and assorted inventory of 80 superb shotgun sights, each carrying Brownells guarantee of perfect cannot bleed, chip, peel or have the color wear off.
workmanship and materials. Don’t let yourself get caught short when you can have them on hand so easily. Order your Brownells Shotgun As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identi-
Sight Kit “A” today! a
b fied box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3
SPECS: Brass and Aluminum Beads in 31/2" (8.9cm) x 7" (17.8cm) clear plastic box. very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile
#080-532-000AT Shotgun Sight Kit “A”, total of 80 sights in Counter Case, 8 K48P55�� $ 69.99 and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells
Shotgun Sight Kit “B” today. ab
SINGLE PAK REFILL SIGHTS FOR KIT “A” SPECS: Brass and Stainless Steel Beads in 31/2" (8.9cm) x 7" (17.9cm) clear plastic box.
#080-532-100AT Brass/SS Shotgun Sight Kit “B”, total of 80 sights in Counter Case, 8 K48B63 �� $ 69.99
STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO.
#080-532-129AT 1 #080-532-131AT 3 #080-532-133AT 5 #080-532-135AT 7
#080-532-130AT 2 #080-532-132AT 4 #080-532-134AT 6 #080-532-136AT 8 SINGLE PAK REFILL SIGHTS FOR KIT “B”
— Advise # — Single Pak Shotgun Sight Refills, 8K2A02�� $ 3.99
#080-532-137AT 21 #080-532-139AT 23 #080-532-141AT 25 #080-532-143AT 27
— Advise # — 10 Pak Shotgun Sight Refills, 8K11Q51�� 24.99
#080-532-138AT 22 #080-532-140AT 24 #080-532-142AT 26 #080-532-144AT 28
10 PAK REFILL SIGHTS FOR KIT “A”
— Advise # — Single Pak Shotgun Sight Refills, 8K2F02 �� $ 3.99
#080-532-001AT 1 #080-532-003AT 3 #080-532-005AT 5 #080-532-007AT 7 10 PAK REFILL SIGHTS FOR KIT “B”
#080-532-002AT 2 #080-532-004AT 4 #080-532-006AT 6 #080-532-008AT 8
— Advise # — 10 Pak Shotgun Sight Refills, 8K11Q51�� $ 24.99 #080-532-121AT 21 #080-532-123AT 23 #080-532-125AT 25 #080-532-127AT 27
#080-532-122AT 22 #080-532-124AT 24 #080-532-126AT 26 #080-532-128AT 28
— Advise # — 10 Pak Shotgun Sight Refills, 8K15M75 �� $ 24.99
N.E.C.G. SHOTGUN SIGHT BEAD LYMAN SHOTGUN SIGHT

Mammoth Tusk For Look Of
A Traditional Ivory Bead
This meticulously crafted front bead is made from .146" - 48 TAP SHOTGUN SIGHT THREADS
IVORY FRONT FRONT REAR
genuine Mammoth ivory to give a fine shotgun the look These sizes are correct to the best of our knowledge,
No. 10 No. 10D No.11
of traditional elephant ivory, without violating interna- (Use #47 Drill) A special three-flute tap for the oversized Poly-Choke Extra however, sizes may vary with year, country of manufacture,
(Use #29 Drill)( (6-48 thread)
tional trade restrictions. Practical, too, because it gives Long Shank (5/16") and Bev-L-Blok sights. Use .125" (1/8") drill with etc. Browning, 3mm-5 (Metal bead), 3-56 (Ivory bead);
a clean, easy-to-see, glare-free, white dot in all light this tap. a
b
conditions. #539-101-010AT No. 10 Front Sight, each, 5 K6A37��$ 6.99 Franchi, M3.0x0.50; Ithaca, 6-48; Marlin, 3-56; Mossberg,
SPECS: Turned Mammoth ivory, natural finish. .157" (4mm) dia. bead. Un- #539-111-028AT No. 11 Rear Sight, each, 5 K6P37�� 6.99 #080-598-146AT .146"- 48 Taper Tap, 8
K23A31�� $ 29.99 5-40; Remington, 6-48; Ruger®, 3-56; Smith & Wesson,
dersized 6-48 thread; secure with epoxy adhesive. #539-101-012AT No. 10D Front, Screw-in,w/wrench, M2.5x0.45; Weatherby, 3-56; Winchester, 3-56.
#661-104-004AT 4mm Sight Bead, 1 F11J68��$ 12.99 5K6I37 �� 6.99
SHOTGUN SIGHT BEAD KIT “C” WITH SHOULDERS HIVIZ SHOTGUN
high; (2) triangular, .20" (5mm) high; red, green.
FIBER OPTIC SIGHT
Shouldered Beads Install To The Right Height Every Time; Popular Sizes In Brass & Stainless Steel #638-000-032AT FlashPoint Sights, 8 C21N44��$ 23.99
Improves Target Visualization #638-000-033AT TriComp Sights, 8 C30M82�� 33.99
SHOTGUN SIGHT KIT "C" CONTAINS: Light gathering, polymer rod SPARK II SIGHT - Highly visible, fiber optic
works in low light as well as bright front sight features a unique, interchangeable
No. Head Dia. Thread Shaft Drill & Tap Sizes Color mounting post system for easy installation on
to provide an easy-to-see, fast-pointing dot. Four colored rods let
10 .130 3 - 56 No. 45 - 3-56 G you change sights to fit shooting conditions. Locating fingers on most major brands of shotguns with plain or
11 .130 6 - 48 No. 31 - 6-48 G each end center the sight on your rib; two strong magnets prevent ribbed barrels. Pre-tapped, steel sight base
12 .175 3 -56 No. 45 - 3-56 G movement. a b accepts five, included mounting posts to ac-
13 .175 6 - 48 No. 31 - 6-48 G SPECS: Base - Plastic, black. Rods - Polymer, red, green, yellow, orange. commodate shotguns drilled and tapped for 6-48, 5-40 or 3-56,
.170" (4.3mm) diameter sighting dot. M-300 - fits ribs 7/32" (5.5mm) to 5/16" plus the popular 3mm x .5 or 3mm x .6 metric sizes. Bright, fiber op-
14 .067 3 - 56 No. 45 - 3-56 W
(8.2mm) wide. M-400 - Fits ribs 5/16" (8.2mm) to 7/16" (11.3mm) wide. MPB tic LitePipe provides superior light transmission from dawn ‘til dusk,
15 .130 3 - 56 No. 45 - 3-56 W perfect for low light hunting conditions, as well as competition
- Fits all 16, 20 and 12 gauge, non-ribbed barrels.
16 .175 6 - 48 No.31 - 6-48 W and self defense guns where fast sight acquisition is paramount.
#638-300-000AT M-300 Fiber Optic Sight, 8 C17L15�� $ 18.99
17 .175 3 - 56 No. 45 - 3-56 W Requires drilling and tapping on shotguns with factory, press-fit
#638-400-000AT M-400 Fiber Optic Sight, 8 C17J15�� 18.99 bead sights. a b
#638-100-000AT MPB Fiber Optic Sight, 8 C17B15�� 18.99 SPECS: Sight Base - Steel, blue finish. .204" (5.2mm) long x .137" (3.5mm)
Brownells Shotgun Sight Kit “C” is a must have for any gunsmith or sporting goods store looking to save valuable time and really please
their customers. We have taken everything that’s great about our Shotgun Sight Kits “A” and “B” - like their unparalleled selection of high wide. Bead - Polymer, available in Red or Green. .362" (9.2mm) long x .106"
quality and size- popular sight beads- and added a special feature to make the beads in Kit “C” fast, easy, and convenient to install. . . every- COMP SIGHT - Light gathering, poly- (2.7mm) diameter. Sight Height - .167"(4.2mm) high from top of barrel to
time. Every sight bead in Shotgun Sight Kit “C” has the advantage of skirted shoulders. What this means to you, the professional gunsmith or mer rod provides an easy-to-see dot top of bead. 6-48 fits Remington, Weatherby, SKB and Ithaca. 3-56 fits
the sporting goods store owner, is you’ll never have to get out your mike or calipers again to ensure you’ve installed the sight to its proper in low light and bright daylight. Steel Browning Citori target guns, Benelli, Beretta, Ruger, and Winchester. 5-40
height. No more guesswork either! Because when the skirted shoulder reaches the barrel, it provides a positive stop that lets you know the base replaces front bead, screws on for fits Mossberg. 3mm x .5 fits Browning Gold and Citori field guns. 3mm x
sight is at its optimum height. Every sight from Shotgun Sight Kit “C” installs with fool-proof ease - saving you both valuable shop time and, a secure mount. Includes eight inter- .6 fits Browning Citori Hunter.
even more important, the nightmare of upsetting a valuable customer. Not only will customers be pleased with the installation you do, changeable light pipes, three orange, #638-000-016AT Red Spark II Sight, 8 C8H80�� $ 10.99
they’ll also love the huge selection of sizes and styles from which to choose. We selected the most popular sizes from our Shotgun Sight three green and two white in three di- #638-000-088AT Green Spark II Sight, 8 C8F80 �� 10.99
Kits “A” and “B”, because we know that’s what your customers will come in and ask you for. Plus, we know how important it is to offer dif- ameters: .105", .115" and .130" for competition, law enforcement
ferent styles to please as many shooters as possible. That’s why Kit “C” offers each size bead in both Gold and White. It provides the perfect and field use. Four sight mounting screws are supplied to fit nearly FOUR IN ONE II SIGHT - High-con-
selection; Gold brass for a classy, traditional look many shotgun owners are partial to and White stainless steel for a sight bead so strong it all shotgun ribs, plus a rotary carrying case for storing light pipes trast, light gathering front and rear
even stands up to hot bluing. Thread sizes include 3-56 and 6-48 with bead diameters of .067", .130", and .175" to give your customers the and spring release key. a b sights for Browning, Benelli, Moss-
choice of small, medium and large beads. Also, for easy storage and quick identification, we’ve followed the same, convenient layout of SPECS: Steel base, matte black. 1" (2.5cm) long. Screw/fits: 3-56" for Ru- berg and Winchester shotguns can
Kits “A” and “B” to make it as simple as possible to find the sight you need. Kit “C’s” plastic counter case is divided into eight compartments ger, Beretta/Benelli, Browning Target Citori, Krieghoff; M3X.5" for Brown- be used with the front only for wing
to keep the beads organized and right at your fingertips. Plus, if you put this great-looking kit on your counter for your customers to see, ing Gold and Citori Field; 5-40" for Mossberg; 6-48" for Remington (with shooting or in combination with the
it’s a great way to create more business by reminding people to replace broken or damaged sight beads. Brownells Shotgun Sight Kit “C” is threaded bead) and SKB sporting models. rear for a precision rifle-type sight.
everything you’ve been looking for; a huge selection, superb quality, and now the convenience of skirted shoulders. Order this time-saving, #638-000-001AS Comp Sight, 8 C31A83�� $ 33.99 Removable rear is windage and el-
customer pleasing kit today and enjoy the speed, precision, and ease with which each of these sights installs. a b evation adjustable to increase your accuracy when hunting deer
SPECS: Brass and Stainless Steel Beads in 31/2" (8.9cm) x 7" (17.9cm) clear plastic box. TOM BUSTER II SIGHT SET - Fits shot- or turkey. Front sights include red and green rods that easily inter-
guns with vent ribs between 11⁄64" and change to maintain sight visibility in low or bright light. Two-dot
#080-000-080AT Brass/SS Shotgun Sight Kit “C”, 8 K56B47�� $ 69.99
7⁄16" wide and a removable front sight. rear sight includes one red, green, white, and black rod for a variety
Rear has two green dots and adjusts for of color combinations. Wing shooting front sight is held securely to
SINGLE PAK SHOULDER BEAD FOR KIT “C” windage and elevation. Front has one ventilated rib with included screws, and will not shake loose under
STOCK # NO. STOCK # NO. STOCK # NO. green and one orange, interchangeable recoil. Rear sight clamps firmly around ventilated rib with machine
STOCK # NO.
#080-001-001AT 10 #080-001-003AT 12 #080-001-005AT 14 rod. Sights fit a variety of shotguns and screws and is used in combination with an additional front sight
#080-001-007AT 16 kit includes five installation screws. ab that secures over the wing sight with included pin, both are easily
#080-001-002AT 11 #080-001-004AT 13 #080-001-006AT 15 #080-001-008AT 17 SPECS: Rear Sight – Steel base, black. 2½" (63mm) long, ¾" (19mm) wide, removed. Rods remove and install easily using light finger pressure
— Advise # — Single Pak Shouldered Bead, each, 8K2D54�� $ 4.49
1
/8" (3.1mm) high. Front sight – 2½" (63mm) long, ¼" (6.3mm) wide, ¼" and the included plastic pick. Requires removal of existing front
high. Includes: 3-56; 3mm x .5; 3mm x .6; 5-40; 6-48. Gunsmith instal- sight and drilling and tapping. a b
lation recommended. SPECS: Fits Browning BPS and Benelli ribs 5/16" (7.9mm) wide, and Moss-
10-PAK SHOULDER BEADS FOR KIT “C” berg or Winchester ribs /8" (9.7mm) wide. Base - Plastic, matte black. Front
3
#638-000-038AS Tom Buster II Sight Set, 8 C27P93�� $ 30.99
STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. Wing Base - 2¾" (7cm) long x ¼" (6.3mm) wide. Front Rifle Base - 2¼"
#080-000-117AT 10 #080-000-119AT 12 #080-000-121AT 14 #080-000-123AT 16 FLAME SIGHT - Replaces the front bead (5.7cm) long x 5/16" (7.6mm) wide. Rear base 2¾" (7cm) x ¾" (1.9mm) wide.
#080-000-118AT 11 #080-000-120AT 13 #080-000-122AT 15 #080-000-124AT 17 with a highly visible fiber optic rod on all Front Rod – Polymer, (1) red, (1) green, 13/8" (3.4cm) long x .1" (2.5mm) dia.
shotguns with a ventilated rib. Screws Rear Rod - Polymer, (1) red, (1) green, (1) white, (1) black, .05" (1.3mm) dia.
— Advise # — 10-Pak Shoulder Bead Refills, 8K17B14�� $ 29.99 are included to fit all front bead thread #638-000-078AT Four In One II, 8C27L93�� $ 30.99
sizes. An easy way to upgrade to a bright
front sight for hunting, target shooting, MAGNI-COMP SIGHT - Innovative tun-
or tactical use. ab nel sight with highly visible red or green
SPECS: Base – steel black oxide finish. Approximately 7/8" (2.2cm) long. rod provides exceptional sight contrast
Fluorescent LitePipe available in green or red. Replaces front sight bead in all light conditions. Front sight dot is
MEPROLIGHT® TRU-DOT MARBLE on all vent ribbed shotguns. only visible when using correct head
DAY/NIGHT SHOTGUN BEAD #223 MID-RIB SHOTGUN BEAD #638-000-040AS Flame Sight, Green, 8 C12A96 �� $ 14.99 alignment, forcing proper shooting
form and increasing accuracy. Red or
#638-000-041AS Flame Sight, Red, 8 C12H96�� 14.99
Constantly Visible Sight Installs Easily, Ensures Perfect Sight Alignment green fiber optic rods are easily inter-
Almost Like Magic! FLASHPOINT & TRICOMP SIGHTS - changed allowing you to change sight color when light conditions
Tapered, ivory-color, mid-rib bead helps prevent Each versatile unit includes triangular change. Designed to fit ventilated ribs with removable front beads.
Unique, universal shotgun sight bead can-ting the gun or aiming over the top of the front and round, full-dot sighting tubes you Contains a compact, stainless steel base that is secured firmly to
stays visible in all light conditions: bright sun, bead. Stake-on design installs easily at center of barrel can snap in and out, depending upon the ventilated rib using included screw, making it ideal for heavy
heavy overcast, late afternoon shadows, deep or 12" to 16" from muzzle. Drill a #45 hole, follow with your situation. Mount to virtually any recoil loads or ported barrels. Sight base uses a locking spring to
woods hunting. Tritium gas light source sealed #226 Bead Sight Reamer, and press-fit in place. a b ventilated-rib shotgun. TriComp unit has keep the light rod secure, yet allows easy interchangability of the
in the center of a blued steel bead. On bright SPECS: Ivory-colored, .080" (2mm) diameter. a steel base and includes 9, 1¼" tubes. red or green rod in the field with provided key. Includes five differ-
days, the shooter sees a black bead with a light center. As the light #579-223-000AT #223 Ivory Mid-Rib Sight, 9 G4L39�� $ 4.99 Flashpoint unit has a steel base and in- ent size sight screws for a variety of ribs. a b
fades, the center becomes a soft green glow. No switches, batteries, cludes 8, 2" tubes, varying in color, size and shape. SPECS: Base - 1704 stainless steel, matte black finish, 1¼" (3.1cm) long.
wires, or charging—the sight is always “on.” Drop-in replacement #226 BEAD SIGHT REAMER - SPECS: TriComp: Base - Steel, black-oxide finish. Approximately 1¾" Rods – polymer, (1) red, (1) green, /16" (17.8mm) long x .07" (1.8mm) dia.
11
bead for Remington 870, 1100, and 11-87. Installation on other shot- Tapers and de-burrs after drilling (45mm) long. Includes (9) tubes. (3) round, .090" (2.3mm) O.D.; (3) round, Includes five screw sizes: 3-56" fits Winchester, Beretta, Benelli, and Ruger
guns may require drilling and tapping. hole for Marble #223 Mid-Rib .125" (3.2mm) O.D.; red, green, white. (3) triangular, .140" (3.6mm) high; shotguns; M3 x .5" fits Browning BPS, Gold and Citori Field guns; M3 x
SPECS: .160" (4.06mm) H x .158" (4.01mm) W. .110" (2.8mm) long shank. Shotgun Bead. red, green, white. Flashpoint: Base - Steel, black-oxide finish. Approxi- .6" fits Browning Citori Hunter; 5-40" fits Mossberg shotguns; 6-48" fits
6-48 thread. SPECS: Steel. 1" (25mm) long, 1/8" (3.2mm) diameter. mately 2½" (64mm) long. Includes (8) tubes. (2) round, .1" (2.5mm) O.D.; Ithaca, Remington, and SKB field models.
#387-314-405AT TRU-DOT Bead, 2B30K56�� $ 34.55 #579-226-000AT #226 Bead Sight Reamer, 9 G4A45�� $ 6.99 red, green. (2) triangular, .14" (3.6mm) high; (2) triangular, .18" (4.6mm) #638-000-072AT Magni-Comp, 8 C33Q71�� $ 37.99
order on the web

MEPROLIGHT® MARBLE TRIJICON SHOTGUN SCATTERGUN TECHNOLOGIES REMINGTON
SHOTGUN NIGHT SIGHT TRITIUM SHOTGUN SIGHT ADJUSTABLE NIGHT SIGHT TRAK-LOCK® II GHOST RING
Always On For Low Light Visibility Gets You On Target Quickly

In Low & Regular Light
Low Light, Tactical Sight System SIGHT SET
Rugged, all-steel replacements for fac- Rugged, steel rear sight has Tritium Provides Excellent Sight
CNC-machined, steel sight uses eye-catching quick-to-use, single screw adjust-
tory sights have high visibility green Tritium Acquisition, Day Or Night
tritium to provide a fast sight picture in low light and an easily-no- ment for windage and elevation
inserts that provide optimum sight definition
ticeable, white ring for regular light. White ring is recessed to protect that won’t work loose with recoil. Self-illuminating, Tritium dot
in low light conditions. Front and rear sights
it from being scratched and to ensure proper light reflection from Ghost ring aperture has two tritium inserts for fast sight pickup. Steel, front sight combined with a large
have their own Tritium source. Constant light
any angle. Five different thread diameters fit most shotguns. a b post front sight has single, glowing tritium dot that puts you on tar- light gathering rear ghost ring provides extremely fast sight acquisi-
level, not affected by weather; maintenance
SPECS: Steel, blued, matte finish. Approximately .32" (8.1mm) long, 3/16" get fast in daylight or darkness. Glass lamps, sealed in aluminum cyl- tion during day or low light conditions. Rear ghost ring is available
free.
(4.8mm) wide, .21" (5.4mm) high. 3/32" (2.4mm) shank length. See price line inders with polished sapphire windows for a crisp outline of light. a b with or without tritium. Trak-Lock rear sight features a single set-
SPECS: Blued steel with green Tritium inserts. M1 Benelli has post front
for thread diameter. 6-48 Oversize (OS) has a diameter of .146" (3.7mm). SPECS: Steel, matte finish, black. Fits plain barrel Rem. 870, 1100 and screw for windage and elevation adjustments. Rugged, low-profile
and ghost ring rear. Fits M1 and M3 Ghost Ring. M2 Benelli has post front
and ghost ring rear. Fits M2, Nova, and Super Nova with ghost ring rear #579-000-078AT 6-48 Tritium Shotgun Sight, 11-87. Can be adapted to other models. Requires drilling and tapping steel body has black parkerized finish for durability. TF12 contains
sight. Tactical Benelli fits M1 Tactical M and Practical. Remington fits guns 9G28Q82 �� $ 34.99 receiver. Front sight epoxies over factory sight. Includes epoxy. tritium dot front sight with standard rear ghost ring. TFR12 includes
originally equipped with rifle sights. Mossberg has front post only. Fits 500 #579-000-079AT 6-48 OS Tritium Shotgun Sight, #892-004-004AT Shotgun Adjustable Night Sights, tritium dot front sight with tritium two dot rear ghost ring for precise
and 590 with factory ghost ring rear sight only. 9G29B49�� 37.99 2H107G00�� $ 107.00 alignment while aiming. Both models available for 12 and 20 gauge.
#579-000-080AT 5-40 Tritium Shotgun Sight, TF12FO contains Tritium front sight only. Fits 12 gauge. a b
#387-400-510AT M1 Benelli Night Sight, 2 B93Q97�� $ 102.45
9G26D96�� 29.99 SPECS: Steel, black parkerized. Fits plain barrel Rem. 870, 1100, 11-87,
#387-000-052AT M2 Benelli Night Sight, 2 B93G97�� 102.45 SPT-12. Adapts to fit other guns. Requires drilling and tapping of receiver;
#387-400-511AT Tact. Benelli Night Sight, 2 B93C97 �� 102.45 front sight epoxies over factory front. Includes rear mounting screws.
#387-310-460AT Rem. 870, 1100, 11-87 Night Sight, TF12 - Tritium front sight with standard rear ghost ring. Fits 12 gauge.
2B91D83�� 101.35
TRUGLO TFR12 - Tritium front sight with tritium rear ghost ring. Fits 12 gauge.
#387-400-500AT Mossberg Night Sight, 2 B50B26�� 55.30 SIMS VIBRATION LABORATORY GLO-DOT SHOTGUN SIGHT TF12FO - Tritium front sight only. Fits 12 gauge.
#800-110-000AT TF12 Tritium Front w/Standard Rear,
DEAD CENTER DUAL-COLOR High Visibility Glowing 12 gauge, 8Z110L85��$ 119.99
Dot No Batteries #800-000-007AT TFR12 Tritium Front/Rear, 12 gauge,
SHOTGUN SIGHT Required 8Z134E98 �� 149.99
MARBLE SHOTGUN SIGHT #800-000-009AT TF12F0 Tritium Front Sight, only,
Dual-Color Fiber Optics Provide Lightweight, fiber-optic rod presents a bright, glowing bead
3 Styles of Thread-In Sights Exceptional Contrast & Clarity; for better visibility in both bright and low light hunting conditions. 8Z61D22 �� 69.99
EXPERT TYPE - A beautiful sight for most ribs. Shoul- Easy To Install Mounts to the top of all ventilated rib shotguns using dual-sided
ders on sight make for easy installation. tape (included). Does not require front bead removal. May also be
SPECS: Bead: 1/8" (3.2mm). Shank length: 3/32" (2.4mm). Gold Red fiber optic rod surrounded installed by drilling and tapping rib, screws not included. a b
bead with 3-56 thread or Ivory (white plastic) bead with 3-56 or 6-48 by a contrasting green outer fiber SPECS: Base - Plastic, matte black. 3" (7.6cm) long. Rods - Polymer, red or
optic sleeve creates a unique, dual- green. 2 /4" (5.7cm) long x .060" (1.5mm) dia. Fits all ventilated rib shotguns.
1
thread. a
b
#708-310-332AT 3-56 Expert, Ivory, 9 G5G52�� $ 6.99
color dot with exceptional contrast #902-100-090AT Red Glo-Dot Sight, 2 K14K02�� $ 14.99 TRUGLO TRU-POINT XTREME
and clarity in all light conditions.
#708-310-631AT 6-48 Expert, Gold, 9 G5L39 �� 6.99 Available in choice of two mount- #902-100-091AT Green Glo-Dot Sight, 2 K14F02�� 14.99 SHOTGUN SIGHT SET
#708-310-632AT 6-48 Expert, Ivory, 9 G5Q52�� 6.99 ing systems that attach the sight to
the shotgun rib without screws, drilling or tapping. Both systems GLO-DOT II - Bright, high-visibility red Fast & Accurate Sighting
EXPERT FIBER OPTIC - A bright, eye catching, fiber optic index against the original front bead to prevent shifting under recoil. or green fiber optic rod snaps in place Highly visible, fiber
sight for ribs. Shoulders on sight make for easy installation. Simple, stick-on Adhesive mounting system installs easily on any behind factory front bead on plain barrel optic sight brings your eye
SPECS: Bead: .0700" (1.7mm) dia. Shank length: 3/32" (2.4mm). ventilated rib .296" wide or wider. Magnetic system uses powerful 12 or 20 gauge shotgun; no gunsmith- Magnum Pro
quickly to the sight in all
Thread size: 3-56 or 6-48. Color: Green or Orange . magnets and interchangeable, low-profile mounting adapters to fit ing required. Notch in base uses factory light conditions. Improves
STK# 3-56 THREAD STK# 6-48 THREAD Color a wide range of rib widths to hold the sight in place. a b bead to locate Glo-Dot II sight correctly accuracy for slug and turkey
SPECS: Rods/Sleeves - Polymer fiber optic. Base - Plastic, black. 2" (5.1cm) along bore axis. guns. Contrasting red front
#708-305-331AT #708-305-631AT Green long x /16" (7.6mm) wide. Adhesive - Center Rod: .06" (1.5mm) dia. Outer
5
SPECS: Base - Plastic, matte black. 21/2" (6.35cm) long. Rods - Polymer, and green rear fiber optic rods
#708-305-332AT #708-305-632AT Orange Sleeve: .12" (3mm) dia. Magnetic - Center Rod: .05" (1.3mm) dia. Outer red or green. 21/4" (5.7cm) long x .078" (2mm) dia. Fits 12 and 20 gauge, are easy to locate in low-light.
— Advise # — Expert Fiber Optic Sight, 9G6M36�� $ 7.99 Sleeve: .08" (2mm) dia. Includes adapters to fit .24", .25", .29", .313", .315", un-ribbed barrels .728" (18.5mm) O.D. or larger. All steel front and rear sights
and .39" wide ventilated ribs. Tru-Point Xtreme
#902-093-728AT Red Glo-Dot II Sight, 2 K16B02��$ 16.99 clamp solidly to rib. Maintains
#100-005-456AT Adhesive Dual-Color Sight, #902-092-728AT Green Glo-Dot II Sight, 2 K16D02�� 16.99 sight settings, prevents shift-
7K10F65�� $ 11.99 ing under recoil. Adjustable for windage and elevation. Magnum Pro
GLO-DOT XTREME - Magneti- Gobble Dot features a conventional rifle-style rear sight with square
TRUGLO #100-004-196AT Magnetic Dual-Color Sight,
cally attached, highly visible fiber notch that works well in most light conditions. Models available for
7K27Q80�� 29.99
STRUT-STOPPER optic sight provides exceptional
sight acquisition in all light con-
5
/16" (7.9mm), 3/8" (9.5mm), 6mm, and 8mm wide ventilated ribs. Tru-
Point Xtreme features a rear sight that includes a square notch sight
SHOTGUN SIGHT ditions. Features four differ-
ent bases with different internal
blade and an easily interchangeable ghost ring. Fits all shotguns
equipped with 1/4", 5/16", or 3/8" wide ventilated ribs. a b
High Contrast Tunnel Sight TRUGLO SHOTGUN mounting dimensions that fit a SPECS: Magnum Pro Gobble Dot - Steel, black. Front Sight - 1.4" (3.5cm)
For Much Improved Accuracy variety of ventilated ribs. Polymer long. Rod - Polymer, red, /16" (23.6mm) long x .029" (.7mm) dia. Rear Sight
15
Advanced tunnel sight with highly vis-

STARBRITE DELUXE SIGHT base snaps onto the rib and is held firmly in place with a high-
strength magnet for quick installation without screws. Includes
- 1.4" long. Rod - Green, .035" (.89mm) dia. Fits 5/16" (7.9mm), 3/8" (9.5mm),
6mm, and 8mm wide ventilated ribs. Tru-Point Xtreme - Aluminum, an-
ible green or red fiber optic rod provides Durable, Machined Aluminum & one red, green, yellow, and amber fiber optic rod. Rods are eas- odized, matte black. Front Sight - 15/16" (3.3cm) long. Rod - Red, 1" (2.5cm)
improved sight contrast in all light conditions. Front sight dot is only Bright Fiber Optic Bead ily interchanged using thumb and finger pressure. Notch in base long x .060" (1.5mm) dia. Rear Sight - 17/16" (3.6cm) long. Ghost Ring - 1/4"
visible when properly aligned, forcing correct shooting form and uses factory bead to locate sight correctly along bore axis. Two (6.4mm) I.D. Rods - Green, .029" (.7mm) dia. Fits 1/4" (6.4 mm), 5/16", or 3/8"
increased accuracy. Features a polymer base that installs over the Highly visible, bright red or green, aiming point lets you concen-
sets of magnets allow mounting sights on two shotguns with dif- wide ventilated ribs.
ventilated rib and is held firmly in place with a high-strength dual trate on following the target and making the shot. Improves sight ac-
ferent width ventilated ribs. Includes pocket sized, steel case for #902-000-002AT .250" Magnum Pro Sight,
sided tape for quick installation without screws. Does not require quisition in all light conditions for fast, almost automatic alignment.
convenient storage. Universal fit for all shotguns equipped with 1/4" 2K47C61 �� $ 50.99
rear sight. Fits all shotguns equipped with 1/4", 7mm, or 5/16" wide ven- Machined aluminum body provides years of rugged service. a b
(6.4mm), 5/16" (7.9mm), 3/8" (9.5mm), or 1/2" (12.7mm) wide ventilated
tilated ribs and removable front beads, including most Remington, SPECS: Body: aluminum, black, anodized finish. Bead: .250" (6.35mm) #902-000-003AT .375" Magnum Pro Sight,
ribs. Includes one base of each size.
Browning, and Ithaca shotguns. a b long, .05" (1.3mm) dia. Shank length: 3/32" (2.4mm). Thread sizes 3-56 tpi, 2K47J61�� 50.99
SPECS: Bases - Plastic, black. (1) .260" (6.5mm), (1).330" (8.4mm), (1) .420"
SPECS: Base - Polymer, black. 3¼" (8.2cm) long. Rods - Polymer, (1) red or 5-40 tpi, 6-48 tpi. #902-000-004AT 6mm Magnum Pro Sight,
(10.7mm), (1) .520" (13.2mm) internal dimension. 2" (5.1cm) long. Rods -
(1) green, 15/16" (3.3cm) long x .06" (1.5mm) dia. Sight fits all shotguns with Polymer, (1) red, (1) green, (1) yellow, (1) amber. 113/16" (2cm) long x .060" 2K47F61�� 50.99
STK# 3-56 STK# 5-40 STK# 6-48 Color
¼" (6.3mm), 9/32" (7mm), or 5/16" (7.9mm) wide ventilated ribs. (1.5mm) dia. Includes (2) sets of magnets & steel carry case. Universal fit #902-000-028AT Benelli Magnum Pro Sight,
#902-000-120AT Strut-Stopper Sight, Red, 2 K14G58��$ 15.99 #902-000-048AT #902-000-050AT #902-000-052AT Red
for all shotguns equipped with 1/4" (6.4mm), 5/16" (7.9mm), 3/8" (9.5mm), or 2K47L61�� 50.99
#902-000-121AT Strut-Stopper Sight, Green, #902-000-049AT #902-000-051AT #902-000-053AT Green 1
/2" (12.7mm) wide ventilated ribs. #902-000-119AT Tru-Point Xtreme Sight,
2K14A58�� 15.99 — Advise # — Starbrite Deluxe Shotgun Sight, 2K7C54�� $ 7.99 #902-000-124AT Glo-Dot Xtreme, 2 K24D01�� $ 25.99 2K38H45�� 40.99
XS SIGHT SYSTEMS SHOTGUN WILLIAMS WILLIAMS
TACTICAL GHOST UNIVERSAL “SLUGGER” FIRE SIGHT SHOTGUN SHORTY RAMP
BRIGHTSIGHTS GUN SIGHT COATING
RING SIGHT SET Quickly Turns Mounts Rifle Sights On
Rib-Equipped Shotguns Highly Visible Paint
For Tactical & Hunting Use Plain Barrel Shotguns Improves Sight Contrast
Into Slug Guns
Includes green tritium front sight and two, interchangeable, fully Steel, screw-on/sol-
Give your favorite Tough, flexible coating
adjustable, rear ghost ring apertures to accommodate long- and der-on ramps with stan-
shotgun a more accurate, provides a highly visible
short-range shooting. Steel wings give added rear sight protection. dard 3/8" dovetail and a checkered rear surface to cut glare. .4375"
rifle-style sight picture in contrast between sights
Dovetailed front sight fits factory sight ramp with minor fitting. a b radius designed for 12 gauge barrels with .875" outside diameter. a b
only minutes. Clamps to vent-rib; fast to install and fast to remove. and target. Provides more
SPECS: Steel, blue, matte finish. Tritium dot/white ring front sight, 3/8" SPECS: Steel, blued, matte finish. 13/4" (4.4cm) long x .612" (15.5mm) wide.
Adjusts for windage and elevation. Front sight provides a red dot that accurate shot placement,
(10mm) high. Rear Sight – base, 1 /2" (38mm) long, /4" (19mm) wide, 1"
1 3
Heights - /8" (3.1mm), /16" (4.7mm), /8" (9.5mm). Accepts narrow ramp
1 3 3
glows in all ambient light conditions. The more light, the brighter it improves sight picture and focal concentration on front sight. Du-
(25mm) long. Small Aperture I.D. - 3/16" (4.8mm); Large Aperture I.D. - sight blades.
glows; won’t “wash out”, even in direct sunlight. U-Notch rear blade rable, won’t harm firearms finish. Easy-to-apply Five Color Kit for
7
/32" (5.6mm). Rear sight requires drilling and tapping, front sight requires
is equipped with a bright green rod on either side of the notch for #962-011-125AT Shorty Ramp, 1/8", 2 F21F99�� $ 22.99 use on rifle, pistol and handgun sights. Three color, Ghost Glow Kit
sight ramp.
precise, low-light sight alignment. a b #962-011-187AT Shorty Ramp, 3/16", 2 F21M99�� 22.99 contains a light activated, luminescent coating for use in reduced
STOCK # FITS PRICE SPECS: Machined aluminum, black, anodized, matte. Universal fit for all #962-011-375AT Shorty Ramp, 3/8", 2 F22A65�� 24.99 visibility situations. a
b
shotguns equipped with 1/4" (6.3mm), 5/16" (7.9mm) and 3/8" (9.5mm) wide, SPECS: 3cc glass bottles. Five Color Kit - Red, White, Green, Orange and
#006-000-108AT Rem. 870/1100/11-87 6K143N80 $ 157.50 Yellow, plus cleaner. Ghost Glow Kit - Green, Yellow and Orange colors
vent ribs. Rear - “U” notch fiber optic. Front - Fluorescent red front bead
#006-000-109AT Mossberg 500/590, Ithaca 37 6K133I53 $ 144.00 on sheared-style blade. Includes wrench and instructions. plus Green, Yellow and Orange luminescent, light activators.
— Advise # — Tactical Sight Set, 6K143N80�� $ 157.50 #962-000-014AT Universal Slugger Fire Sight, #100-000-243AT Gun Sight Five Color Kit, 3 K11H12�� $ 14.95
2F30N01 ��$ 31.99 #100-000-244AT Gun Sight Ghost Glow Kit, 3 K16J31�� 24.95
VANG COMP SYSTEMS
SHOTGUN FIRE SIGHTS - Models for REM 870/1100/11-87
pre-2003 Remington 870/1100, Moss-
XS SIGHT SYSTEMS REMINGTON SHOTGUN berg 500, and Winchester 1300 guns GHOST RING SIGHTS
equipped with slug or turkey barrels and Extremely Rugged;
TACTICAL GHOST RING SIGHT SET factory sight bases. Front sight provides a glowing red dot that’s
Provides Fast Target Acquisition FRONT SIGHT INSERT KIT
easily seen in all ambient light conditions. Fully adjustable, U-notch
Speeds Sight Acquisition rear has two glowing green dots for precise sight alignment. a b Heavy duty Picatinny rail
SPECS: Machined aluminum, black, anodized. Rear - “U” notch fiber op- Make Inserts Quickly & Easily
Convert your shotgun to a tactical with integral ghost ring sight
tic. Front - Fluorescent red front bead on sheared-style blade. Includes naturally centers for fast target In A Variety Of Colors
workhorse. Banded front sight features instructions. Remington fits Remington shotguns with 3/8" dovetail front
green, tritium dot surrounded by a white acquisition during tactical ops.
sight ramp. Front sight features a blade with It’s been several years
ring. Supplied shims ensure barrel band since there was a good,
clamps snugly around muzzle. Con- #962-565-300AT Remington Fire Sights, 2 F23F49�� $ 24.99 white dot and solid steel side
guards for maximum protec- do-it-yourself product
toured rear sight requires drilling and #962-000-001AT Mossberg Fire Sights, 2 F25C95�� 27.99 on the market for making
tapping; includes two interchangeable #962-000-002AT Winchester Fire Sights, 2 F27A76�� 28.99 tion. Aperature is fully adjustable for windage
and elevation using clearly marked adjustment sight inserts, so we decid-
aperture sizes. Completely adjustable for windage and elevation. a b ed the best way to fill the
SPECS: Steel, black, matte finish. Front Sight - Tritium dot with white ring, screws that hold under heavy recoil. Front sight
REMINGTON GHOST RING FIRE SIGHTS - is adjustable for elevation with included tool. Rail allows mounting gap was to go out and de-
3
/4" (19mm) high from top of barrel. Rear Sight - Base, 11/2" (38mm) long, velop our own. The result
Bright, high contrast fiber optic sights with or scopes and red dot sights. Designed for non-ribbed barrels. a b
3
/4" wide, 1" (25mm) long. Small aperture I.D., 3/16" (4.8mm); large aperture is our latest “assist” for the
large aperture, rear ghost ring provide fast, SPECS: Fits Remington 870/1100/11-87 shotguns with non-ribbed bar-
I.D., 7/32" (5.6mm). Fits Rem 870, 1100, 11-87 shotguns with .860-.885" professional gunsmith and
accurate sight alignment in all light condi- rels. Front sight requires soldering with Silvaloy 355 (not included). Ghost
(21.8-22.5mm) muzzle diameters. serious hobbyist - a kit with everything you need to add, change,
tions. The more light, the brighter the beads ring/rail requires drilling and tapping receiver for 8-40 tpi screws. Includes
#006-000-107AT Tactical Ghost Ring Sight Set, glow. Front sight has a single red insert, rear mounting hardware and instructions. Front Sight - Steel, in-the-white, or rebuild colored front sight inserts on revolvers quickly and easily.
6K165K98 ��$ 181.80 ghost ring has two green inserts to form .110" (2.8mm) diameter white dot. Ghost Ring/Rail - One-piece, hard Although primarily designed for wheelguns, it’ll also let you make
#006-000-118AT Banded Front Sight, only, an easy-to-align, 3-dot sight picture. Fits custom inserts for a variety of rifles, shotguns, and pistols. Sight in-
handgun sights
anodized aluminum sight body and rail. 2.2 oz.(62.4g) weight. Rail - 23/4"
6K73J19�� 81.00 Remington shotguns with 3/8" dovetail front (7cm) long x .830" (21mm) wide. Aperature - Steel, black. .23" (5.8mm) I.D. serts offer many benefits for target shooters and hunters, especially
sight ramp. a b .5" (mm) high from top of receiver to center of aperature. in situations requiring fast, accurate front sight acquisition, like dawn
SPECS: Steel front 3/8" dovetail sight. Aluminum rear sight. Black, matte and dusk, when game is more likely to be active. Never again replace
#100-003-640AT Rem. 870/1100/11-87 Ghost Ring a perfectly good front sight because it’s too hard to see in low light,
finish. Fiber optic insert. Bead - 1/16" (1.6mm) dia. Ghost Ring - .15" (3.8mm) Front Sights, 6K61B91�� $ 69.99
dia. aperature. your eyes aren’t as good as they used to be, or because the insert has
#100-004-335AT Rear Ghost Ring Sight w/Rail, faded, broken, or fallen out. Our kit contains everything you need to
#962-000-083AT 2003 & Earlier Ghost Ring Fire Sights,
XS SIGHT SYSTEMS SHOTGUN 2F24E42��$ 25.99
6K180P12�� 189.99 make professional looking inserts formed to the exact contours of
your gun’s front sight. Mix the liquid acrylic and powdered activator
BIG DOT TRITIUM FRONT SIGHT with the concentrated dye to create bright, high-contrast inserts
ITHACA 37 FIRE SIGHT - Contrasting, that are stronger and more durable than factory originals at a frac-
Installs Easily Over The green rear and red front dots provide tion of the cost of replacement or custom sights. Kit includes dyes
Existing Bead Sight excellent sight visibility. Eye-catching in five popular colors—red, green, orange, yellow, and white. Step-
colors give fast, accurate sight alignment XS SIGHT SYSTEMS REM 870/MOSS 500 by-step instruction booklet show you how to mix the ingredients
High-visibility Tritium dot
front sight surrounded by a
against dark backgrounds. Fully adjust-
able for windage and elevation; replaces
SHOTRAIL (the ratios aren’t that critical so it’s tough to screw up) and create
forms to install inserts that won’t shoot loose, even on the hardest
large white ring helps improve target focus and low light sight ac- factory rear sight and front bead. Fits Gives Your Shotgun A Rifle- recoiling guns. We also explain, in detail, how to hand cut a dovetail
quisition and sight recovery after muzzle flash. Installs over existing Deerslayer models, no gunsmithing required. Metal body con- Style Sight Picture for an insert on a gun that doesn’t already have one. With a hardening
front sight beads from .125" - .140" diameter by filling the cavity on struction for durable service. ab time of around 20 minutes, it’s so fast and easy you’ll want to add in-
the underside of the sight with Brownells Acraglas Gel, then press- SPECS: Aluminum, anodized, matte black. Rear - 21/2" (6.4cm) long, fits Easy-to-install tactical serts to get the best accuracy and maximum versatility from all your
ing the sight over the bead and allowing it to fully cure. If existing nominal /8" dovetail. Front blade - 5/8" (15.9mm) long. sight set has a Picatinny-rail
3
iron-sighted guns. Refill supplies sold separately, so you can replace
bead is too small or too large, replace with Brownells #6 bead for section with ghost ring rear
#962-000-017AT Ithaca 37 Fire Sight, 2 F32E14��$ 34.99 only the ingredients you use up rather then buy a whole new kit. a b
3-56 threads or #26 for 6-48 threads. Some shotgun barrels may sight and banded front sight. SPECS: Kit contains: 1 oz. (29.57 ml) Liquid Acrylic; 2 oz. (59.15 ml) Pow-
require drilling and tapping of existing hole to 6-48 for installation of Picatinny rail is pre-drilled for factory optic mount holes. Ghost ring dered Activator; .05 oz. (1.5 g) each of red, green, orange, yellow, and
#26 Brownells bead. Remington Pedestal model with stepped bot- is adjustable for windage and elevation. Banded front sight post has .19oz. (5.3g) of white pigment; 5 mixing cups; complete instructions.
tom fits Remington shotgun barrels with front sight pedestal. Vent a Tritium dot for visibility in all light conditions. Fits barrels less than
Rib model with flat bottom fits shotgun barrels with ventilated ribs. #081-000-370AT Front Sight Insert Kit, 1 H48N16 �� $ 60.99
8.860" in diameter that do not have a front sight rib or base. a b
Plain Barrel model with cupped bottom fits round shotgun barrels. #006-000-158AT Remington Pedestal Big Dot Tritiuim, SPECS: Picatinny Rail – Aluminum, anodized, black. Front/Rear Sights - #081-000-371AT Powdered Activator, 2 oz., 1 H8I12�� 12.47
Includes instructions. a b 6K58A23 �� $ 63.90 Stress-proof steel, black oxide finish. Fits barrels with .840" to .860" O.D. #081-000-372AT Liquid Acrylic, 1 oz., 1 H16H93�� 20.97
SPECS: Machined steel, black, matte finish. Big Dot .161" (4mm) diameter. #081-000-375AT Red Pigment, .05 oz., 1 H3H85�� 4.99
Fits beads from .125" (3.2mm) to .140" (3.5mm). Remington Pedestal fits #006-000-159AT Vent Rib Big Dot Tritium, 6 K58L23�� 63.90 #006-000-185AT Mossberg 500/590/930 ShotRail,
Remington front sight pedestals. Vent Rib fits ventilated ribs. Plain Barrel #006-000-160AT Plain Barrel Big Dot Tritium, 6K162N66�� $ 180.00 #081-000-376AT Orange Pigment, .05 oz., 1 H3Q93�� 4.99
fits round barrels. Includes instructions. 6K58M23�� 63.90 #006-000-186AT Rem 870 ShotRail, 6 K162E66 �� 190.80 #081-000-377AT White Pigment, .19 oz., 1 H4E07 �� 4.99
order on the web


70 Rifle Shotgun Sights P278 293

Uploaded by

Copyright:

Available Formats

70 Rifle Shotgun Sights P278 293

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

70 Rifle Shotgun Sights P278 293

Uploaded by

Copyright:

Available Formats

UNIVERSAL HERITAGE ARMS REMINGTON 600 HIVIZ

VENTILATED RIB FIBER OPTIC RIFLE SIGHT

REAR SIGHT ELEVATOR KIT SIGHT DOVETAIL SLOT BLANK

order on the web

CONTOUR FRONT SIGHT

order on the web

RING PEEP SIGHT WILD WEST GUNS LEVER RIFLE SIGHTS

aperture adjustment tool and Allen wrenches. #962-161-251AT NA .260" Medium

order on the web

No need to worry about breaking a sight

order on the web

WESSON & HARRINGTON #006-000-141AT

order on the web

order on the web

N.E.C.G. SHOTGUN SIGHT BEAD LYMAN SHOTGUN SIGHT

order on the web

Always On For Low Light Visibility Gets You On Target Quickly

Advanced tunnel sight with highly vis-

order on the web

You might also like