Scribd Logo
Upload

Welcome to Scribd!

  • 326 views

    Unit - I Electronic Components & Signals: 22225 BEC MCQ (Basic Electronics) Chapter-Wise

    Uploaded by

    Shobhit Kumar
    This document contains multiple choice questions (MCQs) from chapters on basic electronics components and signals, diodes and their applications, bipolar junction transistors, and field effect transistors. There are 10 questions from each chapter, for a total of 40 questions. The questions test knowledge of properties of components like resistors and capacitors, characteristics and applications of diodes and transistors, and terminology used in electronics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unit - I Electronic Components & Signals: 22225 BEC MCQ (Basic Electronics) Chapter-Wise

    Uploaded by

    Shobhit Kumar
    326 views9 pages
    This document contains multiple choice questions (MCQs) from chapters on basic electronics components and signals, diodes and their applications, bipolar junction transistors, and field effect transistors. There are 10 questions from each chapter, for a total of 40 questions. The questions test knowledge of properties of components like resistors and capacitors, characteristics and applications of diodes and transistors, and terminology used in electronics.

    Original Title

    22225_BEC_MCQ

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains multiple choice questions (MCQs) from chapters on basic electronics components and signals, diodes and their applications, bipolar junction transistors, and field effect transistors. There are 10 questions from each chapter, for a total of 40 questions. The questions test knowledge of properties of components like resistors and capacitors, characteristics and applications of diodes and transistors, and terminology used in electronics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    326 views9 pages

    Unit - I Electronic Components & Signals: 22225 BEC MCQ (Basic Electronics) Chapter-Wise

    Uploaded by

    Shobhit Kumar
    This document contains multiple choice questions (MCQs) from chapters on basic electronics components and signals, diodes and their applications, bipolar junction transistors, and field effect transistors. There are 10 questions from each chapter, for a total of 40 questions. The questions test knowledge of properties of components like resistors and capacitors, characteristics and applications of diodes and transistors, and terminology used in electronics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    22225 BEC MCQ (Basic Electronics) Chapter-Wise

    2nd SEM ALL SUBJECT MCQ : click here

    Unit – I Electronic Components & Signals


    1. For 180 K ohm resistor with 10 % tolerance, the color band will be in the
    sequence of a. Brown-grey-yellow-gold
    b. Brown-grey-yellow-silver
    c. Brown-blue-yellow-silver
    d. Brown-grey-yellow-gold
    Answer: brown-grey-yellow-silver
    2. Transistor is
    a. A passive component
    b. Active component
    c. None of these
    d. Both a & b
    Answer: active component
    3. Inductor is
    a. Active component
    b. Passive component
    c. None of these
    d. Both a & b
    Answer: passive component
    4. In electronics the term IC denotes
    a. Industrial control
    b. Integrated circuits
    c. Internal combustion
    d. International circuits
    Answer: integrated circuits
    5. What is the unit of inductance?
    a. Joule
    b. Farad
    c. Henry
    d. Watts
    Answer: henry
    6. Which value is equal to one Pico farad?
    a. 106farad
    b. 1012 farad
    c. 10−6farad
    d. 10−12 farad
    Answer: 10−12 farad

    7. Which of the following elements comprise of the passive


    devices? a. Resistors, capacitors & SCRs
    b. Vacuum tubes, SCRs & diodes
    c. Transformers, inductors & diodes
    d. Transformers, TRIACs & DIACs
    Answer: transformers, inductors & diodes
    8. Active devices can also be used as …..
    a. Amplifiers
    b. Choppers
    c. Converters
    d. Inverters
    Answer: amplifiers
    9. A CRO is a
    a. Cathode ray oscillator
    b. Cathode ray oscilloscope
    c. Capacitor- resistor oscillator
    d. Capacitor- resistor output
    Answer: cathode ray oscilloscope
    10. There are two main characteristics of a
    resistor are …. a. Current & voltage
    b. Current & power
    c. Resistance & power
    d. Resistance & current
    Answer: resistance & power

    Unit – II Diodes & their Applications


    1. The DC current through each diode in a bridge rectifier equals:
    a. The load current
    b. Half the DC load current
    c. Twice the DC load current
    d. One-fourth the DC load current
    Answer: the load current
    2. In a power supply diagram, which block indicates a smooth
    dc output? a. Transformer
    b. Filter
    c. Rectifier
    d. Regulator
    Answer: regulator
    3. Testing a good diode with an ohmmeter should indicate
    a. High resistance when forward or reverse biased
    b. Low resistance when forward or reverse biased
    c. High resistance when reverse biased & low resistance when
    forward biased d. High resistance when forward biased & low
    resistance when reverse biased
    Answer: high resistance when reverse biased & low resistance when forward
    biased
    4. Shunting the ac component away from the load is the task of a:
    a. Transformer
    b. Filter
    c. Regulator
    d. Rectifier
    Answer: filter
    5. When used as a voltage regulator, Zener diode is normally
    a. Not biased
    b. Forward biased
    c. Reverse biased
    d. None of the above
    Answer: reverse biased
    6. For a germanium diode, the barrier potential is
    a. 0.3 volt
    b. 0.3 eV
    c. 0.7 volt
    d. 0.7 eV
    Answer: 0.3 volt
    7. The output from an unfiltered half wave or full wave
    rectifier is a a. Smooth DC voltage
    b. Steady DC voltage
    c. Pulsating DC voltage
    d. AC voltage
    Answer: pulsating DC voltage
    8. In the breakdown region, a Zener diode behaves like a
    ……… source a. Constant voltage
    b. Constant current
    c. Constant resistance
    d. None of the above
    Answer: constant voltage
    9. A Zener diode has …… breakdown
    a. Undefined
    b. Zero
    c. Sharp
    d. None of the above
    Answer: sharp
    10. The maximum efficiency of a half wave
    rectifier is …… a. 40.6 %
    b. 81.2 %
    c. 50 %
    d. 25 %
    Answer: 40.6 %

    Unit- III Bipolar Junction Transistor


    1. In a BJT
    a. The base region is sandwiched between emitter & collector
    b. The collector is sandwiched between base & emitter
    c. The emitter region is sandwiched between base & collector
    d. None of the above
    Answer: the base region is sandwiched between emitter & collector
    2. Amplifiers & oscillators using BJT, operate in …… region
    a. Inverted mode
    b. Active….
    c. Cut off
    d. Saturation
    Answer: active
    3. The arrow in a transistor terminal represents
    a. Emitter
    b. Collector
    c. Base
    d. None of the above
    Answer: emitter
    4. Transistor is a device which is a
    a. Transferring voltage device
    b. Current operated one
    c. Power operated one
    d. Voltage operated one
    Answer: current operated one
    5. Transistor works as an open switch when emitter junction is ….. biased & collector
    junction is …. biased
    a. Forward, forward
    b. Reverse, reverse
    c. Reverse, forward
    d. Forward, reverse
    Answer: reverse, reverse
    6. When a transistor is in active region the resistance is between
    a. Emitter to collector
    b. Base to collector
    c. Emitter to base
    d. All of the above
    Answer: base to collector
    7. In a NPN transistor, ………. are the
    minority carrier. a. Electron
    b. Holes
    c. Donor ions
    d. Acceptor ions
    Answer: holes
    8. In a transistor ……..
    a. IB=IC+IB
    b. IC=IE+IB
    c. IE=IC+IB
    d. IE=IC-IB
    Answer: IE=IC+IB
    9. The value of α of a transistor is ……
    a. 0
    b. 1
    c. More than 1
    d. Less than 1
    Answer: less than 1
    10. The value of β of a transistor is ……
    a. Between 20 & 500
    b. 1
    c. Less than 1
    d. 0
    Answer: between 20 & 500

    Unit – IV Field Effect Transistor


    1. Junction Field Effect Transistor (JFET) contain how many diodes?
    a. 4
    b. 3
    c. 2
    d. 1
    Answer: 2
    2. A “U” shaped, opposite-polarity material built near a JFET-channel center
    is called the: a. Gate
    b. Block
    c. Drain
    d. Heat sink
    Answer: Gate
    3. What is the input impedance of a common-gate configured JFET?
    a. Very low
    b. Low
    c. High
    d. Very high
    Answer: very low
    4. JFET terminal “legs” are connections to the drain, the gate, & the:
    a. Channel
    b. Source
    c. Substrate
    d. Cathode
    Answer: source
    5. With the E-MOSFET, when gate input voltage is zero, drain
    current is: a. At saturation
    b. Zero
    c. IDSS
    d. Widening the channel
    Answer: zero
    6. How will electrons flow through a p-channel JFET?
    a. From source to drain
    b. From source to gate
    c. From drain to gate
    d. From drain to source
    Answer: from drain to source
    7. A JFET is also called ……. Transistor
    a. Unipolar
    b. Bipolar
    c. Unijunction
    d. None of the above
    Answer: unipolar
    8. A MOSFET is sometimes called ……… JFET
    a. Many gate
    b. Open gate
    c. Insulated gate
    d. Shorted gate
    Answer: insulated gate
    9. The pinch-off voltage of a JFET is about ….
    a. 5 V
    b. 0.6 V
    c. 15 V
    d. 25 V
    Answer: 5 V
    10. The gate voltage in a JFET at which drain current becomes zero is
    called …….. voltage a. Saturation
    b. Pinch-off
    c. Active
    d. Cut-off
    Answer: pinch-off

    You might also like