Scribd
Upload
30 views1 page

Bluetooth Settingx

Uploaded by

organik making
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
30 views1 page

Bluetooth Settingx

Uploaded by

organik making
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

#include <SoftwareSerial.

h>
SoftwareSerial hcSerial(10, 11); // RX, TX

String fromPC = "";

void setup() {
Serial.begin(9600); // hardware serial for the USB-PC
hcSerial.begin(9600); // software serial Arduino to HC-06 (9600 is default)

// print instructions
Serial.println("HC-06 AT Command Programming");
Serial.println(" -- Command Reference ---");
Serial.println("AT (simply checks connection)");
Serial.println("AT+VERSION (sends the firmware verison)");
Serial.println("AT+NAMExxxxx (to change name to xxxxx");
Serial.println("AT+PINnnnn (to change password to 4 digit nnnn");
Serial.println("AT+BAUDn (to change to baud rate #1");
Serial.println(" BAUD1 = 1200");
Serial.println(" BAUD2 = 2400");
Serial.println(" BAUD3 = 4800");
Serial.println(" BAUD4 = 9600");
Serial.println(" BAUD5 = 19200");
Serial.println(" BAUD6 = 38400");
Serial.println(" BAUD7 = 57600");
Serial.println(" BAUD8 = 115200");
}

void loop() {
// Read from HC-06
if (hcSerial.available()) {
while(hcSerial.available()) { // While there is more to be read, keep reading.
Serial.print((char)hcSerial.read());
}
}

// Read from PC
if (Serial.available()){
delay(10); //
fromPC = (char)Serial.read();

if (fromPC == "r" || fromPC == "n") { // don't send carriage returns to HC-06

Serial.println(); // echo it back to the PC


}
else {
hcSerial.print(fromPC); // show the HC-06 responce
Serial.print(fromPC); // echo it back to the PC
}
}
}

You might also like