2006

PERMIT NO 1352
US POSTAGE

AKRON, OH
PRSRT STD

PAID
Components Catalog
The best golf components...anywhere.

TP7 Irons DSW

Page 3
Hybrid
Page 7

Trident SS Irons
Page 10 Trident RD
Hybrid
Page 6

Trident
Tri-Screw
Page 2

Crown Regal Trident

Ti Heads XF-20
Page 28 & 29 Page 5

New 3 Ball
Blade Putter Starship putter
Page 42 Page 42

1.800.451.1995
www.proswing.com
Pro Swing , Inc - 330 Grandview Ave - Wadsworth, OH 44281
 Trident Tri-Screw 460cc Specs for the 460cc Ti drivers Specs for the TS-10 fairway woods
stock #460TS club #1 #1 #1 #1 #1 club #3 #5 #7
15o 19o 22o
o o o o o
RH: 8 , 9 , 10 , 12 , and 15 loft 8o 9o 10o 12o 15o loft
o o
LH: 9 , 10 and 12
o
lie 57o 57o 57o 57o 57o lie 58o 59o 60o
weight 206 206 206 206 206 weight 212 218 225
Requires our patented hosel collar insert system.
face ht 56 56 56 56 56 face ht 38 36 35
volume 460 460 460 460 46 0 volume 215 205 190
2o closed face. hardness: 41 Screw diagram is a
335 hosel bore hosel depth: 36mm guideline only. Use ANY
heel/toe #1: 114mm bottom of hosel to combination that works
SP-700 heel: 28mm for you.

Slight
Neutral Fade Bias Hook Bias Hook Bias

Ti head comes with: Trident Tri-Screw Deep Red

2-6g screws, 1-4g screw. stock #460DRTS
(additional screws available o o
RH only: 9 , 10 , and 12
o

in: 2,4,6,8 and 10g). Extra

screws sold separately.
see page 69 for screws
Patented Design

Trident TS-10
Fairway Woods
stock #TS10W
RH only: #3, #5 and #7

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW
Exclusive

Now updated to 460cc. Trident Golf first introduced a high performance screw weight design in 1999. Since tm
then,
screw weight designs have become so popular, that even the largest pro line companies, like Taylor Made , are
copying this design feature. The TS-10 Tri Screw head is the next evolution of this design. Made with three
removable weight screws (no special tool needed) spaced in an optimal balance configuration, the new TS-10 is the
ultimate driver in stability and forgiveness. The back weights re-position the center of gravity low and deep in the
clubhead. This decreases sidespin and backspin for longer carry and improved accuracy. In addition, the weights can be
adjusted for lighter or heavier head weight to compensate for shaft length and weight or to add/decrease
tm
draw bias. The
TS-10 ti also offers more weight variations, flexibility and ball flight options than Taylor Made does. We think the
TS-10 ti with max COR face, will out perform pro line drivers in both accuracy and distance. We also offer TS-10
steel fairway woods in #3, #5 and #7. Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 UST V2 65 Aldila NV
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex UST Proforce
UST Harmon CB 60 Grafalloy Comp NT Grafalloy ProLite 35
[ 2 ] Irod Driver Trident Fuji-L Trident Fuji-LD
TP7 Dual Screw Irons club #3 #4 #5 #6 #7 #8 #9 PW SW
loft 21o 23o 27o 29o 33o 37o 41o 46o 54o
stock #TP7I lie 61o 61o 62o 62o 63o 63o 64o 64o 65o
RH: 3-PW, SW weight 246 253 260 267 274 282 290 300 310
offset 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5
Requires our patented hosel collar insert system.
bounce 8o 8o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 85mm
blade height #5: 55mm
431 stainless
hardness: 22
bottom of hosel to heel: 29mm
hosel depth: 28mm
topline width: 9mm
sole width: 27mm
modified square grooves
chrome finish
RH only

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, and SW

This head requires an insert.

insert ring insert ferrule
stock #hciri stock #insfi

Comes standard with two 8 gram screws.

Other weight screws sold seperately.

Weight screws for the TP7 Iron:

4 gram weight: stock# T7SC4
6 gram weight: stock# T7SC6
8 gram weight: stock# T7SC8
10 gram weight: stock# T7SC10
Exclusive

The new TP7 dual screw weight irons combine the best technologies into a single design. The TP7 started as a
modern perimeter weighted iron design with a rearward muscle back weight feature. Added to that are removable
dual weight screws so one can change trajectory, fade or hook tendency, swing weight, and improve off center hits.
This low rearward screw weight feature makes it exceptionally easy to get shots airborne and gives the TP7 one of
the lowest centers of gravity ever in an iron. This new iron also has more offset than our other designs, which
helps the head to square at impact, especially in the mid to long irons. The new TP7 will definitely improve your
game no matter what your handicap.
Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 Aldila TC Pro TT Black Gold
Custom Lite Rifle
Dynalite Gold SL
[ 3 ]
 TRIDENT WB-40 Titanium Specs for the WB-40 Ti drivers
stock #WB40TI club #1 #1 #1 #1
loft 8o 9o 10o 12o
RH only: 8o, 9o, 10o ,12o lie 57o 57o 57o 57o
Requires our patented hosel collar insert system. weight 201 201 201 201
face ht 57 57 57 57
volume 459 459 459 459

Tech Info
.350 hosel bore
heel/toe #1: 105mm
SP-700 Ti (C-cup face)
hardness: 41
hosel depth: 30mm
bottom of hosel to heel: 25mm

requires insert hcir3

2 degree closed face
RH only

.350 hosel bore

Requires Our Patented Insert System
.350 Insert
Patented Sole Design stock #HCIR3

Exclusive

This is the largest oversized USGA legal Ti driver available in America!! The new very golfer friendly WB-40
TI oversized volume is achieved by taking a 490cc ti body and attaching our patented “inverted sole” design
that effectivelytmlowers the legal measured volume to 459cc. Advanced forging techniques combined with a thin
2.1mm C-cup face allow maximum distance with more low and rearward weight for extra forgiveness and
optimal trajectory. The extra large face means more ball reboundtmand distancetmfrom off center hits.
tm
Check it out
- the new WB-40 will out preform any ti driver from Golfsmith , Callaway , or Taylor Made . Guaranteed.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident T4 A and L flexes Trident T4 R & S flexes Grafalloy Blue
UST XL UST V2 65 Aldila NV
Grafalloy ProLaunch 65 Penley Tour Lite R and S Penley Stealth 70
Grafalloy Comp NT Grafalloy ProLite 35
Aldila NVS
[ 4 ]
Trident XF-20 Titanium Specs for the XF-20 Ti drivers and Steel Fairway woods
stock #T20TI club #1 #1 #1 #3 #5 #7
loft 9o 10o 12o 15o 20o 23o
RH only: 9o, 10o, 12o lie 57o 57o 57o 56o 57o 58o
Steel Fairway woods #3, #5, #7 weight 201 201 201 212 220 228
Requires our patented hosel collar insert system. face ht 55 55 55 42 42 41
volume 460 460 460 225 220 215

Tech Info
.335 hosel bore
heel/toe #1: 100mm
Exclusive
SP-700 Ti (C-cup face)
hardness: 41
hosel depth: 30mm
bottom of hosel to heel: 25mm

requires insert hcir2 or insfw

2 degree closed face
RH only

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Patent Pending Design

Concave Sole

The new XF-20 Ti is 460cc’s of dynamite. Made with a forged c-cup design and ultra thin VFT face, 2.8 to
2.1mm thickness, the XF-20 pushes the legal core rating to the edge. The unique “spur” sole shape sweeps more
mass towards the rear center of the head for a softer feel and better trajectory, plus reduces wind drag. An
internal weighting system lends a slight draw bias to shots for maximum accuracy.
The matching fairway woods are designed for a mid trajectory and easy playability. Being crafted from 455ss
steel allows a thinner face than 17-4 for maximum distance.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST Harmon CB60 ProLaunch 65 AccuFlex Icon
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Penley Stealth 70
ProLaunch 45/55 AccuFlex Evolution Grafalloy ProLite 35
Irod Driver UST V2 65 Trident Fuji-LD
Grafalloy Comp NT
Trident Fuji-L
[ 5 ]
 Trident Model RD Hybrid club #3w #5w #7w #3i #4i #5i #6i #7i
loft 15o 18o 21o 21o* 24o 27o 30o 34o
stock #HYRD tip diam .335 .335 .335 .370 .370 .370 .370 .370
RH: 15o, 18o, 21o *, 24o, 27o, 30o and 34o lie 58o 58.5o 59o 59o 60o 61o 62o 62.5o
LH: 18o, 21o , 24o and 27o weight 225 230 235 242 245 252 259 266
face ht 32 32 32 32 32 32 32 32
Must be countersunk for use with graphite shafts.
volume 130 130 120 120 115 115 100 100
Can not be bent for loft or lie.
* 21o available in .335 and .370 hosel bore (RH only).
Tech Info
.335 or .370 hosel bore
Recommended Lengths: heel/toe #1: 90mm
15o: 41-42” 450ss Alloy
18o: 41-41.5” hardness: 36
21o: 40” (.335) hosel depth: 30mm
21o: 39” (.370) bottom of hosel to heel: 15mm
24o: 38.5”
27o: 38” requires ferrule
30o: 37.5” square face angles
o
34 : 37” RH/LH
. comes standard with 18g screw installed.
. available screws: 7.5g, 14g, 18g, 20g, 22g, and 24g.
. extremely easy to hit!
. multiple loft selection to fill special need or gap.
. weight screw adds forgiveness and performance.
Exclusive
This head requires a ferrule.
we recommend:
3/8” Black
.370 stock #FMBIS
.335 stock #FBHWS

Weight screws for the Trident RD Hybrid

7.5 gram weight: stock# HYSC75
14 gram weight: stock# HYSC14
18 gram weight: stock# HYSC18
20 gram weight: stock# HYSC20
22 gram weight: stock# HYSC 22
24 gram weight: stock# HYSC24
extra weight screws sold separately
Hybrid clubs have become very popular with good reason. They are much easier to hit than most long irons and
even some fairway woods. Now, Trident introduces the EASIEST TO HIT AND BEST PERFORMING
HYBRID CLUBS ON THE MARKET! Trident invented the modern screw weight driver and has now incor-
porated screw weighting in a hybrid design. With the adjustable screw weight, it is easy to change club weight
and trajectory. In addition, with more weight under and behind the ball, even the highest handicapper can hit a
solid, accurate shot even off the tightest lie. But, to make hitting great shots even easier, we added our reduced
drag sole (first introduced on our RD driver in 2001). Made with a hardened 450 alloy and thin rebound face,
the RD Hybrids are THE BEST PERFORMING AND EASIEST CLUBS TO HIT ON THE MARKET.
Recommended For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Shafts (.335): Trident Hybrid Xrt UST iRod Fairway
Trident Xrt
Trident Lite Weight Trident UL 3.5 Dynamic Gold
Cross Fire Trident Power Hinge
ProLaunch

Recommended For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Shafts (.370): Cross Fire Trident Hybrid Xrt Dynamic Gold SL
UST iRod Iron Trident Vibracore Diamond Rifle
TX-90 Custom Lite
[ 6 ] ProLaunch Bubble Graphite
Trident DSW Hybrid club #3w #5w #3i #4i
loft 16o 19o 22o 25o
stock #DSHY tip diam .335 .335 .370 .370
RH: 16o, 19o, 22o , 25o lie 59o 59.5o 60o 60.5o
Must be countersunk for use with graphite shafts. weight 230 237 244 251
Can not be bent for loft or lie. face ht 33 33 32 32
volume 110 110 100 100

Tech Info
.335/.370 hosel bore
Recommended Lengths: heel/toe: 85mm
16o: 41-42” 455ss Steel
19o: 41-41.5” hardness: 36
22o: 39” hosel depth: 32mm
25o: 38.5” bottom of hosel to heel: 18mm
face thickness: 2.85mm
square face angles
RH only

Weight screws for the DSW Hybrid:

4 gram weight: stock# DWSC4
6 gram weight: stock# DWSC6
8 gram weight: stock# DWSC8
10 gram weight: stock# DWSC10
Exclusive

. comes standard with 2 eight gram screws

. available screws: 4g, 6g, 8g, and 10g
. extremely easy to hit!
. weight screw adds forgiveness and performance.
. extra screws sold separately
. slightly offset hosel
This head requires a ferrule.
we recommend:
3/8” Black
stock #FMBS
#FMBIS

Introducing a new level of hybrid technology! All the improvement features of the RD Hybrid plus: The new
model DSW hybrid features innovative ball flight customization in a tour hybrid design. Dual screw weights are
positioned in the toe and heel areas and can be changed with heavier or lighter screws to change ball trajectory,
draw, or fade characteristics, and even change the feel of the club. The rearward swept sole rail reduces drag
from all types of lie. The head is made from 455ss steel that allows for a thin face design for
unbelievable distance from a hybrid design. Plus a slightly offset hosel prefered by most golfers.
Recommended
Shafts .335:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST Irod Fairway Trident Hybrid Xrt UST ProForce 75
Dynalite Gold Trident UL 3.5 Dynamic Gold
Trident Lite Weight
Recommended
Shafts .370:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Xrt Trident Hybrid Xrt Dynamic Gold SL
Dynalite Gold SL Trident Vibracore Diamond Rifle
[ 7 ]
TT Lite
Trident 460 VTT Specs for the 460 VTT driver
club #1 #1 #1 #1 #1
stock #460VTI loft 8o 9o 10o 12o 15o
RH: 8o, 9o, 10o, 12o and 15o lie 56o 56o 56o 56o 56o
LH: 9o, 10o and 12o weight 200 200 200 200 200
Requires our patented hosel face ht 56 56 56 56 56
collar insert system. volume 460 460 460 460 460

. used at USGA Senior Amateur!

. used at PGA Champions Tour events!
. unbreakable C-Cup face design.
Tech Info:
.350 hosel bore
heel/toe #1: 103mm
SP-700 Ti (C-cup face)
hardness: 46
hosel depth: 36mm
bottom of hosel to heel: 32mm
.350 hosel bore
requires insert hcir3
1-2 degree closed face
RH/LH

Requires Our Patented Insert System

.350 Insert
stock #HCIR3

Trident 460VTT Deep Red

stock #460DRVTI
RH only: 9o, 10o, and 12o

Extremely attractive
club with our matching
Trident T4XL shafts

Exclusive

Our 460 VTT is made with our C-cup design to ensure maximum COR with the most consistent shot pat-
tern, even for off-center hits, of any legal driver! Off-center forgiveness is enhanced with an expanded, legal
head volume of 460cc. The really large and deep C-cup face guarantees you will power the ball out there a
long, long way! The neutral weighting contributes to a boring trajectory with very little backspin for even
more distance. The 460 VTT is really a terrific distance head from Trident Golf.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident T4 A and L flexes Trident T4 R and S flexes Penley Stealth 70
UST XL A-flex Trident 350 UL Grafalloy ProLite 35
Grafalloy Comp NT Aldila NV
UST V2 65 UST ProForce
[ 8 ] Aldila NVS
Trident VTT Steel club #1 #1 #3 #5 #7 #9
loft 10o 12o 15o 19o 23o 27o
stock #VTTW lie 55o 55o 56o 57o 58o 58o
RH only: 10o, 12o, #3, #5, #7 and #9 weight 200 200 208 218 225 230
Requires our patented hosel collar insert system. face ht 44 44 40 38 36 35
volume 230 230 215 205 190 180

Tech Info:
.335 hosel bore
heel/toe #1: 86mm
450ss steel
hardness: 44
hosel depth: 36mm
bottom of hosel to heel: 28mm
requires insert hcir2 or insfw
square face angles
RH only

. medium high trajectory.

. great match with our VTT Ti.
. oversized for forgiveness.

Exclusive

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

The oversized VTT metal woods are a perfect compliment to the VTT Ti driver. These woods are made
with a 450st alloy that allows us to make a thinner variable face for increased distance. The deep hosel
design adds stability and consistency for greater accuracy to all shots. The sole design of the VTT woods
helps the head to slide along the turf instead of digging in, which really makes the fairway woods easy to hit
solidly. We think the VTT woods are better performing than expensive pro line heads.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight Trident Power Hinge UST Proforce 75
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex AccuFlex Icon
ProLaunch 45/55 Accuflex Evolution Grafalloy ProLite 35

[ 9 ]
 Trident SSI Multi-Layer Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 33o 36o 40o 44o 48o 52o 58o
stock #TSSI lie 59o 60o 60o 61o 62o 63o 64o 64o 64o 64o 64o
RH/LH: 3-PW, AW, SW and LW weight 246 253 260 267 274 281 288 295 295 300 300
offset 2.5 2.5 2.5 2.0 1.5 1.0 1.0 0.5 0.5 0.5 0.5
Requires our patented hosel collar insert system. bounce 5o 4o 8o 6o
can be bent up to 2o for loft or lie
Tech Info:
.370 hosel bore
blade length #5: 81mm
blade height #5: 54mm
431 stainless
hardness: 22
bottom of hosel to heel: 28mm
hosel depth: 34mm
topline width: 8mm
hosel OD: 14mm
modified square grooves
chrome finish
RH only

. very easy to hit irons throughout the set.

. multi layer technology.

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, AW, SW, LW

This head requires an insert.

insert ring insert ferrule
stock #hciri stock #insfi

Exclusive

The future is now with the Trident Multi-layer “SSI” iron. Made with multiple layers of material, this beautiful iron head
provides all the confidence building advantages of an extreme perimeter weighted style while maintaining the feel and
performance of a muscle back design. The center of gravity has been moved rearward providing more stability at impact
and added spin for green stopping power. Basically, the SSI irons give a more confident set up, effortless solid accurate
shots, and increased spin on the ball. Sounds like the iron we’re looking for!!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Dynamic Gold Lite TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Custom Lite Rifle
[ 10 ]
Dynalite Gold SL
 Trident Model 530 Titanium Specs for the 530cc driver
club #1 #1 #1 #1
stock #530TI Exclusive loft 8o 9o 10o 12o
RH: 8o, 9o, 10o and 12o lie 55o 55o 55o 55o
Requires our patented hosel collar insert system. weight 198 198 198 198
face ht 66 66 66 66
volume 530 530 530 530

Tech Info:
.350 hosel bore
heel/toe #1: 114mm
SP-700 Ti (C-cup face)
hardness: 42
hosel depth: 33mm
bottom of hosel to heel: 36mm
requires insert hcir3
1-2 degree closed face
RH only

. new thin face exceeds USGA max COR limit.

. unbreakable C-Cup face design.
. unbelievable distance.

.350 hosel bore

$3.00 headcover with the purchase of a
530cc head! - regular $9.00

Also available in Deep Red finish

stock# 530DR

Requires Our Patented Insert System

.350 Insert
stock #HCIR3

The 530cc is possibly the biggest and longest hitting Ti driver ever! Since the 530cc is now larger than the USGA allows for
tournament play, we decided to make the COR higher than the permitted .830. Using our C-cup design, we made a very thin,
layered variable face with a COR rating of .848! More rebound than any other driver now available!! Plus, our C-cup design
greatly increases consistency on off-center hits, both in performance and accuracy. And it’s unbreakable! Of course, distance
depends on more than high COR. You must get a proper launch angle, spin rate, etc. So, loft and shaft are important. But, for
non-tournament golfers who want to hit it out there with the Big Boys, the 530cc is the driver for you!!

Recommended Shafts (.350):

For a medium trajectory, use:
For a higher trajectory, use: For a lower trajectory, use:
Trident T4 R and S flexes
Trident T4 A and L flexes Penley Stealth 70
Trident 350 UL
UST XL A-flex Grafalloy ProLite 35
Penley Graphite Lite R and S
Penley ETA 55 R flex Aldila NV
UST V2 65
[ 11 ]
 Specs for the RD 450 Ti drivers Specs for the RD 400 Ti drivers
Trident Model RD Titanium club #1 #1 #1 #1 #1 club #1 #1 #1 #1
400cc stock #RDTI loft 8o 9o 10o 12o 15o loft 8o 9o 10o 15o
450cc stock #450RDTI lie 57o 57o 57o 57o 57o lie 56o 56o 56o 56o
RH only: 8o, 9o, 10o ,12o, and 15o weight 202 202 202 202 202 weight 198 198 198 198
face ht 57 57 57 57 57 face ht 54.5 54.5 54.5 54.5
volume 450 450 450 450 450 volume 400 400 400 400
Requires our patented hosel collar insert system.
Tech Info:
Ti model uses our unbreakable C-cup design. 1-2 degree closed face. hardness: 41
335 hosel bore hosel depth: 38mm
heel/toe #1: 98mm bottom of hosel to
SP-700 Ti (C-cup face) heel: 32mm
Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Trident Model RD Steel Woods

stock #RDW
RH only: 10o, #3, #5, #7 and #9

Specs for the RD steel woods

club #1 #3 #5 #7 #9
loft 10o 15o 19o 22o 25o
lie 55o 57o 58o 58o 58.5o
weight 200 208 218 222 228
face ht 42 41 40 39 38
volume 225 215 205 190 170

The Model RD Ti takes distance and forgiveness to a higher level! The 450cc RD is unique because the
design provides a truly deep face without an excessively oversized body-ideal for the modern golfer who wants
supersize driver benefits without the huge size. The rounded head shape and patented alignment arrow build
confidence in every swing. To ensure the Model RD is the best ti driver on the market, we use a milled,
variable C-cup face construction with the highest grade (SP-700) titanium available (pro line companies use a
lower grade!). The result: a soft, solid feel, unbreakable design and maximum COR-maximum distance! In
addition, our highly successful copper-tungsten back weight system promotes stability and energy transfer
down the target line. The Model RD Fairway woods also utilize our reduced drag sole design for unparalleled
ease in hitting the ball from a tight lie or rough!
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight Trident UL 3.5 AccuFlex Icon
Trident Superlite L or A flex Trident Superlite R or S flex Trident Ultralite 2.8
Penley Graphite Lite UST V2 65 Penley Stealth 70
[ 12 ] ProLaunch 45/55 Grafalloy Comp NT Grafalloy ProLite 35
Trident Model RD Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 33o 36o 40o 44o 49o 54o 58o
stock #RDI lie 59o 60o 61o 62o 62.5o 63.5o 64o 64.5o 64.5o 64.5o 64.5o
RH only: 3-PW, SW, AW and LW weight 244 251 258 265 272 279 286 293 300 305 305
Requires our patented hosel collar insert system. offset 3.5 3.5 3.0 2.5 2.0 1.5 1.0 1.0 0.5 0.5 0.5
can be bent up to 2o for loft or lie bounce 6o 5o 8o 6o
Sold in sets: 3-PW, 5-PW, 6-PW Tech Info:
individual pieces: #5, #7, PW, AW, SW, LW .370 hosel bore
blade length #5: 81mm
Exclusive blade height #5: 54mm
431 stainless
hardness: 22
bottom of hosel to heel: 28mm
hosel depth: 32mm
topline width: 7.5mm
hosel OD: 14mm
modified square grooves
mirror chrome finish
right hand only

The wider
sole optimizes
trajectory and
provides added
stability
(25mm).

. better than pro line-guaranteed!

. low center of gravity creates optimum trajectory. This head requires an insert.
. high moment of inertia for forgiveness and distance. insert ring insert ferrule
. progressive offsets. stock #hciri stock #insfi

. undercut cavity
The RD design incorporates many new game improvement features. A wider, deeper, undercut cavity moves
weight back away from the face. A variable thickness face moves mass lower in the long irons and higher in the
short irons for optimum trajectory. Å slightly oversize head with medium thin topline builds confidence. An
extra wide sole reduces fat shots while helping get shots airborne much easier. A small but progressive offsets
help alignment and to square the face at impact. The resulting RD design is truly an ultimate distance iron but
with an unusual shot pattern. The shot pattern is unusual because the RD irons not only have a high trajectory
but it is a pro-like boring trajectory. Needless to say, a high boring shot promotes a dramatic increase in distance.
That’s why we know the Model RD is longer and easier to hit than any pro line club on the market.
Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 Dynalite Gold SL Rifle
Grafalloy Prolaunch Custom Lite TT Black Gold
[ 13 ]
 Trident SS 410 Titanium Specs for the SS 410 Ti drivers
stock #TI410 club #1 #1 #1 #1
loft 8o 9o 10o 12o
410cc RH only: 8o, 9o, 10o ,12o lie 56o 56o 56o 56o
Requires our patented hosel collar insert system. weight 198 198 198 198
face ht 56 56 56 56
volume 410 410 410 410

Tech Info
.335 hosel bore
heel/toe #1: 105mm
SP-700 Ti (C-cup face)
hardness: 41
hosel depth: 38mm
bottom of hosel to heel: 32mm

requires insert hcir2 or insfw

2 degree closed face
RH only

Requires an insert
Patent Pending Design
insert ring insert ferrule
stock #HCIR2 stock #INSFW

Exclusive

The Trident SS Ti 410cc is the next advancement in our line of superior Ti drivers. A new, tm
revolutionary,
ultralight Ti crown (lighter and stronger than composite crowns such as the ERC Fusion ) has enabled us to
design our best selling SS Ti in a larger 410cc version. The ultralite crown feature allows us to move more
weight to areas of the club that enhance performance. Our patent pending screw weight system decreases both
sidespin and backspin-giving longer carry and accuracy. In addition, the weights can be adjusted for lighter or
heavier head weight to compensate for shaft lengthtm
and weight or to add/decrease draw bias. Our larger
maximum COR face and our unbreakable C-cup design promote maximum rebound of the ball.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 Trident Power Hinge AccuFlex Icon
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Penley Stealth 70
ProLaunch 45/55 AccuFlex Evolution Grafalloy ProLite 35
UST V2 65
[ 14 ]
Grafalloy Comp NT
Trident SS Steel Plus club #1 #1 #1 #3 #5 #7 #9 #11
loft 9o 10o 12o 15o 19o 22o 25o 28o
stock #TSSW lie 55o 55o 56o 57o 57.5o 58o 58o 59o
RH: 9o, 10o, 12o, #3, #5, #7, #9 and #11 weight 200 200 204 210 218 222 226 232
LH: 9o, 10o,#3, #5, #7, #9 face ht 42 42 41 37 35 34 34 33
Requires our patented hosel collar insert system. volume 230 230 230 200 195 180 165 150

Tech Info:
.335 hosel bore
heel/toe #1: 82mm
450ss steel
hardness: 41
hosel depth: 31mm
bottom of hosel to heel: 26mm
requires insert hcir2 or insfw
square face angles
RH/LH

. medium trajectory.
. back weight adds forgiveness. Exclusive
. fairway woods match SS Ti models.

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

The Trident SS Woods are made with a new ss alloy that is not only significantly harder than 17-4, but also more
elastic in nature. Using this material, we were able to design a face structure that has a maximum 3.2mm thickness at
the center of the face then becoming progressively thinner (2.6mm) around the perimeter. This creates enhanced energy
transfer to the ball through increased face deflection (ie. the rebound effect), creating optimal distance and trajectory in
each driver and fairway wood. This design advancement is key to improving game performance for golfers of all skill
levels. In addition, the Steel Plus heads are made with square face angles and a tungsten rear sole weight for an ease of
playability that all golfers appreciate! Many customers have told us that this is the longest hitting steel head that they
have ever used!!
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight Trident Power Hinge AccuFlex Icon
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex UST Proforce 75
ProLaunch 45/55 AccuFlex Evolution Grafalloy ProLite 35
[ 15 ]
 Elite Plus Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 22o 25o 27o 30o 33o 36o 40o 44o 49o 54o 58o
stock #ELPI lie 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o 64o
RH only: 3-PW, SW, AW and LW weight 244 251 258 265 272 279 286 293 300 300 300
Requires our patented hosel collar insert system. offset 3.5 3.5 3.0 2.5 2.0 1.5 1.0 1.0 1.0 1.0 1.0
Can be bent up to 2o for loft or lie. bounce 5o 6o 8o 6o
Tech Info:
.370 hosel bore
blade length #5: 83mm
blade height #5: 56mm
431 stainless
Exclusive hardness: 22
bottom of hosel to heel: 25mm
hosel depth: 30mm
topline width: 9mm
hosel OD: 13mm
modified square grooves
bright satin finish
right hand only

The deep undercut cavity

increases stability.

. low center of gravity creates optimum trajectory.

. easy to hit long irons, accurate short irons.
. progressive offsets.
. extreme rearward weight design increases performance.
Sold in sets: 3-PW or 5-PW
individual pieces: #5, #7,PW, AW, SW, LW
This head requires an insert. Wide 28mm sole
insert ring insert ferrule promotes hybrid type
stock #hciri stock #insfi performance.

Although similar to other pro line designs on the market, the Elite Plus irons are better than any other competitor’s
product because we engineered it to be better. While cosmetics are all most companies care about, our primary goal
is PERFORMANCE! And these irons have many specific performance features such as: a variable face, an extra
wide contoured (tour grind) sole, small progressive offsets that allow better target alignment, plus the undercut cavity
is designed to move more weight back away from the clubface to promote better trajectory, feel and performance.
Superior engineering guarantees the Elite Plus will have superior performance. Cosmetics are important, but
performance and results are the goal.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 Dynalite Gold SL TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle
[ 16 ]
Trident Injector II Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 22o 25o 28o 31o 34o 37o 41o 45o 50o 54o 60o
stock #INJ2I lie 59o 60o 61o 62o 63o 64o 64o 64o 65o 65o 65o
RH/LH: 3-PW, SW, AW and LW weight 244 251 258 265 272 279 286 293 300 300 300
Requires our patented hosel collar insert system. offset 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 2.0 2.0 2.0
Can be bent up to 2o for loft or lie. bounce 4o 6o 8o 4o

Tech Info:
. RH/LH available. .370 hosel bore
blade length #5: 85mm
blade height #5: 57mm
431 stainless
hardness: 22
bottom of hosel to heel: 20mm
hosel depth: 32mm
topline width: 5mm
hosel OD: 13mm
modified square grooves
chrome finish
right hand only

.More offset for easy playability

Sold in sets: 3-PW (rh and lh)

5-PW (rh only)
individual pieces: #5, #7, PW, AW, SW, LW

This head requires an insert.

insert ring insert ferrule
stock #hciri stock #insfi

The Injector II irons are the result of an intense effort to design and engineer an innovative and attractive game
improvement golf club. And no question, we have succeeded in doing that with the Injector II. The Injector II irons are
loaded with game improvement features for the high and low handicap player alike. Among these features are: progres-
sive offsets and specific club lofts which together insure increased accuracy and performance. The deep undercut cavity
is designed to locate more mass behind the ball and lower the CG for easy to hit long irons. The contoured wider sole
gives less turf “dig” and more solid contact shot after shot. The rounded non-glare topline lets the player focus on align-
ment. Without a doubt, you will be amazed when you see and play these terrific irons!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle

[ 17 ]
 Heathway Titanium 400cc/450cc Specs for the HWTI Specs for the H450TI
club #1 #1 #1 #1 club #1 #1 #1 #1
stock #HWTI/H450TI loft 8o 9o 10o 12o loft 8o 9o 10o 12o
RH only: 8o, 9o, 10o and 12o lie 56o 56o 56o 56o lie 56o 56o 56o 56o
Requires our patented hosel collar insert system. weight 198 198 198 198 weight 200 200 200 200
face ht 53 53 53 53 face ht 56 56 56 56
volume 400 400 400 400 volume 450 450 450 450
Exclusive Tech Info
Ti drivers:
.335 hosel bore
heel/toe #1: 98/101mm
SP-700 TI(drivers only) Specs for the steel woods
club #3 #5 #7
hardness: 41 loft 15o 19o 23o
hosel depth: 38mm lie 56o 57o 58o
bottom of hosel to heel: 32mm weight 212 218 222
requires insert hcir2 or insfw face ht 44 42 40
1-2 degree closed face (#1 only) volume 215 200 190
RH only

Heathway Steel Fairway Woods

stock #HFW
RH only:#3, #5 and #7

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW
Pro Swing is proud to offer the Heathway ti driver and steel fairway woods. The ti driver is modeled after the latest
pro-line brand-but with several added improvements that make this driver better performing at a fraction of their
cost!! Check out these differences: 1) Heathway’s exclusive plasma induced brass back weight actually will help you
achieve a solid, accurate drive. 2) The Heathway Ti uses the patented Trident insert system to prevent shaft breakage.
3) The hosel progression has been changed so that the Heathway Ti face can be squared up and still allow for a slight
draw effect. 4) The size of the head has been increased for maximum forgiveness and performance. 5) A special ti
alloy (SP-700) has been used to achieve a very thin 2.2mm face for maximum COR.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 ProLaunch 65 Grafalloy Blue
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex AccuFlex Icon
ProLaunch 45/55 Fugi-L Grafalloy ProLite 35
UST V2 65 UST ProForce
[ 18 ] Grafalloy Comp NT Fuji-LD
Heathway Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 34o 37o 41o 45o 49o 53o 58o
stock #HWI lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o
RH: 3-PW, SW, AW and LW weight 242 249 256 263 270 277 284 292 294 296 296
LH: 3-PW and SW offset 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.5
bounce 6o 4o 9o 7o
Requires our patented hosel collar insert system.
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 86mm
Exclusive blade height #5: 54mm
431 stainless
hardness: 21
bottom of hosel to heel: 27mm
hosel depth: 36mm
topline width: 8mm
hosel OD: 14mm
modified square grooves
chrome finish
RH/LH available

Sold in sets: 3-PW (rh and lh)

5-PW (rh only)
individual pieces: #5, #7, PW,
AW, SW, LW

deep inset cavity

. low center of gravity This head requires an

. high moment of inertia promotes forgiveness and distance. insert ring insert.
. perfect match with our other Heathway woods. stock #hciri
insert ferrule
stock #insfi

The awesome Heathway Professional Irons are the next generation of easy to hit, high performance irons. A notched
sole area moves more weight toward the toe and heel to increase forgiveness. An undercut cavity helps to move the
weight away from the face to increase the moment of inertia and reduce twisting. The variable face increases perform-
ance even more! And for a finishing touch, the cavity badge matches the Heathway Ti driver finish for a really terrific
looking set! Why pay more and get less for a pro-line brand that uses “off the shelf ” shafts and grips?

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
TT Release Custom Lite Rifle
Dynalite Gold SL [ 19 ]
 KB XD Titanium 460cc Specs for the KB XD Ti drivers
stock #XDTI club #1 #1 #1 #1
RH only: 9o, 10o ,12o loft 8o 9o 10o 12o
lie 57o 57o 57o 57o
Requires our patented hosel collar insert system.
weight 200 200 200 200
face ht 55 55 55 55
volume 460 460 460 460

Tech Info
.335 hosel bore
heel/toe Ti #1: 92mm
SP-700 Ti (C-cup face)
hardness: 44
hosel depth: 36mm
bottom of hosel to heel: 35mm
requires insert
2 degree closed face
RH only
. very long, very forgiving!
. thin C-cup face provides added spring.

Exclusive

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

The KB Ti combines a great classic look with a design that emphasizes playability. Game improvement features such
as concentrated weight at optimal locations, unbreakable C-cup construction with a milled variable thin, hot face
make the KB XD a great performer without the “frills” found on other ti drivers. In addition, the new KB XD ti
features an extremely pleasing profile and a powerful sound and feel at impact. The KB XD is a perfect compliment
to the new Hybrid KB XD irons.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight UST V2 65 AccuFlex Icon
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Penley Stealth 70
ProLaunch 45/55 Fuji-L Grafalloy ProLite 35
[ 20 ] Grafalloy Comp NT Fuji-LD
KB XD Irons club #3 #4 #5 #6 #7 #8 #9 PW SW LW
loft 22o 25o 28o 31o 34o 37o 42o 46o 53o 60o
stock #KBXDI lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o
RH: 3-PW, SW, and LW weight 248 255 262 269 276 283 290 296 298 298
offset 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.5 1.5 1.5
Must be countersunk for use with graphite shafts. bounce 6o 9o 4o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 80mm
blade height #5: 50mm
431 stainless
hardness: 22
bottom of hosel to heel: 29mm
hosel depth: 35mm
topline width: 8mm
hosel OD: 15mm
modified square grooves
satin finish
RH only

This head requires a ferrule.

we recommend:
5/8” Black
stock #FMBI

Sold only in sets: 3-PW

individual pieces: #5, #7, PW, SW, and LW
Deep cavity creates the
Exclusive look, feel and perform-
ance of a hybrid.

The KB XD irons are the most forgiving KB model irons ever and are a true pleasure to play. Made to look and
feel like a blade, but in a Hybrid style design gives an absolute optimum balance of forgiveness and playability!
The progressive sole width makes long irons perform with the easy playability of a Hybrid while the mid-to-short
irons produce extra feel and distance similar to a forged blade. This unique ability of the KB XD irons promotes a
more stable and consistent shot pattern throughout the set. No doubt these KB irons are among the very best
available and will improve the games of all handicap levels. Guaranteed better performance than any similar style
head on the market.
Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 Aldila TC Pro TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle
TT Release TT Lite
Dynalite Gold SL [ 21 ]
 KB Tour Blade Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 22o 25o 28o 31o 34o 37o 40o 45o 49o 53o 58o
stock #KTRI lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o
RH: 3-PW, SW, AW and LW weight 246 253 260 267 274 281 288 295 295 298 300
offset 2.5 2.5 2.5 2.0 1.5 1.0 0.5 0.5 0.5 0.5 0.5
Must be countersunk for use with graphite shafts. bounce 5o 4o 8o 6o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 80mm
blade height #5: 53mm
431 stainless
hardness: 21
bottom of hosel to heel: 29mm
hosel depth: 35mm
topline width: 6mm
hosel OD: 15mm
modified square grooves
polished satin finish
RH only

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, PW,
AW, SW, LW

This head requires a ferrule.

we recommend:
5/8” Black
stock #FMBI

. very easy to hit long irons!

. soft solid feel.
. minimal progressive offsets.
. durable polished satin finish.
. best performing blade style ever made! Exclusive

. Guaranteed a club longer hitting than

any forged blade

The most common complaints about a “blade” iron are that it is: hard to hit, has lots of vibration and terrible feel.
The KB Tour Blade eliminates these problems! Across the back of the head, we’ve placed a precise area of
polymeric isomer that totally eliminates vibration! The center of gravity has been moved closer to the sole and
toward the face, making the long irons easier to hit with a higher trajectory than most cavity designs! The thin top
line and square, straight blade make target alignment simple and accurate! Note: the KB Blade is a slightly oversize
design for extra forgiveness. Guaranteed to be the best!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle
Dynalite Gold SL
[ 22 ]
M-40 Forged Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 34o 37o 41o 45o 48o 53o 60o
stock #M40I lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o 65o
RH: 3-PW, SW, AW and LW weight 243 250 257 264 271 279 287 295 295 296 300
offset 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.5 0.5 0.5
Must be countersunk for use with graphite shafts. bounce 5o 6o 9o 7o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 83mm
blade height #5: 53mm
carbon steel
hardness: 16
bottom of hosel to heel: 28mm
hosel depth: 36mm
topline width: 5mm
hosel OD: 14mm
modified square grooves
polished chrome finish
RH only

Sold in sets: 3-PW

individual pieces: #5, #7, AW, SW, LW

Forged Face Irons !

. carbon steel forging for soft feel.

. low center of gravity.
. durable polished chrome finish.

This head requires a ferrule.

we recommend:
9/16” Silver/Black
stock #FBSGI

Exclusive

The M-40 irons are a classic. This head design features a unique half cavity which not only gives great playability, but
also a forged muscle back feel. Made by a unique investment forged process that offers both the precision of casting and
the feel of forging, that is a soft solid feel. The M-40 offers a clean look at address with a compact blade, a traditional
thin top line, cambered sole and minimal offsets. The M-40 irons are the result of a meticulous design effort by
tournament golfers and our technical staff. The extreme playability for different levels of golfers, plus a very, very solid
feel helped by the softer 1030 carbon steel construction, without question make the M-40 far superior to others. We say
this without apology: the M-40 irons are the best hitting and feeling component irons of this type on the market. Take
it to the bank!
Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold Trident Vibracore TT Dynamic Gold
TX-90 UST Proforce Rv95 TT Black Gold
UST irod long iron Custom Lite Rifle
Dynalite Gold SL [ 23 ]
 SQS Titanium Specs for the SQS Ti drivers
stock #SQSTI club #1 #1 #1 #1
loft 9o 10o 12o 15o
RH only: 9o, 10o, 12o, 15o lie 57o 57o 57o 57o
Requires our patented hosel collar insert system. weight 202 202 202 202
face ht 53 53 53 53
volume 460 460 460 460

Tech Info
.335 hosel bore
heel/toe #1: 110mm
SP-700 Ti (C-cup face)
hardness: 41
hosel depth: 35mm
bottom of hosel to heel: 37mm

requires insert hcir2 or insfw

2 degree closed face
RH only

Extra wide body and

extra long hitting!

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Exclusive

The new SQS Ti is extra long and forgiving. Made with our patented C-cuptm VFT face of SP-700 titanium.
SP700 is the strongest , most flexible titanium material, is military grade and definitely makes the hottest thin
face, only 2.1mm thick. And with a deeper center of gravity moved back away from the face, the SQS Ti
delivers a golf club with immense power and forgiveness without the need for sole weights. With the new V2
shaft by UST, one has a beautifully matched club as well as a long hitting accurate driver.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST XL Trident UL 3.5 AccuFlex Icon
Trident Superlite L or A flex Trident Superlite R or S flex Trident Ultralite 2.8
Penley Graphite Lite UST Proforce V2 65 Trident Fuji-LD
ProLaunch 45/55 Grafalloy Comp NT Penley Stealth 70
UST XL Grafalloy ProLite 35
ProLaunch 65 UST ProForce
[ 24 ]
X-Factor Hot Shot Titanium 460cc Specs for the Hotshot Ti
club #1 #1 #1
stock #HSTI loft 9o 10o 12o
RH only: 9o, 10o and 12o lie 56o 56o 56o
Requires our patented hosel collar insert system. weight 198 198 198
face ht 53 53 53
volume 460 460 460

Tech Info:
.335 hosel bore
heel/toe #1: 98mm
SP-700 Ti (C-cup face)
hardness: 41
hosel depth: 38mm
bottom of hosel to heel: 32mm
requires insert hcir2 or insfw
1 degree closed face
RH only

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Exclusive

The goal in developing a hot Ti driver was to create an ultimate performance Ti head with increased dimensional
stability and playability. The Hot Shot Ti is the result. Made with our unbreakable C-cup design and ultra thin variable
face, the Hot Shot Ti pushed the new USGA “CT” (Characteristic Time) spring face test to the limit. Using new CAD
design techniques to place head mass optimally as well as design bulge and roll to optimize spin rate and launch angle.
This model has an extremely pleasing profile and a solid, powerful sound at impact. The 460cc Hot Shot Ti is one of our
longest hitting drivers.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 Trident UL 3.5 Trident Fuji LD
Trident Superlite L or A flex Trident Superlite R or S flex Trident Ultralite 2.8
Penley Graphite Lite Accuflex Evolution Penley Stealth 70
ProLaunch 45/55 UST V2 65 Grafalloy ProLite 35
Grafalloy Comp NT Fuji-LD [ 25 ]
 Hot Shot Irons club #3 #4 #5 #6 #7 #8 #9 PW SW LW
loft 22o 25o 28o 31o 34o 37o 40o 44o 53o 58o
stock #HOTI lie 59o 60o 60o 61o 62o 63o 64o 64o 65o 65o
RH: 3-PW, SW and LW weight 242 249 256 263 270 277 284 291 298 300
offset 3.5 3.5 3.0 2.5 2.0 1.5 1.0 1.0 1.0 1.0
Must be countersunk for use with graphite shafts. bounce 6o 10o 6o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 82mm
blade height #5: 52mm
431 stainless
hardness: 22
bottom of hosel to heel: 29mm
hosel depth: 35mm
topline width: 9mm
hosel OD: 15mm
modified square grooves
chrome finish
RH only

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, PW, SW, LW
. wide 23mm radiused sole prevents turf drag.
. minimal progressive offsets.
. soft solid feel.
. very long hitting!

This head requires a ferrule.

we recommend:
9/16” Blk/Gray/Silver
stock #FBSGI

Exclusive

The hollow Hot Shot irons represent a revolution in design. The center of gravity has been moved away from the
face and lowered in the long irons for higher, easier to hit shots. The rear power bar design also enhances perime-
ter weighting and increases resistance to twisting. Plus, the power bar design allows mass to be positioned
throughout the set for a higher trajectory in the long irons, medium trajectory in the mid-irons and more boring
shots for the short irons-with increased backspin. Wide sole widths throughout the set prevent fat shots and turf
drag.
Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle
[ 26 ]
X-Factor Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 34o 37o 41o 45o 49o 53o 58o
stock #XFI lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o
RH only: 3-PW, SW, AW and LW weight 242 249 256 263 270 277 284 290 294 294 294
offset 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.5 0.5 0.5
Must be countersunk for use with graphite shafts.
bounce 6o 7o 9o 7o
Can be bent up to 2o for loft or lie.
Tech Info
.370 hosel bore
blade length #5: 80mm
blade height #5: 54mm
431 stainless
Exclusive hardness: 22
bottom of hosel to heel: 28mm
hosel depth: 36mm
topline width: 5mm
hosel OD: 14mm
modified square grooves
chrome finish
RH only

#3/4/5 have a full cavity as shown.

Sold in sets: 3-PW
individual pieces: #5, #7, SW, AW, LW #6/7/8 have a muscle
cavity as shown.

#9/wedges are a blade

design as shown.

This head requires a ferrule.

we recommend:
9/16” Silver/Black
stock #FBSGI

Utilizing a shot-by-shot approach to club making, we have developed the X-Factor combo irons. These irons use
multiple cavity weight design for one ideal set. The long irons (#3/4/5) feature a deep cavity back for more forgiveness
and a lower center of gravity promoting an increase in trajectory. The middle irons (#6/7/8) feature a progressive
muscle-back cavity for versatile shot making and increased ball spin. Lastly, the short irons (#9/wedges) rely on a blade
design that will work the ball closer to the pin and give maximum ball spin. The X-Factor irons also utilize our exclusive
“same size design” with the #3 iron the same size as the PW. This is very important with a combo set like the X-Factor
irons!! Same size design will make all the irons set up the same as one set, while taking advantage of the combo design.

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT LIte TT Black Gold
Grafalloy ProLaunch Custom Lite Rifle [ 27 ]
 New Crown Regal 460cc Offset Titanium Specs for 46COTI
stock #46COTI club #1 #1 #1 #1
loft 8o 9o 10o 12o
RH only: 8o, 9o, 10o, 12o lie 55o 55o 55o 55o
Requires our patented hosel collar insert system. weight 200 200 200 200
face ht 55 55 55 55
volume 460 460 460 460

Tech Info
.335 hosel bore
heel/toe: 105mm
SP-700 Ti (C-cup face)
hardness: 45
hosel depth: 38mm
bottom of hosel to heel: 32mm

requires insert hcir2 or insfw

2 degree closed face
RH only

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Exclusive

Pro Swing is proud to offer the latest in a long line of successful Crown Regal products, the new Regal 460 Offset
Ti. This model incorporates the same design initiative as the straight hosel version. Our new design moves the
shaft closer to the hitting area which dramatically improves stability, especially on off-center hits. The 460cc head
size, when coupled with the offset hosel, ensures that the Regal 460cc Offset Ti will eliminate slicing.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST Harmon CB60 Trident UL 3.5 AccuFlex Icon
Trident Superlite L or A flex Trident Superlite R or S flex Trident Ultralite 2.8
Penley Graphite Lite Accuflex Evolution Penley Stealth 70
ProLaunch 45/55 Grafalloy Comp NT Grafalloy ProLite 35
UST V2
ProLaunch 65
[ 28 ]
New Crown Regal 460cc Straight face Titanium Specs for 46RSTI
stock #46RSTI club #1 #1 #1 #1
loft 8o 9o 10o 12o
RH only:8o, 9o, 10o, 12o lie 55o 55o 55o 55o
Requires our patented hosel collar insert system. weight 200 200 200 200
face ht 55 55 55 55
volume 460 460 460 460

Tech Info
.335 hosel bore
heel/toe #1: 105mm
SP-700 Ti (C-cup face)
hardness: 45
hosel depth: 38mm
bottom of hosel to heel: 32mm

requires insert hcir2 or insfw

2 degree closed face
RH only

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Exclusive

Pro Swing is proud to offer the latest in a long line of successful Crown Regal products, the new Regal 460 Ti.
This model incorporates a sole design that is engineered to provide the ultimate in stability especially on off-center
hits. The raised center region of the sole adds mass both behind and away from the face. This enables the center of
gravity to be optimized to provide a higher launch angle with less spin. The combination of high launch/less spin
has been shown in robotic and tour testing to maximize overall performance. We’ve also added our thin C-cup face
for maximum COR (CT) to increase distance. Hit it long, hit it straight with the Regal 460cc Ti.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST Harmon CB60 Trident UL 3.5 Aldila NV
Trident Superlite L or A flex Trident Superlite R or S flex Trident Ultralite 2.8
Penley Graphite Lite Accuflex Evolution Trident Fuji-LD
ProLaunch 45/55 UST V2 65 Grafalloy ProLite 35
Fugi-L
ProLaunch 65 [ 29 ]
 Crown Regal 450 Hyper Steel Offset /Straight Woods Specs for CRW/CR450W
offset stock #CRW club #1 #1 #1 #3 #5 #7 #9*
loft 9o 10o 12o 15o 18o 21o 25o
RH only: 9o, 10o, 12o, #3, #5, #7 lie 55o 55o 55o 56o 57o 58o 59o
straight hosel stock #CR450W weight 200 200 202 208 214 222 228
RH only: 9o, 10o, 12o, #3, #5, #7 and #9* face ht 44 44 44 40 38 36 35
* #9 wood straight hosel only volume 250 250 250 185 170 155 150
Must be countersunk for use with graphite shafts. Tech Info:
.335 hosel bore
heel/toe #1: 90mm
450ss steel
hardness: 41
hosel depth: 32mm
bottom of hosel to heel: 29mm
requires a ferrule
Offset: 1o closed/3mm offset
Straight Hosel: square face angles
RH only

Both models require a ferrule.

we recommend:
3/8” Black/Gold
stock #FMBGWS

CR450 Straight Hosel Steel

Exclusive

Pro Swing is proud to offer the Crown Regal Steel Offset Woods. This metal wood was designed to give maxi-
mum distance, but at the same time, fight slicing. This is achieved by incorporating an offset hosel (to keep
hands ahead at impact) with a slightly closed face angle. The player with a slice will benefit greatly from this
design. The offset hosel helps to yield longer, straighter shots by increasing the likelihood of a soft draw. To add
distance, we’ve used a high tensile strength alloy to make a variable thickness face design for maximum ball
rebound. In addition to performance, the Regal Steel Offset is an incredibly attractive head. The sole plate, for
example, has a beautiful satin, pewter and chrome finish. Also available in a straight hosel version.
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight Trident Power Hinge UST Proforce 75
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Penley Stealth 70
ProLaunch 45/55 Accuflex Evolution Grafalloy ProLite 35
[ 30 ]
Crown Regal IV Brass Back club #1 #1 #1 #1 #3 #5 #7
stock #CRBB loft 8o 9o 10o 12o 14o 18o 21o
RH only: 8o, 9o, 10o, 12o , #3, #5 and #7 lie 54o 54o 54o 54o 55o 56o 57o
weight 200 200 200 200 210 218 224
Must be countersunk for use with graphite shafts. face ht 42 42 42 42 36 33 31
volume 220 220 220 220 210 200 190

Tech Info:
.335 hosel bore
heel/toe #1: 95mm
niobium steel
hardness: 42
hosel depth: 33mm
bottom of hosel to heel: 26mm
requires a ferrule
square face angles
RH only
. longest hitting steel wood ever made!

This head requires a ferrule.

we recommend:
3/8” Black/Gold
stock #FMBGWS

Exclusive

The Crown Regal IV Brass Back Weight Woods move the center of gravity back away from the face to give the head
better balance, a solid feel, and promote distance. But combined with our Niobium Steel head with a hardness rating of
HRC 42 (normal 17-4 stainless steel is normally about HRC 30) the ball will rebound at a greater velocity with less
spin, better accuracy, and more distance. The design of the Crown Regal IV Brass Back is very unique with the incor-
poration of “mini offsets”. Mini offset hosels have just enough offset to square the head at impact by a fade player, but
small enough to prevent hooking by a draw player. Mini offsets promote a more solid contact with greater accuracy.

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Trident Lite Weight Trident Power Hinge Trident Black Snake
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Penley Stealth 70
ProLaunch 45/55 Accuflex Evolution Grafalloy ProLite 35

[ 31 ]
 Crown Regal 5 Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
loft 21o 24o 27o 30o 33o 36o 40o 44o 48o 53o 58o
stock #CR5I lie 59o 60o 61o 62o 63o 63o 64o 64o 64o 64o 64o
RH only: 3-PW, AW, SW and LW weight 244 251 258 265 272 279 286 293 295 300 300
offset 4.0 3.5 3.0 2.5 2.0 1.5 1.0 1.0 1.0 1.0 1.0
Must be countersunk for use with graphite shafts.
bounce 6o 5o 8o 6o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 81mm
blade height #5: 53mm
Exclusive 431 stainless
hardness: 22
bottom of hosel to heel: 28mm
hosel depth: 36mm
topline width: 8mm
hosel OD: 14mm
modified square grooves
satin finish
RH only

Sold in sets: 3-PW

individual pieces: #5, #7, AW, SW, LW

Cavity weight system

promotes a deeper
center of gravity.

. classic silhouette builds confidence. This head requires a ferrule.

. mass in the “muscle” part of cavity adds power and feel. we recommend:
5/8” Black
stock #FMBI

Muscle Cavity Irons

The new CR5 irons are designed to help all golfers enjoy the game more and are loaded with game improvement features
such as the undercut cavity design that moves more weight to the perimeter for forgiving consistency. This also lowers the
center of gravity making it easier to get the ball up in the air. Additional mass has been concentrated in the “muscle”
portions of the cavity, right behind the ball at impact to give the club an extremely powerful and solid feel. To enhance
game improvement, the CR5 irons feature progressive offsets, longer and higher face size for increased moment of inertia
and thin topline for easy alignment.

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Custom Lite Rifle
[ 32 ]
Crown Regal II Irons club #1 #2 #3 #4 #5 #6 #7 #8 #9 PW SW LW
loft 16o 18o 20o 23o 27o 30o 34o 37o 41o 45o 53o 58o
stock #CR2I lie 57o 57o 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o
RH/LH: 1-PW, SW and LW weight 230 237 244 251 258 265 272 280 287 294 300 300
offset 5.0 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 1.0 1.0
Must be countersunk for use with graphite shafts. bounce 4o 6o 5o
Can be bent up to 2o for loft or lie.

Tech Info:
.370 hosel bore
blade length #5: 83mm
blade height #5: 57mm
431 stainless
hardness: 22
bottom of hosel to heel: 28mm
hosel depth: 35mm
topline width: 7mm
hosel OD: 13.5mm
modified square grooves
chrome finish
RH/LH

Sold in sets: 3-PW (rh and lh)

5-PW (rh only)
individual pieces: #1, #2, #5, #7,
PW, SW, LW

This head requires a ferrule.

we recommend:
5/8” Black/Gold
stock #FMBGI

Exclusive

The Crown Regal II irons have a cavity weighting system that is not only very appealing to look at, but centers weight
directly behind the ball at impact. Thus, imparting greater energy and more distance to each shot. With slightly stronger
lofts, there is no doubt these irons will add length to your game. We have also enhanced the consistency by designing
progressive offsets into the irons. Other features include an updated ball alignment aid on the face, beautiful frosted cavi-
ty, and a bold, square topline. The Crown Regal II sets up square, plays great and looks terrific!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Custom Lite Rifle

[ 33 ]
 DDI E Model Titanium DDI K Model Titanium
stock #DETI stock #DKTI
RH only: 8o, 9o, 10o and 12o RH: 8o, 9o, 10o, and 15o
The DDi K Ti driver has a slightly more squared toe at
address, and slightly more rounded sole plate. The K Model is
designed to produce a low spin/high trajectory shot pattern.

The DDi E Ti driver has a slightly less rounded toe, and

slightly less rounded sole plate. The E Model is designed Specs for the DDI K Ti drivers
to produce a more boring trajectory. club #1 #1 #1 #1
loft 8o 9o 10o 15o
Specs for the DDI E Ti drivers lie 55o 55o 55o 55o
club #1 #1 #1 #1 weight 200 200 200 200
Tech Info
loft 8o 9o 10o 12o face ht 55 55 55 55
lie 55o 55o 55o 55o .335 hosel bore volume 385 385 385 385
weight 200 200 200 200 heel/toe #1: 100mm
face ht 54 54 54 54 Beta SF-Ti
volume 385 385 385 385 hardness: 41
hosel depth: 37mm
bottom of hosel to heel: 38mm
Limited inventory on both requires insert hcir2 or insfw
Both require
- No back orders. 1 degree closed face an insert
RH only insert ring insert ferrule
stock #HCIR2 stock #INSFW

Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 Trident Power Hinge Trident Black Snake
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite UST V2 65 Penley Stealth 70
ProLaunch 45/55 Accuflex Evolution Grafalloy ProLite 35
[ 34 ]
 Trident Widebody IV club #1 #1 #3 #5 #7 #9 #11
loft 10o 12o 15o 19o 23o 28o 32o
stock #WB4 lie 54o 54o 55o 56o 56o 57o 58o
RH: 10o, 12o, #3, #5, #7, #9, #11 weight 202 202 208 216 224 230 235
LH: 10o, #3, #5, #7, #9, #11 face ht 42 42 40 37 35 34 34
Requires our patented hosel volume 200 200 190 180 170 160 150
collar insert system.

. smaller head ideal for ladies. The Widebody IV is a unique design cast
with a super strong solid face onto a lower
body of differing metal thickness and an
extended convex sole. This allows a greater
.335” hosel bore. amount of weight in the bottom portion of
heel to toe driver: 84mm. the clubhead and a lower center of gravity.
Material: 17-4 steel. These features combined with a larger
Hardness rating: 29. effective hitting area create a very forgiving
Bottom of hosel to heel: 27mm metal wood that will get the ball airborne
Hosel depth: 35mm. with less effort and a better feel. The
Square face angles. Tomahawk Sole is convex and slides across
the turf easier.

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Original Excell Thin Lie Specs for the Thin Lie

stock #EXTW club #1 #1 #1 #3 #5 #7 #9
loft 9.5o 10.5o 13o 16o 19o 23o 28o
RH only: 9.5o, 10.5o, 13o, #3, #5, #7 and #9 lie 54o 54o 54o 55o 56o 56o 57o
Must be countersunk for use with graphite shafts. weight 200 200 206 213 219 222 230
face ht 40 40 39 39 36 35 33
Tech Info: volume 200 200 200 195 190 180 175
.335 hosel bore
heel/toe #1: 90mm Requires a ferrule.
17-4 steel We recommend 3/8” black
hardness: 36 stock #fmbs
hosel depth: 36mm
bottom of hosel to heel: 25mm The original Thin Lie is a mid face metal wood designed to
requires a ferrule optimize your ability to control shots from both a tight lie or
square face angles rough situation and off the tee! This unique design gives the
RH only Excell Thin Lie club a wider bottom and lowers the center of
gravity below conventional woods. With a mid face and low CG,
this design produces optimal trajectory, higher velocity shots and
less sidespin than other clubs-from any type of lie. In fact, this
club is much easier to hit from the rough, a divot, or a fairway
bunker. Improve the critical 1st and 2nd shot scoring area of
your game with the Excell metal wood.

Recommended Shafts for EXTW and WB4:

For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Dynalite Gold Trident Power Hinge UST ProForce 75
Penley Graphite Lite Trident UL 3.5 Trident Ultralite 2.8
ProLaunch 45/55 Accuflex Evolution Grafalloy ProLite 35
TT Lite Dynamic Gold [ 35 ]
 Fireball Titanium Specs for the Fireball Ti driver
club #1 #1 #1 #1
stock# FBSTI loft 8o 9o 10o 12o
RH: 8o, 9o, 10o and 12o lie 56o 56o 56o 56o
Requires our patented hosel collar insert system. weight 198 198 198 198
face ht 56 56 56 56
volume 420 420 420 420

Tech Info:
.335 hosel bore
heel/toe #1: 112mm
15-3-3-3 Ti Alloy
hardness: 41
hosel depth: 38mm
bottom of hosel to heel: 32mm
requires insert hcir2
1-2 degree closed face (#1 only)
right hand only

Requires an insert

insert ring insert ferrule

stock #HCIR2 stock #INSFW

Fireball Fairway Woods

stock #FBW
RH: #3, #5, and #7

Specs for the Fireball Fairway Woods

club #3 #5 #7
loft 15o 18o 21o
lie 56o 56.5o 57o
weight 210 218 223 .335 hosel bore.
face ht 36 35 34 requires an insert:
volume 200 190 185 HCIR2 or INSFW

The latest, greatest slugger for golfers is here-the Accura 420cc Fireball Ti. This may be one of our best Ti drivers
ever, as our testers gave this great driver rave reviews-for both distance and accuracy!! So the Fireball Ti not only
hits longer than other drivers, (some testers rated it “much longer” than their Callawaytm and Pingtm drivers) but
the ball flies true and straight down the fairway. The Fireball Ti not only has a very thin variable face of special heat
treated 15-3-3-3 Ti for absolute maximum COR, but also utilizes a new L-Beam clubface design that minimizes
energy dissipation at impact and effectively expands the sweetspot area. Finished in a rich gloss black with chromed
Ti-this is one beautiful head as well!
Recommended Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
UST V2 55 Trident Power Hinge Trident Fuji LD
Trident Superlite L or A flex Trident UL 3.5 Trident Ultralite 2.8
Penley Graphite Lite Trident Superlite R or S flex Grafalloy ProLite 35
ProLaunch 45/55 Accuflex Evolution Aldila NV
[ 36 ] UST V2 65
Fireball Irons club #3 #4 #5 #6 #7 #8 #9 PW SW LW
loft 21o 24o 27o 30o 33o 37o 41o 44o 53o 58o
stock #FBI lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o
RH: 3-PW, SW, and LW weight 242 249 256 263 270 277 285 294 294 295
offset 2.5 2.5 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.5
Must be countersunk for use with graphite shafts. bounce 5o 9o 7o
Can be bent up to 2o for loft or lie.
Tech Info:
.370 hosel bore
blade length #5: 84mm
Exclusive blade height #5: 56mm
431 stainless
hardness: 22
bottom of hosel to heel: 30mm
hosel depth: 35mm
topline width: 5mm
hosel OD: 15mm
modified square grooves
chrome finish
RH only

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, PW, SW, LW

cavity channel

This head requires a ferrule.

. low center of gravity we recommend:
. high moment of inertia promotes forgiveness and distance. 9/16” Silver/Black
. progressive offsets. stock #FBSGI

Our Fireball irons are truly beautifully crafted iron heads as well as very high performance, game improvement clubs.
These irons feature a deep, undercut cavity channel embedded within a thick mass area at the rear of the sole. This
design moves weight back away from the face while lowering the center of gravity. This reduces twisting on mis-hits,
provides optimal trajectory, increased spin on all shots and yields a very, very solid, soft feel on all hits (even mis-hits)!
The playability is enhanced by a four-way cambered sole, thin top-line and minimal offsets for easy, accurate
alignment. The Fireball irons are so attractive, your golf buddies will not be able to take their eyes off of them! Ultra
forgiving, ultra playable and ultra attractive! The Fireball irons rank among the best irons on the planet!!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT LIte TT Black Gold
TT Release Custom Lite Rifle
[ 37 ]
Accura AG Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW
stock #AAGI loft 22o 25o 28o 31o 34o 37o 40o 44o 48o 53o 58o
RH only: 3-PW, AW, SW and LW lie 58o 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o
weight 244 251 258 265 272 279 286 290 295 295 295
Must be countersunk for use with graphite shafts. offset 2.5 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.5 0.5
Can be bent up to 2o for loft or lie. bounce 5o 6o 8o 5o
Tech Info
.370 hosel bore hardness: 22 hosel OD: 14mm
blade length #5: 81mm bottom of hosel to heel: 28mm modified square grooves
blade height #5: 50mm hosel depth: 36mm chrome finish
431 stainless topline width: 5mm RH only

This head requires a ferrule.

we recommend:
5/8” Black
stock #FMBI

Sold in sets: 3-PW Perimeter Weighted Muscle Back

individual pieces: #5, #7, AW, SW, LW
The Accura AG irons have the best of both worlds-extreme
perimeter weighting with an unusual muscle back insert in
the middle of the cavity. This design maintains not only a
maximum sweetspot and shot forgiveness, but also increased
performance with more mass behind the ball at impact.
Golf purists will not only appreciate the performance of the
new Accura AG, but the classic design features such as: the
thin topline, straight hosel with minimal offsets, tour grind
sole and classic square blade alignment. The Accura AG
irons incorporate classic styling with modern technology for
one of the most playable and accurate irons in golf.

Trident HP+ Hybrid Irons club #3 #4 #5 #6 #7 #8 #9 PW AW SW LW

stock #HPI loft 22o 25o 28o 30o 34o 37o 41o 45o 49o 53o 58o
RH only: 3-PW, AW, SW and LW lie 59o 59o 60o 61o 62o 63o 64o 64o 64o 64o 64o
weight 242 249 256 262 269 276 283 291 298 298 298
Must be countersunk for use with graphite shafts. offset 4.0 4.0 3.5 3.0 2.5 2.0 1.5 1.5 1.0 1.0 1.0
Can be bent up to 2o for loft or lie. bounce 6o 5o 8o 6o
Tech Info:
.370 hosel bore hardness: 22 hosel OD: 14mm
blade length #5: 82mm bottom of hosel to heel: 28mm modified square grooves
blade height #5: 53mm hosel depth: 34mm chrome finish
431 stainless topline width: 6mm RH only

Sold in sets: 3-PW or 5-PW

individual pieces: #5, #7, PW, AW, SW, LW

The HP+ Hybrid Irons are designed to improve per-

formance and build confidence for the mid to upper
handicapper. With extreme perimeter weighting, plus a
very low rearward center of gravity, the HP+ truly pres-
ents the average golfer with the opportunity to reach
new levels in game improvement! The extreme weight-
ing is achieved by making the face super thin and
responsive, and by using minimal weight at the top with
a thin, straight topline. In addition, the cavity is consid-
erably deeper than normal which helps move the center
of gravity lower and rearward. This weighting design
rewards all types of golf swings with straighter, higher
This head requires a ferrule. shots combined with an amazingly solid feel. Add in
we recommend:
5/8” Black progressive offsets, progressive sole width, a non-drag
stock #FMBI tour grind sole and you have the ultimate in a hybrid
game improvement club!
[ 38 ]
Miracle Wedge Oversize club wedge wedge wedge
stock #MIROW loft 52o 55o 60o
RH only: 52o, 55o and 60o lie 64o 64o 64o
weight 302 302 302
Must be countersunk for use with graphite shafts. offset 1.0 1.0 1.0
Can be bent up to 2o for loft or lie. bounce 4o 6o 4o

Exclusive

Tech Info:
.370 hosel bore
blade length: 84mm
blade height: 65mm
431 stainless
hardness: 21
bottom of hosel to heel: 42mm
hosel depth: 34mm
topline width: 5mm
hosel OD: 15mm
satin finish
RH only

Requires a Ferrule
we recommend
9/16” silver/grey
stock #FBSGI

One of our most popular wedges! The oversize Miracle wedge is the highest spin wedge ever created!! Made with the
same spin face as the original!! We designed an oversize head that is easier to use for the average player with a more
rounded sole and improved leading edge. We have also reduced the bounce of each Oversize Miracle Wedge for easier
playability from the fairway or around the greens. In addition to unparalleled spin, the Oversize Miracle Wedge pro-
vides incredible forgiveness. Fly it at the flag, no matter the situation, with the Oversize Miracle Wedge!!

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT Lite TT Black Gold
Custom Lite Rifle

[ 39 ]
 Accura Diamond Face Wedges A revolutionary design! We think the Accura Diamond Face Wedges are the
best looking, best performing wedges on the market today!
stock #ADFW *Best spin wedge on the market (other than our Miracle Wedge)! The hard,
RH/LH: 56o, 58o and 60o diamond face and redistributed weight promote optimal trajectory and
unequalled spin.
*Great playability with the oversize blade and four-way grind sole.
*Extremely attractive with our unique sandblasted cavity finish and tungsten copper
inserts.
*The sole cavity and topline inserts raise the CG for a more boring, higher
spinning shot like the Pro’s hit!
must be countersunk for use with graphite shafts
club wedge wedge wedge
can be bent up to 2o for loft or lie
loft 56o 58o 60o
lie 64o 64o 64o
weight 302 302 302
offset 0.0 0.0 0.0
bounce 8o 6o 6o

.431 Stainless Steel-hardness rating 21.

..370” hosel bore.
.Bottom of hosel to heel=41mm.
.Hosel depth=37mm.
.Requires ferrule. Hosel OD=15mm

This head requires a ferrule.

we recommend the
9/16” black/copper
stock #fcobi

Acclaim Wedge Lofto Lieo Wt Heel/toe Face Ht bounce

stock #ACLIMSW 60 64 302 81 70 10o
RH only: 60o
•431 Stainless
•.370 Bore, parallel tip
•Hosel Depth 35mm
•Bottom of hosel to heel 50mm

must be countersunk for use with graphite shafts

can be bent up to 2o for loft or lie

This head requires a ferrule.

we recommend the
3/8” black
stock #fmbis

Simply the most effective specialty club we have ever sold, the Acclaim wedge
has it all. The radiused sole, curved leading edge, and oversized face glides
effortlessly through long grass or sand without any twisting of the club face.
Not recommended for a tight lie in fairways.
[ 40 ]
KB IV Tour Spin Wedges club wedge wedge wedge wedge Tech Info:
stock #KB4TS loft 48o 52o 56o 60o
64o 64o 64o 64o .370 hosel bore
RH only: 48o,52o, 56o and 60o lie
431 stainless
weight 300 300 300 300
hardness: 21
Must be countersunk for use with graphite shafts. offset 0.5 0.5 0.5 0.5
Can be bent up to 2o for loft or lie. bounce 3o 5o 6o 2o bottom of hosel to heel: 41mm
hosel depth: 35mm
topline width: 6mm
hosel OD: 15mm
52o modified square grooves
RH only

48o

60o

56o

. high spin with boring trajectory.

. soft, solid feel.
. multiple lofts to fill distance gaps.
This head requires a ferrule.
we recommend the
5/8” black
stock #fmbi

The latest in a successful line of wedges, the new KB-4 Tour wedges. The loft/bounce configuration has been fine
tuned to provide the maximum playability for any type of shot requirement. The weight has been positioned to pro-
duce a more boring trajectory without compromising spin ratios or forgiveness. The rough face helps to increase spin,
while the tumble finish will improve durability for a long lasting, terrific look. With four equally spaced loft configura-
tions, we’ve made it easier than ever to mix and match lofts to fill gaps.

Recommended
Shafts:
For a higher trajectory, use: For a medium trajectory, use: For a lower trajectory, use:
Apollo Shadow Trident Power Hinge TT Dynamic Gold SL
Dynalite Gold SL Trident Vibracore TT Dynamic Gold
TX-90 TT lite TT Black Gold
Custom Lite Rifle
[ 41 ]
 One Ball Mallet True Balance
face length: 96mm face length: 101mm
weight: 425 grams head weight: 345g

Head/shaft sold together already

RH only RH only assembled. Just cut to length and grip.

One Ball Mallet putter True Balance Putter

stock #M1PT stock #TBALPT
uses 35” triple bend shaft head/shaft sold as a unit
Very solid feel. One of the very best! 4 Way Balance Putter
The only 4 way balanced putter on the market!

Starship The new 3 BallBlade

back weight is
20 grams only.

face length: 120mm

weight: 375 grams face length: 107mm
RH only RH only weight: 335 grams

Starship putter stock #STPT 3 Ball Blade Putter

.made from milled aircraft grade aluminum stock #3BB
.comes with two 55 gram weights in heel and toe uses 35” straight shaft
.uses 35” triple bend shaft
The new starship putter has more resistance to twisting
and larger moment of inertia than any other putter
available. The milled aluminum provides more rebound
and softer feel than steel or other materials.

weights for Starship: Go to

stock# 37G - 37 gram www.proswing.com
46G - 46 gram
55G - 55 gram for more putter selections
[ 42 ]
Pro Series Putters
recommended length: 33-35” The Original 3 Ball Putter
face length: 96mm face length: 96mm face length: 84mm face length: 85mm
weight: 386g weight: 386g weight: 350g weight: 340g

RH! LH! RH/LH!

2 Ball Blade Putter 2 Ball Blade Left Hand 1 Ball Putter 3 Ball Putter
stock #2BB stock #2BBLH stock #1BPT stock #3BPT
uses straight shaft uses straight shaft uses 35” or 50” triple bend shaft uses 35” or 50” triple bend shaft

Early Birdie and ISO Putters Dual Purpose Putters

recommended length: 33-35” can be made to standard or belly length
face length: 121mm face length: 115mm face length: 110mm face length: 135mm
weight: 300g weight: 320g

weight: 445g weight: 400g

Early Birdie Model B ISO Model C Block Putter Center Shafted Putter
stock #EBPB stock #ISOC stock #PT1A stock #PT3A
uses straight shaft (YEST) uses straight shaft (YEST) uses straight shaft uses straight shaft

Long/Belly Style Putters

recommended length: 41-49”
face length: 121mm face length: 137mm

weight: 445g weight: 400g

Long Putter Model 2 Brass Ball Face
stock #LPT2 stock #BBPT
uses straight 53” shaft uses straight 53” shaft
[ 43 ]
 Trident Shafts
Trident Fuji - L

Shaft stock # tip/butt weight torque length bend pt

Wood R-flex TFLWR .335/.605 62g 3.0o 46” mid
Wood S-flex TFLWS .335/.605 63g 2.9o 46” mid
Shaft Profile
For the player seeking an ultralite weight with a medium firm tip and a
medium trajectory. Fits a wide range of player types.

Trident Fuji - LD Frequency 270

Shaft stock # tip/butt weight torque length bend pt
U-flex TFLD .335/.600 70g 2.2o 48” mid-hi
U-flex TFLD350 .350/.600 70g 2.2o 48” mid-hi
Shaft Profile
Made specifically for long hitters
Not for use in fairway woods.

Trident T4XL .350

Trident is proud to offer the lightest and strongest .350 tip shaft in the industry, the T4 XL. The unique design increases swing speed and
provides the highest level of stability and performance ever offered in a super lite style shaft. The T4 gets our highest recommendation!
Shaft stock # tip/butt weight torque length bend pt Available in: Matte Black, Matte Grey and Deep Red
L-Flex T4XLL .350/.585 45g 4.9o 46” mid-lo
A-Flex T4XLA .350/.595 46g 4.7o 46” mid-lo
R-Flex T4XLR .350/.600 47g 3.9o 46” mid
S-Flex T4XLS .350/.600 47g 3.8o 46” mid-hi
Shaft Profile
For the player seeking a super light weight with a medium firm tip and
a medium trajectory. Incredible stability in a super light shaft.

Trident 350 UL .350

Our .350 tip Ultralite is the same design as the industry leading pro line. We recommend this shaft for all of our .350 hosel Ti
heads. These can also be used as a replacement shaft for any .350 OEM product (including those requiring a bore-thru).
Available in: Matte Black and Yellow
Shaft stock # tip/butt weight torque length bend pt
A-Flex 350ULA .350/.580 60g 3.9o 46” mid-lo
R-Flex 350ULR .350/.595 62g 3.5o 46” mid
S-Flex 350ULS .350/.595 63g 3.5o 46” mid
Shaft Profile
For the player seeking an ultralite weight with a medium firm tip and a
medium trajectory. Fits a wide range of player types.

VibraCore
Vibration dampening technology is increasingly popular among pro and amateur players alike. The Vibracore Vibration Dampening System
offers clubmakers the best value and quality in feel enhancing graphite. These shafts are designed to build confidence with their wonderful feel
and performance. Light weight (but not Ultralite)Vibracore shafts are absolutely the best graphite shafts available for irons!!
Shaft stock # tip/butt weight torque length bend pt Available in: Matte Black or Silver
Iron A-flex VIBIA .370/.600 78g 3.9o 41” mid-lo
Iron R-flex VIBIR .370/.600 80g 3.5o 41” mid
Iron S-flex VIBIS .370/.600 80g 3.5o 41” mid
Wood A-flex VIBWA .335/.600 68g 4.0o 45” mid-lo
Wood R-flex VIBWR .335/.600 68g 3.7o 45” mid Shaft Profile
Wood S-flex VIBWS .335/.600 68g 3.7o 45” mid For the player seeking a light weight, medium firm tip, low spin and
medium ball flight. Vibration dampening reduces fatigue and wear.
[ 44 ]
 Trident Shafts
Trident Ultralite 2.8
In a continuing effort to enhance performance, Trident has developed a series of high performance ultralite shafts. The Trident UL 2.8 is designed
for faster swing speeds by incorporating lower torque and a higher bend point. Trident is proud to offer such high quality shafts at an extremely
competitive price to compliment our full line of innovative products.

Shaft stock # tip/butt weight torque length bend pt Available in: Gloss Black
A-Flex TRIULABL .335/.580 63g 3.1o 46” mid
R-Flex TRIULRBL .335/.600 64g 2.8o 46” mid-hi
S-Flex TRIULSBL .335/.600 65g 2.8o 46” mid-hi
Shaft Profile
For the better player seeking an ultralite weight, firm tip, low spin and lower ball flight. Lower torque provides stability for faster tempos.

Trident Ultralite 3.5

The Trident Ultralite 3.5 has become our benchmark ultralite shaft. The Trident UL 3.5 is our best selling shaft for good reason.
The combination of torque, weight and bend point make it the most consistent performer when compared to all other ultralite
shafts. We challenge you to find a better shaft for use with steel or titanium drivers.
Shaft stock # tip/butt weight torque length bend pt Available in: Matte Black, Matte Grey and Gloss Blue
L-Flex TUL35L .335/.580 60g 3.8o 46” mid-lo
A-Flex TUL35A .335/.580 60g 3.6o 46” mid-lo
R-Flex TUL35R .335/.590 61g 3.5o 46” mid
S-Flex TUL35S .335/.590 62g 3.5o 46” mid
Shaft Profile
For the player seeking an ultralite weight, medium firm tip, low spin and
moderate ball flight. Fits a wide range of player types and ability.

Trident Super Lite .335 equivalent to the .350 T4XL

The Trident SuperLite is an engineering marvel! The Super Lite design has a reinforced tip and a more solid feel than any other brand of super
lite graphite. Better performance than comparable national brand shafts at half the price! Available in: Gloss Black and Deep Red
Shaft stock # tip/butt weight torque length bend pt
L-Flex TSLL .335/.580 48g 4.7o 46” mid-lo
A-Flex TSLA .335/.590 49g 4.5o 46” mid-lo
R-Flex TSLR .335/.610 49g 4.0o 46” mid
o
S-Flex TSLS .335/.610 50g 3.9 46” mid
X-Flex TSLX .335/.610 51g 3.8o 46” mid
Shaft Profile
For the player seeking a super lite weight, medium firm tip, and moderate ball flight. Unbelievable stability in a super lite design.

Trident Lite Weight

The Trident Lite Weight shaft has superior quality graphite, and is precision crafted for a truly high quality premium shaft. In fact, this shaft has much better qual-
ity than similar models by other graphite shaft manufacturers at a much lower price. Especially good performing in fairway woods. A great deal!
Shaft stock # tip/butt weight torque length bend pt Available in: Gloss Black only
o
R-Flex TL75R .335/.600 75g 4.0 45” mid-lo
o
S-Flex TL75S .335/.600 75g 3.9 45” mid-lo
Shaft Profile
For the player seeking a light weight, medium firm tip, and moderate ball flight.

Trident Hybrid XRT

Specifically designed for use with hybrid type clubs. Available in: Matte Black only
Shaft stock # tip/butt weight torque length bend pt
.370 R-Flex XRTIR .370/.600 87g 3.8o 43” mid
.370 S-Flex XRTIS .370/.600 87g 3.8o 43” mid
.335 R-Flex XRTWR .335/.610 73g 3.9o 43” mid-lo
.335 S-Flex XRTWS .335/.610 74g 3.8o 43” mid-lo Shaft Profile
The best hybrid shaft available in golf.

[ 45 ]
 Trident Shafts
Trident Power Hinge
The Power Hinge design puts more mass in an optimum position, just above the tip. This absorbs shock and vibration, transmitting only that
solid feel that inspires confidence. The unique Power Hinge design allows the tip section to act as a hinge-storing power until near impact where
it releases energy. A terrific shaft for use with fairway woods. The iron shaft is the most stable graphite we have tested.

Shaft stock # tip/butt weight torque length bend pt

Iron R-flex TBTIR .370/.600 85g 3.0o 39” mid-hi
Iron S-flex TBTIS .370/.600 87g 3.0o 39” mid-hi
Wood A-flex TBTA .335/.600 77g 3.3o 45” mid-hi
Shaft Profile
Wood R-flex TBTR .335/.600 79g 3.0o 45” mid-hi For the player seeking a standard weight graphite with a firm tip and a
Wood S-flex TBTS .335/.600 82g 3.0o 45” mid-hi medium trajectory. Very stable and reliable through impact.

Dynapower Shafts
Pro Swing is proud to offer our Dyna Power line of shafts. High fiber graphite throughout yields a very strong and reliable material for
performance and durability. A scratch resistant finish provides added protection to extend the life of the shaft.
Black: available in:
Ladies, Senior, Regular & Stiff
both woods and irons.
Black/Platinum: available in:
Ladies, Senior, Regular & Stiff
both woods and irons.

Matte Blue: available in:

Ladies, Senior, & Regular
both woods and irons

Shaft stock # tip/butt weight torgue length bend pt

Wood Ladies EGWL .335/.580 73g 5.0o 45” low
Wood Senior EGWA .335/.580 73g 5.0o 45” low
Wood Regular EGWR .335/.580 73g 4.7o 45” mid Shaft trimming instructions for Dyna Power shafts: Wood
shafts are butt trim only. For iron shafts, use the charts
Wood Stiff EGWS .335/.580 74g 4.5o 45” mid below to determine tip trim, then butt trim to length.
Iron Ladies EGIL .370/.580 70g 4.5o 39” low
Iron Senior EGIA .370/.580 70g 4.5o 39” low Tip trim for Dyna Power iron shafts
Iron Regular EGIR .370/.580 72g 4.0o 39” mid Club #1i #2i #3i #4i #5i #6i #7i #8i #9i wedges
Iron Stiff EGIS .370/.580 72g 4.0o 39” mid tip trim 0” 0” 0” .5” 1” 1.5” 2” 2.5” 3” 3”

BUBBLE Graphite Shafts

Bubble Shafts
Bubble shafts have a slightly firmer tip than most graphite shafts which provides stability and a slightly lower trajectory. We have incorporated a
standard weight along with a “bulge” region just below the grip. This combination provides a more consistent shot pattern for irons.

Shaft stock # tip/butt weight torque length bend pt Available in: Copper/Black
Iron L-flex ABGIL .370/.580 95g 3.6o 39” mid
Iron A-flex ABGIA .370/.580 95g 3.6o 39” mid
Iron R-flex ABGIR .370/.580 95g 4.0o 39” mid
Shaft Profile
For the player seeking a standard weight, firm tip, low spin and medium low ball
flight. Tip trim to length. This design will not accommodate butt trimming.

[ 46 ]
True Temper steel Shafts
TT Lite
Shaft stock # tip/butt weight length bend pt
R/S Wood UTTLWC .335/.600 126g 48” mid
R/S Iron UTTLIC .370/.600 128g 43” mid Shaft Profile
A/L Wood U2LWAL .335/.580 110g 46” mid For the average player seeking a medium firm tip and medium trajecto-
A/L Iron U2LIAL .370/.580 110g 40” mid ry. Fits average to slightly above average swing speeds and/or tempos.

Dynalite
Shaft stock # tip/butt weight length bend pt
R/S Wood ULWC .335/.600 127g 47” low
R/S Iron ULIC .370/.600 122g 42” low Shaft Profile
A/L Wood ULWAL .335/.580 110g 46” low For the average player seeking a soft tip and high trajectory. Fits aver-
A/L Iron ULIAL .370/.580 112g 41” low age to slightly below average swing speeds and/or slow tempos.

Dynamic
Shaft stock # tip/butt weight length bend pt
R/S Wood UDWC .335/.600 131g 47” high
R/S Iron UDIC .370/.600 129g 43” high Shaft Profile
For the average player seeking a standard weight, firm tip and low tra-
jectory. Fits faster than average swing speeds and/or quick tempos.

Release
Shaft stock # tip/butt weight length bend pt
Men’s Wood USLWM .335/.600 110g 45” low
Men’s Iron USLIM .370/.600 117g 43” low Shaft Profile
Lady’s Wood USLWL .335/.580 106g 44” low For the player seeking a light weight, soft tip and high trajectory. Fits
Lady’s Iron USLIL .370/.580 103g 39” low slower than average swing speeds and/or slow tempos.

Dynamic Gold *available in a .350 tip wood shaft

**available in R400 and S400 .355 taper irons
Shaft stock # tip/butt weight length bend pt
Wood R300* UDGWR3 .335/.600 125g 46” high
Wood S300* UDGWS3 .335/.600 127g 46” high
Wood X100 UDGWX1 .335/.600 124g 46” high
Iron R300** UDGIR3 .370/.600 127g 41” high Shaft Profile
Iron S300** UDGIS3 .370/.600 130g 41” high For the better player seeking a standard weight, firm tip and low trajec-
Iron X100 UDGIX1 .370/.600 130g 41” high tory. Fits faster than average swing speeds and/or quick tempos.

Dynamic Gold SL
Shaft stock # tip/butt weight length bend pt
Iron R300 UDGSLIR3 .370/.600 104g 41” high
Iron S300 UDGSLIS3 .370/.605 109g 41” high Shaft Profile
For the better player seeking a light weight, firm tip and low trajectory.
Fits average to faster than average swing speeds and/or quick tempos.

Dynamic Gold Lite available in .355 tapered irons

Shaft stock # tip/butt weight length bend pt
Wood R300 DGLWR3 .335/.610 110g 46” mid
Wood S300 DGLWS3 .335/.610 113g 46” mid
Iron R300 DGLIR3 .370/.610 109g 41” mid Shaft Profile
Iron S300 DGLIS3 .370/.610 109g 41” mid For the better player seeking a light weight, medium firm tip and medi-
um trajectory. Fits average swing speeds and/or moderate tempos.

Dynalite Gold
Shaft stock # tip/butt weight length bend pt
Wood R300 ULGWR3 .335/.600 112g 45” low
Wood S300 ULGWS3 .335/.600 112g 45” low
Iron R300 ULGIR3 .370/.600 118g 40” low Shaft Profile
For the better player seeking a light weight, soft tip and high trajectory.
Iron S300 ULGIS3 .370/.600 118g 40” low Fits average swing speeds and/or slow to moderate tempos.

[ 47 ]
 True Temper steel Shafts
Dynalite Gold SL
Shaft stock # tip/butt weight length bend pt
Iron R300 ULGSLIR3 .370/.600 104g 41” low
Iron S300 Shaft Profile
ULGSLIS3 .370/.600 115g 41” low For the better player seeking a light weight, soft tip and high trajectory.
Fits average swing speeds and/or slow to moderate tempos.

TX-90
Shaft stock # tip/butt weight length bend pt
Wood Regular TX90WR .335/.610 105g 46” low
Wood Stiff TX90WS .335/.610 109g 46” low
Iron Senior TX90IA .370/.600 100g 41” low Shaft Profile
Iron Regular TX90IR .370/.600 104g 41” low For the average player seeking a light weight, soft tip and high trajectory.
Iron Stiff TX90IS .370/.600 107g 41” low Fits average to slower than average swing speeds and/or slower tempos.

Black Gold Irons Stepless, Frequency Tuned Sets 3-Pw

Shaft stock # tip/butt weight length bend pt
Iron Regular UBKIR .370/.600 125g-111g 40”-36.5” high
Iron Stiff UBKIS .370/.600 131g-117g 40”-36.5” high Shaft Profile
For the better player seeking a standard weight, firm tip and low trajec-
41” shafts available individually for #1, #2, and wedge heads. Can tory. Fits faster than average swing speeds and/or quick tempos.
also replace any shaft in the set.

True Temper Sensicore Shafts

SensiCore Technology
SensiCore is a patented technology designed to absorb the vibration of hitting a golf shot. A frequency tuned polymer core, located
inside the shaft, eliminates up to 70% of unwanted vibration at impact. SensiCore radically improves feel and provides golfers the
ability to practice and play longer because it decreases the harmful effects of "shock" on the hands, wrists, elbows, and shoulders.

Custom Lite with SensiCore

Shaft stock # tip/butt weight length bend pt
Iron R/S SCLIRS .370/.610 117g 43” mid
Iron A/L SCLIAL .370/.580 114g 43” mid Shaft Profile
For the average player seeking a medium firm tip and medium trajecto-
ry with a soft feel. Fits average swing speeds and/or tempos.

Dynamic Gold with SensiCore

Shaft stock # tip/butt weight length bend pt
Wood R300 SDGWR3 .335/.600 121g 46” high
Wood S300 SDGWS3 .335/.600 123g 46” high
Iron R300 SDGIR3 .370/.600 124g 41” high Shaft Profile
For the better player seeking a standard weight, firm tip and low trajec-
Iron S300 SDGIS3 .370/.600 127g 41” high tory. Fits faster than average swing speeds and/or quick tempos.

Dynamic Gold Lite with SensiCore

Shaft stock # tip/butt weight length bend pt
Wood R300 SDGLWR3 .335/.610 114g 46” mid
Wood S300 SDGLWS3 .335/.610 117g 46” mid
Iron R300 SDGLIR3 .370/.610 113g 41” mid Shaft Profile
For the better player seeking a standard weight, firm tip and low trajec-
Iron S300 SDGLIS3 .370/.610 113g 41” mid tory. Fits faster than average swing speeds and/or quick tempos.

Dynalite Gold with SensiCore

Shaft stock # tip/butt weight length bend pt
Wood R300 SYLWR3 .335/.600 116g 45” low
Wood S300 SYLWS3 .335/.600 116g 45” low
Iron R300 SYLIR3 .370/.600 120g 40” Shaft Profile
low
For the better player seeking a light weight, soft tip and high trajectory.
Iron S300 SYLIS3 .370/.600 124g 40” low
Fits average swing speeds and/or slow to moderate tempos.
Go to WWW.PROSWING.COM for more shaft selections ! [ 49 ]
 Apollo steel Shafts
Shadow
Shaft stock # tip/butt weight length bend pt
R/S Wood SHWRS .335/.600 128g 47” low
R/S Iron SHIRS .370/.600 122g 42” low Shaft Profile
A/L Wood SHWAL .335/.580 122g 45” low For the average player seeking a soft tip and high trajectory. Fits aver-
A/L Iron SHIAL .370/.580 110g 40” low age to slightly below average swing speeds and/or slow tempos.

Stepless Steel
Shaft stock # tip/butt weight length bend pt
Iron R/S ASTEPIRS .370/.580 130g 41” mid
Wood R/S ASTEPWRS .335/.580 133g 46” mid Shaft Profile
For the better player seeking a medium firm tip and medium trajectory.
Fits average to slightly above average swing speeds and/or tempos.

Standard Steel
Shaft stock # tip/butt weight length bend pt
R/S Wood SSWRS .335/.600 135g 46” mid
R/S Iron SSIRS .370/.600 130g 40” mid Shaft Profile
A/L Wood SSWAL .335/.580 133g 45” mid For the average player seeking a medium firm tip and medium trajecto-
A/L Iron SSIAL .370/.580 120g 39” mid ry. Fits average to slightly above average swing speeds and/or tempos.

Royal Precision Shafts

Rifle Irons
Shaft sold as stock # tip/butt weight length bend pt
Iron set 5.5 3-pw UFMRI55 .370/.610 110-135g 41-36” high
#1/2 iron 5.5 #1/2 URI55 .370/.610 135g 41” high
Wedge 5.5 Wedge URW55 .370/.610 110g 36” high Shaft Profile
Iron set 6.5 3-pw UFMRI65 .370/.610 110-135g 41-36” high For the better player seeking a standard weight, firm tip and low tra-
#1/2 iron 6.5 #1/2 URI65 .370/.610 135g 41” high jectory. Fits faster than average swing speeds and/or quick tempos.
Wedge 6.5 Wedge URW65 .370/.610 110g 36” high

Rifle Woods
Shaft stock # tip/butt weight length bend pt
5.5 Wood UFMWR55 .335/.600 123g 46” high
6.0 Wood UFMWR60 .335/.600 124g 46” high Shaft Profile
6.5 Wood UFMWR65 .335/.600 129g 46” high For the better player seeking a standard weight, firm tip and low tra-
7.0 Wood UFMWR70 .335/.600 129g 46” high jectory. Fits faster than average swing speeds and/or quick tempos.

Diamond Rifle Irons

Shaft stock # tip/butt weight length bend pt
5.0 Iron DRIFIR .370/.600 128g 43.5” high
6.0 Iron DRIFIS .370/.600 134g 43.5” high Shaft Profile
For the better player seeking a standard weight, firm tip and low tra-
jectory. Fits faster than average swing speeds and/or quick tempos.

Trim instructions for Rifle shafts Chart RI iron 1 2 3 4 5 6 7 8 9 wedges

Shaft Trim instruction tip trim 0.00” .625” 1.25” 1.875” 2.5” 3.125” 3.75” 4.375” 5.0” 5.625”
Rifle iron Sets butt trim only Chart RW wood 1 3 5 7 9 11
Rifle Wedges butt trim only tip trim 0.00” 1.5” 3.0” 4.5” 4.5” 4.5”
Rifle #1/2 Chart: RI
Rifle Woods Chart: RW Use the above charts for Royal Precision Rifle shafts only! Determine the
Diamond Rifle Chart: RI amount to be trimmed from the tip, then butt trim to the final playing length.

[ 50 ] Go to WWW.PROSWING.COM for more shaft selections !

 Grafalloy Graphite Shafts
Prototype Comp NT 65 Parallel tip section: 4” Available in .335 and .350 tip
Shaft stock # tip/butt weight torque length bend pt
R-Flex GCNTR .335/.600 63g 3.1o 46” mid
S-Flex GCNTS .335/.600 64g 3.1o 46” mid Shaft Profile
R-Flex .350 GCNTR350 .350/.600 63g 3.1 o
46” mid For the better player seeking a firm tip and mid trajectory. Fits
average to above average swing speeds and/or tempos.
o
S-Flex .350 GCNTS350 .350/.600 64g 3.1 46” mid
Blue Parallel tip section: 3.5” R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
R-Flex GBLUR .335/.600 62g 2.8o 46” high
S-Flex GBLUS .335/.600 63g 2.8o 46” high
X-Flex GBLUX .335/.600 63g 2.8o 46” high Shaft Profile
R-Flex .350 GBLUR350 .350/.600 62g 2.8o 46” high For the better player seeking a firm tip and low trajectory. Fits
above average swing speeds and/or tempos.
o
S-Flex .350 GBLUS350 .350/.600 63g 2.8 46” high
ProLaunch Blue Parallel tip section: 45-2”,55-3”,65&75-4.5” ProLaunch Blue 65 R and S also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
45 A-Flex GPLB45A .335/.595 44g 5.0o 46” mid-lo
45 R-Flex GPLB45R .335/.595 44g 5.0o 46” mid-lo
45 S-Flex GPLB45S .335/.595 48g 5.0o 46” mid-lo
55 R-Flex GPLB55R .335/.600 56g 4.0o 46” mid-lo
55 S-Flex GPLB55S .335/.605 57g 4.0o 46” mid-lo
65 R-Flex GPLB65R .335/.600 64g 3.2o 46” mid-lo
65 S-Flex GPLB65S .335/.605 64g 2.8o 46” mid-lo Shaft Profile
65R-Flex .350 GPLB65R350 .350/.600 64g 3.2o 46” mid-lo For the better player seeking a medium firm tip and medium
65S-Flex .350 GPLB65S350 .350/.600 64g 2.8o 46” mid-lo high trajectory. Fits different swing types depending on
75 R-Flex GPLB75R .335/.600 75g 2.9o 46” mid-lo model.
75 S-Flex GPLB75S .335/.600 76g 2.9o 46” mid-lo
ProLaunch HY Hybrid Parallel tip section: 4”
Shaft stock # tip/butt weight torque length bend pt
R-Flex GPLHYR .335/.600 80g 2.4o 41” low
S-Flex GPLHYS .335/.600 81g 2.4o 41” low
Tip trim instructions: Shaft Profile
3 wood equivalent: butt trim 7 wood equivalent: .75” from tip A perfect choice for hybrid type clubs.
5 wood equivalent: .5” from tip 9 wood equivalent: 1.0” from tip

ProLaunch Blue Irons Parallel tip section: 6”

Shaft stock # tip/butt weight torque length bend pt
R-Flex GPLBIR .370/.600 81g 3.0o 41” low
S-Flex GPLBIS .370/.600 82g 3.0o 41” low Shaft Profile
For the average player seeking high trajectory. Fits average to
slightly above average swing speeds and/or tempos.

ProLite 35/45 Parallel tip section: 2” ProLite 35 R and S .350 tip: black only.
Shaft tip/butt weight torque length bend pt
stock # ProLite 35 .335 tip: black or burgundy,ProLite 45: black only.
35 R-Flex* .335/.605 62g
GL35WR 3.5o 46” high
35 S-Flex* .335/.605 64g
GL35WS 3.5o 46” high
35 X-Flex .335/.605 66g
GL35WX 3.5o 46” high
35R-Flex .350 GL35WR350 .350/.600 62g 3.5o 46” high
Shaft Profile
35S-Flex .350 GL35WS350 .350/.600 64g 3.5o 46” high ProLite 35 produces a low ball flight and fits faster
45 R-flex GL45WR .335/.605 60g 4.5o 46” mid swing speeds. ProLite 45 produces a mid trajectory
45 S-flex GL45WS .335/.605 62g 4.5o 46” mid and fits average swing speeds.

Pro Custom Irons/Woods Parallel tip section: woods-6”, irons-8”

Shaft stock # tip/butt weight torque length bend pt
R/S Iron GPCIRS .370/.590 77g 3.9o 43” mid Shaft Profile
R/S Wood GPCWRS .335/.600 70g 5.0o 48” mid For the average player seeking a medium firm tip and
A/L Iron GPCIAL .370/.590 74g 4.1o 43” mid medium trajectory. Fits average to slightly above average
A/L Wood GPCWAL .335/.595 68g 5.0o 48” mid swing speeds and/or tempos.
[ 51 ]
 UST Graphite Shafts
ProForce V2 55/65 Parallel tip section: 4” V2 65 R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
55 Senior USTV255A .335/.600 56g 3.7o 46” low
55 Regular USTV255R .335/.600 57g 3.7o 46” low
55 Stiff USTV255S .335/.600 57g 3.7o 46” low
65 Senior USTV265A .335/.600 63g 3.1o 46” mid Shaft Profile
65 regular USTV265R .335/.600 65g 3.0o 46” mid Playability varies depending on model.
65 Stiff USTV265S .335/.600 66g 3.0o 46” mid
65 Reg .350 USTV2R350 .350/.600 66g 2.9o 46” mid
65 Stiff .350 USTV2S350 .350/.600 67g 2.9o 46” mid

ProForce 65/75 Gold Parallel tip section: 4” ProForce 65 R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
65 A-Flex USTGO65A .335/.605 69g 3.4o 46” mid
65 R-Flex USTGO65R .335/.610 71g 3.4o 46” mid
65 S-Flex USTGO65S .335/.610 71g 3.4o 46” mid
65 Reg .350 USTGO65R350 .350/.610 72g 3.3o 46” mid
65 Stiff .350 USTGO65S350 .350/.610 72g 3.3o 46” mid
75 R-Flex USTGO75R .335/.615 77g 3.3o 46” mid-hi
75 S-Flex USTGO75S .335/.618 81g 3.3o 46” mid-hi
65 L-Blue PF65LBU .335/.580 66g 3.6o 44” mid
65 L-Pink PF65LPG .335/.580 66g 3.6o 44” mid
65 L-Orange PF65LOR .335/.580 66g 3.6o 44” mid
Shaft Profile
Playability varies depending on model.

ProForce XL Parallel tip section: 4” ProForce XL available in .350 tip

Shaft stock # tip/butt weight torque length bend pt
A-Flex USTXLA .335/.595 58g 4.0o 46” mid-lo
R-Flex USTXLR .335/.600 61g 3.9o 46” mid-lo
S-Flex USTXLS .335/.600 61g 3.9o 46” mid-lo
A-Flex .350 USTXLA350 .350/.595 59g 3.9o 46” mid-lo Shaft Profile
R-Flex .350 USTXLR350 .350/.600 62g 3.8o 46” mid-lo For the better player seeking a medium firm tip and medium high tra-
jectory.
S-Flex .350 USTXLS350 .350/.600 62g 3.8o 46” mid-lo

ProForce RV2 Graphite Iron Parallel tip section: 5.5”

Shaft stock # tip/butt weight torque length bend pt
Iron 75 R-Flex RV75IR .370/.595 81g 3.2o 40” mid-lo
Iron 75 S-Flex RV75IS 370/.600 83g 3.2o 40” mid-lo
Iron 95 R-Flex RV95IR 370/.600 94g 2.9o 40” mid Shaft Profile
Iron 95 S-Flex RV95IS 370/.600 95g 2.9o 40” mid Playability varies depending on model.

Harmon Tour Design CB 60/65/70 Parallel tip section: 3.5”

Shaft stock # tip/butt weight torque length bend pt
CB 60 R-Flex HCB60R .335/.600 59g 3.8o 46” low
CB 60 S-Flex HCB60S .335/.600 60g 3.7o 46” low
CB 65 R-Flex HCB65R .335/.600 66g 3.3o 46” mid-lo
CB 65 S-Flex HCB65S .335/.605 68g 3.2o 46” mid-lo
CB 70 R-Flex HCB70R .335/.605 71g 3.4o 46” mid
CB 70 S-Flex HCB70S .335/.605 71g 3.2o 46” mid Shaft Profile
Playability varies depending on model.
[ 52 ]
 UST Graphite Shafts
Competition 65 Light Parallel tip section: 4.5”
Shaft stock # tip/butt weight torque length bend pt
A/L Wood USTCWAL .335/.595 63g 4.9o 47” low Shaft Profile
R/S Wood USTCWRS .335/.600 66g 4.9o 47” mid-lo For the average player seeking a soft tip and a mid high
trajectory.

Competition Pro Parallel tip section: woods-3.5”, irons-5.5”

Shaft stock # tip/butt weight torque length bend pt
L-Flex Wood UCPWL .335/.565 74g 5.4o 45” mid-lo
A-Flex Wood UCPWA .335/.590 76g 5.2o 45” mid-lo
R-Flex Wood UCPWR .335/.595 78g 4.9o 45” mid
S-Flex Wood UCPWS .335/.600 81g 4.9o 45” mid Shaft Profile
L-Flex Iron UCPIL .370/.565 70g 5.0o 40” mid-lo For the average player seeking a soft tip and high trajectory.
A-Flex Iron UCPIA .370/.590 75g 4.6o 40” mid-lo Fits average to slightly below average swing speeds and/or
o slow tempos.
R-Flex Iron UCPIR .370/.590 75g 4.3 40” mid
o
S-Flex Iron UCPIS .370/.600 78g 4.3 40” mid

Low Carb Parallel tip section: 4”

Shaft stock # tip/butt weight torque length bend pt
R-Flex USTLCR .335/.615 52g 3.7o 46” low Shaft Profile
S-Flex USTLCS .335/.615 52g 3.7o 46” low For the better player seeking a firm tip and high trajectory. Fits
average to slightly above average swing speeds smooth tempos.

Parallel tip section: 4” iRod Driver also available in .350 tip

iRod Driver
Shaft stock # tip/butt weight torque length bend pt
R-Flex IRODDR .335/.605 65g 2.6o 46” low
S-Flex IRODDS .335/.605 65g 2.6o 46” low
R-Flex .350 IRODDR350 .350/.605 66g 2.5o 46” low Shaft Profile
For the better player seeking a firm tip, light weight, low spin and
o
S-Flex .350 IRODDS350 .350/.605 66g 2.5 46” low high launch.

iRod Hybrid Parallel tip section: iron and util. 5.5”, fwy 4”

Shaft stock # tip/butt weight torque length bend pt

Long Iron R IRODIR .370/.595 78g 2.3o 41” low
Long Iron S IRODIS .370/.600 81g 2.3o 41” low
Utility R IRODUR .370/.595 81g 2.4o 41” mid-lo
Utility S IRODUS .370/.600 83g 2.4o 41” mid-lo
Fairway R IRODWR .335/.610 73g 3.4o 44” mid-lo
Fairway S IRODWS .335/.610 73g 3.4o 44” mid-lo Shaft Profile
A perfect choice for hybrid type clubs. Firm tip for stability.

[ 53 ]
 Aldila Graphite Shafts
NV 55/65/75 Parallel tip section: 3” NV 55 and 65 R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
55 R-Flex ANV55R .335/.615 56g 3.9o 46” mid-hi
55 S-Flex ANV55S .335/.620 57g 3.9o 46” mid-hi
55R-Flex .350 ANV55R350 .350/.615 56g 3.9o 46” mid-hi
55S-Flex .350 ANV55S350 .350/.620 57g 3.9o 46” mid-hi
65 R-Flex ANV65R .335/.620 67g 3.5o 46” mid-hi
65 S-Flex ANV65S .335/.625 67g 3.5o 46” mid-hi Shaft Profile
65R-Flex .350 ANV65R350 .350/.620 67g 3.5o 46” mid-hi For the better player seeking a firm tip and mid
65S-Flex .350 ANV65S350 .350/.625 67g 3.5o 46” mid-hi trajectory. Fits average to above average swing speeds
75 R-Flex ANV75R .335/.620 78g 2.8o 46” mid-hi and/or tempos. Has performed extremely well in our
launch monitor testing with titanium heads.
75 S-Flex ANV75S .335/.625 78g 2.8o 46” mid-hi

Aldila NVS 65 R and S flexes are also available in .350 tip

NVS 65 Parallel tip section: 3”
Shaft stock # tip/butt weight torque length bend pt
R-Flex NVSR .335/.625 67g 3.6o 46” mid
S-Flex NVSS .335/.625 67g 3.6o 46” mid Shaft Profile
R-Flex .350 NVSR350 .350/.625 67g 3.6o 46” mid For the better player seeking a firm tip and medium
trajectory. Fits average to slightly above average swing
S-Flex .350 NVSS350 .350/.625 67g 3.6o 46” mid speeds and/or tempos.

Gamer Driver Parallel tip section: 4”, L-flex: 3.5”

Shaft stock # tip/butt weight torque length bend pt
Regular AGDWR .335/.600 63g 3.5o 46” mid
Stiff AGDWS .335/.600 64g 3.5o 46” mid Shaft Profile
Senior AGDWA .335/.590 63g 3.9o 46” mid For the average player seeking a medium firm tip and
Ladies AGDWL .335/.590 62g 4.5o 46” mid-lo medium trajectory. Fits averge to slightly above average
swing speeds and/or tempos.

Gamer Hybrid Fairway Parallel tip section: 3.5”

Shaft stock # tip/butt weight torque length bend pt
Regular AGFWR .335/.605 65g 3.5o 46” mid
Shaft Profile
Stiff AGFWS .335/.605 65g 3.5o 46” mid For the average player seeking a medium firm tip and
Senior AGFWA .335/.600 65g 3.9o 46” mid medium trajectory. Fits averge to slightly above average
swing speeds and/or tempos.

Gamer Irons Parallel tip section: 5.5”

Shaft stock # tip/butt weight torque length bend pt
Regular AGIR .370/.600 84g 3.2o 41” mid
Stiff AGIS .370/.600 85g 3.2o 41” mid Shaft Profile
Senior AGIA .370/.590 83g 3.2o 41” mid For the average player seeking a medium firm tip and
Ladies AGIL .370/.590 59g 4.5o 40” mid-lo medium trajectory. Fits averge to slightly above average
swing speeds and/or tempos.

Value Series Parallel tip section: woods - 7”, irons - 6”

Shaft stock # tip/butt weight torque length bend pt
A/L Wood AWAL .335/.585 77g 5.5o 46” low Shaft Profile
A/L Iron AIAL .370/.580 79g 4.5oo 41” low For the average player seeking a soft tip and high trajectory.
R/S Wood AWRS .335/.600 87g 5.5o 46” mid-lo Fits average to slightly below average swing speeds and/or
R/S Iron AIRS .370/.600 88g 4.5 41” mid-lo slow tempos.

TC Pro 85 Irons Parallel tip section: 2”

Shaft stock # tip/butt weight torque length bend pt
Regular Set ATCIR .370/.600 85g 3.1o _ 2.7o 39”-35.5” mid
Stiff Set ATCIS .370/.600 85g 3.1o _ 2.7o 39”-35.5” mid Shaft Profile
Reg. taper tip TCTPIR .335/.600 85g 3.1o _ 2.7o 39”-35.5” mid For the better player seeking a medium firm tip and medium trajecto-
ry. Fits average to slightly above average swing speeds and/or tempos.
o_ o
Stiff taper tip TCTPIS .335/.600 85g 3.1 2.7 39”-35.5” mid
[ 54 ] Go to WWW.PROSWING.COM for more Aldila selections !
 Penley Graphite Shafts
Graphite Lite Irons/Woods Graphite Lite R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
Iron L-Flex PNGLIL .370/.600 65g 4.0o 41” low
Iron A-Flex PNGLIA .370/.600 68g 3.9o 41” low
Iron R-Flex PNGLIR .370/.600 70g 3.7o 41” mid
Iron S-Flex PNGLIS .370/.600 75g 3.3o 41” high

Wood L-Flex PNGLWL .335/.600 68g 4.4o 46” low

Wood A-Flex PNGLWA .335/.600 69g 4.4o 46” low Shaft Profile
Playability varies depending on flex.
Wood R-Flex PNGLWR .335/.600 69g 4.0o 46” mid
Wood S-Flex PNGLWS .335/.600 73g 3.9o 46” mid Parallel tip section: Woods 3.5”
R-Flex .350 PNGLWR350 .350/.600 69g 4.0o 46” mid Irons n/a
S-Flex .350 PNGLWS350 .350/.600 73g 3.9o 46” mid

Tour Lite Parallel tip section: 3.5” Tour Lite R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
A-Flex PNTLA .335/.600 60g 3.5o 47” mid
R-Flex PNTLR .335/.600 62g 3.3o 47” mid
S-Flex PNTLS .335/.600 64g 3.1o 47” mid
X-Flex PNTLX .335/.600 66g 2.9o 47” high Shaft Profile
R-Flex .350 PNTLR350 .350/.600 62g 3.3o 47” mid For the better player seeking a firm tip and medium trajectory. Fits
S-Flex .350 PNTLS350 .350/.600 64g 3.1o 47” mid average to above average swing speeds and/or faster tempos.
50” XX-FLEX PNTL50X .335/.600 70g 2.9o 50” high

Parallel tip section: 2.5”

Caliente
Shaft stock # tip/butt weight torque length bend pt
R-Flex PNCALR .335/.610 64g 3.4o 47” mid Shaft Profile
S-Flex PNCALS .335/.610 66g 3.2o 47” mid-hi For the better player seeking a medium firm tip and medium trajecto-
ry. Fits average to slightly above average swing speeds and/or tempos.

P2 Driver Parallel tip section: n/a

Shaft stock # tip/butt weight torque length bend pt
R-Flex P2DR .335/.610 65g 2.8o 46” high Shaft Profile
S-Flex P2DS .335/.610 68g 2.5o 46” high For the player seeking a standard weight and low trajectory.

ETA 55/ 75 Tour Parallel tip section: 2.5” *ETA 55 R and S flexes are also available in .350 tip
Shaft stock # tip/butt weight torque length bend pt
55 R-Flex PETA55R .335/.600 57g 4.3o 46” mid-lo
55 S-Flex PETA55S .335/.600 57g 4.0o 46” high
75 R-Flex PETA75R .335/.600 78g 2.6o 47” mid-hi
75 S-Flex PETA75S .335/.600 78g 2.5o 47” high Shaft Profile
For the better player seeking a firm tip and lower trajectory. Fits
Tour S-Flex PETAS .335/.605 67g 2.5o 47” high above average swing speeds and/or faster tempos.
Tour X-Flex PETAX .335/.605 67g 2.5o 47” high
55R .350 PETA55R350 .350/.600 57g 4.3o 46” mid-lo ETA shafts available only for a limited time -
55S .350 PETA55S350 .350/.600 57g 4.0o 46” high No back orders

*Stealth 70 R and S flexes are also available in .350 tip

Stealth 60/70 Parallel tip section: 3.5”
Shaft stock # tip/butt weight torque length bend pt
Stealth 60 S PNST60S .335/.600 65g 2.9o 47” high
Stealth 60 X PNST60X .335/.600 66g 2.7o 47” high
Stealth 70R .350 PNST70R350 .335/.605 71g 3.5o 46” high Shaft Profile
Stealth 70S .350 PNST70S350 .335/.610 73g 3.5o 46” high For the better player seeking a firm tip and low trajectory. Fits
Stealth shafts available only for a limited time - above average swing speeds and/or faster tempos.
No back orders
[ 55 ]
 Accuflex Graphite Shafts
Deep red to white fade
VS 339
Shaft stock # tip/butt weight torque length bend pt
R-Flex AFX339R .335/.600 67g 2.8o 47” mid
S-Flex AFX339S .335/.600 69g 2.8o 47” high Shaft Profile
For the better player seeking a firm tip and variable trajectory depend-
ing on flex. Fits above average swing speeds and/or tempos.

Evolution
Shaft stock # tip/butt weight torque length bend pt
R-Flex AFEVOR .335/.600 70g 2.8o 46” mid
S-Flex AFEVOS .335/.600 72g 2.8o 46” mid Shaft Profile
For the better player seeking a firm tip and medium trajectory. Fits
above average swing speeds and/or tempos.

Pro LD Blue to white fade

Shaft stock # tip/butt weight torque length bend pt
X-Flex APLDX .335/.590 72g 2.6o 50” high
Shaft Profile
For the better player seeking a long drive.

Icon V.2
Shaft stock # tip/butt weight torque length bend pt
R-Flex AFXIC2R .335/.600 66g 3.2o 46” mid-hi Shaft Profile
S-Flex AFXIC2S .335/.600 68g 3.2o 46” mid-hi For the better player seeking an ultralite weight, firm tip and medium
low trajectory. Fits average to above average swing speeds and/or tempos.

Assassin 2
Shaft stock # tip/butt weight torque length bend pt
R-Flex AFXWCR .335/.600 65g 3.5o 46.5” mid Shaft Profile
S-Flex AFXWCS .335/.600 67g 3.5o 46.5” mid For the better player seeking an light weight, firm tip and medium
trajectory. Fits average swing speeds and/or tempos.

Putter Shafts
stock# tip/butt weight length
straight 35” stepless putter YEST .370/.580 112g 35”

straight 52” stepless putter LONGPT .370/.580 185g 52”

double bend putter BEP1 .370/.580 135g 41”

triple bend stepless putter TBEP .370/.580 115g 35”

50” triple bend putter LTBEP .370/.580 176g 50”

HM-40 putter HM40PT .370/.580 82g 35”

Graphite putter black PSIBL .370/.580 78g 37.5”

Graphite putter gold PSIGO .370/.580 89g 35”

[ 56 ]
 Lamkin Grips
Dual Density Torsion Control .580 Round Standard: 52g Midsize: +1/16” 64g
Men’s Standard: stock #DTC58R
Mens Midsize: stock #DTCMID
Available in April ‘06

Dual Density Torsion Control Tour Series .580 Round Standard: 52g Midsize: +1/16” 64g
Men’s Standard: stock #DDTS58R
Mens Midsize: stock #DDTSMID
Available in June ‘06
.580 Round Standard: 48g Midsize: +1/16” 61g
Dual Density Crossline
Men’s Standard: stock #CRSLDD
Mens Midsize: stock #CRSLDDMID

.600 Round 44 grams

Crossline Lite
Men’s Standard: stock #CRSLT

.600 Round +1/16” 54 grams

Crossline Lite Midsize
Men’s Midsize: stock #CRSLTMID

.600 Round +1/8” 67 grams

Crossline Lite Jumbo
Men’s Jumbo: stock #CRSLTJ

Crossline All Round Standard: 52g Midsize: .580 +1/16” 63g Jumbo: .580 +1/8” 75g
Men’s Standard .580: stock #CRSL58
Men’s Standard .600: stock #CRSL60
Men’s Midsize: stock #CRSLMID
Men’s Jumbo: stock #CRSLJ
.580 Round 53 grams
Crossline Full Cord
Men’s Standard: stock #CRSLFC

.560 Ribbed -1/32 46 grams

Crossline Lady’s
Lady’s: stock #CRSL56

.580 Round 52 grams

Crossline Black
Men’s Standard: stock #CRSLBL

.580 Round 53 grams

Tour Black Full Cord
Men’s Standard: stock #BTC

.580 Round +1/16” 72 grams

Lamkin Arthritic
Men’s Midsize: stock #ART58R
[ 57 ]
 Lamkin Grips
.580 Round 52 grams
Perma Wrap Classic
Men’s Standard: stock #320CL

.580 Round +1/16” 66 grams

Perma Wrap Classic Midsize
Men’s Midsize: stock #320CLMID

.580 Round +1/8” 80 grams

Perma Wrap Classic Jumbo
Men’s Jumbo: stock #320CLJ

.580 Round -1/32” 44 grams

Perma Wrap Classic Undersize
Lady’s: stock #320LCL

All Round Standard: 52g Oversize: +3/32” 65g Lady’s: -1/32 49g
Perma Wrap
Men’s Standard .580: stock #320G
Men’s Oversize .580: stock #320MID
Lady’s .560: stock #320LBL
.580 Ribbed Standard: 54g
Perma Wrap Cord
Men’s Standard: stock #320FC

Golf Pride Grips

Whisper Black Std: 40g Midsize: +1/16” 53g Jumbo: +1/8” 65g Lady’s: -1/64 45g
Men’s Standard Round: stock #WSP60R
Men’s Midsize: stock #WSPMID
Men’s Jumbo: stock #WSPJ
Lady’s: stock #LWSP58
.580 Round 50 grams
V-55
Men’s Standard Round: stock #V55

.580 Round 53 grams

V-55 Full Cord
Men’s Standard Round: stock #V55FC

*not pictured .670: 34g .865: 26g

Specialty Tour Wrap Models
Taylor Made .670: stock #BUB670*
Big Butt .865 Round: stock #PMW865

Players Sofftie Round Std: .600 53g Midsize: +1/16” .600 65g Lady’s: -1/64” .580 45g
Men’s Standard: stock #PLSOF
Men’s Midsize: stock #PLSOFMID
Lady’s: stock #LPLSOF
[ 58 ]
 Golf Pride Grips
.600 Round 49 grams
Dual Durometer
Men’s Standard Round: stock #DDM60R

.600 Round +1/16” 56 grams

Dual Durometer Midsize
Men’s Midsize: stock #DDMID

.600 Round 38 grams

Dual Durometer Lite
Men’s Standard: stock #DDMLT

.600 Round 50 grams

Dual Durometer Full Cord
Men’s Standard: stock #DDMFC

.580 Round -1/64” 42 grams

Dual Durometer Undersize
Undersize: stock #DDUS58R

.600 Round Standard: 46g Midsize: +1/16” 58g

Decade Multi Compound Cord
Men’s Standard: stock #MCC60R
Men’s Midsize: stock #MCCMID

Tour Wrap Standard: 52g Midsize: +1/16” 60g Lady’s: -1/64” 47g
Men’s .580 Round: stock #PMW58R
Men’s .600 Round: stock #PMW60R
Men’s Midsize: stock #PMWMID
Lady’s stock #LTW56BL

.580 Round 54 grams

Tour Wrap Cord Round
Men’s Standard .580: stock #TWFC

Tour Velvet Std: 51g Midsize: +1/16” 53g Jumbo: +1/8” 61g Lady’s: -1/64” 50g
Men’s .580 Round: stock #VTM58R
Men’s .600 Round: stock #VTM60R
Men’s .580 Ribbed: stock #VTM58
Men’s Midsize: stock #VTMMID
Men’s Jumbo: stock #VTMJ
Lady’s stock #VTL56
.560 Round -1/64” 50 grams
Tour Velvet Ladies Pink
VTL56P

.580 Round 52 grams

Tour Velvet Cord
Men’s Standard Round: stock #VTMFC

[ 59 ]
 Winn Grips
AI: Advanced Integration - Strategically places innovative materials in critical grip areas. This technology precisely positions the
optimum levels of tackiness and feel where they are most needed.
AVS: Advanced Vertical Seam - Allows adhesion of a one-piece polymer sheet to the underlisting, taking grip design, installation
and performance to new levels.
XF: Firm feel., RF: Soft feel.
V17: A proprietary polymer that offers a firm responsive feel while remaining tacky in all weather conditions.
EXCEL: A polymer material that offers comfortable feel, high slip resistance, shock absorption, tackiness, durability and light-
weight benefits.
Tapered XF .600 Standard: 50g Midsize: +1/16” 52g
G7 V17-AVS Black
Men’s Standard: stock #WING7
Men’s Midsize: stock #WING7MID
Tapered XF .600 50 grams
G8 V17-AVS Black
Men’s Standard: stock #WING8BL

Tapered RF .600 50 grams

G8 V17-AVS Navy Blue
Men’s Standard: stock #WING8NB

Tapered XF .600 50 grams

G8 AI V17-AVS Black/Red
Men’s Standard: stock #WG8RB

Tapered XF .600 50 grams

G8 AI V17-AVS Black/Khaki
Men’s Standard: stock #WG8BKH

Tapered XF .600 +1/16” Midsize 52 grams

G8 AI V17-AVS Midsize Black/Blue
Men’s Midsize: stock #WG8MID

Tapered XF .600 +1/8” Jumbo: 58g

G8 AI V17-AVS Jumbo Black/Mahogany
Men’s Jumbo: stock #WG8J

Tapered RF .580 -1/32” 40 grams

G8 AI V17-AVS Lady Black/Purple
Lady’s: stock #LG8BPR

Tapered XF .600 Standard: 50g Midsize: +1/16” 52g

Arrow V17-AVS Grey
Men’s Standard: stock #V17XFGY
Men’s Midsize: stock #V17XFGYMID

Tapered RF .600 50 grams

Arrow V17-AVS Navy Blue
Men’s Standard: stock #V17RFBU

[ 60 ]
 Winn Grips
Tapered XF .600 50 grams
AI Excel-AVS Graphite/Red
Men’s Standard: stock #WEAGRD

Tapered XF .600 50 grams

AI Excel-AVS Graphite/Silver
Men’s Standard: stock #WEAGSI

Tapered RF .580 40 grams

AI Excel-AVS Black/Pink
Lady’s: stock #LWEBPK

Tapered RF .580 40 grams

AI Excel-AVS Black/Champagne
Lady’s: stock #LWEBCH

Parallel .600 Standard: 42g Midsize: +1/32” 43g Jumbo: +1/8” 47g
Excel XF Copper
Men’s Standard: stock #WALCO
Men’s Midsize: stock #WALCOM
Men’s Jumbo: stock #WALCOJ
Parallel .600 Standard: 42g Midsize: +1/32” 43g
Excel XF Black
Men’s Standard: stock #WALBL
Men’s Midsize: stock #WALBLM

Parallel XF .600 50 grams

Excel XF Mahogany
Men’s Standard: stock #WALMG

Tapered XF .600 50 grams

Excel Harmony Black/Grey
Men’s Standard: stock #WALHBGY

Tapered XF .600 Standard: 50g Midsize: +1/32” 52g

Excel Harmony Black/Mahogany
Men’s Standard: stock #WALHBM
Men’s Midsize: stock #WEHB MID

Classic RF Black Parallel Standard: 42g Midsize: +1/32 43g Jumbo: +1/8 47g Lady’s: -1/32 39g
Men’s Standard: stock #WRFBL
Men’s Midsize: stock #WRMIDBL
Men’s Jumbo: stock #WRFBLO
Lady’s: stock #LWINBL
Parallel RF .600 42 grams
Classic RF Tan
Men’s Standard: stock #WRFTN

[ 61 ]
 Avon Grips
Ribbed Standard: .580 51g Jumbo: .600 +3/32” 64g
Brown Chamois
Men’s Standard: stock #MCH
Men’s Jumbo: stock #JCH

Ribbed Std: .580 51g Jumbo: .600 64g Lady’s: .560 -1/32” 42g
Black Chamois
Men’s Standard: stock #MCHBL
Men’s Jumbo: stock #JCHBL
Lady’s Black: stock #LCHBL
.580 Round 53 grams
Chamois II Black
Men’s standard: stock #MCH2BL

.600 Round 53 grams

Chamois Wrap
Men’s Standard: stock #ACHW

Ribbed Standard: .580 53g Midsize: .600 61g

Nexus Tour
Men’s Standard: stock #NEXTD
Men’s Midsize: stock #NEXMID

Taci Mac Grips

Round Std: .580 51g Midsize: .600 +3/32” 58g Lady’s: .560 -1/32” 41g
Perforated Wrap
Men’s Standard: stock #MBK105P
Men’s Midsize: stock #MBK107P
Lady’s: stock #MBK102
.580 Round 53 grams
Black Knurled
Men’s Standard: stock #MBK101

.600 Round +3/32” 70 grams

Arthritic
Men’s Jumbo: stock #ST271

Kelmac Grips
.590 Round 60 grams
White Line
Men’s Standard: stock #KELWH

.580 Round 48 grams

Kelmac Wrap
Men’s Standard: stock #KWRAP

.580 Round 49 grams

Ruff Wrap
Men’s Standard: stock #KRW58

[ 62 ]
 Winn Putter Grips
Gold Pistol: A thinner more pronounced pistol shape.
Medallist Pistol: A traditional pistol shape.
Medalist Pistol Excel-AVS USA .580
stock #WINPTUSA 59 grams

Medalist Pistol Excel-AVS

.580
Red/Silver
61 grams
stock #WALPTRD

Medalist Pistol Excel-AVS Navy/Silver .580

stock #WALPTBU 61 grams

Medalist Pistol AI Excel-AVS Bk/Orange .580

stock #WEPTBO 58 grams

Medalist Pistol V17-AVS Dark Gray .580

stock #V17PTCC 61 grams

Midsize Pistol V17-AVS Maroon .580

stock #V17PTMID 78 grams

Jumbo Paddle V17-AVS Navy .580

stock #V17PTJ 81 grams

Original Pistol Excel Wrap Black

59 grams
Standard Size stock #WINPTBL
89 grams
Jumbo stock #WPTOSBL

Original Pistol Excel Wrap Copper

61 grams
stock #WINPTCO

Midsize Pistol Excel-AVS Graph/Red .580

stock #WALPTMID 78 grams

Midsize Pistol AI Excel-AVS Black/Blue .580

stock #WEPTMID 78 grams

Gold V17-AVS Black/Gold .580

stock #WGPTBL 62 grams

Gold Excel-AVS Gold .580

stock #WGPTGO 62 grams

Gold Pistol AI Excel-AVS Black/Graphite .580

stock #WGPTBGY 59 grams

V17-AVS Y2K Paddle .580

stock #WPTY2K 57 grams

Winn Medalist Blue .580

stock #WINPTMBU 57 grams
Limited inventory - No back orders

[ 63 ]
 Golf Pride Putter Grips
Dual Durometer
62 grams
stock #DDMPT

Decade Putter Blue

72 grams
stock #DCPTBU

Decade Putter Red

72 grams
stock #DCPTRD

Full Cord Putter

64 grams
stock #TWPFC

Tour Velvet Putter

65 grams
stock #VTMPT

Pro Only
52 grams
stock #PO58

Players Sofftie
64 grams
stock #PLSOFPT

Jumbo Crown
140 grams
stock #JCP58

Whisper Black
69 grams
stock #WSPPT

Whisper Saddle
stock #WSPSDPT
69 grams
Limited inventory -
No back orders

Whisper Tour Shape

stock #WSPTSPT
69 grams
Limited inventory -
No back orders

[ 64 ]
 Lamkin Putter Grips
Lamkin Perma Wrap .580
stock #320PT 70 grams

Lamkin Cross Line .580

stock #CRSLPT 60 grams

Lamkin Jumbo .580

stock #LAMJ 116 grams

Lamkin Deep Etched Paddle .580

stock #LEPT 80 grams

Lamkin Dual Density Crossline .580

stock #CRDPT 63 grams

Lamkin Dual Density Torsion Control .580

stock #DTCPT 58 grams

Belly Putter Grips

Winn 21”
155 grams
stock #WINLONG

Winn Two Piece

132 grams
stock #W2PT

Winn Thin Two Piece

107 grams
stock #SKIN2WIN

LAMKIN TRAINING Grips

Training Grips
88 grams
Mens stock #MTRAINER
77 grams
Ladies/Junior stock #LJTRAINER

[ 65 ]
 Leather Available in: stock #
#1, #3 and #5 individual pcs LHC
only

Knit Covers avail. in: HC

#1, #3, #5 and #X individual
pcs or sets #1, #3 and #5 HCSET

Black Grey Green Red Black Blue

leather knit knit knit knit knit

Black USA fur cover Black fur cover Red/Black fur cover Gray fur cover

for use for use for use for use

up to up to up to up to
460cc 460cc 460cc 460cc

stock # stock # stock # stock #

BFCUSA BFCBL BFCRB BFCGY

Hybrid Headcover
stock #HHC

Loft tag
stock #HTAG

Zipper Headcover
for oversize drivers Putter Cover
(up to 600cc) stock #HCPUT
for use with:
3 Ball Blade True Balance
stock # 1 Ball 3 Ball Double Hump
530HC Tags available in: most mallet styles
15o, 18o, 21o, 21o.370, 24o, 27o, 30o, 34o

[ 66 ]
 Club Assembly Manual
The Simple Guide to Building stock #MANUAL
Great Golf Clubs Grip Kit
Perfect for the beginning club
stock #GRIPKIT
builder. This 28p b/w manual guides
Includes the supplies necessary for
the reader step-by-step through the
approximately 14 clubs: 4oz solvent
assembly process. Also included is
bottle, 2” x 4 yard grip tape, clamp
information about shaft prepping,
and a how-to CD ROM video.
countersinking and custom fitting.

24 Hour Shafting Epoxy

Pint stock #BSE1 2” Grip Tape
1/2 Pint stock #BSE5 2” x 36 yard stock #GT2
2 part 50/50 mix. Work time about 60 minutes. 2” x 4 yard stock #SGT2
Cures overnight. This is the preferred epoxy of The preferred tape of our assembly
our assembly department and has the highest department.
dependability rating of any shafting epoxy.

1/2 Pint 20 Minute Shafting Epoxy

stock #E20
3/4” Grip Tape
2 part 50/50 mix. Work time about 5
3/4” x 36 yard stock #GT34
minutes. Cures in about 20 minutes
3/4” x 10 yard stock #SGT34
(slightly slower cure time in cold or
humid conditions). Better than Conap!

1/2 Pint 10 Minute Shafting Epoxy

stock #E10 Grip Clamp
2 part 50/50 mix. Work time about 2 stock # CLAMP
minutes. Cures in about 10 minutes not recommended for use with
(slightly slower cure time in cold or ultralight graphite shafts.
humid conditions). Better than Conap!

20 Minute Syringe Shafting Epoxy

stock #QE20 1 Gallon Grip Solvent
2 part 50/50 mix. Work time about 5 stock #GSG
minutes. Cures in about 20 minutes The preferred solvent of our assembly
(slightly slower cure time in cold or department.
humid conditions). Better than Conap!

10 Minute Syringe Shafting Epoxy

stock #QE10 1 Quart Grip Solvent
2 part 50/50 mix. Work time about 2 stock #QSOL
minutes. Cures in about 10 minutes The preferred solvent of our assembly
(slightly slower cure time in cold or department.
humid conditions). Better than Conap!

24 Hour Shafting Epoxy Pack 8oz/4oz Grip Solvent

stock #EPACK 8oz stock #GS8OZ
Enough to do 1-5 clubs per pack. 4oz stock #GS4OZ

[ 67 ]
 Hosel Brush
stock #BRUSH Lead Tape
Perfect for removing unwanted
debris from the inside of a hosel. 1/2” x 100” roll stock #LS
Works with irons and woods.

Easy Out
Iron Easy Out stock #EASYI Lead Powder
Wood Easy Out stock #EASYW 1 pound stock #LP
Great for removing steel shaft frag- For use with shaft corks for fine tun-
ments that have broken off inside of ing swing weights.
a hosel.

Countersink Bit
Shaft Corks
stock #CS
pkg of 25 for irons stock #CI
To cone the top of a hosel to prepare
pkg of 25 for woods stock #CO
the head for use with graphite shafts.

Drill Bits Blue Away

6” 1/8” Bit stock #BIT18 stock # BLAW
Iron “T” Bit stock #BITT Removes burn marks from hosels
11/32” Bit stock #BIT1132 that have been scarred due to heating
5/16” Bit stock #BIT516 during shaft removal.

Naval Jelly
Graphite Shaft Extenders
stock #NAVJ
Ultralite Version stock #GSEUL
Removes corrosion and surface rust
Standard Version stock #GSE
from metallic surfaces.

4” Cut Off Wheel and Mandrel

4” Wheel stock #COW4
Steel Shaft Extenders
Mandrel stock #MANDREL
.580 Butt stock #SSE58
For use in a standard drill, this assem-
.600 Butt stock #SSE60
bly makes cutting shafts affordably easy.
Wheel and mandrel sold separately.

Bore Thru Plug

for steel shafts stock #PLUGST 6” Cut Off Wheel
for graphite shafts stock #PLUGGR stock #COW6
To plug the bottom of a shaft that Great for cutting shafts for use with a
penetrates the sole plate on bore-thru 1/2” bench grinder.
type club heads.

Face Tape for Irons/Woods

iron stock #FACETI 48” Assembly Ruler
wood stock #FACETW stock #RULER
5 count strip. A must for any club builder.

Scorpion Spikes Bamboo Tees

Large Thread stock #SCORPL 3.25” 25 pack stock #T325
Small Thread stock #SCORPS 3.25” 100 pack stock #T3100
QLok Thread stock #SCORPQ 2.75” 25 pack stock #TLONG25
TriLok Thread stock #SCORPT 2.75” 100 pack stock #TLONG100

24 Hour Hand Warmer Pocket Hand Warmer

shake them up to activate. Uses lighter fluid.
Stays warm for a full 24 hours.
Great for chilly spring, fall, and stock #HWPK
winter mornings. Stock #HW24.
[ 68 ] Longest lasting warmer available!
 Ferrules for woods/irons

9/16” silver/gray/black 9/16”clear/black 9/16” copper/black 3/8” copper/black 9/16” white/black

iron stock # FBSGI iron stock # FCBI iron stock # FCOBI iron stock # FCOBIS iron stock # FWBI
wood stock # FBSGW wood stock # FCBW wood stock # FCOBW wood stock # FCOBWS wood stock # FWBW

9/16” gold/black 3/8” gold/black 9/16” black 3/8” black 9/16” red/black
iron stock # FMBGI iron stock # FMBGIS iron stock # FMBI iron stock # FMBIS iron stock # FRBRI
wood stock # FMBGW wood stock # FMBGWS wood stock # FMB wood stock # FMBS wood stock # FRBRW

Inserts and Special ferrules

insert ring insert ferrule .350 wood insert ring hosel ring .350 hosel ring .350 wood ferrule .350 converter
iron stock # HCIRI iron stock # INSFI wood stock # iron stock # LHRI wood stock # wood stock # stock #
wood stock # HCIR2 wood stock # INSFW HCIR3 wood stock # LHRW LHRW350 FMBS350 350CON
.350 converters are not compatible with Trident heads

Note that most of our Trident heads require our patented hosel collar insert system. The
use of this insert eliminates the need to countersink the head for use with a graphite shaft.
However, only heads that have been specially counterbored to accept the insert can be used
with the insert. To assemble with the insert, follow these instructions: 1) Spread a thin
coat of epoxy throughout the inner diameter of the hosel (including the region where the
insert will fit. 2) Slide the insert into position. 3) Put a thin coat of epoxy on the tip of the
Insert Ring Insert Ferrule shaft. 4) Insert the shaft while rotating to ensure consistent epoxy coverage.
Wood Insert stock#hcir2 Iron Insert stock#hciri US Patent 5,452,890

Wood Insert Ferrule stock#insfw Iron Insert Ferrule stock#insfi .350 Insert stock#hcir3

Specialty Weight Screws

Weight screws for use with the 410 Trident SS Ti

3 gram screw 5 gram screw 9 gram screw 11 gram screw 17 gram screw 22 gram screw
stock#screw3 stock#screw5 stock#screw9 stock#screw11 stock#screw17 stock#screw22

Weight screws for the Trident TS-10 450 and TS-10 Fairway woods Weight screws for the Trident RD Hybrid

7.5g stock #HYSC75

14g stock #HYSC14
18g stock #HYSC18
20g stock #HYSC20
TS-10 Ti 2g TS-10 Ti 4g TS-10 Ti 6g TS-10 Ti 8g TS-10 Ti 10g 22g stock #HYSC22
stock#tscrew2 stock#tscrew4 stock#tscrew6 stock#tscrew8 stock#tscrew10 24g stock #HYSC24

[ 69 ]
 Precision Golf Tools

The best, easiest to use

caliper we’ve ever tested.
Digital readout for inches no more burn marks!
and mm’s!!

6” Digital Caliper Heat Gun

stock #DIGCAL stock #HEATGUN
Accurate to .001”! Switch from mm/in with the push of a button. Comes with a 1500 Watt. Two heat settings (630o, 1000o F). A
case and extra battery. Measure ID, OD, tip/butt, etc. Hundreds of golf and non- perfect way to heat a hosel for shaft removal.
golf measuring applications with digital readout!

Drill Bit Set (29pc set) 4-Speed Rotary Tool Kit

stock #BITSET stock #4ROTKIT
Full index from 1/64” to 1/2”. Heat A terrific addition to any club building workshop! Adjustable 4 speed (6500, 10700, 14000 and
treated with a black oxide finish. Self 22000 RPM). Includes a 30pc accessory kit and carrying case. Great for cutting, grinding, de-
centering split point design prevents burring, sharpening and polishing.
skating. Includes metal index.

stone bit for fine

sanding or prepping!

3” Multi Purpose Bench Grinder 3” Cut Off Wheels (10 Pack)

stock #GRIND3 stock #COW3
Great for cutting and prepping steel or graphite Cut Off Wheels for use with our 3” Multi Purpose
shafts! Comes with a “Flex Shaft” with a mounted Bench Grinder.
stone bit capable of 10K RPM for fine sanding. Ideal
for small shop operations. Extra shipping charge applies.

Pro Swing, Inc 330 Grandview Ave Wadsworth, OH 44281 1.800.451.1995

[ 70 ]
www.proswing.com
THE SPEED STIK is an amazing golf training aid that will empower you to hit the ball farther by
increasing the speed of your swing. FASTER = FARTHER. The faster you swing the club, the farther
you will hit the ball.
RED SPEED STIK is for golfers over 175 lbs. Weight: 24 oz.
BLUE SPEED STIK is for golfers under 175 lbs. Weight: 19 oz.
It comes with an instructional CD rom. Every time you work out with THE SPEED STIK you will
1. Increase strength of golf specific muscles.
2. Improve flexibility and increase range of motion.
3. Improve your sense of balance.
4. Improve your technique.
5. Increase your swing speed !
“Since I started swinging The Speed Stik, my swing speed has increased by 10 miles per hour. I am hitting the
ball farther and straighter, and because of this my scoring average has improved on the tour. I know that The
Speed Stik will do the same for your game as well.” Vijay Singh testimony taken from “The Speed Stik” brochure

Stretching Pole

Flexibility is perhaps the most important aspect in making a correct and full body swing. The
exercises included with the stretching pole will help you achieve this goal. Just 10 minutes a day
will dramatically improve your game. The stretching pole has adjustable length for any height or
type of exercise

Tournament Golf Watches

Magnet closure

Clips onto your golf bag!

This new watch has a quartz movement, glow in-the-dark face and multi movement function.
The unique magnetic clip allows attachment to a belt, golf bag, golf cart, etc... This new watch
is one of the best looking and functional time pieces available on the market.

[ 71 ]
 Table of Contents
Page 2 - Trident Tri-Screw Titanium Page 37 - Fireball Irons
Trident TS-10 Steel Fairway Woods Page 38 - Accura AG / Trident HP Irons
Page 3 - Trident TP7 Dual Screw Irons Page 39 - Miracle Wedge Oversize
Page 4 - Trident WB-40 Titanium Page 40 - Accura Diamond Face / Acclaim Wedges
Page 5 - Trident XF-20 Titanium Page 41 - KB IV Tour Spin Wedges
Trident XF-20 Steel Fairway Woods Page 42 - Putter Heads
Page 6 - Trident RD Hybrid Page 43 - Putter Heads
Page 7 - Trident DSW Dual Screw Hybrid Page 44 - Trident Graphite Shafts
Page 8 - Trident 460 VTT Titanium Page 45 - Trident Graphite Shafts
Page 9 - Trident VTT Steel Woods Page 46 - Trident/Dynapower/Bubble Graphite
Page 10- Trident SS Irons Page 47 - True Temper Steel Shafts
Page 11 - Trident 530cc Titanium Page 48 - True Temper Advertisement
Page 12 - Trident RD Titanium Page 49 - True Temper Steel Shafts
Trident RD Steel Fairway Woods Page 50 - Apollo/Precision Steel Shafts
Page 13 - Trident RD Irons Page 51 - Grafalloy Graphite Shafts
Page 14 - Trident SS 410cc Titanium Page 52 - UST Graphite Shafts
Page 15 - Trident SS Steel Plus Woods Page 53 - UST Graphite Shafts
Page 16 - Trident Elite Plus Irons Page 54 - Aldila Graphite Shafts
Page 17 - Trident Injector II Irons Page 55 - Penley Graphite Shafts
Page 18 - Heathway Titanium Page 56 - Accuflex Graphite
Heathway Steel Fairway Woods Putter Shafts
Page 19 - Heathway Irons Page 57 - Lamkin Grips
Page 20 - KB XD Titanium Page 58 - Lamkin/Golf Pride Grips
Page 21 - KB XD Irons Page 59 - Golf Pride Grips
Page 22 - KB Tour Blade Irons Page 60 - Winn Grips
Page 23 - M40 Irons Page 61 - Winn Grips
Page 24 - SQS Titanium Page 62 - Avon/Tacki-Mac/Kelmac Grips
Page 25 - Hot Shot Titanium Page 63 - Winn Putter Grips
Page 26 - Hot Shot Irons Page 64 - Golf Pride Putter Grips
Page 27 - X-Factor Irons Page 65 - Lamkin/Winn Belly Putter Grips
Page 28 - Crown Regal 460cc Offset Titanium Lamkin Training Grips
Page 29 - Crown Regal 460cc Straight Hosel Ti Page 66 - Headcovers
Page 30 - Crown Regal 450 Steel Woods Page 67 - Epoxy/Grip Tape/Grip Solvent
Page 31 - Crown Regal Brass Back Woods Page 68 - Club Building Supplies
Page 32 - Crown Regal 5 Irons Page 69 - Ferrules/Inserts/Weight Screws
Page 33 - Crown Regal II Irons Page 70 - Club Building Tools
Page 34 - DDI - E and K Model Titanium Page 71 - The Speed Stik
Page 35 - Widebody IV / Excell Thin Lie Stretching Pole
Page 36 - Fireball Titanium Tournament Golf Watches
Pro Swing, Inc
1.800.451.1995 330 Grandview Ave 1.330.334.0806
Order Line Wadsworth, OH 44281 Tech Line
www.proswing.com