MASON INDUSTRIES, Inc.

PIPE, PIPE FITTINGS

Manufacturers of Vibration Control Products
350 Rabro Drive 2101 W. Crescent Ave., Suite D
AND ACCESSORY PIPE
DATA
Hauppauge, NY 11788 Anaheim, CA 92801 WEIGHTS, AND
631/348-0282 714/535-2727
FAX 631/348-0279 FAX 714/535-5738
THERMAL
[email protected] • www.Mason-Ind.com EXPANSION DATA SHEET DS-500-1.1

BRITISH UNITS (see back page for Metric Units)

HANGER SELECTION
When selecting pipe hangers or supports, allowances must be made for Pipe Fittings or Accessories such as valves, strainers, etc. Larger
capacities must be used in these locations. Approximate piping component weights are given in Pipe Fitting and Accessory Weight table.
WATER PIPE WEIGHTS (FIBERGLASS INSULATION)
Max Insul
Pipe Hanger Pipe Thick- Weight per Foot (lbs) WEIGHT per LENGTH (lbs)
Size Spacing Sched- ness Pipe Insu-
(in) (ft) ule (in) Only Water lation Total 6’ 8’ 10’ 12’ 14’ 16’ 18’ 20’ 22’ 24’ 26’ 28’ 30’ 32’
1 7 40 1 1.7 0.4 0.3 2.4 14 19 24
11/4 7 40 1 2.3 0.7 0.3 3.3 20 26 33
11/2 9 40 1 2.7 0.9 0.4 4.0 24 32 40
2 10 40 1 3.7 1.5 0.4 5.6 34 45 56
21/2 11 40 1 5.8 2.1 0.5 8.4 50 67 84 101
3 12 40 1 7.6 3.2 0.6 11.4 91 114 137
4 14 40 1 11.0 5.2 0.7 16.9 135 169 203 237
5 16 40 11/2 15.0 8.7 1.4 25.1 201 251 301 351 402
6 17 40 11/2 19.0 12.4 1.6 33.0 264 330 396 462 528 594
8 19 1
40 1 /2 29.0 22.0 2.0 53.0 424 530 636 742 848 954 1060
10 22 40 11/2 41.0 34.0 2.4 77.4 619 774 929 1084 1238 1393 1548 1703
12 23 40 11/2 54.0 49.0 3.0 106.0 848 1060 1272 1484 1696 1908 2120 2332 2544
14 25 30 11/2 55.0 60.0 3.0 118.0 1180 1416 1652 1888 2124 2360 2596 2832 3068
16 27 30 11/2 63.0 79.0 3.0 145.0 1450 1740 2030 2320 2610 2900 3190 3480 3770 4060
18 28 30 11/2 82.0 100.0 4.0 186.0 1860 2232 2604 2976 3348 3720 4092 4464 4836 5208
20 30 20 11/2 79.0 126.0 4.0 209.0 2090 2508 2926 3344 3762 4180 4598 5016 5434 5852 6270
24 32 20 11/2 95.0 184.0 5.0 284.0 2840 3408 3976 4544 5112 5680 6248 6816 7384 7952 8520 9088

STEAM PIPE WEIGHTS (FIBERGLASS INSULATION)

Max Insul Weight per Foot (lbs) WEIGHT per LENGTH (lbs)
Pipe Hanger Pipe Thick-
Size Spacing Sched- ness Pipe Insu-
(in) (ft) ule (in) Only lation Total 6’ 8’ 10’ 12’ 14’ 16’ 18’ 20’ 22’ 24’ 26’ 28’ 30’ 32’
1 7 40 21/2 1.7 1.2 2.9 17 23 29
11/4 7 40 21/2 2.3 1.3 3.6 22 29 36
11/2 9 40 21/2 2.7 1.4 4.1 25 33 41
2 10 40 21/2 3.7 1.6 5.3 32 42 53
21/2 11 40 3 5.8 2.3 8.1 49 65 81 97
3 12 40 3 7.6 2.5 10.1 81 101 121
4 14 40 3 11.0 2.9 13.9 111 139 167 195
5 16 40 31/2 15.0 4.1 19.1 153 191 229 267 306
6 17 40 31/2 19.0 4.6 23.6 189 236 283 330 378 425
8 19 40 31/2 29.0 5.5 34.5 276 345 414 483 552 621 690
10 22 40 31/2 41.0 6.4 47.4 379 474 569 664 758 853 948 1043
12 23 40 31/2 54.0 7.3 61.3 490 613 736 858 981 1103 1226 1349 1471
14 25 30 31/2 55.0 7.9 62.9 629 755 881 1006 1132 1258 1384 1510 1635
16 27 30 31/2 63.0 8.8 71.8 718 862 1005 1149 1292 1436 1580 1723 1867 2010
18 28 30 31/2 82.0 9.7 91.7 917 1100 1284 1467 1651 1834 2017 2201 2384 2568
20 30 20 31/2 79.0 10.6 89.6 896 1075 1254 1434 1613 1792 1971 2150 2330 2509 2688
24 32 20 31/2 95.0 13.0 108.0 1080 1296 1512 1728 1944 2160 2376 2592 2808 3024 3240 3456

FLANGED 125lb CAST IRON PIPE FITTINGS THERMAL EXPANSION OF PIPE MATERIALS SATURATED
AND ACCESSORY WEIGHTS (approximate) (inches per 100 ft. from 70°F) STEAM TEMP.
ACCESSORIES FITTINGS Carbon, Carbon- Austenitic Pressure Deg
Deg moly & Low Stainless Steels (psi) F
Bonnet Bonnet F Chrome Steel (304, 316, 347) Copper PVC
Pipe Check Gate Pipe 0 212
Size Strainer Valve Valve Size Elbows Tee Flange -50 -0.87 -1.34 -1.32 -4.00 25 267
(in) (lbs) (lbs) (lbs) (in) (lbs) (lbs) (lbs) 0 -0.51 -0.78 -0.79 -2.33 50 298
11/2 20 25 30 11/2 15 20 3.5 50 -0.15 -0.22 -0.22 -0.67 75 320
2 30 25 40 2 20 25 6 70 0.00 0.00 0.00 0.00 100 338
21/2 40 35 50 21/2 25 35 8 100 0.23 0.34 0.34 1.00 125 353
3 50 45 70 3 30 40 9 150 0.61 0.90 0.91 2.67 150 366
4 85 80 110 4 55 70 16 200 0.99 1.46 1.51 —ll 175 378
5 110 120 140 5 70 90 20 250 1.40 2.03 2.08 —ll 200 388
6 140 155 175 6 90 115 25 300 1.82 2.61 2.67 —ll 225 397
8 205 305 250 8 120 175 34 350 2.26 3.21 3.27 —ll 250 406
10 330 455 475 10 245 295 53 400 2.70 3.80 3.88 —ll 275 414
12 440 675 690 12 375 405 71 450 3.16 4.40 4.49 —ll 300 421
14 615 885 930 14 495 565 93 500 3.62 5.01 5.12 —ll
16 875 1170 1255 16 700 750 120 550 4.11 5.62 5.74 —ll
18 1075 1375 1650 18 890 925 140 600 4.60 6.24 6.39 —ll
20 1380 1780 1950 20 1140 1180 176 Inches per 100 Ft. per 100°F in Temperature Range 50-350°F:
24 2150 2960 3065 24 1720 1850 255
Carbon, Carbon-moly, Low Chrome Steel: 0.80”
250 lb. Fittings can be established at approximately 1.8 times Austenitic Stainless Steels (304, 316, 347): 1.14”
weights shown. Copper: 1.16”
PVC (varies with type) 3.40”
PIPE DATA DS-500-1.1 MASON INDUSTRIES

METRIC UNITS (see front page for British Units)

HANGER SELECTION
When selecting pipe hangers or supports, allowances must be made for Pipe Fittings or Accessories such as valves, strainers, etc. Larger
capacities must be used in these locations. Approximate piping component weights are given in Pipe Fitting and Accessory Weight table.

WATER PIPE WEIGHTS (FIBERGLASS INSULATION)

Max Insul Weight per Meter (kgs) WEIGHT per LENGTH (kgs)
Pipe Hanger Pipe Thick-
Size Spacing Sched- ness Pipe Insu-
(in) (M) ule (mm) Only Water lation Total 2M 2.5M 3M 3.5M 4M 4.5M 5M 6M 7M 8M 9M 10M
1 2.1 40 25 2.5 0.6 0.5 3.6 7 7
11/4 2.1 40 25 3.4 1.0 0.5 4.9 10 10
11/2 2.7 40 25 4.0 1.3 0.7 6.0 12 15 18
2 3.0 40 25 5.5 2.2 0.6 8.3 17 21 25 29
21/2 3.4 40 25 8.6 3.1 0.8 12.5 25 31 38 44
3 3.7 40 25 11.3 4.8 0.9 17.0 34 42 51 59 68
4 4.3 40 25 16.4 7.7 1.1 25.2 50 63 75 88 101 113
5 4.9 40 38 22.3 12.9 2.2 37.4 75 93 112 131 149 168 187
6 5.2 40 38 28.3 18.4 2.4 49.1 98 123 147 172 196 221 246 295
8 5.8 40 38 43.1 32.7 3.1 78.9 158 197 237 276 316 355 394 473
10 6.7 40 38 61.0 50.6 3.6 115.2 230 288 346 403 461 518 576 691 806
12 7.0 40 38 80.3 72.9 4.6 157.8 316 394 473 552 631 710 789 947 1104
1262

14 7.6 30 38 81.8 89.3 4.5 175.6 351 439 527 615 702 790 878 1054 1229 1405

16 8.2 30 38 93.7 117.5 4.6 215.8 432 539 647 755 863 971 1079 1295 1511 1726 1942

18 8.5 30 38 122.0 148.8 6.0 276.8 554 692 830 969 1107 1246 1384 1661 1938 2215 2491

20 9.1 20 38 117.5 187.5 6.0 311.0 622 778 933 1089 1244 1400 1555 1866 2177 2488 2799 3110

24 9.8 20 38 141.3 273.8 7.6 422.7 845 1057 1268 1479 1691 1902 2113 2536 2959 3381 3804 4227

STEAM PIPE WEIGHTS (FIBERGLASS INSULATION)

Max Insul Weight per Meter (kgs) WEIGHT per LENGTH (kgs)
Pipe Hanger Pipe Thick-
Size Spacing Sched- ness Pipe Insu-
(in) (M) ule (mm) Only lation Total 2M 2.5M 3M 3.5M 4M 4.5M 5M 6M 7M 8M 9M 10M
1 2.1 40 38 2.5 1.8 4.3 4 7 9 11
11/4 2.1 40 38 3.4 2.2 5.4 6 9 11 13
11/2 2.7 40 38 4.0 2.7 6.1 7 11 12 15 18
2 3.0 40 38 5.5 3.0 7.9 9 13 16 20 24 28
2 /2
1 3.4 40 38 8.6 3.4 12.1 12 18 24 30 36 42
3 3.7 40 38 11.3 3.1 15.0 22 30 38 45 53 60
4 4.3 40 38 16.4 4.2 20.7 31 41 52 62 72 83 93
5 4.9 40 38 22.3 4.5 28.4 40 57 71 85 99 114 128 142
6 5.2 40 50 28.3 6.8 35.1 53 70 88 105 123 140 158 176 211
8 5.8 40 50 43.1 8.3 51.3 77 103 128 154 180 205 231 257 308
10 6.7 40 50 61.0 10.6 70.5 107 141 176 212 247 282 317 353 423 494
12 7.0 40 50 80.3 12.1 91.2 139 182 228 274 319 365 411 456 547 639 730
14 7.6 30 50 81.8 12.5 93.6 187 234 281 328 374 421 468 562 655 749
16 8.2 30 50 93.7 13.8 106.9 214 267 321 374 427 481 534 641 748 855 962
18 8.5 30 50 122.0 15.5 136.5 273 341 409 478 546 614 682 819 955 1092 1228
20 9.1 20 50 117.5 17.3 133.3 267 333 400 467 533 600 667 800 933 1067 1200 1333
24 9.8 20 50 141.3 19.9 160.7 321 402 482 563 643 723 804 964 1125
1286 1447 1607

FLANGED 125lb CAST IRON PIPE FITTINGS THERMAL EXPANSION OF PIPE MATERIALS SATURATED
AND ACCESSORY WEIGHTS (approximate) (cm per 30m from 21°C) STEAM TEMP.
ACCESSORIES FITTINGS Carbon, Carbon- Austenitic Pressure Deg
Deg moly & Low Stainless Steels (kg/cm2) C
Bonnet Bonnet C Chrome Steel (304, 316, 347) Copper PVC
Pipe Check Gate Pipe Pipe 0 100
Size Strainer Valve Valve Size Elbows Tee Flange -46 -2.35 -3.58 -3.38 -10.13 1.7 131
(in) (kgs) (kgs) (kgs) (in) (kgs) (kgs) (kgs) -18 -1.37 -2.08 -1.97 -5.90 3.4 148
10 0.39 0.59 0.55 1.66 5.2 160
11/2 9 11 14 11/2 7 9 2 6.9 170
2 14 11 18 2 9 11 3 21 0.00 0.00 0.00 0.00
38 0.60 0.91 0.86 2.57 8.6 178
21/2 18 16 23 21/2 11 16 4 10.3 186
3 23 20 32 3 14 18 4 66 1.58 2.40 2.27 6.80
93 2.53 3.84 3.63 —ll 12.1 192
4 39 36 50 4 25 32 7 13.8 198
5 50 54 63 5 32 41 9 121 3.51 5.34 5.04 —ll
149 4.49 6.84 6.45 —ll 15.5 203
6 63 70 79 6 41 52 11 17.2 208
8 93 138 113 8 54 79 15 177 5.48 8.33 7.86 —ll
204 6.42 9.77 9.22 —ll 19.0 212
10 149 206 215 10 111 134 24 20.7 216
12 199 306 312 12 170 183 32 232 7.41 11.27 10.63 —ll
14 278 401 421 14 224 256 42 260 8.39 12.76 12.05 —ll
16 396 530 568 16 317 339 54 288 9.37 14.26 13.46 —ll
18 487 622 747 18 403 419 63 316 10.35 15.75 14.87 —ll
20 625 806 883 20 516 534 80 cm per 30m per °C in Temperature Range 10 – 177°C:
24 973 1340 1387 24 779 837 115
Carbon, Carbon-moly, Low Chrome Steel: 0.0351
250 lb. Fittings can be established at approximately 1.8 times Austenitic Stainless Steels (304, 316, 347): 0.0534
weights shown. Copper: 0.0504
PVC (varies with type) 0.1512
Wu1006
12/10