Compact cylinder double acting/single rod

SSD2 Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2
Item
SSD2-L (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
+2.0
Stroke With rubber cushion 0

SSG tolerance mm Without cushion +1.0

0

Working piston speed mm/s 50 to 500 50 to 300

SSD Cushion With or without cushion can be selected
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
CAT Allowable absorbed With rubber cushion 0.03 0.05 0.10 0.16 0.16 0.44 0.75 0.78 2.51 3.92
energy J Without cushion 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
MDC2 *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MVC Stroke length Min. stroke length with switch (2 switches)

Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
SMG (mm) length (mm) length (mm) length (mm) (mm)
ø12 5/10/15/20 ø12
MSD/ 30 10(5)
MSDG ø16 25/30 ø16
ø20 5/10/15/20/25 ø20
FC* 50
ø25 30/35/40/45/50 ø25
ø32 5/10/15/20/25/30/ ø32
STK 1 5
ø40 35/40/45/50/75/100 ø40
5
ø50 ø50
SRL3 10/15/20/25 100
ø63 ø63
30/35/40/45/50
SRG3 ø80 ø80
75/100
ø100 ø100
SRM3 *1 : When using the type with switch, refer to the table of the min. stroke length with switch. *1 : Less than 10 mm with the 2-color display, off-delay, AC magnetic field
*2 : If the stroke exceeds the max. stroke length, refer to the long proof, T1* or T8* switch is not available.
stroke length on page 792. *2 : Values in ( ) are for the type with 1 on rod side.
SRT3 *3 : Refer to pages 763 and 765 for the min. stroke length with
mounting bracket LB.
MRL2 Custom stroke length
MRG2 ● SSD2 Series
Standard products Optional products
Item A + stroke length
SM‑25 Standard stroke length body with spacer Dedicated unit (-S)
B + stroke length
Model No. Refer to How to order. Add “-S” option code to the model No.
ShkAbs A spacer is added to the standard stroke length Dedicated units of the required stroke
Description
body to adjust the stroke length in 1 mm increments. length are available.
FJ Bore size Stroke range Bore size Stroke range
12/16 1 to 29 12, 16 6 to 29
FK Stroke range
20 to 25 1 to 49 20, 25 6 to 49
Spd 32 to 100 1 to 99 32 to 100 11 to 99
Contr Model No.: SSD2-32-38 Model No.: SSD2-32-41-S
Example of
A +2 mm spacer is added to the SSD2-32-40 standard cylinder Dedicated units for 41 mm stroke length are available.
Ending model No.
to create 38 mm stroke length. B + stroke length is 63 mm. B + stroke length is 64 mm.

752
 SSD2 Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Applications
Dedicated for For programmable Dedicated for For programmable CMA2
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCM
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green
SCG
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) (Lit when ON)
SCA2
Leakage current 1mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29
SCS2
Switch specifications (T switch)
● 1-color/2-color display/for AC magnetic field proof
CKV2
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4) CAV2/
T1H/T1V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT COVP/N2
For programmable controller, Dedicated for programmable For programmable For programmable For programmable controller, relay, IC circuit For programmable For programmable
Applications
relay, compact solenoid valve controller controller, relay controller, relay (no indicator lamp), serial connection controller, relay controller
SSD2
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10% SSG
Load current 5 to 100 mA 5 to 20 mA (*3) 100mA or less 50mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
Red/green Red/green Yellow Red/green Red/green Red/green
Indicator LED LED
LED LED
LED
LED LED LED
LED Without indicator LED
LED SSD
lamp (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) lamp (Lit when ON)
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
≤ 1 mA at 100 VAC,
Leakage current
≤ 2 mA at 200 VAC
1 mA or less 10 μA or less 0 mA 1 mA or less CAT
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 MDC2
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. MVC
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SMG
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire. MSD/
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) MSDG
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100 FC*
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 36 86 44 86 53 95 61 103 70 112 72 114 - - - - - - - - - - - -
ø16 48 104 59 104 69 114 80 125 91 136 102 147 - - - - - - - - - - - -
STK
ø20 63 118 75 150 88 163 101 176 113 188 126 201 139 214 152 227 165 240 203 278 - - - -
ø25 87 178 102 193 118 209 134 225 150 241 165 256 181 272 197 288 213 304 228 319 - - - - SRL3
ø32 122 236 144 258 166 280 188 302 209 323 231 345 253 367 275 389 297 411 318 432 494 542 604 652
ø40 183 326 210 353 236 379 263 406 290 433 316 459 342 485 369 512 395 538 472 565 646 695 776 825
ø50 - - 341 535 383 577 425 619 467 661 510 704 552 746 594 788 636 830 678 872 1025 1082 1235 1292 SRG3
ø63 - - 507 786 562 841 617 896 672 951 727 1006 782 1061 838 1117 893 1172 948 1227 1438 1502 1713 1777
ø80 - - 928 1341 1015 1428 1101 1514 1188 1601 1274 1687 1361 1774 1448 1861 1535 1948 1621 2034 2401 2467 2833 2899 SRM3
ø100 - - 1433 2000 1547 2114 1660 2227 1774 2341 1888 2455 2002 2569 2115 2682 2229 2796 2343 2910 3406 3478 3973 4045

Theoretical thrust table (Unit: N) SRT3

Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MRL2
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8

ø16
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102 MRG2
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
Push - 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102 SM‑25
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
ShkAbs
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102

ø40
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 FJ
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103 FK
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103 Spd
ø80
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 Contr
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103
Ending

753
 SSD2 Series
SCP*3
How to order
Without switch (without magnet for switch)

CMK2 SSD2 12 5 N LB I Code Description

A Model No.
With switch (built-in magnet for switch) SSD2 Double acting/single rod
CMA2
SSD2-L 12 10 T0H R N LB I SSD2-L Double acting/single rod/with switch
B Bore size (mm)
SCM 12 ø12
16 ø16

SCG A Model No. 20 ø20

25 ø25
32 ø32
SCA2 B Bore size 40 ø40
50 ø50
63 ø63
SCS2 80 ø80
100 ø100

CKV2 C Port thread

C Port thread Blank Rc thread
CAV2/ NN NPT thread (ø32 and over) (made-to-order product)
COVP/N2 GN G thread (ø32 and over) (made-to-order product)
D Cushion
SSD2 D Cushion Blank Without cushion
D With rubber cushion

SSG E Stroke length (mm)

E Stroke length
Refer to the stroke length table on the following page.
SSD
F Switch model No.
F Switch model No. Axial Radial lead Voltage Lead Bore size
Contact

Display
CAT *1 lead wire wire AC DC wire 12 16 20 25 32 40 50 63 80 100
*2 - F2S* ● 2-wire ● ●
*3 - F3S* ● 3-wire ● ●
MDC2 *8 ●
1-color display
● ●
Proximity

F2H* F2V* 2-wire

*9 F3H* F3V* ● 3-wire ● ●
G Switch quantity
MVC F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
H Option F2YH* F2YV* ● 2-wire ● ●
2-color display
*4 F3YH* F3YV* ● 3-wire ● ●
SMG T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
Reed

Precautions for model No. selection T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●
MSD/ T8H* T8V* ● ● 1-color display ● ● ● ● ●
MSDG *1 : T he T2YD* switch cannot be mounted on the ø12 and ø16 bore sizes. T1H* T1V* ● ● ● ● ● ● ● ● ●
2-wire
*2 : T he T8* switch cannot be mounted on the ø12 to ø32 bore sizes. T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
FC* *3 : The F type switch can only be mounted on the piping T3H* T3V*
3-wire
port surface of bore sizes ø20 and ø25. T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
Proximity

*4 : Piston rod of ø12 to ø25 is stainless steel as standard. T2WH* T2WV*

2-wire
STK C type snap ring is stainless steel instead of steel. T2YH* T2YV* ●
2-color display
● ● ● ● ● ● ● ●
The rod end male thread nut is stainless steel. T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●
3-wire
*5 : The mounting bracket is included at shipment. T3YH* T3YV* ● ● ● ● ● ● ● ● ●
SRL3 T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
*6 : The projection dimension of piston rod WF when LB or FA is 2-wire
selected is different from that of the standard. Refer to the T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
SRG3 dimensions on pages 761, 763, 765 and 766. The number of
the specified protruding dimension will be added at the end of * Lead wire length
the model No. printed on the metal plate on the body. Blank 1 m (standard)
SRM3 *7 : “I” and “Y” cannot be selected together. 3 3 m (option)
*8 : The F type switch with L type lead wire on ø20 models 5 5 m (option) *11
cannot be selected on stroke lengths of 15 mm or under.
SRT3 G Switch quantity
*9 : Switches are shipped with the product. Contact CKD if R 1 on rod side
assembling before shipment is necessary. H 1 on head side
MRL2 *10 : Refer to pages 750 and 751 for combinations of D 2
variations/options.
*11 : F type switch cannot be selected. H Option
MRG2 Bore size (mm) 12 16 20 25 32 40 50 63 80 100
Blank Rod end female thread ● ● ● ● ● ● ● ● ● ●
[Example of model No.] N Rod end male thread ● ● ● ● ● ● ● ● ● ●
SM‑25
SSD2-L-12-10-T0H-R-N-LB-I P6 Copper and PTFE free specifications Supported as standard ● ● ●
M *4 Piston rod material (stainless steel) ● ● ● ● ● ● ● ● ● ●

ShkAbs Model: Compact cylinder, standard S Dedicated unit for custom stroke length ● ● ● ● ● ● ● ● ● ●
●B Bore size : ø12 mm P4 Specifications for ● ● ● ● ● ● ● ● ● ●

FJ ●C Port thread : Rc thread P40 rechargeable battery ● ● ● ● ● ● ● ● ● ●

●D Cushion : No cushion I Mounting bracket

●E Stroke length : 10mm I Mounting bracket Blank Without mounting bracket
FK ●F Switch model No. : Reed switch T0H, lead wire length 1 m
*5 LB Axial foot
CB Clevis bracket (pin and snap ring included)
Spd
●
G Switch quantity : 1 on rod side
*6
FA Rod side flange
Contr I●H Option : Rod end male thread FB Head side flange
● Mounting bracket : Axial foot J Accessory (available when rod end male thread “N” is selected)
Ending
●J Accessory : Rod eye J Accessory I Rod eye
*7 Y Rod clevis (pin and snap ring included)

754
 SSD2 Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 752 for the min. stroke length with switch.
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length. SSD
*3 : Refer to pages 763 and 765 for the min. stroke length with mounting bracket LB.
CAT

How to order switch MDC2

SW T0H MVC

SMG
Switch model No.
MSD/
(Item F on page 754) MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø12 ø16 ø20 ø25 ø32 ø40 ø50
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SRG3
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SRM3
Bore size (mm)
ø63 ø80 ø100 SRT3
Mounting bracket
Foot (LB) SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Flange (FA/FB) SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
MRL2
Clevis bracket (CB) SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.

SM‑25

Specifications for rechargeable battery (catalog No. CC-1226A) ShkAbs

● Design compatible with rechargeable battery manufacturing process FJ

SSD2-…………- P4* FK
Spd
Contr

Ending

755
 SSD2 Series
SCP*3
Internal structure and parts list (ø12 to 50) (no cushion)
● SSD2-L-12 to 25 (double acting/with switch) ● SSD2-L-32 to 50 (double acting/with switch)
CMK2
1 2 3 4 5 6 7 8 10 9 11 1 2 3 4 5 6 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-12 to 25 (double acting) ● SSD2-32 to 50 (double acting)

1 2 3 4 5 6 9 10 11
CAT 1 2 3 4 5 6 9 10 11

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3 No. Part name Material Remarks No. Part name Material Remarks
ø12 to ø25: Stainless steel ø16 to ø50:
1 Piston rod 7 Spacer Aluminum alloy ø12 to ø32: Chromate
SRT3 ø32 to ø50: Steel Industrial chrome plating
2 C type snap ring Steel Zinc phosphate 8 Magnet Plastic
MRL2 3 Rod metal Special aluminum Alumite 9 Piston Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber
MRG2 5 Body Aluminum alloy Hard alumite
11 Cover
ø12 to ø25: Stainless steel
ø32 to ø50: Alumite
6 Rod packing Nitrile rubber ø32 to ø50: Aluminum alloy

SM‑25
Repair parts list
ShkAbs Bore size (mm) Kit No. Repair parts No.
ø12 SSD2-12K
FJ ø16 SSD2-16K
ø20 SSD2-20K
FK ø25 SSD2-25K 4 6 10

Spd ø32 SSD2-32K

Contr ø40 SSD2-40K
ø50 SSD2-50K
Ending

756
 SSD2 Series
Internal structure and parts list
Internal structure and parts list (ø63 to 100) (no cushion) SCP*3
● SSD2-L-63 to 100 (double acting/with switch)
CMK2
1 6 2 3 4 12 5 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-63 to 100 (double acting) SSD

1 6 2 3 4 12 5 9 10 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod Steel Industrial chrome plating 7 Spacer Aluminum alloy
2 C type snap ring Steel Zinc phosphate 8 Magnet Plastic SRT3
3 Rod metal Aluminum alloy Chromate 9 Piston Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber MRL2
5 Body Aluminum alloy Hard alumite 11 Cover Aluminum alloy Alumite
6 Rod packing Nitrile rubber 12 Bush Oiles drymet *1 MRG2
*1: Material is steel for copper and PTFE free specifications.
SM‑25
Repair parts list
Bore size (mm) Kit No. Repair parts No. ShkAbs
ø63 SSD2-63K
ø80 SSD2-80K 4 6 10 FJ
ø100 SSD2-100K
FK
Spd
Contr

Ending

757
 SSD2 Series
SCP*3
Internal structure and parts list (ø12 to 50) (with rubber cushion)
● SSD2-L-12D to 32D (double acting/with switch) ● SSD2-L-40D to 50D (double acting/with switch)
CMK2
1 2 5 4 3 7 6 11 12 8 13 9 10 1 2 4 5 3 7 6 11 12 8 13 9 10

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-12D to 32D (double acting) ● SSD2-40D, 50D (double acting)

1 2 5 4 3 7 6 13 8 9 10 1 2 4 5 3 7 6 8 13 9 10
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3 No. Part name Material Remarks No. Part name Material Remarks
ø12 to ø25: Stainless steel ø16 to ø50: 8 Piston packing Nitrile rubber
1 Piston rod
SRT3 ø32 to ø50: Steel Industrial chrome plating 9 Cushion rubber (H) Urethane rubber
2 C type snap ring Steel Zinc phosphate ø12 to ø25: Stainless steel
10 Cover ø32 to ø50: Alumite
MRL2 3 Rod metal gasket Nitrile rubber ø32 to ø50: Aluminum alloy
4 Rod packing Nitrile rubber 11 Spacer Aluminum alloy ø12 to ø32: Chromate
MRG2 5 Rod metal Aluminum alloy Alumite 12 Magnet Plastic
6 Body Aluminum alloy Hard alumite 13 Piston Aluminum alloy Chromate
SM‑25 7 Cushion rubber (R) Urethane rubber

ShkAbs Repair parts list

Bore size (mm) Kit No. Repair parts No.
FJ ø12 SSD2-12DK
ø16 SSD2-16DK
FK
ø20 SSD2-20DK
Spd ø25 SSD2-25DK 3 4 7 8 9

Contr ø32 SSD2-32DK

ø40 SSD2-40DK
Ending ø50 SSD2-50DK

758
 SSD2 Series
Internal structure and parts list
Internal structure and parts list (ø63 to 100) (with rubber cushion) SCP*3
● SSD2-L-63D to 100D (double acting/with switch)
CMK2
1 4 2 5 3 7 6 11 12 8 13 9 10
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
14
SSG

● SSD2-63D to 100D (double acting) SSD

1 4 2 5 3 7 6 8 13 9 10
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
14
SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod Steel Industrial chrome plating 8 Piston packing Nitrile rubber
2 C type snap ring Steel Zinc phosphate 9 Cushion rubber (H) Urethane rubber SRT3
3 Rod metal gasket Nitrile rubber 10 Cover Aluminum alloy Alumite
4 Rod packing Nitrile rubber 11 Spacer Aluminum alloy MRL2
5 Rod metal Aluminum alloy Chromate 12 Magnet Plastic
6 Body Aluminum alloy Hard alumite 13 Piston Aluminum alloy Chromate MRG2
7 Cushion rubber (R) Urethane rubber 14 Bush Oiles drymet
SM‑25
Repair parts list
Bore size (mm) Kit No. Repair parts No.
ShkAbs
ø63 SSD2-63DK
ø80 SSD2-80DK 3 4 7 8 9
FJ
ø100 SSD2-100DK
FK
Spd
Contr

Ending

759
 SSD2 Series
SCP*3
Dimensions
● SSD2-L-12 to 25 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2 ø12/ø16 A + stroke length a’ wf
WF B + stroke length c’
*4 T
CMA2 FA
8-J C D 2-EE

øMM
Mounting hole
SCM
KK
HD
SCG

øMM
FB
N
F

kk’
SCA2 Width across flats M
FA

Width across flats H

SCS2 8-KA
øK

øI
M
N RD
CKV2 F

CAV2/ ø20/ø25 A + stroke length

COVP/N2 WF B + stroke length
*4
FA
SSD2 8-J C D
2-EE
Mounting
SSG hole
KK HD
SSD
øMM
FB
N
F

CAT

MDC2
øK
8-KA
øI

MVC M RD

N
SMG F

MSD/
MSDG Code Common dimensions with switch
Bore size (mm) A *1 B *1 C D EE F FA *4 FB I J K KA KK M MM N WF
FC* ø12 25.5 22 5.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 25.5 22 5.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
STK ø20 34 29.5 8 5.5 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 37.5 32.5 11 6 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
SRL3 Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Proximity F2S/F3S
dimensions T5H/T5V *6 T3H/T3V *6 T3WH/T3WV *6 F2YH/F2YV, F3YH/F3YV
SRG3 Bore size (mm) HD RD HD RD HD RD HD RD HD RD
ø12 1.5(0) 1.5(3) 1.5(0) 1.5(3) 3.5(2) 3.5(5)
SRM3 ø16 0 4 0 4.5 1 6
ø20 3 7.5 3 7.5 5 9.5 7.5 12 6.5 11
SRT3 ø25 4 9.5 4 9.5 6 11.5 8.5 14 7.5 13
*1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
MRL2 length) to the stroke length value.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
· For ø16: A + stroke length = 35.5 B + stroke length = 32
MRG2 When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø16: A + stroke length = 32.5 B + stroke length = 29
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
SM‑25
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
ShkAbs *5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : Dimensions in ( ) of codes HD and RD are for the type with rubber cushion.
*7 : Only F switch is available for the ø20 or ø25 piping port surface.
FJ
● Rod end male thread
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

760
 SSD2 Series
Dimensions
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-L-12 to 25 -LB SSD2-L-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

øCA
SCG

N
E
AT
AH

Low head hexagon

socket bolt 8-G SCA2

CD
AU
TR N

H
4-øAB CJ + stroke length

10
TS AK
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size CA CB CC CD D E G H N UB
AB AG AH AK AT AU G N TR TS M (mm)
(mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3
CAT
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.3

20 -0.1
-0.3
MDC2
Code Male thread Code Female thread Male thread
Bore size
WF LF A B LX a’ wf LF A B LX
Bore size
WF A B CJ a’ wf A B CJ MVC
(mm) (mm)
ø12 13.5 19.5 40.3 22 10 10.5 13.5 19.5 50.8 22 10 ø12 3.5 45.5 22 39.5 10.5 3.5 56 22 39.5
ø16 13.5 19.5 40.3 22 10 12 13.5 19.5 52.3 22 10 ø16 3.5 46.5 22 40.5 12 3.5 58.5 22 40.5 SMG
ø20 14.5 20.5 51.2 29.5 17.5 14 14.5 20.5 65.2 29.5 17.5 ø20 4.5 61 29.5 52 14 4.5 75 29.5 52
ø25 15 22.5 54.7 32.5 17.5 17.5 15 22.5 72.2 32.5 17.5 ø25 5 67.5 32.5 57.5 17.5 5 85 32.5 57.5
MSD/
MSDG
● Rod side flange (FA) with switch ● Head side flange (FB) with switch
SSD2-L-12 to 25 -FA SSD2-L-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size
ShkAbs
Bore size FD FH FL FM FT N G
FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12 FJ
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size
WF A B a’ wf A B
Bore size
WF A B a’ wf A B Spd
(mm) (mm) Contr
ø12 13.5 35.5 22 10.5 13.5 46 22 ø12 3.5 31 22 10.5 3.5 41.5 22
ø16 13.5 35.5 22 12 13.5 47.5 22 ø16 3.5 31 22 12 3.5 43 22
ø20 14.5 44 29.5 14 14.5 58 29.5 ø20 4.5 42 29.5 14 4.5 56 29.5 Ending
ø25 15 47.5 32.5 17.5 15 65 32.5 ø25 5 45.5 32.5 17.5 5 63 32.5

761
 SSD2 Series
SCP*3
Dimensions
● SSD2-12 to 25 (without switch) ● Rod end male thread
CMK2
ø12/ø16 a’ wf
CMA2 A + stroke length
c’
T
F WF B + stroke length

øMM
SCM N C D
8-J 2-EE
KK
SCG Mounting hole

SCA2 kk’

øMM
N
F

Width across flats M

SCS2 øK Width across flats H

CKV2 M 8-KA øI

CAV2/
COVP/N2

SSD2 ø20/ø25

SSG
A + stroke length
F
WF B + stroke length
SSD N

8-J C D 2-EE
CAT Mounting hole

KK
MDC2
øMM

MVC
F
N

øK
SMG
MSD/ øI
8-KA
MSDG M

FC*

STK

SRL3
Code Dimensions without switch and common dimensions
Bore size (mm) A *1 B *1 C D EE F I J K KA KK M MM N WF
SRG3
ø12 20.5 17 5.5 5.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 20.5 17 5.5 5.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
SRM3
ø20 24 19.5 8 5.5 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 27.5 22.5 11 6 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
SRT3

MRL2 ●
Rod end male thread
Code
a’ c’ H kk’ M MM T wf
MRG2 Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
SM‑25
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
ShkAbs
*1 : ‌To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
FJ (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
· For ø16: A + stroke length = 30.5 / B + stroke length = 27
FK When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø16: A + stroke length = 27.5 / B + stroke length = 24
Spd *2 : For dimensions of individual accessories, refer to pages 1046 to 1049.
Contr

Ending

762
 SSD2 Series
Dimensions
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch ● Clevis bracket (CB) without switch
SSD2-12 to 25 -LB SSD2-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG

øCA
N

SCG

N
E
AT
AH

Low head hexagon

socket bolt 8-G SCA2

CD
AU
TR N

H
4-øAB CJ + stroke length

10
TS AK
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3
CAT
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 +0.2

8.2 0 12 8 5 36 M6×16 C4 25.5 16 -0.1
MDC2
-0.3

ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 0

+0.2
14 10 5 40 M6×16 C5 28 20 -0.1
-0.3

Code Male thread Code Female thread Male thread

Bore size Bore size
MVC
WF LF A B LX a’ wf LF A B LX WF A B CJ a’ wf A B CJ
(mm) (mm)
ø12 13.5 19.5 35.3 17 5 10.5 13.5 19.5 45.8 17 5 ø12 3.5 40.5 17 34.5 10.5 3.5 51 17 34.5
ø16 13.5 19.5 35.3 17 5 12 13.5 19.5 47.3 17 5 ø16 3.5 41.5 17 35.5 12 3.5 53.5 17 35.5 SMG
ø20 14.5 20.5 41.2 19.5 7.5 14 14.5 20.5 55.2 19.5 7.5 ø20 4.5 51 19.5 42 14 4.5 65 19.5 42
ø25 15 22.5 44.7 22.5 7.5 17.5 15 22.5 62.2 22.5 7.5 ø25 5 57.5 22.5 47.5 17.5 5 75 22.5 47.5
MSD/
Note: ø20: LB cannot be selected for 5 mm stroke length.
MSDG
● Rod side flange (FA) without switch ● Head side flange (FB) without switch
SSD2-12 to 25 -FA SSD2-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size
ShkAbs
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size WF A B a’ wf A B Bore size Spd
(mm) WF A B a’ wf A B
(mm)
ø12 13.5 30.5 17 10.5 13.5 41 17 ø12 3.5 26 17 10.5 3.5 36.5 17 Contr
ø16 13.5 30.5 17 12 13.5 42.5 17 ø16 3.5 26 17 12 3.5 38 17
ø20 14.5 34 19.5 14 14.5 48 19.5 ø20 4.5 32 19.5 14 4.5 46 19.5 Ending
ø25 15 37.5 22.5 17.5 15 55 22.5 ø25 5 35.5 22.5 17.5 5 53 22.5

763
 SSD2 Series
SCP*3
Dimensions
● SSD2-L-32 to 100 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2 F A + stroke length a’ wf
N c’
WF B + stroke length T
CMA2 C D 2-EE
H 8-J

øMM
0

Mounting hole
SCM KK

HD
SCG

øMM
kk’
FB
G

N
F

Width across flats M

SCA2
Width across flats H
SCS2
øK M RD øI 8-KA
FA
CKV2 *4
● SSD2-32 to 100 (without switch)
CAV2/ F
COVP/N2 A + stroke length
N WF B + stroke length
SSD2 H 8-J
C D 2-EE
0

Mounting hole
KK
SSG

SSD
øMM
G
F

CAT

øK
MDC2
M 8-KA øI

MVC Code Without switch Common dimensions with switch

Bore size (mm) A *1, *6 B *1, *6 A *1 B *1 C *8 D *8 EE F FA *4 FB G H I J K KA KK M MM N O WF
SMG ø32 30(40) 23(33) 40 33 8(10) 8(5.5) Rc1/8 *7 45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face
Depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 7
9 spot face
MSD/ ø40 36.5(46.5) 29.5(39.5) 46.5 39.5 12(11.5) 8.5(8) Rc1/8 52 26.5(30) 27.5 57 15 5.5 Depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7
MSDG
11 spot face
ø50 38.5(48.5) 30.5(40.5) 48.5 40.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 Depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8
14 spot face
ø63 44(54) 36(46) 54 46 13 11 Rc1/4 77 39(42.5) 28.5 84 23 8.7 Depth 9 103 M10 depth 25 M10 depth 15 17 20 60 7 8
FC* ø80 53.5(63.5) 43.5(53.5) 63.5 53.5 16 13 Rc3/8 98 49.5(53) 28.5 104 31 10.5 17.5 spot face
132 M12 depth 28 M16 depth 21 22 25 77 6 10
Depth 11
17.5 spot face
ø100 65(75) 53(63) 75 63 23 15 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 Depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12
STK Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
Switch dimensions
Bore size (mm) HD *2 RD *2 HD *2 RD *2 HD RD
SRL3 ø32 4 9.5 4 9.5 6 11.5
ø40 7 12 7 12 8.5 13.5
SRG3 ø50 7.5 12.5 7.5 12.5 9 14
ø63 12.5 13 12.5 13 14 14.5
ø80 17.5 15.5 17.5 15.5 19 17
SRM3
ø100 23 19.5 23 19.5 24.5 21
*1 : ‌To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
SRT3 length) to the stroke length value.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
MRL2 · For ø32: A + stroke length = 40 B + stroke length = 33
When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø32: A + stroke length = 37 B + stroke length = 30
MRG2 *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
SM‑25
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
ShkAbs *7 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*8 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
● Rod end male thread
FJ
Code
a’ c’ H kk’ M MM T wf
FK Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5
Spd ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Contr ø50 28.5 26 27 M18×1.5 17 20 11 5
ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending
ø100 35.5 32.5 41 M26×1.5 27 30 16 8

764
 SSD2 Series
Dimensions
Dimensions SCP*3
● Axial foot (LB)
SSD2-(L)-32 to 100 -LB CMK2

A + stroke length Rod end male thread CMA2

WF B + stroke length M A + stroke length
a’ wf B + stroke length SCM

SCG
AG

SCA2

AH
AD

AT
AE

AU
N
4-øAB AK
Low head hexagon socket bolt 4-G SCS2
TR
TS LF LX + stroke length LF
CKV2
Code Common dimensions Female thread CAV2/
Bore size Without switch With switch COVP/N2
AB AD AE AG AH AK AT AU G N TR TS M WF LF
(mm) A B LX A B LX
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 17 25 47.2(57.2) 23(33) 7(17) 57.2 33 17 SSD2
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 17 25 53.7(63.7) 29.5(39.5) 13.5(23.5) 63.7 39.5 23.5
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 18 29.5 56.7(66.7) 30.5(40.5) 7.5(17.5) 66.7 40.5 17.5 SSG
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 18 31 63.2(73.2) 36(46) 10(20) 73.2 46 20
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 20 35 75(85) 43.5(53.5) 13.5(23.5) 85 53.5 23.5 SSD
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 22 39 88(98) 53(63) 19(29) 98 63 29
Code Male thread Note: L
 B cannot be selected when B + stroke length is at or less than CAT
Bore size Without switch With switch the stroke value below.
a’ wf LF ø80: 72 or less, ø: 69 or less
MDC2
(mm) A B LX A B LX
ø32 23.5 15 23 68.7(78.7) 23(33) 7(17) 78.7 33 17
ø40 23.5 15 23 75.2(85.2) 29.5(39.5) 13.5(23.5) 85.2 39.5 23.5 MVC
ø50 28.5 15 26.5 82.2(92.2) 30.5(40.5) 7.5(17.5) 92.2 40.5 17.5
ø63 28.5 15 28 88.7(98.7) 36(46) 10(20) 98.7 46 20 SMG
ø80 35.5 18 33 108.5(118.5) 43.5(53.5) 13.5(23.5) 118.5 53.5 23.5
ø100 35.5 18 35 119.5(129.5) 53(63) 19(29) 129.5 63 29 MSD/
MSDG
* Dimensions in ( ) are for stroke lengths of more than 50 mm.

FC*

STK
● ‌Clevis bracket (CB)
SSD2-(L)-32 to 100 -CB
SRL3

A + stroke length UB -0.1 Rod end male thread

-0.3
SRG3
WF B + stroke length D CB +00.2
CC A + stroke length
a’ wf B + stroke length SRM3
MR
R

SRT3
E
N

MRL2
CD
H1

AC
0

CJ + stroke length Mounting bolt 4-G N

E CJ + stroke length MRG2

Code Common dimensions Female thread Male thread SM‑25

Bore size Without switch With switch Without switch With switch
AC CB CC CD D E G MR N UB WF a’ wf
(mm) A B CJ A B CJ A B CJ A B CJ ShkAbs
ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36 7 60(70) 23(33) 50 70 33 60 23.5 5 81.5(91.5) 23(33) 48 91.5 33 58
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 68.5(78.5) 29.5(39.5) 58.5 78.5 39.5 68.5 23.5 5 90(100) 29.5(39.5) 56.5 100 39.5 66.5 FJ
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 80.5(90.5) 30.5(40.5) 66.5 90.5 40.5 76.5 28.5 5 106(116) 30.5(40.5) 63.5 116 40.5 73.5
ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 88(98) 36(46) 74 98 46 84 28.5 5 113.5(123.5) 36(46) 71 123.5 46 81
FK
ø80 9 28.2 27 18 10 98 M12×40 18 77 56 10 109.5(119.5) 43.5(53.5) 91.5 119.5 53.5 101.5 35.5 8 143(153) 43.5(53.5) 89.5 153 53.5 99.5
ø100 12 32.2 31 22 13 117 M12×40 22 94 64 12 132(142) 53(63) 110 142 63 120 35.5 8 163.5(173.5) 53(63) 106 173.5 63 116 Spd
* Dimensions in ( ) are for stroke lengths of more than 50 mm. Contr

Ending

765
 SSD2 Series
SCP*3
Dimensions
● ‌Rod side flange (FA)
CMK2 SSD2-(L)-32 to 100 -FA

Rod end male thread

CMA2
FM A + stroke length A + stroke length
FL WF B + stroke length a’ wf B + stroke length
SCM N 4-FD
FT FT

SCG

SCA2
FC
FH

SCS2
Mounting bolt 4-G
CKV2 ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
CAV2/
COVP/N2
Code Common dimensions Female thread Male thread
SSD2 Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B
SSG ø32 34 5.5 48 56 65 8 34 M6×16 17 40(50) 23(33) 50 33 23.5 15 61.5(71.5) 23(33) 71.5 33
ø40 40 5.5 54 62 72 8 40 M6×16 17 46.5(56.5) 29.5(39.5) 56.5 39.5 23.5 15 68(78) 29.5(39.5) 78 39.5
SSD ø50 50 6.6 67 76 89 9 50 M8×20 18 48.5(58.5) 30.5(40.5) 58.5 40.5 28.5 15 74(84) 30.5(40.5) 84 40.5
ø63 60 9 80 92 108 9 60 M10×25 18 54(64) 36(46) 64 46 28.5 15 79.5(89.5) 36(46) 89.5 46
CAT ø80 77 11 99 116 134 11 77 M12×40 20 63.5(73.5) 43.5(53.5) 73.5 53.5 35.5 18 97(107) 43.5(53.5) 107 53.5
ø100 94 11 117 136 154 11 94 M12×40 22 75(85) 53(63) 85 63 35.5 18 106.5(116.5) 53(63) 116.5 63
MDC2 * Dimensions in ( ) are for stroke lengths of more than 50 mm.

MVC

SMG
● ‌Head side flange (FB)
MSD/ SSD2-(L)-32 to 100 -FB
MSDG

FC* Rod end male thread

FM
A + stroke length FL A + stroke length
STK WF B + stroke length FT N 4-FD a’ wf B + stroke length FT

SRL3
FC
FH

SRG3

SRM3
Mounting bolt 4-G
SRT3 ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt

MRL2
Code Common dimensions Female thread Male thread
MRG2 Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B
SM‑25 ø32 34 5.5 48 56 65 8 34 M6×16 7 38(48) 23(33) 48 33 23.5 5 59.5(69.5) 23(33) 69.5 33
ø40 40 5.5 54 62 72 8 40 M6×16 7 44.5(54.5) 29.5(39.5) 54.5 39.5 23.5 5 66(76) 29.5(39.5) 76 39.5
ShkAbs ø50 50 6.6 67 76 89 9 50 M8×20 8 47.5(57.5) 30.5(40.5) 57.5 40.5 28.5 5 73(83) 30.5(40.5) 83 40.5
ø63 60 9 80 92 108 9 60 M10×25 8 53(63) 36(46) 63 46 28.5 5 78.5(88.5) 36(46) 88.5 46
FJ ø80 77 11 99 116 134 11 77 M12×40 10 64.5(74.5) 43.5(53.5) 74.5 53.5 35.5 8 98(108) 43.5(53.5) 108 53.5
ø100 94 11 117 136 154 11 94 M12×40 12 76(86) 53(63) 86 63 35.5 8 107.5(117.5) 53(63) 117.5 63
FK * Dimensions in ( ) are for stroke lengths of more than 50 mm.

Spd
Contr

Ending

766
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

767
 Compact cylinder double acting/single rod (large bore size)

SSD2 Series
SCP*3 ● Bore size: ø125/ø140/ø160/ø180/ø200
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2
Item
SSD2-L (with switch)
SCA2 Bore size mm ø125 ø140 ø160 ø180 ø200
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar) 0.7 (≈100 psi, 7 bar)
CKV2
Min. working pressure MPa 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar) 1.05 (≈150 psi, 10.5 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size Rc3/8 Rc1/2
+2.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 300 20 to 300

Cushion With rubber cushion (standard)
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed With rubber cushion 6.52 6.52 7.78 12.4
CAT energy J Without cushion -

MDC2

MVC Stroke length

Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
SMG ø125
ø140 10, 20, 30, 40, 50
MSD/
MSDG ø160 75, 100, 125, 150 300 1
ø180 175, 200, 250, 300
FC* ø200
*1: For the type with switch, refer to the table of switch mounting quantity and minimum stroke length.
STK

SRL3
Number of installed switches and min. stroke length (mm)
SRG3 Switch quantity 1 2 3 4 5
Switch model No.
SRM3 Bore size (mm) T* T* T* T* T*

ø125 5 5 40 55 70
SRT3
ø140 5 5 40 55 70
ø160 5 5 40 55 70
MRL2
ø180 5 5 40 55 70

MRG2 ø200 5 5 40 55 70
Note: Less than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch is not available.

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

768
 SSD2 (Large bore size) Series
Specifications
Switch specifications SCP*3
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire CMK2
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT CMA2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SCM
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SCG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA SCA2
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without LED SCS2
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON)
CKV2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less CAV2/
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 COVP/N2
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 SSD2
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. SSG
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SSD
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
CAT
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: kg)
MDC2
Stroke length (mm) 10 20 30 40 50 75 100
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch MVC
ø125 4.58 4.68 4.85 4.95 5.11 5.21 5.38 5.48 5.64 5.74 6.30 6.40 6.97 7.07
ø140 6.36 6.47 6.66 6.77 6.97 7.08 7.27 7.38 7.58 7.69 8.34 8.45 9.10 9.21 SMG
ø160 8.64 8.76 9.02 9.14 9.40 9.52 9.78 9.90 10.16 10.28 11.11 11.23 12.06 12.18
MSD/
ø180 12.98 13.06 13.38 13.46 13.78 13.86 14.18 14.26 14.58 14.66 15.59 15.67 16.59 16.67
MSDG
ø200 17.23 17.31 17.69 17.77 18.16 18.24 18.62 18.70 19.08 19.16 20.23 20.31 21.39 21.47
Stroke length (mm) 125 150 175 200 250 300 FC*
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø125 7.63 7.73 8.30 8.40 8.96 9.06 9.62 9.72 10.95 11.05 12.27 12.37
STK
ø140 9.86 9.97 10.63 10.74 11.39 11.50 12.15 12.26 13.68 13.79 15.20 15.31
SRL3
ø160 13.01 13.13 13.96 14.08 14.91 15.03 15.86 15.98 17.76 17.88 19.66 19.78
ø180 17.59 17.67 18.59 18.67 19.60 19.68 20.60 20.68 22.60 22.68 24.61 24.69
SRG3
ø200 22.54 22.62 23.70 23.78 24.85 24.93 26.01 26.09 28.32 28.40 30.63 30.71
SRM3

Theoretical thrust table (Unit: N) SRT3

Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MRL2
Push 1.23 × 103 1.84 × 103 2.45 × 103 3.68 × 103 4.91 × 103 6.14 × 103 7.36 × 103 8.59 × 103 9.82 × 103 1.10 × 104 1.23 × 104
ø125
Pull 1.13 × 103 1.70 × 103 2.26 × 103 3.39 × 103 4.52 × 103 5.65 × 103 6.79 × 103 7.92 × 103 9.05 × 103 1.02 × 104 1.13 × 104 MRG2
Push 1.54 × 10 2.31 × 10 3.08 × 10 4.62 × 10 6.16 × 10 7.70 × 10 9.24 × 10 1.08 × 10 1.23 × 10 1.39 × 10 1.54 × 10
3 3 3 3 3 3 3 4 4 4 4
ø140 SM‑25
Pull 1.44 × 103 2.16 × 103 2.89 × 103 4.33 × 103 5.77 × 103 7.22 × 103 8.66 × 103 1.01 × 104 1.15 × 104 1.30 × 104 1.44 × 104
Push 2.01 × 10 3.02 × 10 4.02 × 10 6.03 × 10 8.04 × 10 1.01 × 10 1.21 × 10 1.41 × 10 1.61 × 10 1.81 × 10 2.01 × 10
3 3 3 3 3 4 4 4 4 4 4
ø160 ShkAbs
Pull 1.88 × 103 2.83 × 103 3.77 × 103 5.65 × 103 7.54 × 103 9.42 × 103 1.13 × 104 1.32 × 104 1.51 × 104 1.70 × 104 1.88 × 104
Push 2.54 × 103 3.82 × 103 5.09 × 103 7.63 × 103 1.02 × 104 1.27 × 104 1.53 × 104 1.78 × 104 - - -
ø180 FJ
Pull 2.39 × 103 3.58 × 103 4.77 × 103 7.16 × 103 9.54 × 103 1.19 × 104 1.43 × 104 1.67 × 104 - - -
Push 3.14 × 103 4.71 × 103 6.28 × 103 9.43 × 103 1.26 × 104 1.57 × 104 1.89 × 104 2.20 × 104 - - -
ø200 FK
Pull 3.02 × 103 4.52 × 103 6.03 × 103 9.05 × 103 1.21 × 104 1.51 × 104 1.81 × 104 2.11 × 104 - - -
Spd
Contr

Ending

769
 SSD2 (Large bore size) Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2 125 50 N SSD2 Double acting/single rod
SSD2-L Double acting/single rod/with switch
With switch (built-in magnet for switch)
CMA2 200 Bore size (mm)
SSD2-L 100 T0H R N B

125 ø125
SCM 140 ø140
160 ø160
SCG A Model No.
180 ø180
200 ø200
SCA2 B Bore size
C Port thread
C Port thread
SCS2 Blank Rc thread
NN NPT thread (ø125 to ø160) (made-to-order product)
CKV2 GN G thread (ø125 to ø160) (made-to-order product)

CAV2/ D Stroke length (mm)

D Stroke length
COVP/N2
Refer to the stroke length table on the following page.
SSD2
E Switch model No.
E Switch model No.

Contact
SSG *1
Lead wire Lead wire Voltage Lead
Display
Straight L-shaped AC DC Line
SSD TOH* T0V* ● ● 1-color display

Reed
T5H* T5V* ● ● Without indicator lamp 2-wire
CAT T8H* T8V* ● ● 1-color display
T1H* T1V* ●
MDC2 2-wire
T2H* T2V* ● 1-color display
T3H* T3V* ●
MVC 3-wire
T3PH* T3PV* ● 1-color display
T2WH* T2WV* ●
Proximity

SMG 2-wire
T2YH* T2YV* ●
2-color display
MSD/ T3WH* T3WV* ●
MSDG 3-wire
T3YH* T3YV* ●

FC* T2JH* T2JV* ● 1-color display off-delay 2-wire

T2YD* - ● 2-color display
STK Precautions for model No. selection T2YDT* - ● for AC magnetic field
2-wire

*1: S
‌ witches are shipped with the product. Contact CKD * Lead wire length
if assembling before shipment is necessary.
SRL3 Blank 1 m (standard)
3 3 m (option)
SRG3 [Example of model No.] 5 5 m (option)
SSD2-L-125-50-T0H-R-N F Switch quantity
SRM3 F Switch
Model: Compact cylinder, standard R 1 on rod side
quantity
SRT3 ●
B Bore size : 125 mm H 1 on head side
●
C Port thread : Rc thread
D 2
●
D Stroke length : 50mm
MRL2 ●
E Switch model No. : Reed T0H switch G Option
· Lead wire length 1 m G Option
Blank Rod end female thread
MRG2 ●
F Switch quantity : 1 on rod side
N Rod end male thread
●
G Option : Rod end male thread
P4
SM‑25 Specifications for rechargeable battery
P40

ShkAbs

FJ

FK
Spd
Contr

Ending

770
 SSD2 (Large bore size) Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø125 ø140 ø160 ø180 ø200 CMK2
10 ● ● ● ● ●
20 ● ● ● ● ● CMA2
30 ● ● ● ● ●
40 ● ● ● ● ● SCM
Standard stroke length

50 ● ● ● ● ●
75 ● ● ● ● ● SCG
100 ● ● ● ● ●
125 ● ● ● ● ●
SCA2
150 ● ● ● ● ●
SCS2
175 ● ● ● ● ●
200 ● ● ● ● ●
CKV2
250 ● ● ● ● ●
300 ● ● ● ● ● CAV2/
COVP/N2
Min. stroke length (mm) *1 1
Max. stroke length (mm) 300 SSD2
Custom stroke length *2 In 1 mm increments
*1 : ‌Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color SSG
display, off-delay, AC magnetic field proof, T1* or T8* switch are not available.
Refer to page 768 for the number of installed switches and the min. stroke length. SSD
*2 : Total length dimension with custom stroke length is handled as custom stroke dedicated
length.
CAT

MDC2

How to order switch MVC

SW T0H SMG
MSD/
MSDG
Switch model No.
(Item F on page 770)
FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

771
 SSD2 (Large bore size) Series
SCP*3
Internal structure and parts list (ø125 to ø160) (with cushion)
● SSD2-L-125 to 160 (double acting/single rod/with switch)
CMK2

CMA2
1 2 3 4 5 6 7 8 9 10 14 11 12 13
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG
● SSD2-125 to 160 (double acting/single rod/without switch)
SSD

CAT
1 2 3 4 5 6 7 8 9 10 11 12 13

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3 No. Part name Material Remarks No. Part name Material Remarks
1 Rod packing Nitrile rubber 9 Piston Aluminum die-casting
SRM3 2 Rod metal Aluminum die-casting Chromate 10 Piston packing Nitrile rubber
3 C type snap ring Steel Zinc phosphate 11 Wear ring Polyacetal resin
SRT3 4 Metal gasket Nitrile rubber 12 Hexagon nut Steel Zinc chromate
5 Cushion rubber Urethane rubber 13 Base plate Aluminum die-casting Chromate
MRL2 6 Bush Oiles drymet 14 Magnet Rubber With switch only
7 Body Aluminum alloy Hard alumite
MRG2 8 Piston rod Steel Industrial chrome plating

SM‑25
Repair parts list
ShkAbs Bore size (mm) Kit No. Repair parts No.
ø125 SSD2-125K
FJ ø140 SSD2-140K 1 4 5 10 11

ø160 SSD2-160K
FK *1: Specify the kit No. when placing an order.

Spd
Contr

Ending

772
 SSD2 (Large bore size) Series
Internal structure and parts list
Internal structure and parts list (ø180, ø200) SCP*3
● SSD2-L-180, 200 (double acting/single rod/with switch)
CMK2

CMA2
1 2 3 4 5 7 6 8 10 14 11 9 13 12
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-180, 200 (double acting/single rod/without switch) SSD

CAT

1 2 3 4 5 7 6 8 10 11 9 13 12 MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

Parts list SRM3

No. Part name Material Remarks No. Part name Material Remarks
1 Rod packing Nitrile rubber 9 Piston Aluminum alloy
SRT3
2 Rod metal Cast iron Paint 10 Piston packing Nitrile rubber
MRL2
3 C type snap ring Steel Zinc phosphate 11 Wear ring Polyacetal resin
4 Gasket Nitrile rubber 12 Hexagon nut Steel Zinc chromate
MRG2
5 Cushion rubber Urethane rubber 13 Cover Cast iron Paint
6 Bush Oiles drymet 14 Magnet Rubber With switch only
SM‑25
7 Body Aluminum alloy Hard alumite
8 Piston rod Steel Industrial chrome plating
ShkAbs

Repair parts list FJ

Bore size (mm) Kit No. Repair parts No.
ø180 SSD2-180K
1 4 5 10 11
FK
ø200 SSD2-200K
Spd
Contr

Ending

773
 SSD2 (Large bore size) Series
SCP*3
Dimensions (ø125 to ø160)
● SSD2-(L)-125 to 160 (double acting/single rod) ● Rod end male thread
CMK2
a’ wf
c’
CMA2 T

øMM
SCM F A + stroke length
2-EE N WF B + stroke length
SCG L C D
b a a b

SCA2
kk’
KK Width across flats H
SCS2 Width across flats M
HD
øMM
CKV2
FB
N
F

RD

CAV2/
COVP/N2

SSD2
øK FA 8-J 8-KA
SSG M *1 Mounting hole øI

SSD

CAT

MDC2 Code Common dimensions with switch

Bore size (mm) A B C D EE F I J K KA KK L M MM N WF
MVC ø125 99 83 29 29 Rc3/8 142 12.5 20 spot face depth 13 190 M14 depth 25 M22 depth 30 72 30 35 114 16
ø140 99 83 27.5 27.5 Rc3/8 158 12.5 20 spot face depth 13 210 M14 depth 25 M22 depth 30 80 30 35 128 16
SMG ø160 108 91 30 30 Rc3/8 178 14.7 23 spot face depth 15.2 238 M16 depth 28 M24 depth 33 90 36 40 144 17

MSD/ Code T0H/V, T2H/V, T3H/V, T5/V T2YH/V, T3YH/V, T2JH/V T1H/V, T2YD T2WH/V, T3WH/V T8H/V
MSDG FA FA FA FA FA
Bore size (mm) HD RD FB HD RD FB HD RD FB HD RD FB HD RD FB
*1 *1 *1 *1 *1
FC* ø125 30 35
71.5
44.5 28.5 33.5
77
48 28.5 33.5
82.5
48 31.5 36.5
71.5
44.5 24 29
77
48
(75) (80) (85.5) (75) (80)

STK 79.5 85 90.5 79.5 85

ø140 31.5 33.5 44.5 30 32 48 30 32 48 33 35 44.5 25.5 27.5 48
(83) (88) (93.5) (83) (88)
89.5 95 100.5 89.5 95
SRL3 ø160 34 39
(93)
48.5 32.5 37.5
(98)
52 32.5 37.5
(103.5)
52 35.5 40.5
(93)
48.5 28 33
(98)
52

*1: Dimensions in ( ) of FA are for the radial lead wire.

SRG3

SRM3 Dimensions of rod end male thread

Code
SRT3 Bore size (mm) a’ c’ H kk’ M MM T wf

ø125 45 42 46 M30×1.5 30 35 18 13
MRL2 ø140 45 42 46 M30×1.5 30 35 18 13
ø160 50 47 55 M36×1.5 36 40 21 14
MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

774
 SSD2 (Large bore size) Series
Dimensions
Dimensions (ø180, ø200) SCP*3
● SSD2-(L)-180, 200 (double acting/single rod) ● Rod end male thread
CMK2

CMA2

F A + stroke length SCM

50 14
N 17 B + stroke length
2-Rc1/2 47
L C D
21 SCG
a b

ø40
b a

SCA2
M24 depth 33
M36×1.5
HD Width across flats 55 SCS2

ø40
Width across flats 36
N
F

RD
CKV2
3
CAV2/
COVP/N2
Plain washer (4)
SSD2
øK

36

ø19.5
FA
2 x 4-M22 depth 38
*2
SSG
8-ø31.5 spot face depth 26
SSD

CAT

Code MDC2
A B C D F K L N
Bore size (mm)
ø180 119 102 32.5 32.5 204 270 104 162 MVC
ø200 126 109 33.5 33.5 226 300 110 182
Code T0H/V, T2H/V, T3H/V, T5H/V T2YH/V, T3YH/V, T2JH/V T1H/V, T2YD T2WH/V, T3WH/V T8H/V SMG
Bore size (mm) HD RD FA *1
HD RD FA *1
HD RD FA *1
HD RD FA *1
HD RD FA *1
MSD/
99 104.5 110 99 104.5 MSDG
ø180 39.5 43.5 38.5 42.5 38.5 42.5 41.5 45.5 33.5 37.5
(102.5) (107.5) (113) (102.5) (107.5)
109.5 115 120.5 109.5 115 FC*
ø200 44.5 45.5 43.5 44.5 43.5 44.5 46.5 47.5 38.5 39.5
(113) (118) (123.5) (113) (118)
*1: Dimensions in ( ) of FA are for the radial lead wire. STK
*2: 2×4-M22 through hole for 20 mm or less stroke length.

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

775
 Compact cylinder, double acting/single rod/high load

SSD2-K Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32
CMK2
ø40/ø50/ø63/ø80/ø100
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-K
Item
SSD2-KL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 500 50 to 300
SSD Cushion Rubber cushion
Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
CAT Allowable absorbed energy J 0.04 0.09 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92

MDC2 Min. stroke length with switch

Stroke length (1 or 2 switches)
MVC
Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) length (mm) length (mm) (mm)
SMG
ø12 5/10/15/20 ø12
30 10(5)
MSD/ ø16 25/30 ø16
MSDG
ø20 5/10/15/20/25 ø20
50
FC* ø25 30/35/40/45/50 ø25
ø32 5/10/15/20/25/30/ ø32
1 5
STK ø40 35/40/45/50/75/100 ø40
5
ø50 ø50
10/15/20/25 100
SRL3 ø63 ø63
30/35/40/45/50
ø80 ø80
SRG3 75/100
ø100 ø100
*1 : ‌When using the type with switch, refer to the table of the min. stroke length *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic field proof,
SRM3 with switch. T1* or T8* switch is not available.
*2 : Refer to page 789 for the min. stroke length with mounting bracket *2: Values in ( ) are for the type with 1 on rod side.
SRT3 LB.

Custom stroke length

MRL2
● SSD2-K Series
MRG2 Standard products Optional products
Item
Standard stroke length body with spacer Dedicated unit (-S)
A + stroke length
SM‑25 Model No. Refer to How to order. Add “-S” option code to the model No.
B + stroke length
A spacer is added to the standard stroke length Dedicated units of the required stroke
Description
ShkAbs body to adjust the stroke length in 1 mm increments. length are available.
Bore size Stroke range Bore size Stroke range
FJ 12/16 1 to 29 12, 16 6 to 29
Stroke range
20 to 25 1 to 49 20, 25 6 to 49
FK 32 to 100 1 to 99 32 to 100 11 to 99
Spd Model No.: SSD2-K-32-41 Model No.: SSD2-K-32-41-S
Contr Example of A +4 mm spacer is added to the SSD2-K-32-45 Dedicated units for 41 mm stroke length
model No. standard cylinder to create 41 mm stroke length. are available.
Ending B + stroke length is 88 mm. B + stroke length is 74mm.

776
 SSD2-K Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV
F2S F3S F2H/F2V F3H/F3V F3YH/F3YV
F2YV (made to order) CMA2
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green SCA2
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON)
(Lit when ON) SCS2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 CKV2
Switch specifications (T switch) CAV2/
● 1-color/2-color display/for AC magnetic field proof COVP/N2
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item
SSD2
T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable SSG
Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
SSD
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10% CAT
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green MDC2
Indicator LED Without LED
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON) MVC
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA SMG
current ≤ 2 mA at 200 VAC less
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 MSD/
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 MSDG
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1: Refer to Ending Page 1 for detailed switch specifications and dimensions. FC*
*2: Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3: The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. STK
(5 to 10 mA at 60°C)
*4: Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5: The F type switch uses a bend-resistant lead wire. SRL3
Theoretical thrust table (Unit: N)
SRG3
Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
SRM3
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
SRT3
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
Push - 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102 MRL2
ø20
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102 MRG2
ø25
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102 SM‑25
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 ShkAbs
ø40
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 FJ
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103

ø63
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103 FK
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 Spd
ø80 Contr
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100 Ending
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

777
 SSD2-K Series
SCP*3
How to order Code Description

Without switch (without magnet for switch) A Bore size (mm)

12 ø12
CMK2 SSD2-K 12 10 N LB I 16 ø16
With switch (built-in magnet for switch) 20 ø20
CMA2 SSD2-KL 12 10 T0H R N LB I 25 ø25
32 ø32
40 ø40
SCM
50 ø50
63 ø63
SCG A Bore size
80 ø80
100 ø100
SCA2 B Port thread
B Port thread Blank Rc thread
SCS2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
CKV2 C Stroke length (mm)
C Stroke length
CAV2/ Refer to the stroke length table on the following page.
COVP/N2 D Switch model No.
D Switch model No.

Contact
Lead wire Lead wire Voltage Lead Bore size
SSD2 *1 Straight L-shaped AC DC
Display
wire 12 16 20 25 32 40 50 63 80 100
*2 - F2S* ● 2-wire ● ●
SSG *3 - F3S* ● 3-wire ● ●
*8 1-color display
F2H* F2V* Proximity ● 2-wire ● ●

SSD *9 F3H* F3V* ● 3-wire ● ●

F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
CAT E Switch quantity 2-color display
F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
MDC2
Reed

F Option T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●

*4 T8H* T8V* ● ● 1-color display ● ● ● ● ●
MVC T1H* T1V* ● ● ● ● ● ● ● ● ●
2-wire
G Mounting bracket T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●

SMG *5 *6 T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●

3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
MSD/ Precautions for model No. selection T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●
Proximity

2-wire
MSDG T2YH* T2YV* ● ● ● ● ● ● ● ● ●
*1 : The T2YD* switch cannot be mounted on the ø12 and 2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●
ø16 bore sizes. 3-wire
FC* *2 : The T8* switch cannot be mounted on ø12 and ø16. T3YH* T3YV* ● ● ● ● ● ● ● ● ●
*3 : The F switch can only be mounted on the piping port T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
STK surface of bore sizes ø20 and ø25. T2YDT* - ● AC magnetic field ● ● ● ● ● ● ● ●
*4 : Piston rod of ø12 to ø25 is stainless steel as standard. ● ● ● ● ● ● ● ● ●
T2JH* T2JV* 1-color display off-delay 2-wire
C type snap ring is stainless steel instead of steel. The
SRL3 rod end male thread nut is stainless steel. * Lead wire length
*5 : The mounting bracket is included at shipment. Blank 1 m (standard)
*6 : The projection dimension of piston rod WF 3 3 m (option)
SRG3 when LB or FA is selected is different from that 5 5 m (option) *11
of the standard. Refer to the dimensions on
pages 783, 785, 787, 789 and 790. The number E Switch quantity
SRM3
of the specified protruding dimension will be R 1 on rod side
added at the end of the model No. printed on H 1 on head side
SRT3 the metal plate on the body. D 2
*7 : “I” and “Y” cannot be selected together.
*8 : The F switch with L type lead wire on ø20 models F Option
MRL2 cannot be selected on stroke lengths 10 mm or under. Bore size (ø) 12 16 20 25 32 40 50 63 80 100
*9 : Switches are shipped with the product. Contact CKD if
Blank Rod end female thread ● ● ● ● ● ● ● ● ● ●
assembling before shipment is necessary.
MRG2 N Rod end male thread ● ● ● ● ● ● ● ● ● ●
*10 : Refer to pages 750 and 751 for combinations of
variations/options. M *4 Piston rod material (stainless steel) ● ● ● ● ● ● ● ● ● ●

SM‑25 *11 : F type switch cannot be selected. P6 Copper and PTFE free Standard ● ● ● ● ● ● ● ●
S Dedicated unit for custom stroke length ● ● ● ● ● ● ● ● ● ●
[Example of model No.] P4 Specifications for ● ● ● ● ● ● ● ● ● ●
ShkAbs
SSD2-KL-12-10-T0H-R-N P40 rechargeable battery ● ● ● ● ● ● ● ● ● ●

FJ Model: Compact cylinder, high load G Mounting bracket

●
A Bore size : ø12 mm Blank Without mounting bracket

FK ●
B Port thread : Rc thread LB Axial foot

●
C Stroke length : 10mm CB Clevis bracket (pin and snap ring included)

Spd ● D Switch model No. : Reed T0H switch FA Rod side flange
FB Head side flange
Contr · Lead wire 1 m
●
E Switch quantity : 1 on rod side H Accessory (available when rod end male thread “N” is selected)
Ending ● Accessory
H
F Option : Rod end male thread I Rod eye
*7 Y Rod clevis (pin and snap ring included)
778
 SSD2-K Series
How to order
[Stroke length table] How to order switch SCP*3
Stroke length Applicable bore size
(mm) 12 16 20 25 32 40 50 63 80 100
SW T0H
CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ●
CMA2
15 ● ● ● ● ● ● ● ● ● ● Switch model No.
● ● ● ● ● ● ● ● ● ●
Standard stroke length

20 (Item D on page 778) SCM

25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ● SCA2
45 ● ● ● ● ● ● ● ●
50 ● ● ● ● ● ● ● ● SCS2
75 ● ● ● ● ● ●
100 ● ● ● ● ● ● CKV2
*1 : Less than 5 mm with 1-color display switch and less than 10 mm
with the 2-color display, off-delay, AC magnetic field proof, T1* or CAV2/
T8* switch are not available. COVP/N2
Refer to page 776 for the min. stroke length with switch.
*2 : The total length is the same as that of the next longer standard stroke SSD2
length.
*3: R
 efer to page 789 for the min. stroke length with mounting
bracket LB. SSG

SSD
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
CAT
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
MDC2
ø12 44 86 53 95 61 103 70 112 78 121 87 129 - - - - - - - - - - - -
ø16 59 104 69 114 80 125 91 136 102 147 113 158 - - - - - - - - - - - -
MVC
ø20 75 150 88 163 101 176 113 188 126 201 138 213 151 226 163 238 176 251 188 263 - - - -
ø25 102 193 118 209 134 225 150 241 165 256 182 273 198 289 214 305 230 321 246 337 - - - - SMG
ø32 167 281 188 302 209 323 231 345 253 367 275 389 297 411 318 432 340 454 361 475 534 583 642 690
MSD/
ø40 236 379 263 406 290 433 316 459 342 485 369 512 396 539 422 565 449 592 475 618 702 751 834 883
MSDG
ø50 - - 425 619 467 661 510 704 553 747 594 788 636 830 678 872 720 914 762 956 1109 1166 1319 1376
ø63 - - 617 896 672 951 727 1006 782 1061 838 1117 893 1172 948 1227 1003 1282 1058 1337 1548 1612 1823 1887 FC*
ø80 - - 1101 1514 1188 1601 1274 1687 1361 1774 1448 1861 1535 1948 1621 2034 1708 2121 1794 2207 2574 2640 3006 3072
ø100 - - 1660 2227 1774 2341 1888 2455 2002 2569 2115 2682 2229 2796 2343 2910 2457 3024 2571 3138 3636 3708 4206 4278 STK

SRL3

SRG3
How to order mounting bracket
Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 SRM3
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
SRT3
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100 MRL2
*1: The foot mounting bracket is provided as 2 pcs./set.
MRG2

SM‑25
Specifications for rechargeable battery (catalog No. CC-1226A)
ShkAbs
● Design compatible with rechargeable battery manufacturing process

SSD2-K-………- P4* FJ

FK
Spd
Contr

Ending

779
 SSD2-K Series
SCP*3
Internal structure and parts list
● SSD2-KL-12 to 25 (double acting/single rod/with switch) ● SSD2-KL-32 (double acting/single rod high load/with switch)
CMK2
1 2 3 4 5 6 1 2 4 3 5 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2 12 13 7 8 9 10 15 14 11
12 6 13 7 8 15 14

SSG
● SSD2-K-12 to 25 (double acting/single rod high load) ● SSD2-K-32 (double acting/single rod high load)
SSD
1 2 3 4 5 1 2 3 5 10 9 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
6 12 13 9 10 15 14 11
SRG3 12 6 13 15 14

No. Part name Material Remarks No. Part name Material Remarks
SRM3 ø12 to ø25: Stainless steel ø16 to ø32 9 Piston Aluminum alloy Chromate
1 Piston rod
ø32: Steel Industrial chrome plating 10 Piston packing Nitrile rubber
SRT3 2 C type snap ring Steel Zinc phosphate ø12 to ø25: Stainless steel
11 Cover ø32: Alumite
3 Rod metal Special aluminum Alumite (*2) ø32: Aluminum alloy
MRL2 4 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet ø20 to ø32 (*1)
5 Body Aluminum alloy Hard alumite 13 Cushion rubber (R) Urethane rubber
MRG2 6 Rod packing Nitrile rubber 14 Cushion rubber (H) Urethane rubber
7 Spacer Aluminum alloy Chromate 15 Wear ring Polyacetal resin
SM‑25 8 Magnet Plastic
*1: Material is steel for copper and PTFE free specifications.
ShkAbs *2: Chromate-coated for ø32.

FJ
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FK
ø12 SSD2-K-12K
Spd ø16 SSD2-K-16K
4 6 10
Contr ø20 SSD2-K-20K
13 14 15
ø25 SSD2-K-25K
Ending ø32 SSD2-K-32K

780
 SSD2-K Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-KL-40 to 100 (double acting/single rod/with switch)
CMK2
1 6 2 3 4 5 7 8 9 10 15 14
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
12 13 11
SSG
● SSD2-K-40 to 100 (double acting/single rod high load)
SSD
1 2 3 4 5 6 13 9 10 15 14 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
12
SRG3
No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod Steel Industrial chrome plating 9 Piston Aluminum alloy Chromate SRM3
2 C snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber
3 Rod metal Aluminum alloy Alumite (*2) 11 Cover Aluminum alloy Alumite SRT3
4 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet *1
5 Body Aluminum alloy Hard alumite 13 Cushion rubber (R) Urethane rubber MRL2
6 Rod packing Nitrile rubber 14 Cushion rubber (H) Urethane rubber
7 Spacer Aluminum alloy 15 Wear ring Polyacetal resin MRG2
8 Magnet Plastic
*1: Material is steel for copper and PTFE free specifications.
SM‑25
*2: Chromate-coated for ø40 and ø50.
ShkAbs
Repair parts list FJ
Bore size (mm) Kit No. Repair parts No.
ø40 SSD2-K-40K
FK
ø50 SSD2-K-50K
4 6 10
ø63 SSD2-K-63K Spd
13 14 15
ø80 SSD2-K-80K Contr
ø100 SSD2-K-100K
Ending

781
 SSD2-K Series
SCP*3
Dimensions
● SSD2-KL-12 to 25 (with switch) ● Rod end male thread
CMK2 ø12/ø16 *4
FA A + stroke length a' wf
CMA2 F WF B + stroke length c'
T
N
SCM C D

øMM
8-J
2-EE
Mounting hole
KK
SCG
HD

SCA2 KK'

øMM
N
F

Width across
øK flats M

FA
FB
Width across flats H
SCS2
RD øI
M
CKV2 8-KA

CAV2/ ø20/ø25 *4
COVP/N2 FA A + stroke length
F WF B + stroke length
SSD2
N C D
8-J
SSG 2-EE
Mounting hole
KK
SSD HD

CAT
øMM
FB
N
F

MDC2 øK

MVC
øI
RD
M
SMG 8-KA

MSD/ · Precautions regarding the switch mounting groove

MSDG *1: Only F switch is available for the ø20 or ø25 piping port surface.

FC* Code Common dimensions with switch

Bore size (mm) A *1 B *1 C D EE F FA *3 FB I J K KA KK M MM N WF
ø12 30.5 27 5.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
STK
ø16 30.5 27 5.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 39 34.5 8 5.5 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRL3 ø25 42.5 37.5 11 6 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
SRG3 Switch dimensions T5H/T5V T3H/T3V T3WH T3WV F2YH/F2YV, F3YH/F3YV
Proximity F2S/F3S

Bore size (mm) HD RD HD RD HD RD HD RD HD RD

SRM3 ø12 4.5 3.5 4.5 3.5 6.5 5.5
ø16 3 5 3 5 5 7
SRT3 ø20 6.5 9 6.5 9 8.5 11 11 13.5 10 12.5
ø25 6 12.5 6 12.5 8 14.5 10.5 17 9.5 16
MRL2 *1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
MRG2 · For ø16: A + stroke length = 40.5 B + stroke length = 37
When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
SM‑25 · For ø16: A + stroke length = 37.5 B + stroke length = 34
*2 : Refer to page 1045 for HD and RD dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
*3 : Refer to page 1045 for protruding dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
ShkAbs *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
FJ
● Dimensions of rod end male thread part
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

782
 SSD2-K Series
Double acting/single rod/high load
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-KL-12 to 25 -LB SSD2-KL-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

CD
TR
AU socket bolt 8-G
N
SCA2

H
10
4-øAB AK CJ + stroke length
TS Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5
-0.1
10 -0.3 CAT
-0.1
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.4
-0.1
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.3
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.1
20 -0.3 MDC2
Code Male thread Code Female thread Male thread
Bore size Bore size
WF LF A B LX a’ wf LF A B LX (mm)
WF A B CJ a’ wf A B CJ MVC
(mm)
ø12 13.5 19.5 45.3 27 15 10.5 13.5 19.5 55.8 27 15 ø12 3.5 50.5 27 44.5 10.5 3.5 61 27 44.5
ø16 13.5 19.5 45.3 27 15 12 13.5 19.5 57.3 27 15 ø16 3.5 51.5 27 45.5 12 3.5 63.5 27 45.5
SMG
ø20 14.5 20.5 56.2 34.5 22.5 14 14.5 20.5 70.2 34.5 22.5 ø20 4.5 66 34.5 57 14 4.5 80 34.5 57
ø25 15 22.5 59.7 37.5 22.5 17.5 15 22.5 77.2 37.5 22.5 ø25 5 72.5 37.5 62.5 17.5 5 90 37.5 62.5
MSD/
MSDG
● Rod side flange (FA) with switch ● Head side flange (FB) with switch
SSD2-KL-12 to 25 -FA SSD2-KL-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size ShkAbs
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size Bore size Spd
WF A B a’ wf A B WF A B a’ wf A B
(mm) (mm)
ø12 13.5 40.5 27 10.5 13.5 51 27 ø12 3.5 36 27 10.5 3.5 46.5 27 Contr
ø16 13.5 40.5 27 12 13.5 52.5 27 ø16 3.5 36 27 12 3.5 48 27
ø20 14.5 49 34.5 14 14.5 63 34.5 ø20 4.5 47 34.5 14 4.5 61 34.5 Ending
ø25 15 52.5 37.5 17.5 15 70 37.5 ø25 5 50.5 37.5 17.5 5 68 37.5

783
 SSD2-K Series
SCP*3
Dimensions
● SSD2-K-12 to 25 (without switch) ● Rod end male thread
CMK2

CMA2 ø12/ø16 A + stroke length

F a' wf
WF B + stroke length
SCM c'
N C D T
8-J
2-EE

øMM
SCG Mounting hole KK

SCA2

øMM
F

KK'
SCS2 Width across
øK
flats M
Width across flats H
CKV2
M 8-KA øI
CAV2/
COVP/N2

SSD2
ø20/ø25 A + stroke length
SSG
F WF B + stroke length

SSD N C D
8-J 2-EE
Mounting hole
CAT KK

MDC2
øMM
F

MVC
øK
SMG
MSD/ øI
8-KA
MSDG M

FC*

STK

SRL3
Code Dimensions without switch and common dimensions
SRG3 Bore size (mm) A *1 B *1 C D EE F I J K KA KK M MM N WF
ø12 25.5 22 5.5 5.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5

SRM3 ø16 25.5 22 5.5 5.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 29 24.5 8 5.5 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRT3 ø25 32.5 27.5 11 6 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
MRL2
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
· For ø16: A + stroke length = 35.5 B + stroke length = 32
MRG2 When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø16: A + stroke length = 32.5 B + stroke length = 29
*2 : For dimensions with accessories and of individual accessories, refer to pages 1046 to 1049.
SM‑25
● Dimensions of rod end male thread part
ShkAbs
Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
FJ
ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
FK
ø20 14 12 13 M8 8 10 5 4.5
Spd ø25 17.5 15 17 M10×1.25 10 12 6 5
Contr

Ending

784
 SSD2-K Series
Double acting/single rod/high load
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch ● Clevis bracket (CB) without switch
SSD2-K-12 to 25 -LB SSD2-K-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

SCA2

CD
AU socket bolt 8-G
TR N

H
4-øAB

10
TS AK CJ + stroke length
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3 CAT
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
MDC2
-0.3
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 0
+0.2
14 10 5 40 M6×16 C5 28 20 -0.1
-0.3

Code Male thread Code Female thread Male thread

Bore size Bore size
(mm)
WF LF A B LX a’ wf LF A B LX
(mm)
WF A B CJ a’ wf A B CJ MVC
ø12 13.5 19.5 40.3 22 10 10.5 13.5 19.5 50.8 22 10 ø12 3.5 45.5 22 39.5 10.5 3.5 56 22 39.5
ø16 13.5 19.5 40.3 22 10 12 13.5 19.5 52.3 22 10 ø16 3.5 46.5 22 40.5 12 3.5 58.5 22 40.5 SMG
ø20 14.5 20.5 46.2 24.5 12.5 14 14.5 20.5 60.2 24.5 12.5 ø20 4.5 56 24.5 47 14 4.5 70 24.5 47
ø25 15 22.5 49.7 27.5 12.5 17.5 15 22.5 67.2 27.5 12.5 ø25 5 62.5 27.5 52.5 17.5 5 80 27.5 52.5
MSD/
MSDG
● Rod side flange (FA) without switch ● Head side flange (FB) without switch
SSD2-K-12 to 25 -FA SSD2-K-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size ShkAbs
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16
FK
Code Female thread Male thread Code Female thread Male thread
Bore size Bore size
(mm)
WF A B a’ wf A B
(mm)
WF A B a’ wf A B Spd
ø12 13.5 35.5 22 10.5 13.5 46 22 ø12 3.5 31 22 10.5 3.5 41.5 22 Contr
ø16 13.5 35.5 22 12 13.5 47.5 22 ø16 3.5 31 22 12 3.5 43 22
ø20 14.5 39 24.5 14 14.5 53 24.5 ø20 4.5 37 24.5 14 4.5 51 24.5 Ending
ø25 15 42.5 27.5 17.5 15 60 27.5 ø25 5 40.5 27.5 17.5 5 58 27.5

785
 SSD2-K Series
SCP*3
Dimensions
● SSD2-KL-32 to 100 (with switch) ● Rod end male thread
CMK2
a' wf
CMA2 c'
F T
SCM

øMM
N
A + stroke length
SCG WF B + stroke length
H
C D KK'
SCA2 2-EE
Width across
8-J
flats M
O

Mounting hole
SCS2 Width across flats H
KK
HD
CKV2 øMM

CAV2/
FB
G
F

RD
COVP/N2

SSD2
øK
SSG 8-KA ø1
M

SSD FA
*5

CAT
Code Common dimensions with switch
MDC2 Bore size (mm) A *1 B *1 C D EE F FA *5 FB G H I J K KA KK M MM N O WF
9 spot face
ø32 50 43 8 8 Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 7
MVC ø40 56.5 49.5 12 8.5 Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face
depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7
11 spot face
ø50 58.5 50.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8
SMG ø63 64 56 13 11 Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face
103 M10 depth 25 M10 depth 15 17 20 60 7 8
depth 9
17.5 spot face
ø80 73.5 63.5 16 13 Rc3/8 98 49.5(53) 28.5 104 31 10.5 132 M12 depth 28 M16 depth 21 22 25 77 6 10
MSD/ depth 11
17.5 spot face
MSDG ø100 85 73 23 15 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12
Switch dimensions Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
FC* Bore size (mm) HD RD HD RD HD RD
ø32 9 15 9 15 11 17
STK ø40 9.5 19.5 9.5 19.5 11 21
ø50 10 20 10 20 11.5 21.5
SRL3 ø63 17.5 18 17.5 18 19 19.5
ø80 22 20.5 22.5 20.5 24 22
SRG3
ø100 28 24.5 28 24.5 29.5 26
*1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
SRM3 length) to the stroke length value.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
SRT3 · For ø40: A + stroke length = 60 B + stroke length = 53
When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø40: A + stroke length = 57 B + stroke length = 50
MRL2 *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1045 for HD and RD dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
MRG2 *4 : Refer to page 1045 for protruding dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
*5 : Dimensions in ( ) of FA are for the radial lead wire.
*6 : For dimensions with accessories and of individual accessories, refer to pages 1046 to 1049.
SM‑25

ShkAbs
● Dimensions of rod end male thread part
Code
FJ a’ c’ H kk’ M MM T wf
Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5
FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Spd ø50 28.5 26 27 M18×1.5 17 20 11 5
Contr ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending ø100 35.5 32.5 41 M26×1.5 27 30 16 8

786
 SSD2-K Series
Double acting/single rod/high load
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-KL-32 to 100 -LB SSD2-KL-32 to 100 -CB CMK2
A + stroke length A + stroke length UB -0.1
-0.3

WF B + stroke length M WF B + stroke length D

CC
CB +0.4
+0.2 CMA2

MR
SCM
R
AG

SCG

E
N
AH
AT
AD

CD
AE

H1
AU Low head hexagon socket bolt 4-G AC SCA2

0
N
TR 4-øAB AK CJ + stroke length Mounting bolt 4-G N
TS LF LX + stroke length E
Rod end male thread
SCS2
A + stroke length
Rod end male thread A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length CKV2
CAV2/
COVP/N2

SSD2

LF CJ + stroke length SSG

Code Common dimensions Female thread Code Common dimensions
Bore size AB AD AE AG AH AK AT AU G N TR TS
Bore size
AC CB CC CD D E G MR N UB SSD
(mm) (mm)
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 ø40 5 18.2 14 10 6 52 M6×16 10 40 36
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 ø50 6 22.2 20 14 7 64 M8×20 14 50 44 CAT
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 ø63 7 22.2 20 14 8 77 M10×25 14 60 44
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 ø80 9 28.2 27 18 10 98 M12×40 18 77 56
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 ø100 12 32.2 31 22 13 117 M12×40 22 94 64
MDC2
Code Male thread Code Female thread Male thread
Bore size Bore size
M WF LF A B LX a’ wf LF A B LX WF A B CJ a’ wf A B CJ
(mm) (mm)
ø32 7 80 43 70 23.5 5 101.5 43 68
MVC
ø32 7.2 17 25 67.2 43 27 23.5 15 23 88.7 43 27
ø40 7.2 17 25 73.7 49.5 33.5 23.5 15 23 95.2 49.5 33.5 ø40 7 88.5 49.5 78.5 23.5 5 110 49.5 76.5
ø50 8.2 18 29.5 76.7 50.5 27.5 28.5 15 26.5 102.2 50.5 27.5 ø50 8 100.5 50.5 86.5 28.5 5 126 50.5 83.5
ø63 9.2 18 31 83.2 56 30 28.5 15 28 108.7 56 30 ø63 8 108 56 94 28.5 5 133.5 56 91 SMG
ø80 11.5 20 35 95 63.5 33.5 35.5 18 33 128.5 63.5 33.5 ø80 10 129.5 63.5 111.5 35.5 8 163 63.5 109.5
ø100 13 22 39 108 73 39 35.5 18 35 139.5 73 39 ø100 12 152 73 130 35.5 8 183.5 73 126
MSD/
* A pin and a snap ring are included. MSDG
● Rod side flange (FA) ● Head side flange (FB)
SSD2-KL-32 to 100 -FA SSD2-KL-32 to 100 -FB FC*
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
N 4-FD WF B + stroke length FT N 4-FD
STK
FT

SRL3
FH
FC

FH
FC

SRG3
Mounting bolt 4-G
Mounting bolt 4-G SRM3
ø32 to ø63: Hexagon socket button head bolt Rod end male thread
ø80/ø100: Special bolt A + stroke length ø32 to ø63: Hexagon socket button head bolt
A + stroke length ø80/ø100: Special bolt
Rod end male thread a’ wf B + stroke length SRT3
a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size FC FD FH FL FM FT N G Bore size FC FD FH FL FM FT N G
(mm)
ø32 34 5.5 48 56 65 8 34 M6×16
(mm)
ø32 34 5.5 48 56 65 8 34 M6×16
ShkAbs
ø40 40 5.5 54 62 72 8 40 M6×16 ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20 ø50 50 6.6 67 76 89 9 50 M8×20
ø63 60 9 80 92 108 9 60 M10×25 ø63 60 9 80 92 108 9 60 M10×25 FJ
ø80 77 11 99 116 134 11 77 M12×40 ø80 77 11 99 116 134 11 77 M12×40
ø100 94 11 117 136 154 11 94 M12×40 ø100 94 11 117 136 154 11 94 M12×40
Code Female thread Male thread Code Female thread Male thread FK
Bore size WF A B a’ wf A B Bore size
(mm) WF A B a’ wf A B
(mm)
ø32 17 60 43 23.5 15 81.5 43 ø32 7 58 43 23.5 5 79.5 43 Spd
ø40 17 66.5 49.5 23.5 15 88 49.5 ø40 7 64.5 49.5 23.5 5 86 49.5 Contr
ø50 18 68.5 50.5 28.5 15 94 50.5 ø50 8 67.5 50.5 28.5 5 93 50.5
ø63 18 74 56 28.5 15 99.5 56 ø63 8 73 56 28.5 5 98.5 56
ø80 20 83.5 63.5 35.5 18 117 63.5 ø80 10 84.5 63.5 35.5 8 118 63.5 Ending
ø100 22 95 73 35.5 18 126.5 73 ø100 12 96 73 35.5 8 127.5 73

787
 SSD2-K Series
SCP*3
Dimensions
● SSD2-K-32 to 100 (without switch) ● Rod end male thread
CMK2

CMA2 a' wf
c'
F T
SCM

øMM
N
SCG A + stroke length

H WF B + stroke length
SCA2 C D KK'
2-EE Width across
8-J flats M
SCS2
O

Mounting hole Width across flats H

KK
CKV2
CAV2/
COVP/N2
øMM
G
F

SSD2

SSG øK
8-KA ø1
SSD M

CAT

MDC2
Code Dimensions without switch and common dimensions
*1, *3 *1, *3

MVC Bore size (mm) A B C D EE F G H I J K KA KK

ø32 40(50) 33(43) 8 8 Rc1/8 45 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13
ø40 46.5(56.5) 39.5(49.5) 12 8.5 Rc1/8 52 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
SMG
ø50 48.5(58.5) 40.5(50.5) 10.5 10.5 Rc1/4 64 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
MSD/ ø63 54(64) 46(56) 13 11 Rc1/4 77 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15
MSDG ø80 63.5(73.5) 53.5(63.5) 16 13 Rc3/8 98 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21
ø100 75(85) 63(73) 23 15 Rc3/8 117 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27
FC*
Code Dimensions without switch and common dimensions
STK Bore size (mm) M MM N O WF
ø32 14 16 34 4.5 7

SRL3 ø40 14 16 40 5 7
ø50 17 20 50 7 8

SRG3 ø63 17 20 60 7 8
ø80 22 25 77 6 10

SRM3 ø100 27 30 94 6.5 12

*1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
SRT3 (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
· For ø40: A + stroke length = 50 B + stroke length = 43
MRL2 When you have selected “S” (dedicated unit for custom stroke length), apply the custom stroke length of 7 mm.
· For ø40: A + stroke length = 47 B + stroke length = 40
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.
MRG2 *3 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.

SM‑25 ● Dimensions of rod end male thread part

Code
a’ c’ H kk’ M MM T wf
ShkAbs Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5
FJ ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5
FK ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Spd
Contr ø100 35.5 32.5 41 M26×1.5 27 30 16 8

Ending

788
 SSD2-K Series
Double acting/single rod/high load
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch
SSD2-K-32 to 100 -LB CMK2
Rod end male thread
CMA2
A + stroke length
A + stroke length a’ wf B + stroke length
WF B + stroke length M SCM

SCG
AG

SCA2
AH
AT
AD
AE

AU Low head hexagon socket bolt 4-G LF SCS2

N
TR 4-øAB AK
TS LF LX + stroke length CKV2
CAV2/
COVP/N2
Code Common dimensions Female thread
Bore size (mm) AB AD AE AG AH AK AT AU G N TR TS M WF LF A B SSD2
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 17 25 57.2(67.2) 33(43)
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 17 25 63.7(73.7) 39.5(49.5) SSG
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 18 29.5 66.7(76.7) 40.5(50.5)
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 18 31 73.2(83.2) 46(56) SSD
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 20 35 85(95) 53.5(63.5)
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 22 39 98(108) 63(73) CAT
Code Male thread Note: ø80: LB cannot be selected for 15 mm
Bore size (mm) LX a’ wf LF A B LX stroke length or less. MDC2
ø32 17(27) 23.5 15 23 78.7(88.7) 33(43) 17(27)
ø40 23.5(33.5) 23.5 15 23 85.2(95.2) 39.5(49.5) 23.5(33.5)
MVC
ø50 17.5(27.5) 28.5 15 26.5 92.2(102.2) 40.5(50.5) 17.5(27.5)
ø63 20(30) 28.5 15 28 98.7(108.7) 46(56) 20(30)
SMG
ø80 23.5(33.5) 35.5 18 33 118.5(128.5) 53.5(63.5) 23.5(33.5) MSD/
ø100 29(39) 35.5 18 35 129.5(139.5) 63(73) 29(39) MSDG
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
FC*

STK
● Clevis bracket (CB) without switch
SSD2-K-32 to 100 -CB
SRL3

Rod end male thread SRG3

A + stroke length UB -0.1
-0.3
A + stroke length
WF B + stroke length D CB +00.2
CC a’ wf B + stroke length
SRM3
MR
R
SRT3
E
N

MRL2
CD
H1

AC
0

CJ + stroke length
N
CJ + stroke length Mounting bolt 4-G
E
MRG2

SM‑25
Code Common dimensions Female thread Male thread
ShkAbs
Bore size (mm) AC CB CC CD D E G MR N UB WF A B CJ a' wf A B CJ
ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36 7 70(80) 33(43) 60 23.5 5 91.5(101.5) 33(43) 58
FJ
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 78.5(88.5) 39.5(49.5) 68.5 23.5 5 100(110) 39.5(49.5) 66.5
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 90.5(100.5) 40.5(50.5) 76.5 28.5 5 116(126) 40.5(50.5) 73.5
FK
ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 98(108) 46(56) 84 28.5 5 123.5(133.5) 46(56) 81
ø80 9 28.2 27 18 10 98 M12×40 18 77 56 10 119.5(129.5) 53.5(63.5) 101.5 35.5 8 153(163) 53.5(63.5) 99.5 Spd
ø100 12 32.2 31 22 13 117 M12×40 22 94 64 12 142(152) 63(73) 120 35.5 8 173.5(183.5) 63(73) 116 Contr
*1 Dimensions in ( ) are for stroke lengths of more than 50 mm.
*2 A pin and a snap ring are included. Ending

789
 SSD2-K Series
SCP*3
Dimensions with mounting bracket
● Rod side flange (FA) without switch
CMK2 SSD2-K-32 to 100 -FA

CMA2 Rod end male thread

FM A + stroke length A + stroke length

SCM FL WF B + stroke length a’ wf B + stroke length
N 4-FD FT FT
SCG

SCA2
FH
FC

SCS2 Mounting bolt 4-G

ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
CKV2
CAV2/
COVP/N2
Code Common dimensions Female thread Male thread
SSD2
Bore size (mm) FC FD FH FL FM FT N G WF A B a’ wf A B
ø32 34 5.5 48 56 65 8 34 M6×16 17 50(60) 33(43) 23.5 15 71.5(81.59) 33(43)
SSG
ø40 40 5.5 54 62 72 8 40 M6×16 17 56.5(66.5) 39.5(49.5) 23.5 15 78(88) 39.5(49.5)
ø50 50 6.6 67 76 89 9 50 M8×20 18 58.5(68.5) 40.5(50.5) 28.5 15 84(94) 40.5(50.5)
SSD
ø63 60 9 80 92 108 9 60 M10×25 18 64(74) 46(56) 28.5 15 89.5(99.5) 46(56)
ø80 77 11 99 116 134 11 77 M12×40 20 73.5(83.5) 53.5(63.5) 35.5 18 107(117) 53.5(63.5)
CAT
ø100 94 11 117 136 154 11 94 M12×40 22 85(95) 63(73) 35.5 18 116.5(126.5) 63(73)
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
MDC2

MVC

SMG
MSD/ ● Head side flange (FB) without switch
MSDG SSD2-K-32 to 100 -FB

FC*
Rod end male thread
FM
STK A + stroke length FL A + stroke length
WF B + stroke length FT N 4-FD a’ wf B + stroke length FT
SRL3

SRG3
FH
FC

SRM3
Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt
SRT3 ø80/ø100: Special bolt

MRL2
Code Common dimensions Female thread Male thread
MRG2 Bore size (mm) FC FD FH FL FM FT N G WF A B a' wf A B
ø32 34 5.5 48 56 65 8 34 M6×16 7 48(58) 33(43) 23.5 5 69.5(79.5) 33(43)
SM‑25 ø40 40 5.5 54 62 72 8 40 M6×16 7 54.5(64.5) 39.5(49.5) 23.5 5 76(86) 39.5(49.5)
ø50 50 6.6 67 76 89 9 50 M8×20 8 57.5(67.5) 40.5(50.5) 28.5 5 83(93) 40.5(50.5)
ShkAbs ø63 60 9 80 92 108 9 60 M10×25 8 63(73) 46(56) 28.5 5 88.5(98.5) 46(56)
ø80 77 11 99 116 134 11 77 M12×40 10 74.5(84.5) 53.5(63.5) 35.5 8 108(118) 53.5(63.5)
FJ ø100 94 11 117 136 154 11 94 M12×40 12 86(96) 63(73) 35.5 8 117.5(127.5) 63(73)
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
FK
Spd
Contr

Ending

790
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

791
 Compact cylinder double acting/single rod/long stroke length

SSD2 Series (long stroke length)

SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32
CMK2
ø40/ø50/ø63/ø80/ø100
JIS symbol
CMA2

SCM
Specifications
SCG SSD2
Item
SSD2-L (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 500 50 to 300
SSD Cushion Rubber cushion
Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
CAT Allowable absorbed energy J 0.04 0.09 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92

MDC2
Stroke length
MVC
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm)
SMG ø12
35/40/45/50/75/100 100
ø16
MSD/ ø20 75/100/125/150/175/200 200
MSDG
ø25 75/100/125/150/175/200/250/300
FC* ø32
ø40
STK ø50 300
125/150/175/200/250/300
ø63
SRL3 ø80
ø100
SRG3

SRM3 Custom stroke length

● SSD2 Series
SRT3 Standard products
Item
Standard stroke length body with spacer A + stroke length
MRL2 Model No. Refer to How to order.
B + stroke length
A spacer is added to the standard stroke length body to adjust the
MRG2 Description
stroke length in 1 mm increments.
Bore size Stroke range
SM‑25
12/16 31 to 99
ShkAbs Stroke range 20 51 to 199
25 51 to 299
FJ 32 to 100 101 to 299
Model No.: SSD2-32-121
FK A +4 mm spacer is added to the SSD2-32-125 standard cylinder
Example of model No.
to create 121 mm stroke length.
Spd
Contr B + stroke length is 170.5mm.

Ending

792
 SSD2 (Long stroke length) Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F3PH/F3PV
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order) CMA2
Dedicated for For programmable Dedicated for
Applications For programmable controller, relay
programmable controller controller, relay programmable controller
Output method - NPN output - NPN output PNP output NPN output
SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green SCA2
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) (Lit when ON) SCS2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 CKV2
Switch specifications (T switch) CAV2/
● 1-color/2-color display/for AC magnetic field proof
COVP/N2
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4) SSD2
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For SSG
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
SSD
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC -
CAT
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
MDC2
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without LED
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED MVC
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON)
Leakage ≤ 1 mA at 100 VAC, 1 mA or SMG
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less
MSD/
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 MSDG
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 FC*
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. STK
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. SRL3
*5 : The F type switch uses a bend-resistant lead wire.
Theoretical thrust table (Unit: N) SRG3
Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SRM3
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8 SRT3
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102 MRL2
Push - 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102 MRG2
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
SM‑25
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ShkAbs
ø40
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 FJ
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103 FK
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103
Spd
ø80 Contr
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100 Ending
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

793
 SSD2 (Long stroke length) Series
SCP*3
How to order Code Description

Without switch (without magnet for switch) A Bore size (mm)

12 ø12
CMK2 SSD2 12 100 N LB I 16 ø16
With switch (built-in magnet for switch) 20 ø20
CMA2 SSD2-L 12 100 T0H R N LB I 25 ø25
32 ø32
SCM 40 ø40
50 ø50
A Bore size 63 ø63
SCG
80 ø80
100 ø100
SCA2
B Port thread
B Port thread Blank Rc thread
SCS2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
CKV2 C Stroke length (mm)
C Stroke length
CAV2/ Refer to the stroke length table on the following page.
COVP/N2 D Switch model No.
D Switch model No. Lead wire Lead wire Lead Bore size

Contact
Voltage
SSD2 Display
*1 Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
*2 - F2S* ● 2-wire ● ●
SSG *3 - F3S* ● 3-wire ● ●
*8 1-color display
F2H* F2V* Proximity ● 2-wire ● ●
SSD F3H* F3V* ● 3-wire ● ●
F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
CAT E Switch F2YH* F2YV* ● 2-wire ● ●
2-color display
quantity F3YH* F3YV* ● 3-wire ● ●

MDC2 T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●

Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●

F Option T8H* T8V* ● ● 1-color display ● ● ● ● ● ● ● ●
MVC *4 T1H* T1V* ● ● ● ● ● ● ● ● ●
2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●
SMG G Mounting bracket T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
*5 3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
MSD/ *6 T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●
Proximity

MSDG 2-wire
Precautions for model No. selection T2YH* T2YV* ●
2-color display
● ● ● ● ● ● ● ●

FC* T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●

*1 : The T2YD* switch cannot be mounted on the ø12 and 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
ø16 bore sizes.
T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
STK *2 : The T8* switch cannot be mounted on ø12 and ø16. 2-wire
*3 : The F type switch can only be mounted on the piping T2YDT* - ● AC magnetic field ● ● ● ● ● ● ● ●
port surface of bore sizes ø20 and ø25. T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
SRL3 *4 : Piston rod of ø12 to ø25 is stainless steel as standard. * Lead wire length
C type snap ring is stainless steel instead of steel. The Blank 1 m (standard)
SRG3 rod end male thread nut is stainless steel.
3 3 m (option)
*5 : The mounting bracket is included at shipment.
5 5 m (option) *10
*6 : The projection dimension of piston rod WF when
SRM3 LB or FA is selected is different from that of the E Switch quantity
standard. Refer to the dimensions on pages 799 R 1 on rod side
and 801. The number of the specified protruding
SRT3 dimension will be added at the end of the model
H 1 on head side
No. printed on the metal plate on the body. D 2
MRL2 *7 : “I” and “Y” cannot be selected together. F Option
*8 : Switches are shipped with the product. Contact CKD if
Bore size (ø) 12 16 20 25 32 40 50 63 80 100
assembling before shipment is necessary.
MRG2 *9 : Refer to pages 750 and 751 for combinations of Blank Rod end female thread ● ● ● ● ● ● ● ● ● ●

variations/options. N Rod end male thread ● ● ● ● ● ● ● ● ● ●

*10 : F type switch cannot be selected. M *4 Piston rod material (stainless steel) ● ● ● ● ● ● ● ● ● ●
SM‑25
P6 Copper and PTFE free Standard ● ● ● ● ● ● ● ●
[Example of model No.] P4 Specifications for ● ● ● ● ● ● ● ● ● ●
ShkAbs P40 rechargeable battery ● ● ● ● ● ● ● ● ● ●
SSD2-L-12-100-T0H-R-N
Model: Compact cylinder, long stroke length G Mounting bracket
FJ
●
A Bore size : ø12 mm
Blank Without mounting bracket

FK ●
B Port thread : Rc thread
LB Axial foot

●
C Stroke length : 100mm CB Clevis bracket (pin and snap ring included)

Spd ● D Switch model No. : Reed T0H switch

FA Rod side flange
FB Head side flange
Contr · Lead wire 1 m
●
E Switch quantity : 1 on rod side H Accessory (available when rod end male thread “N” is selected)
Ending ● Accessory
F Option H
: Rod end male thread I Rod eye
*7 Y Rod clevis (pin and snap ring included)
794
 SSD2 (Long stroke length) Series
How to order
[Stroke length table] How to order switch SCP*3
Stroke length Applicable bore size
(mm) ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
SW T0H
CMK2
35 ● ●
40 ● ●
CMA2
45 ● ● Switch model No.
● ●
Standard stroke length

50 (Item D on page 794) SCM

75 ● ● ● ●
100 ● ● ● ● SCG
125 ● ● ● ● ● ● ● ●
150 ● ● ● ● ● ● ● ● SCA2
175 ● ● ● ● ● ● ● ●
200 ● ● ● ● ● ● ● ● SCS2
250 ● ● ● ● ● ● ●
300 ● ● ● ● ● ● ● CKV2
Max. stroke length (mm) 100 200 300
Custom stroke length *1 In 1 mm increments CAV2/
COVP/N2
*1: ‌The total length is the same as that of the next longer standard stroke
length.
SSD2

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) SSG
Stroke length (mm) 35 40 45 50 75 100 125 150 175 200 250 300
SSD
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 144 146 153 155 161 163 170 172 212 214 255 257 - - - - - - - - - - - -
CAT
ø16 179 180 190 191 201 202 212 213 267 268 322 323 - - - - - - - - - - - -
ø20 - - - - - - - - 321 326 383 388 446 451 508 513 571 576 633 638 - - - - MDC2
ø25 - - - - - - - - 412 417 492 497 572 577 652 657 732 737 812 817 972 977 1132 1137
ø32 - - - - - - - - - - - - 790 799 897 905 1003 1012 1111 1119 1326 1334 1541 1549 MVC
ø40 - - - - - - - - - - - - 1000 1016 1133 1148 1265 1281 1398 1413 1663 1678 1928 1943
ø50 - - - - - - - - - - - - 1553 1571 1779 1796 2004 2022 2217 2234 2642 2659 3067 3084 SMG
ø63 - - - - - - - - - - - - 2138 2162 2413 2437 2688 2712 2963 2987 3512 3536 4062 4086
MSD/
ø80 - - - - - - - - - - - - 3478 3505 3911 3937 4343 4370 4776 4802 5640 5666 6505 6531 MSDG
ø100 - - - - - - - - - - - - 4816 4848 5386 5418 5956 5988 6526 6558 7667 7699 8807 8839
FC*

STK

How to order mounting bracket SRL3

Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 SRG3
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
SRM3
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
SRT3
*1: The foot mounting bracket is provided as 2 pcs./set.

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

795
 SSD2 (Long stroke length) Series
SCP*3
Internal structure and parts list

CMK2 ● SSD2 (long stroke length) -L-12, 16 ● SSD2 (long stroke length) -L-20 to 100
(double acting/single rod/with switch) (double acting/single rod/with switch) ø20: Over 100 to 200 mm stroke length
CMA2 ø25: Over 150 to 300 mm stroke length
ø32 to ø50: Over 150 to 300 mm stroke length
SCM ø63 to ø100: Over 200 to 300 mm stroke length

SCG 1 2 3 4 6 5 7 8 9 1 2 3 4 6 5 7 8 9 1 2 3 4 6 5 7 8 9

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
13 10 15 14 11 12 13 10 15 14 11 12 13 10 15 14 11
SSG

SSD
● SSD2 (long stroke length) -12, 16 ● SSD2 (long stroke length) -20 to 100
CAT (double acting/single rod) (double acting/single rod) ø20: Over 100 to 200 mm stroke length
ø25: Over 150 to 300 mm stroke length
MDC2 ø32 to ø50: Over 150 to 300 mm stroke length
ø63 to ø100: Over 200 to 300 mm stroke length
MVC
1 2 3 4 6 5 7 9 1 2 3 4 6 5 7 9 1 2 3 4 6 5 7 9

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3 13 10 15 14 11 12 13 10 15 14 11 12 13 10 15 14 11

SRM3

SRT3 No. Part name Material Remarks No. Part name Material Remarks
ø12 to 25: Stainless steel ø16 to 100
MRL2 1 Piston rod 9 Piston Aluminum alloy Chromate
ø32 to 100: Steel Industrial chrome plating
2 C type snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber
MRG2 ø12 to 25: Stainless steel ø32 to 100: Alumite
3 Rod metal Special aluminum Chromate 11 Cover
ø32 to 100: Aluminum alloy (*1)
SM‑25 4 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet ø20 to 100 (*2)
5 Body Aluminum alloy Hard alumite 13 Cushion rubber (R) Urethane rubber
ShkAbs 6 Rod packing Nitrile rubber 14 Cushion rubber (H) Urethane rubber
7 Spacer Aluminum alloy ø12 to ø32: Chromate 15 Wear ring Polyacetal resin
FJ 8 Magnet Plastic
*1: ‌For ø20 with more than 100 mm stroke length and ø25 with more than 150 mm stroke length, the standard cover material is aluminum alloy with chromate
FK coating noted in remarks.
*2: Material is steel for copper and PTFE free specifications.
Spd
Contr
Repair parts list
Ending Same as SSD2-K Series (double acting/high load). Refer to pages 780 and 781.

796
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

797
 SSD2 (Long stroke length) Series
SCP*3
Dimensions
● SSD2 (long stroke length) -(L)-12 to 25 ● Rod end male thread
CMK2 * The dimensions are common for types with and without switches.
ø12/ø16 A + stroke length
a’ wf
c’
CMA2 *6
WF B + stroke length T
FA
8-J C D 2-EE
SCM

øMM
Mounting hole
KK

øMM
SCG FB
HD
F
N

SCA2 kk’
Width across
FA

flats M
SCS2 Width across flats H
RD

øI
8-KA
øK

CKV2 N
F
CAV2/
ø20/ø25 A + stroke length
COVP/N2
WF B + stroke length
*6
*2 FA C D
SSD2 8-J 2-EE
Mounting hole
SSG
KK
HD
SSD
øMM
FB
N
F

CAT

MDC2
øK
RD
MVC
øI

M
8-KA
N
SMG F

MSD/
MSDG · Precautions regarding the switch mounting groove
*1: Only F switch is available for the ø20 or ø25 piping port surface.
FC* Code Common dimensions with switch
Bore size (mm) A *1 B *1 C D *3 EE F FA *6 FB I J *2 K KA KK M MM N WF
STK ø12 45.5 32 5.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 13.5
ø16 45.5 32 5.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 13.5
SRL3 ø20 55.5 41 8 5.5(8) M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 14.5
ø25 59 44 11 6(11) M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 15

SRG3 Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Proximity F2S/F3S
dimensions T5H/T5V *3 T3H/T3V *3 T3WH/T3WV *3 F2YH/F2YV, F3YH/F3YV *3
SRM3 Bore size (mm) HD RD HD RD HD RD HD RD HD RD
ø12 8.5 5 8.5 5 10.5 6.5
ø16 8.5 5 8.5 5 10.5 6.5
SRT3 ø20 6(12.5) 16(10) 6(12.5) 16(10) 7.5(14) 17.5(12) 10(16.5) 20(14.5) 9(15.5) 19(13.5)
ø25 5.5(14) 19.5(12) 5.5(14) 19.5(12) 7(15.5) 21(14) 9.5(18) 23.5(16.5) 8.5(17) 22.5(15.5)
MRL2 *1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
(Example) If the custom stroke length is 70 mm, apply the standard stroke length 75 mm.
MRG2
*2 : No spot facing J for ø20 with more than 100 mm stroke length and ø25 with more than 150 mm stroke length.
*3 : Values in ( ) are for ø20 with more than 100 mm stroke length and ø25 with more than 150 mm stroke length.
SM‑25 *4 : Refer to page 1044 for HD and RD dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
*5 : Refer to page 1044 for protruding dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
*6 : Dimensions in ( ) of FA are for the radial lead wire.
ShkAbs *7 : For dimensions of individual accessories, refer to pages 1046 to 1049.

FJ
● Dimensions of rod end male thread part
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 13.5
Contr ø16 12 10 10 M6 6 8 3.6 13.5
ø20 14 12 13 M8 8 10 5 14.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 15

798
 SSD2 (Long stroke length) Series
Dimensions
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-(L)-12 to 25 -LB SSD2-(L)-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

CD
TR
AU socket bolt 8-G
N
SCA2

H
4-øAB

10
TS AK CJ + stroke length
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

LF CJ + stroke length
SSG

Code Common dimensions Female thread Code Common dimensions SSD

Bore size AB AG AH AK AT AU G N TR TS M Bore size
(mm) (mm)
CA CB CC CD D E G H N UB
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3 CAT
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
-0.3

ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28 20 -0.1
-0.3 MDC2
Code Male thread Code Female thread Male thread
Bore size Without/with switch Without/with switch Bore size Without/with switch Without/with switch
(mm)
WF LF
A B LX
a’ wf LF
A B LX (mm)
WF
A B CJ
a’ wf
A B CJ MVC
ø12 13.5 19.5 50.3 32 20 10.5 13.5 19.5 60.8 32 20 ø12 13.5 65.5 32 59.5 10.5 13.5 76 32 59.5
ø16 13.5 19.5 50.3 32 20 12 13.5 19.5 62.3 32 20 ø16 13.5 66.5 32 60.5 12 13.5 78.5 32 60.5
ø20 14.5 20.5 62.7 41 29 14 14.5 20.5 76.7 41 29 ø20 14.5 82.5 41 73.5 14 14.5 96.5 41 73.5
SMG
ø25 15 22.5 66.2 44 29 17.5 15 22.5 83.7 44 29 ø25 15 89 44 79 17.5 15 106.5 44 79
MSD/
● Rod side flange (FA) ● Head side flange (FB) MSDG
SSD2-(L)-12 to 25 -FA SSD2-(L)-12 to 25 -FB FM FC*
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
N FT STK
2-FD
2-FD
SRL3
FH
N
FH
N

SRG3

Mounting bolt 4-G

Mounting bolt 4-G
Hexagon socket button head bolt
SRM3
Hexagon socket button head bolt
Rod end male thread
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size
ShkAbs
(mm) FD FH FL FM FT N G (mm) FD FH FL FM FT N G
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Without/with switch Without/with switch Bore size Without/with switch Without/with switch
Bore size
(mm) WF a’ wf (mm) WF a’ wf Spd
A B A B A B A B
ø12 13.5 45.5 32 10.5 13.5 56 32 ø12 13.5 51 32 10.5 13.5 61.5 32 Contr
ø16 13.5 45.5 32 12 13.5 57.5 32 ø16 13.5 51 32 12 13.5 63 32
ø20 14.5 55.5 41 14 14.5 69.5 41 ø20 14.5 63.5 41 14 14.5 77.5 41 Ending
ø25 15 59 44 17.5 15 76.5 44 ø25 15 67 44 17.5 15 84.5 44

799
 SSD2 (Long stroke length) Series
SCP*3
Dimensions
● SSD2 (long stroke length) -(L)-32 to 100 ● Rod end male thread
CMK2 * The dimensions are common for types with and without switches.
a’ wf
CMA2
c’
V
SCM F T
A + stroke length
N WF B + stroke length
SCG
H *2 V C D 2-EE

øP h9
8-J
SCA2 Mounting hole
KK
O

øMM
kk’ Width across
SCS2 flats M
Width across flats H
CKV2 HD
øP h9
øMM
G

FB
F

CAV2/
N

RD
COVP/N2

SSD2

SSG
øK

øI
8-KA
M
FA
SSD *6

CAT
Code Common dimensions with switch
MDC2 Bore size (mm) A *1 B *1 C D *3 EE F FA *6 FB G H I J K KA KK M MM N O P V WF
9 spot face
ø32 62.5 45.5 8 8 Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 22 5 17
MVC ø40 72 55 12 8.5(12) Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face
depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 28 5 17
11 spot face
ø50 73.5 55.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 35 5 18
SMG ø63 75 57 13 11(13) Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face
103 M10 depth 25 M10 depth 15 17 20 60 7 35 5 18
depth 9
17.5 spot face
ø80 86 66 16 13(16) Rc3/8 98 49.5(53) 28.5 104 31 10.5 132 M12 depth 28 M16 depth 21 22 25 77 6 43 5 20
MSD/ depth 11
17.5 spot face
MSDG ø100 97.5 75.5 23 15(23) Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 59 5 22
Switch dimensions Reed T0H/T0V, T5H/T5V *3 Proximity T2H/T2V, T3H/T3V *3 Proximity T2WH/T2WV, T3WH/T3WV *3
FC* Bore size (mm) HD RD HD RD HD RD
ø32 8.5(16) 18(10) 8.5(16) 18(10) 10(17.5) 19.5(12)
STK ø40 9.5(19) 26.5(16.5) 9.5(19) 26.5(16.5) 11(20.5) 28(18.5)
ø50 10(19) 26(17) 10(19) 26(17) 11.5(20.5) 27.5(19)
SRL3 ø63 17.5(23) 20(14.5) 17.5(23) 20(14.5) 19(24.5) 21.5(16.5)
ø80 22.5(28) 24(18.5) 22.5(28) 24(18.5) 24(29.5) 25.5(20.5)
SRG3
ø100 28(33.5) 28(22.5) 28(33.5) 28(22.5) 29.5(35) 29.5(24.5)
*1 : To calculate A + stroke length or B + stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
SRM3 length) to the stroke length value. (Example) If the custom stroke length is 121 mm, apply the standard stroke length 125 mm.
*2 : No spot facing J for ø32 to ø50 with more than 150 mm stroke length and ø63 to ø100 with more than 200 mm stroke length.
SRT3 *3 : Values in ( ) are for ø32 to ø50 with more than 150 mm stroke length and ø63 to ø100 with more than 200 mm stroke length.
*4 : Refer to page 1044 for HD and RD dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
*5 : Refer to page 1044 for protruding dimensions of the 2-color display, off-delay, AC magnetic field tolerant, T1* and T8* switches.
MRL2 *6 : Dimensions in ( ) of FA are for the radial lead wire.
*7 : For dimensions of individual accessories, refer to pages 1046 to 1049.
MRG2
● Dimensions of rod end male thread part
SM‑25 Code a’ c’ H kk’ M MM T wf
Bore size (mm)
ShkAbs ø32 23.5 20.5 22 M14×1.5 14 16 8 15
ø40 23.5 20.5 22 M14×1.5 14 16 8 15

FJ ø50 28.5 26 27 M18×1.5 17 20 11 15

ø63 28.5 26 27 M18×1.5 17 20 11 15
FK ø80 35.5 32.5 32 M22×1.5 22 25 13 18
ø100 35.5 32.5 41 M26×1.5 27 30 16 18
Spd
Contr

Ending

800
 SSD2 (Long stroke length) Series
Dimensions
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-(L)-32 to 100 -LB SSD2-(L)-32 to 100 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CB +00.2 CMA2
CC

MR
SCM
R
AG

E
SCG

N
AH
AT
AD
AE

CD
H1
AU Low head hexagon socket bolt 4-G AC SCA2

0
N
TR 4-øAB AK Mounting bolt 4-G N
CJ + stroke length
TS LF LX + stroke length E
Rod end male thread SCS2
A + stroke length
Rod end male thread A + stroke length
a’ wf B + stroke length a’ wf B + stroke length
CKV2
CAV2/
COVP/N2

SSD2
CJ + stroke length
LF SSG
Code Common dimensions Female thread Code Common dimensions
Bore size AB AD AE AG AH AK AT AU G N TR TS
Bore size AC CB CC CD D E G MR N UB SSD
(mm) (mm)
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 ø40 5 18.2 14 10 6 52 M6×16 10 40 36
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 ø50 6 22.2 20 14 7 64 M8×20 14 50 44 CAT
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 ø63 7 22.2 20 14 8 77 M10×25 14 60 44
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 ø80 9 28.2 27 18 10 98 M12×40 18 77 56
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 ø100 12 32.2 31 22 13 117 M12×40 22 94 64 MDC2
Code Male thread Code Female thread Male thread
Bore size Without/with switch Without/with switch Bore size Without/with switch Without/with switch
M WF LF a’ wf LF WF a’ wf
(mm) A B LX A B LX (mm) A B CJ A B CJ MVC
ø32 7.2 17 25 69.7 45.5 29.5 23.5 15 23 91.2 45.5 29.5 ø32 17 92.5 45.5 82.5 23.5 15 114 45.5 80.5
ø40 7.2 17 25 79.2 55 39 23.5 15 23 100.7 55 39 ø40 17 104 55 94 23.5 15 125.5 55 92
ø50
ø63
8.2
9.2
18
18
29.5
31
81.7
84.2
55.5
57
32.5
31
28.5
28.5
15
15
26.5
28
107.2
109.7
55.5
57
32.5
31
ø50
ø63
18
18
115.5
119
55.5
57
101.5
105
28.5
28.5
15
15
141
144.5
55.5
57
98.5
102
SMG
ø80 11.5 20 35 97.5 66 36 35.5 18 33 131 66 36 ø80 20 142 66 124 35.5 18 175.5 66 122
ø100 13 22 39 110.5 75.5 41.5 35.5 18 35 142 75.5 41.5 ø100 22 164.5 75.5 142.5 35.5 18 196 75.5 138.5 MSD/
MSDG
● Rod side flange (FA) ● Head side flange (FB)
SSD2-(L)-32 to 100 -FA SSD2-(L)-32 to 100 -FB FM
FC*
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N 4-FD
N 4-FD FT STK

SRL3
FH
FC
FH
FC

SRG3
Mounting bolt 4-G Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt
ø32 to ø63: Hexagon socket button head bolt Rod end male thread
ø80/ø100: Special bolt
SRM3
ø80/ø100: Special bolt A + stroke length
A + stroke length
Rod end male thread a’ wf B + stroke length
a’ wf B + stroke length FT SRT3
FT

MRL2

MRG2

Code Common dimensions Code Common dimensions SM‑25

Bore size FC FD FH FL FM FT N G Bore size
(mm) (mm) FC FD FH FL FM FT N G
ø32 34 5.5 48 56 65 8 34 M6×16 ø32 34 5.5 48 56 65 8 34 M6×16 ShkAbs
ø40 40 5.5 54 62 72 8 40 M6×16 ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20 ø50 50 6.6 67 76 89 9 50 M8×20
ø63 60 9 80 92 108 9 60 M10×25 ø63 60 9 80 92 108 9 60 M10×25 FJ
ø80 77 11 99 116 134 11 77 M12×40 ø80 77 11 99 116 134 11 77 M12×40
ø100 94 11 117 136 154 11 94 M12×40 ø100 94 11 117 136 154 11 94 M12×40
Code Female thread Male thread Code Female thread Male thread FK
Bore size Without/with switch Without/with switch Bore size Without/with switch Without/with switch
(mm) WF a’ wf WF a’ wf
A B A B (mm) A B A B
ø32 17 62.5 45.5 23.5 15 84 45.5 ø32 17 70.5 45.5 23.5 15 92 45.5 Spd
ø40 17 72 55 23.5 15 93.5 55 ø40 17 80 55 23.5 15 101.5 55 Contr
ø50 18 73.5 55.5 28.5 15 99 55.5 ø50 18 82.5 55.5 28.5 15 108 55.5
ø63 18 75 57 28.5 15 100.5 57 ø63 18 84 57 28.5 15 109.5 57
ø80 20 86 66 35.5 18 119.5 66 ø80 20 97 66 35.5 18 130.5 66 Ending
ø100 22 97.5 75.5 35.5 18 129 75.5 ø100 22 108.5 75.5 35.5 18 140 75.5

801
 Compact cylinder single acting/push

SSD2-X Series
Single acting/pull/with switch
SCP*3

CMK2
SSD2-Y Series
● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50
JIS symbol SSD2-X SSD2-Y
CMA2

SCM
Specifications
SCG SSD2-X SSD2-Y
Item
SSD2-XL (with switch) SSD2-YL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50
Actuation SSD2-X, XL: single acting/push, SSD2-Y, YL: single acting/pull
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.2 (≈29 psi, 2 bar) 0.17 (≈25 psi, 1.7 bar) 0.12 (≈17 psi, 1.2 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *2 Rc1/4
+1.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 500
SSD Cushion None
Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
CAT Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1
*1: ‌Do not leave the single acting cylinder pressurized for a long time. If it is left pressurized for long periods, the piston rod
MDC2 may not return due to spring load when the pressure is released. Use the double acting if the cylinder needs to be left
pressurized for long periods.
*2: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
MVC
Min. stroke length with switch
SMG
Stroke length (1 or 2 switches)
MSD/
MSDG Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) length (mm) length (mm) (mm)
FC* ø12 ø12
10 *2
ø16 ø16
STK ø20 ø20
5, 10 10 5 5
ø25 ø25
SRL3 5
ø32 ø32
ø40 ø40
SRG3
ø50 10, 20 20 10 ø50 10 10
SRM3 *1 : ‌When using the type with switch, refer to the table on the right. *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic field proof,
*2 : Refer to pages 811 and 817 for the min. stroke length with mounting T1* or T8* switch is not available.
bracket LB. *2: 5
 mm stroke length is available only for the type with 1 on rod side.
SRT3

MRL2 SSD2-X/SSD2-Y spring load (Unit: N)

SSD2-X SSD2-Y
MRG2 Bore size (mm) Stroke length (mm)
When stroke length = 0 At full stroke length operation When stroke length = 0 At full stroke length operation
5 4 14 3 10
12
SM‑25 10 4 14 3 10
5 6 15 4 19
16
ShkAbs 10 6 15 4 19
5 6 15 5 27
20
10 6 15 5 27
FJ
5 11 21 10 29
25
10 11 21 10 29
FK 5 23 30 20 29
32
10 16 30 20 29
Spd
5 13 30 20 29
Contr 40
10 21 39 20 29
10 30 50 24 83
Ending 50
20 24 54 24 83

802
 SSD2- XY Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV
F2S F3S F2H/F2V F3H/F3V F3YH/F3YV
F2YV (made to order)
Dedicated for For programmable Dedicated for For programmable CMA2
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
SCG
LED Yellow LED Red/green Red/green
Yellow LED
Indicator lamp LED
(Lit when ON)
LED SCA2
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
SCS2
Weight g 1 m:10 3 m:29

Switch specifications (T switch) CKV2

● 1-color/2-color display/for AC magnetic field proof
CAV2/
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
COVP/N2
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT SSD2
For programmable Dedicated for For programmable controller, For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller relay controller, relay lamp), serial connection controller, relay controller SSG
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
SSD
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green CAT
Indicator LED Without indicator LED
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED
lamp (Lit when ON) lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON) MDC2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less MVC
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 SMG
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1: Refer to Ending Page 1 for detailed switch specifications and dimensions. MSD/
*2: Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. MSDG
*3: The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) FC*
*4: Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5: The F type switch uses a bend-resistant lead wire.
STK
(Unit: g)
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.)
Stroke length (mm) 5 10 20 SRL3
Bore size (mm) Without switch With switch Without switch With switch Without switch With switch
ø12 40 80 49 89 - - SRG3
ø16 52 92 64 104 - -
ø20 74 114 89 129 - - SRM3
ø25 107 147 127 167 - -
ø32 155 195 183 223 - -
SRT3
ø40 249 289 285 325 - -
ø50 - - 459 499 572 612
MRL2
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa MRG2
(mm) direction 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ø12
Push - 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102 SM‑25
Pull - 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
Push - 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
ShkAbs
Push - 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20
Pull - 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102 FJ
Push - 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102 FK
Push 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102 Spd
Push 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 Contr
ø40
Pull 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50 Ending
Pull 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103

803
 SSD2- XY Series
SCP*3
How to order
Without switch (without magnet for switch) Code Description

CMK2 SSD2-X 12 5 N LB I A Model No.

SSD2-X Single acting/push
With switch (built-in magnet for switch) SSD2-XL Single acting/push/with switch
CMA2 SSD2-XL 12 10 T0H R N LB I SSD2-Y Single acting/pull
SSD2-YL Single acting/pull/with switch

SCM A Model No. B Bore size

B Bore size (mm)
12 ø12
16 ø16
SCG 20 ø20
25 ø25
SCA2 32 ø32
40 ø40
50 ø50
SCS2
C Port thread
C Port thread Blank Rc thread
CKV2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
CAV2/
COVP/N2 D Stroke length (mm)
D Stroke length Bore size (mm) ø12 ø16 ø20 ø25 ø32 ø40 ø50
SSD2 5 5 ● ● ● ● ● ●
10 10 ● ● ● ● ● ● ●
20 20 ●
SSG
E Switch model No.
E Switch model No. Lead Bore size
Contact
Lead wire Lead wire Voltage
SSD *1 Straight L-shaped AC DC
Display
wire 12 16 20 25 32 40 50
*2 - F2S* ● 2-wire ● ●
CAT *3 - F3S* ● 3-wire ● ●
1-color display
*8 ● ●
Proximity

F2H* F2V* ● 2-wire

*9 F3H* F3V* ● 3-wire ● ●
MDC2 F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F Switch quantity
F2YH* F2YV* ● 2-wire ● ●
2-color display
MVC G Option *4
F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ●
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ●

SMG Precautions for model No. selection T8H* T8V* ● ● 1-color display ● ●
*1 : The T2YD* switch cannot be mounted on the ø12 and T1H* T1V* ● ● ● ● ● ●
MSD/ ●
2-wire
● ● ● ● ● ● ●
ø16 bore sizes. T2H* T2V* 1-color display
MSDG *2 : The T8* switch cannot be mounted on the ø12 to ø32 T3H* T3V* ● ● ● ● ● ● ● ●
bore sizes. 3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ●
FC* *3 : The F switch can only be mounted on the piping port ● ● ● ● ● ● ●
Proximity

T2WH* T2WV* ●
surface of bore sizes ø20 and ø25. 2-wire
T2YH* T2YV* ● ● ● ● ● ●
*4 : Piston rod of ø12 to ø25 is stainless steel as standard. 2-color display
STK C snap ring is stainless steel instead of steel.
T3WH* T3WV* ●
3-wire
● ● ● ● ● ● ●
T3YH* T3YV* ● ● ● ● ● ●
The rod end male thread nut is stainless steel.
*5 : The mounting bracket is included at shipment. T2YD* - ● 2-color display ● ● ● ● ●
SRL3 T2YDT* - ● AC magnetic field
2-wire
● ● ● ● ●
*6 : The projection dimension of piston rod WF
when LB or FA is selected is different from that T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ●
SRG3 of the standard. Refer to the dimensions on * Lead wire length
pages 809, 811, 813, 815, 817 and 819. The Blank 1 m (standard)
number of the specified protruding dimension 3 3 m (option)
SRM3 will be added at the end of the model No. 5 5 m (option) *11
printed on the metal plate on the body.
*7 : ”I” and “Y” cannot be selected together. F Switch quantity
SRT3 *8 : The F switch with L lead wire cannot be selected on R 1 on rod side
ø20 models.
H 1 on head side
*9 : Switches are shipped with the product. Contact CKD if
MRL2 assembling before shipment is necessary.
D 2
*10 : Refer to pages 750 and 751 for combinations of G Option
MRG2 variations/options. Bore size (mm) 12 16 20 25 32 40 50
*11 : F type switch cannot be selected.
Blank Rod end female thread ● ● ● ● ● ● ●
*12 : Refer to pages 811 and 817 for the min. stroke N Rod end male thread ● ● ● ● ● ● ●
SM‑25 length with mounting bracket LB.
P6 Copper and PTFE free specifications Supported as standard
[Example of model No.] M *4 Piston rod material (stainless steel) ● ● ● ● ● ● ●
ShkAbs P4 Specifications for rechargeable battery ● ● ● ● ● ● ●
SSD2-XL-12-5-T0H-R-N P40 (Made to order) ● ● ● ● ● ● ●
Model: Compact cylinder
FJ H Mounting bracket
●
A Model No. : Single acting push H Mounting Blank Without mounting bracket
●
B Bore size : ø12 mm bracket LB Axial foot
FK
●
C Port thread : Rc thread *5 CB Clevis bracket (pin and snap ring included)

Spd ● D Stroke length : 5 mm *6 FA Rod side flange

Contr ●E Switch model No. : R

 eed T0H switch/ FB Head side flange
Lead wire length 1 m I Accessory I Accessory (available when rod end male thread “N” is selected)
Ending ●
F Switch quantity : 1 on rod side *7 I Rod eye
●
G Option : Rod end male thread Y Rod clevis (pin and snap ring included)

804
 SSD2- XY Series
How to order
How to order switch SCP*3
SW T0H
CMK2

CMA2
Switch model No.
(Item E on page 804) SCM

SCG

How to order mounting bracket SCA2

Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 SCS2
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50
CKV2
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 CAV2/
COVP/N2
*1: The foot mounting bracket is provided as 2 pcs./set.

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

805
 SSD2-X Series
SCP*3
Internal structure and parts list
● SSD2-XL-12 to 32 (single acting/push/with switch) ● SSD2-XL-40, 50 (single acting/push/with switch)
CMK2

CMA2 1 2 3 12 4 5 6 7 8 9 10 11 1 2 3 12 4 5 6 7 8 9 10 11

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG ● SSD2-X-12 to 32 (single acting/push) ● SSD2-X-40, 50 (single acting/push)

SSD
1 2 3 12 4 5 6 9 10 11 1 2 3 12 4 5 6 9 10 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
No. Part name Material Remarks No. Part name Material Remarks
SRM3 ø12 to ø25: Stainless steel ø16 to ø50: Industrial 7 Spacer Aluminum alloy Chromate
1 Piston rod
ø32 to ø50: Steel chrome plating 8 Magnet Plastic
SRT3 2 C snap ring Steel Zinc phosphate 9 Piston Aluminum alloy Chromate
3 Rod metal Special aluminum Alumite 10 Piston packing Nitrile rubber
MRL2 4 Plug Stainless steel ø12 to ø25: Stainless steel
11 Cover ø32 to ø50: Alumite
5 Body Aluminum alloy Hard alumite ø32 to ø50: Aluminum alloy
MRG2 6 Spring Piano wire Electrodeposition 12 Stainless steel wire mesh Stainless steel

SM‑25
Repair parts list
Bore size (mm) Kit No. Repair parts No.
ShkAbs
ø12 SSD2-X-12K
ø16 SSD2-X-16K
FJ
ø20 SSD2-X-20K
ø25 SSD2-X-25K 10
FK
ø32 SSD2-X-32K
Spd ø40 SSD2-X-40K
Contr ø50 SSD2-X-50K

Ending

806
 SSD2-Y Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-YL (single acting/pull/with switch)
CMK2

1 2 3 9 12 13 5 7 8 10 4 14 6 11 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

● SSD2-Y (single acting/pull) SSG

SSD
1 2 3 9 12 5 10 4 6 14 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
No. Part name Material Remarks No. Part name Material Remarks
8 Magnet Plastic SRM3
1 Piston Stainless steel
9 Rod packing Nitrile rubber
2 C snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber SRT3
3 Rod metal Special aluminum alloy Alumite ø12 to ø25: Stainless steel
11 Cover ø32 to ø50: Alumite
4 Plug Stainless steel ø32 to ø50: Aluminum alloy MRL2
5 Body Aluminum alloy Hard alumite 12 Metal gasket Nitrile rubber
6 Spring Piano wire Electrodeposition 13 Round S type snap ring Steel Zinc phosphate MRG2
7 Spacer Aluminum alloy Chromate 14 Stainless steel wire mesh Stainless steel
SM‑25
Repair parts list
ShkAbs
Bore size (mm) Kit No. Repair parts No.
ø12 SSD2-Y-12K
FJ
ø16 SSD2-Y-16K
ø20 SSD2-Y-20K
FK
ø25 SSD2-Y-25K 9 10 12

ø32 SSD2-Y-32K Spd

ø40 SSD2-Y-40K Contr
ø50 SSD2-Y-50K
Ending

807
 SSD2-X Series
SCP*3
Dimensions
● SSD2-XL-12 to 25 (with switch) ● Rod end male thread
CMK2 ø12/ø16 A
WF B a’ wf
F
CMA2 8-J Plug C D c’
N T
Mounting hole (With breathing hole) 2-EE
SCM

øMM
KK
SCG HD

FB

øMM
N
F

SCA2 kk’
Width across
flats M
FA

SCS2 Width across flats H

FB
CKV2

øI
øK

8-KA
M RD
CAV2/ FA
COVP/N2 *4
ø20/ø25 A
SSD2 WF B
F
Plug C D
8-J N
SSG Mounting hole
(With breathing hole) EE

SSD KK HD

CAT
øMM
FB
N
F

MDC2

MVC
M
øI

*4 8-KA
øK

SMG FA RD

MSD/
MSDG
Code Common dimensions with switch
FC* Bore size (mm) A B C D EE F FA *4 FB I J K KA KK M MM N WF
5 30.5 27
Stroke length Stroke length Stroke length Stroke length

13 6.5 spot face M4 M3

STK ø12
10 35.5 32
5.5 5.5 M5 25
(16.5)
4.5 3.5
depth 3.5
32
depth 7 depth 6
5 6 15.5 3.5

5 30.5 27 15 6.5 spot face M4 M4

SRL3 ø16
10 35.5 32
5.5 5.5 M5 29
(18.5)
4.5 3.5
depth 3.5
38
depth 7 depth 8
6 8 20 3.5

5 39 34.5 18.5 9 spot face M6 M5

SRG3 ø20
10 44 39.5
8 5.5 M5 36
(22)
12.5 5.5
depth 5.5
47
depth 11 depth 7
8 10 25.5 4.5

5 42.5 37.5 20.5 9 spot face M6 M6

SRM3 ø25 11 6 M5 40
(24)
13.5 5.5
depth 5.5
51
depth 11 depth 12
10 12 28 5
10 47.5 42.5
Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
SRT3 Proximity F2S/F3S
dimensions T5H/T5V T3H/T3V T3WH T3WV F2YH/F2YV, F3YH/F3YV
Bore size (mm) HD RD HD RD HD RD HD RD HD RD
MRL2
ø12 0 3 0 3 2 5
ø16 0 4 0 4.5 1 6
MRG2 ø20 3 7.5 3 7.5 5 9.5 7.5 12 6.5 11
ø25 4 9.5 4 9.5 6 11.5 8.5 14 7.5 13
SM‑25 *1 : Only F switch is available for the ø20 or ø25 piping port surface.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
ShkAbs *3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
FJ
● Rod end male thread
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

808
 SSD2-X Series
Single acting/push
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-XL-12 to 25 -LB SSD2-XL-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

CD
TR
AU Low head hexagon
N
SCA2

H
socket bolt 8-G

10
4-øAB AK CJ + stroke length
TS Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm) CAT
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.3
20 -0.1
-0.3
MDC2
Code Male thread Code Female thread Male thread
Bore size
WF LF A B LX a’ wf LF A B LX
Bore size WF
With switch
a’ wf
With switch MVC
(mm) (mm) A B CJ A B CJ
ø12 13.5 19.5 40.3 22 10 10.5 13.5 19.5 50.8 22 10 ø12 3.5 45.5 22 39.5 10.5 3.5 56 22 39.5
ø16 13.5 19.5 40.3 22 10 12 13.5 19.5 52.3 22 10 ø16 3.5 46.5 22 40.5 12 3.5 58.5 22 40.5 SMG
ø20 14.5 20.5 51.2 29.5 17.5 14 14.5 20.5 65.2 29.5 17.5 ø20 4.5 61 29.5 52 14 4.5 75 29.5 52
ø25 15 22.5 54.7 32.5 17.5 17.5 15 22.5 72.2 32.5 17.5 ø25 5 67.5 32.5 57.5 17.5 5 85 32.5 57.5
MSD/
MSDG
● Rod side flange (FA) with switch ● Head side flange (FB) with switch
SSD2-XL-12 to 25 -FA SSD2-XL-12 to 25 -FB FM FC*
FM A + stroke length A + stroke length FL
FL WF B + stroke length B + stroke length
WF FT N STK
N FT
2-FD
2-FD SRL3
FH
N
FH
N

SRG3

Mounting bolt 4-G Mounting bolt 4-G SRM3

Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length
a’ wf B + stroke length SRT3
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
ShkAbs
Bore size Bore size
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12 FJ
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size
WF A B a’ wf A B Bore size WF
With switch
a’ wf
With switch Spd
(mm) (mm) A B A B Contr
ø12 13.5 35.5 22 10.5 13.5 46 22 ø12 3.5 31 22 10.5 3.5 41.5 22
ø16 13.5 35.5 22 12 13.5 47.5 22 ø16 3.5 31 22 12 3.5 43 22
ø20 14.5 44 29.5 14 14.5 58 29.5 ø20 4.5 42 29.5 14 4.5 56 29.5 Ending
ø25 15 47.5 32.5 17.5 15 65 32.5 ø25 5 45.5 32.5 17.5 5 63 32.5

809
 SSD2-X Series
SCP*3
Dimensions
● SSD2-X-12 to 25 (without switch) ● Rod end male thread
CMK2
ø12/ø16 a’ wf
A
CMA2 c’
F WF B T
N C D
SCM

øMM
8-J Plug
(Mounting hole) EE
(With breathing hole)
SCG
KK

SCA2 kk’

øMM
Width across
N
F

flats M
SCS2 Width across flats H

CKV2

øI
8-KA
øK

CAV2/
COVP/N2 M

SSD2

SSG
ø20/ø25
SSD
A
F
CAT WF B
N C D
8-J Plug EE
MDC2 (Mounting hole) (with breathing hole)

MVC KK

SMG
øMM
N
F

MSD/
MSDG

FC*
øI

8-KA
øK

M
STK

SRL3

SRG3

SRM3 Code Dimensions without switch and common dimensions

Bore size (mm) A B C D EE F I J K KA KK M MM N WF
SRT3 5 25.5 22
Stroke length Stroke length Stroke length Stroke length

6.5 spot face M4 M3

ø12 5.5 5.5 M5 25 3.5 32 5 6 15.5 3.5
10 30.5 27 depth 3.5 depth 7 depth 6
MRL2
5 25.5 22 6.5 spot face M4 M4
ø16 5.5 5.5 M5 29 3.5 38 6 8 20 3.5
10 30.5 27 depth 3.5 depth 7 depth 8
MRG2
5 29 24.5 9 spot face M6 M5
ø20 8 5.5 M5 36 5.5 47 8 10 25.5 4.5
10 34 29.5 depth 5.5 depth 11 depth 7
SM‑25
5 32.5 27.5 9 spot face M6 M6
ø25 11 6 M5 40 5.5 51 10 12 28 5
10 37.5 32.5 depth 5.5 depth 11 depth 12
ShkAbs

● Dimensions of rod end male thread part

FJ
Code
a’ c’ H kk’ M MM T wf
FK Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
Spd ø16 12 10 10 M6 6 8 3.6 3.5
Contr ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
Ending
*1: For dimensions of individual accessories, refer to pages 1046 to 1049.
810
 SSD2-X Series
Single acting/push
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch ● Clevis bracket (CB) without switch
SSD2-X-12 to 25 -LB SSD2-X-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

CD
TR
AU socket bolt 8-G
N
SCA2

H
4-øAB

10
TS AK CJ + stroke length
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
CAT
-0.3

ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1

-0.4

ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2
ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.3

20 -0.1
MDC2
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 -0.3

Code Male thread Code Female thread Male thread

Bore size
WF LF A B LX a’ wf LF A B LX
Bore size WF
Without switch
a’ wf
Without switch MVC
(mm) (mm) A B CJ A B CJ
ø12 13.5 19.5 35.3 17 5 10.5 13.5 19.5 45.8 17 5 ø12 3.5 40.5 17 34.5 10.5 3.5 51 17 34.5
ø16 13.5 19.5 35.3 17 5 12 13.5 19.5 47.3 17 5 ø16 3.5 41.5 17 35.5 12 3.5 53.5 17 35.5 SMG
ø20 14.5 20.5 41.2 19.5 7.5 14 14.5 20.5 55.2 19.5 7.5 ø20 4.5 51 19.5 42 14 4.5 65 19.5 42
ø25 15 22.5 44.7 22.5 7.5 17.5 15 22.5 62.2 22.5 7.5 ø25 5 57.5 22.5 47.5 17.5 5 75 22.5 47.5 MSD/
Note: ø20: LB cannot be selected for 5 mm stroke length. MSDG
● Rod side flange (FA) without switch ● Head side flange (FB) without switch
SSD2-X-12 to 25 -FA SSD2-X-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size ShkAbs
(mm)
FD FH FL FM FT N G FD FH FL FM FT N G
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16
ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size Bore size WF
Without switch
a’ wf
Without switch
Spd
(mm) WF A B a’ wf A B
(mm) A B A B
ø12 13.5 30.5 17 10.5 13.5 41 17 ø12 3.5 26 17 10.5 3.5 36.5 17 Contr
ø16 13.5 30.5 17 12 13.5 42.5 17 ø16 3.5 26 17 12 3.5 38 17
ø20 14.5 34 19.5 14 14.5 48 19.5 ø20 4.5 32 19.5 14 4.5 46 19.5 Ending
ø25 15 37.5 22.5 17.5 15 55 22.5 ø25 5 35.5 22.5 17.5 5 53 22.5

811
 SSD2-X Series
SCP*3
Dimensions
● SSD2-XL-32 to 50 (with switch) ● Rod end male thread
CMK2 F A a’ wf
N WF B c’
CMA2 C D T
8-J H

øMM
Plug HD
Mounting hole EE
SCM (With breathing hole)

øK
O

SCG KK

kk’
SCA2 Width across

øMM
FB
flats M
G

N
F

Width across flats H

SCS2

CKV2

øI
M RD 8-KA
CAV2/ FA
COVP/N2 *4

SSD2
● SSD2-X-32 to 50 (without switch)
F A
SSG
N WF B
H C D
SSD
8-J
Mounting hole Plug EE
(With breathing hole)
CAT
øK
O

MDC2 KK

MVC
øMM
G

N
F

SMG
MSD/
MSDG
øI

8-KA
FC* M

STK Code Without switch Common dimensions with switch

Bore size (mm) A B A B C *7 D *7 EE *6 F FA *4 FB G H I J K KA KK M MM N O WF
SRL3 5 35 28 45 38
Stroke length Stroke length Stroke length

8 8 9 spot face M6 M8
ø32 Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 60 14 16 34 4.5 7
10 40 33 50 43 (10) (5.5) depth 5.5 depth 11 depth 13

SRG3 ø40
5 41.5 34.5 51.5 44.5 12 8.5
Rc1/8 52 26.5(30) 27.5 57 15 5.5
9 spot face
69
M6 M8
14 16 40 5 7
10 46.5 39.5 56.5 49.5 (11.5) (8) depth 5.5 depth 11 depth 13

SRM3 ø50
10 48.5 40.5 58.5 50.5
10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9
11 spot face
86
M8 M10
17 20 50 7 8
20 58.5 50.5 68.5 60.5 depth 6.5 depth 13 depth 15

SRT3 Switch dimensions Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
*2 *2 *2 *2
Bore size (mm) HD RD HD RD HD RD
MRL2 ø32 4 9.5 4 9.5 6 11.5
ø40 7 12 7 12 8.5 13.5
MRG2 ø50 7.5 12.5 7.5 12.5 9 14
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
SM‑25 length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
ShkAbs *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
FJ
*7 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.

● Rod end male thread

FK
Code
a’ c’ H kk’ M MM T wf
Spd Bore size (mm)
Contr ø32 23.5 20.5 22 M14×1.5 14 16 8 5
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Ending
ø50 28.5 26 27 M18×1.5 17 20 11 5

812
 SSD2-X Series
Single acting/push
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-X(L)-32 to 50 -LB SSD2-X(L)-32 to 50 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CB +00.2
CC CMA2

RMR SCM
AG

E
N
AH SCG
AT
AD

CD
AE

H1
AU Low head hexagon socket bolt 4-G AC
SCA2

0
N
TR 4-øAB AK CJ + stroke length Mounting bolt 4-G N
TS LF LX + stroke length E

A + stroke length
Rod end male thread SCS2
Rod end male thread A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length
CKV2
CAV2/
COVP/N2

SSD2

LF CJ + stroke length
SSG
Code Common dimensions Female thread Code Common dimensions
Bore size Bore size
AB AD AE AG AH AK AT AU G N TR AC CB CC CD D E G MR N UB
(mm) (mm) SSD
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 ø40 5 18.2 14 10 6 52 M6×16 10 40 36
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 ø50 6 22.2 20 14 7 64 M8×20 14 50 44
Code Code Female thread
CAT
Bore size Without switch With switch Bore size Without switch With switch
TS M WF LF WF
(mm) A B LX A B LX (mm) A B CJ A B CJ
ø32 71 7.2 17 25 47.2(57.2) 23(33) 7(17) 57.2 33 17 ø32 7 60 23 50 70 33 60 MDC2
ø40 78 7.2 17 25 53.7(63.7) 29.5(39.5) 13.5(23.5) 63.7 39.5 23.5 ø40 7 68.5 29.5 58.5 78.5 39.5 68.5
ø50 95 8.2 18 29.5 56.7(66.7) 30.5(40.5) 7.5(17.5) 66.7 40.5 17.5 ø50 8 80.5 30.5 66.5 90.5 40.5 76.5
Code Male thread Code Male thread MVC
Bore size Without switch With switch Bore size Without switch With switch
a’ wf LF a’ wf
(mm) A B LX A B LX (mm) A B CJ A B CJ
ø32 23.5 15 23 68.7(78.7) 23(33) 7(17) 78.7 33 17 ø32
ø40
23.5
23.5
5
5
81.5
90
23
29.5
48
56.5
91.5
100
33
39.5
58
66.5
SMG
ø40 23.5 15 23 75.2(85.2) 29.5(39.5) 13.5(23.5) 85.2 39.5 23.5
ø50 28.5 15 26.5 82.2(92.2) 30.5(40.5) 7.5(17.5) 92.2 40.5 17.5 ø50 28.5 5 106 30.5 63.5 116 40.5 73.5
* Dimensions in ( ) are for stroke lengths of more than 50 mm. MSD/
MSDG
● Rod side flange (FA) ● Head side flange (FB)
SSD2-X(L)-32 to 50 -FA SSD2-X(L)-32 to 50 -FB FC*
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
N 4-FD WF B + stroke length FT N 4-FD STK
FT

SRL3
FH
FC

FH
FC

SRG3
Mounting bolt 4-G
Mounting bolt 4-G SRM3
ø32 to ø63: Hexagon socket button head bolt Rod end male thread ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt A + stroke length
A + stroke length ø80/ø100: Special bolt
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT SRT3
FT

MRL2

MRG2

Code Common dimensions

Code Common dimensions
SM‑25
Bore size Bore size
FC FD FH FL FM FT N G FC FD FH FL FM FT N G
(mm) (mm)
ø32
ø40
34
40
5.5
5.5
48
54
56
62
65
72
8
8
34
40
M6×16
M6×16
ø32 34 5.5 48 56 65 8 34 M6×16 ShkAbs
ø50 50 6.6 67 76 89 9 50 M8×20 ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20
Code Female thread
Code Female thread FJ
Bore size Without switch With switch Bore size Without switch With switch
WF WF
(mm) A B A B (mm) A B A B
ø32 17 40(50) 23(33) 50 33
ø40 17 46.5(56.5) 29.5(39.5) 56.5 39.5 ø32 7 38 23 48 33 FK
ø50 18 48.5(58.5) 30.5(40.5) 58.5 40.5 ø40 7 44.5 29.5 54.5 39.5
ø50 8 47.5 30.5 57.5 40.5
Code Male thread
Code Male thread Spd
Bore size
(mm)
a’ wf
A
Without switch
B
With switch
A B
Bore size
a’ wf
Without switch With switch Contr
(mm) A B A B
ø32 23.5 15 61.5(71.5) 23(33) 71.5 33
ø40 23.5 15 68(78) 29.5(39.5) 78 39.5 ø32 23.5 5 59.5 23 69.5 33
ø50 28.5 15 74(84) 30.5(40.5) 84 40.5 ø40 23.5 5 66 29.5 76 39.5 Ending
* Dimensions in ( ) are for stroke lengths of more than 50 mm. ø50 28.5 5 73 30.5 83 40.5

813
 SSD2-Y Series
SCP*3
Dimensions
● SSD2-YL-12 to 25 (with switch) ● Rod end male thread
CMK2 ø12/ø16 A
F WF + stroke length B a’ wf + stroke length
8-J
N (at PUSH) C D c’
CMA2 (Mounting hole) EE
T

øMM
SCM KK Plug
(With breathing hole)

FB
HD
SCG

øMM
N
F

kk’
SCA2 FA *4 Width across
flats M
SCS2 Width across flats H

øI
FB 8-KA
øK

M RD
CKV2 FA
*4
CAV2/ ø20/ø25 A
COVP/N2 F WF + stroke length B
8-J N (at PUSH) C D
(Mounting hole)
SSD2 EE HD

Plug
SSG KK (With breathing hole)

SSD
øMM
FB
N
F

CAT

MDC2
øI

8-KA
øK

M
MVC *4
RD
FA
SMG
MSD/
MSDG
Code Common dimensions with switch
FC*
Bore size (mm) A B C D EE F FA *4 FB I J K KA KK M MM N WF
5 35.5 27
Stroke length Stroke length Stroke length Stroke length

6.5 spot face M4 M3

STK ø12
10 45.5 32
5.5 5.5 M5 25 13(16.5) 4.5 3.5
depth 3.5
32
Depth 7 Depth 6
5 6 15.5 3.5

5 35.5 27 6.5 spot face M4 M4

SRL3 ø16 5.5 5.5 M5 29 15(18.5) 4.5 3.5
depth 3.5
38
Depth 7 Depth 8
6 8 20 3.5
10 45.5 32
5 44 34.5 9 spot face M6 M5
SRG3 ø20 8 5.5 M5 36 18.5(22) 12.5 5.5
Depth 5.5
47
Depth 11 Depth 7
8 10 25.5 4.5
10 54 39.5
5 47.5 37.5 9 spot face M6 M6
SRM3 ø25 11 6 M5 40 20.5(24) 13.5 5.5
Depth 5.5
51
Depth 11 Depth 12
10 12 28 5
10 57.5 42.5
Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
SRT3 Proximity F2S/F3S
dimensions T5H/T5V T3H/T3V T3WH T3WV F2YH/F2YV, F3YH/F3YV
Bore size (mm) HD RD HD RD HD RD HD RD HD RD
MRL2
ø12 1.5 1.5 1.5 1.5 3.5 3.5
ø16 0 4 0 4.5 1 6
MRG2 ø20 3 7.5 3 7.5 5 9.5 7.5 12 6.5 11
ø25 4 9.5 4 9.5 6 11.5 8.5 14 7.5 13
SM‑25 *1 : Only F switch is available for the ø20 or ø25 piping port surface.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
ShkAbs *3: Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
FJ
● Rod end male thread
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

814
 SSD2-Y Series
Single acting/pull
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-YL-12 to 25 -LB SSD2-YL-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

CD
TR
AU socket bolt 8-G
N
SCA2

H 10
4-øAB AK CJ + stroke length
TS Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size CA CB CC CD D E G H N UB
AB AG AH AK AT AU G N TR TS M (mm)
(mm) CAT
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3

ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1

-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.3
20 -0.1
-0.3
MDC2
Code Male thread Code Female thread Male thread
Bore size
WF LF A B LX a’ wf LF A B LX
Bore size WF
With switch
a’ wf
With switch MVC
(mm) (mm) A B CJ A B CJ
ø12 13.5 19.5 40.3 22 10 10.5 13.5 19.5 50.8 22 10 ø12 3.5 45.5 22 39.5 10.5 3.5 56 22 39.5
ø16 13.5 19.5 40.3 22 10 12 13.5 19.5 52.3 22 10 ø16 3.5 46.5 22 40.5 12 3.5 58.5 22 40.5 SMG
ø20 14.5 20.5 51.2 29.5 17.5 14 14.5 20.5 65.2 29.5 17.5 ø20 4.5 61 29.5 52 14 4.5 75 29.5 52
ø25 15 22.5 54.7 32.5 17.5 17.5 15 22.5 72.2 32.5 17.5 ø25 5 67.5 32.5 57.5 17.5 5 85 32.5 57.5
MSD/
MSDG
● Rod side flange (FA) with switch ● Head side flange (FB) with switch
SSD2-YL-12 to 25 -FA SSD2-YL-12 to 25 -FB FM FC*
FM A + stroke length A + stroke length FL
FL WF B + stroke length B + stroke length
WF FT N STK
N FT
2-FD
2-FD SRL3
FH
N
FH
N

SRG3

Mounting bolt 4-G Mounting bolt 4-G SRM3

Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length
a’ wf B + stroke length SRT3
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
ShkAbs
Bore size Bore size
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12 FJ
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size
WF A B a’ wf A B Bore size WF
With switch
a’ wf
With switch Spd
(mm) (mm) A B A B Contr
ø12 13.5 35.5 22 10.5 13.5 46 22 ø12 3.5 31 22 10.5 3.5 41.5 22
ø16 13.5 35.5 22 12 13.5 47.5 22 ø16 3.5 31 22 12 3.5 43 22
ø20 14.5 44 29.5 14 14.5 58 29.5 ø20 4.5 42 29.5 14 4.5 46 29.5 Ending
ø25 15 47.5 32.5 17.5 15 65 32.5 ø25 5 45.5 32.5 17.5 5 63 32.5

815
 SSD2-Y Series
SCP*3
Dimensions
● SSD2-Y-12 to 25 (without switch) ● Rod end male thread
CMK2
ø12/ø16
a’ wf + stroke length
CMA2 c’
T
A
SCM

øMM
F WF + stroke length B
8-J
(Mounting hole) N (at PUSH)
SCG C D
EE

Plug
SCA2 KK (With breathing hole) kk’
Width across
SCS2 flats M
øMM Width across flats H
N
F

CKV2
CAV2/
øK

øI
COVP/N2 8-KA
M
SSD2

SSG
ø20/ø25
SSD

A
CAT
F WF + stroke length B
8-J
N (at PUSH) C D
MDC2 (Mounting hole)
EE
Plug
MVC (With breathing hole)
K

SMG
øMM
N
F

MSD/
MSDG

FC*
øI

8-KA
øK

STK M

SRL3

SRG3

SRM3 Code Without switch

Bore size (mm) A B C D EE F I J K KA KK M MM N WF
SRT3 5 30.5 22 3.5
Stroke length Stroke length Stroke length Stroke length

6.5 spot face M4 M3

ø12 5.5 5.5 M5 25 3.5 32 5 6 15.5
10 40.5 27 depth 3.5 depth 7 depth 6 3.5
MRL2
5 30.5 22 6.5 spot face M4 M4 3.5
ø16 5.5 5.5 M5 29 3.5 38 6 8 20
10 40.5 27 depth 3.5 depth 7 depth 8 3.5
MRG2
5 34 24.5 9 spot face M6 M5 4.5
ø20 8 5.5 M5 36 5.5 47 8 10 25.5
10 44 29.5 depth 5.5 depth 11 depth 7 4.5
SM‑25
5 37.5 27.5 9 spot face M6 M6 5
ø25 11 6 M5 40 5.5 51 10 12 28
10 47.5 32.5 depth 5.5 depth 11 depth 12 5
ShkAbs

● Dimensions of rod end male thread part

FJ
Code
a’ c’ H kk’ M MM T wf
FK Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
Spd ø16 12 10 10 M6 6 8 3.6 3.5
Contr ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
Ending
*1: For dimensions of individual accessories, refer to pages 1046 to 1049.
816
 SSD2-Y Series
Single acting/pull
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch ● Clevis bracket (CB) without switch
SSD2-Y-12 to 25 -LB SSD2-Y-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

CD
TR
AU socket bolt 8-G
N
SCA2

H
4-øAB

10
TS AK CJ + stroke length
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
CAT
-0.3

ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1

-0.4

ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2
ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28
-0.3

20 -0.1
MDC2
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 -0.3

Code Male thread Code Female thread Male thread

Bore size
WF LF A B LX a’ wf LF A B LX
Bore size WF
Without switch
a’ wf
Without switch MVC
(mm) (mm) A B CJ A B CJ
ø12 13.5 19.5 35.3 17 5 10.5 13.5 19.5 45.8 17 5 ø12 3.5 40.5 17 34.5 10.5 3.5 51 17 34.5
ø16 13.5 19.5 35.3 17 5 12 13.5 19.5 47.3 17 5 ø16 3.5 41.5 17 35.5 12 3.5 53.5 17 35.5 SMG
ø20 14.5 20.5 41.2 19.5 7.5 14 14.5 20.5 55.2 19.5 7.5 ø20 4.5 51 19.5 42 14 4.5 65 19.5 42
ø25 15 22.5 44.7 22.5 7.5 17.5 15 22.5 62.2 22.5 7.5 ø25 5 57.5 22.5 47.5 17.5 5 75 22.5 47.5 MSD/
Note: ø20: LB cannot be selected for 5 mm stroke length. MSDG
● Rod side flange (FA) without switch ● Head side flange (FB) without switch
SSD2-Y-12 to 25 -FA SSD2-Y-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size ShkAbs
(mm)
FD FH FL FM FT N G FD FH FL FM FT N G
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
FJ
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16
ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size Bore size WF
Without switch
a’ wf
Without switch
Spd
(mm) WF A B a’ wf A B
(mm) A B A B
ø12 13.5 30.5 17 10.5 13.5 41 17 ø12 3.5 26 17 10.5 3.5 36.5 17 Contr
ø16 13.5 30.5 17 12 13.5 42.5 17 ø16 3.5 26 17 12 3.5 38 17
ø20 14.5 34 19.5 14 14.5 48 19.5 ø20 4.5 32 19.5 14 4.5 46 19.5 Ending
ø25 15 37.5 22.5 17.5 15 55 22.5 ø25 5 35.5 22.5 17.5 5 53 22.5

817
 SSD2-Y Series
SCP*3
Dimensions
● SSD2-YL-32 to 50 (with switch) ● Rod end male thread
CMK2 F A
N WF + stroke length B
(at PUSH) a’ wf + stroke length
CMA2 H C D
c’
8-J EE HD Plug T
(Mounting hole) (With breathing hole)
SCM

øMM
øK
O

SCG KK

SCA2
øMM
kk’
FB
G

N
F

Width across
flats M
SCS2
Width across flats H

CKV2

øI
RD 8-KA
M *4
CAV2/ FA
COVP/N2

SSD2
● SSD2-Y-32 to 50 (without switch)
F A
SSG
N WF + stroke length B
(at PUSH) C D
SSD
8-J H
(Mounting hole) EE Plug
CAT (with breathing hole)
øK
O

MDC2 KK

MVC
øMM
G
F
N

SMG
MSD/
MSDG
øI

8-KA
FC* M

STK
Code Without switch Common dimensions with switch
SRL3 Bore size (mm) A B A B C *6
D *6
EE *5
F FA *3
FB G H I J K KA KK M MM N O WF
5 40 28 50 38
Stroke length Stroke length Stroke length

8 8 23 9 spot face M6 M8
ø32 Rc1/8 45 20.5 49.5 12.5 5.5 60 14 16 34 4.5 7
SRG3 10 50 33 60 43 (10) (5.5) (26.5) depth 5.5 Depth 11 Depth 13
5 46.5 34.5 56.5 44.5 12 8.5 26.5 9 spot face M6 M8
ø40 Rc1/8 52 27.5 57 15 5.5 69 14 16 40 5 7
SRM3 10 56.5 39.5 66.5 49.5 (11.5) (18) (30) depth 5.5 Depth 11 Depth 13
10 58.5 40.5 68.5 50.5 32.5 11 spot face M8 M10
ø50 10.5 10.5 Rc1/4 64 28.5 71 18 6.9 86 17 20 50 7 8
SRT3 20 78.5 50.5 88.5 60.5 (36) depth 6.5 Depth 13 Depth 15

Switch dimensions Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
MRL2 Bore size (mm) HD *1 RD *1 HD *1 RD *1 HD RD
ø32 4 9.5 4 9.5 6 11.5
MRG2 ø40 7 12 7 12 8.5 13.5
ø50 7.5 12.5 7.5 12.5 9 14
SM‑25 *1 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*2 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*3 : Dimensions in ( ) of FA are for the radial lead wire.
ShkAbs
*4 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
FJ *6 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.

● Rod end male thread

FK
Code
a’ c’ H kk’ M MM T wf
Spd Bore size (mm)
Contr ø32 23.5 20.5 22 M14×1.5 14 16 8 5
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Ending
ø50 28.5 26 27 M18×1.5 17 20 11 5

818
 SSD2-Y Series
Single acting/pull
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-Y(L)-32 to 50 -LB SSD2-Y(L)-32 to 50 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CB +00.2
CC CMA2

RMR SCM
AG

E
N
AH SCG
AT
AD

CD
AE

H1
AU Low head hexagon socket bolt 4-G AC

0
N
4-øAB AK N
SCA2
TR CJ + stroke length Mounting bolt 4-G
TS LF LX + stroke length E

A + stroke length
Rod end male thread SCS2
Rod end male thread A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length
CKV2
CAV2/
COVP/N2

SSD2

LF CJ + stroke length
SSG
Code Common dimensions Female thread Code Common dimensions
Bore size Bore size
AB AD AE AG AH AK AT AU G N TR AC CB CC CD D E G MR N UB
(mm) (mm) SSD
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 ø40 5 18.2 14 10 6 52 M6×16 10 40 36
ø50
Code
9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79
Code
ø50 6 22.2
Female thread
20 14 7 64 M8×20 14 50 44
CAT
Bore size Without switch With switch Bore size Without switch With switch
TS M WF LF WF
(mm) A B LX A B LX (mm) A B CJ A B CJ
ø32 71 7.2 17 25 47.2(57.2) 23(33) 7(17) 57.2 33 17 ø32 7 60 23 50 70 33 60 MDC2
ø40 78 7.2 17 25 53.7(63.7) 29.5(39.5) 13.5(23.5) 63.7 39.5 23.5 ø40 7 68.5 29.5 58.5 78.5 39.5 68.5
ø50 95 8.2 18 29.5 56.7(66.7) 30.5(40.5) 7.5(17.5) 66.7 40.5 17.5 ø50 8 80.5 30.5 66.5 90.5 40.5 76.5
Code Male thread Code Male thread MVC
Bore size Without switch With switch Bore size Without switch With switch
a’ wf LF a’ wf
(mm) A B LX A B LX (mm) A B CJ A B CJ
ø32
ø40
23.5
23.5
15
15
23
23
68.7(78.7)
75.2(85.2)
23(33)
29.5(39.5)
7(17)
13.5(23.5)
78.7 33 17
85.2 39.5 23.5
ø32
ø40
23.5
23.5
5
5
81.5
90
23
29.5
48
56.5
91.5
100
33
39.5
58
66.5
SMG
ø50 28.5 15 26.5 82.2(92.2) 30.5(40.5) 7.5(17.5) 92.2 40.5 17.5 ø50 28.5 5 106 30.5 63.5 116 40.5 73.5
* Dimensions in ( ) are for stroke lengths of more than 50 mm. MSD/
MSDG
● Rod side flange (FA) ● Head side flange (FB)
SSD2-Y(L)-32 to 50 -FA SSD2-Y(L)-32 to 50 -FB FC*
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
N 4-FD WF B + stroke length FT N 4-FD STK
FT

SRL3
FH
FC

FH
FC

SRG3
Mounting bolt 4-G
Mounting bolt 4-G SRM3
ø32 to ø63: Hexagon socket button head bolt Rod end male thread ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt A + stroke length
A + stroke length ø80/ø100: Special bolt
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT SRT3
FT

MRL2

MRG2

Code Common dimensions

Code Common dimensions
SM‑25
Bore size Bore size
FC FD FH FL FM FT N G FC FD FH FL FM FT N G
(mm) (mm)
ø32
ø40
34
40
5.5
5.5
48
54
56
62
65
72
8
8
34
40
M6×16
M6×16
ø32 34 5.5 48 56 65 8 34 M6×16 ShkAbs
ø50 50 6.6 67 76 89 9 50 M8×20 ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20
Code Female thread
Code Female thread FJ
Bore size Without switch With switch Bore size Without switch With switch
WF WF
(mm) A B A B (mm) A B A B
ø32 17 40(50) 23(33) 50 33
ø40 17 46.5(56.5) 29.5(39.5) 56.5 39.5 ø32 7 38 23 48 33 FK
ø50 18 48.5(58.5) 30.5(40.5) 58.5 40.5 ø40 7 44.5 29.5 54.5 39.5
ø50 8 47.5 30.5 57.5 40.5
Code Male thread
Code Male thread Spd
Bore size
(mm)
a’ wf
Without switch
A B
With switch
A B
Bore size
a’ wf
Without switch With switch Contr
(mm) A B A B
ø32 23.5 15 61.5(71.5) 23(33) 71.5 33
ø40 23.5 15 68(78) 29.5(39.5) 78 39.5 ø32 23.5 5 59.5 23 69.5 33
ø50 28.5 15 74(84) 30.5(40.5) 84 40.5 ø40 23.5 5 66 29.5 76 39.5 Ending
* Dimensions in ( ) are for stroke lengths of more than 50 mm. ø50 28.5 5 73 30.5 83 40.5

819
 Compact cylinder double acting/heat resistant

SSD2-T1 Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SSD2-T1
Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CKV2
Ambient temperature °C 5 (41°F) to 150 (302°F)
CAV2/ Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
COVP/N2 Stroke tolerance mm +1.0
0
Working piston speed mm/s 50 to 500 50 to 300
SSD2 Cushion None
Lubrication Not available
SSG Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
*1: The ø32 bore size with a 5 mm stroke has a port size of M5.
SSD Stroke length
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
CAT 5/10/15/20
ø12
30
ø16 25/30
MDC2 ø20 5/10/15/20/25
50
ø25 30/35/40/45/50
MVC ø32 5/10/15/20/25/30/
1
ø40 35/40/45/50/75/100
SMG ø50
10/15/20/25 100
ø63
MSD/ 30/35/40/45/50
ø80
MSDG ø100
75/100

FC* *: Refer to pages 763 and 765 for the min. stroke length with mounting bracket LB.
Custom stroke length A + stroke length
STK ● SSD2-T1 Series B + stroke length
Standard products
SRL3 Item
Standard stroke length body with spacer
Model No. Refer to How to order.
SRG3 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
SRM3 Bore size Stroke range
12/16 1 to 29
SRT3 Stroke range
20 to 25 1 to 49
32 to 100 1 to 99
MRL2 Model No.: SSD2-T32-38
Example of model No. A +2 mm spacer is added to the SSD2-T32-40 standard cylinder to
MRG2 create 38 mm stroke length. B + stroke length is 63 mm.

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
SM‑25
Stroke length (mm)
5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm)
ShkAbs
ø12 36 44 53 61 70 72 - - - - - -
ø16 48 59 69 80 91 102 - - - - - -
FJ ø20 63 75 88 101 113 126 139 152 165 203 - -
ø25 87 102 118 134 150 165 181 197 213 228 - -
FK ø32 122 144 166 188 209 231 253 275 297 318 494 604
ø40 183 210 236 263 290 316 342 369 395 472 646 776
Spd ø50 - 341 383 425 467 510 552 594 636 678 1025 1235
Contr
ø63 - 507 562 617 672 727 782 838 893 948 1438 1713
ø80 - 928 1015 1101 1188 1274 1361 1448 1535 1621 2401 2833
Ending
ø100 - 1433 1547 1660 1774 1888 2002 2115 2229 2343 3406 3973

820
 SSD2-T1 Series
How to order
How to order Code Description
SCP*3
SSD2-T1 12 5 N LB I A Bore size (mm)
12 ø12
CMK2
16 ø16
20 ø20
A Bore size 25 ø25
CMA2
32 ø32
40 ø40 SCM
50 ø50
63 ø63 SCG
80 ø80
100 ø100 SCA2
B Port thread
B Port thread SCS2
Blank Rc thread
NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product) CKV2
C Stroke length (mm) CAV2/
C Stroke length
Refer to the stroke length table below. COVP/N2

D Option
SSD2
D Option *1
Blank Rod end female thread
N Rod end male thread SSG
M Piston rod material (stainless steel)
SSD
E Mounting bracket
E Mounting bracket
Blank Without mounting bracket
*2
LB Axial foot
CAT
*3
CB Clevis bracket (pin and snap ring included)
FA Rod side flange MDC2
FB Head side flange
F Accessory (available when rod end male thread “N” is selected)
MVC
F Accessory I Rod eye
*4 SMG
Y Rod clevis (pin and snap ring included)
Precautions for model No. selection MSD/
[Stroke length table] MSDG
*1 : Piston rod of ø12 to ø25 is stainless steel as standard.
C snap ring is stainless steel instead of steel. The rod
Stroke length Applicable bore size
end male thread nut is stainless steel. (mm) ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 FC*
*2 : The mounting bracket is included at shipment. 5 ● ● ● ● ● ●
*3 : The projection dimension of piston rod WF when STK
LB or FA is selected is different from that of the 10 ● ● ● ● ● ● ● ● ● ●
standard. Refer to the dimensions on pages 761, 15 ● ● ● ● ● ● ● ● ● ●
763, 765 and 766. The number of the specified SRL3
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ●
protruding dimension will be added at the end of
the model No. printed on the metal plate on the 25 ● ● ● ● ● ● ● ● ● ●
SRG3
body. 30 ● ● ● ● ● ● ● ● ● ●
*4 : “I” and “Y” cannot be selected together.
*5 : Refer to pages 750 and 751 for combinations of 35 ● ● ● ● ● ● ● ● SRM3
variations/options. 40 ● ● ● ● ● ● ● ●
45 ● ● ● ● ● ● ● ● SRT3
[Example of model No.] 50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ● MRL2
SSD2-T1-12-5-N
100 ● ● ● ● ● ●
Model: Compact cylinder, heat resistant
Min. stroke length (mm) 1 MRG2
●
A Bore size : ø12 mm
●
B Port thread : Rc thread Max. stroke length (mm) 30 50 100
SM‑25
●
C Stroke length : 5mm Custom stroke length *1 In 1 mm increments
●
D Option : Rod end male thread *1: T
‌ he total length when using a custom stroke length is the same as that when using the
next longer standard stroke length.
ShkAbs
*2: Refer to pages 763 and 765 for the min. stroke length with mounting bracket
How to order mounting bracket LB. FJ
Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 FK
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100 Spd
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100 Contr
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
Ending
*1: The foot mounting bracket is provided as 2 pcs./set.

821
 SSD2-T1 Series
SCP*3
Internal structure and parts list
● SSD2-T1-12 to 25 ● SSD2-T1-32 to 50
CMK2
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
● SSD2-T1-63 to 100
SSG
1 6 2 3 4 10 5 7 8 9

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*
No. Part name Material Remarks No. Part name Material Remarks
STK ø12 to ø25: Stainless steel ø16 to ø100: 7 Piston Aluminum alloy Chromate
1 Piston rod
ø32 to ø100: Steel Industrial chrome plating 8 Piston packing Fluoro rubber
SRL3 2 C snap ring Steel Zinc phosphate ø12 to ø25: Stainless steel
9 Cover ø32 to ø100: Alumite
ø12 to ø50: Special aluminum ø12 to ø50: Alumite ø32 to ø100: Aluminum alloy
3 Rod metal
SRG3 ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 10 Bush Oiles drymet
4 Rod metal gasket Fluoro rubber
SRM3 5 Body Aluminum alloy Hard alumite
6 Rod packing Fluoro rubber
SRT3
Repair parts list
MRL2
Bore size (mm) Kit No. Repair parts No.
ø12 SSD2-T-12K
MRG2
ø16 SSD2-T-16K
ø20 SSD2-T-20K
SM‑25
ø25 SSD2-T-25K
ø32 SSD2-T-32K
ShkAbs 4 6 8
ø40 SSD2-T-40K
ø50 SSD2-T-50K
FJ
ø63 SSD2-T-63K
ø80 SSD2-T-80K
FK
ø100 SSD2-T-100K
Spd
Contr
Dimensions
Ending
Same as double acting/single rod. Refer to pages 760 to 766.
822
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

823
 Compact cylinder double acting/with heat resistant cylinder switch

SSD2-T1L Series
SCP*3 ● Bore size: ‌ø16/ø20/ø25/ø32/ø40
CMK2
ø50/ø63
JIS symbol
CMA2

SCM
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
SCG Item SSD2-T1L
Bore size mm ø16 ø20 ø25 ø32 ø40 ø50 ø63
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C 5 (41°F) to 150 (302°F) (*1)
CAV2/
COVP/N2 Port size M5 Rc1/8 Rc1/4
+1.0
Stroke tolerance mm 0
SSD2 Working piston speed mm/s 50 to 500 50 to 300
Cushion None
SSG Lubrication (*2) -
*1: At an ambient temperature of 150°C, external leakage will occur gradually after approximately 500,000 uses.
SSD *2: Periodically apply additional heat-resistant grease.

CAT

MDC2 Stroke length

Standard stroke Max. stroke length Min. stroke length (mm)
Bore size (mm)
MVC length (mm) (mm) With 1 switch With 2 switches
ø16 10/15/20/25/30 30 10 20
SMG ø20 15/20/25/30/ 25
50 15
ø25 35/40/45/50
MSD/
ø32
MSDG
ø40 15/20/25/30/35/ 20
100 15
FC* ø50 40/45/50/70/100
ø63
STK Note: ‌The custom stroke length is available in 1 mm increments. (Less than 7 mm is not available.) However, the total
length is the same as that of the next longer standard stroke length.

SRL3

SRG3 Custom stroke length

● SSD2-T1L Series
SRM3 Standard products A + stroke length
Item
Standard stroke length body with spacer B + stroke length
SRT3 Model No. Refer to How to order.
Description A spacer is added to the standard stroke length body to adjust the stroke length in 1 mm increments.
MRL2 Bore size Stroke range
12/16 1 to 29
MRG2 Stroke range
20 to 25 1 to 49
32 to 63 1 to 99
SM‑25 Model No.: SSD2-T1L-32-38
Example of model No. A +2 mm spacer is added to the SSD2-T1L-32-40 standard cylinder to create 38 mm stroke length.
ShkAbs B + stroke length is 73 mm.

FJ

FK
Spd
Contr

Ending

824
 SSD2-T1L Series
Specifications
Cylinder switch specifications SCP*3
Reed 2-wire
Item
ET0H, ET0V CMK2
Applications For relay, programmable controller
Load voltage 12/24 VDC 110 VAC CMA2
Load current 5 to 50 mA 7 to 20 mA
Internal voltage drop 3.0 V or less SCM
Leakage current 0mA
LED SCG
Indicator lamp
(Lit when ON) (Note)
Heat-resistant fluorine-insulated sheathed wire 1 m
Lead wire SCA2
(0.5SQ (100/0.08) annealed copper wire x 2C)
Insulation resistance 100 MΩ and over with 500 VDC megger
SCS2
Withstand voltage No failure after 1 minute of 1,000 VAC application.
Max. shock resistance 294 m/s2
CKV2
Ambient temperature -10 to 150°C
IEC standards IP67, CAV2/
Degree of protection
JIS C0920 (water-tight) COVP/N2
Weight g 40
Note: Indicator uses LED. Visibility will gradually decrease with continuous use under high temperatures.
SSD2
 As the LED lamp circuit is separated from the switch output circuit, the switch output works normally even if the LED lamp goes out.
SSG

SSD
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
CAT
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø16 71 127 82 127 92 137 103 148 114 159 125 170 - - - - - - - - - - - - MDC2
ø20 63 118 75 150 88 163 101 176 113 188 126 201 139 214 152 227 165 240 203 278 - - - -
ø25 87 178 102 193 118 209 134 225 150 241 165 256 181 272 197 288 213 304 228 319 - - - - MVC
ø32 122 236 144 258 166 280 188 302 209 323 231 345 253 367 275 389 297 411 318 432 494 542 604 652
ø40 183 326 210 353 236 379 263 406 290 433 316 459 342 485 369 512 395 538 472 565 646 695 776 825 SMG
ø50 - - 341 535 383 577 425 619 467 661 510 704 552 746 594 788 636 830 678 872 1025 1082 1235 1292
MSD/
ø63 - - 507 786 562 841 617 896 672 951 727 1006 782 1061 838 1117 893 1172 948 1227 1438 1502 1713 1777 MSDG

FC*

Theoretical thrust table (Unit: N) STK

Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SRL3
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102 SRG3
Push - 31.4 47.1 62.8 94.2 1.26×10 1.57×10 1.88×10 2.20×102 2.51×102 2.83×102 3.14×102
2 2 2
ø20 SRM3
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25 SRT3
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push - 80.4 1.21×10 1.61×10 2.41×10 3.22×10 4.02×10 4.83×10 5.63×10 6.43×10 7.24×10 8.04×10
2 2 2 2 2 2 2 2 2 2
ø32 MRL2
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40 MRG2
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 SM‑25
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103 ShkAbs
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
FJ

FK
Spd
Contr

Ending

825
 SSD2-T1L Series
SCP*3
How to order
SSD2-T1L 16 10 ET0H D N LB I
CMK2
Double acting/heat resistant
with compact heat resistant switch
CMA2
Code Description
A Bore size A Bore size (mm)
SCM
16 ø16

SCG 20 ø20
25 ø25
SCA2 32 ø32
40 ø40
SCS2 50 ø50
63 ø63
CKV2 B Port thread
B Port thread
CAV2/ Blank Rc thread
COVP/N2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
SSD2
C Stroke length (mm)
C Stroke length
SSG
Refer to the stroke length table on the following page.
SSD
D Switch model No.
D Switch model No.
ET0H Axial lead wire
CAT Reed AC/DC 2-wire
ET0V Radial lead wire

MDC2 E Switch quantity

E Switch quantity
R 1 on rod side
MVC H 1 on head side
D 2
SMG
F Option
F Option *1
MSD/ Blank Rod end female thread
MSDG N Rod end male thread
FC*
Precautions for model No. selection M Piston rod material (stainless steel)
*1 : Piston rod of ø12 to ø25 is stainless steel as G Mounting bracket
standard. C snap ring is stainless steel instead of G Mounting bracket
STK steel. The rod end male thread nut is stainless steel. Blank Without mounting bracket
*2
*2 : The mounting bracket is included at shipment. *3 LB Axial foot
SRL3 *3 : The projection dimension of piston rod WF CB Clevis bracket (pin and snap ring included)
when LB or FA is selected is different from
that of the standard. Refer to the dimensions FA Rod side flange
SRG3 on pages 830 and 831. The number of the FB Head side flange
specified protruding dimension will be added
SRM3 at the end of the model No. printed on the H Accessory (available when rod end male thread “N” is selected)
metal plate on the body. H Accessory
*4 : “I” and “Y” cannot be selected together. *4 I Rod eye
SRT3 *5 : Refer to pages 750 and 751 for combinations Y Rod clevis (pin and snap ring included)
of variations/options.
*6 : Switches are shipped with the product.
MRL2 Contact CKD if assembling before shipment is
necessary.
MRG2
[Example of model No.]
SM‑25
SSD2-T1L-16-10-ET0H-D-N
Model: Compact cylinder
ShkAbs
with heat resistant cylinder switch
●
A Bore size : ø16 mm
FJ ●
B Port thread : Rc thread
●
C Stroke length : 10mm
FK ●
D Switch model No. : ‌Reed switch ET0H, lead
wire length 1 m
Spd ● E Switch quantity : 2 pcs. included
Contr F Option
● :R od end male thread

Ending

826
 SSD2-T1L Series
How to order
[Stroke length table] How to order switch SCP*3
Stroke length (mm)
Applicable bore size SW ET0H
ø16 ø20 ø25 ø32 ø40 ø50 ø63 CMK2
10 ●
15 ● ● ● ● ● ● ● Switch model No. CMA2
20 ● ● ● ● ● ● ● (Item D on page 826)
Standard stroke length

25 ● ● ● ● ● ● ●
SCM
30 ● ● ● ● ● ● ●
SCG
35 ● ● ● ● ● ●
40 ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ●
50 ● ● ● ● ● ● SCS2
70 ● ● ● ●
100 ● ● ● ● CKV2
Min. stroke length (mm) 10(20) 15(25) 15(20) 15(20)
CAV2/
Max. stroke length (mm) 30 50 100
COVP/N2
Custom stroke length *2 In 1 mm increments
*1 : The value in ( ) is for types with two switches. SSD2
Refer to page 824 for the min. stroke length with switch.
*2 : The total length is the same as that of the next longer standard stroke length. SSG

SSD

CAT

How to order mounting bracket MDC2

Bore size (mm)
ø16 ø20 ø25 ø32 ø40 ø50 ø63
Mounting bracket MVC
Foot (LB) SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63
Flange (FA/FB) SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SMG
Clevis bracket (CB) SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63
MSD/
*1: The foot mounting bracket is provided as 2 pcs./set.
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

827
 SSD2-T1L Series
SCP*3
Internal structure and parts list
● SSD2-T1L-16 to 25 ● SSD2-T1L-32 to 50
CMK2
1 2 3 4 5 6 7 8 10 9 11 1 2 3 4 5 6 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG ● SSD2-T1L-63

SSD 1 6 2 3 4 12 5 7 8 10 9 11

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3 No. Part name Material Remarks No. Part name Material Remarks
ø16 to ø25: Stainless steel Industrial chrome 7 Spacer Aluminum alloy ø32: Chromate
1 Piston rod
SRT3 ø32 to ø63: Steel plating 8 Magnet Special alloy
2 C snap ring Steel Zinc phosphate ø16 to ø32: Aluminum alloy
9 Piston ø32: Chromate
MRL2 ø16 to ø50: Special aluminum ø16 to ø50: Alumite ø40 to ø63: Stainless steel
3 Rod metal
ø63: Aluminum alloy ø63: Chromate 10 Piston packing Fluoro rubber
MRG2 4 Rod metal gasket Fluoro rubber ø16 to ø25: Stainless steel
11 Cover ø32 to ø100: Alumite
5 Body Aluminum alloy Hard alumite ø32 to ø63: Aluminum alloy
SM‑25 6 Rod packing Fluoro rubber 12 Bush Oiles drymet
Fluorine grease is used.
ShkAbs
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FJ
ø16 SSD2-T-16K
ø20 SSD2-T-20K
FK
ø25 SSD2-T-25K
Spd ø32 SSD2-T-32K 4 6 10
Contr ø40 SSD2-T-40K
ø50 SSD2-T-50K
Ending ø63 SSD2-T-63K

828
 SSD2-T1L Series
Double acting/with heat resistant cylinder switch
Dimensions SCP*3
● SSD2-T1L-16 to 63 ● Rod end male thread
a’ wf CMK2
c’
T CMA2

SCM

SCG
kk’
Width across flats H

øMM
SCA2
Width across flats M
· ø16 · ø20 to ø63
A + stroke length SCS2
B + stroke length
2-EE
F WF C D
CKV2
F N HD
8-J
Mounting N H 8-J
hole
CAV2/
Mounting hole
COVP/N2
O

KK
SSD2

SSG
FB
N
F

øMM
FB
F
N

SSD
FA

CAT
øK

RD 8-KA
øK

øI
M
MDC2
M FA
FB
MVC
FA

Code Common dimensions with switch SMG

Bore size (mm) A *1 B *1 C D EE F FA FB G H I J K KA KK M MM N O WF
ø16 35.5 32 5.5 5.5 M5 29 21 8 - - 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 - 3.5 MSD/
MSDG
ø20 34 29.5 8 5.5 M5 36 24.5 16 - - 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 - 4.5
ø25 37.5 32.5 11 6 M5 40 26.5 17 - - 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 - 5 FC*
ø32 40 33 8 8 Rc1/8 45 29 24 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 7
ø40 46.5 39.5 12 8.5 Rc1/8 52 32.5 31 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7 STK
ø50 48.5 40.5 10.5 10.5 Rc1/4 64 38.5 32 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8
ø63 54 46 13 11 Rc1/4 77 45 32 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15 17 20 60 7 8 SRL3
Switch dimensions Reed ET0H/ET0V
Bore size (mm) HD RD SRG3
ø16 0.5 0
ø20 0 0 SRM3
ø25 0 0.5
ø32 0.5 2 SRT3
ø40 1.5 7
ø50 1.5 6 MRL2
ø63 5.5 5.5
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke MRG2
length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049. SM‑25
● Rod end male thread
ShkAbs
Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
FJ
ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
FK
ø25 17.5 15 17 M10×1.25 10 12 6 5
ø32 23.5 20.5 22 M14×1.5 14 16 8 5 Spd
ø40 23.5 20.5 22 M14×1.5 14 16 8 5 Contr
ø50 28.5 26 27 M18×1.5 17 20 11 5
ø63 28.5 26 27 M18×1.5 17 20 11 5
Ending

829
 SSD2-T1L Series
SCP*3
Dimensions with mounting bracket
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
CMK2 SSD2-T1L-16 to 25 -LB SSD2-T1L-16 to 25 -CB
A + stroke length A + stroke length UB
CMA2 WF B + stroke length M WF B + stroke length D
N CB
CC H
SCM
AG
N

SCG

øCA

E
N
AT
AH

Low head hexagon

SCA2 AU socket bolt 8-G

CD
TR N
4-øAB

H
AK CJ + stroke length

10
TS Mounting bolt 4-G E
SCS2 LF LX + stroke length
Rod end male thread
Rod end male thread
A + stroke length
CKV2 A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

SSG CJ + stroke length

LF

SSD Code Common dimensions Female thread Code Common dimensions

Bore size Bore size
CAT AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm)
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.1
-0.4

ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
MDC2
-0.3

ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28 20 -0.1
-0.3

Code Male thread Code Female thread Male thread

MVC Bore size Bore size
WF LF A B LX a’ wf LF A B LX (mm)
WF A B CJ a’ wf A B CJ
(mm)
ø16 13.5 19.5 50.3 32 20 12 13.5 19.5 62.3 32 20 ø16 3.5 56.5 32 50.5 12 3.5 68.5 32 50.5
SMG ø20 14.5 20.5 51.2 29.5 17.5 14 14.5 20.5 65.2 29.5 17.5 ø20 4.5 61 29.5 52 14 4.5 75 29.5 52
ø25 15 22.5 54.7 32.5 17.5 17.5 15 22.5 72.2 32.5 17.5 ø25 5 67.5 32.5 57.5 17.5 5 85 32.5 57.5
MSD/
MSDG
● Rod side flange (FA) with switch ● Head side flange (FB) with switch
FC* SSD2-T1L-16 to 25 -FA SSD2-T1L-16 to 25 -FB FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length B + stroke length
STK WF FT N
N FT
2-FD
SRL3 2-FD
FH
N
FH
N

SRG3

SRM3 Mounting bolt 4-G Mounting bolt 4-G

Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length
SRT3 a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25

ShkAbs Code Common dimensions Code Common dimensions

Bore size Bore size
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
FJ ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
FK ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16
Code Female thread Male thread Code Female thread Male thread
Spd Bore size Bore size
Contr WF A B a’ wf A B WF A B a’ wf A B
(mm) (mm)
ø16 13.5 45.5 32 12 13.5 57.5 32 ø16 3.5 41 32 12 3.5 53 32
Ending ø20 14.5 44 29.5 14 14.5 58 29.5 ø20 4.5 42 29.5 14 4.5 56 29.5
ø25 15 47.5 32.5 17.5 15 65 32.5 ø25 5 45.5 32.5 17.5 5 63 32.5

830
 SSD2-T1L Series
Double acting/with heat resistant cylinder switch
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-T1L -32 to 63 -LB SSD2-T1L -32 to 63 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CB +00.2
CC CMA2

R MR SCM
AG

E
N
AH SCG
AT
AD

CD
AE

H1
AU Low head hexagon socket bolt 4-G AC
SCA2

0
N
TR 4-øAB AK CJ + stroke length Mounting bolt 4-G N
TS LF LX + stroke length E

A + stroke length
Rod end male thread SCS2
Rod end male thread A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length
CKV2
CAV2/
COVP/N2

SSD2

LF CJ + stroke length
SSG
Code Common dimensions Female thread Code Common dimensions
Bore size Bore size SSD
AB AD AE AG AH AK AT AU G N TR TS AC CB CC CD D E G MR N UB
(mm) (mm)
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 ø40 5 18.2 14 10 6 52 M6×16 10 40 36 CAT
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 ø50 6 22.2 20 14 7 64 M8×20 14 50 44
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 ø63 7 22.2 20 14 8 77 M10×25 14 60 44
Code Male thread
MDC2
Code Female thread Male thread
Bore size Bore size
M WF LF A B LX a’ wf LF A B LX WF A B CJ a’ wf A B CJ
(mm) (mm) MVC
ø32 7.2 17 25 57.2 33 17 23.5 15 23 78.7 33 17 ø32 7 70 33 60 23.5 5 91.5 33 58
ø40 7.2 17 25 63.7 39.5 23.5 23.5 15 23 85.2 39.5 23.5 ø40 7 78.5 39.5 68.5 23.5 5 100 39.5 66.5
ø50 8.2 18 29.5 66.7 40.5 17.5 28.5 15 26.5 92.2 40.5 17.5 ø50 8 90.5 40.5 76.5 28.5 5 116 40.5 73.5 SMG
ø63 9.2 18 31 73.2 46 20 28.5 15 28 98.7 46 20 ø63 8 98 46 84 28.5 5 123.5 46 81
* Dimensions in ( ) are for stroke lengths of more than 50 mm. MSD/
MSDG
● Rod side flange (FA) ● Head side flange (FB)
SSD2-T1L -32 to 50 -FA SSD2-T1L -32 to 50 -FB FC*
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
N 4-FD WF B + stroke length FT N 4-FD STK
FT

SRL3
FH
FC

FH
FC

SRG3
Mounting bolt 4-G
Mounting bolt 4-G SRM3
ø32 to ø63: Hexagon socket button head bolt Rod end male thread ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt A + stroke length
A + stroke length ø80/ø100: Special bolt
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT SRT3
FT

MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
Bore size Bore size
FC FD FH FL FM FT N G FC FD FH FL FM FT N G ShkAbs
(mm) (mm)
ø32 34 5.5 48 56 65 8 34 M6×16 ø32 34 5.5 48 56 65 8 34 M6×16
ø40 40 5.5 54 62 72 8 40 M6×16 ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20 ø50 50 6.6 67 76 89 9 50 M8×20 FJ
ø63 60 9 80 92 108 9 60 M10×25 ø63 60 9 80 92 108 9 60 M10×25
Code Female thread Male thread Code Female thread Male thread
FK
Bore size Bore size
(mm)
WF A B a’ wf A B WF A B a’ wf A B
(mm)
ø32 17 50 33 23.5 15 71.5 33 ø32 7 48 33 23.5 5 69.5 33 Spd
ø40 17 56.5 39.5 23.5 15 78 39.5 ø40 7 54.5 39.5 23.5 5 76 39.5 Contr
ø50 18 58.5 40.5 28.5 15 84 40.5 ø50 8 57.5 40.5 28.5 5 83 40.5
ø63 18 64 46 28.5 15 89.5 46 ø63 8 63 46 28.5 5 88.5 46
Ending
* Dimensions in ( ) are for stroke lengths of more than 50 mm.

831
 Compact cylinder high load/rubber-air cushioned

SSD2-K-*C Series
SCP*3 ● Bore size: ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD-K-*C
Item
SSD-KL-*C (with switch)
Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.25 (≈36 psi, 2.5 bar) 0.2 (≈29 psi, 2 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
CAV2/ Port size Rc1/8 Rc1/4 Rc3/8
COVP/N2 Stroke tolerance mm +2.0
0

Working piston speed mm/s 50 to 500 50 to 300

SSD2 Cushion Rubber-air cushion
Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
SSG Allowable absorbed energy J 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92

Stroke length Min. stroke length with switch (2 switches)

SSD
Bore size Standard stroke length Max. stroke length Min. stroke length Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) (mm) (mm) (mm) (mm)
CAT ø20 ø20
5/10/15/20/25/30/
50
ø25 35/40/45/50 ø25
MDC2 ø32 5/10/15/20/25/30/ 5 ø32 5
ø40 35/40/45/50/75/100 ø40
5
MVC ø50
100
ø50
ø63 10/15/20/25/30/35/ ø63
ø80 40/45/50/75/100 10 ø80 10
SMG
ø100 ø100
MSD/ *1 : The custom stroke length is available in 1 mm increments. However, the total length is the *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or
MSDG same as that of the next longer standard stroke length. T8* switch is not available.
*2 : Refer to page 789 for the min. stroke length with mounting bracket LB.
A + stroke length
FC* Custom stroke length B + stroke length

STK
● SSD2-K-*C Series
Standard products
Item
SRL3 Standard stroke length body with spacer
Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the stroke
SRG3 Description
length in 1 mm increments.
Bore size Stroke range
SRM3
Stroke range 20 to 25 1 to 49
32 to 100 1 to 99
SRT3
Model No.: SSD2-K-32C-38
Example of model No. A +2 mm spacer is added to the SSD2-K-32C-40 standard cylinder to
MRL2 create 38 mm stroke length. B + stroke length is 73 mm. Data of the reduction of collision noise level (an example case)
80
Collision noise level (dB(A))

MRG2 Rubber-air cushion mechanism 70

60
SM‑25
50
Rubber-air Rubber-air
ShkAbs cushion cushion 40
0 0.5 1 1.5
Kinetic energy (J)
Cover Cover
FJ Data of the reduction of collision acceleration level (an example case)
Collision acceleration (G)

20
FK When V = 300mm/s

Spd When pulled

10
Contr An airtight space is created in the ■ area when the piston operates and the rubber-air cushion and cover make
When V = 100mm/s
contact. Air in the airtight area is further compressed, absorbing energy as the piston operates.
At the end of the stroke, energy generated by compression distortion of the rubber cushion is also added.
Ending 0
0 0.5 1 1.5 2
Kinetic energy (J)
Cylinder with rubber cushion
832 Cylinder with rubber-air cushion
 SSD2-K-*C Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire CMK2
Item F2YH/ F3PH/F3PV
F2S F3S F2H/F2V F3H/F3V F3YH/F3YV
F2YV (made to order) CMA2
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay SCM
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCG
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less SCA2
Yellow LED Red/green Red/green
LED Yellow LED
Indicator lamp
(Lit when ON)
(Lit when LED
(Lit when ON)
LED SCS2
ON) (Lit when ON) (Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less CKV2
Weight g 1 m:10 3 m:29
CAV2/
Switch specifications (T switch) COVP/N2
● 1-color/2-color display/for AC magnetic field proof
SSD2
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4) SSG
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For SSD
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output - CAT
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10% MDC2
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
MVC
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without LED
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED
lamp (Lit when ON) indicator lamp (Lit when ON) SMG
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON)
≤ 1 mA at 100 VAC, MSD/
Leakage current 1 mA or less 10 μA or less 0 mA 1 mA or less
≤ 2 mA at 200 VAC MSDG
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 FC*
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
STK
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. SRL3
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
SRG3
*5 : The F type switch uses a bend-resistant lead wire.

Theoretical thrust table (Unit: N) SRM3

Bore size Operating Working pressure MPa
(mm) direction 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SRT3
Push - 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20 MRL2
Pull - 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 1.47×10 2
1.96×10 2
2.45×10 2
2.95×10 2
3.44×10 2
3.93×10 2
4.42×10 2
4.91×10 2
ø25 MRG2
Pull - 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32 SM‑25
Pull 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40 ShkAbs
Pull 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50 FJ
Pull 3.30×10 2
4.95×10 2
6.60×10 2
8.25×10 2
9.90×10 2
1.15×10 3
1.32×10 3
1.48×10 3
1.65×103
Push 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
ø63 FK
Pull 5.61×10 2
8.41×10 2
1.12×10 3
1.40×10 3
1.68×10 3
1.96×10 3
2.24×10 3
2.52×10 3
2.80×103
Push 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 Spd
ø80 Contr
Pull 9.07×10 2
1.36×10 3
1.81×10 3
2.27×10 3
2.72×10 3
3.17×10 3
3.63×10 3
4.08×10 3
4.54×103
Push 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100
Pull 1.43×10 3
2.14×10 3
2.86×10 3
3.57×10 3
4.29×10 3
5.00×10 3
5.72×10 3
6.43×10 3
7.15×103
Ending

833
 SSD2-K-*C Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Bore size (mm)
CMK2 SSD2-K 40 C 10 N LB I 20 ø20
25 ø25
With switch (built-in magnet for switch)
32 ø32
CMA2 SSD2-KL 40 C 10 T0H R N LB I 40 ø40
50 ø50
SCM A Bore size 63 ø63
80 ø80
Rubber-air
SCG cushioned 100 ø100
B Port thread
SCA2 B Port thread
Blank Rc thread
N NPT thread (ø32 and over) (made-to-order product)
SCS2 G G thread (ø32 and over) (made-to-order product)
C Stroke length (mm)
CKV2 C Stroke length
Refer to the stroke length table on the following page.
CAV2/
COVP/N2 D Switch model No.
D Switch model No.
Voltage Bore size

Contact
Lead wire Lead wire Lead
SSD2 *6 Display
wire
Straight L-shaped AC DC 20 25 32 40 50 63 80 100
- F2S* ● 2-wire ● ●
SSG - F3S* ● 3-wire ● ●
1-color display
● ● ●

Proximity
F2H* F2V* 2-wire
SSD F3H* F3V* ● 3-wire ● ●
F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
CAT E Switch quantity F2YH* F2YV* ●
2-color display
2-wire ● ●
F3YH* F3YV* ● 3-wire ● ●
MDC2 T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

F Option T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

*1 T8H* T8V* ● ● 1-color display ● ● ● ● ●
MVC
Precautions for model No. selection T1H* T1V* ●
2-wire
● ● ● ● ● ● ● ●
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
SMG *1 : Piston rod of ø20 and ø25 is stainless steel as
T3H* T3V* ● ● ● ● ● ● ● ● ●
standard. C snap ring is stainless steel instead of 3-wire
MSD/ steel. The rod end male thread nut is stainless steel. T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
Proximity

MSDG *2 : The mounting bracket is included at shipment. T2WH* T2WV*

2-wire
*3 : The projection dimension of piston rod WF T2YH* T2YV* ● ● ● ● ● ● ● ● ●
when LB or FA is selected is different from 2-color display
FC* T3WH* T3WV* ● ● ● ● ● ● ● ● ●
that of the standard. Refer to the dimensions 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
on pages 761, 763, 765 and 766. The number
STK of the specified protruding dimension will be T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
added at the end of the model No. printed on T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
the metal plate on the body. T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
SRL3 *4 : ”I” and “Y” cannot be selected together.
* Lead wire length
*5 : Refer to pages 750 and 751 for combinations
SRG3 of variations/options. Blank 1 m (standard)
*6 : Switches are shipped with the product. Contact CKD if 3 3 m (option)
assembling before shipment is necessary.
SRM3 *7 : F type switch cannot be selected. 5 5 m (option) *7
E Switch quantity
SRT3 [Example of model No.] R 1 on rod side
SSD2-KL-32C-10-T0H-R-N H 1 on head side
MRL2 Model: Compact cylinder, rubber-air cushioned D 2
●
A Bore size : ø32 mm F Option
MRG2 ●
B Port thread : Rc thread Blank Rod end female thread
●
C Stroke length : 10 mm N Rod end male thread
SM‑25 ●D Switch model No. : ‌Reed switch T0H, lead M Piston rod material (stainless steel)
wire length 1 m
Mounting bracket
ShkAbs ●
G
E Switch quantity : 1 on rod side G Mounting
●
F Option : Rod end male thread bracket
Blank Without mounting bracket
LB Axial foot
*2
FJ CB Clevis bracket (pin and snap ring included)
*3
FA Rod side flange
FK FB Head side flange
How to order switch
Spd H Accessory (available when rod end male thread “N” is selected)
Contr SW T0H H Accessory
I Rod eye
*4
Y Rod clevis (pin and snap ring included)
Ending
(Item D above)
834
 SSD2-K-*C Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 CMK2
5 ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 5 10 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch is not
available. SSG
Refer to page 832 for the number of installed switches and the min. stroke length.
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard stroke
length. SSD
*3 : Refer to page 789 for the min. stroke length with mounting bracket LB.
CAT
How to order mounting bracket
MDC2
Bore size (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80
Mounting bracket MVC
Foot (LB) SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80
Flange (FA/FB) SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SMG
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80
MSD/
Bore size (mm) MSDG
ø100
Mounting bracket
Foot (LB) SSD2-LB-100 FC*
Flange (FA/FB) SSD2-FA-100
Clevis bracket (CB) SSD2-CB-100
STK
*1: The foot mounting bracket is provided as 2 pcs./set.
SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

835
 SSD2-K-*C Series
SCP*3
Internal structure and parts list
● SSD2-KL-20C, 25C ● SSD2-KL-32C to 100C
CMK2 (double acting/single rod high load/rubber-air cushioned/with switch) (double acting/single rod high load/rubber-air cushioned/with switch)

CMA2 1 2 3 4 6 5 11 1 2 3 4 6 5 11

SCM

SCG

SCA2

SCS2

CKV2
CAV2/ 12 14 7 8 9 10 13 15
COVP/N2 12 14 7 8 9 10 13 15

SSD2 ● SSD2-K-20C, 25C ● SSD2-K-32C to 100C

(double acting/single rod high load/rubber-air cushioned) (double acting/single rod high load/rubber-air cushioned)

SSG
1 2 3 4 6 5 11 1 2 3 4 6 5 11 7

SSD

CAT

MDC2

MVC

SMG
MSD/ Over 50 st
MSDG 12 14 9 10 13 15
12 14 9 10 13 15
FC*
No. Part name Material Remarks No. Part name Material Remarks
STK
ø20 to ø25: Stainless steel Industrial chrome 8 Magnet Plastic
1 Piston rod
ø32 to ø100: steel plating 9 Piston Aluminum alloy Chromate
SRL3
2 C snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber
ø20 to ø50: Special aluminum ø20 to ø50: Alumite ø20 to ø25: Stainless steel
SRG3 3 Rod metal
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate
11 Cover
ø32 to ø100: Aluminum alloy
ø32 to ø100: Alumite

4 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet

SRM3
5 Body Aluminum alloy Hard alumite 13 Wear ring Polyacetal resin
6 Rod packing Nitrile rubber 14 Rubber air cushion (R) Special rubber
SRT3
7 Spacer Aluminum alloy Chromate 15 Rubber air cushion (H) Special rubber

MRL2
Repair parts list
MRG2 Bore size (mm) Kit No. Repair parts No.
ø20 SSD2-K-20CK
SM‑25 ø25 SSD2-K-25CK
ø32 SSD2-K-32CK
ShkAbs ø40 SSD2-K-40CK
4 6 10 13 14 15
ø50 SSD2-K-50CK
FJ ø63 SSD2-K-63CK
ø80 SSD2-K-80CK
FK ø100 SSD2-K-100CK

Spd
Contr Dimensions
Ending Same as SSD2-K Series (double acting/high load). Refer to pages 782 to 790.
836
 SSD2-K-*C Series
Technical data
Technical data SCP*3
[Comparison of collision noise level]
Standard rubber cushion :
CMK2
Rubber-air cushion :
CMA2
Values are comparison samples obtained under the conditions below.
As the values vary with base rigidity, etc., they are not guaranteed. SCM

ø20 ø25
SCG
80 80
(Test conditions)
Collision noise level dB(A)

Collision noise level dB(A)

SCA2
Cylinder : SSD2 70 70
Mounting direction
of cylinder : Vertical with rod upward SCS2
Cylinder supply pressure : 0.5 MPa 60 60
Measurement position CKV2
of sound level meter : 1 m from sample 50 50
CAV2/
COVP/N2
40 40
0.00 0.05 0.10 0.15 0.00 0.05 0.10 0.15 0.20 0.25
SSD2
Kinetic energy J Kinetic energy J

SSG

SSD
ø32 ø40 ø50
90 90 90 CAT

MDC2
Collision noise level dB(A)

Collision noise level dB(A)

Collision noise level dB(A)

80 80 80

MVC
70 70 70

SMG
60 60 60
MSD/
MSDG
50 50 50
FC*
40 40 40
0 0.1 0.2 0.3 0.4 0.5 0 0.2 0.4 0.6 0.8 1.0 0 0.2 0.4 0.6 0.8 1.0 STK
Kinetic energy J Kinetic energy J Kinetic energy J
SRL3

SRG3
ø63 ø80 ø100
SRM3
90 90 90

SRT3
80 80 80
Collision noise level dB(A)

Collision noise level dB(A)

Collision noise level dB(A)

MRL2
70 70 70
MRG2
60 60 60
SM‑25

50 50 50 ShkAbs

40 40 40 FJ
0 0.5 1 1.5 2 0 1 2 3 0 1 2 3 4 5

Kinetic energy J Kinetic energy J Kinetic energy J FK

Spd
Contr

Ending

837
 SSD2-K-*C Series
SCP*3
Technical data
[Comparison of collision acceleration] Standard rubber cushion :
CMK2 Rubber-air cushion :

CMA2
ø20 ø25 ø32
100 100 40
SCM
Collision acceleration G

Collision acceleration G
80 80
SCG
30

Collision acceleration G
60 60
When V = 400 mm/s When V = 400 mm/s
When V = 400 mm/s
SCA2
40 40

SCS2 20 20 20
When V = 200 mm/s When V = 200 mm/s
0 0
CKV2 0.00 0.05 0.10 0.15 0.00 0.05 0.10 0.15 0.20 0.25
10
When V = 200 mm/s
CAV2/ Kinetic energy J Kinetic energy J
COVP/N2

SSD2 0
0 0.1 0.2 0.3 0.4 0.5

SSG Kinetic energy J

SSD

CAT
ø40 ø50
MDC2 ø63
40 40
40
MVC When V = 400 mm/s
When V = 400 mm/s
30 30
Collision acceleration G

Collision acceleration G
Collision acceleration G

SMG 30

MSD/
MSDG 20 20
20
When V = 300 mm/s
FC*
When V = 200 mm/s When V = 200 mm/s
10 10 10
STK
When V = 200 mm/s
SRL3
0 0 0
0 0.2 0.4 0.6 0.8 1.0 0 0.2 0.4 0.6 0.8 1.0 0 0.5 1 1.5 2
SRG3
Kinetic energy J Kinetic energy J Kinetic energy J

SRM3

SRT3

MRL2 ø80 ø100

40 40
MRG2

SM‑25 30 30
Collision acceleration G

Collision acceleration G

ShkAbs
20 20
When V = 300 mm/s
FJ
When V = 300 mm/s

FK 10 10
When V = 200 mm/s
Spd
When V = 200 mm/s
Contr
0 0
0 1 2 3 0 1 2 3 4 5
Ending
Kinetic energy J Kinetic energy J

838
 SSD2-K-*C Series
[Allowable energy value] SCP*3

60 250 CMK2
ø50
ø100 CMA2
50
200

40 SCM

Load kg
Load kg

ø40 150
ø80
SCG
30

100
ø32
ø63 SCA2
20

50
SCS2
10

CKV2
0 0
0 100 200 300 400 500 0 100 200 300 400 500 CAV2/
COVP/N2
Piston speed mm/s Piston speed mm/s
SSD2
15
SSG
ø25
12
SSD
Load kg

9
ø20 CAT

6
MDC2

3 MVC

0 SMG
0 100 200 300 400 500
MSD/
Piston speed mm/s
MSDG

FC*
Usable in the range below and to the left of the curve.
Although it can also be used in the range marked with in the figure, we recommend use within the range marked with STK
a solid line to maximize the noise reduction effect.
SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

839
 Compact cylinder double acting/with position locking

SSD2-Q Series
SCP*3 ● Bore size: ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-Q
Item
SSD2-QL (with switch)
SCA2 Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting/position locking
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.5
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion Rubber cushion
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Position locking mechanism Rod side or head side
CAT Holding force N Max. thrust x 0.7
Allowable absorbed energy J 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92
MDC2
Stroke length
MVC
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø20
SMG
ø25
MSD/ ø32
MSDG 10/15/20/25/50/75/100 10
ø40
100
FC* ø50
ø63
STK ø80
25/50/75/100 25
ø100
SRL3
Be sure to read the Safety precautions for the position locking on pages 1058 to 1063 before use.
SRG3
Theoretical thrust table (Unit: N)
SRM3 Bore size Operating Working pressure MPa
(mm) direction 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
SRT3
Push 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20
Pull 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
MRL2
Push 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
MRG2 Pull 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push 1.21×10 2
1.61×10 2
2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
SM‑25 Pull 90.5 1.21×10 2
1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push 1.88×10 2
2.51×10 2
3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40
ShkAbs Pull 1.58×10 2
2.11×10 2
3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50
FJ Pull 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
FK ø63
Pull 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Spd Push 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103
ø80
Contr Pull 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
Ending ø100
Pull 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

840
 SSD2-Q Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV
F2S F3S F2H/F2V F3H/F3V F3YH/F3YV
F2YV (made to order)
Dedicated for For programmable Dedicated for For programmable
CMA2
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green
LED Yellow LED Yellow LED SCA2
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) (Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less SCS2
Weight g 1 m:10 3 m:29
CKV2
Switch specifications (T switch)
● 1-color/2-color display/for AC magnetic field proof CAV2/
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire COVP/N2
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V SSD2
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable SSG
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
SSD
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
CAT
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without LED MDC2
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON)
MVC
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
SMG
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
MSD/
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
MSDG
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. FC*
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. STK
*5 : The F type switch uses a bend-resistant lead wire.
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) SRL3
● With rod side position locking (Unit: g)
Stroke length (mm) 10 15 20 25 50 75 100 SRG3
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø20 201 242 213 254 226 267 238 279 330 370 392 433 455 495 SRM3
ø25 274 315 290 331 306 347 322 363 439 480 519 560 599 640
ø32 430 474 451 495 473 517 494 538 602 646 709 753 817 861 SRT3
ø40 632 681 658 708 685 734 711 761 844 893 976 1026 1109 1158
ø50 1096 1147 1138 1189 1180 1231 1222 1273 1432 1483 1642 1693 1852 1903 MRL2
ø63 1609 1663 1664 1718 1719 1773 1774 1828 2049 2103 2324 2378 2599 2653
ø80 - - - - - - 3822 3882 4255 4315 4904 4964 5336 5396 MRG2
ø100 - - - - - - 5769 5835 6339 6405 7194 7260 7764 7830
● With head side position locking (Unit: g) SM‑25
Stroke length (mm) 10 15 20 25 50 75 100
ShkAbs
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø20 217 258 230 270 242 283 255 295 330 370 392 433 455 495
FJ
ø25 295 336 311 352 327 368 343 384 439 480 519 560 599 640
ø32 462 506 484 528 505 549 527 571 634 678 742 786 849 893
FK
ø40 688 737 714 763 741 790 767 816 900 949 1032 1081 1165 1214
ø50 1180 1231 1222 1273 1264 1315 1306 1357 1516 1567 1726 1777 1936 1987 Spd
ø63 1675 1729 1730 1784 1785 1839 1840 1894 2115 2169 2390 2444 2665 2719 Contr
ø80 - - - - - - 3952 4012 4385 4445 4904 4964 5336 5396
ø100 - - - - - - 5940 6006 6510 6576 7194 7260 7764 7830
Ending

841
 SSD2-Q Series
SCP*3
How to order Code Description
● Without switch (without magnet for switch) A Bore size (mm)
20 ø20
CMK2 SSD2-Q 20 10 R NMO LB I 25 ø25
● With switch (built-in magnet for switch) 32 ø32
CMA2 40 ø40
SSD2-QL 20 10 R T0H R NMO LB I 50 ø50
63 ø63
SCM 80 ø80
100 ø100
SCG A Bore size
B Port thread
B Port thread Blank Rc thread
SCA2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)

SCS2 C Stroke length (mm)

C Stroke length
Refer to the stroke length table on the following page.
CKV2
D Position locking mechanism
CAV2/ D Position locking mechanism R With rod side position locking
COVP/N2 H With head side position locking

SSD2 E Switch model No.

E Switch model No. Lead wireLead wire Voltage Bore size

Contact
Lead
*1 Display
Straight L-shaped AC DC wire 20 25 32 40 50 63 80 100
SSG *6 - F2S* ● 2-wire ● ●
- F3S* ● 3-wire ● ●
1-color display
Proximity
SSD F2H* F2V* ● 2-wire ● ●
F3H* F3V* ● 3-wire ● ●
F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
CAT F2YH* F2YV* ● 2-wire ● ●
2-color display
G Option F3YH* F3YV* ● 3-wire ● ●
MDC2 *2 T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

T8H* T8V* ● ● 1-color display ● ● ● ● ● ● ● ●
MVC Precautions for model No. selection T1H* T1V* ● ● ● ● ● ● ● ● ●
2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
*1 : The F switch can only be mounted on the piping port ● ● ● ● ● ● ● ● ●
SMG surface of bore sizes ø20 and ø25.
T3H* T3V*
3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
*2 : Only non-locking manual override unless “M0” or “M1”
Proximity

MSD/ T2WH* T2WV* ● ● ● ● ● ● ● ● ●

of ●
G option is selected. A release bolt is not included. 2-wire
MSDG T2YH* T2YV* ● ● ● ● ● ● ● ● ●
*3 : The mounting bracket is included at shipment. 2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ●
*4 : The projection dimension of piston rod WF when LB 3-wire
FC* or FA is selected is different from that of the
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
standard. Refer to the dimensions on pages 847, 2-wire
T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
STK 848, 850 and 851. The number of the specified
protruding dimension will be added at the end of the T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
model No. printed on the metal plate on the body. * Lead wire length
SRL3 *5 : ”I” and “Y” cannot be selected together. Blank 1 m (standard)
*6 : Switches are shipped with the product. Contact CKD if 3 3 m (option)
assembling before shipment is necessary. 5 5 m (option) *8
SRG3 *7 : Refer to pages 750 and 751 for combinations of
variations/options. F Switch quantity
SRM3 *8 : F type switch cannot be selected. R 1 on rod side
H 1 on head side
[Example of model No.] D 2
SRT3
SSD2-QL-20-10-R-T0H-R-N-LB-I G Option
Blank Rod end female thread
MRL2 Model: Compact cylinder, position locking N Rod end male thread
●
A Bore size : ø20 mm M0 Non-locking manual override (with release bolt)
MRG2 ●
B Port thread : Rc thread M1 Locking manual override
●
C Stroke length : 10mm P4
Specifications for rechargeable battery (made to order)
SM‑25 ● Position locking mechanism : With rod side position locking
D P40
●
E Switch model No. : Reed switch T0H, lead wire 1 m H Mounting bracket
●
F Switch quantity : 1 on rod side H Mounting Blank Without mounting bracket
ShkAbs ●
G Option : Rod end male thread bracket LB Axial foot
●
H Mounting bracket : Axial foot *3 CB Clevis bracket (pin and snap ring included)
FJ ●
I Accessory : Rod eye *4 FA Rod side flange
FB Head side flange

FK I Accessory (available when rod end male thread “N” is selected)

How to order switch I Accessory I Rod eye
Spd *5 Y Rod clevis (pin and snap ring included)
Contr SW T0H
Ending
Switch model No. (Item E above)
842
 SSD2-Q Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 CMK2
10 ● ● ● ● ● ●
Standard stroke length

15 ● ● ● ● ● ● CMA2
20 ● ● ● ● ● ●
25 ● ● ● ● ● ● ● ● SCM
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ● ● ● SCG
100 ● ● ● ● ● ● ● ●
Min. stroke length (mm) 10 25
SCA2
Max. stroke length (mm) 100
SCS2

CKV2
CAV2/
How to order mounting bracket COVP/N2
Bore size (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 SSD2
Mounting bracket
Foot (LB) SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80
SSG
Flange (FA/FB) SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD
Bore size (mm)
ø100
Mounting bracket CAT
Foot (LB) SSD2-LB-100
Flange (FA/FB) SSD2-FA-100 MDC2
Clevis bracket (CB) SSD2-CB-100
*1: The foot mounting bracket is provided as 2 pcs./set. MVC

SMG
MSD/
MSDG
[Explanation of manual override]
● Non-locking manual override (option code: M0) ● Locking manual override (option code: M1) FC*
Travel distance 2.5 to 3 mm
Travel distance 3mm

STK
Hexagon socket head cap screw: M3 x 30
Round nut SRL3

Spring SRG3
Dimensions
23.5

Reference

Stopper piston
SRM3

SRT3

MRL2

MRG2

By screwing the hexagon socket head cap screw By rotating the round nut leftward SM‑25
(M3 x 30) into the stopper piston and pulling the (counterclockwise), the stopper piston moves and
bolt with force of 20 N or more, the stopper piston the lock is released. Locking the round nut by
moves and the lock is released. (Perform when rotating it to the right (clockwise) causes the ShkAbs
horizontally installed with no load or when the stopper piston to return. When it fits into the lock
opposite side port is pressurized) groove, the piston is locked. Screw in the round FJ
When you release the bolt, the stopper piston is nut fully, since the cylinder may be damaged if the
returned to the original position and engaged in stopper piston is not securely locked in the groove.
the groove, and the piston is locked. FK
Spd
Contr

Ending

843
 SSD2-Q Series
SCP*3
Internal structure and parts list (ø20 to ø50)
● ‌SSD2-QL-20 to 50-R ● ‌SSD2-QL-20 to 50-H
CMK2 (double acting/single rod/with switch/rod side position locking) (double acting/single rod/with switch/head side position locking)
15 17 16 21 22 20 23 19 25 18 1 2 3 4 5 7 8 9 10 11 15 17 22 20 21 16 23 19

CMA2

SCM

SCG

SCA2

SCS2 1 2 3 4 6 7 8 10 9 11 13 27 25 12 26 13 14 18

CKV2 ● ‌SSD2-Q-20 to 50-R

(double acting/single rod/rod side position locking)
● ‌SSD2-Q-20 to 50-H
(double acting/single rod/head side position locking)
CAV2/ 15 17 16 21 22 20 23 19 25 18 1 2 3 4 5 7 8 10 11 15 17 22 20 21 16 23 19
COVP/N2

SSD2

SSG

SSD

CAT
1 2 3 4 6 7 8 10 11 13 27 25 12 26 13 14 18
MDC2
● ø20, ø25: 50 stroke length and over ● ø20, ø25: 50 stroke length and over ● Locking manual override
MVC 24 24 29 28

SMG
MSD/
MSDG

FC*

STK

SRL3 Parts list

No. Part name Material Remarks No. Part name Material Remarks
ø20 to ø25: Stainless steel Industrial chrome
SRG3 1 Piston rod
ø32 to ø50: Steel plating
16 Stopper piston Steel Nitriding

2 C snap ring Steel Zinc phosphate 17 Stopper packing Nitrile rubber

SRM3 3 Rod packing Nitrile rubber 18 O-ring Nitrile rubber
4 Rod metal gasket Nitrile rubber ø20 to ø30, ø50: Aluminum alloy Alumite
19 Stopper housing
5 Rod metal Special aluminum Alumite ø40: Alloy steel Chromate
SRT3 6 Rod cover Aluminum alloy Alumite 20 Stopper cover Aluminum alloy Chromate
7 Cushion rubber (R) Urethane rubber 21 Cushion rubber Urethane rubber
MRL2 8 Spacer Aluminum alloy ø20 to ø32: Chromate 22 Coil spring Piano wire Electrodeposition
9 Magnet Plastic 23 Hexagon socket head cap screw Steel
Polyacetal resin (only for ø20 and ø25
MRG2 10 Piston packing Nitrile rubber 24 Wear ring
with 50 mm stroke length and over)
11 Piston Aluminum alloy Chromate 25 Cushion rubber (H) Urethane rubber
SM‑25 12 Spring pin Steel Black finish 26 Sleeve Steel Nitriding
13 Body Aluminum alloy Hard alumite 27 Cover Aluminum alloy Chromate
14 Head cover Aluminum alloy Chromate 28 Round nut Aluminum alloy
ShkAbs 15 O-ring Nitrile rubber 29 Hexagon socket head cap screw Steel

FJ Repair parts list

Bore size (mm) Kit No. Repair parts No.
FK ø20 SSD2-Q-20K
ø25 SSD2-Q-25K
Spd ø32 SSD2-Q-32K
3 4 7 10 15

Contr ø40 SSD2-Q-40K

17 18 21 24 25

ø50 SSD2-Q-50K
Ending *1: ●
24 is included only with ø20 and ø25.

844
 SSD2-Q Series
Internal structure and parts list
Internal structure and parts list (ø63 to ø100) SCP*3
● ‌SSD2-QL-63 to 100-R ● ‌SSD2-QL-63 to 100-H
(double acting/single rod/with switch/rod side position locking) (double acting/single rod/with switch/head side position locking) CMK2
18 16 17 22 23 21 24 20 19 26 1 3 2 5 4 8 16 18 22 23 21 17 24 20

CMA2

SCM

SCG

SCA2

SCS2
1 3 2 4 6 7 8 9 10 11 12 14 28 7 9 10 11 12 26 27 14 19 15
CKV2
● ‌SSD2-Q-63 to 100-R ● ‌SSD2-Q-63 to 100-H
(double acting/single rod/rod side position locking) (double acting/single rod/head side position locking)
CAV2/
18 16 17 22 23 21 24 20 19 26 1 3 2 5 4 8 16 18 22 23 21 17 24 20 COVP/N2

SSD2

SSG

SSD

CAT

MDC2
1 3 2 4 6 7 8 9 11 12 14 28 7 9 12 11 26 27 14 15 19

● ø80, ø100: 75 stroke length and over ● ø80, ø100: 75 stroke length and over ● Locking manual override MVC
25 25
SMG
29 30
MSD/
MSDG

FC*

STK

Parts list SRL3

No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod Steel Industrial chrome plating 17 Stopper piston Steel Nitriding SRG3
2 C snap ring Steel Zinc phosphate 18 Stopper packing Nitrile rubber
3 Rod packing Nitrile rubber 19 O-ring Nitrile rubber SRM3
4 Rod metal gasket Nitrile rubber ø80: Aluminum alloy Alumite
20 Stopper housing
5 Rod metal Special aluminum Alumite ø63, ø100: Alloy steel Chromate
6 Rod cover Aluminum alloy Alumite 21 Stopper cover Aluminum alloy Chromate
SRT3
7 Bush Oiles drymet 22 Cushion rubber Urethane rubber
8 Cushion rubber (R) Urethane rubber 23 Coil spring Piano wire Electrodeposition MRL2
9 Spacer Aluminum alloy 24 Hexagon socket head cap screw Steel

10 Magnet Plastic 25 Wear ring

Polyacetal resin (only for ø80 and ø100 MRG2
with 75 mm stroke length and over)
11 Piston packing Nitrile rubber 26 Cushion rubber (H) Urethane rubber
SM‑25
12 Piston Aluminum alloy Chromate 27 Sleeve Steel Nitriding
13 Spring pin Steel Black finish 28 Cover Aluminum alloy Chromate
14 Body Aluminum alloy Hard alumite 29 Round nut Aluminum alloy
ShkAbs
15 Head cover Aluminum alloy Chromate 30 Hexagon socket head cap screw Steel
16 O-ring Nitrile rubber FJ

Repair parts list FK

Bore size (mm) Kit No. Repair parts No.
Spd
ø63 SSD2-Q-63K 3 4 8 11 16 Contr
ø80 SSD2-Q-80K
18 19 22 25 26
ø100 SSD2-Q-100K
Ending
*1: ●
25 is included only with ø80 and ø100.

845
 SSD2-Q Series
SCP*3
Dimensions (ø20, ø25)
● SSD2-Q(L)-20 to 25-R ● Rod end male thread
CMK2 * The dimensions are common for types with and without switches.
A + stroke length a’ wf
c’
CMA2 F WF B + stroke length
T
N 23
SCM

øMM
R
21
C ø10.5 D
8-J
SCG Mounting hole KK

kk’
Q

SCA2 Width across

flats M

øMM
SCS2 Width across flats H
F

CKV2 2-EE

CAV2/

øI
COVP/N2 øK M 8-KA

SSD2 ● SSD2-Q(L)-20 to 25-H

* The dimensions are common for types with and without switches.
SSG
A + stroke length
F
WF B + stroke length
SSD N
21 23
R
CAT
C ø10.5 D
8-J
Mounting hole

QC(MAX)
MDC2
Q

KK
MVC
F

SMG
øMM

MSD/ 2-EE
MSDG

FC* øK
øI

8-KA
M

STK
● Precautions regarding the switch mounting groove
*1: Only F switch is available for the ø20 or ø25 piping port surface.
SRL3
Code Common dimensions

SRG3 Bore size (mm) EE F I J K KA KK M MM N WF *1 Q QC

ø20 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5(14.5) 28.5 40
ø25 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5(15) 29.5 41
SRM3
Code With rod side position locking mechanism With head side position locking mechanism
SRT3 Bore size (mm) A *1 B *1 C D R A *1 B *1 C D R
ø20 59(80.5) 54.5(66) 9.5 8 18.6 65.5(80.5) 61(66) 9.5 8 17.3

MRL2 ø25 62.5(84) 57.5(69) 12 8.5 19.3 69(84) 64(69) 12 8.5 18.4

MRG2 ● Rod end male thread

Code
a’ c’ H kk’ M MM T wf *1
SM‑25 Bore size (mm)
ø20 14 12 13 M8 8 10 5 4.5(14.5)
ShkAbs ø25 17.5 15 17 M10×1.25 10 12 6 5(15)
*1 : Dimensions in ( ) are for stroke lengths of more than 25 mm.
FJ *2 : Refer to pages 852 and 853 for switch mounting position.
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.

FK
Spd
Contr

Ending

846
 SSD2-Q Series
Dimensions
Dimensions with mounting bracket SCP*3
● Axial foot (LB)
SSD2-Q(L)-20, 25 -LB CMK2

A + stroke length A + stroke length

CMA2
WF B + stroke length M a’ wf B + stroke length
N
Rod end male thread
SCM

SCG
N
AG

AT
AH
Low head hexagon
AU socket bolt 8-G LF SCA2
TR
4-øAB AK
TS
LF LX + stroke length SCS2

CKV2
Code Common dimensions Female thread SSD2-Q-R (female thread)
Bore size Without/with switch CAV2/
AB AG AH AK AT AU G N TR TS M WF LF COVP/N2
(mm) A B LX
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 14.5 20.5 76.2(87.7) 54.5(66) 42.5(54) SSD2
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 15 22.5 79.7(91.2) 57.5(69) 42.5(54)
Code SSD2-Q-R (male thread) SSD2-Q-H (female thread) SSG
Bore size Without/with switch Without/with switch
a’ wf LF WF LF
(mm) A B LX A B LX SSD
ø20 14 14.5 20.5 90.2(101.7) 54.5(66) 42.5(54) 14.5 20.5 82.7(87.7) 61(66) 49(54)
ø25 17.5 15 22.5 97.2(108.7) 57.5(69) 42.5(54) 15 22.5 86.2(91.2) 64(69) 49(54) CAT
Code SSD2-Q-H (male thread)
Bore size Without/with switch MDC2
a’ wf LF
(mm) A B LX
ø20 14 14.5 20.5 96.7(101.7) 61(66) 49(54) MVC
ø25 17.5 15 22.5 103.7(108.7) 64(69) 49(54)
* Dimensions in ( ) are for ø20 and ø25 with more than 25 mm stroke length and ø80 and ø100 with more than 50 mm stroke length. SMG
MSD/
● Clevis bracket (CB) MSDG
SSD2-Q(L)-20, 25 -CB
FC*
A + stroke length UB
WF B + stroke length D CB
A + stroke length STK
CC H a’ wf B + stroke length
Rod end male thread
SRL3
øCA

SRG3
E
N
CD

CJ + stroke length SRM3

H1

N
0

CJ + stroke length
Mounting bolt 4-G E
SRT3

Code Common dimensions SSD2-Q-R (female thread)

MRL2
Bore size
CA CB CC CD D E G H N UB WF A B CJ
(mm)
MRG2
ø20 20  8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
-0.3 4.5(14.5) 86(107.5) 54.5(66) 77(98.5)
ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28 20 -0.1 5(15) 92.5(114) 57.5(69) 82.5(104)
-0.3
SM‑25
Code SSD2-Q-R (male thread) SSD2-Q-H (female thread)
Bore size
a’ wf A B CJ WF A B CJ ShkAbs
(mm)
ø20 14 4.5(14.5) 100(121.5) 54.5(66) 77(98.5) 4.5(14.5) 92.5(107.5) 61(66) 83.5(98.5) FJ
ø25 17.5 5(15) 110(131.5) 57.5(69) 82.5(104) 5(15) 99(114) 64(69) 89(104)
Code SSD2-Q-H (male thread) FK
Bore size
a’ wf A B CJ Spd
(mm)
Contr
ø20 14 4.5(14.5) 106.5(121.5) 61(66) 83.5(98.5)
ø25 17.5 5(15) 116.5(131.5) 64(69) 89(104)
Ending
*1: Dimensions in ( ) are for more than 25 mm stroke length.

847
 SSD2-Q Series
SCP*3
Dimensions with mounting bracket
● Rod side flange (FA)
CMK2 SSD2-Q(L)-20, 25 -FA

CMA2
FM A + stroke length Rod end male thread A + stroke length
FL WF B + stroke length a’ wf B + stroke length
SCM FT FT
N
2-FD
SCG
FH
N

SCA2

SCS2 Mounting bolt 4-G

Hexagon socket button head bolt

CKV2
Code Common dimensions SSD2-Q-R (female thread) SSD2-Q-R (male thread)
CAV2/
COVP/N2 Bore size Without/with switch Without/with switch
FD FH FL FM FT N G WF a’ wf
(mm) A B A B
SSD2 ø20 6.6 39 48 60 8 25.5 M6×16 14.5 69(80.5) 54.5(66) 14 14.5 83(94.5) 54.5(66)
ø25 6.6 42 52 64 8 28 M6×16 15 72.5(84) 57.5(69) 17.5 15 90(101.5) 57.5(69)
SSG Code SSD2-Q-H (female thread) SSD2-Q-H (male thread)
Bore size Without/with switch Without/with switch
SSD WF a’ wf
(mm) A B A B
ø20 14.5 75.5(80.5) 61(66) 14 14.5 89.5(94.5) 61(66)
CAT ø25 15 79(84) 64(69) 17.5 15 96.5(101.5) 64(69)
* Dimensions in ( ) are for ø20 and ø25 with more than 25 mm stroke length and ø80 and ø100 with more than 50 mm stroke length.
MDC2

MVC

SMG
● Head side flange (FB)
MSD/
SSD2-Q(L)-20, 25 -FB
MSDG

FC*
FM
A + stroke length FL A + stroke length
STK
WF B + stroke length FT N Rod end male thread a’ wf B + stroke length FT

SRL3 2-FD
FH

SRG3
N

SRM3
Mounting bolt 4-G
Hexagon socket button head bolt
SRT3

MRL2 Code Common dimensions SSD2-Q-R (female thread) SSD2-Q-R (male thread)
Bore size
MRG2 FD FH FL FM FT N G WF A B a’ wf A B
(mm)
ø20 6.6 39 48 60 8 25.5 M6×16 4.5(14.5) 67(88.5) 54.5(66) 46 19.5(14.5) 71(92.5) 54.5(66)
SM‑25 ø25 6.6 42 52 64 8 28 M6×16 5(15) 70.5(92) 57.5(69) 53 22.5(15) 88(109.5) 57.5(69)
Code SSD2-Q-H (female thread) SSD2-Q-H (male thread)
ShkAbs
Bore size
WF A B a’ wf A B
(mm)
FJ ø20 4.5(14.5) 73.5(88.5) 61(66) 46 19.5(14.5) 77.5(92.5) 61(66)
ø25 5(15) 77(92) 64(69) 53 22.5(15) 94.5(109.5) 64(69)
FK *1: Dimensions in ( ) are for more than 25 mm stroke length.

Spd
Contr

Ending

848
 SSD2-Q Series
Dimensions
Dimensions (ø32 to ø100) SCP*3
● SSD2-Q(L)-32 to 100-R ● Rod end male thread
* The dimensions are common for types with and without switches. a’ wf CMK2
A + stroke length c’
WF B + stroke length T
F CMA2
S

øMM
N
8-J R D
P øQD SCM
Mounting hole C
KK

SCG
QB

kk’
Width across
SCA2

øMM
flats M
F

Width across flats H

2-EE SCS2

M O CKV2

øI
øK

G 8-KA
CAV2/
● SSD2-Q(L)-32 to 100-H
COVP/N2
* The dimensions are common for types with and without switches.
A + stroke length
F WF B + stroke length
SSD2
N S
8-J
P
Mounting hole
R øQE SSG
C øQD
D
KK SSD
QB

QC(MAX)
CAT
F

øMM

MDC2
2-EE

M O MVC
øK

G 8-KA
øI

Code Common dimensions SMG

Bore size (mm) EE F G I J K KA KK M MM N
MSD/
ø32 Rc1/8 45 49.5 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34
MSDG
ø40 Rc1/8 52 57 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40
ø50 Rc1/4 64 71 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50
FC*
ø63 Rc1/4 77 84 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15 17 20 60
ø80 Rc3/8 98 104 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21 22 25 77
ø100 Rc3/8 117 123.5 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27 27 30 94 STK
Code Common dimensions
Bore size (mm) O P S QB QC QD QE WF *1 SRL3
ø32 4.5 22 30.5 33.5 46.3 10.5 13 7
ø40 5 22 30.5 37 49.8 10.5 13 7
ø50 7 40.5 23 44 56.3 10.5 13 8
SRG3
ø63 7 40.5 23 50.5 62.8 10.5 13 8
ø80 6 47 47 62 77.5 14.5 24 10(20) SRM3
ø100 6.5 47 47 71.5 87 14.5 24 12(22)
Code With rod side position locking mechanism With head side position locking mechanism SRT3
Bore size (mm) A *1 B *1 C D R A *1 B *1 C D R
ø32 65 58 11 9 19.2 72.5 65.5 11 9 20.9
ø40 71.5 64.5 14 11 21.7 82 75 14 14 23.9 MRL2
ø50 73.5 65.5 15 12.5 24.7 83.5 75.5 15 12.5 29.8
ø63 79 71 19 16 26.2 85 77 15 16 25.5 MRG2
ø80 113.5(136) 103.5(116) 18 17 40 121(136) 111(116) 18 17 37.5
ø100 125(147.5) 113(125.5) 23 21 44.5 132.5(147.5) 120.5(125.5) 23 21 40
SM‑25
● Rod end male thread
ShkAbs
Code
a’ c’ H kk’ M MM T wf *1
Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5 FJ
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5 FK
ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8(18) Spd
ø100 35.5 32.5 41 M26×1.5 27 30 16 8(18) Contr
*1 : Dimensions in ( ) are for stroke lengths of more than 50 mm.
*2 : Refer to pages 852 and 853 for switch mounting position. Ending
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
849
 SSD2-Q Series
SCP*3
Dimensions with mounting bracket
● Axial foot (LB)
CMK2 SSD2-Q(L)-32 to 100 -LB
A + stroke length
A + stroke length Rod end male thread
CMA2 a’ wf B + stroke length
WF B + stroke length M

SCM

SCG
AG

AH
AT

SCA2
AD
AE

AU LF
N Low head hexagon socket bolt 4-G
4-øAB AK
SCS2 TR
TS LF LX + stroke length

CKV2
Code Common dimensions Female thread SSD2-Q-R (female thread)
CAV2/ Bore size Without/with switch
AB AD AE AG AH AK AT AU G N TR TS M WF LF
COVP/N2 (mm) A B LX
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 17 25 82.2 58 42
SSD2 ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 17 25 88.7 64.5 48.5
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 18 29.5 91.7 65.5 42.5
SSG ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 18 31 98.2 71 45
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 20 35 135(147.5) 103.5(116) 73.5(86)
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 22 39 148(160.5) 113(125.5) 79(91.5)
SSD
Code SSD2-Q-R (male thread) SSD2-Q-H (female thread) SSD2-Q-H (male thread)
Bore size Without/with switch Without/with switch Without/with switch
CAT a’ wf LF WF LF a’ wf LF
(mm) A B LX A B LX A B LX
ø32 23.5 15 23 103.7 58 42 17 25 89.7 65.5 49.5 23.5 15 23 111.2 65.5 49.5
MDC2 ø40 23.5 15 23 110.2 64.5 48.5 17 25 99.2 75 59 23.5 15 23 120.7 75 59
ø50 28.5 15 26.5 117.2 65.5 42.5 18 29.5 101.7 75.5 52.5 28.5 15 26.5 127.2 75.5 52.5
ø63 28.5 15 28 123.7 71 45 18 31 104.2 77 51 28.5 15 28 129.7 77 51
MVC
ø80 35.5 18 33 168.5(181) 103.5(116) 73.5(86) 20 35 142.5(147.5) 111(116) 81(86) 35.5 18 33 176(181) 111(116) 81(86)
ø100 35.5 18 35 179.5(192) 113(125.5) 79(91.5) 22 39 155.5(160.5) 120.5(125.5) 86.5(91.5) 35.5 18 35 187(192) 120.5(125.5) 86.5(91.5)
SMG * Dimensions in ( ) are for ø20 and ø25 with more than 25 mm stroke length and ø80 and ø100 with more than 50 mm stroke length.

MSD/ ● Clevis bracket (CB)

MSDG SSD2-Q(L)-32 to 100 -CB Rod end male thread

FC* A + stroke length UB

A + stroke length
WF B + stroke length D CB +00.2
CC a’ wf B + stroke length
STK
MR
SRL3 R
E
N

SRG3
CD
H1
0

AC
SRM3 Mounting bolt 4-G N
CJ + stroke length
CJ + stroke length
E
SRT3
Code Common dimensions SSD2-Q-R (female thread)
MRL2 Bore size
AC CB CC CD D E G MR N UB WF A B CJ
(mm)
MRG2 ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36 7 95 58 85
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 103.5 64.5 93.5
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 115.5 65.5 101.5
SM‑25 ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 123 71 109
ø80 9 28.2 27 18 10 98 M12×40 18 77 56 10(20) 169.5(192) 103.5(116) 151.5(174)
ShkAbs ø100 12 32.2 31 22 13 117 M12×40 22 94 64 12(22) 192(214.5) 113(125.5) 170(192.5)
Code SSD2-Q-R (male thread) SSD2-Q-H (female thread) SSD2-Q-H (male thread)
FJ Bore size
a’ wf A B CJ WF A B CJ a’ wf A B CJ
(mm)
ø32 23.5 5 116.5 58 83 7 102.5 65.5 92.5 23.5 5 124 65.5 90.5
FK
ø40 23.5 5 125 64.5 91.5 7 114 75 104 23.5 5 135.5 74.5 102
Spd ø50 28.5 5 141 65.5 98.5 8 125.5 75.5 111.5 28.5 5 151 71.5 108.5
Contr ø63 28.5 5 148.5 71 106 8 129 77 115 28.5 5 154.5 77 112
ø80 35.5 8(18) 203(225.5) 103.5(116) 149.5(172) 10(20) 177(192) 111(116) 159(174) 35.5 8(18) 210.5(225.5) 111(116) 157(172)
ø100 35.5 8(18) 223.5(246) 113(125.5) 166(188.5) 12(22) 199.5(214.5) 120.5(125.5) 177.5(192.5) 35.5 8(18) 231(246) 120.5(125.5) 173.5(188.5)
Ending
*1: Dimensions in ( ) of ø80 and ø100 are for more than 50 mm stroke length.

850
 SSD2-Q Series
Dimensions
Dimensions with mounting bracket SCP*3
● Rod side flange (FA)
SSD2-Q(L)-32 to 100 -FA CMK2

A + stroke length A + stroke length CMA2

FM
FL WF B + stroke length Rod end male thread a’ wf B + stroke length
N 4-FD FT FT SCM

SCG
FC
FH

SCA2

Mounting bolt 4-G

SCS2
ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
CKV2
Code Common dimensions SSD2-Q-R (female thread) SSD2-Q-R (male thread)
Bore size Without/with switch Without/with switch CAV2/
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B COVP/N2
ø32 34 5.5 48 56 65 8 34 M6×16 17 75 58 23.5 15 96.5 58
ø40 40 5.5 54 62 72 8 40 M6×16 17 81.5 64.5 23.5 15 103 64.5 SSD2
ø50 50 6.6 67 76 89 9 50 M8×20 18 83.5 65.5 28.5 15 109 65.5
ø63 60 9 80 92 108 9 60 M10×25 18 89 71 28.5 15 114.5 71 SSG
ø80 77 11 99 116 134 11 77 M12×40 20 123.5(136) 103.5(116) 35.5 18 157(169.5) 103.5(116)
ø100 94 11 117 136 154 11 94 M12×40 22 135(147.5) 113(125.5) 35.5 18 166.5(179) 113(125.5)
SSD
Code SSD2-Q-H (female thread) SSD2-Q-H (male thread)
Bore size Without/with switch Without/with switch
WF a’ wf CAT
(mm) A B A B
ø32 17 82.5 65.5 23.5 15 104 65.5
ø40 17 92 75 23.5 15 113.5 75 MDC2
ø50 18 93.5 75.5 28.5 15 119 75.5
ø63 18 95 77 28.5 15 120.5 77
MVC
ø80 20 131(136) 111(116) 35.5 18 164.5(169.5) 111(116)
ø100 22 142.5(147.5) 120.5(125.5) 35.5 18 174(179) 120.5(125.5)
* Dimensions in ( ) are for ø20 and ø25 with more than 25 mm stroke length and ø80 and ø100 with more than 50 mm stroke length. SMG

● Head side flange (FB) MSD/

SSD2-Q(L)-32 to 100 -FB MSDG
Rod end male thread
FM FC*
A + stroke length FL A + stroke length
WF B + stroke length FT N 4-FD a’ wf B + stroke length FT
STK

SRL3
FC
FH

SRG3

Mounting bolt 4-G SRM3

ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
SRT3
Code Common dimensions SSD2-Q-R (female thread) SSD2-Q-R (male thread)
Bore size MRL2
FC FD FH FL FM FT N G WF A B a’ wf A B
(mm)
ø32 34 5.5 48 56 65 8 34 M6×16 7 73 58 59.5 23 94.5 58 MRG2
ø40 40 5.5 54 62 72 8 40 M6×16 7 79.5 64.5 66 29.5 101 64.5
ø50 50 6.6 67 76 89 9 50 M8×20 8 82.5 65.5 73 30.5 108 65.5
ø63 60 9 80 92 108 9 60 M10×25 8 88 71 78.5 36 113.5 71
SM‑25
ø80 77 11 99 116 134 11 77 M12×40 10(20) 124.5(147) 103.5(116) 98 43.5(18) 158(180.5) 103.5(116)
ø100 94 11 117 136 154 11 94 M12×40 12(22) 136(158.5) 113(125.5) 107.5 53(18) 167.5(190) 113(125.5) ShkAbs
Code SSD2-Q-H (female thread) SSD2-Q-H (male thread)
Bore size
WF A B a’ wf A B
FJ
(mm)
ø32 7 80.5 65.5 59.5 23 102 65.5
FK
ø40 7 90 75 66 29.5 111.5 74.5
ø50 8 92.5 75.5 73 30.5 118 71.5 Spd
ø63 8 94 77 78.5 36 119.5 77 Contr
ø80 10(20) 132(147) 111(116) 98 43.5(18) 165.5(180.5) 111(116)
ø100 12(22) 143.5(158.5) 120.5(125.5) 107.5 53(18) 175(190) 120.5(125.5)
Ending
*1: Dimensions in ( ) of ø80 and ø100 are for more than 50 mm stroke length.

851
 SSD2-Q Series
SCP*3
Dimensions (with the 1-color display, 2-color display, off-delay, strong magnetic field proof, T1* or T8* switch)
● SSD2-QL-20 to 25-R (with switch/rod side position locking)
CMK2

CMA2
FA
SCM

SCG
HD
SCA2
A
SCS2

FB
RD
CKV2
CAV2/
COVP/N2

SSD2

SSG ● SSD2-QL-32 to 100-R (with switch/rod side position locking)

SSD
FA

CAT

MDC2
HD
MVC
A
FB

SMG
RD
MSD/
MSDG

FC*

STK
Common F2H/F2V, F3H/F3V,
T0H/T0V, T5H/T5V T2H/T2V, T3H/T3V T2WH/T2WV, T3WH/T3WV F2S/F3S
SRL3 Code dimensions F2YH/F2YV, F3YH/F3YV
Bore size (mm) FA FB HD RD HD RD HD RD HD RD HD RD
SRG3 ø20 18.5 12.5 4 32 37 4 32 37 6 33.5 38.5 8.5 36 41 7.5 35 40
ø25 20.5 13.5 6.5 33.5 38.5 6.5 33.5 38.5 8.5 35 40 11 37.5 42.5 10 36.5 41.5
SRM3 ø32 23 20.5 5.5 34 5.5 34 7.5 36
ø40 26.5 27.5 8 38 8 38 10 39.5
SRT3 ø50 32.5 28.5 6.5 41 6.5 41 8.5 42.5
ø63 39 28.5 10.5 42 10.5 42 12.5 44
MRL2 ø80 49.5 28.5 19 24 66 73.5 19 24 66 73.5 21 26 68 75.5
ø100 59 28.5 24.5 29.5 70 77.5 24.5 29.5 70 77.5 26.5 31.5 72 79.5
MRG2 Code T2YH/T2YV, T3YH/T3YV, T2JH/T2JV T2YD, T2YDT, T1H/T1V T8H/T8V *1
Bore size (mm) FA FB HD RD FA FB HD RD FA FB HD RD
SM‑25 ø20 24.3 16 3 30 35 29.3 16 3 30 35 24.3 16 0 25.5 30.5
ø25 26.3 17 5.5 32 37 31.3 17 5.5 32 37 26.3 17 0.5 27 32
ShkAbs ø32 28.8 24 4 32.5 33.8 24 4 32.5 28.8 24 0 28
ø40 32.3 31 7 36.5 37.3 31 7 36.5 32.3 31 2 31.5
FJ ø50 38.3 32 5.5 39.5 43.3 32 5.5 39.5 38.3 32 0.5 34.5
ø63 44.8 32 9 40.5 49.8 32 9 40.5 44.8 32 4 35.5
FK ø80 55.3 32 17.5 22.5 64.5 72 60.3 32 17.5 22.5 64.5 72 55.3 32 12.5 17.5 60 67.5

Spd ø100 64.8 32 23 28 68.5 76 69.8 32 23 28 68.5 76 64.8 32 18 23 64 71.5

Contr *1: T8 switch cannot be mounted on side A (the side with position locking mechanism).
*2: Only F switch is available for the ø20 or ø25 piping port surface.
Ending *3: ‌In fields with two values, the left value is for 25 mm stroke length or less and the right for more than 25 mm stroke length in ø20 and ø25, and the left for 50 mm
stroke length or less and the right for more than 50 mm stroke length in ø80 and ø100.

852
 SSD2-Q Series
Double acting/position locking
Dimensions (with the 1-color display, 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch) SCP*3
● SSD2-QL-20 to 25-H (with switch/head side position locking)
CMK2

CMA2
FA
SCM

SCG
HD
SCA2
A
SCS2

FB
RD
CKV2
CAV2/
COVP/N2

SSD2

● SSD2-QL-32 to 100-H (with switch/head side position locking) SSG

SSD
FA

CAT

MDC2
HD
MVC
A
FB

SMG
RD
MSD/
MSDG

FC*

STK
Common F2H/F2V, F3H/F3V,
Code T0H/T0V, T5H/T5V T2H/T2V, T3H/T3V T2WH/T2WV, T3WH/T3WV F2S/F3S SRL3
dimensions F2YH/F2YV, F3YH/F3YV
Bore size (mm) FA FB HD RD HD RD HD RD HD RD HD RD
ø20 18.5 12.5 34 8.5 13.5 34 8.5 13.5 35.5 10.5 15.5 38 13 18 37 12 17 SRG3
ø25 20.5 13.5 35.5 10 15 35.5 10 15 37.5 12 17 40 14 19 39 13 18
ø32 23 20.5 38 9 38 9 40 11 SRM3
ø40 26.5 27.5 46 10.5 46 10.5 48 12
ø50 32.5 28.5 46 11 46 11 48 12.5
SRT3
ø63 39 28.5 46.5 12 46.5 12 48.5 14
ø80 49.5 28.5 78 14.5 19.5 78 14.5 19.5 80 16 21
MRL2
ø100 59 28.5 84.5 28 33 84.5 28 33 86.5 29.5 34.5
Code T2YH/T2YV, T3YH/T3YV, T2JH/T2JV T2YD, T2YDT, T1H/T1V T8H/T8V *1
MRG2
Bore size (mm) FA FB HD RD FA FB HD RD FA FB HD RD
SM‑25
ø20 24.3 16 32.5 7.5 12.5 29.3 16 32.5 7.5 12.5 24.3 16 27.5 2.5 7.5
ø25 26.3 17 34 8.5 13.5 31.3 17 34 8.5 13.5 26.3 17 29.5 3.5 8.5
ShkAbs
ø32 28.8 24 36.5 7.5 33.8 24 36.5 7.5 28.8 24 32 2.5
ø40 32.3 31 44.5 9 37.3 31 44.5 9 32.3 31 40 4
FJ
ø50 38.3 32 45 9 43.3 32 45 9 38.3 32 40 4.5
ø63 44.8 32 45 10.5 49.8 32 45 10.5 44.8 32 40 5.5
FK
ø80 55.3 32 76.5 13 18 60.3 32 76.5 13 18 55.3 32 72 8 13
ø100 64.8 32 83 26 31 69.8 32 83 26 31 64.8 32 78 21 26 Spd
*1: T8 switch cannot be mounted on side A (the side with position locking mechanism). Contr
*2: Only F switch is available for the ø20 or ø25 piping port surface.
*3: ‌In fields with two values, the left value is for 25 mm stroke length or less and the right for more than 25 mm stroke length in ø20 and ø25, and the left for 50 mm Ending
stroke length or less and the right for more than 50 mm stroke length in ø80 and ø100.

853
 Compact cylinder double acting/fine speed

SSD2-F/SSD2-KF Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications 1 MPa = 10 bar
SCG SSD2-F SSD2-KF
Item
SSD2-LF (with switch) SSD2-KLF (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi) 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C 5 (41°F) to 60 (140°F)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8 M5 Rc1/8 Rc1/4 Rc3/8
+1.0 +2.0
Stroke tolerance mm 0 0

SSG Working piston speed mm/s 1 to 200

Cushion None Rubber cushion
SSD Lubrication Not available
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56 0.04 0.09 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92
CAT *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MDC2
Stroke length Min. stroke length with switch (2 switches)
MVC Bore size Standard stroke length Max. stroke length Min. stroke length Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) (mm) (mm) (mm) (mm)
SMG ø12 5/10/15/20 ø12
30 10(5)
MSD/ ø16 25/30 ø16
MSDG ø20 5/10/15/20/25 ø20
50
ø25 30/35/40/45/50 ø25
FC*
ø32 5/10/15/20/25/30/ ø32
1 5
STK ø40 35/40/45/50/75/100 ø40
5
ø50 ø50
10/15/20/25 100
SRL3 ø63 ø63
30/35/40/45/50
ø80 ø80
75/100
SRG3 ø100 ø100
*1 : When using the type with switch, refer to the table of the min. stroke length with *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic field
SRM3 switch. proof, T1* or T8* switch is not available.
*2 : Refer to pages 763 and 765 (F and LF) or page 789 (KF) for the min. *2: Values in ( ) are for the type with 1 on rod side.
stroke length with mounting bracket LB.
SRT3
Custom stroke length
MRL2
● SSD2-F Series
Standard products A + stroke length
MRG2
Item
Standard stroke length body with spacer B + stroke length
SM‑25 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
Description
ShkAbs stroke length in 1 mm increments.
Bore size Stroke range
FJ 12/16 1 to 29
Stroke range
20 to 25 1 to 49
FK
32 to 100 1 to 99
Spd Model No.: SSD2-F-32-38
Contr Example of model No. A +2 mm spacer is added to the SSD2-F-32-40 standard cylinder
to create 38 mm stroke length. B + stroke length is 63 mm.
Ending

854
 SSD2-F/SSD2-KF Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV
F2S F3S F2H/F2V F3H/F3V F3YH/F3YV
F2YV (made to order)
Dedicated for For programmable Dedicated for For programmable CMA2
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
SCG
Yellow LED Red/green Red/green
LED Yellow LED
Indicator lamp
(Lit when ON)
(Lit when LED
(Lit when ON)
LED SCA2
ON) (Lit when ON) (Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
SCS2
Weight g 1 m:10 3 m:29

Switch specifications (T switch) CKV2

● 1-color/2-color display/for AC magnetic field proof
CAV2/
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire COVP/N2
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT SSD2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SSG
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SSD
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA CAT
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without indicator LED
(Lit when when LED (Lit LED (Lit when LED (Lit LED (Lit LED (Lit LED MDC2
lamp (Lit when ON) lamp (Lit when ON)
ON) ON) when ON) when ON) ON) when ON) when ON) when ON) (Lit when ON)
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA MVC
current ≤ 2 mA at 200 VAC less
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
SMG
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
MSD/
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. MSDG
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C)
FC*
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire. STK
Theoretical thrust table (Unit: N)
Bore size Operating
SRL3
Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102 SRG3
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8

ø16
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102 SRM3
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
Push - 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20 SRT3
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25 MRL2
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102 MRG2
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 SM‑25
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103

ø63
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103 ShkAbs
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103
ø80 FJ
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100 FK
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

Dimensions Spd
Contr
Same as SSD2 Series (double acting/single rod) and SSD2-K Series (double acting/high load).
Ending
Refer to pages 760 to 766 and 782 to 790.
855
 SSD2-F/SSD2-KF Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.

CMK2 SSD2-F 12 5 N LB I SSD2-F Double acting/single rod

SSD2-LF Double acting/single rod/with switch
With switch (built-in magnet for switch) SSD2-KF Double acting/high load
CMA2 SSD2-LF 12 10 T0H R N LB I SSD2-KLF Double acting/high load/with switch
B Bore size (mm)
SCM 12 ø12
16 ø16
SCG A Model No. 20 ø20
25 ø25
32 ø32
SCA2 B Bore size
40 ø40
50 ø50
SCS2 63 ø63
80 ø80
CKV2 100 ø100
C Port thread
CAV2/ C Port thread Blank Rc thread
COVP/N2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
SSD2
D Stroke length (mm)
D Stroke length
SSG Refer to the stroke length table on the following page.
E Switch model No.
SSD E Switch model No.
Voltage Bore size
Contact

Lead wire
Lead wire Lead
*1 Display
*2 StraightL-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
CAT *3 - F2S* ● 2-wire ● ●

*8 - F3S* ● 3-wire ● ●
1-color display
● ● ●
Proximity

*10 F2H* F2V* 2-wire

MDC2 F3H* F3V* ● 3-wire ● ●
F Switch quantity
F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
MVC G Option F2YH* F2YV* ● 2-wire ● ●
*4 2-color display
F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
SMG Precautions for model No. selection
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●

MSD/ *1 : The T2YD* switch cannot be mounted on the ø12 T8H* T8V* ● ● 1-color display ● ● ● ● ●
MSDG and ø16 bore sizes. T1H* T1V* ● ● ● ● ● ● ● ● ●
*2 : The T8* switch cannot be mounted on the ø12 to 2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●
ø32 bore sizes.
FC* *3 : The F switch can only be mounted on the piping
T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
3-wire
port surface of bore sizes ø20 and ø25. T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
Proximity

STK *4 : Piston rod of ø12 to ø25 is stainless steel as standard. T2WH* T2WV*
2-wire
C snap ring is stainless steel instead of steel. T2YH* T2YV* ● ● ● ● ● ● ● ● ●
The rod end male thread nut is stainless steel. 2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●
SRL3 *5 : The mounting bracket is included at shipment. 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
*6 : The projection dimension of piston rod WF
T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
when LB or FA is selected is different from that 2-wire
SRG3 of the standard. Refer to the dimensions on T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
pages 761, 763, 765 and 766. The number of T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
the specified protruding dimension will be * Lead wire length
SRM3 added at the end of the model No. printed on Blank 1 m (standard)
the metal plate on the body.
*7 : ”I” and “Y” cannot be selected together. 3 3 m (option)
SRT3 *8 : The F switch with L lead wire on ø20 models cannot 5 5 m (option) *11
be selected on stroke lengths of 15 mm or under. F Switch quantity
MRL2 *9 : Refer to pages 750 and 751 for combinations R 1 on rod side
of variations/options.
*10 : Switches are shipped with the product. Contact CKD H 1 on head side
MRG2 if assembling before shipment is necessary. D 2
*11 : F type switch cannot be selected.
G Option
SM‑25 [Example of model No.] Blank Rod end female thread
SSD2-LF-12-10-T0H-R-N-LB-I N Rod end male thread
ShkAbs Model: Compact cylinder, fine speed M *4 Piston rod material (stainless steel)

●
B Bore size : ø12 mm H Mounting bracket
Mounting
●
H
FJ C Port thread : Rc thread Blank Without mounting bracket
bracket
●
D Stroke length : 10mm
*5
LB Axial foot
FK ●
E Switch model No. : ‌Reed switch T0H, lead
*6
CB Clevis bracket (pin and snap ring included)
wire length 1 m FA Rod side flange
Spd ● F Switch quantity : 1 on rod side FB Head side flange
Contr ●
G Option : Rod end male thread I Accessory (available when rod end male thread “N” is selected)
●
H Mounting bracket : Axial foot I Accessory I Rod eye
Ending ●
I Accessory : Rod eye *7 Y Rod clevis (pin and snap ring included)

856
 SSD2-F/SSD2-KF Series
How to order
[Stroke length table] SCP*3
● SSD2-F/SSD2-KF
Applicable bore size CMK2
Stroke length (mm)
12 16 20 25 32 40 50 63 80 100
5 ● ● ● ● ● ● CMA2
10 ● ● ● ● ● ● ● ● ● ●
15 ● ● ● ● ● ● ● ● ● ● SCM
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ●
SCG
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ●
SCA2
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ● SCS2
45 ● ● ● ● ● ● ● ●
50 ● ● ● ● ● ● ● ● CKV2
75 ● ● ● ● ● ●
CAV2/
100 ● ● ● ● ● ●
COVP/N2
Min. stroke length (mm) *1 1
Max. stroke length (mm) 30 50 100 SSD2
Custom stroke length *2 In 1 mm increments
SSG
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available.
Refer to page 854 for the min. stroke length with switch. SSD
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length.
*3 : Refer to pages 763 and 765 (F and LF) or page 789 (KF) for the min. stroke length with mounting CAT
bracket LB.
MDC2

How to order switch MVC

SW T0H SMG
MSD/
MSDG
Switch model No.
FC*
(Item E on page 856)

STK

How to order mounting bracket SRL3

Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 SRG3
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SRM3
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50
SRT3
Bore size (mm)
ø63 ø80 ø100
Mounting bracket MRL2
Foot (LB) SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Flange (FA/FB) SSD2-FA-63 SSD2-FA-80 SSD2-FA-100 MRG2
Clevis bracket (CB) SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
*1: The foot mounting bracket is provided as 2 pcs./set. SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

857
 Compact cylinder double acting/low speed

SSD2-O Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-O
Item
SSD2-OL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
+1.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 10 to 200

Cushion None
SSD Lubrication Not available
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MDC2
Stroke length Min. stroke length with switch (2 switches)
MVC Bore size Standard stroke Max. stroke length Min. stroke length Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) (mm) (mm) (mm)
SMG ø12 5/10/15/20 ø12
30 10(5)
ø16 25/30 ø16
MSD/ ø20
ø20 5/10/15/20/25
MSDG 50 ø25
ø25 30/35/40/45/50
ø32
FC* ø32 5/10/15/20/25/30/ ø40
5
1 5
ø40 35/40/45/50/75/100 ø50
STK ø50 ø63
10/15/20/25 100
ø63 ø80
SRL3 30/35/40/45/50 ø100
ø80
75/100 *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic
ø100
SRG3 field proof, T1* or T8* switch is not available.
*1 : When using the type with switch, refer to the table of the min. stroke length with switch. *2: Values in ( ) are for the type with 1 on rod side.
*2 : Refer to pages 763 and 765 for the min. stroke length with mounting
SRM3 bracket LB.

SRT3
Custom stroke length
MRL2 ● SSD2-O Series
Standard products A + stroke length
Item
MRG2 Standard stroke length body with spacer B + stroke length
Model No. Refer to How to order.
SM‑25 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
ShkAbs Bore size Stroke range
12/16 1 to 29
FJ Stroke range
20 to 25 1 to 49
32 to 100 1 to 99
FK
Model No.: SSD2-O-32-38
Spd Example of model No. A +2 mm spacer is added to the SSD2-O-32-40 standard cylinder
Contr
to create 38 mm stroke length. B + stroke length is 63mm.

Ending

858
 SSD2-O Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Applications Dedicated for For programmable Dedicated for For programmable CMA2
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCM
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less SCG
LED Yellow LED Red/green Red/green
Indicator lamp Yellow LED
(Lit when ON) (Lit when ON)
LED (Lit when ON)
LED
(Lit when ON) (Lit when ON) SCA2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29
SCS2
Switch specifications (T switch)
● 1-color/2-color display/for AC magnetic field proof CKV2
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD (*4) CAV2/
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V COVP/N2
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable controller, Dedicated for For programmable For programmable For programmable controller, relay, IC circuit For programmable For programmable
Applications relay, compact solenoid valve programmable controller controller, relay controller, relay (no indicator lamp), serial connection controller, relay controller SSD2
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SSG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
Red/green Red/green Yellow Red/green Red/green Red/green SSD
Indicator LED LED LED LED
LED (Lit LED (Lit LED LED
LED Without LED LED
lamp (Lit when ON) (Lit when ON)
(Lit when ON) (Lit when ON)
when ON)
when ON) (Lit when ON) (Lit when ON)
(Lit when ON) indicator lamp (Lit when ON) (Lit when ON)
CAT
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 MDC2
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
MVC
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. SMG
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. MSD/
*5 : The F type switch uses a bend-resistant lead wire. MSDG
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
FC*
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 36 86 44 86 53 95 61 103 70 112 72 114 - - - - - - - - - - - - STK
ø16 48 104 59 104 69 114 80 125 91 136 102 147 - - - - - - - - - - - -
ø20 63 118 75 150 88 163 101 176 113 188 126 201 139 214 152 227 165 240 203 278 - - - -
ø25 87 178 102 193 118 209 134 225 150 241 165 256 181 272 197 288 213 304 228 319 - - - - SRL3
ø32 122 236 144 258 166 280 188 302 209 323 231 345 253 367 275 389 297 411 318 432 494 542 604 652
ø40 183 326 210 353 236 379 263 406 290 433 316 459 342 485 369 512 395 538 472 565 646 695 776 825 SRG3
ø50 - - 341 535 383 577 425 619 467 661 510 704 552 746 594 788 636 830 678 872 1025 1082 1235 1292
ø63 - - 507 786 562 841 617 896 672 951 727 1006 782 1061 838 1117 893 1172 948 1227 1438 1502 1713 1777
ø80 - - 928 1341 1015 1428 1101 1514 1188 1601 1274 1687 1361 1774 1448 1861 1535 1948 1621 2034 2401 2467 2833 2899 SRM3
ø100 - - 1433 2000 1547 2114 1660 2227 1774 2341 1888 2455 2002 2569 2115 2682 2229 2796 2343 2910 3406 3478 3973 4045

Theoretical thrust table (Unit: N) SRT3

Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MRL2
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102 MRG2
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
Push - 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20 SM‑25
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102 ShkAbs
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 FJ
ø40
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
FK
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103 Spd
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 Contr
ø80
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103

ø100
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103 Ending
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

859
 SSD2-O Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-O 12 5 N LB I SSD2-O Double acting/single rod
SSD2-OL Double acting/single rod/with switch
With switch (built-in magnet for switch)
CMA2
B Bore size (mm)
SSD2-OL 12 10 T0H R N LB I 12 ø12
16 ø16
SCM 20 ø20
25 ø25
SCG A Model No.
32 ø32
40 ø40
SCA2 B Bore size 50 ø50
63 ø63
80 ø80
SCS2
100 ø100

CKV2 C Port thread

C Port thread Blank Rc thread
CAV2/ NN NPT thread (ø32 and over) (made-to-order product)
COVP/N2 GN G thread (ø32 and over) (made-to-order product)

SSD2 D Stroke length (mm)

D Stroke length
Refer to the stroke length table on the following page.
SSG E Switch model No.
E Switch model No. Lead wire Lead wire
Contact
Voltage Lead Bore size
*1 Display
SSD *2
Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
*3 - F2S* ● 2-wire ● ●
CAT *8 - F3S* ● 3-wire ● ●
1-color display
Proximity

*10 F2H* F2V* ● 2-wire ● ●

F3H* F3V* ● 3-wire ● ●
MDC2 F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
MVC G Option 2-color display
F3YH* F3YV* ● 3-wire ● ●
*4
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
Reed

SMG Precautions for model No. selection T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●
T8H* T8V* ● ● 1-color display ● ● ● ● ●
MSD/ *1 : The T2YD* switch cannot be mounted on the ø12 T1H* T1V* ● ● ● ● ● ● ● ● ●
MSDG and ø16 bore sizes. 2-wire
*2 : The T8* switch cannot be mounted on the ø12 to T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●
ø32 bore sizes. T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
FC* *3 : The F switch can only be mounted on the piping 3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
port surface of bore sizes ø20 and ø25.
Proximity

*4 : Piston rod of ø12 to ø25 is stainless steel as T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●

STK standard. C snap ring is stainless steel instead of 2-wire
T2YH* T2YV* ● ● ● ● ● ● ● ● ●
steel. 2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●
The rod end male thread nut is stainless steel. 3-wire
SRL3 *5 : The mounting bracket is included at shipment. T3YH* T3YV* ● ● ● ● ● ● ● ● ●
*6 : The projection dimension of piston rod WF T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
when LB or FA is selected is different from 2-wire
SRG3 T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
that of the standard.
Refer to the dimensions on pages 761, 763, T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
765 and 766. The number of the specified * Lead wire length
SRM3 protruding dimension will be added at the
end of the model No. printed on the metal Blank 1 m (standard)
plate on the body. 3 3 m (option)
SRT3 *7 : “I” and “Y” cannot be selected together. 5 5 m (option) *11
*8 : The F switch with L lead wire on ø20 models cannot
be selected on stroke lengths of 15 mm or under. F Switch quantity
MRL2 *9 : Refer to pages 750 and 751 for combinations
of variations/options. R 1 on rod side
*10 : Switches are shipped with the product. Contact H 1 on head side
MRG2 CKD if assembling before shipment is necessary. D 2
*11 : F type switch cannot be selected.
G Option
SM‑25 [Example of model No.]
Blank Rod end female thread
SSD2-OL-12-10-T0H-R-N-LB-I N Rod end male thread
ShkAbs Model: Compact cylinder double acting/low speed M *4 Piston rod material (stainless steel)
●
B Bore size : ø12 mm H Mounting bracket
FJ ●
C Port thread : Rc thread H Mounting Blank Without mounting bracket
●
D Stroke length : 10mm bracket LB Axial foot
FK ●
E Switch model No. : R
‌ eed switch T0H, lead *5
CB Clevis bracket (pin and snap ring included)
wire length 1 m *6
FA Rod side flange
Spd ● F Switch quantity : 1 on rod side
FB Head side flange
Contr ●G Option : Rod end male thread
●
H Mounting bracket : Axial foot I Accessory (available when rod end male thread “N” is selected)
Ending ●
I Accessory : Rod eye
I Accessory I Rod eye
*7
Y Rod clevis (pin and snap ring included)
860
 SSD2-O Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 858 for the min. stroke length with switch.
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length. SSD
*3 : Refer to pages 763 and 765 for the min. stroke length with mounting bracket LB.
CAT

MDC2
How to order switch
SW T0H MVC

SMG
MSD/
Switch model No.
MSDG
(Item E on page 860)
FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø12 ø16 ø20 ø25 ø32 ø40 ø50
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SRG3
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SRM3
Bore size (mm)
ø63 ø80 ø100 SRT3
Mounting bracket
Foot (LB) SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Flange (FA/FB) SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
MRL2
Clevis bracket (CB) SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.

SM‑25

ShkAbs

FJ
Dimensions
FK
Same as SSD2 Series (double acting/single rod). Refer to pages 760 to 766. Spd
Contr

Ending

861
 SSD2-O Series
SCP*3
Internal structure and parts list (ø12 to 50)
● SSD2-O-L-12 to 25 (double acting/with switch) ● SSD2-O-L-32 to 50 (double acting/with switch)
CMK2
1 2 3 4 5 6 7 8 10 9 11 1 2 3 4 5 6 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-O-12 to 25 (double acting) ● SSD2-O-32 to 50 (double acting)

1 2 3 4 5 6 9 10 11
CAT 1 2 3 4 5 6 9 10 11

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3 No. Part name Material Remarks No. Part name Material Remarks
ø12 to ø25: Stainless steel ø16 to ø50:
1 Piston rod 7 Spacer Aluminum alloy ø12 to ø32: Chromate
SRT3 ø32 to ø50: Steel Industrial chrome plating
2 C snap ring Steel Zinc phosphate 8 Magnet Plastic
MRL2 3 Rod metal Special aluminum Alumite 9 Piston Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber
MRG2 5 Body Aluminum alloy Hard alumite
11 Cover
ø12 to ø25: Stainless steel
ø32 to ø50: Alumite
6 Rod packing Nitrile rubber ø32 to ø50: Aluminum alloy

SM‑25
Repair parts list
ShkAbs Bore size (mm) Kit No. Repair parts No.
ø12 SSD2-O-12K
FJ ø16 SSD2-O-16K
ø20 SSD2-O-20K
FK ø25 SSD2-O-25K 4 6 10

Spd ø32 SSD2-O-32K

Contr ø40 SSD2-O-40K
ø50 SSD2-O-50K
Ending

862
 SSD2-O Series
Internal structure and parts list
Internal structure and parts list (ø63 to ø100) SCP*3
● SSD2-O-L-63 to 100 (double acting/with switch)
CMK2
1 6 2 3 4 12 5 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-O-63 to 100 (double acting) SSD

1 6 2 3 4 12 5 9 10 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod Steel Industrial chrome plating 7 Spacer Aluminum alloy
2 C snap ring Steel Zinc phosphate 8 Magnet Plastic SRT3
3 Rod metal Aluminum alloy Chromate 9 Piston Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber MRL2
5 Body Aluminum alloy Hard alumite 11 Cover Aluminum alloy Alumite
6 Rod packing Nitrile rubber 12 Bush Oiles drymet *1 MRG2
*1: Material is steel for copper and PTFE free specifications.
SM‑25
Repair parts list
Bore size (mm) Kit No. Repair parts No. ShkAbs
ø63 SSD2-O-63K
ø80 SSD2-O-80K 4 6 10 FJ
ø100 SSD2-O-100K
FK
Spd
Contr

Ending

863
 Compact cylinder double acting/high load/low friction

SSD2-KU Series
SCP*3 ● Bore size: ø20/ø25/ø32/ø40
CMK2
ø50/ø63/ø80/ø100
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-KU
Item
SSD2-KUL (with switch)
SCA2 Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 0.7 (≈100 psi, 7 bar)
CKV2
Min. working pressure MPa 0.03 (≈4.4 psi, 0.3 bar)
CAV2/ Proof pressure MPa 1.0 (≈150 psi, 10 bar)
COVP/N2 Ambient temperature °C 5 (41°F) to 60 (140°F)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 10 to 500 10 to 300
SSD Cushion Rubber cushion
Lubrication Not available
CAT Allowable absorbed energy J 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92
Internal leakage ℓ/min 5 8
MDC2

MVC
Stroke length Min. stroke length with switch (1 or 2 switches)
SMG Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) length (mm) length (mm) (mm)
MSD/ ø20 5/10/15/20/25 ø20
MSDG 50
ø25 30/35/40/45/50 ø25
FC* ø32 5/10/15/20/25/30/ ø32
ø40 35/40/45/50/75/100 ø40
5 5 5
STK ø50 ø50
10/15/20/25 100
ø63 ø63
SRL3 30/35/40/45/50
ø80 ø80
75/100
ø100 ø100
SRG3
*1 : When using the type with switch, refer to the table of the min. stroke length with switch. *1: L
‌ ess than 10 mm with the 2-color display, off-delay, AC magnetic
*2 : Refer to page 789 for the min. stroke length with mounting bracket LB. field proof, T1* or T8* switch is not available.
SRM3

SRT3 Custom stroke length

MRL2 ● SSD2-KU Series A + stroke length
Standard products
Item B + stroke length
MRG2 Standard stroke length body with spacer
Model No. Refer to How to order.
SM‑25 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
ShkAbs Bore size Stroke range
Stroke range 20 to 25 1 to 49
FJ 32 to 100 1 to 99
Model No.: SSD2-KU-32-41
FK A +4 mm spacer is added to the SSD2-KU-32-45 standard
Example of model No.
Spd cylinder to create 41 mm stroke length.
Contr B + stroke length is 78mm.

Ending

864
 SSD2-KU Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F3PH/F3PV
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order) CMA2
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
SCA2
LED Yellow LED Red/green Yellow LED
Red/green
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) SCS2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 CKV2
Switch specifications (T switch) CAV2/
● 1-color/2-color display/for AC magnetic field proof COVP/N2
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
SSD2
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT SSG
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SSD
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - CAT
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA MDC2
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green
Indicator LED Without LED MVC
(Lit when when LED LED when LED (Lit LED LED LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) when ON) (Lit when ON) (Lit when ON) (Lit when ON)
SMG
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less MSD/
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 MSDG
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 FC*
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. STK
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SRL3
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire. SRG3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SRM3
(mm) direction 0.03 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7
SRT3
Push 9.42 31.4 47.1 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102
ø20
Pull 7.07 23.6 35.3 47.1 70.7 94.2 1.18×10 2
1.41×10 2
1.65×10 2
MRL2
Push 14.7 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102
ø25
Pull 11.3 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 MRG2
Push 24.1 80.4 1.21×10 2
1.61×10 2
2.41×10 2
3.22×10 2
4.02×10 2
4.83×10 2
5.63×102
ø32
Pull 18.1 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 SM‑25
Push 37.7 1.26×10 2
1.88×10 2
2.51×10 2
3.77×10 2
5.03×10 2
6.28×10 2
7.54×10 2
8.80×102
ø40
Pull 31.7 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 ShkAbs
Push 58.9 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103
ø50
Pull 49.5 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 FJ
Push 93.5 3.12×10 2
4.68×10 2
6.23×10 2
9.35×10 2
1.25×10 3
1.56×10 3
1.87×10 3
2.18×10 3
ø63 FK
Pull 84.0 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103
Push 1.51×10 2
5.03×10 2
7.54×10 2
1.01×10 3
1.51×10 3
2.01×10 3
2.51×10 3
3.02×10 3
3.52×10 3
Spd
ø80
Pull 1.36×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 Contr
Push 2.36×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103
ø100 Ending
Pull 2.14×10 2
7.15×10 2
1.07×10 3
1.43×10 3
2.14×10 3
2.86×10 3
3.57×10 3
4.29×10 3
5.00×103

865
 SSD2-KU Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Bore size (mm)

CMK2 SSD2-KU 20 10 N LB I 20 ø20

25 ø25
With switch (built-in magnet for switch)
32 ø32
CMA2 SSD2-KUL 20 10 T0H R N LB I 40 ø40
50 ø50
SCM
63 ø63
80 ø80
SCG A Bore size
100 ø100

SCA2 B Port thread

B Port thread Blank Rc thread
NN NPT thread (ø32 and over) (made-to-order product)
SCS2
GN G thread (ø32 and over) (made-to-order product)

CKV2 C Stroke length (mm)

C Stroke length
Refer to the stroke length table on the following page.
CAV2/
COVP/N2 D Switch model No.
D Switch model No. Lead wire Lead wire Voltage Lead Bore size

Contact
SSD2 *1
Straight L-shaped AC DC
Display
wire 20 25 32 40 50 63 80 100
*6
- F2S* ● 2-wire ● ●
SSG *8
- F3S* ● 3-wire ● ●
1-color display
F2H* F2V* ● 2-wire ● ●
Proximity

SSD F3H* F3V* ● 3-wire ● ●

E Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
CAT F2YH* F2YV* ● 2-wire ● ●
2-color display
F Option F3YH* F3YV* ● 3-wire ● ●
MDC2 *2 T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

MVC G Mounting bracket
T8H* T8V* ● ● 1-color display ● ● ● ● ●
*3
T1H* T1V* ● ● ● ● ● ● ● ● ●
*4 2-wire
SMG T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●

MSD/ Precautions for model No. selection T3H* T3V* ●

3-wire
● ● ● ● ● ● ● ●

MSDG *1 : The F switch can only be mounted on the piping port T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
T2WH* T2WV* ● ● ● ● ● ● ● ● ●
Proximity

surface of bore sizes ø20 and ø25. 2-wire

FC* *2 : Piston rod of ø20 and ø25 is stainless steel as T2YH* T2YV* ● ● ● ● ● ● ● ● ●
2-color display
standard. C snap ring is stainless steel instead of T3WH* T3WV* ● ● ● ● ● ● ● ● ●
steel. The rod end male thread nut is stainless steel. 3-wire
STK T3YH* T3YV* ● ● ● ● ● ● ● ● ●
*3 : The mounting bracket is included at shipment.
*4 : The projection dimension of piston rod WF when LB T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
SRL3 or FA is selected is different from that of the T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
standard. Refer to the dimensions on pages 783, T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
785, 787, 789 and 790. The number of the specified
SRG3 protruding dimension will be added at the end of the * Lead wire length
model No. printed on the metal plate on the body. Blank 1 m (standard)
SRM3 *5 : “I” and “Y” cannot be selected together. 3 3 m (option)
*6 : The F switch with L lead wire on ø20 models cannot
5 5 m (option) *9
be selected on stroke lengths 10 mm or under.
SRT3 *7 : Refer to pages 750 and 751 for combinations E Switch quantity
of variations/options.
R 1 on rod side
*8 : Switches are shipped with the product. Contact CKD if
MRL2 assembling before shipment is necessary. H 1 on head side
*9 : F type switch cannot be selected. D 2
MRG2
[Example of model No.] F Option
Blank Rod end female thread
SM‑25 SSD2-KUL-20-10-T0H-R-N
N Rod end male thread
Model: Compact cylinder, high load/low friction M *2 Piston rod material (stainless steel)
ShkAbs ●
A Bore size : ø20 mm
G Mounting bracket
●B Port thread : Rc thread
FJ ●
C Stroke length : 10mm Blank Without mounting bracket

●
D Switch model No. : Reed T0H switch LB Axial foot
FK · Lead wire 1 m CB Clevis bracket (pin and snap ring included)
●
E Switch quantity : 1 on rod side FA Rod side flange
Spd ● F Option : Rod end male thread FB Head side flange
Contr
H Accessory (available when rod end male thread “N” is selected)
H Accessory I Rod eye
Ending *5
Y Rod clevis (pin and snap ring included)
866
 SSD2-KU Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 CMK2
5 ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) 5 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 10 mm with the 2-color display, off-delay, strong magnetic field proof, T1* or T8* switch is
not available. SSG
Refer to page 864 for the min. stroke length with switch.
*2 : The total length is the same as that of the next longer standard stroke length.
*3 : Refer to page 789 for the min. stroke length with mounting bracket LB. SSD

CAT
How to order mounting bracket
Bore size (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 MDC2
Mounting bracket
Foot (LB) SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100 MVC
Flange (FA/FB) SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100 SMG
*1: The foot mounting bracket is provided as 2 pcs./set.
MSD/
MSDG

FC*

STK

SRL3
Dimensions
SRG3
Same as SSD2-K Series (double acting/high load). Refer to pages 782 to 790.
SRM3

Technical data SRT3

Refer to SCM-U Series on page 306 for technical data regarding sliding resistance values. MRL2
SSD2-KU Series shows a similar trend to the data of “SCM-U Series”.
MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

867
 Compact cylinder double acting/double rod

SSD2-D Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-D
Item
SSD2-DL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
+2.0
Stroke With rubber cushion 0

SSG tolerance mm Without cushion +1.0

0

Working piston speed mm/s 50 to 500 50 to 300

SSD Cushion With or without cushion can be selected
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
CAT Allowable absorbed With rubber cushion 0.03 0.05 0.10 0.16 0.16 0.44 0.75 0.78 2.51 3.92
energy J Without cushion 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
MDC2 *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MVC
Stroke length
SMG Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø12 5/10/15/20
MSD/ 30
ø16 25/30
MSDG
ø20 5/10/15/20/25
50 5
FC* ø25 30/35/40/45/50
ø32 5/10/15/20/25/30/
STK ø40 35/40/45/50/75/100
ø50
SRL3 10/15/20/25 100
ø63
30/35/40/45/50 10
ø80
SRG3 75/100
ø100
*: Refer to page 881 for the min. stroke length with mounting bracket LB.
SRM3

SRT3
Min. stroke length with switch (1 or 2 switches)
Bore size (mm) T0H/V / T5H/V T2H/V / T3H/V
MRL2
ø12

MRG2 ø16
ø20
SM‑25 ø25
ø32
5 5
ShkAbs ø40
ø50
FJ ø63
ø80
FK ø100
Spd Note: ‌Less than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch is not
Contr available.

Ending

868
 SSD2-D Series
Specifications
Switch specifications (F switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Dedicated for For programmable Dedicated for For programmable CMA2
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less SCG
Yellow LED Red/green Red/green
LED Yellow LED
Indicator lamp LED LED SCA2
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 SCS2
Switch specifications (T switch) CKV2
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire CAV2/
Item T2H/T2V/ T2YH/ T2WH/ T3PH/ T3YH/ T3WH/ T2YD(*4) COVP/N2
T1H/T1V T3H/T3V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3PV T3YV T3WV T2YDT
For programmable
SSD2
Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
SSG
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
SSD
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED (Lit Red/green Red/green LED (Lit Yellow Red/green Red/green Red/green CAT
Indicator LED Without indicator LED
(Lit when when LED LED when LED (Lit LED LED LED
lamp (Lit when ON) lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) when ON) (Lit when ON) (Lit when ON) (Lit when ON) MDC2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less
MVC
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 SMG
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. MSD/
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. MSDG
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. FC*
*5 : The F type switch uses a bend-resistant lead wire.

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) STK
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch SRL3
ø12 52 105 60 105 69 115 77 124 86 134 95 147 - - - - - - - - - - - -
ø16 74 133 85 133 95 144 106 156 117 168 128 177 - - - - - - - - - - - - SRG3
ø20 131 187 143 222 161 238 179 254 196 269 214 285 232 301 249 316 267 332 284 347 - - - -
ø25 147 238 162 253 178 269 194 285 210 301 226 316 242 332 257 348 275 364 288 379 - - - - SRM3
ø32 184 299 230 344 275 390 322 436 366 481 413 527 459 573 469 612 485 628 522 665 776 785 1004 1012
ø40 283 426 310 453 336 479 363 506 390 533 416 569 443 601 507 617 553 663 601 707 1317 1333 1475 1490 SRT3
ø50 - - 508 702 558 751 608 803 658 851 708 901 758 950 808 1001 835 1033 911 1105 2007 2025 2252 2270
ø63 - - 902 1266 977 1341 1052 1416 1127 1491 1202 1566 1278 1642 1353 1717 1428 1792 1503 1867 2218 2242 2593 2617 MRL2
ø80 - - 1608 1538 1725 1916 1841 2294 1958 2411 2074 2527 2191 2649 2308 2771 2425 2888 2541 3004 3560 3587 4143 4169
ø100 - - 2483 3105 2652 3254 2820 3402 2989 3586 3158 3770 3327 3934 3495 4097 3664 4261 3833 4425 5213 5245 6033 6065
MRG2
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SM‑25
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ø12 Push/Pull - 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8 ShkAbs
ø16 Push/Pull - 22.6 30.2 45.2 60.3 75.4 90.5 1.06 × 102 1.21 × 102 1.36 × 102 1.51 × 102
ø20 Push/Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102 FJ
ø25 Push/Pull - 56.7 75.6 1.13 × 10 1.51 × 10 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
2 2

ø32 Push/Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102 FK
ø40 Push/Pull - 1.58 × 10 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
2

ø50 Push/Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103 Spd
ø63 Push/Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
Contr
ø80 Push/Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103
Ending
ø100 Push/Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103

869
 SSD2-D Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
SSD2-D Double acting/double rod
CMK2 SSD2-D 12 5 N LB I SSD2-DL Double acting/double rod/with switch
With switch (built-in magnet for switch) B Bore size (mm)
CMA2 SSD2-DL 12 10 T0H R N LB I 12 ø12
16 ø16
SCM 20 ø20
25 ø25
A Model No. 32 ø32
SCG 40 ø40
50 ø50
SCA2 B Bore size 63 ø63
80 ø80
100 ø100
SCS2
C Port thread
C Port thread Blank Rc thread
CKV2 NN NPT thread (ø32 and over) (made-to-order product)
D Cushion GN G thread (ø32 and over) (made-to-order product)
CAV2/
COVP/N2 E Stroke length D Cushion
Blank Without cushion
SSD2 F Switch model No. D With rubber cushion
*1, *2 E Stroke length (mm)
SSG *3, *8
*9 Refer to the stroke length table on the following page.
G Switch quantity F Switch model No.
SSD
Lead wire Lead wire Voltage Lead Bore size
Contact
H Option *4 Display
Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
CAT - F2S* ● 2-wire ● ●
Precautions for model No. selection - F3S* ● 3-wire ● ●
1-color display
Proximity

MDC2 *1 : The T2YD* switch cannot be mounted on the ø12 and F2H* F2V* ● 2-wire ● ●
ø16 bore sizes. F3H* F3V* ● 3-wire ● ●
*2 : The T8* switch cannot be mounted on ø12 and ø16. F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
MVC *3 : The F switch can only be mounted on the piping port F2YH* F2YV* ● 2-wire ● ●
surface of bore sizes ø20 and ø25. 2-color display
F3YH* F3YV* ● 3-wire ● ●
*4 : Piston rod of ø12 to ø25 is stainless steel as standard.
SMG C snap ring is stainless steel instead of steel. T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
Reed

The rod end male thread nut is stainless steel. T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●
MSD/ *5 : The mounting bracket is included at shipment. T8H* T8V* ● ● 1-color display ● ● ● ● ● ● ● ●
MSDG *6 : The projection dimension of piston rod WF T1H* T1V* ● ● ● ● ● ● ● ● ● ● ●
when LB or FA is selected is different from that 2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ● ● ●
FC* of the standard. Refer to the dimensions on T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
pages 877, 879 and 881. The number of the 3-wire
specified protruding dimension will be added at T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ● ● ●
Proximity

the end of the model No. printed on the metal T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●
STK 2-wire
plate on the body. T2YH* T2YV* ● ● ● ● ● ● ● ● ● ● ●
*7 : ”I” and “Y” cannot be selected together. 2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ● ● ●
SRL3 *8 : The F switch with L type lead wire on ø20 models 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ● ● ●
cannot be selected on stroke lengths of 15 mm or
under. T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
SRG3 *9 : Switches are shipped with the product. Contact CKD if T2YDT* - ● AC magnetic field ● ● ● ● ● ● ● ●
assembling before shipment is necessary. T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ● ● ●
*10 : Refer to pages 750 and 751 for combinations of * Lead wire length
SRM3 variations/options. Blank 1 m (standard)
*11 : F type switch cannot be selected.
3 3 m (option)
SRT3 [Example of model No.] 5 5 m (option) *11

Switch quantity
SSD2-DL-12-5-T0H-R-N-LB-I G
MRL2 R 1 on rod side
Model: Compact cylinder double acting/double rod H 1 on head side
MRG2 ●
B Bore size : ø12 mm D 2
●
C Port thread : Rc thread
Option
●
H
D Cushion : No cushion
SM‑25 ● Bore size (mm) 12 16 20 25 32 40 50 63 80 100
E Stroke length : 5mm
Blank Rod end female thread ● ● ● ● ● ● ● ● ● ●
●
F Switch model No. : Reed T0H switch/
N Rod end male thread ● ● ● ● ● ● ● ● ● ●
ShkAbs Lead wire length 1 m
P6 Copper and PTFE free specifications Supported as standard ● ● ●
●
G Switch quantity : 1 on rod side
M *4 Piston rod material (stainless steel) ● ● ● ● ● ● ● ● ● ●
FJ
●
H Option : Rod end male thread P4 Specifications for rechargeable ● ● ● ● ● ● ● ● ● ●
●I Mounting bracket : Axial foot
P40 battery (made to order) ● ● ● ● ● ● ● ● ● ●
●J Accessory : Rod eye
FK I Mounting bracket
How to order switch I Mounting Blank Without mounting bracket
Spd bracket LB Axial foot
Contr SW T0H *5 FA Rod side flange
*6
J Accessory (available when rod end male thread “N” is selected)
Ending J Accessory I Rod eye
Switch model No. (Item F above) *7 Y Rod clevis (pin and snap ring included)
870
 SSD2-D Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 - By 5mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 868 for the min. stroke length with switch.
*2 : Available only for more than 50 mm stroke length.
SSD

CAT

How to order mounting bracket MDC2

Bore size (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50
Mounting bracket MVC
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50
Flange (FA) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SMG
Bore size (mm) MSD/
ø63 ø80 ø100
Mounting bracket MSDG
Foot (LB) SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
FC*
Flange (FA) SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
*1: The foot mounting bracket is provided as 2 pcs./set. STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

871
 SSD2-D Series
SCP*3
Internal structure and parts list (ø12 to 50) (no cushion)
● SSD2-DL-12 to 50 (double acting/double rod/with switch)
CMK2

CMA2 1 2 3 4 5 6 7 8 9 10 11

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
● SSD2-D-12 to 50 (double acting/double rod)
SSG

SSD 1 2 3 4 5 6 9 10 11

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
No. Part name Material Remarks No. Part name Material Remarks
SRG3 ø12 to ø25: Stainless steel ø16 to ø50: ø12, ø20, ø32, ø40: Aluminum alloy ø12, 20, 32, 40:
1 Piston rod ○
A 7 Spacer
ø32 to ø50: Steel Industrial chrome plating ø16, ø25, ø50: Special resin Chromate
SRM3 2 C snap ring Steel Zinc phosphate 8 Magnet Plastic
3 Rod metal Special aluminum Alumite 9 Piston Aluminum alloy Chromate
SRT3 4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber
5 Body Aluminum alloy Hard alumite ø12 to ø25: Stainless steel ø16 to ø50:
11 Piston rod ○
B
MRL2 6 Rod packing Nitrile rubber ø32 to ø50: Steel Industrial chrome plating

MRG2
Repair parts list
Bore size (mm) Kit No. Repair parts No.
SM‑25
ø12 SSD2-D-12K
ø16 SSD2-D-16K
ShkAbs
ø20 SSD2-D-20K
ø25 SSD2-D-25K 4 6 10
FJ
ø32 SSD2-D-32K
ø40 SSD2-D-40K
FK
ø50 SSD2-D-50K
Spd
Contr

Ending

872
 SSD2-D Series
Internal structure and parts list
Internal structure and parts list (ø63 to 100) (no cushion) SCP*3
● SSD2-DL-63 to 100 (double acting/double rod/with switch)
CMK2

1 2 3 4 6 12 5 7 8 10 9 11 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

● SSD2-D-63 to 100 (double acting/double rod) SSG

SSD
1 2 3 4 5 6 9 10 12 11

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod ○
A Steel Industrial chrome plating 7 Spacer Aluminum alloy Chromate SRG3
2 C snap ring Steel Zinc phosphate 8 Magnet Plastic
3 Rod metal Aluminum alloy Alumite 9 Piston Aluminum alloy Chromate SRM3
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber
5 Body Aluminum alloy Hard alumite 11 Piston rod ○
B Steel Industrial chrome plating SRT3
6 Rod packing Nitrile rubber 12 Bush Oiles drymet *1
*1: Material is steel for copper and PTFE free specifications. MRL2

Repair parts list MRG2

Bore size (mm) Kit No. Repair parts No.
ø63 SSD2-D-63K
SM‑25
ø80 SSD2-D-80K 4 6 10

ø100 SSD2-D-100K
ShkAbs

FJ

FK
Spd
Contr

Ending

873
 SSD2-D Series
SCP*3
Internal structure and parts list (ø12 to 50) (with rubber cushion)
● SSD2-DL-12D to 50D (double acting/double rod/with switch)
CMK2
1 2 3 4 6 5 7 8 10 9 12 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG ● SSD2-D-12D to 50D (double acting/double rod)

SSD 1 2 3 4 6 5 10 9 12 11

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
No. Part name Material Remarks No. Part name Material Remarks
SRM3 ø12 to ø25: Stainless steel ø16 to ø50: Industrial 8 Magnet Plastic
1 Piston rod ○
A
ø32 to ø50: Steel chrome plating
9 Piston Aluminum alloy Chromate
SRT3 2 C snap ring Steel Zinc phosphate
3 Rod metal Special aluminum Alumite 10 Piston packing Nitrile rubber
MRL2 4 Rod metal gasket Nitrile rubber ø12 to ø25: Stainless steel ø16 to ø50: Industrial
11 Piston rod ○
B
5 Body Aluminum alloy Hard alumite ø32 to ø50: Steel chrome plating
MRG2 6 Rod packing Nitrile rubber 12 Cushion rubber Urethane rubber
ø12, ø20, ø32, ø40: Aluminum alloy ø12, 20, 32, 40:
7 Spacer
SM‑25 ø16, ø25, ø50: Special resin Chromate

ShkAbs
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FJ
ø12 SSD2-D-12DK
ø16 SSD2-D-16DK
FK
ø20 SSD2-D-20DK
Spd ø25 SSD2-D-25DK 4 6 10 12
Contr ø32 SSD2-D-32DK
ø40 SSD2-D-40DK
Ending ø50 SSD2-D-50DK

874
 SSD2-D Series
Internal structure and parts list
Internal structure and parts list (ø63 to 100) (with rubber cushion) SCP*3
● SSD2-DL-63D to 100D (double acting/double rod/with switch)
CMK2
1 2 3 4 6 12 5 7 8 10 9 13 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG
● SSD2-D-63D to 100D (double acting/double rod)
SSD
1 2 3 4 6 12 5 9 10 13 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod ○
A Steel Industrial chrome plating 8 Magnet Plastic
2 C snap ring Steel Zinc phosphate 9 Piston Aluminum alloy Chromate SRT3
3 Rod metal Aluminum alloy Alumite 10 Piston packing Nitrile rubber
4 Rod metal gasket Nitrile rubber 11 Piston rod ○
B Steel Industrial chrome plating MRL2
5 Body Aluminum alloy Hard alumite 12 Bush Oiles drymet *1
6 Rod packing Nitrile rubber 13 Cushion rubber Urethane rubber MRG2
7 Spacer Aluminum alloy Chromate
*1: Material is steel for copper and PTFE free specifications. SM‑25

Repair parts list ShkAbs

Bore size (mm) Kit No. Repair parts No.
ø63 SSD2-D-63DK
FJ
ø80 SSD2-D-80DK 4 6 10 13

ø100 SSD2-D-100DK
FK
Spd
Contr

Ending

875
 SSD2-D Series
SCP*3
Dimensions
● SSD2-DL-12 to 25 (with switch) ● Rod end male thread
CMK2 A + (2 × stroke length) a’ wf
ø12/ø16 WF + stroke length c’
WF B + stroke length
CMA2 F T
8-J C D
(Mounting hole) N HD

øMM
2-EE
SCM
KK
KK
SCG FB
kk’

øMM
SCA2 Width across
N
F

flats M
*5 Width across flats H
FA

SCS2
FB 8-KA

øI
øK

CKV2 M RD

CAV2/ FA
*5
COVP/N2
ø20/ø25 A + (2 × stroke length)
SSD2 WF B + stroke length WF + stroke length
F HD
SSG 8-J N C D
2-EE
(Mounting hole)
SSD
KK KK
CAT
øMM
FB

MDC2
N
F

MVC

SMG
øI

8-KA
øK

M RD
*5
MSD/ FA
MSDG

FC*
Note: The positions for the left and right widths across flats are unspecified.
STK Code Common dimensions with switch
Bore size (mm) A B C D EE F FA *5 FB I J K KA KK M MM N WF
SRL3 ø12 34 27 5.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 34 27 5.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
SRG3 ø20 45 36 8 8 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 49 39 11 11 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
SRM3 Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Proximity F2S/F3S
dimensions T5H/T5V *6 T3H/T3V *6 T3WH/T3WV *6 F2YH/F2YV, F3YH/F3YV
SRT3 Bore size (mm) HD RD HD RD HD RD HD RD HD RD
ø12 5.5 3 5.5 3 7.5 4.5
MRL2 ø16 5 2 5 2 6.5 3.5
ø20 10 7.5 10 7.5 11.5 9.5 14 12 13 11

MRG2 ø25 11.5 9.5 11.5 9.5 11.5 11 15 13 14 12

*1 : Only F switch is available for the ø20 or ø25 piping port surface.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
SM‑25 *3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
ShkAbs *5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : The RD side can be identified with a mark on the port surface of the body.

FJ
● Dimensions of rod end male thread part
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

876
 SSD2-D Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch
SSD2-DL-12 to 25 -LB CMK2
Rod end male thread
A + (2 × stroke length)
CMA2
A + (2 × stroke length)
WF B + stroke length WF + stroke length
N
M
a’ wf B + stroke length wf + stroke length a’ SCM

SCG
N
AG

SCA2
AT
AH

Low head hexagon

TR
AU
socket bolt 8-G LF LF + stroke length SCS2
4-øAB AK
TS

LF LX + stroke length LF + stroke length CKV2

CAV2/
Code Common dimensions COVP/N2
Bore size
AB AG AH AK AT AU G N TR TS M
(mm) SSD2
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2
SSG
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2
Code Female thread Male thread SSD
Bore size
WF LF A B LX a’ wf LF A B LX
(mm) CAT
ø12 13.5 19.5 54 27 15 10.5 13.5 19.5 75 27 15
ø16 13.5 19.5 54 27 15 12 13.5 19.5 78 27 15
ø20 14.5 20.5 65 36 24 14 14.5 20.5 93 36 24 MDC2
ø25 15 22.5 69 39 24 17.5 15 22.5 104 39 24
MVC

SMG
MSD/
● Rod side flange (FA) with switch
MSDG
SSD2-DL-12 to 25 -FA
Rod end male thread
FC*
FM A + (2 × stroke length)
A + (2 × stroke length)
FL WF1 B + stroke length WF2 + stroke length
a’ wf1 B + stroke length wf2 + stroke length a’
STK
N FT
2-FD SRL3

SRG3
FH
N

SRM3
Mounting bolt 4-G
Hexagon socket button head bolt
SRT3

Code Common dimensions Female thread Male thread

MRL2
Bore size
FD FH FL FM FT N G WF1 WF2 A B a’ wf1 wf2 A B
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 13.5 3.5 44 27 11 13.5 3.5 65 27 MRG2
ø16 4.5 30 45 55 5.5 20 M4×12 13.5 3.5 44 27 12 13.5 3.5 68 27
ø20 6.6 39 48 60 8 25.5 M6×16 14.5 4.5 55 36 14 14.5 4.5 83 36 SM‑25
ø25 6.6 42 52 64 8 28 M6×16 15 5 59 39 18 15 5 94 39

ShkAbs

FJ

FK
Spd
Contr

Ending

877
 SSD2-D Series
SCP*3 Dimensions
● SSD2-D-12 to 25 (without switch) ● Rod end male thread
CMK2 a’ wf
A + (2 × stroke length)
ø12/ø16 c’
WF B + stroke length WF + stroke length
CMA2 8-J F C D
T

N 2-EE

øMM
(Mounting hole)
SCM
KK
KK
SCG
kk’

øMM
SCA2 Width across
N
F

flats M
Width across flats H
SCS2

øI
8-KA
øK

CKV2
M
CAV2/
COVP/N2
ø20/ø25 A + (2 × stroke length)
SSD2 WF B + stroke length WF + stroke length
F
8-J
SSG (Mounting hole)
N C 2-EE D

SSD
KK KK

CAT
øMM
N
F

MDC2

MVC
øI

8-KA
øK

SMG M

MSD/
MSDG

FC*
Note: The positions for the left and right widths across flats are unspecified.
Code Dimensions without switch and common dimensions
STK
Bore size (mm) A B C D EE F I J K KA KK M MM N WF
ø12 29 22 5.5 5.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
SRL3
ø16 29 22 5.5 5.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 35 26 8 8 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRG3
ø25 39 29 11 11 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5

SRM3
● Dimensions of rod end male thread part
SRT3 Code a’ c’ H kk’ M MM T wf
Bore size (mm)
MRL2 ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
MRG2 ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
SM‑25 *1: For dimensions of individual accessories, refer to pages 1046 to 1049.

ShkAbs

FJ

FK
Spd
Contr

Ending

878
 SSD2-D Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch
SSD2-D-12 to 25 -LB CMK2
Rod end male thread
A + (2 × stroke length)
A + (2 × stroke length)
CMA2
WF B + stroke length WF + stroke length
N a’ wf B + stroke length wf + stroke length a’
M SCM

SCG
N
AG

AT

SCA2
AH

Low head hexagon

AU
TR
4-øAB
socket bolt 8-G LF LF + stroke length SCS2
TS AK

LF LX + stroke length LF + stroke length CKV2

CAV2/
Code Common dimensions COVP/N2
Bore size
AB AG AH AK AT AU G N TR TS M
(mm) SSD2
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2
SSG
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2
Code Female thread Male thread SSD
Bore size
WF LF A B LX a’ wf LF A B LX
(mm) CAT
ø12 13.5 19.5 49 22 10 10.5 13.5 19.5 70 22 10
ø16 13.5 19.5 49 22 10 12 13.5 19.5 73 22 10
ø20 14.5 20.5 55 26 14 14 14.5 20.5 83 26 14 MDC2
ø25 15 22.5 59 29 14 17.5 15 22.5 94 29 14
MVC

SMG
MSD/
● Rod side flange (FA) without switch MSDG
SSD2-D-12 to 25 -FA
FC*

A + (2 × stroke length) Rod end male thread

FM STK
FL WF1 B + stroke length WF2 + stroke length
A + (2 × stroke length)
N FT SRL3
a’ wf1 B + stroke length wf2 + stroke length a’
2-FD
SRG3
FH
N

SRM3

Mounting bolt 4-G SRT3

Hexagon socket button head bolt
MRL2
Code Common dimensions Female thread Male thread
Bore size MRG2
FD FH FL FM FT N G WF1 WF2 A B a’ wf1 wf2 A B
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 13.5 3.5 39 22 11 13.5 3.5 60 22
SM‑25
ø16 4.5 30 45 55 5.5 20 M4×12 13.5 3.5 39 22 12 13.5 3.5 63 22
ø20 6.6 39 48 60 8 25.5 M6×16 14.5 4.5 45 26 14 14.5 4.5 73 26
ø25 6.6 42 52 64 8 28 M6×16 15 5 49 29 18 15 5 84 29 ShkAbs

FJ

FK
Spd
Contr

Ending

879
 SSD2-D Series
SCP*3
Dimensions
● SSD2-DL-32 to 100 (with switch) ● Rod end male thread
CMK2 F A + (2 × stroke length) a’ wf
N WF B + stroke length WF + stroke length c’
8-J HD T
CMA2 H C 2-EE D
(Mounting hole)

øMM
øK
O

SCM KK
KK

SCG kk’

øMM
Width across
FB
G

N
F

flats M
SCA2 Width across flats H

M *6

øI
SCS2 RD 8-KA
FA

CKV2 ● SSD2-D-32 to 100 (without switch)

F A + (2 × stroke length)
CAV2/ N WF B + stroke length WF + stroke length
COVP/N2 8-J
C 2-EE D
(Mounting hole) H
SSD2
øK
O

KK KK
SSG
øMM
G

N
F

SSD

CAT
M 8-KA
øI

MDC2 Note: The positions for the left and right widths across flats are unspecified.
Code Without switch Common dimensions with switch
MVC Bore size (mm) A *2, *8 B *3, *8 A *2 B *3 C *10 D *10 EE *9 F FA *6 FB G H I J K KA KK
ø32 44.5(54.5) 30.5(40.5) 54.5 40.5 8(10) 8(5.5) Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13

SMG ø40 54(64) 40(50) 64 50 12(11.4) 12(7.8) Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
ø50 56.5(66.5) 40.5(50.5) 66.5 50.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
MSD/ ø63 58(68) 42(52) 68 52 13 13 Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15
MSDG ø80 71(81) 51(61) 81 61 16 16 Rc3/8 98 49.5(53) 28.5 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21
ø100 84.5(94.5) 60.5(70.5) 94.5 70.5 23 23 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27
FC*
Switch dimensions
Code Common dimensions with switch
STK Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
Bore size (mm) M MM N O WF HD *4 RD *4 HD *4 RD *4 HD RD
ø32 14 16 34 4.5 7 11 9 11 9 12.5 10.5
SRL3
ø40 14 16 40 5 7 16.5 12 16.5 12 18 13.5
ø50 17 20 50 7 8 16.5 12.5 16.5 12.5 18 14
SRG3
ø63 17 20 60 7 8 18 13 18 13 19.5 14.5
ø80 22 25 77 6 10 23 15.5 23 15.5 24.5 17
SRM3
ø100 27 30 94 6.5 12 28.5 19.5 28.5 19.5 30 21
*1 : Custom stroke length is available only for more than 50 mm stroke lengths.
SRT3 *2 : To calculate A + (2 x stroke length) when using a custom stroke length, apply “A + next longer standard stroke length + custom stroke length”.
(Example) If the custom stroke length is 70 mm, apply “A + standard stroke length 75 mm + custom stroke length 70 mm”.
*3 : To calculate B + stroke length when using custom stroke length, apply the next longer standard stroke length instead of the custom stroke length.
MRL2 (Example) If the custom stroke length is 70 mm, apply the standard stroke length 75 mm.
*4 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*5 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
MRG2 *6 :
Dimensions in ( ) of FA are for the radial lead wire.
*7 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*8 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
SM‑25 *9 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*10 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
ShkAbs *11 : The RD side can be identified with a mark on the port surface of the body.
● Dimensions of rod end male thread part
FJ Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
FK ø32 23.5 20.5 22 M14×1.5 14 16 8 5
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Spd ø50 28.5 26 27 M18×1.5 17 20 11 5
Contr ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending ø100 35.5 32.5 41 M26×1.5 27 30 16 8

880
 SSD2-D Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● Axial foot (LB)
SSD2-D(L)-32 to 100 -LB CMK2
Rod end male thread
CMA2
A + (2 × stroke length) A + (2 × stroke length)
WF B + stroke length WF + stroke length a’ wf B + stroke length wf + stroke length a’ SCM
M M

SCG
AG

AH SCA2
AT

SCS2
AD
AE

AU Low head hexagon AU

N socket bolt 4-G
AK
TR
4-øAB AK CKV2
LF LX + stroke length LF + stroke length
TS LF LX + stroke length LF + stroke length
CAV2/
COVP/N2
Code Common dimensions SSD2
Bore size
AB AD AE AG AH AK AT AU G N TR TS M
(mm)
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 SSG
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 SSD
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5
CAT
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13
Code Female thread Male thread
Bore size Without switch With switch Without switch With switch MDC2
WF LF a’ wf LF
(mm) A B LX A B LX A B LX A B LX
ø32 17 25 64.5(74.5) 30.5(40.5) 14.5(24.5) 74.5 40.5 24.5 23.5 15 23 107.5(117.5) 30.5(40.5) 14.5(24.5) 117.5 40.5 24.5 MVC
ø40 17 25 74(84) 40(50) 24(34) 84 50 34 23.5 15 23 117(127) 40(50) 24(34) 127 50 34
ø50 18 29.5 76.5(86.5) 40.5(50.5) 17.5(27.5) 86.5 50.5 27.5 28.5 15 26.5 127.5(137.59) 40.5(50.5) 17.5(27.5) 137.5 50.5 27.5
ø63 18 31 78(88) 42(52) 16(26) 88 52 26 28.5 15 28 129(139) 42(52) 16(26) 139 52 26
SMG
ø80 20 35 91(101) 51(61) 21(31) 101 61 31 35.5 18 33 158(168) 51(61) 21(31) 168 61 31
MSD/
ø100 22 39 104.5(114.5) 60.5(70.5) 26.5(36.5) 115 70.5 36.5 35.5 18 35 167.5(177.5) 60.5(70.5) 26.5(36.5) 177.5 70.5 36.5
MSDG
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
Note: ø80: LB cannot be selected when B + stroke length is 72 or less.
FC*

STK

● Rod side flange (FA) SRL3

SSD2-D(L)-32 to 100 -FA
SRG3
Rod end male thread

FM A + (2 × stroke length) A + (2 × stroke length)

FL
SRM3
WF1 B + stroke length WF2 + stroke length a’ wf1 B + stroke length wf2 + stroke length a’
N 4-FD
FT
SRT3

MRL2
FH
FC

MRG2
Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt
SM‑25
ø80/ø100: Special bolt

ShkAbs
Code Common dimensions Female thread Male thread
Bore size Without switch With switch Without switch With switch FJ
FC FD FH FL FM FT N G WF1 WF2 a’ wf1 wf2
(mm) A B A B A B A B
ø32 34 5.5 48 56 65 8 34 M6×16 17 7 54.5(64.5) 30.5(40.5) 64.5 40.5 24 15 5 97.5(107.5) 30.5(40.5) 107.5 40.5 FK
ø40 40 5.5 54 62 72 8 40 M6×16 17 7 64(74) 40(50) 74 50 24 15 5 107(117) 40(50) 117 50
ø50 50 6.6 67 76 89 9 50 M8×20 18 8 66.5(76.5) 40.5(50.5) 76.5 50.5 29 15 5 117.5(127.5) 40.5(50.5) 127.5 50.5 Spd
ø63 60 9 80 92 108 9 60 M10×25 18 8 68(78) 42(52) 78 52 29 15 5 119(129) 42(52) 129 52 Contr
ø80 77 11 99 116 134 11 77 M12×40 20 10 81(91) 51(61) 91 61 36 18 8 148(158) 51(61) 158 61
ø100 94 11 117 136 154 11 94 M12×40 22 12 94.5(104.5) 60.5(70.5) 104.5 70.5 36 18 8 157.5(167.5) 60.5(70.5) 167.5 70.5 Ending
* Dimensions in ( ) are for stroke lengths of more than 50 mm.

881
 Compact cylinder double acting/double rod (large bore size)

SSD2-D Series
SCP*3 ● Bore size: ø125/ø140/ø160/ø180/ø200
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-D
Item
SSD2-DL (with switch)
SCA2 Bore size mm ø125 ø140 ø160 ø180 ø200
Actuation Double acting/double rod
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar) 0.7 (≈100 psi, 7 bar)
CKV2
Min. working pressure MPa 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar) 1.05 (≈150 psi, 10.5 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size Rc3/8 Rc1/2
+2.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 300 20 to 300
SSD Cushion With rubber cushion (standard)
Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
CAT Allowable absorbed energy J 6.52 6.52 7.78 12.4

MDC2
Stroke length
MVC Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø125
SMG ø140 10, 20, 30, 40, 50
ø160 75, 100, 125, 150 300 10
MSD/
MSDG ø180 175, 200, 250, 300
ø200
FC* *1: Total length dimension with custom stroke length is handled as custom stroke dedicated length.
*2: When using the type with switch, refer to the table below.
STK
Number of installed switches and min. stroke length (mm)
SRL3 Switch quantity 1 2 3 4 5
Switch model No.
SRG3 T* T* T* T* T*
Bore size (mm)
ø125 10 10 40 55 70
SRM3
ø140 10 10 40 55 70
SRT3 ø160 10 10 40 55 70
ø180 10 10 40 55 70
MRL2 ø200 10 10 40 55 70

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

882
 SSD2-D (Large bore size) Series
Specifications
Switch specifications SCP*3
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire CMK2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T0H/T0V T5H/T5V T8H/T8V
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT CMA2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SCM
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SCG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA SCA2
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
Indicator LED Without LED SCS2
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
CKV2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less CAV2/
COVP/N2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
SSD2

*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. SSG
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SSD
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire.
CAT

(Unit: kg) MDC2

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.)
Stroke length (mm) 10 20 30 40 50 75 100
MVC
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø125 4.64 4.74 4.98 5.08 5.32 5.42 5.66 5.76 6.00 6.10 6.85 6.95 7.70 7.80 SMG
ø140 6.62 6.73 7.00 7.11 7.38 7.49 7.77 7.88 8.15 8.26 9.00 9.11 10.07 10.18
MSD/
ø160 9.10 9.22 9.58 9.70 10.06 10.18 10.54 10.66 11.02 11.14 12.22 12.34 13.41 13.53
MSDG
ø180 13.12 13.27 13.62 13.77 14.12 14.27 14.62 14.77 15.12 15.27 16.36 16.51 17.61 17.76
ø200 16.09 16.27 16.65 16.83 17.21 17.39 17.77 17.95 18.33 18.51 19.73 19.91 21.13 21.31 FC*
Stroke length (mm) 125 150 175 200 250 300
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch STK
ø125 8.55 8.65 9.40 9.50 10.25 10.35 11.10 11.20 12.80 12.90 14.50 14.60
SRL3
ø140 11.02 11.13 11.87 11.98 12.72 12.83 13.57 13.68 15.27 15.38 16.97 17.08
ø160 14.61 14.73 15.81 15.93 17.01 17.13 18.21 18.33 20.61 20.73 23.01 23.13
SRG3
ø180 18.85 19.00 20.10 20.25 21.35 21.50 22.59 22.74 25.09 25.24 27.58 27.73
ø200 22.53 22.71 23.93 24.11 25.32 25.50 26.72 26.90 29.52 29.70 32.32 32.50
SRM3

SRT3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa MRL2
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ø125 Push/Pull 1.13 × 103 1.70 × 103 2.26 × 103 3.39 × 103 4.52 × 103 5.65 × 103 6.79 × 103 7.92 × 103 9.05 × 103 1.02 × 104 1.13 × 104 MRG2
ø140 Push/Pull 1.44 × 10 2.16 × 10 2.89 × 10 4.33 × 10 5.77 × 10 7.22 × 10 8.66 × 10 1.01 × 10 1.15 × 10 1.30 × 10 1.44 × 10
3 3 3 3 3 3 3 4 4 4 4

ø160 Push/Pull 1.88 × 103 2.83 × 103 3.77 × 103 5.65 × 103 7.54 × 103 9.42 × 103 1.13 × 104 1.32 × 104 - - - SM‑25
ø180 Push/Pull 2.39 × 103 3.58 × 103 4.77 × 103 7.16 × 103 9.54 × 103 1.19 × 104 1.43 × 104 1.67 × 104 - - -
ShkAbs
ø200 Push/Pull 3.02 × 103 4.52 × 103 6.03 × 103 9.05 × 103 1.21 × 104 1.51 × 104 1.81 × 104 2.11 × 104 - - -

FJ

FK
Spd
Contr

Ending

883
 SSD2-D (Large bore size) Series
SCP*3
How to order
Without switch (without magnet for switch)

CMK2 SSD2-D 125 50 N Code Description

With switch (built-in magnet for switch) A Bore size (mm)
CMA2 125 ø125
SSD2-DL 125 50 T0H R N
140 ø140
SCM 160 ø160
180 ø180
A Bore size
SCG 200 ø200
B Port thread
SCA2 B Port thread
Blank Rc thread
NN NPT thread (ø125 to ø160) (made-to-order product)
SCS2
GN G thread (ø125 to ø160) (made-to-order product)
CKV2 C Stroke length (mm)
C Stroke length
CAV2/ Refer to the stroke length table on the following page.
COVP/N2
D Switch model No.
SSD2 D Switch model No.

Contact
Lead wire Lead wire Voltage Lead
*1 Display
SSG Straight L-shaped AC DC Line
T0H* T0V* ● ● 1-color display

Reed
SSD T5H* T5V* ● ● Without indicator lamp 2-wire
T8H* T8V* ● ● 1-color display
CAT T1H* T1V* ●
2-wire
T2H* T2V* ● 1-color display
MDC2 T3H* T3V* ●
3-wire
T3PH* T3PV* ● 1-color display
MVC T2WH* T2WV* ●
Proximity

2-wire
T2YH* T2YV* ●
SMG 2-color display
T3WH* T3WV* ●
3-wire
MSD/ E Switch quantity T3YH* T3YV* ●
MSDG T2JH* T2JV* ● 1-color display off-delay 2-wire
T2YD* - ● 2-color display
FC* 2-wire
F Option T2YDT* - ● AC magnetic field

STK * Lead wire length

Blank 1 m (standard)
SRL3 3 3 m (option)
Precautions for model No. selection
5 5 m (option)
*1: S
‌ witches are shipped with the product. Contact CKD
SRG3
if assembling before shipment is necessary. E Switch quantity
R 1 on rod side
SRM3
H 1 on head side
[Example of model No.]
SRT3 SSD2-DL-125-50-T0H-R-N D 2

Model: Compact cylinder double acting/double rod

F Option
MRL2
● A Bore size : 125 mm Blank Rod end female thread
● B Port thread : Rc thread N Rod end male thread
MRG2 ● C Stroke length : 50 mm P4
● D Switch model No. : Reed T0H switch
P40
Specifications for rechargeable battery (made to order)
SM‑25 · Lead wire length 1 m
● E Switch quantity : 1 on rod side

ShkAbs● F Option : Rod end male thread

FJ How to order switch

SW T0H
FK
Spd
Contr
Switch model No.
(Item D above)
Ending

884
 SSD2-D (Large bore size) Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø125 ø140 ø160 ø180 ø200 CMK2
10 ● ● ● ● ●
20 ● ● ● ● ● CMA2
30 ● ● ● ● ●
40 ● ● ● ● ● SCM
Standard stroke length

50 ● ● ● ● ●
75 ● ● ● ● ● SCG
100 ● ● ● ● ●
125 ● ● ● ● ●
SCA2
150 ● ● ● ● ●
SCS2
175 ● ● ● ● ●
200 ● ● ● ● ●
CKV2
250 ● ● ● ● ●
300 ● ● ● ● ● CAV2/
COVP/N2
Min. stroke length (mm) *1 10
Max. stroke length (mm) 300 SSD2
Custom stroke length *2 In 1 mm increments
*1 : Refer to page 882 for the number of installed switches and the min. stroke length. SSG
*2 : Total length dimension with custom stroke length is handled as custom stroke dedicated length.
SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

885
 SSD2-D (Large bore size) Series
SCP*3
Internal structure and parts list (ø125 to 160)
● SSD2-DL-125 to 160 (double acting/double rod/with switch)
CMK2

CMA2 1 2 3 4 5 6 7 8 9 10 13 11 12

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
● SSD2-D-125 to 160 (double acting/double rod/without switch)
SSG

SSD 1 2 3 4 5 6 7 8 9 10 11 12

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3 No. Part name Material Remarks No. Part name Material Remarks
1 Rod packing Nitrile rubber 8 Piston rod ○
A Steel Industrial chrome plating

SRG3 2 Rod metal Aluminum die-casting Chromate 9 Piston Aluminum die-casting

3 C type snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber

SRM3 4 Metal gasket Nitrile rubber 11 Wear ring Polyacetal resin

5 Cushion rubber Urethane rubber 12 Piston rod ○
B Steel Industrial chrome plating

SRT3 6 Bush Oiles drymet 13 Magnet Rubber With switch only

7 Body Aluminum alloy Hard alumite
MRL2
Repair parts list
MRG2 Bore size (mm) Kit No. Repair parts No.
ø125 SSD2-D-125K
SM‑25 ø140 SSD2-D-140K 1 4 5 10 11

ø160 SSD2-D-160K
ShkAbs *1: Specify the kit No. when placing an order.

FJ

FK
Spd
Contr

Ending

886
 SSD2-D (Large bore size) Series
Internal structure and parts list
Internal structure and parts list (ø180, ø200) SCP*3
● SSD2-DL-180, 200 (double acting/double rod/with switch)
CMK2

1 2 3 4 5 7 6 13 9 12 10 8 11 14
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

● SSD2-D-180, 200 (double acting/double rod/without switch)

SSG

SSD
1 2 3 4 5 7 6 13 9 10 8 11 14
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
Parts list
No. Part name Material Remarks No. Part name Material Remarks SRG3
1 Rod packing Nitrile rubber 8 Piston Aluminum alloy
2 Rod metal Cast iron Paint 9 Piston packing Nitrile rubber SRM3
3 C type snap ring Steel Zinc phosphate 10 Wear ring Polyacetal resin
4 Gasket Nitrile rubber 11 Cover Cast iron Paint SRT3
5 Cushion rubber Urethane rubber 12 Magnet Rubber With switch only
6 Bush Oiles drymet 13 Piston rod A Steel Industrial chrome plating MRL2
7 Body Aluminum alloy Hard alumite 14 Piston rod B Steel Industrial chrome plating
MRG2
Repair parts list
Bore size (mm) Kit No. Repair parts No. SM‑25
ø180 SSD2-D-180K
ø200 SSD2-D-200K
1 4 5 9 10 ShkAbs

FJ

FK
Spd
Contr

Ending

887
 SSD2-D (Large bore size) Series
SCP*3
Dimensions (ø125 to ø160)
● SSD2-D(L)-125 to 160 (double acting/single rod) ● Rod end male thread
CMK2

CMA2
a’ WF
A + (2 × stroke length) c’
F
SCM N
WF B + stroke length WF + stroke length T
2-EE
L C D

øMM
a a b
SCG b
KK
(both ends)
SCA2

HD
SCS2 øMM kk’
FB
N
F

RD
Width across flats H
Width across flats M
CKV2
CAV2/
COVP/N2
FA 8-J
øK

M *2 Mounting hole
øI
SSD2 8-KA

SSG

SSD

CAT
Note: The positions for the left and right widths across flats are unspecified.
MDC2 Code Common dimensions with switch
Bore size (mm) A B C D EE F I J K KA KK (*1) L M MM N WF
MVC ø125 115 83 29 29 Rc3/8 142 12.5 20 spot face depth 13 190 M14 depth 25 M22 x 2.5 depth 30 (22.5) 72 30 35 114 16
ø140 115 83 27.5 27.5 Rc3/8 158 12.5 20 spot face depth 13 210 M14 depth 25 M22 x 2.5 depth 30 (22.5) 80 30 35 128 16
SMG ø160 125 91 30 30 Rc3/8 178 14.7 23 spot face depth 15.2 238 M16 depth 28 M24 x 3 depth 33 (24) 90 36 40 144 17

MSD/ Code T0H/V, T2H/V, T3H/V, T5/V T2YH/V, T3YH/V, T2JH/V T1H/V, T2YD
MSDG Bore size (mm) HD RD FA *2 FB HD RD FA *2 FB HD RD FA *2 FB
ø125 30 35 71.5(75) 44.5 28.5 33.5 77(80) 48 28.5 33.5 82.5(85.5) 48
FC* ø140 31.5 33.5 79.5(83) 44.5 30 32 85(88) 48 30 32 90.5(93.5) 48
ø160 34 39 89.5(93) 48.5 32.5 37.5 95(98) 52 32.5 37.5 100.5(103.5) 52
STK Code T2WH/V, T3WH/V T8H/V
Bore size (mm) HD RD FA *2 FB HD RD FA *2 FB
SRL3 ø125 31.5 36.5 71.5(75) 44.5 24 29 77(80) 48
ø140 33 35 79.5(83) 44.5 25.5 27.5 85(88) 48
SRG3
ø160 35.5 40.5 89.5(93) 48.5 28 33 95(98) 52
*1: Values in ( ) for KK dimensions indicate effective thread length on one side with 10 mm stroke length.
SRM3 *2: Dimensions in ( ) of FA are for the radial lead wire.
*3: The RD side can be identified by a mark on the port surface of the body.
SRT3
Dimensions of rod end male thread
MRL2 Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
MRG2 ø125 45 42 46 M30×1.5 30 35 18 13
ø140 45 42 46 M30×1.5 30 35 18 13
SM‑25 ø160 50 47 55 M36×1.5 36 40 21 14

ShkAbs

FJ

FK
Spd
Contr

Ending

888
 SSD2-D (Large bore size) Series
Dimensions
Dimensions (ø180 to ø200) SCP*3
● SSD2-D(L)-180, 200 (double acting/double rod) ● Rod end male thread
CMK2

F
A + (2 × stroke length)
50 14
CMA2
N 17 B + stroke length 17 + stroke length
2-Rc1/2 47
L C D
21 SCM

ø40
b a a b

2-M24 depth 33 SCG

*2
M36×1.5
Width across flats 55 SCA2
HD

ø40
N
F

RD Width across flats 36

SCS2
3
CKV2
CAV2/
øK Plain washer (4)

ø19.5
36 COVP/N2
FA 2 x 4-M22 depth 38
*1 SSD2
8-ø31.5 spot face depth 26
SSG
*1: 2×4-M22 through hole for 20 mm or less stroke length.
*2: 2-M24 depth 27 (ø180) and 2-M24 depth 29 (ø200) for 10 mm stroke length.
*3: The positions for the left and right widths across flats are unspecified. SSD

CAT

Code MDC2
A B C D F K L N
Bore size (mm)
ø180 136 102 32.5 32.5 204 270 104 162 MVC
ø200 143 109 33.5 33.5 226 300 110 182
Code T0H/V, T2H/V, T3H/V, T5H/V T2YH/V, T3YH/V, T2JH/V T1H/V, T2YD SMG
Bore size (mm) HD RD FA HD RD FA HD RD FA MSD/
ø180 39.5 43.5 99(102.5) 38.5 42.5 104.5(107.5) 38.5 42.5 110(113) MSDG
ø200 44.5 45.5 109.5(113) 43.5 44.5 115(118) 43.5 44.5 120.5(123.5)
Code T2WH/V, T3WH/V T8H/V
FC*
Bore size (mm) HD RD FA HD RD FA
ø180 41.5 45.5 99(102.5) 33.5 37.5 104.5(107.5)
STK
ø200 46.5 47.5 109.5(113) 38.5 39.5 115(118)
SRL3
*1: Dimensions in ( ) of FA are for the radial lead wire.
*2: The RD side can be identified by a mark on the port surface of the body.
SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

889
 Compact cylinder double acting/back to back

SSD2-B Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-B
Item
SSD2-BL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting/back to back
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
Stroke tolerance mm S1= +1.0
0 S2= +1.0
0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion None
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MDC2
Stroke length
MVC Bore size Max. stroke length Min. stroke length
Standard stroke length (mm)
(mm) (mm) (mm)
SMG ø12 5/10/15/20
30
ø16 25/30
MSD/
MSDG ø20 5/10/15/20/25
50
ø25 30/35/40/45/50
FC* ø32 5/10/15/20/25/30/
1
ø40 35/40/45/50/75/100
STK
ø50
10/15/20/25 100
ø63
SRL3 30/35/40/45/50
ø80
75/100
SRG3 ø100
*1: When using the type with switch, refer to the table of the min. stroke length with switch.
SRM3

SRT3 Min. stroke length with switch (2 switches)

Bore size
MRL2 T0H/V / T5H/V T2H/V / T3H/V
(mm)
ø12
MRG2 10(5)
ø16
ø20
SM‑25
ø25
ShkAbs ø32
5
ø40
5
FJ ø50
ø63
FK ø80
ø100
Spd
Contr *1: Less than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch is not available.
*2: Values in ( ) are for the type with 1 on rod side.

Ending

890
 SSD2-B Series
Specifications
Custom stroke length SCP*3
● SSD2-B Series
Standard products A+S1+S2 CMK2
Item
Standard stroke length body with spacer B+S1
Model No. Refer to How to order. CMA2
A spacer is added to the standard stroke length body to adjust the
Description SCM
stroke length in 1 mm increments.
Bore size Stroke range
SCG
12/16 1 to 29
Stroke range
20 to 25 1 to 49
SCA2
32 to 100 1 to 99
Model No.: SSD2-B-32-38-50 SCS2
Example of model No. A +2 mm spacer is added to the SSD2-B-32-40 standard cylinder
to create 38 mm stroke length. B + S1 dimension is 63 mm. CKV2
CAV2/
COVP/N2
Switch specifications (F type switch) SSD2
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire SSG
Item F2YH/ F3PH/F3PV F3YH/
F2S F3S F2H/F2V F3H/F3V
F2YV (made to order) F3YV SSD
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
CAT
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
MDC2
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green MVC
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) SMG
Leakage current 1 mA or less 10 μA or less 1mA or less 10 μA or less
Weight g 1 m:10 3 m:29
MSD/
MSDG

FC*
Switch specifications (T type switch)
STK
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
SRL3
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT
For programmable SRG3
Dedicated for For programmable For programmable For programmable controller, For programmable Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
SRM3
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
SRT3
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
MRL2
Indicator LED Without LED
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) indicator lamp (Lit when ON)
(Lit when ON) MRG2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA SM‑25
current ≤ 2 mA at 200 VAC less

1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61

Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 ShkAbs
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272

*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. FJ

*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. FK
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. Spd
*5 : The F type switch uses a bend-resistant lead wire.
Contr

Ending

891
 SSD2-B Series
SCP*3
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
CMK2
ø12 36 86 44 86 53 95 61 103 70 112 72 114 - - - - - - - - - - - -
ø16 48 104 59 104 69 114 80 125 91 136 102 147 - - - - - - - - - - - -
CMA2
ø20 63 118 75 150 88 163 101 176 113 188 126 201 139 214 152 227 165 240 203 278 - - - -
ø25 87 178 102 193 118 209 134 225 160 241 165 256 181 272 197 288 213 304 228 319 - - - -
SCM
ø32 122 236 144 258 166 280 188 302 209 323 231 345 253 367 275 389 297 411 318 432 494 542 604 652
ø40 183 326 210 353 236 379 263 406 290 433 316 459 342 485 369 512 395 538 472 565 646 695 776 825
SCG ø50 - - 341 535 383 577 425 619 467 661 510 704 552 746 594 788 636 830 678 872 1025 1082 1235 1292
ø63 - - 507 786 562 841 617 896 672 951 727 1006 782 1061 838 1117 893 1172 948 1227 1438 1502 1713 1777
SCA2 ø80 - - 928 1341 1015 1428 1101 1514 1188 1601 1274 1887 1361 1774 1448 1861 1535 1948 1621 2034 2401 2467 2833 2899
ø100 - - 1433 2000 1547 2114 1660 2227 1774 2341 1888 2455 2002 2569 2115 2682 2229 2796 2343 2910 3406 3478 3973 4045
SCS2

CKV2
Hexagon socket head cap screw weight (Unit: g)
CAV2/ Stroke length (mm) Cylinder 2 stroke length
COVP/N2 Connector
Bore size (mm) 5 10 15 20 25 30 35 40 45 50 75 100
SSD2 ø12 3.2 4 4.8 5.6 6.4 7.2 - - - - - - 5.6
ø16 3.2 2.4 2.4 2.4 2.4 2.4 - - - - - - 5.6
ø20 8 11 14 16 19 22 25 28 30 33 - - 14
SSG
ø25 8 11 14 16 19 22 25 28 30 33 - - 14
ø32 8 11 14 16 19 22 25 28 30 33 47 61 14
SSD
ø40 8 11 14 16 19 22 25 28 30 33 47 61 14
ø50 - 16.7 20.6 24.5 28.5 32.4 36.3 40.3 44.2 48.1 67.8 87.5 28.8
CAT
ø63 - 40.8 47.2 53.6 60 66.4 72.8 79.2 85.6 92 124 156 60
ø80 - 60 72 84 96 108 120 132 144 156 216 276 116
MDC2 ø100 - 60 72 84 96 108 120 132 144 156 216 276 116

MVC

SMG (1) Cylinder 1

(2) Cylinder 2
MSD/ (3) ‌Hexagon socket
MSDG head cap screw

FC* (4) Connector

(1) (4) (3) (2)

STK
Total cylinder weight
Total weight = weight of cylinder 1 + weight of cylinder 2 + (hexagon socket head cap screw + connector).
SRL3 [Example: Total weight of SSD-B-25-30-N-10-N]
Weight of ø25 with 30 mm stroke length:····(1)
SRG3 Weight of ø25 with 10 mm stroke length:····(2)
Weight of hexagon socket head cap screw for ø25 cylinder 2 with 10 mm stroke length + weight of connector: ··· (3)
SRM3
Total weight = (1) + (2) + (3) = 165 g + 102 g + 11 g + 14 g = 292 g

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

892
 SSD2-B Series
Specifications
Theoretical thrust table (Unit: N)
SCP*3
Bore size Operating Working pressure MPa
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 CMK2
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102
ø12
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8 CMA2
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102 SCM
Push - 31.4 47.1 62.8 94.2 1.26×10 1.57×10 1.88×10 2.20×10 2.51×10 2.83×10 3.14×10
2 2 2 2 2 2 2
ø20 SCG
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 49.1 73.6 98.2 1.47×10 1.96×10 2.45×10 2.95×10 3.44×10 3.93×10 4.42×10 4.91×10
2 2 2 2 2 2 2 2
ø25 SCA2
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32 SCS2
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 CKV2
ø40
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 CAV2/
ø50 COVP/N2
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 1.56×10 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
2
SSD2
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 SSG
ø80
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103 SSD
ø100
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

893
 SSD2-B Series
SCP*3
How to order Cylinder 1 Cylinder 2 Code Description
Without switch (without magnet for switch) stroke length stroke length A Model No.
S1 S2
CMK2 SSD2-B 12 5 N 10 N I SSD2-B Double acting/back to back
SSD2-BL Double acting/back to back/with switch
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-BL 12 5 T0H R N 10 T0H R N I
12 ø12
SCM 16 ø16
A Model No. Cylinder 1 Cylinder 2 20 ø20
25 ø25
SCG B Bore
32 ø32
size
F Switch quantity F Switch quantity 40 ø40
SCA2 50 ø50
63 ø63
SCS2 C Port thread 80 ø80
G Option G Option 100 ø100
CKV2 *3 C Port thread
*5
CAV2/ Blank Rc thread
H Accessory
COVP/N2 NN NPT thread (ø32 and over) (made-to-order product)
*6
GN G thread (ø32 and over) (made-to-order product)
SSD2 D Stroke length (mm)
D Stroke length
SSG Refer to the stroke length table on the following page.
E Switch model No.
E Switch model No.
SSD Lead wire Lead wire Voltage Lead Bore size

Contact
*2/*7/*8 Display
Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
- F2S* ● 2-wire ● ●
CAT Precautions for model No. selection ● 1-color 3-wire ● ●
- F3S*
*1 : When two cylinders are connected, the connection is from Cylinder 2 side. F2H* F2V* ● display 2-wire ● ●
MDC2
Proximity

(Refer to dimensions)
F3H* F3V* ● 3-wire ● ●
Determine cylinders 1 and 2 with the mounting method in mind.
*2 : The T2YD* switch cannot be installed on ø12 and ø16. In addition, T8* 1 color display (PNP
MVC switch cannot be installed on ø12 to ø32. F3PH* F3PV* ● 3-wire ● ●
output) (custom)
*3 : Piston rod of ø12 to ø25 is stainless steel as standard.
C type snap ring is stainless steel instead of steel. F2YH* F2YV* ● 2-wire ● ●
SMG 2-color display
The rod end male thread nut is stainless steel. F3YH* F3YV* ● 3-wire ● ●
*4 : Refer to pages 750 and 751 for combinations of variations/options. T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
MSD/ *5 : Option “N” will be inscribed on both S1 and S2 sides, but for all other
Reed

T5H* T5V* ● ● no indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●

MSDG option codes, they will only be written on S2.
*6 : Two units are included when an accessory is selected. One unit each is T8H* T8V* ● ● 1-color display ● ● ● ● ●
included when “IY” is selected. T1H* T1V* ● ● ● ● ● ● ● ● ●
FC* *7 : The F type switch with L type lead wire on ø20 models cannot be selected 1-color 2-wire
T2H* T2V* ● ● ● ● ● ● ● ● ● ● ●
on stroke lengths of 15 mm or under. display
*8 : Switches are shipped with the product. Contact CKD if assembling before T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
STK shipment is necessary. 1-color display 3-wire
*9 : When S1 stroke length is at or below that in the table below, the length of T3PH* T3PV* ● ● ● ● ● ● ● ● ● ● ●
(PNP output)
the usable mounting bolts will differ from the standard and so contact CKD.
SRL3
Proximity

T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●
Without switch With switch 2-wire
Bore size T2YH* T2YV* ● 2-color ● ● ● ● ● ● ● ●
S1 Stroke length
SRG3 T3WH* T3WV* ● display ● ● ● ● ● ● ● ● ● ●
ø20 10 or less - 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
ø25 5 or less -
SRM3 ø32 5 or less - T2YD* - ● 2-color display (AC ● ● ● ● ● ● ● ●
2-wire
ø50 5 or less - T2YDT* - ● magnetic field) ● ● ● ● ● ● ● ●
ø63 15 or less 5 or less 1-color display
SRT3 T2JH* T2JV* ●
off-delay
2-wire ● ● ● ● ● ● ● ●
ø80 20 or less 10 or less
ø100 10 or less - * Lead wire length
MRL2 *10 : F type switch cannot be selected. Blank 1 m (standard)
3 3 m (option)
[Example of model No.]
MRG2 5 5 m (option) *9
SSD2-BL-12-5-T0H-R-N-10-T0H-R-N
F Switch quantity
SM‑25 Model: Compact cylinder, back to back R 1 on rod side
●
B Bore size : ø12 mm
H 1 on head side
ShkAbs ●
C Port thread : Rc thread
D 2
●
D Stroke length S1 : 5 mm
●
E Switch model No. : ‌Reed switch T0H, G Option
FJ lead wire 1 m Cylinder 1 stroke length 5 mm (S1) Blank Rod end female thread
Cylinder 1
●
F Switch quantity : 1 on rod side + Cylinder 2 stroke length 10 mm (S2) N Rod end male thread
FK ●
C Option : Rod end male thread Total stroke 15 mm S1+S2
M *3 Piston rod material (stainless steel)
●
D Stroke length S2 : 10 mm Cylinder 1
S1
Cylinder 2
S2 H Accessory (available when rod end male thread “N” is selected)
Spd ● E Switch model No. : ‌Reed switch T0H,
Contr lead wire 1 m I Rod eye
Cylinder 2 Y Rod clevis (pin and snap ring included)
●
F Switch quantity : 1 on rod side
Ending ●
G Option : Rod end male thread

894
 SSD2-B Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : ‌Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 890 for the min. stroke length with switch.
*2 : ‌The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length. SSD

CAT

How to order switch MDC2

SW T0H MVC

SMG
Switch model No.
MSD/
(Item E on page 894) MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

895
 SSD2-B Series
SCP*3
Internal structure and parts list
● SSD2-BL-12 to 25 (double acting/back to back/with switch) ● SSD2-BL-32 to 50 (double acting/back to back/with switch)
CMK2
1 2 3 4 5 6 7 8 10 9 11 1 2 3 4 5 6 10 9 11
CMA2

SCM

SCG

SCA2 13 12

SCS2
7 8 13 12
CKV2
CAV2/
COVP/N2
● SSD2-B-12 to 25 (double acting/back to back) ● SSD2-B-32 to 50 (double acting/back to back)
SSD2
1 2 3 4 5 6 9 10 11 1 2 3 4 5 6 9 10 11
SSG

SSD

CAT

MDC2 13 12

MVC
13 12 7
SMG
Over 50 st
MSD/
MSDG

FC* No. Part name Material Remarks No. Part name Material Remarks
ø12 to ø25: Stainless steel ø16 to ø50 8 Magnet Plastic
STK 1 Piston rod
ø32 to ø50: Steel Industrial chrome plating 9 Piston Aluminum alloy Chromate
2 C type snap ring Steel Zinc phosphate 10 Piston packing Nitrile rubber
SRL3 3 Rod metal Special aluminum Alumite ø12 to 25: Stainless steel
11 Cover ø32 to ø50: Alumite
4 Rod metal gasket Nitrile rubber ø32 to ø50: Aluminum alloy
SRG3 5 Body Aluminum alloy Hard alumite 12 Hexagon socket head cap screw Steel Black finish
6 Rod packing Nitrile rubber 13 Connector Steel Zinc chromate
SRM3 7 Spacer Aluminum alloy Chromate

SRT3
Repair parts list SSD2-B application examples
MRL2 Bore size (mm) Kit No. Repair parts No.
When the same stroke lengths When different stroke lengths
ø12 SSD2-B-12K
are combined, 3 positions are are combined, 4 positions are
MRG2 ø16 SSD2-B-16K possible. possible.
ø20 SSD2-B-20K
SM‑25 ø25 SSD2-B-25K 4 6 10 3 2 1 Reference 4 3 2 1 Reference
ø32 SSD2-B-32K
ShkAbs ø40 SSD2-B-40K
ø50 SSD2-B-50K
FJ

FK
Spd
Contr

Ending

896
 SSD2-B Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-BL-63 to 100 (double acting/back to back/with switch)
CMK2

1 2 3 4 6 5 12 7 8 10 9 11
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

14 13 SSD2

SSG

● SSD2-B-63 to 100 (double acting/back to back) SSD

CAT
1 2 3 4 6 5 12 9 10 11 7

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK
Over 50 st
SRL3
14 13

SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod Steel Industrial chrome plating 8 Magnet Plastic
2 C type snap ring Steel Zinc phosphate 9 Piston Aluminum alloy Chromate SRT3
3 Rod metal Aluminum alloy Chromate 10 Piston packing Nitrile rubber
4 Rod metal gasket Nitrile rubber 11 Cover Aluminum alloy Alumite MRL2
5 Body Aluminum alloy Hard alumite 12 Bush Oiles drymet *1
6 Rod packing Nitrile rubber 13 Hexagon socket head cap screw Steel Black finish MRG2
7 Spacer Aluminum alloy Chromate 14 Connector Steel Zinc chromate
*1: Material is steel for copper and PTFE free specifications. SM‑25

Repair parts list ShkAbs

Bore size (mm) Kit No. Repair parts No.
ø63 SSD2-B-63K FJ
ø80 SSD2-B-80K 4 6 10

ø100 SSD2-B-100K FK
Spd
Contr

Ending

897
 SSD2-B Series
SCP*3
Dimensions
● SSD2-BL-12/16 (with switch) ● Rod end male thread
CMK2
A+S1+S2 a’ wf
WF B+S1 B+S2 WF c’
CMA2 F
C D D
T
4-J Cylinder 1 Cylinder 2 C 4-EE
N
Mounting hole KK HD RD

øMM
SCM

øMM

øMM
SCG
FB

kk’
N
F

SCA2 Width across

FA

flats M
Width across flats H
SCS2
4-KA
M RD
øK

HD
CKV2
CAV2/
COVP/N2 ● SSD2-BL-25, 32 (with switch)

SSD2 A+S1+S2
F WF B+S1 B+S2 WF
SSG 4-J N C D D Cylinder 2 C 4-EE
Cylinder 1
Mounting hole RD
HD
KK
SSD
øMM

øMM
CAT
FB
N
F

MDC2

MVC

SMG
øK

M RD 4-KA HD
FA
MSD/
MSDG

FC*
Code Common dimensions with switch
Bore size (mm) A *1 B *1 C D EE F FA *4 FB J K KA KK M MM N WF
STK
ø12 51 22 5.5 5.5 M5 25 13(16.5) 4.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 51 22 5.5 5.5 M5 29 15(18.5) 4.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
SRL3 ø20 68 29.5 8 5.5 M5 36 18.5(22) 12.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 75 32.5 11 6 M5 40 20.5(24) 13.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
SRG3 Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Proximity F2S/F3S
dimensions T5H/T5V *6 T3H/T3V *6 T3WH/T3WV *6 F2YH/F2YV, F3YH/F3YV
SRM3 Bore size (mm) HD RD HD RD HD RD HD RD HD RD
ø12 1.5 1.5 1.5 1.5 3.5 3.5
SRT3 ø16 0 4 0 4.5 1 6
ø20 3 7.5 3 7.5 5 9.5 7.5 12 6.5 11
MRL2 ø25 4 9.5 4 9.5 6 11.5 8.5 14 7.5 13
*1 : To calculate A + S1 + S2, B + S1 or B + S2 when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke length)
to the stroke length.
MRG2 (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
SM‑25 *3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
ShkAbs *6 : Only F type switch is available for the ø20 or ø25 piping port surface.

FJ
● Rod end male thread
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

898
 SSD2-B Series
Double acting/back to back
Dimensions SCP*3
● SSD2-B-12/16 (without switch) ● Rod end male thread
CMK2

a’ wf
F A+S1+S2 4-EE
c’
CMA2
4-J N WF B+S1 B+S2 WF T
Cylinder 1 D D Cylinder 2 C
Mounting hole KK C SCM

øMM
øMM
SCG
øMM
N
F

SCA2
kk’
Width across
flats M SCS2
Width across flats H
M
øK

4-KA
CKV2
CAV2/
● SSD2-B-20, 25 (without switch) COVP/N2

SSD2
F A+S1+S2

N WF B+S1 B+S2 WF SSG

4-J Cylinder 1
C D D Cylinder 2 C 4-EE
Mounting hole KK SSD

øMM
CAT
øMM

MDC2
N
F

MVC

SMG
M 4-KA
øK

MSD/
MSDG

FC*
Code Dimensions without switch and common dimensions
Bore size (mm) A *1 B *1 C D EE F J K KA KK M MM N WF STK
ø12 41 17 5.5 5.5 M5 25 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 41 17 5.5 5.5 M5 29 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5 SRL3
ø20 48 19.5 8 5.5 M5 36 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 55 22.5 11 6 M5 40 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5 SRG3

● Rod end male thread SRM3

Code
a’ c’ H kk’ M MM T wf SRT3
Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
MRL2
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
MRG2
*1 : To calculate A + S1 + S2, B + S1 or B + S2 when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke length)
to the stroke length. SM‑25
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049. ShkAbs

FJ

FK
Spd
Contr

Ending

899
 SSD2-B Series
SCP*3
Dimensions
● SSD2-BL-32 to 100 (with switch) ● Rod end male thread
CMK2
A+S1+S2
F B+S1 B+S2 a’ wf
WF WF
CMA2 4-J N C D D C
c’
T
Mounting hole H HD 4-EE
Cylinder 1 Cylinder 2 RD
SCM

øMM
KK
O

SCG øMM

øMM
G

FB
N
F

SCA2 kk’
Width across
flats M
SCS2 M
Width across flats H
øK

RD 4-KA HD
FA
CKV2
● SSD2-B-32 to 100 (without switch)
CAV2/
COVP/N2 A+S1+S2
F WF B+S1 B+S2 WF
SSD2 4-J N C D D C
Mounting hole H 4-EE
Cylinder 1 Cylinder 2
SSG
KK
O

SSD
øMM

øMM
G

N
F

CAT

MDC2 M
øK

4-KA

MVC Code Without switch Common dimensions with switch

Bore size (mm) A *1, *6 B *1, *6 A *1 B *1 C *8 D *8 EE F FA *4 FB G H J K
SMG ø32 60(80) 23(33) 80 33 8(10) 8(5.5) Rc1/8 *7
45 23(26.5) 20.5 49.5 12.5 9 spot face depth 5.5 60
ø40 73(93) 29.5(39.5) 93 39.5 12(11.5) 8.5(8) Rc1/8 52 26.5(30) 27.5 57 15 9 spot face depth 5.5 69
MSD/
ø50 77(97) 30.5(40.5) 97 40.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 11 spot face depth 6.5 86
MSDG
ø63 88(108) 36(46) 108 46 13 11 Rc1/4 77 39(42.5) 28.5 84 23 14 spot face depth 9 103
FC* ø80 107(127) 43.5(53.5) 127 53.5 16 13 Rc3/8 98 49.5(53) 28.5 104 31 17.5 spot face depth 11 132
ø100 130(150) 53(63) 150 63 23 15 Rc3/8 117 59(62.5) 28.5 123.5 38 17.5 spot face depth 11 156
STK Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV,
Code Common dimensions with switch
T5H/T5V T3H/T3V T3WH T3WV
SRL3 Bore size (mm) KA KK M MM N O WF HD *2 RD *2 HD *2 RD *2 HD RD
ø32 M6 depth 11 M8 depth 13 14 16 34 4.5 7 4 9.5 4 9.5 6 11.5
SRG3 ø40 M6 depth 11 M8 depth 13 14 16 40 5 7 7 12 7 12 8.5 13.5
ø50 M8 depth 13 M10 depth 15 17 20 50 7 8 7.5 12.5 7.5 12.5 9 14
SRM3 ø63 M10 depth 25 M10 depth 15 17 20 60 7 8 12.5 13 12.5 13 14 14.5
ø80 M12 depth 28 M16 depth 21 22 25 77 6 10 17.5 15.5 17.5 15.5 19 17
SRT3 ø100 M12 depth 28 M20 depth 27 27 30 94 6.5 12 23 19.5 23 19.5 24.5 21
*1 : To calculate A + S1 + S2, B + S1 or B + S2 when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke length)
MRL2 to the stroke length. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
MRG2 *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
SM‑25 *7 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*8 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
ShkAbs
● Rod end male thread
Code
FJ a’ c’ H kk’ M MM T wf
Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5
FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
Spd ø50 28.5 26 27 M18×1.5 17 20 11 5
Contr ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending ø100 35.5 32.5 41 M26×1.5 27 30 16 8

900
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

901
 Compact cylinder double acting/two-stage

SSD2-W Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2

CMA2

SCM
Specifications
SCG SSD2-W
Item
SSD2-WL (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting/two-stage
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar) (*1)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 (*2) Rc1/4 Rc3/8
Stroke tolerance mm S1= +1.0
0
0
S2=-1.5
SSG Working piston speed mm/s 50 to 500 50 to 300
Cushion None
SSD Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT *1: The max. working pressure is 0.5 MPa when S1 and S2 are the same value.
*2: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
MDC2
Stroke length Min. stroke length with switch (2 switches)
MVC Bore size Standard stroke length Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) (mm) length (mm) length (mm) (mm)
SMG ø12 5/10/15/20 ø12
30 10(5)
ø16 25/30 ø16
MSD/ ø20
MSDG ø20
ø25
ø25 5/10/15/20/25
50 ø32
FC* ø32 30/35/40/45/50 5
1 ø40
5
ø40 ø50
STK ø50 ø63
ø63 10/15/20/25 ø80
SRL3 50 ø100
ø80 30/35/40/45/50
*1: Less
‌ than 10 mm with the 2-color display, off-delay,
ø100
SRG3 AC magnetic field proof, T1* or T8* switch is not available.
*1: ‌The custom stroke length is available in 1 mm increments. However, the total length *2: Values in ( ) are for the type with 1 on rod side.
is the same as that of the next longer standard stroke length.
SRM3 *2: When using the type with switch, refer to the table on the right.

SRT3
Custom stroke length
MRL2 ● SSD2-W Series
Standard products A + stroke length
MRG2 Item
Standard stroke length body with spacer B + stroke length
Model No. Refer to How to order.
SM‑25 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
ShkAbs
Bore size Stroke range
12/16 1 to 29
FJ Stroke range
20 to 25 1 to 49
FK 32 to 100 1 to 99
Model No.: SSD2-W-32-38
Spd Example of model No. A +2 mm spacer is added to the SSD2-W-32-40 standard cylinder
Contr
to create 38 mm stroke length. B + stroke length is 63mm.
Ending

902
 SSD2-W Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV F3YH/
F2S F3S F2H/F2V F3H/F3V
F2YV (made to order) F3YV CMA2
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
SCA2
LED Yellow LED Red/green Yellow LED Red/green
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) SCS2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 CKV2

Switch specifications (T type switch) CAV2/

● 1-color/2-color display/for AC magnetic field proof COVP/N2

Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire SSD2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T0H/T0V T5H/T5V T8H/T8V
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT SSG
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SSD
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - CAT
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
MDC2
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
Indicator LED Without LED MVC
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
SMG
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA
current ≤ 2 mA at 200 VAC less MSD/
MSDG
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 FC*
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272

*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. STK
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SRL3
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire.
SRG3
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
SRM3
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 37 87 45 87 54 96 62 104 71 113 73 115 - - - - - - - - - - - -
SRT3
ø16 49 105 60 105 70 115 81 126 92 137 103 148 - - - - - - - - - - - -
ø20 65 120 77 152 90 165 103 178 115 190 128 203 141 216 154 229 167 242 205 280 - - - - MRL2
ø25 90 181 105 196 121 212 137 228 163 244 168 259 184 275 200 291 216 307 231 322 - - - -
ø32 126 240 148 262 170 284 192 306 213 327 235 349 257 371 279 393 301 415 322 436 494 542 604 652 MRG2
ø40 189 332 216 359 242 385 269 412 296 439 322 465 348 491 375 518 401 544 478 571 646 695 776 825
ø50 - - 354 548 396 590 438 632 480 674 523 717 565 759 607 801 649 843 691 885 1038 1095 1248 1305 SM‑25
ø63 - - 543 822 598 877 653 932 708 987 763 1042 818 1097 874 1153 929 1208 984 1263 1474 1538 1749 1813
ø80 - - 1002 1415 1089 1502 1175 1588 1262 1675 1348 1961 1435 1848 1522 1935 1609 2022 1695 2108 2475 2541 2907 2973 ShkAbs
ø100 - - 1558 2125 1672 2239 1785 2352 1899 2466 2013 2580 2127 2694 2240 2807 2354 2921 2468 3035 3531 3603 4098 4170
Total cylinder weight FJ
Total weight = weight of cylinder 1 + weight of cylinder 2.
[Example: Total weight of SSD-W-25-30-N-10-N] FK
Weight of ø25 with 30 mm stroke length:····(1)
Weight of ø25 with 10 mm stroke length:····(2) Spd
Total weight = (1) + (2) = 168 g + 105 g = 273 g
Contr

Ending

903
 SSD2-W Series
SCP*3
How to order Code Description
Total stroke 1st stage stroke length
Without switch (without magnet for switch)
S1 S2
A Model No.
CMK2 SSD2-W 12 30 N 5 M I SSD2-W Double acting/two-stage
SSD2-WL Double acting/two-stage/with switch
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-WL 12 30 T0H R N 5 T0H R M I
12 ø12
SCM 16 ø16
A Model No. Cylinder 1 Cylinder 2 20 ø20
25 ø25
SCG B Bore size
32 ø32
F Switch quantity F Switch quantity 40 ø40
SCA2 50 ø50
63 ø63
SCS2 C Port thread 80 ø80
G Option 1 H Option 2 100 ø100
CKV2 *2 *2
C Port thread
CAV2/ Blank Rc thread
I Accessory
COVP/N2 NN NPT thread (ø32 and over) (made-to-order product)
GN G thread (ø32 and over) (made-to-order product)
SSD2 D Stroke length (mm)
D Stroke length
SSG Refer to the stroke length table on the following page.
E Switch model No.
E Switch model No.
SSD Lead wire Lead wire Voltage Lead Bore size

Contact
*1 Display
*4 Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63 80 100
CAT - F2S* ● 2-wire ● ●
- F3S* ● 1-color 3-wire ● ●
F2H* F2V* ● display 2-wire ● ●
MDC2
Proximity

F3H* F3V* ● 3-wire ● ●

1 color display (PNP
MVC F3PH* F3PV* ●
output) (custom)
3-wire ● ●

F2YH* F2YV* ● 2-wire ● ●

SMG 2-color display
F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ● ● ●
MSD/
Reed

T5H* T5V* ● ● no indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ●

MSDG Precautions for model No. selection T8H* T8V* ● ● 1-color display ● ● ● ● ●
FC* *1 : T2YD* switch cannot be installed on ø12 and ø16. In T1H* T1V* ●
1-color 2-wire
● ● ● ● ● ● ● ●
addition, T8* switch cannot be installed on ø12 to T2H* T2V* ● ● ● ● ● ● ● ● ● ● ●
ø32. display
STK T3H* T3V* ● ● ● ● ● ● ● ● ● ● ●
*2 : Piston rod of ø12 to ø25 is stainless steel as
standard. C type snap ring is stainless steel instead 1-color display 3-wire
T3PH* T3PV* ● ● ● ● ● ● ● ● ● ● ●
of steel. The rod end male thread nut is stainless (PNP output)
SRL3
Proximity

steel. T2WH* T2WV* ● ● ● ● ● ● ● ● ● ● ●

*3 : Refer to pages 750 and 751 for combinations 2-wire
T2YH* T2YV* ● 2-color ● ● ● ● ● ● ● ●
SRG3 of variations/options.
T3WH* T3WV* ● display ● ● ● ● ● ● ● ● ● ●
*4 : Switches are shipped with the product. Contact CKD if 3-wire
assembling before shipment is necessary. T3YH* T3YV* ● ● ● ● ● ● ● ● ●
SRM3 *5 : F type switch cannot be selected. T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
T2YDT* - ● (AC magnetic field) ● ● ● ● ● ● ● ●
SRT3 [Example of model No.] T2JH* T2JV* ●
1-color display 2-wire ● ● ● ● ● ● ● ●
off-delay
SSD2-WL-12-30-T0H-R-N-5-T0H-R-I * Lead wire length
MRL2 Model: Compact cylinder two-stage
Blank 1 m (standard)
●
B Bore size : ø12 mm 3 3 m (option)
MRG2 ●C Port thread : Rc thread 5 5 m (option) *5
●
D Total stroke length S1 : 30 mm
F Switch quantity
SM‑25 ●
E Switch model No. : ‌Reed switch T0H,
lead wire 1 m R 1 on rod side
Cylinder 1
ShkAbs ● F Switch quantity : 1 on rod side H 1 on head side
●
G Option 1 : Rod end male thread D 2

FJ ●
D 1st stage stroke length S2 : 5 mm 1st stage stroke length 5 mm (S2)
+ 2nd stage stroke length 25 mm
G Option 1
2nd stage stroke length : 25 mm Blank Rod end female thread
●
Total stroke length 30 mm (S1)
E Switch model No. : ‌Reed switch T0H,
N Rod end male thread
FK lead wire 1 m Cylinder 2 S1 S2
Option 2 *2
Spd ●
H
F Switch quantity : 1 on rod side
Contr ●I Accessory : Rod eye M Piston rod material (stainless steel)
I Accessory (available when rod end male thread “N” is selected)
Ending I Rod eye
Y Rod clevis (pin and snap ring included)
904
 SSD2-W Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● CMA2
Standard stroke length

15 ● ● ● ● ● ● ● ● ● ●
20 ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
Min. stroke length (mm) 1
CKV2
Max. stroke length (mm) 30 50
Custom stroke length *1 In 1 mm increments CAV2/
COVP/N2
*1 : ‌Less than 5 mm with 1-color display switch and less than 10 mm with the 2-color display, off-delay, AC magnetic field
proof, T1* or T8* switch are not available. SSD2
Refer to page 902 for the number of installed switches and the min. stroke length.
*2 : ‌The total length is the same as that of the next longer standard stroke length.
SSG

SSD

How to order switch CAT

SW T0H
MDC2

MVC
Switch model No.
(Item E on page 904) SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

905
 SSD2-W Series
SCP*3
Internal structure and parts list
● SSD2-WL-12 to 50 (double acting/two-stage/with switch) ● SSD2-WL-63 to 100 (double acting/two-stage/with switch)
CMK2
1 2 4 3 5 6 7 8 12 13 9 10 11 1 2 3 4 6 15 5 12 13 7 8 9 10 11

CMA2

SCM

SCG

SCA2
14

SCS2

CKV2 14

CAV2/
COVP/N2 ● SSD2-W-12 to 50 (double acting/two-stage) ● SSD2-W-63 to 100 (double acting/two-stage)

SSD2 1 2 4 3 5 6 12 13 9 10 11 1 2 3 4 6 15 5 12 13 9 10 11

SSG

SSD

CAT

MDC2 14

MVC
14
SMG
MSD/ No. Part name Material Remarks No. Part name Material Remarks
MSDG ø12 to ø25: Stainless steel ø16 to ø100 9 Piston Aluminum alloy Chromate
1 Piston rod
ø32 to ø100: Steel Industrial chrome plating 10 Piston packing Nitrile rubber
FC* 2 C type snap ring Steel Zinc phosphate ø12 to 25: Stainless steel ø32 to ø100
11 Cover
ø12 to ø50: Special aluminum ø12 to ø50: Alumite ø32 to ø100: Aluminum alloy Alumite
STK 3 Rod metal
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 12 Plug Stainless steel
4 Rod metal gasket Nitrile rubber 13 Stainless steel mesh Stainless steel
SRL3 5 Body Aluminum alloy Hard alumite 14 Hexagon socket head cap screw Steel Black finish
6 Rod packing Nitrile rubber 15 Bush Oiles drymet
SRG3 7 Spacer Aluminum alloy Chromate
8 Magnet Plastic
SRM3

SRT3 Repair parts list SSD2-W application examples

Bore size (mm) Kit No. Repair parts No.
Pressure setting: P2 > P1 It may not be P2 = P1 depending
MRL2 ø12 SSD2-W-12K ● 1st stage push on the load direction. When using
ø16 SSD2-W-16K Keeping port 4 pressurized, a single acting cylinder with free
MRG2 ø20 SSD2-W-20K pressurize port 1. fall load, ports 2 and 4 in the upper
ø25 SSD2-W-25K ● 2nd stage push figure and ports 2 and 3 in the
SM‑25 ø32 SSD2-W-32K Keeping port 1 pressurized, lower figure are breathing holes.
4 6 10
ø40 SSD2-W-40K pressurize port 3. Port 2, which basically needs no piping
as a rule, is plugged with a filter.
ShkAbs ø50 SSD2-W-50K
ø63 SSD2-W-63K
4
FJ ø80 SSD2-W-80K 4 32 1
ø100 SSD2-W-100K 2
FK 3 2 1

Spd
Contr P2 P1 3
2

Ending

906
 SSD2-W Series
Dimensions
Dimensions SCP*3
● SSD2-WL-12 to 25 (with switch T0H/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2
A+S1+S2 a’ wf
ø12/ø16 c’
WF
B1+S1 B2+S2 T CMA2
P C 3-EE C C Breathing hole D
F

øMM
8-J N PP HD1 HD2 SCM
KK
SCG
FB

kk’
øMM
SCA2
N
F

Width across
flats M
FA

Width across flats H

SCS2
Cylinder 1
FB
RD1 8-KA RD2 Cylinder 2

øI
øK M CKV2
FA
CAV2/
A+S1+S2 COVP/N2
ø20/ø25 WF
B1+S1 B2+S2
F
PP P C 3-EE C C Breathing hole D SSD2
8-J N HD2
HD1
KK
SSG

SSD
øMM
FB
N
F

CAT

M Cylinder 1 MDC2
øI

øK RD2 Cylinder 2
FA RD1 8-KA
MVC
Code Common dimensions with switch
Bore size (mm) A B1 B2 C D EE F FA *3 FB I J K KA KK M MM N WF P PP SMG
ø12 52.5 27 22 5.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5 4.5 M3
ø16 52.5 27 22 5.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5 4.5 M3 MSD/
MSDG
ø20 70 36 29.5 8 5.5 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5 10 M5
ø25 76.5 39 32.5 11 6 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5 9 M5 FC*
Switch Reed T0H/TOV, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
dimensions T5H/T5V T3H/T3V T3WH/T3WV F2YH/F2YV, F3YH/F3YV
STK
Bore size (mm) RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2
ø12 1.5 6.5 1.5 1.5 6.5 1.5 3.5 8.5 3.5
SRL3
ø16 3.5 4.5 0 3.5 4.5 0 5.5 6.5 1.5
ø20 7.5 9.5 3 7.5 9.5 3 9.5 11.5 5 12 14 7.5
SRG3
ø25 9.5 10.5 4 9.5 10.5 4 11.5 12.5 6 14 15 8.5
Switch Proximity T2YH/T2YV/ AC magnetic field proof
Proximity F2S/F3S SRM3
dimensions T3YH/T3YV/T2JH/T2JV T2YD/T2YDT/T1H/T1V
Bore size (mm) RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2
SRT3
ø12 - - - - - -
ø16 - - - - - -
MRL2
ø20 11 13 6.5 6.5 8.5 2 6.5 8.5 2
ø25 13 14 7.5 8.5 9.5 3 8.5 9.5 3
MRG2
*1 : To calculate A + S1 + S2, B1 + S1 or B2 + S2 when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm. SM‑25
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Dimensions in ( ) of FA are for the radial lead wire.
*4 : For dimensions of individual accessories, refer to pages 1046 to 1049.
ShkAbs
*5 : Only F type switch is available for the ø20 or ø25 piping port surface.
FJ
● Rod end male thread
Code
a’ c’ H kk’ M MM T wf FK
Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5 Spd
ø16 12 10 10 M6 6 8 3.6 3.5 Contr
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
Ending

907
 SSD2-W Series
SCP*3 Dimensions
● SSD2-W-12 to 25 (without switch) ● Rod end male thread
CMK2
a’ wf
ø12/ø16 c’
CMA2 A+S1+S2 T
WF
B1+S1 B2+S2

øMM
SCM 3-EE Breathing hole
F P C C C D
8-J N PP
SCG
KK
kk’
SCA2 Width across
øMM

flats M
N
F

SCS2 Width across flats H

Cylinder 1
CKV2 M
øK Cylinder 2

øI
8-KA
CAV2/
COVP/N2

SSD2
ø20/ø25
SSG A+S1+S2
WF
B1+S1 B2+S2
SSD F PP
8-J N P C 3-EE C C Breathing hole D

CAT KK

MDC2
øMM
N
F

MVC

SMG M
øK
øI

Cylinder 1 Cylinder 2
8-KA
MSD/
MSDG

FC*

STK

SRL3
Code Dimensions without switch and common dimensions
Bore size (mm) A B1 B2 C D EE F I J K KA KK M MM N WF P PP
SRG3
ø12 42.5 22 17 5.5 5.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5 4.5 M3
ø16 42.5 22 17 5.5 5.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5 4.5 M3
SRM3
ø20 50 26 19.5 8 5.5 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5 10 M5
ø25 56.5 29 22.5 11 6 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5 9 M5
SRT3

MRL2 ●
Rod end male thread
Code
a’ c’ H kk’ M MM T wf
MRG2 Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
SM‑25
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
ShkAbs
*1 : To calculate A + S1 + S2, B1 + S1 or B2 + S2 when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length.
FJ (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.
FK
Spd
Contr

Ending

908
 SSD2-W Series
Dimensions
Dimensions SCP*3
● SSD2-WL-32 to 100 (with switch T0H/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
A+S1+S2 CMK2
a’ wf
WF
c’
B1+S1 B2+S2
F
T CMA2
P C 3-EE C C Breathing hole D
N

øMM
PP HD1 HD2
8-J H SCM
O

KK SCG
kk’
Width across SCA2

øMM
G

FB
flats M
N
F

Width across flats H

SCS2
Cylinder 1
M Cylinder 2 CKV2

øI
øK 8-KA
FA RD1 RD1 CAV2/
COVP/N2
● SSD2-W-32 to 100 (without switch)
A+S1+S2
SSD2
F WF
N B1+S1 B2+S2
H P C 3-EE C C Breathing hole D SSG
8-J
PP
SSD
O

KK

CAT
øMM
G

N
F

MDC2

MVC
Cylinder 1 8-KA
M Cylinder 2
øK
øI

SMG
Code Without switch Common dimensions with switch
Bore size (mm) A B1 B2 A B1 B2 C *7 D *7 EE F FA *3 FB G H I J K KA KK M MM N O WF P PP MSD/
ø32 60.5 30.5 23 80.5 40.5 33 8(11) 8(5.5) Rc1/8 *7
45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face
60 M6 depth 11 M8 depth 13 14 16 34 4.5 7 7 M5 MSDG
depth 5.5
9 spot face
ø40 76.5 40 29.5 96.5 50 39.5 12(11.5) 8.5(8) Rc1/8 52 26.5(30) 27.5 57 15 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7 6 M5
depth 5.5
11 spot face
FC*
ø50 79 40.5 30.5 99 50.5 40.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8 10.5 M6
14 spot face
ø63 86 42 36 106 52 46 13 11 Rc1/4 77 39(42.5) 28.5 84 23 8.7 103 M10 depth 25 M10 depth 15 17 20 60 7 8 11 M8
depth 9
17.5 spot
STK
ø80 104.5 51 43.5 124.5 61 53.5 16 13 Rc3/8 98 49.5(53) 28.5 104 31 10.5 face depth 11 132 M12 depth 28 M16 depth 21 22 25 77 6 10 11.5 M10
17.5 spot
ø100 125.5 60.5 53 145.5 70.5 63 23 15 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 face depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12 12.5 M10
SRL3
Switch Reed T0H/TOV, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity T2YH/T2YV/ Reed
dimensions T5H/T5V T3H/T3V T3WH/T3WV T3YH/T3YV/T2JH/T2JV T8H/T8V
Bore size (mm) RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2 RD1, RD2 HD1 HD2
SRG3
ø32 10 11.5 4 10 11.5 4 12 13.5 6 8.5 11 3.5 - - -
ø40 13 18 7.5 13 18 7.5 15 20 9.5 10.5 16 5.5 6 11.5 1 SRM3
ø50 13 18.5 8.5 13 18.5 8.5 15 20.5 10.5 11 16 6 6.5 11.5 1.5
ø63 13.5 19.5 13.5 13.5 19.5 13.5 15.5 21.5 15.5 11.5 17 11 7 12.5 6.5
ø80 16 26 18.5 16 26 18.5 18 28 20.5 14 23.5 16 9.5 19 11.5 SRT3
ø100 20.5 31.5 24 20.5 31.5 24 22.5 33.5 26 18 29 21.5 13.5 24.5 17
Switch AC magnetic field proof *1 : To calculate A + S1 + S2, B1 + S1 or B2 + S2 when using custom stroke length, apply the next longer standard stroke
length (instead of the custom stroke length) to the stroke length. (Example) If the custom stroke length is 7 mm, apply
MRL2
dimensions T2YD/T2YDT/T1H/T1V
the standard stroke length of 10 mm.
Bore size (mm) RD1, RD2 HD1 HD2
ø32 8.5 11 3.5
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting. MRG2
*3 : Dimensions in ( ) of FA are for the radial lead wire.
ø40 10.5 16 5.5 *4 : For dimensions of individual accessories, refer to pages 1046 to 1049.
ø50 11 16 6 *5 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm. SM‑25
ø63 11.5 17 11 *6 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
ø80 14 23.5 16 *7 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
ø100 18 29 21.5 ShkAbs
● Rod end male thread
Code FJ
a’ c’ H kk’ M MM T wf
Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5 FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5 Spd
ø63 28.5 26 27 M18×1.5 17 20 11 5
Contr
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending
ø100 35.5 32.5 41 M26×1.5 27 30 16 8

909
 Compact cylinder double acting/rotation-stop

SSD2-M Series
SCP*3 ● Bore size: ‌ø12/ø16/ø20/ø25
CMK2
ø32/ø40/ø50/ø63
JIS symbol
CMA2

SCM
Specifications 1 MPa = 10 bar
SCG SSD2-M
Item
SSD2-ML (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4
+1.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 500 50 to 300
SSD Cushion None
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
CAT Non-rotating accuracy (*2) ±1° ±0.7° ±0.8°
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12
MDC2
*1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*2: Initial value at the pull end.
MVC
Stroke length Min. stroke length with switch (2 switches)
SMG
Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
MSD/ (mm) length (mm) length (mm) length (mm) (mm)
MSDG ø12 5/10/15/20 ø12
30 10(5)
ø16 25/30 ø16
FC*
ø20 5/10/15/20/25 ø20
50
STK ø25 30/35/40/45/50 ø25
1 5
ø32 5/10/15/20/25/30/ ø32
5
SRL3 ø40 35/40/45/50/75/100 ø40
100
ø50 10/15/20/25/30 ø50
SRG3 ø63 35/40/45/50/75/100 ø63
*1: ‌When using the type with switch, refer to the table of the min. stroke length with *1: Less
‌ than 10 mm with the 2-color display, off-delay,
SRM3 switch. AC magnetic field proof, T1* or T8* switch is not available.
*2: Values in ( ) are for the type with 1 on rod side.

SRT3
Custom stroke length
MRL2 ● SSD2-M Series
Standard products A + stroke length
MRG2 Item
Standard stroke length body with spacer B + stroke length
Model No. Refer to How to order.
SM‑25
A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
ShkAbs
Bore size Stroke range

FJ 12/16 1 to 29
Stroke range
20 to 25 1 to 49
FK 32 to 63 1 to 99
Model No.: SSD2-M-32-38
Spd
Example of model No. A +2 mm spacer is added to the SSD2-M-32-40 standard cylinder
Contr
to create 38 mm stroke length. B + stroke length is 72 mm.
Ending

910
 SSD2-M Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Applications
Dedicated for For programmable Dedicated for For programmable CMA2
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCM
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green
SCG
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON)
SCA2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29
SCS2
Switch specifications (T type switch)
● 1-color/2-color display/for AC magnetic field proof CKV2
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4) CAV2/
T1H/T1V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT COVP/N2
For programmable Dedicated for programmable For programmable For programmable For programmable controller, For programmable controller, Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve controller controller, relay controller, relay lamp), serial connection relay controller SSD2
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SSG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
SSD
Indicator LED Without indicator LED
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp (Lit when ON) lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) CAT
Leakage ≤ 1 mA at 100 VAC,
1 mA or less 10 μA or less 0 mA 1 mA or less
current ≤ 2 mA at 200 VAC MDC2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 MVC
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. SMG
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) MSD/
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. MSDG
*5 : The F type switch uses a bend-resistant lead wire.
FC*
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.)
(Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100 STK
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 44 94 52 94 61 103 69 11 78 120 80 122 - - - - - - - - - - - -
ø16 58 114 69 114 79 124 90 135 101 146 112 157 - - - - - - - - - - - -
SRL3
ø20 76 131 88 163 101 176 114 189 126 201 139 214 152 227 165 240 178 253 191 266 - - - -
ø25 102 193 117 208 133 224 149 240 165 256 180 271 196 287 212 303 228 319 243 334 - - - - SRG3
ø32 166 280 188 302 210 324 232 346 253 367 275 389 297 411 319 433 341 455 362 476 575 583 682 691
ø40 - - 210 353 237 380 263 406 290 433 317 460 343 486 370 513 396 539 423 566 683 698 815 831 SRM3
ø50 - - 341 535 383 577 425 619 467 661 509 703 552 746 594 788 636 830 678 872 1065 1082 1275 1292
ø63 - - 507 786 562 841 617 896 672 951 727 1006 782 1061 837 1116 893 1172 948 1227 1478 1502 1753 1777
SRT3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa MRL2
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

ø12
Push - 11.3 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02×102 1.13×102 MRG2
Pull - 8.48 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
Push - 20.1 30.2 40.2 60.3 80.4 1.01×102 1.21×102 1.41×102 1.61×102 1.81×102 2.01×102
ø16
Pull - 15.1 22.6 30.2 45.2 60.3 75.4 90.5 1.06×102 1.21×102 1.36×102 1.51×102
SM‑25
Push - 31.4 47.1 62.8 94.2 1.26×10 2
1.57×10 2
1.88×10 2
2.20×10 2
2.51×10 2
2.83×10 2
3.14×10 2
ø20
Pull - 23.6 35.3 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102 ShkAbs
Push - 49.1 73.6 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 37.8 56.7 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102 FJ
Push - 80.4 1.21×102 1.61×102 2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 60.3 90.5 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
FK
ø40
Pull - 1.06×10 2
1.58×10 2
2.11×10 2
3.17×10 2
4.22×10 2
5.28×10 2
6.33×10 2
7.39×10 2
8.44×10 2
9.50×10 2
1.06×10 3
Spd
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50 Contr
Pull - 1.65×10 2
2.47×10 2
3.30×10 2
4.95×10 2
6.60×10 2
8.25×10 2
9.90×10 2
1.15×10 3
1.32×10 3
1.48×10 3
1.65×10 3

Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
ø63 Ending
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103

911
 SSD2-M Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-M 12 5 N LB I SSD2-M Double acting/rotation-stop
SSD2-ML Double acting/rotation-stop/with switch
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-ML 12 5 T0H R N LB I 12 ø12
16 ø16
SCM
20 ø20
A Model No. 25 ø25
SCG 32 ø32
40 ø40
SCA2 B Bore size
50 ø50
63 ø63
SCS2 C Port thread
C Port thread
Blank Rc thread
CKV2 NN NPT thread (ø32 and over) (made-to-order product)
CAV2/ GN G thread (ø32 and over) (made-to-order product)
COVP/N2 D Stroke length (mm)
D Stroke length
SSD2 Refer to the stroke length table on the following page.
E Switch model No.
SSG E Switch model No. Lead Bore size
Lead wire Lead wire Voltage

Contact
*1 Display
Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63
*2
SSD - F2S* ● 2-wire ● ●
*3
- F3S* ● 3-wire ● ●
*8 1-color display
● ●
Proximity

CAT F2H* F2V* ● 2-wire

*9
F3H* F3V* ● 3-wire ● ●
F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
MDC2
F2YH* F2YV* ● 2-wire ● ●
2-color display
F3YH* F3YV* ● 3-wire ● ●
MVC G Option *4
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

SMG T8H* T8V* ● ● 1-color display ● ● ●
Precautions for model No. selection T1H* T1V* ● ● ● ● ● ● ●
MSD/ 2-wire
*1 :
The T2YD* switch cannot be mounted on the ø12 and T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
MSDG ø16 bore sizes. T3H* T3V* ● ● ● ● ● ● ● ● ●
*2 : The T8* switch cannot be mounted on the ø12 to ø32 3-wire
FC* T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
bore sizes.
● ● ● ● ● ● ● ●
Proximity

*3 : The F type switch can only be mounted on the piping T2WH* T2WV* ●
2-wire
STK port surface of bore sizes ø20 and ø25. T2YH* T2YV* ● ● ● ● ● ● ●
*4 : Piston rod of ø12 to ø25 is stainless steel as standard.
2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ●
C type snap ring is stainless steel instead of steel. 3-wire
T3YH* T3YV* ● ● ● ● ● ● ●
SRL3 The rod end male thread nut is stainless steel.
T2YD* - ● 2-color display ● ● ● ● ● ●
*5 : The mounting bracket is included at shipment. 2-wire
T2YDT* - ● AC magnetic field ● ● ● ● ● ●
SRG3 *6 : TorheFAprojection dimension of piston rod WF when LB
is selected is different from that of the T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ●
standard. Refer to the dimensions on pages 917, * Lead wire length
SRM3 919, 921 and 922. The number of the specified
Blank 1 m (standard)
protruding dimension will be added at the end of the
model No. printed on the metal plate on the body. 3 3 m (option)
SRT3 *7 :
“I” and “Y” cannot be selected together. 5 5 m (option) *11
*8 : The F type switch with L type lead wire on ø20 models
cannot be selected on stroke lengths 10 mm or under. F Switch quantity
MRL2 *9 : Switches are shipped with the product. Contact CKD if R 1 on rod side
assembling before shipment is necessary. H 1 on head side
MRG2 *10 : Refer to pages 750 and 751 for combinations of D 2
variations/options.
*11 : F type switch cannot be selected. G Option
SM‑25
Blank Rod end female thread
[Example of model No.] N Rod end male thread
ShkAbs
SSD2-ML-12-5-T0H-R-N-LB-I M *4 Piston rod material (stainless steel) (made to order (ø32 to ø63))

FJ
Model: Compact cylinder rotation-stop H Mounting bracket
Mounting bracket
●
H
B Bore size : ø12 mm Blank Without mounting bracket
*5
FK
●
C Port thread : Rc thread LB Axial foot
*6
●
D Stroke length : 5 mm CB Clevis bracket (pin and snap ring included)
Spd ●
E Switch model No. : Reed T0H switch FA Rod side flange
Contr ● F Switch quantity : 1 on rod side FB Head side flange
●
G Option : Rod end male thread
I Accessory (available when rod end male thread “N” is selected)
Ending ●
H Mounting bracket : Axial foot I Accessory
I Rod eye
●I Accessory : Rod eye *7
Y Rod clevis (pin and snap ring included)
912
 SSD2-M Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ●
40 ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ●
75 ● ● ● ●
CKV2
100 ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : ‌Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color
display, off-delay, AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 910 for the min. stroke length with switch.
*2 : ‌The total length when using a custom stroke length is the same as that when using the next
longer standard stroke length. SSD

CAT

How to order switch MDC2

SW T0H
MVC

SMG
Switch model No.
MSD/
(Item E on page 912)
MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø12 ø16 ø20 ø25 ø32 ø40 ø50
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SRG3
Flange (FA/FB) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50
Clevis bracket (CB) SSD2-CB-12 SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SRM3
Bore size (mm)
ø63 SRT3
Mounting bracket
Foot (LB) SSD2-LB-63
Flange (FA/FB) SSD2-FA-63
MRL2
Clevis bracket (CB) SSD2-CB-63
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

913
 SSD2-M Series
SCP*3
Internal structure and parts list (ø12 to ø25)
● SSD2-ML-12 to 25 (double acting/rotation-stop/with switch)
CMK2
1 2 3 13 6 4 5 7 8 10 9 11

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-M-12 to 25 (double acting/rotation-stop)

1 2 13 6 4 3 5 9 10 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3 No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod Stainless steel 8 Magnet Plastic
MRL2 2 C type snap ring Steel Zinc phosphate 9 Piston Aluminum alloy Chromate
3 Rod metal Special aluminum Alumite 10 Piston packing Nitrile rubber
MRG2 4 Rod metal gasket Nitrile rubber 11 Cover Stainless steel
5 Body Aluminum alloy Hard alumite 13 Hexagon socket set screw Steel
SM‑25 6 Rod packing Nitrile rubber
7 Spacer Aluminum alloy Chromate
ShkAbs

FJ
Repair parts list
Bore size (mm) Kit No. Repair parts No.
ø12 SSD2-M-12K
FK
ø16 SSD2-M-16K
4 6 10
Spd ø20 SSD2-M-20K
Contr ø25 SSD2-M-25K

Ending

914
 SSD2-M Series
Internal structure and parts list
Internal structure and parts list (ø32 to ø63) SCP*3
● SSD2-ML-32 to 63 (double acting/rotation-stop/with switch)
CMK2
1 3 2 6 4 5 7 8 9 10 11

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

13 12 SSG

● SSD2-M-32 to 63 (double acting/rotation-stop) SSD

1 3 2 6 4 5 9 10 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
13 12

SRM3

No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 8 Magnet Plastic
2 C type snap ring Steel Zinc phosphate MRL2
9 Piston Aluminum alloy Chromate
ø32 to ø50: Special aluminum
3 Rod metal Alumite
ø63: Aluminum alloy 10 Piston packing Nitrile rubber MRG2
4 Rod metal gasket Nitrile rubber 11 Cover Aluminum alloy Alumite
5 Body Aluminum alloy Hard alumite 12 Bush Oil impregnated bearing alloy SM‑25
6 Rod packing Nitrile rubber 13 Hexagon socket set screw Steel
7 Spacer Aluminum alloy Chromate ShkAbs

FJ
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FK
ø32 SSD2-M-32K
ø40 SSD2-M-40K Spd
4 6 10
ø50 SSD2-M-50K Contr
ø63 SSD2-M-63K
Ending

915
 SSD2-M Series
SCP*3
Dimensions
● SSD2-ML-12 to 25 (with switch) ● Rod end male thread
CMK2 a’ wf
ø12/ø16 A + stroke length c’
CMA2 F WF B + stroke length T
N 8-J C D 2-EE

øMM
Mounting hole
SCM
KK
SCG
HD
kk’

øMM
SCA2
N
F

Width across
flats M
FB

*4
FA

Width across flats H

SCS2
øK

FB øI
CKV2 RD KA
M
CAV2/ FA
COVP/N2 *4
ø20/ø25
A + stroke length
SSD2 F
WF B + stroke length
N 8-J C D 2-EE
SSG Mounting hole

SSD KK
HD

CAT
øMM
FB
N
F

MDC2

MVC
øK

SMG RD øI 8-KA
M
FA
MSD/ *4
MSDG

FC* Code Common dimensions with switch

Bore size (mm) A *1 B *1 C D EE F FA *4 FB I J K KA KK M MM N WF
STK ø12 30.5 27 10.5 5.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
ø16 30.5 27 10.5 5.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5

SRL3 ø20 39 34.5 13 5.5 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 42.5 37.5 16 6 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
Switch Reed T0H/T0V, T5H/ Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/
SRG3 Proximity F2S/F3S
dimensions T5V T3H/T3V T3WH/T3WV F3V, F2YH/F2YV, F3YH/F3YV
Bore size (mm) HD RD HD RD HD RD HD RD HD RD
SRM3
ø12 0 7.5 0 7.5 2 9.5
ø16 0 7 0 7 2.5 9.5
SRT3 ø20 3 11.5 3 11.5 5 13 7.5 15.5 6.5 14.5
ø25 3 14.5 3 14.5 6 16 8.5 18.5 7.5 17.5
MRL2 *1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
MRG2 (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
SM‑25 *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : Only F type switch is available for the ø20 or ø25 piping port surface.
ShkAbs

FJ
● Dimensions of rod end male thread part
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

916
 SSD2-M Series
Double acting/rotation-stop
Dimensions with mounting bracket SCP*3
● Axial foot (LB) with switch ● Clevis bracket (CB) with switch
SSD2-ML-12 to 25 -LB SSD2-MY-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG

øCA
N

SCG

E
N
AT
AH

CD
AU Low head hexagon SCA2

H1
TR socket bolt 8-G N
4-øAB CJ + stroke length

0
TS AK
Mounting bolt 4-C E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm) CAT
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3
-0.1
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.4
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5
-0.1
16 -0.3 MDC2
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28 20 -0.1
-0.3

Code Male thread Code Female thread Male thread

Bore size Bore size MVC
(mm) WF LF A B LX a’ WF LF A B LX WF A B CJ a’ wf A B CJ
(mm)
ø12 13.5 19.5 45.3 27 15 10.5 13.5 19.5 55.8 27 15 ø12 3.5 50.5 27 44.5 10.5 8.5 61 27 44.5
ø16 13.5 19.5 45.3 27 15 12 13.5 19.5 57.3 27 15 ø16 3.5 51.5 27 45.5 12 8.5 63.5 27 45.5
SMG
ø20 14.5 20.5 56.2 34.5 22.5 14 14.5 20.5 70.2 34.5 22.5 ø20 4.5 66 34.5 57 14 9.5 80 34.5 57
ø25 15 22.5 59.7 37.5 22.5 17.5 15 22.5 77.2 37.5 22.5 ø25 5 72.5 37.5 62.5 17.5 10 90 37.5 62.5 MSD/
MSDG
● ‌Rod side flange (FA) with switch ● ‌Head side flange (FB) with switch
SSD2-ML-12 to 25 -FA SSD2-ML-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
ShkAbs
Bore size Bore size
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12 FJ
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size
WF A B a’ wf A B
Bore size
WF A B a’ wf A B
Spd
(mm) (mm) Contr
ø12 13.5 40.5 27 10.5 13.5 51 27 ø12 3.5 36 27 10.5 8.5 46.5 27
ø16 13.5 40.5 27 12 13.5 52.5 27 ø16 3.5 36 27 12 8.5 48 27
ø20 14.5 49 34.5 14 14.5 63 34.5 ø20 4.5 47 34.5 14 9.5 61 34.5 Ending
ø25 15 52.5 37.5 17.5 15 70 37.5 ø25 5 50.5 37.5 17.5 10 68 37.5

917
 SSD2-M Series
SCP*3
Dimensions
● SSD2-M-12 to 25 (without switch) ● Rod end male thread
CMK2 a’ wf
ø12/ø16 A + stroke length c’
CMA2 F WF B + stroke length T
N 8-J C D 2-EE

øMM
Mounting hole
SCM
KK
SCG
kk’

øMM
N
F

SCA2 Width across

flats M
Width across flats H
SCS2
øK
øI
CKV2 8-KA
M
CAV2/
COVP/N2
ø20/ø25
A + stroke length
SSD2
F WF B + stroke length
8-J N C D 2-EE
SSG
Mounting hole

SSD KK

CAT
øMM
N
F

MDC2

MVC
øK

SMG M øI 8-KA

MSD/
MSDG

FC*
Code Without switch
STK
Bore size (mm) A *1 B *1 C D EE F I J K KA KK M MM N WF
ø12 25.5 22 10.5 5.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
SRL3
ø16 25.5 22 10.5 5.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 29 24.5 13 5.5 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRG3
ø25 32.5 27.5 16 6 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5

SRM3 *1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value.
(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
SRT3 *2 : For dimensions of individual accessories, refer to pages 1046 to 1049.
● Dimensions of rod end male thread part
MRL2
Code
a’ c’ H kk’ M MM T wf
MRG2 Bore size (mm)
ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
SM‑25
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
ShkAbs

FJ

FK
Spd
Contr

Ending

918
 SSD2-M Series
Double acting/rotation-stop
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch ● Clevis bracket (CB) without switch
SSD2-M-12 to 25 -LB SSD2-M-12 to 25 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D CMA2
N CB
CC H
SCM
AG

øCA
N

SCG

N
E
AT
AH

CD
AU Low head hexagon SCA2

H1
TR socket bolt 8-G N
4-øAB CJ + stroke length

0
TS AK
Mounting bolt 4-G E
LF LX + stroke length SCS2
Rod end male thread
Rod end male thread
A + stroke length
A + stroke length CKV2
a’ wf B + stroke length
a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Female thread Code Common dimensions SSD

Bore size Bore size
AB AG AH AK AT AU G N TR TS M CA CB CC CD D E G H N UB
(mm) (mm) CAT
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 ø12 12 5.2 +00.2 7 5 4 25 M4×12 C1.5 15.5 10 -0.1
-0.3
-0.1
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8 ø16 15 6.6 +00.3 8 5 5 29 M4×12 C2 20 12 -0.4
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 ø20 20 8.2 +00.2 12 8 5 36 M6×16 C4 25.5 16 -0.1
-0.3 MDC2
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 ø25 24 10.2 +00.2 14 10 5 40 M6×16 C5 28 20 -0.1
-0.3

Code Male thread Code Female thread Male thread

Bore size Bore size MVC
WF LF A B LX a’ WF LF A B LX WF A B CJ a’ wf A B CJ
(mm) (mm)
ø12 13.5 19.5 40.3 22 10 10.5 13.5 19.5 50.8 22 10 ø12 3.5 45.5 22 39.5 10.5 8.5 56 22 39.5
ø16 13.5 19.5 40.3 22 10 12 13.5 19.5 52.3 22 10 ø16 3.5 46.5 22 40.5 12 8.5 58.5 22 40.5
SMG
ø20 14.5 20.5 46.2 24.5 12.5 14 14.5 20.5 60.2 24.5 12.5 ø20 4.5 56 24.5 47 14 9.5 70 24.5 47
ø25 15 22.5 49.7 27.5 12.5 17.5 15 22.5 67.2 27.5 12.5 ø25 5 62.5 27.5 52.5 17.5 10 80 27.5 52.5 MSD/
MSDG
● Rod side flange (FA) without switch ● ‌Head side flange (FB) without switch
SSD2-M-12 to 25 -FA SSD2-M-12 to 25 -FB FC*
FM
FM A + stroke length A + stroke length FL
FL WF B + stroke length WF B + stroke length FT N
STK
N FT
2-FD SRL3
2-FD
FH
N

SRG3
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt Rod end male thread Hexagon socket button head bolt
A + stroke length
A + stroke length SRT3
a’ wf B + stroke length
Rod end male thread a’ wf B + stroke length FT
FT
MRL2

MRG2

SM‑25
Code Common dimensions Code Common dimensions
ShkAbs
Bore size Bore size
FD FH FL FM FT N G FD FH FL FM FT N G
(mm) (mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 ø12 4.5 25 45 55 5.5 15.5 M4×12 FJ
ø16 4.5 30 45 55 5.5 20 M4×12 ø16 4.5 30 45 55 5.5 20 M4×12
ø20 6.6 39 48 60 8 25.5 M6×16 ø20 6.6 39 48 60 8 25.5 M6×16
ø25 6.6 42 52 64 8 28 M6×16 ø25 6.6 42 52 64 8 28 M6×16 FK
Code Female thread Male thread Code Female thread Male thread
Bore size
WF A B a’ wf A B
Bore size
WF A B a’ wf A B
Spd
(mm) (mm) Contr
ø12 13.5 35.5 22 10.5 13.5 46 22 ø12 3.5 31 22 10.5 8.5 41.5 22
ø16 13.5 35.5 22 12 13.5 47.5 22 ø16 3.5 31 22 12 8.5 43 22
ø20 14.5 39 24.5 14 14.5 53 24.5 ø20 4.5 37 24.5 14 9.5 51 24.5 Ending
ø25 15 42.5 27.5 17.5 15 60 27.5 ø25 5 40.5 27.5 17.5 10 58 27.5

919
 SSD2-M Series
SCP*3
Dimensions
● SSD2-ML-32 to 63 (with switch) ● Rod end male thread
CMK2 F A + stroke length a’ wf
N WF B + stroke length V
CMA2 8-J C D 2-EE
c’
H Mounting hole V
T
SCM
O

KK
HD
SCG
kk’

øP h9
øMM
G

FB
N
F

SCA2 Width across flats H

øMM
SCS2 Width across flats M

M 8-KA

øI
RD
CKV2
øK

FA
CAV2/ *4
COVP/N2 ● SSD2-M-32 to 63 (without switch)

SSD2 F A + stroke length

N
WF B + stroke length
SSG H 8-J C D 2-EE
Mounting hole V

SSD
O

KK

CAT
øP h9
øMM
G

FB
N

MDC2
F

MVC
øI

SMG øK M
8-KA

MSD/
MSDG Code Without switch Common dimensions with switch
Bore size (mm) A *1/*6 B *1/*6 A *1 B *1 C *8 D *8 EE F FA *4 FB G H I J K KA
FC* ø32 39(49) 32(42) 49 42 18(20) 8(5.5) Rc1/8 *7
45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11
ø40 36.5(46.5) 29.5(39.5) 46.5 39.5 12(11.5) 8.5(8) Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11
STK ø50 38.5(48.5) 30.5(40.5) 48.5 40.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13
ø63 44(54) 36(46) 54 46 13 11 Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face depth 9 103 M10 depth 25
SRL3
Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/
Code Common dimensions with switch
T5H/T5V T3H/T3V T2WV, T3WH/T3WV
SRG3 Bore size (mm) KK M MM N O P V WF HD *2 RD *2 HD *2 RD *2 HD RD
ø32 M8 depth 13 14 16 34 4.5 21 2 7 4.5 19 4.5 19 5 20.5
SRM3 ø40 M8 depth 13 14 16 40 5 28 2 7 7 12 7 12 8.5 13.5
ø50 M10 depth 15 18 20 50 7 35 2 8 7.5 12.5 7.5 12.5 9 14
SRT3 ø63 M10 depth 15 18 20 60 7 35 2 8 12.5 13 12.5 13 14 14.5
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
MRL2 length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
MRG2 *3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
*4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
SM‑25 *6 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
*7 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*8 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
ShkAbs

FJ
● Rod end male thread
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø32 23.5 20.5 22 M14×1.5 14 16 8 5
Contr ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 18 20 11 5
Ending ø63 28.5 26 27 M18×1.5 18 20 11 5

920
 SSD2-M Series
Double acting/rotation-stop
Dimensions with mounting bracket SCP*3
● Axial foot (LB)
SSD2-M(L)-32 to 63 -LB CMK2

A + stroke length Rod end male thread CMA2

WF B + stroke length M A + stroke length
a’ wf B + stroke length SCM

SCG
AG

SCA2
AH
AT
AD
AE

AU
N
4-øAB
Low head hexagon socket bolt 4-G SCS2
TR AK
TS LF LX + stroke length LF
CKV2
CAV2/
COVP/N2
Code Common dimensions Female thread SSD2
Bore size Without switch
(mm)
AB AD AE AG AH AK AT AU G N TR TS M WF LF
A B LX
SSG
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 17 25 56.2(66.2) 32(42) 16(26)
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 17 25 53.7(63.7) 29.5(39.5) 13.5(23.5)
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 18 29.5 56.7(66.7) 30.5(40.5) 7.5(17.5)
SSD
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 18 31 63.2(73.2) 36(46) 10(20)
Code Female thread Male thread CAT
Bore size With switch Without switch With switch
a’ WF LF
(mm) A B LX A B LX A B LX MDC2
ø32 66.2 42 26 23.5 15 23 77.7(87.7) 32(42) 16(26) 87.7 42 26
ø40 63.7 39.5 23.5 23.5 15 23 75.2(85.2) 29.5(39.5) 13.5(23.5) 85.2 39.5 23.5 MVC
ø50 66.7 40.5 17.5 28.5 15 26.5 82.2(92.2) 30.5(40.5) 7.5(17.5) 92.2 40.5 17.5
ø63 73.2 46 20 28.5 15 28 88.7(98.7) 36(46) 10(20) 98.7 46 20
SMG
* Dimensions in ( ) are for stroke lengths of more than 50 mm. * A pin and a snap ring are included.
MSD/
MSDG

FC*
● ‌Clevis bracket (CB)
SSD2-M(L)-32 to 63 -CB STK

A + stroke length UB Rod end male thread

SRL3
WF B + stroke length D CB +00.2
CC A + stroke length
a’ wf B + stroke length SRG3

R
MR SRM3
N
E

SRT3
CD
H1
0

AC MRL2
CJ + stroke length Mounting bolt 4-G N
E CJ + stroke length
MRG2

SM‑25
Code Common dimensions Female thread Male thread
Bore size Without switch With switch Without switch With switch
AC CB CC CD D E G MR N UB WF a’ wf ShkAbs
(mm) A B CJ A B CJ A B CJ A B CJ
ø32 4.5 18.2 14 10 5 45 M6×16 10 34 36 7 69 32 59 79 42 69 23.5 14 90.5 32 57 100.5 42 67
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 68.5 29.5 58.5 78.5 39.5 68.5 23.5 5 90 29.5 56.5 100 39.5 66.5 FJ
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 80.5 30.5 66.5 90.5 40.5 76.5 28.5 5 106 30.5 63.5 116 40.5 73.5
ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 88 36 74 98 46 84 28.5 5 113.5 36 71 123.5 46 81 FK
Spd
Contr

Ending

921
 SSD2-M Series
SCP*3
Dimensions with mounting bracket
● Rod side flange (FA)
CMK2 SSD2-M(L)-32 to 63 -FA

CMA2
Rod end male thread

SCM FM A + stroke length A + stroke length

FL WF B + stroke length a’ wf B + stroke length
N 4-FD FT FT
SCG

SCA2
FH
FC

SCS2
Mounting bolt 4-G
CKV2 ø32 to ø63: ‌Hexagon socket
button head bolt
CAV2/ ø80/ø100: Special bolt
COVP/N2

SSD2 Code Common dimensions Female thread

Bore size Without switch With switch
FC FD FH FL FM FT N G WF
(mm) A B A B
SSG
ø32 34 5.5 48 56 65 8 34 M6×16 17 49(59) 32(42) 59 42
ø40 40 5.5 54 62 72 8 40 M6×16 17 46.5(56.5) 29.5(39.5) 56.5 39.5
SSD ø50 50 6.6 67 76 89 9 50 M8×20 18 48.5(58.5) 30.5(40.5) 58.5 40.5
ø63 60 9 80 92 108 9 60 M10×25 18 54(64) 36(46) 64 46
CAT Code Male thread
Bore size Without switch With switch
a’ wf
MDC2 (mm) A B A B
ø32 23.5 15 70.5(80.5) 32(42) 80.5 42
MVC ø40 23.5 15 68(78) 29.5(39.5) 78 39.5
ø50 28.5 15 74(84) 30.5(40.5) 84 40.5
ø63 28.5 15 79.5(89.5) 36(46) 89.5 46
SMG
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
MSD/
MSDG

FC*
● Head side flange (FB)
STK SSD2-M(L)-32 to 63 -FB

SRL3 Rod end male thread

FM
A + stroke length FL A + stroke length
SRG3 B + stroke length wf B + stroke length
WF FT N 4-FD a’ FT

SRM3

SRT3
FH
FC

MRL2
Mounting bolt 4-G
ø32 to ø63: ‌Hexagon socket
MRG2 button head bolt
ø80/ø100: Special bolt
SM‑25
Code Common dimensions Female thread Male thread
Bore size Without switch With switch Without switch With switch
ShkAbs FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B
ø32 34 5.5 48 56 65 8 34 M6×16 7 47 32 57 42 23.5 14 68.5 32 78.5 42
FJ ø40 40 5.5 54 62 72 8 40 M6×16 7 44.5 29.5 54.5 39.5 23.5 5 66 29.5 76 39.5
ø50 50 6.6 67 76 89 9 50 M8×20 8 47.5 30.5 57.5 40.5 28.5 5 73 30.5 83 40.5
FK ø63 60 9 80 92 108 9 60 M10×25 8 53 36 63 46 28.5 5 78.5 36 88.5 46

Spd
Contr

Ending

922
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

923
 Compact cylinder double acting/double rod/rotation-stop

SSD2-DM Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25
CMK2
ø32/ø40/ø50/ø63
JIS symbol
CMA2

SCM
Specifications 1 MPa = 10 bar
SCG SSD2-DM
Item
SSD2-DML (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4
+1.0
Stroke tolerance mm
SSG 0
Working piston speed mm/s 50 to 500 50 to 300
SSD Cushion None
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
CAT Non-rotating accuracy (*2) ±1° ±0.7° ±0.8°
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12
MDC2
*1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*2: Initial value at the pull end.
MVC
Stroke length
SMG
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
MSD/ ø12 5/10/15/20
MSDG 30
ø16 25/30

FC* ø20 5/10/15/20/25

50 5
ø25 30/35/40/45/50
STK ø32 5/10/15/20/25/30/
ø40 35/40/45/50/75/100
100
SRL3 ø50 10/15/20/25/30
10
ø63 35/40/45/50/75/100
SRG3 *1: When using the type with switch, refer to the table of the min. stroke length with switch.

SRM3 Min. stroke length with switch (2 switches)

Bore size (mm) T0H/V / T5H/V T2H/V / T3H/V
SRT3
ø12
10(5)
ø16
MRL2
ø20
5
MRG2 ø25
5
ø32
SM‑25 ø40
ø50
10 10
ShkAbs ø63
*1: ‌Less than 10 mm with the 2-color display, off-delay, AC magnetic field proof, T1* or T8* switch is not
FJ available.
*2: ‌Values in ( ) are for the type with 1 on rod side.

FK
Spd
Contr

Ending

924
 SSD2-DM Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV F3YH/
F2S F3S F2H/F2V F3H/F3V
F2YV (made to order) F3YV
Dedicated for For programmable Dedicated for For programmable
CMA2
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Yellow LED Red/green Red/green
Indicator lamp
LED
LED
Yellow LED
LED SCA2
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less SCS2
Weight g 1 m:10 3 m:29
CKV2
Switch specifications (T type switch)
● 1-color/2-color display/for AC magnetic field proof CAV2/
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire COVP/N2
Item T2H/T2V/ T2WH/ T3PH/ T3WH/ T2YD(*4) SSD2
T1H/T1V T2YH/T2YV T3H/T3V T3YH/T3YV T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2WV T3PV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable SSG
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
SSD
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
CAT
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
Indicator LED Without LED MDC2
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp (Lit when ON) indicator lamp (Lit when ON)
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
MVC
≤ 1 mA at 100 VAC,
Leakage current 1 mA or less 10 μA or less 0 mA 1 mA or less
≤ 2 mA at 200 VAC
SMG
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 MSD/
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 MSDG
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. FC*
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C)
STK
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire.
SRL3
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100 SRG3
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø12 52 105 60 105 69 115 77 124 86 134 95 147 - - - - - - - - - - - - SRM3
ø16 74 133 85 133 95 144 106 156 117 168 128 177 - - - - - - - - - - - -
ø20 131 187 143 222 161 238 179 254 196 269 214 285 232 301 249 316 267 332 284 347 - - - - SRT3
ø25 147 238 162 253 178 269 194 285 210 301 226 316 242 332 257 348 275 364 288 379 - - - -
ø32 184 299 230 344 275 390 322 436 366 481 413 527 459 573 469 612 485 628 522 665 776 785 1004 1012 MRL2
ø40 283 426 310 453 336 479 363 506 390 533 416 569 443 601 507 617 553 663 601 707 1317 1333 1475 1490
ø50 - - 508 702 558 751 608 803 658 851 708 901 758 950 808 1001 835 1033 911 1105 2007 2025 2252 2270 MRG2
ø63 - - 902 1266 977 1341 1052 1416 1127 1491 1202 1566 1278 1642 1353 1717 1428 1792 1503 1867 2218 2242 2593 2617
SM‑25
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa ShkAbs
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ø12 Push/Pull - 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
FJ
ø16 Push/Pull - 22.6 30.2 45.2 60.3 75.4 90.5 1.06 × 102 1.21 × 102 1.36 × 102 1.51 × 102
ø20 Push/Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102
FK
ø25 Push/Pull - 56.7 75.6 1.13 × 10 1.51 × 10 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
2 2

ø32 Push/Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102 Spd
ø40 Push/Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103 Contr
ø50 Push/Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
ø63 Push/Pull 2.80 × 10 4.20 × 102
2
5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
Ending

925
 SSD2-DM Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-DM 12 5 N LB I SSD2-DM Double acting/double rod/rotation-stop
SSD2-DML Double acting/double rod/rotation-stop/with switch
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-DML 12 5 T0H R N LB I 12 ø12
16 ø16
SCM
20 ø20
A Model No. 25 ø25
SCG 32 ø32
40 ø40
SCA2 B Bore size
50 ø50
63 ø63
SCS2 C Port thread
C Port thread
Blank Rc thread
CKV2 NN NPT thread (ø32 and over) (made-to-order product)
CAV2/ GN G thread (ø32 and over) (made-to-order product)
COVP/N2 D Stroke length (mm)
D Stroke length
SSD2 Refer to the stroke length table on the following page.

SSG E Switch model No.

E Switch model No. Lead wire Lead wire Voltage Lead Bore size
Contact
*1 Display
Straight L-shaped AC DC wire 12 16 20 25 32 40 50 63
SSD *2
- F2S* ● 2-wire ● ●
*3
- F3S* ● 3-wire ● ●
CAT *8 1-color display
● ●
Proximity

F2H* F2V* ● 2-wire

*9
F3H* F3V* ● 3-wire ● ●
MDC2 F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
2-color display
MVC G Option *4 F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

SMG T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

Precautions for model No. selection T8H* T8V* ● ● 1-color display ● ● ●
MSD/ T1H* T1V* ● ● ● ● ● ● ●
MSDG *1 : The T2YD* switch cannot be mounted on the ø12 and 2-wire
ø16 bore sizes. T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
*2 : The T8* switch cannot be mounted on the ø12 to ø32 T3H* T3V* ● ● ● ● ● ● ● ● ●
FC* 3-wire
bore sizes. T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
*3 : The F type switch can only be mounted on the piping ● ● ● ● ● ● ● ● ●
Proximity

T2WH* T2WV*
STK port surface of bore sizes ø20 and ø25. 2-wire
T2YH* T2YV* ● ● ● ● ● ● ●
*4 : Piston rod of ø12 to ø25 is stainless steel as standard. 2-color display
C type snap ring is stainless steel instead of steel. T3WH* T3WV* ● ● ● ● ● ● ● ● ●
3-wire
SRL3 The rod end male thread nut is stainless steel. T3YH* T3YV* ● ● ● ● ● ● ●
*5 : The mounting bracket is included at shipment. T2YD* - ● 2-color display ● ● ● ● ● ●
2-wire
SRG3 *6 : The projection dimension of piston rod WF when LB T2YDT* - ● for AC magnetic field ● ● ● ● ● ●
or FA is selected is different from that of the T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ●
standard. Refer to the dimensions on pages 931,
SRM3 933 and 935. The number of the specified * Lead wire length
protruding dimension will be added at the end of the Blank 1 m (standard)
model No. printed on the metal plate on the body. 3 3 m (option)
SRT3 *7 :
“I” and “Y” cannot be selected together.
*8 : The F type switch with L type lead wire on ø20 models
5 5 m (option) *11

MRL2 cannot be selected on stroke lengths 10 mm or under. F Switch quantity

*9 : Switches are shipped with the product. Contact CKD if
R 1 on rod side
assembling before shipment is necessary.
MRG2 *10 : Refer to pages 750 and 751 for combinations of H 1 on head side
variations/options. D 2
*11 : F type switch cannot be selected.
SM‑25 G Option
[Example of model No.] Blank Rod end female thread
ShkAbs N Rod end male thread
SSD2-DML-12-5-T0H-R-N-LB-I M *4 Piston rod material (stainless steel) (made to order (ø32 to ø63))
Model: Compact cylinder rotation-stop
FJ H Mounting bracket
●
B Bore size : ø12 mm H Mounting bracket
Blank Without mounting bracket
●
C Port thread : Rc thread *5
FK LB Axial foot
●
D Stroke length : 5 mm *6
Rod side flange
Spd ●
E Switch model No. : Reed T0H switch FA

Contr ● F Switch quantity : 1 on rod side I Accessory (available when rod end male thread “N” is selected)
●
G Option : Rod end male thread I Accessory
I Rod eye
Ending ●
H Mounting bracket : Axial foot *7
Y Rod clevis (pin and snap ring included)
●I Accessory : Rod eye
926
 SSD2-DM Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
12 16 20 25 32 40 50 63 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ●
40 ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ●
75 ● ● ● ●
CKV2
100 ● ● ● ●
Min. stroke length (mm) *1 5 10 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 - By 5 mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color
display, off-delay, AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 924 for the min. stroke length with switch.
*2 : Available only for more than 50 mm stroke length.
SSD

CAT

How to order switch MDC2

SW T0H
MVC

SMG
Switch model No.
MSD/
(Item E on page 926)
MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø12 ø16 ø20 ø25 ø32 ø40 ø50
Mounting bracket
Foot (LB) SSD2-LB-12 SSD2-LB-16 SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SRG3
Flange (FA) SSD2-FA-12 SSD2-FA-16 SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50
Bore size (mm) SRM3
ø63
Mounting bracket
Foot (LB) SSD2-LB-63 SRT3
Flange (FA) SSD2-FA-63
*1: The foot mounting bracket is provided as 2 pcs./set.
MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

927
 SSD2-DM Series
SCP*3
Internal structure and parts list (ø12 to ø25)
● SSD2-DML-12 to 25 (double acting/double rod/rotation-stop/with switch)
CMK2
1 2 3 4 5 6 7 8 9 10 12 11

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-DM-12 to 25 (double acting/double rod/rotation-stop)

1 2 3 4 5 6 9 10 12 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3 No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod A Stainless steel Industrial chrome plating 7 Spacer Aluminum alloy Chromate
MRL2 2 C type snap ring Steel Zinc phosphate 8 Magnet Plastic
3 Rod metal Special aluminum Alumite 9 Piston Aluminum alloy Chromate
MRG2 4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber
5 Body Aluminum alloy Hard alumite 11 Piston rod B Stainless steel Industrial chrome plating
SM‑25 6 Rod packing Nitrile rubber 12 Hexagon socket set screw Steel

ShkAbs
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FJ
ø12 SSD2-DM-12K
ø16 SSD2-DM-16K
FK 4 6 10
ø20 SSD2-DM-20K
Spd ø25 SSD2-DM-25K
Contr

Ending

928
 SSD2-DM Series
Internal structure and parts list
Internal structure and parts list (ø32 to ø63) SCP*3
● SSD2-DML-32 to 63 (double acting/double rod/rotation-stop/with switch)
CMK2
1 6 2 3 4 5 7 8 9 10 12 11

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-DM-32 to 63 (double acting/double rod/rotation-stop) SSD

1 6 2 3 4 5 9 10 12 11
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 7 Spacer Aluminum alloy ø32: Chromate
2 C type snap ring Steel Zinc phosphate 8 Magnet Plastic MRL2
3 Rod metal Special aluminum Chromate 9 Piston Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 10 Piston packing Nitrile rubber MRG2
5 Body Aluminum alloy Hard alumite 11 Piston rod B Steel Industrial chrome plating
6 Rod packing Nitrile rubber 12 Bush Oil impregnated bearing alloy SM‑25

ShkAbs
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FJ
ø32 SSD2-DM-32K
ø40 SSD2-DM-40K
4 6 10 FK
ø50 SSD2-DM-50K
ø63 SSD2-DM-63K Spd
Contr

Ending

929
 SSD2-DM Series
SCP*3
Dimensions
● SSD2-DML-12 to 25 (with switch) ● Rod end male thread
CMK2 A + (2 × stroke length) a’ wf
ø12/ø16 c’
WF B + stroke length WF + stroke length
CMA2 F T
C D
N

øMM
8-J 2-EE HD
SCM (Mounting hole)
KK KK
SCG FB

kk’

øMM
SCA2
N
F

Width across
flats M
FA *4

Width across flats H

SCS2
FB 8-KA
øK

CKV2

øI
M RD
CAV2/ FA *4
COVP/N2
ø20/ø25
A + (2 × stroke length)
SSD2 WF B + stroke length WF + stroke length
F
C D
SSG 8-J N 2-EE
RD HD
(Mounting hole)
SSD
KK KK
CAT
øMM
FB

MDC2
N
F

MVC

SMG
øI

M
øK

8-KA
MSD/ FA *4
MSDG
Note: The positions for the left and right widths across flats are unspecified.
FC*
Code Common dimensions with switch
STK Bore size (mm) A B C D EE F FA *4 FB I J K KA KK M MM N WF
ø12 39 32 5.5 10.5 M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5

SRL3 ø16 39 32 5.5 10.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 50 41 8 13 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5

SRG3 ø25 54 44 11 16 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5
Switch Reed T0H/T0V, T5H/ Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/
Proximity F2S/F3S
SRM3 dimensions T5V *6 T3H/T3V *6 T3WH/T3WV *6 F3V, F2YH/F2YV, F3YH/F3YV
Bore size (mm) HD RD HD RD HD RD HD RD HD RD
ø12 10 2.5 10 2.5 11.5 4
SRT3
ø16 10 2 10 2 11.5 3.5
ø20 14.5 6.5 14.5 6.5 16 8 19 12 18 11
MRL2
ø25 16.5 9.5 16.5 9.5 18 11 20 13 19 12

MRG2 *1 : Only F type switch is available for the ø20 or ø25 piping port surface.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
SM‑25 *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*6 : Dimensions in ( ) of codes HD and RD are for the type with rubber cushion.
ShkAbs
*7 : The RD side can be identified with a mark on the port surface of the body.

FJ
● Dimensions of rod end male thread part
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

930
 SSD2-DM Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● ‌Axial foot (LB) with switch
SSD2-DML-12 to 25 -LB CMK2

Rod end male thread CMA2

A + (2 × stroke length)
A + (2 × stroke length)
WF B + stroke length WF + stroke length SCM
N a’ wf B + stroke length wf + stroke length a’
M
SCG
N

SCA2
AG

AT
AH

SCS2
AU
TR Low head hexagon socket LF LF + stroke length
4-øAB AK
TS Bolt 8-G
CKV2
LF LX + stroke length LF + stroke length
CAV2/
COVP/N2
Code Common dimensions SSD2
Bore size
AB AG AH AK AT AU G N TR TS M
(mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 SSG
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 SSD
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2
Code Female thread Male thread CAT
Bore size
WF LF A B LX a’ wf LF A B LX
(mm)
ø12 13.5 19.5 59 32 15 10.5 13.5 19.5 80 32 15 MDC2
ø16 13.5 19.5 59 32 15 12 13.5 19.5 83 32 15
ø20 14.5 20.5 70 41 19 14 14.5 20.5 98 41 19 MVC
ø25 15 22.5 74 44 19 17.5 15 22.5 109 44 19

SMG

● ‌Rod side flange (FA) with switch MSD/

SSD2-DML-12 to 25 -FA MSDG

FC*
Rod end male thread
FM A + (2 × stroke length)
A + (2 × stroke length) STK
FL WF1 B + stroke length WF2 + stroke length
N a’ wf1 B + stroke length wf2 + stroke length a’
FT
SRL3
2-FD

SRG3
FH
N

SRM3
Mounting bolt 4-G
Hexagon socket button head bolt SRT3

MRL2
Code Common dimensions Female thread Male thread
Bore size MRG2
FD FH FL FM FT N G WF1 WF2 A B a’ wf1 wf2 A B
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 13.5 3.5 49 32 10.5 13.5 3.5 70 32
ø16 4.5 30 45 55 5.5 20 M4×12 13.5 3.5 49 32 12 13.5 3.5 73 32 SM‑25
ø20 6.6 39 48 60 8 25.5 M6×16 14.5 4.5 60 41 14 14.5 4.5 88 41
ø25 6.6 42 52 64 8 28 M6×16 15 5 64 44 17.5 15 5 99 44 ShkAbs

FJ

FK
Spd
Contr

Ending

931
 SSD2-DM Series
SCP*3
Dimensions
● SSD2-DM-12 to 25 (without switch) ● Rod end male thread
CMK2 a’ wf
A + (2 × stroke length)
ø12/ø16 c’
WF B + stroke length WF + stroke length
CMA2 F
T
C 2-EE D

øMM
8-J N
SCM (Mounting hole)
KK
KK
SCG
kk’

øMM
SCA2
N
F

Width across
flats M
Width across flats H
SCS2
8-KA

øI
M
øK

CKV2
CAV2/
COVP/N2
ø20/ø25 A + (2 × stroke length)
SSD2 WF B + stroke length WF + stroke length
F
8-J N 2-EE
SSG C D
(Mounting hole)

SSD KK
KK

CAT
øMM
N
F

MDC2

MVC
øI

8-KA
øK

SMG
M
MSD/
MSDG

FC*
Note: The positions for the left and right widths across flats are unspecified.
Code Dimensions without switch and common dimensions
STK
Bore size (mm) A B C D EE F I J K KA KK M MM N WF
ø12 34 27 5.5 10.5 M5 25 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6 5 6 15.5 3.5
SRL3
ø16 34 27 5.5 10.5 M5 29 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8 6 8 20 3.5
ø20 40 31 8 13 M5 36 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRG3
ø25 44 34 11 16 M5 40 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5

SRM3
● Dimensions of rod end male thread part
SRT3 Code a’ c’ H kk’ M MM T wf
Bore size (mm)
MRL2 ø12 10.5 9 8 M5 5 6 3.2 3.5
ø16 12 10 10 M6 6 8 3.6 3.5
MRG2 ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
SM‑25 *1: For dimensions of individual accessories, refer to pages 1046 to 1049.

ShkAbs

FJ

FK
Spd
Contr

Ending

932
 SSD2-DM Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● Axial foot (LB) without switch
SSD2-DM-12 to 25 -LB CMK2

Rod end male thread

A + (2 × stroke length)
CMA2
A + (2 × stroke length)
WF B + stroke length WF + stroke length SCM
N a’ wf B + stroke length wf + stroke length a’
M
SCG

SCA2
N
AG

AT
AH

SCS2
AU LF + stroke length
TR Low head hexagon socket LF
4-øAB AK
TS bolt 8-G
CKV2
LF LX + stroke length LF + stroke length
CAV2/
COVP/N2
Code Common dimensions SSD2
Bore size
AB AG AH AK AT AU G N TR TS M
(mm)
ø12 5 29.5 17 12.5 2 8 M4×10 15.5 34 44 4.8 SSG
ø16 5 33.5 19 13 2 8 M4×10 20 38 48 4.8
ø20 7 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 SSD
ø25 7 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2
Code Female thread Male thread CAT
Bore size
WF LF A B LX a’ wf LF A B LX
(mm)
ø12 13.5 19.5 54 27 15 10.5 13.5 19.5 75 27 15 MDC2
ø16 13.5 19.5 54 27 15 12 13.5 19.5 78 27 15
ø20 14.5 20.5 60 31 19 14 14.5 20.5 88 31 19 MVC
ø25 15 22.5 64 34 19 17.5 15 22.5 99 34 19

SMG

● Rod side flange (FA) without switch MSD/

SSD2-DM-12 to 25 -FA MSDG

FC*
Rod end male thread

FM A + (2 × stroke length)
A + (2 × stroke length) STK
FL WF1 B + stroke length WF2 + stroke length
a’ wf1 B + stroke length wf2 + stroke length a’
N FT SRL3
2-FD
SRG3
FH
N

SRM3

Mounting bolt 4-G SRT3

Hexagon socket button head bolt

MRL2
Code Common dimensions Female thread Male thread
Bore size MRG2
FD FH FL FM FT N G WF1 WF2 A B a’ wf1 wf2 A B
(mm)
ø12 4.5 25 45 55 5.5 15.5 M4×12 13.5 3.5 44 27 10.5 13.5 3.5 65 27
ø16 4.5 30 45 55 5.5 20 M4×12 13.5 3.5 44 27 12 13.5 3.5 68 27 SM‑25
ø20 6.6 39 48 60 8 25.5 M6×16 14.5 4.5 50 31 14 14.5 4.5 78 31
ø25 6.6 42 52 64 8 28 M6×16 15 5 54 34 17.5 15 5 89 34 ShkAbs

FJ

FK
Spd
Contr

Ending

933
 SSD2-DM Series
SCP*3
Dimensions
● SSD2-DML-32 to 63 (with switch) ● Rod end male thread
CMK2 A + (2 × stroke length)
F a’ wf
WF B + stroke length WF + stroke length c’
N
CMA2 8-J C D T

øMM
(Mounting hole) H RD 2-EE HD
SCM
KK
O

KK
SCG kk’
Width across

øMM
FB

flats M
G

N
F

SCA2 Width across flats H

SCS2

4.5
øI
M
øK

8-KA
CKV2 FA *6

CAV2/
COVP/N2 ● SSD2-DM-32 to 63 (without switch)

SSD2 F A + (2 × stroke length)

N WF B + stroke length WF + stroke length
8-J
SSG (Mounting hole) H D
C 2-EE
2
SSD KK
O

KK

CAT
øMM

øPh9
G

MDC2
N
F

MVC
øI

SMG M
øK

8-KA

MSD/ Note: The positions for the left and right widths across flats are unspecified.
MSDG Code Without switch Common dimensions with switch
Bore size (mm) A *2, *8 B *3, *8 A *2 B *3 C *10 D *10 EE *9 F FA *6 FB G H I J K KA KK
FC*
ø32 53.5(63.5) 39.5(49.5) 63.5 49.5 8(5.5) 18(20) Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13
ø40 54(64) 40(50) 64 50 12 12 Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
STK
ø50 56.5(66.5) 40.5(50.5) 66.5 50.5 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
ø63 58(68) 42(52) 68 52 13 13 Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15
SRL3
Switch dimensions
Code Common dimensions with switch
Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
SRG3
Bore size (mm) M MM N O P WF HD *4 RD *4 HD *4 RD *4 HD RD
ø32 14 16 34 4.5 21 7 20 9 20 9 21.5 10.5
SRM3 ø40 14 16 40 5 28 7 16.5 12 16.5 12 18 13.5
ø50 17 20 50 7 35 8 16.5 12.5 16.5 12.5 18 14
SRT3 ø63 17 20 60 7 35 8 18 13 18 13 19.5 14.5
*1 : Custom stroke length is available only for more than 50 mm stroke lengths.
MRL2 *2 : To calculate A + (2 x stroke length) when using a custom stroke length, apply “A + next longer standard stroke length + custom stroke length”. (Example) If the
custom stroke length is 70 mm, apply “A + standard stroke length 75 mm + custom stroke length 70 mm”.
*3 :
To calculate B + stroke length when using custom stroke length, apply the next longer standard stroke length instead of the custom stroke length.
MRG2 (Example) If the custom stroke length is 70 mm, apply the standard stroke length 75 mm.
*4 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*5 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
SM‑25 *6 :
Dimensions in ( ) of FA are for the radial lead wire.
*7 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*8 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
ShkAbs *9 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*10 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
*11 : The RD side can be identified with a mark on the port surface of the body.
FJ
● Dimensions of rod end male thread part
FK Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø32 23.5 20.5 22 M14×1.5 14 16 8 5
Contr ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5
Ending ø63 28.5 26 27 M18×1.5 17 20 11 5

934
 SSD2-DM Series
Double acting/double rod
Dimensions with mounting bracket SCP*3
● ‌Axial foot (LB)
SSD2-DM(L)-32 to 63-LB CMK2
Rod end male thread
A + (2 × stroke length) A + (2 × stroke length)
CMA2
WF B + stroke length WF + stroke length a’ wf B + stroke length wf + stroke length a’
M M
SCM

SCG
AG

AH SCA2
AT
AD
AE

AU AU
SCS2
N Low head hexagon
4-øAB AK socket bolt 4-G AK
TR CKV2
LF LX + stroke length LF + stroke length
TS LF LX + stroke length LF + stroke length
CAV2/
COVP/N2
Code Common dimensions
SSD2
Bore size
AB AD AE AG AH AK AT AU G N TR TS M
(mm)
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 SSG
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 SSD
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2
Code Female thread Male thread CAT
Bore size Without switch With switch Without switch With switch
WF LF a’ wf LF
(mm) A B LX A B LX A B LX A B LX MDC2
ø32 17 25 64.5(74.5) 30.5(40.5) 14.5(24.5) 74.5 40.5 24.5 23.5 15 23 107.5(117.5) 30.5(40.5) 14.5(24.5) 117.5 40.5 24.5
ø40 17 25 74(84) 40(50) 24(34) 84 50 34 23.5 15 23 117(127) 40(50) 24(34) 127 50 34 MVC
ø50 18 29.5 76.5(86.5) 40.5(50.5) 17.5(27.5) 86.5 50.5 27.5 28.5 15 26.5 127.5(137.59) 40.5(50.5) 17.5(27.5) 137.5 50.5 27.5
ø63 18 31 78(88) 42(52) 16(26) 88 52 26 28.5 15 28 129(139) 42(52) 16(26) 139 52 26 SMG
* Dimensions in ( ) are for stroke lengths of more than 50 mm.
MSD/
MSDG
● ‌Rod side flange (FA) FC*
SSD2-DM(L)-32 to 63-FA
Rod end male thread
STK
FM A + (2 × stroke length) A + (2 × stroke length)
FL WF1 B + stroke length WF2 + stroke length a’ wf1 B + stroke length wf2 + stroke length a’
N 4-FD SRL3
FT

SRG3
FC
FH

SRM3

Mounting bolt 4-G SRT3

ø32 to ø63: ‌Hexagon socket
button head bolt
ø80/ø100: Special bolt MRL2
Code Common dimensions
Bore size
MRG2
FC FD FH FL FM FT N G
(mm)
ø32 34 5.5 48 56 65 8 34 M6×16 SM‑25
ø40 40 5.5 54 62 72 8 40 M6×16
ø50 50 6.6 67 76 89 9 50 M8×20 ShkAbs
ø63 60 9 80 92 108 9 60 M10×25
Code Female thread Male thread FJ
Bore size Without switch With switch Without switch With switch
WF1 WF2 a’ wf1 wf2
(mm) A B A B A B A B FK
ø32 17 7 54.5(64.5) 30.5(40.5) 64.5 40.5 23.5 15 5 97.5(107.5) 30.5(40.5) 107.5 40.5
ø40 17 7 64(74) 40(50) 74 50 23.5 15 5 107(117) 40(50) 117 50
Spd
Contr
ø50 18 8 66.5(76.5) 40.5(50.5) 76.5 50.5 28.5 15 5 117.5(127.5) 40.5(50.5) 127.5 50.5
ø63 18 8 68(78) 42(52) 78 52 28.5 15 5 119(129) 42(52) 129 52
Ending
* Dimensions in ( ) are for stroke lengths of more than 50 mm.

935
 Compact cylinder double acting/single rod/rubber scraper

SSD2-G Series
SCP*3 ● Bore size: ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-G
Item
SSD2-GL (with switch)
SCA2 Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
+1.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion None
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MDC2
Stroke length Min. stroke length with switch (2 switches)
MVC Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) length (mm) length (mm) (mm)
SMG ø20 5/10/15/20/25 ø20
50
ø25 30/35/40/45/50 ø25
MSD/ ø32 5/10/15/20/25/30/ ø32
MSDG
ø40 35/40/45/50/75/100 ø40
1 5 5
FC* ø50 ø50
10/15/20/25 100
ø63 ø63
30/35/40/45/50
STK ø80 ø80
75/100
ø100 ø100
SRL3 *1: When using the type with switch, refer to the table of the min. stroke length with switch. *1: L
‌ ess than 10 mm with the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch is not available.
SRG3

SRM3 Custom stroke length

● SSD2 Series A + stroke length
SRT3
Standard products B + stroke length
Item
MRL2 Standard stroke length body with spacer
Model No. Refer to How to order.
MRG2 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
SM‑25 Bore size Stroke range
Stroke range 20 to 25 1 to 49
ShkAbs 32 to 100 1 to 99
Model No.: SSD2-G-32-38
FJ Example of model No. A +2 mm spacer is added to the SSD2-G-32-40 standard cylinder
to create 38 mm stroke length. B + stroke length is 63 mm.
FK
Spd
Contr

Ending

936
 SSD2-G Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Applications
Dedicated for For programmable Dedicated for For programmable CMA2
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCM
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green
SCG
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON)
SCA2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29
SCS2
Switch specifications (T type switch)
● 1-color/2-color display/for AC magnetic field proof CKV2
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4) CAV2/
T1H/T1V T0H/T0V T5H/T5V T8H/T8V COVP/N2
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT
For programmable Dedicated for programmable For programmable For programmable For programmable controller, For programmable controller, Dedicated for
Applications controller, relay,
compact solenoid valve controller controller, relay controller, relay
relay, IC circuit (no indicator
lamp), serial connection relay
programmable
controller
SSD2
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SSG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
SSD
LED LED Red/green Red/green LED Yellow Red/green Red/green Red/green
Indicator LED Without indicator LED
(Lit when (Lit when LED LED (Lit when LED LED LED LED
lamp
ON) ON) (Lit when ON) (Lit when ON) ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) lamp (Lit when ON)
(Lit when ON) CAT
Leakage ≤ 1 mA at 100 VAC,
1 mA or less 10 μA or less 0 mA 1 mA or less
current ≤ 2 mA at 200 VAC MDC2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 MVC
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. SMG
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) MSD/
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. MSDG
*5 : The F type switch uses a bend-resistant lead wire.
FC*
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
STK
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø20 108 163 120 195 133 208 146 221 158 233 171 246 184 259 197 272 210 285 223 298 - - - -
ø25 151 242 166 257 182 273 198 289 214 305 229 320 245 336 261 352 293 384 292 383 - - - - SRL3
ø32 230 344 252 366 274 388 296 410 317 431 339 453 361 475 383 497 427 519 426 540 487 648 707 755
ø40 301 444 328 471 354 497 381 524 408 551 434 577 461 604 487 630 540 657 540 683 625 816 890 948 SRG3
ø50 - - 513 707 555 749 597 791 639 833 682 876 734 918 766 960 890 1002 850 1044 787 1254 1307 1464
ø63 - - 733 1012 788 1067 843 1122 898 1177 953 1232 1009 1288 1064 1343 1175 1398 1174 1453 1384 1728 1939 2003
SRM3
ø80 - - 1532 1945 1619 2032 1705 2118 1792 2203 1878 2288 1965 2377 2052 2465 2226 2552 2225 2638 2564 3071 3434 3503
ø100 - - 2212 2779 2326 2893 2439 3006 2553 3120 2667 3234 2781 3348 2894 3461 3121 3575 3122 3689 3622 4259 4757 4829
SRT3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa MRL2
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 47.1 62.8 94.2 1.26 × 102 1.57 × 102 1.88 × 102 2.20 × 102 2.51 × 102 2.83 × 102 3.14 × 102 MRG2
ø20
Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102
Push - 73.6 98.2 1.47 × 102 1.96 × 102 2.45 × 102 2.95 × 102 3.44 × 102 3.93 × 102 4.42 × 102 4.91 × 102
ø25
Pull - 56.7 75.6 1.13 × 102 1.51 × 102 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
SM‑25
Push - 1.21 × 10 2
1.61 × 10 2
2.41 × 10 2
3.22 × 10 2
4.02 × 10 2
4.83 × 10 2
5.63 × 10 2
6.43 × 10 2
7.24 × 10 2
8.04 × 10 2
ø32
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102 ShkAbs
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103 FJ
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 102 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103
FK
ø63
Pull 2.80 × 10 2
4.20 × 10 2
5.61 × 10 2
8.41 × 10 2
1.12 × 10 3
1.40 × 10 3
1.68 × 10 3
1.96 × 10 3
2.24 × 10 3
2.52 × 10 3
2.80 × 10 3
Spd
Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103
ø80 Contr
Pull 4.54 × 10 2
6.80 × 10 2
9.07 × 10 2
1.36 × 10 3
1.81 × 10 3
2.27 × 10 3
2.72 × 10 3
3.17 × 10 3
3.63 × 10 3
4.08 × 10 3
4.54 × 10 3

Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103
ø100 Ending
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103

937
 SSD2-G Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-G 32 5 N LB I SSD2-G Double acting/single rod/rubber scraper
SSD2-GL Double acting/single rod/rubber scraper/with switch
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-GL 32 10 T0H R N LB I
20 ø20
SCM 25 ø25
32 ø32
A Model No. 40 ø40
SCG
50 ø50
63 ø63
SCA2 B Bore
80 ø80
size
100 ø100
SCS2 C Stroke length (mm)
C Stroke length
CKV2 Refer to the stroke length table on the following page.
CAV2/ D Switch model No.
COVP/N2 D Switch model No. Lead
Lead wire Lead wire Voltage Bore size

Contact
*1 Display
Straight L-shaped AC DC wire 20 25 32 40 50 63 80 100
SSD2 *2
- F2S* ● 2-wire ● ●
*5
- F3S* ● 3-wire ● ●
SSG *6 1-color display
● ●
Proximity
F2H* F2V* ● 2-wire
F3H* F3V* ● 3-wire ● ●
SSD E Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
2-color display
CAT F3YH* F3YV* ● 3-wire ● ●
F Option T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

MDC2 T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

T8H* T8V* ● ● 1-color display ● ● ● ● ●
G Mounting T1H* T1V* ● ● ● ● ● ● ● ● ●
MVC bracket 2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
*3 T3H* T3V* ● ● ● ● ● ● ● ● ●
SMG *8 T3PH* T3PV* ● 1-color display (PNP output)
3-wire
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
Proximity

T2WH* T2WV* ●
MSD/ 2-wire
MSDG T2YH* T2YV* ● ● ● ● ● ● ● ● ●
2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ●
3-wire
FC* T3YH* T3YV* ● ● ● ● ● ● ● ● ●
T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
2-wire
STK Precautions for model No. selection T2YDT* - ● AC magnetic field ● ● ● ● ● ● ● ●
T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
*1 : The T8* switch cannot be mounted on the ø20 to
SRL3 ø32 bore sizes. * Lead wire length
*2 : The F type switch can only be mounted on the piping Blank 1 m (standard)
port surface of bore sizes ø20 and ø25. 3 3 m (option)
SRG3 *3 : The mounting bracket is included at shipment. 5 5 m (option) *7
*4 : “I” and “Y” cannot be selected together.
SRM3 *5 : The F type switch with L type lead wire on ø20 E Switch quantity
models cannot be selected on stroke lengths of 15 R 1 on rod side
mm or under.
SRT3 H 1 on head side
*6 : Switches are shipped with the product. Contact CKD if
assembling before shipment is necessary. D 2
*7 : F type switch cannot be selected.
MRL2 F Option
*8 : The structure of bore sizes ø20 to ø32 does not
permit retrofitting of the foot bracket (LB) or flange Blank Rod end female thread
MRG2 bracket (FA) on the rod side. Assembly before N Rod end male thread
shipment is available as made to order.
G Mounting bracket
SM‑25 Blank Without mounting bracket
[Example of model No.]
LB Axial foot (made-to-order product)
ShkAbs SSD2-GL-20-10-T0H-R-N-LB-I CB Clevis bracket (pin and snap ring included)
Model: Compact cylinder rubber scraper FA Rod side flange (made-to-order product)
FJ ●
B Bore size : ø20 mm FB Head side flange
●
C Stroke length : 10 mm H Accessory (available when rod end male thread “N” is selected)
FK ●
D Switch model No. : Reed T0H switch/ H Accessory
I Rod eye
Lead wire length 1 m *4
Y Rod clevis (pin and snap ring included)
Spd ● E Switch quantity : 1 on rod side
Contr ●F Option : Rod end male thread
●
G Mounting bracket : Axial foot

Ending ●
H Accessory : Rod eye

938
 SSD2-G Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay, AC
magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 936 for the min. stroke length with switch.
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length. SSD

CAT

How to order switch MDC2

SW T0H MVC

SMG
Switch model No.
MSD/
(Item D on page 938) MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø20 ø25 ø32 ø40 ø50 ø63 ø80
Mounting bracket
Foot (LB) SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SRG3
Flange (FA/FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SRM3
Bore size (mm)
ø100 SRT3
Mounting bracket
Foot (LB) SSD2-LB-100
Flange (FA/FB) SSD2-FA-100
MRL2
Clevis bracket (CB) SSD2-CB-100
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.
*2: The structure of bore sizes ø20 to ø32 does not permit retrofitting of the foot bracket (LB) or flange bracket (FA) on the rod side. Contact CKD for details.
SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

939
 SSD2-G Series
SCP*3
Internal structure and parts list
● SSD2-GL-20, 25 ( double acting/single rod/rubber scraper/ ● SSD2-GL-32 (double acting/single rod/rubber scraper/
CMK2 with switch) with switch)

CMA2
1 14 2 15 3 4 5 6 7 8 9 11 10 12 1 14 15 2 3 5 4 6 7 8 9 11 10 12
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2
13

SSD2 13

SSG

SSD ● SSD2-G-20, 25 (double acting/single rod/rubber scraper) ● SSD2-G-32 (double acting/single rod/rubber scraper)

CAT
1 14 15 2 3 4 5 6 7 11 10 12 1 14 15 2 3 5 4 6 7 11 10 12 8

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK 13 Over 50 st

13
SRL3

SRG3

SRM3 No. Part name Material Remarks No. Part name Material Remarks
ø20, ø25: Stainless steel Industrial chrome 9 Magnet Plastic
1 Piston rod
SRT3 ø32: Steel plating 10 Piston Aluminum alloy Chromate
2 Scraper Nitrile rubber 11 Piston packing Nitrile rubber
MRL2 3 C type snap ring Stainless steel
12 Cover
ø20 to ø25: Stainless steel
ø32: Alumite
4 Rod packing Nitrile rubber ø32: Aluminum alloy

MRG2 5 Rod metal gasket Nitrile rubber 13 Hexagon socket head cap screw Stainless steel
6 Rod metal Special aluminum Alumite 14 Adaptor (A) Aluminum alloy Alumite
SM‑25 7 Body Aluminum alloy Hard alumite 15 Adaptor (B) Aluminum alloy Alumite
8 Spacer Aluminum alloy Chromate
ShkAbs
Repair parts list
FJ Part name
Kit No. Repair parts No.
Bore size (mm)
FK ø20 SSD2-G-20K
Spd ø25 SSD2-G-25K 2 4 5 11

Contr ø32 SSD2-G-32K

Ending

940
 SSD2-G Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-GL-40, 50 (‌ double acting/single rod/rubber scraper/ ● SSD2-GL-63 to 100 ‌(double acting/single rod/rubber scraper/
with switch) with switch) CMK2

CMA2
1 2 3 4 5 6 7 8 9 11 10 12 1 2 4 3 5 6 13 7 8 9 11 10 12
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-G-40, 50 (double acting/single rod/rubber scraper) ● SSD2-G-63 to 100 (double acting/single rod/rubber scraper) SSD

CAT
1 2 3 4 5 6 7 11 10 12 8 1 2 4 3 5 6 13 7 11 10 12 8

MDC2

MVC

SMG
MSD/
MSDG

FC*
Over 50 st
STK
Over 50 st
SRL3

SRG3

No. Part name Material Remarks No. Part name Material Remarks SRM3
1 Piston rod Steel Industrial chrome plating 7 Body Aluminum alloy Hard alumite
2 Scraper Nitrile rubber 8 Spacer Aluminum alloy Chromate SRT3
3 C type snap ring Stainless steel 9 Magnet Plastic
4 Rod packing Nitrile rubber 10 Piston Aluminum alloy Chromate MRL2
5 Rod metal gasket Nitrile rubber 11 Piston packing Nitrile rubber

6 Rod metal
ø40, ø50: Special aluminum ø40, ø50: Alumite 12 Cover Aluminum alloy Alumite MRG2
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 13 Bush Oiles drymet ø63 to ø100 only
SM‑25
Repair parts list
Part name
ShkAbs
Kit No. Repair parts No.
Bore size (mm)
ø40 SSD2-G-40K
FJ
ø50 SSD2-G-50K
FK
ø63 SSD2-G-63K 2 4 5 11

ø80 SSD2-G-80K Spd

ø100 SSD2-G-100K Contr

Ending

941
 SSD2-G Series
SCP*3
Dimensions
● SSD2-G(L)
CMK2 ● Rod end male thread
A + stroke length a’ wf
CMA2 ø20/ø25
B + stroke length c’
WF 10 Q + stroke length T
SCM 6-J
Mounting hole F C D

øMM
N HD 2-EE
KK
SCG

SCA2
øMM
FB
N
F

SCS2 KK’ Width across flats M

Width across flats H
øK
øI
CKV2 M RD 8-KA
FA
CAV2/
COVP/N2 ø32 ø40 to ø100

SSD2 A + stroke length F A + stroke length

WF B + stroke length N WF B + stroke length
8-J
6-J F 10 Q + stroke length Mounting hole 2-EE
SSG Mounting hole N
H 5 C D
C D 2-EE HD
H KK
KK HD
O

SSD
O

CAT

øMM
G

FB

øU
øMM

N
F
G

FB
N
F

MDC2

MVC øK M M

øI
øI

øK

RD RD 8-KA
8-KA
FA FA

SMG
MSD/
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
MSDG length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
FC* *3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*4 : Dimensions in ( ) of codes A, B and Q are for stroke lengths of more than 50 mm.
STK *5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*6 : Dimensions in ( ) of FA are for the radial lead wire.
*7 : Dimensions in ( ) of code J are for the rod side mounting hole.
SRL3 Code Dimensions without switch Common dimensions with switch
Bore size (mm) A *1, *4 B *1, *4 Q A *1 B *1 Q C D EE *5 F FA *6 FB G H I J K KA KK
SRG3 ø20 34 29.5 19.5 44 39.5 29.5 18 5.5 M5 36 18.5(22) 12.5 - - 5.5 9 spot face depth 5.5 (15.5) 47 M6 depth 11 M5 depth 7
ø25 37.5 32.5 22.5 47.5 42.5 32.5 21 6 M5 40 20.5(24) 13.5 - - 5.5 9 spot face depth 5.5 (15.5) 51 M6 depth 11 M6 depth 12
SRM3 ø32 40(50) 33(43) 23(33) 50 43 33 18 8 Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 9 spot face depth 5.5 (15.5) 60 M6 depth 11 M8 depth 13
ø40 46.5(56.5) 29.5(39.5) - 56.5 39.5 - 12 8.5 Rc1/8 52 26.5(30) 27.5 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
SRT3 ø50 48.5(58.5) 30.5(40.5) - 58.5 40.5 - 10.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
ø63 54(64) 36(46) - 64 46 - 13 11 Rc1/4 77 39(42.5) 28.5 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15
MRL2 ø80 63.5(73.5) 43.5(53.5) - 73.5 53.5 - 16 13 Rc3/8 98 49.5(53) 28.5 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21
ø100 75(85) 53(63) - 85 63 - 23 15 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27
MRG2 Proximity Proximity F2H/F2V, Proximity Dimensions of rod end male thread part
Code Common dimensions with switch Reed T0H/ Proximity T2H/
T2WH/T2WV, F3H/F3V, F2YH /
Bore size T0V, T5H/T5V T2V, T3H/T3V T3WH/T3WV F2YV, F3YH F3YV F2S/F3S
SM‑25 M MM N O U WF a’ c’ H KK’ M MM T wf
(mm) HD RD HD RD HD RD HD RD HD RD
ø20 8 10 25.5 - - 4.5 3 17.5 3 17.5 5 19.5 7.5 22 6.5 21 14 12 13 M8 8 10 5 4.5
ShkAbs
ø25 10 12 28 - - 5 4 19.5 4 19.5 6 21.5 8.5 24 7.5 23 17.5 15 17 M10×1.25 10 12 6 5
ø32 14 16 34 4.5 - 7 4 19.5 4 19.5 6 21.5 23.5 20.5 22 M14×1.5 14 16 8 5
FJ
ø40 14 16 40 5 28 17 7 12 7 12 8.5 13.5 23.5 20.5 22 M14×1.5 14 16 8 15
ø50 17 20 50 7 35 18 7.5 12.5 7.5 12.5 9 14 28.5 26 27 M18×1.5 17 20 11 15
FK
ø63 17 20 60 7 35 18 12.5 13 12.5 13 14 14.5 28.5 26 27 M18×1.5 17 20 1 15
Spd ø80 22 25 77 6 43 20 17.5 15.5 17.5 15.5 19 17 35.5 32.5 32 M22×1.5 22 25 13 18
Contr ø100 27 30 94 6.5 59 22 23 19.5 23 19.5 24.5 21 35.5 32.5 41 M26×1.5 27 30 16 18

Ending

942
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

943
 SSD2-G Series
SCP*3
Dimensions with mounting bracket
● Clevis bracket (CB)
CMK2 SSD2-G(L)-20 to 100 -CB

CMA2 · ø20/ø25 · ø32 to ø100

SCM A + stroke length UB-0.1

-0.3 A + stroke length UB-0.1
-0.3

WF B + stroke length D WF B + stroke length D CB+0.2

0
CB+0.2
0 CC
SCG CC H

MR
SCA2 R
øCA

N
E
N
E
SCS2

CD
CD

H1
0
AC
H1

N
CKV2
0

CJ + stroke length Mounting bolt 4-C N

Mounting bolt 4-C CJ + stroke length
E E
CAV2/
COVP/N2

SSD2

SSG Rod end male thread

Rod end male thread

SSD A + stroke length

A + stroke length
a’ wf B + stroke length
a’ wf B + stroke length
CAT

MDC2

MVC
CJ + stroke length
CJ + stroke length
SMG
MSD/
MSDG

FC* Code Common dimensions

Bore size
AC CA CB CC CD D E G MR N UB
STK (mm)
ø20 - 20 8.2 12 8 5 36 M6×16 - 25.5 16
SRL3 ø25 - 24 10.2 14 10 5 40 M6×16 - 28 20
ø32 4.5 - 18.2 14 10 5 45 M6×16 10 34 36
SRG3 ø40 5 - 18.2 14 10 6 52 M6×16 10 40 36
ø50 6 - 22.2 20 14 7 64 M8×20 14 50 44
SRM3 ø63 7 - 22.2 20 14 8 77 M10×25 14 60 44
ø80 9 - 28.2 27 18 10 98 M12×40 18 77 56
SRT3 ø100 12 - 32.2 31 22 13 117 M12×40 22 94 64
Code Female thread Male thread
MRL2 Bore size Without switch With switch Without switch With switch
WF a’ wf
(mm) A B CJ A B CJ A B CJ A B CJ
MRG2 ø20 4.5 61 29.5 52 71 39.5 62 14 4.5 75 29.5 52 85 39.5 62
ø25 5 67.5 32.5 57.5 77.5 42.5 67.5 17.5 5 85 32.5 57.5 95 42.5 67.5
SM‑25 ø32 7 70 33 60 80 43 70 23.5 5 91.5 33 58 101.5 43 68
ø40 17 78.5 29.5 68.5 88.5 39.5 78.5 23.5 15 100 29.5 66.5 110 39.5 76.5
ShkAbs ø50 18 90.5 30.5 76.5 100.5 40.5 86.5 28.5 15 116 30.5 73.5 126 40.5 83.5
ø63 18 98 36 84 108 46 94 28.5 15 123.5 36 81 133.5 46 91
FJ ø80 20 119.5 43.5 101.5 129.5 53.5 111.5 35.5 18 153 43.5 99.5 163 53.5 109.5
ø100 22 142 53 120 152 63 130 35.5 18 173.5 53 116 183.5 63 126
FK
Spd
Contr

Ending

944
 SSD2-G Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Head side flange (FB)
SSD2-G(L)-20 to 100 -FB CMK2

· ø20/ø25 · ø32 to ø100 CMA2

FM FM
A + stroke length FL
A + stroke length FL SCM
WF B + stroke length FT N 4-FD
WF B + stroke length FT N
SCG
2-FD
SCA2
FH

FC
FH
N

SCS2

Mounting bolt 4-G CKV2

Hexagon socket button head bolt Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt CAV2/
ø80/ø100: Special bolt
COVP/N2

SSD2
Rod end male thread
Rod end male thread
SSG
A + stroke length
A + stroke length
a’ wf B + stroke length FT SSD
a’ wf B + stroke length FT

CAT

MDC2

MVC

SMG
MSD/
MSDG

Code Common dimensions Female thread Male thread FC*

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B STK
ø20 - 6.6 39 48 60 8 25.5 M6×16 4.5 42 29.5 52 39.5 14 4.5 56 29.5 66 39.5
ø25 - 6.6 42 52 64 8 28 M6×16 5 45.5 32.5 55.5 42.5 17.5 5 63 32.5 73 42.5 SRL3
ø32 34 5.5 48 56 65 8 34 M6×16 7 48 33 58 43 23.5 5 69.5 33 79.5 43
ø40 40 5.5 54 62 72 8 40 M6×16 17 54.5 29.5 64.5 39.5 23.5 15 76 29.5 86 39.5 SRG3
ø50 50 6.6 67 76 89 9 50 M8×20 18 57.5 30.5 67.5 40.5 28.5 15 83 30.5 93 40.5
ø63 60 9 80 92 108 9 60 M10×25 18 63 36 73 46 28.5 15 88.5 36 98.5 46 SRM3
ø80 77 11 99 116 134 11 77 M12×40 20 74.5 43.5 84.5 53.5 35.5 18 108 43.5 118 53.5
ø100 94 11 117 136 154 11 94 M12×40 22 86 53 96 63 35.5 18 117.5 53 127.5 63 SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

945
 Compact cylinder Double acting/coolant proof

SSD2-G2/G3 Series
SCP*3 ● Bore size: ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-G2/G3
Item
SSD2-G2L/G3L (with switch)
SCA2 Bore size mm ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 (*1) Rc1/4 Rc3/8
+1.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion None
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
*1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
CAT
Stroke length
MDC2
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø16 5/10/15/20/25/30 30
MVC
ø20 5/10/15/20/25/
50
SMG ø25 30/35/40/45/50
1(10)
ø32 5/10/15/20/25/30/
MSD/ 100 The value in ( ) is for
ø40 35/40/45/50/75/100
MSDG types with one or two
ø50
10/15/20/25/ switches.
FC* ø63
30/35/40/45/ 100
ø80
STK 50/75/100
ø100

SRL3
Custom stroke length
SRG3 ● SSD2-G2/G3 Series
Standard products A + stroke length
SRM3 Item
Standard stroke length body with spacer B + stroke length
Model No. Refer to How to order.
SRT3 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
MRL2
Bore size Stroke range
16 1 to 29
MRG2 Stroke range
20 to 25 1 to 49
SM‑25 32 to 100 1 to 99
Model No.: SSD2-G2-32-38
ShkAbs Example of model No. A +2 mm spacer is added to the SSD2-G2-32-40 standard cylinder
to create 38 mm stroke length. B + stroke length is 73 mm.
FJ

FK
Spd
Contr

Ending

946
 SSD2-G2/G3 Series
Specifications
Switch specifications SCP*3
● Proximity switch
Model No. Proximity/2-wire Proximity/3-wire
CMK2
Item T2YLH/T2YLV T3YLH/T3YLV
Applications Dedicated for programmable controller Programmable controller, relay
CMA2
Power supply voltage - 10 to 28 VDC
Load voltage/current 10 to 30 VDC, 5 to 20 mA *1 30 VDC or less, 50 mA or less
Indicator lamp Red/green LED (Lit when ON) SCM
Leakage current 1 mA or less 10 μA or less
Max. shock resistance 980 m/S2 SCG
Weight g 1 m:33 3 m:87 5 m:142
*1 : The above max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. SCA2
(5 to 10 mA at 60˚C)
*2 : Refer to Ending Page 1 for other switch specifications.
SCS2

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) CKV2
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
CAV2/
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
COVP/N2
ø16 62 118 73 118 83 158 94 139 105 150 116 161 - - - - - - - - - - - -
ø20 108 163 120 195 133 208 146 221 158 233 171 246 184 259 197 272 210 285 223 298 - - - - SSD2
ø25 151 242 166 257 182 273 198 289 214 305 229 320 245 336 261 352 293 384 292 383 - - - -
ø32 230 344 252 366 274 388 296 410 317 431 339 453 361 475 383 497 427 519 426 540 487 648 707 755 SSG
ø40 301 444 328 471 354 497 381 524 408 551 434 577 461 604 487 630 540 657 540 683 625 816 890 948
ø50 - - 513 707 555 749 597 791 639 833 682 876 734 918 766 960 890 1002 850 1044 787 1254 1307 1464
SSD
ø63 - - 733 1012 788 1067 843 1122 898 1177 953 1232 1009 1288 1064 1343 1175 1398 1174 1453 1384 1728 1939 2003
CAT
ø80 - - 1532 1945 1619 2032 1705 2118 1792 2203 1878 2288 1965 2377 2052 2465 2226 2552 2225 2638 2564 3071 3434 3503
ø100 - - 2212 2779 2326 2893 2439 3006 2553 3120 2667 3234 2781 3348 2894 3461 3121 3575 3122 3689 3622 4259 4757 4829
MDC2

Theoretical thrust table (Unit: N) MVC

Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SMG
Push - 30.2 40.2 60.3 80.4 1.01 × 10 1.21 × 10 1.41 × 10 1.61 × 10 1.81 × 10 2.01 × 10
2 2 2 2 2 2
MSD/
ø16
Pull - 22.6 30.2 45.2 60.3 75.4 90.5 1.06 × 102 1.21 × 102 1.36 × 102 1.51 × 102 MSDG
Push - 47.1 62.8 94.2 1.26 × 102 1.57 × 102 1.88 × 102 2.20 × 102 2.51 × 102 2.83 × 102 3.14 × 102
ø20 FC*
Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102
Push - 73.6 98.2 1.47 × 102 1.96 × 102 2.45 × 102 2.95 × 102 3.44 × 102 3.93 × 102 4.42 × 102 4.91 × 102 STK
ø25
Pull - 56.7 75.6 1.13 × 102 1.51 × 102 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
Push - 1.21 × 102 1.61 × 102 2.41 × 102 3.22 × 102 4.02 × 102 4.83 × 102 5.63 × 102 6.43 × 102 7.24 × 102 8.04 × 102 SRL3
ø32
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103 SRG3
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103 SRM3
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 102 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103 SRT3
ø63
Pull 2.80 × 10 4.20 × 10 5.61 × 10 8.41 × 10 1.12 × 10 1.40 × 10 1.68 × 10 1.96 × 10 2.24 × 10 2.52 × 10 2.80 × 10
2 2 2 2 3 3 3 3 3 3 3

MRL2
Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103
ø80
Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103
MRG2
Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103
ø100
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103 SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

947
 SSD2-G2/G3 Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Degree of protection level
CMK2 SSD2 G2 20 30 N LB I G2 Coolant proof scraper + packing NBR
G3 Coolant proof scraper + packing FKM
With switch (built-in magnet for switch)
G2L Coolant proof scraper + packing NBR, with switch
CMA2 SSD2 G2L 20 30 T2YLH R N LB I G3L Coolant proof scraper + packing FKM, with switch

SCM
B Bore size (mm)
A Degree of 16 ø16
protection level 20 ø20
SCG
25 ø25
32 ø32
SCA2 B Bore size 40 ø40
50 ø50
SCS2 63 ø63
80 ø80
CKV2 100 ø100

CAV2/
C Port thread
C Port thread
COVP/N2 Blank Rc thread
NN NPT thread (ø32 and over) (made-to-order product)
SSD2 GN G thread (ø32 and over) (made-to-order product)
D Stroke length (mm)
SSG D Stroke length
Refer to the stroke length table on the following page.
SSD E Switch model No.
E Switch model No. Lead wire Lead wire Lead

Proximity Contact

Voltage
CAT *1 Straight L-shaped
Display
wire
*6
T2YLH* T2YLV* 2-wire
MDC2 DC 2-color display
T3YLH* T3YLV* 3-wire
* Lead wire length
MVC Blank 1 m (standard)
3 3 m (option)
SMG 5 5 m (option)

MSD/ F Switch quantity

F Switch quantity
MSDG R 1 on rod side
H 1 on head side
FC* D 2
G Option
STK G Option
Blank Rod end female thread
Precautions for model No. selection N Rod end male thread
SRL3
*1 : The F type switch can only be mounted on the piping port H Mounting bracket
surface of bore sizes ø20 and ø25. H Mounting Blank Without mounting bracket
SRG3 *2 : The mounting bracket is included at shipment. bracket LB Axial foot (made-to-order product)
*3 : The structure of bore sizes ø16 to ø32 does not permit *2
CB Clevis bracket (pin and snap ring included)
retrofitting of the foot bracket (LB) or flange bracket (FA) on *3
SRM3 the rod side. Assembly before shipment is available as FA Rod side flange (made-to-order product)
made to order. FB Head side flange
SRT3 *4 : “I” and “Y” cannot be selected together.
I Accessory (available when rod end male thread “N” is selected)
*5 : Refer to pages 750 and 751 for combinations of I Accessory I Rod eye
variations/options.
MRL2 *6 : Switches are shipped with the product. Contact CKD if *4 Y Rod clevis (pin and snap ring included)
assembling before shipment is necessary.
MRG2
[Example of model No.]
SM‑25 SSD2-G2L-32-30-T2YLH-R-N
Model: Compact cylinder
ShkAbs ●
A Degree of protection level : Coolant proof scraper +
packing NBR, with switch
FJ ●
B Bore size : ø32 mm
●
C Port thread : Rc thread
FK ●
D Stroke length : 30 mm
●
E Switch model No. : Proximity switch T2YLH,

Spd lead wire 1 m

Contr ●
F Switch quantity : 1 on rod side
●
G Option : Rod end male thread
●
Ending H Mounting bracket : Axial foot

948
 SSD2-G2/G3 Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
16 20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 30 50 100
Custom stroke length *2 SSD2
*1 : Less than 10 mm stroke length is not available.
Refer to page 946 for the min. stroke length with switch. SSG
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard stroke length.

SSD

CAT

How to order switch MDC2

SW T2YLH MVC

SMG
Switch model No.
MSD/
(Item E on page 948) MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø16 ø20 ø25 ø32 ø40 ø50 ø63
Mounting bracket
Foot (LB) SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SRG3
Flange (FA/FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63
Clevis bracket (CB) SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SRM3
Bore size (mm)
ø80 ø100 SRT3
Mounting bracket
Foot (LB) SSD2-LB-80 SSD2-LB-100
Flange (FA/FB) SSD2-FA-80 SSD2-FA-100
MRL2
Clevis bracket (CB) SSD2-CB-80 SSD2-CB-100
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.
*2: The structure of bore sizes ø16 to ø32 does not permit retrofitting of the foot bracket (LB) or flange bracket (FA) on the rod side. Contact CKD for details.
SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

949
 SSD2-G2/G3 Series
SCP*3
Internal structure and parts list
● Degree of protection: Packing NBR SSD2-G2/G2L
CMK2 Packing FKM SSD2-G3/G3L

CMA2 ● SSD2-G23 -16 (without switch) ● SSD2-G23 L-16 (with switch)

2 3 5 6 8 7 9 10 13 14 15 2 3 5 6 8 7 9 10 11 12 14 13 15
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
1
COVP/N2 1

SSD2
● SSD2-G23 -20, 25 (without switch) ● SSD2-G23 L-20, 25 (with switch)

SSG 2 3 4 5 6 8 7 9 10 14 13 15 2 3 4 5 6 7 8 9 10 11 12 14 13 15

SSD

CAT

MDC2

MVC Female thread

SMG 1 1

MSD/
MSDG
● SSD2-G23 -32 (without switch) ● SSD2-G23 L-32 (with switch)
FC*
2 3 4 5 6 8 7 9 10 14 13 15 11 2 3 4 5 6 7 8 9 10 11 12 14 13 15

STK

SRL3

SRG3

SRM3
Female thread
SRT3
Over 50 st
MRL2 1 1

MRG2 ● SSD2-G23 -40, 50 (without switch) ● SSD2-G23 L-40, 50 (with switch)

2 5 6 7 8 9 10 14 13 15 11 2 5 6 7 8 9 10 11 12 14 13 15
SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending
Over 50 st
950
 SSD2-G2/G3 Series
Internal structure and parts list
Internal structure and parts list SCP*3
● Degree of protection: Packing NBR SSD2-G2/G2L
Packing FKM SSD2-G3/G3L CMK2

● SSD2-G23 -63 to 100 (without switch) ● SSD2-G23 L-63 to 100 (with switch) CMA2
2 5 6 7 8 9 16 10 13 14 15 11 2 5 7 6 16 8 9 10 11 12 14 13 15
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
Female thread Female thread COVP/N2
Over 50 st
SSD2

Main parts list SSG

No. Part name Material Remarks No. Part name Material Remarks
1 Hexagon socket head cap screw Stainless steel ø16 to ø32 only ø16 to ø50: Special aluminum ø16 to ø50: Alumite SSD
9 Rod metal
2 Piston rod Stainless steel Industrial chrome plating ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate
3 Adaptor (A) Aluminum alloy Alumite: ø16 to ø32 only 10 Body Aluminum alloy Hard alumite CAT
4 Adaptor (B) Aluminum alloy Alumite: ø16 to ø32 only 11 Spacer Aluminum alloy Chromate

5 Scraper
G2 Nitrile rubber 12 Magnet Plastic MDC2
G3 Fluoro rubber 13 Piston Aluminum alloy Chromate
6 C type snap ring Stainless steel
14 Piston packing
G2 Nitrile rubber MVC
G2 Nitrile rubber G3 Fluoro rubber
7 Rod packing
G3 Fluoro rubber
15 Cover
ø16 to ø25: Stainless steel
Alumite: ø32 to ø100
SMG
G2 Nitrile rubber ø32 to ø100: Aluminum alloy
8 Rod metal gasket MSD/
G3 Fluoro rubber 16 Bush Oiles drymet ø63 to ø100 only
MSDG

Repair parts list FC*

Part name
Kit No. Repair parts No. STK
Bore size (mm)
SSD2-G2-16K
ø16 SRL3
SSD2-G3-16K
SSD2-G2-20K
ø20 SRG3
SSD2-G3-20K
SSD2-G2-25K
ø25 SRM3
SSD2-G3-25K
SSD2-G2-32K
ø32 SRT3
SSD2-G3-32K
SSD2-G2-40K
ø40 5 7 8 14 MRL2
SSD2-G3-40K
SSD2-G2-50K
ø50 MRG2
SSD2-G3-50K
SSD2-G2-63K
ø63 SM‑25
SSD2-G3-63K
SSD2-G2-80K
ø80 ShkAbs
SSD2-G3-80K
SSD2-G2-100K
ø100 FJ
SSD2-G3-100K
Note: Specify the kit No. when placing an order.
FK
Spd
Contr

Ending

951
 SSD2-G2/G3 Series
SCP*3
Dimensions
● Degree of protection: Packing NBR
CMK2 SSD2-G2/G2L
● Degree of protection: Packing FKM
CMA2 SSD2-G3/G3L
● Rod end male thread
SCM A + stroke length
ø16 ø20/ø25
B + stroke length
a’ wf
WF 10 Q + stroke length
SCG 6-J F c’
Mounting hole F C D
N T
SCA2 N KK HD 2-EE

SCS2

øMM
FB
F
N

øMM
FB
N
F

CKV2
FA

Width across
CAV2/ øK 6-J
kk’ flats M
M
COVP/N2 øK

øI
M Mounting hole RD 8-KA Width across flats H
FB
FA FA
SSD2
ø32 ø40 to ø100
SSG A + stroke length F A + stroke length
WF B + stroke length N WF B + stroke length
SSD F 10 Q + stroke length 2-EE
H 8-J mounting hole 5 C D
N D 2-EE HD
C
0

CAT H HD KK
0

KK
MDC2

øMM
FB

øU
øMM

N
F
G

FB
F
N

MVC

6-J
SMG
øK M Mounting hole M
øI

øI
8-KA
øK

RD 8-KA RD
FA
MSD/ FA
MSDG *1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
FC* *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*4 : Dimensions in ( ) of codes A, B and Q are for stroke lengths of more than 50 mm.
STK
*5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.
*6 : Dimensions in ( ) of code J are for the spot face of rod side mounting hole.
SRL3 Code Dimensions without switch Common dimensions with switch
Bore size (mm) A *1, *4 B *1, *4 Q A *1 B *1 Q C D EE *5 F FA FB G H I J K KA KK
SRG3 ø16 35.5 27 17 40.5 32 22 15.5 5.5 M5 29 20.5 8 - - 3.5 6.5 spot face depth 3.5 (13.4) 38 M4 depth 7 M4 depth 8
ø20 39 29.5 19.5 49 39.5 29.5 18 5.5 M5 36 24.5 16 - - 5.5 9 spot face depth 5.5 (15.5) 47 M6 depth 11 M5 depth 7
SRM3 ø25 42.5 32.5 22.5 52.5 42.5 32.5 21 6 M5 40 26.5 17 - - 5.5 9 spot face depth 5.5 (15.5) 51 M6 depth 11 M6 depth 12
ø32 45(55) 33(43) 23(33) 55 43 33 18 8 Rc1/8 45 29 24 49.5 12.5 5.5 9 spot face depth 5.5 (15.5) 60 M6 depth 11 M8 depth 13
SRT3 ø40 46.5(56.5) 29.5(39.5) - 56.5 39.5 - 12 8.5 Rc1/8 52 32.5 31 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
ø50 48.5(58.5) 30.5(40.5) - 58.5 40.5 - 10.5 10.5 Rc1/4 64 38.5 32 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
MRL2 ø63 54(64) 36(46) - 64 46 - 13 11 Rc1/4 77 45 32 84 23 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15
ø80 63.5(73.5) 43.5(53.5) - 73.5 53.5 - 16 13 Rc3/8 98 55.5 32 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21
MRG2 ø100 75(85) 53(63) - 85 63 - 23 15 Rc3/8 117 65 32 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27
Code Common dimensions with switch Proximity T2YLH, Dimensions of rod end male thread part
SM‑25
Bore size T2YLV, T3YLH, T3YLV
M MM N O U WF a’ c’ H KK’ M MM T wf
(mm) RD HD
ShkAbs
ø16 6 8 20 - - 8.5 1.5 0 12 10 10 M6 6 8 3.6 8.5
ø20 8 10 25.5 - - 9.5 16.5 2 14 12 13 M8 8 10 5 9.5
FJ
ø25 10 12 28 - - 10 18.5 3 17.5 15 17 M10×1.25 10 12 6 10
ø32 14 16 34 4.5 - 12 19 3 23.5 20.5 22 M14×1.5 14 16 8 10
FK
ø40 14 16 40 5 28 17 12 6.5 23.5 20.5 22 M14×1.5 14 16 8 15
Spd ø50 17 20 50 7 35 18 12 7.5 28.5 26 27 M18×1.5 17 20 11 15
Contr ø63 17 20 60 7 35 18 12.5 12.5 28.5 26 27 M18×1.5 17 20 11 15
ø80 22 25 77 6 43 20 15 17.5 35.5 32.5 32 M22×1.5 22 25 13 18
Ending ø100 27 30 94 6.5 59 22 19 23 35.5 32.5 41 M26×1.5 27 30 16 18

952
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

953
 SSD2-G2/G3 Series
SCP*3
Dimensions with mounting bracket
● Clevis bracket (CB)
CMK2 SSD2-G2(L)/G3(L)-16 to 100 -CB

CMA2 · ø16 to ø25 · ø32 to ø100

A + stroke length UB A + stroke length UB
SCM WF B + stroke length D WF B + stroke length D CB
CB CC
CC H
SCG
R
MR

SCA2
øCA

E
N
N
E

CD
CD

H1
SCS2

0
AC
H1

N
CJ + stroke length N
0

CJ + stroke length Mounting bolt 4-C

Mounting bolt 4-C E E
CKV2
CAV2/
COVP/N2
Rod end male thread Rod end male thread
SSD2 A + stroke length A + stroke length
a’ wf B + stroke length a’ wf B + stroke length

SSG

SSD

CAT CJ + stroke length

CJ + stroke length

MDC2

MVC

SMG
MSD/
MSDG

FC* Code Common dimensions

Bore size
AC CA CB CC CD D E G H MR N UB
STK (mm)
ø16 - 15 6.6 +00.3 8 5 5 29 M4×12 C2 - 20 12
SRL3 ø20 - 20 8.2 +00.2 12 8 5 36 M6×16 C4 - 25.5 16
ø25 - 24 10.2 +00.2 14 10 5 40 M6×16 C5 - 28 20
SRG3 ø32 4.5 - 18.2 +00.2 14 10 5 45 M6×16 - 10 34 36
ø40 5 - 18.2 +00.2 14 10 6 52 M6×16 - 10 40 36
SRM3 ø50 6 - 22.2 +00.2 20 14 7 64 M8×20 - 14 50 44
ø63 7 - 22.2 +00.2 20 14 8 77 M10×25 - 14 60 44
SRT3 ø80 9 - 28.2 +00.2 27 18 10 98 M12×40 - 18 77 56
ø100 12 - 32.2 +00.2 31 22 13 117 M12×40 - 22 94 64
MRL2 Code Female thread Male thread
Bore size Without switch With switch Without switch With switch
MRG2 WF a’ wf
(mm) A B CJ A B CJ A B CJ A B CJ
ø16 8.5 56.5 27 50.5 61.5 32 55.5 12 8.5 68.5 27 50.5 73.5 32 55.5
SM‑25 ø20 9.5 66 29.5 57 76 39.5 67 14 9.5 80 29.5 57 90 39.5 67
ø25 10 72.5 32.5 62.5 82.5 42.5 72.5 17.5 10 90 32.5 62.5 100 42.5 72.5
ShkAbs ø32 12 75 33 65 85 43 75 23.5 10 96.5 33 63 106.5 43 73
ø40 17 78.5 29.5 68.5 88.5 39.5 78.5 23.5 15 100 29.5 66.5 110 39.5 76.5
FJ ø50 18 90.5 30.5 76.5 100.5 40.5 86.5 28.5 15 116 30.5 73.5 126 40.5 83.5
ø63 18 98 36 84 108 46 94 28.5 15 123.5 36 81 133.5 46 91
FK ø80 20 119.5 43.5 101.5 129.5 53.5 111.5 35.5 18 153 43.5 99.5 163 53.5 109.5
ø100 22 142 53 120 152 63 130 35.5 18 173.5 53 116 183.5 63 126
Spd
Contr

Ending

954
 SSD2-G2/G3 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Head side flange (FB)
SSD2-G2(L)/G3 (L)-20 to 100-FB CMK2

· ø16 to ø25 · ø32 to ø100 CMA2

FM FM
A + stroke length A + stroke length FL SCM
FL
WF B + stroke length FT N 4-FD
WF B + stroke length FT N
SCG
2-FD

SCA2

FC
FH
FH
N

SCS2
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt CKV2
ø80/ø100: Special bolt
CAV2/
COVP/N2
Rod end male thread
Rod end male thread
A + stroke length A + stroke length
SSD2
a’ wf B + stroke length FT a’ wf B + stroke length FT
SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

Code Common dimensions Female thread Male thread FC*

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT G N WF a' wf
(mm) A B A B A B A B STK
ø16 - 4.5 30 45 55 5.5 M4×12 20 8.5 41 27 46 32 12 8.5 53 27 58 32
ø20 - 6.6 39 48 60 8 M6×16 25.5 9.5 47 29.5 57 39.5 14 9.5 61 29.5 71 39.5 SRL3
ø25 - 6.6 42 52 64 8 M6×16 28 10 50.5 32.5 60.5 42.5 17.5 10 68 32.5 78 42.5
ø32 34 5.5 48 56 65 8 M6×16 34 12 53 33 63 43 23.5 10 74.5 33 84.5 43 SRG3
ø40 40 5.5 54 62 72 8 M6×16 40 17 54.5 29.5 64.5 39.5 23.5 15 76 29.5 86 39.5
ø50 50 6.6 67 76 89 9 M8×20 50 18 57.5 30.5 67.5 40.5 28.5 15 83 30.5 93 40.5 SRM3
ø63 60 9 80 92 108 9 M10×25 60 18 63 36 73 46 28.5 15 88.5 36 98.5 46
ø80 77 11 99 116 134 11 M12×40 77 20 74.5 43.5 84.5 53.5 35.5 18 108 43.5 118 53.5 SRT3
ø100 94 11 117 136 154 11 M12×40 94 22 86 53 96 63 35.5 18 117.5 53 127.5 63
MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

955
 Compact cylinder double acting/high load/coolant proof

SSD2-KG2/KG3 Series
SCP*3 ● Bore size: ‌ø16/ø20/ø25/ø32/ø40/ø50
CMK2
ø63/ø80/ø100
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-KG2/KG3
Item
SSD2-KG2L/KG3L (with switch)
SCA2 Bore size mm ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5×0.8 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion Rubber cushion
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.09 0.16 0.16 0.4 0.63 0.98 1.56 2.51 3.92
CAT

MDC2
Stroke length
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
MVC ø16 5/10/15/20/25/30 30
ø20 5/10/15/20/25/
50
SMG ø25 30/35/40/45/50
1(10)
ø32 5/10/15/20/25/30/
MSD/ 100 The value in ( ) is for
MSDG ø40 35/40/45/50/75/100
types with one or two
ø50
FC* 10/15/20/25/ switches.
ø63
30/35/40/45/ 100
ø80
STK 50/75/100
ø100
*1: ‌The custom stroke length is available in 1 mm increments. (Less than 10 mm with switch is not available.)
SRL3 However, the total length is the same as that of the next longer standard stroke length.

SRG3 Custom stroke length

SRM3 ● SSD2-KG2/KG3 Series A + stroke length
Standard products B + stroke length
Item
SRT3 Standard stroke length body with spacer
Model No. Refer to How to order.
MRL2 A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
MRG2 Bore size Stroke range
16 1 to 29
SM‑25 Stroke range 20 to 25 1 to 49
32 to 100 1 to 99
ShkAbs
Model No.: SSD2-KG2-32-41
A +4 mm spacer is added to the SSD2-KG2-32-45 standard
FJ Example of model No.
cylinder to create 41 mm stroke length.
FK B + stroke length is 88 mm.

Spd
Contr

Ending

956
 SSD2-KG2/KG3 Series
Specifications
Switch specifications SCP*3
● Proximity switch
Type/model No. Proximity/2-wire Proximity/3-wire
CMK2
Item T2YLH/T2YLV T3YLH/T3YLV
Applications Dedicated for programmable controller Programmable controller, relay
CMA2
Power supply voltage - 10 to 28 VDC
Load voltage/current 10 to 30 VDC, 5 to 20 mA *1 30 VDC or less, 50 mA or less SCM
Indicator lamp Red/green LED (Lit when ON)
Leakage current 1 mA or less 10 μA or less SCG
Max. shock resistance 980 m/S2
Weight g 1 m:33 3 m:87 5 m:142 SCA2
*1 : The above max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60˚C) SCS2
*2 : Refer to Ending Page 1 for other switch specifications.
CKV2
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
CAV2/
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100 COVP/N2
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø16 69 114 79 124 90 135 101 146 112 157 123 168 - - - - - - - - - - - - SSD2
ø20 68 163 101 176 114 189 126 201 139 214 151 226 164 239 176 251 189 264 201 276 - - - -
ø25 118 209 134 225 150 241 166 257 181 272 198 289 214 305 230 321 246 337 262 353 - - - - SSG
ø32 211 325 232 346 253 367 275 389 297 411 319 433 341 455 362 476 384 498 405 519 513 627 620 734
SSD
ø40 289 432 316 459 343 486 369 512 395 538 422 565 449 592 475 618 502 645 528 671 661 804 793 936
ø50 - - 509 703 551 745 594 788 637 831 678 872 720 914 762 956 804 998 846 1040 1056 1250 1266 1460
CAT
ø63 - - 727 1006 782 1061 837 1116 893 1172 948 1227 1003 1282 1058 1337 1113 1392 1168 1447 1443 1722 1718 1997
ø80 - - 1274 1687 1361 1774 1447 1860 1534 1947 1621 2034 1708 2121 1794 2207 1881 2294 1967 2380 2400 2813 2832 3245 MDC2
ø100 - - 1887 2454 2001 2568 2115 2682 2229 2796 2342 2909 2456 3023 2570 3137 2684 3251 2798 3365 3368 3935 3938 4505
MVC
Theoretical thrust table (Unit: N)
SMG
Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MSD/
Push - 30.2 40.2 60.3 80.4 1.01 × 102 1.21 × 102 1.41 × 102 1.61 × 102 1.81 × 102 2.01 × 102 MSDG
ø16
Pull - 22.6 30.2 45.2 60.3 75.4 90.5 1.06 × 102 1.21 × 102 1.36 × 102 1.51 × 102
FC*
Push - 47.1 62.8 94.2 1.26 × 10 1.57 × 10 1.88 × 10 2.20 × 102 2.51 × 102 2.83 × 102 3.14 × 102
2 2 2
ø20
Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102 STK
Push - 73.6 98.2 1.47 × 102 1.96 × 102 2.45 × 102 2.95 × 102 3.44 × 102 3.93 × 102 4.42 × 102 4.91 × 102
ø25
Pull - 56.7 75.6 1.13 × 102 1.51 × 102 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102 SRL3
Push - 1.21 × 10 1.61 × 10 2.41 × 102 3.22 × 102 4.02 × 102 4.83 × 102 5.63 × 102 6.43 × 102 7.24 × 102 8.04 × 102
2 2
ø32
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102 SRG3
Push - 1.88 × 10 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103
2
ø40 SRM3
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
Push - 2.95 × 10 3.93 × 10 5.89 × 10 7.85 × 10 9.82 × 10 1.18 × 10 1.37 × 10 1.57 × 10 1.77 × 10 1.96 × 10
2 2 2 2 2 3 3 3 3 3
ø50 SRT3
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 10 4.68 × 10 6.23 × 10 9.35 × 10 1.25 × 10 1.56 × 10 1.87 × 10 2.18 × 10 2.49 × 10 2.81 × 10 3.12 × 10
2 2 2 2 3 3 3 3 3 3 3
ø63 MRL2
Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103
ø80 MRG2
Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103
Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103 SM‑25
ø100
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103
ShkAbs

FJ

FK
Spd
Contr

Ending

957
 SSD2-KG2/KG3 Series
SCP*3 How to order Code Description
Without switch (without magnet for switch) A Degree of protection level
CMK2 SSD2-KG2 16 30 N LB I KG2 High load + coolant proof scraper + packing NBR
KG3 High load + coolant proof scraper + packing FKM
With switch (built-in magnet for switch)
KG2L High load + coolant proof scraper + packing NBR, with switch
CMA2 SSD2-KG2L 16 30 T2YLH R N LB I KG3L High load + coolant proof scraper + packing FKM, with switch

SCM
B Bore size (mm)
16 ø16
A Degree of 20 ø20
SCG
protection level 25 ø25
32 ø32
SCA2 B Bore
40 ø40
size
50 ø50
SCS2 63 ø63
80 ø80
CKV2 100 ø100

CAV2/
C Stroke length (mm)
C Stroke length
COVP/N2 Refer to the stroke length table on the following page.
SSD2 D Switch model No.
D Switch model No. Lead wire Lead wire Lead

Voltage
Proximity Contact
SSG *5 Display
Straight L-shaped wire
T2YLH* T2YLV* 2-wire
DC 2-color display
SSD T3YLH* T2YLV* 3-wire
* Lead wire length
CAT Blank 1 m (standard)
3 3 m (option)
MDC2 5 5 m (option)
E Switch quantity
MVC E Switch quantity
R 1 on rod side
H 1 on head side
SMG D 2

MSD/ F Option
F Option
MSDG Blank Rod end female thread
N Rod end male thread
FC*
G Mounting bracket
G Mounting
Blank Without mounting bracket
STK bracket
LB Axial foot (made-to-order product)
*1
CB Clevis bracket (pin and snap ring included)
SRL3 *2
FA Rod side flange (made-to-order product)
FB Head side flange
SRG3 Precautions for model No. selection
H Accessory (available when rod end male thread “N” is selected)
*1 : The mounting bracket is included at shipment. H Accessory *3
*2 : The structure of bore sizes ø16 to ø25 does not permit
I Rod eye
SRM3 Y Rod clevis (pin and snap ring included)
retrofitting of the foot bracket (LB) or flange bracket (FA)
on the rod side. Assembly before shipment is available
SRT3 as made to order.
*3 : “I” and “Y” cannot be selected together.
*4 : Refer to pages 750 and 751 for combinations of
MRL2 variations/options.
*5 : Switches are shipped with the product. Contact CKD if
MRG2 assembling before shipment is necessary.

[Example of model No.]

SM‑25
SSD2-KG2L-32-30-T2YLH-R-N-LB
ShkAbs Model: Compact cylinder, high load
●
A Degree of protection level : Coolant proof scraper +

FJ packing NBR, with switch

●
B Bore size : ø32 mm
FK ●
C Stroke length : 30 mm
●
D Switch model No. : Proximity switch T2YLH,

Spd lead wire 1 m

Contr ●
E Switch quantity : 1 on rod side
●
F Option : Rod end male thread
●
Ending G Mounting bracket : Axial foot

958
 SSD2-KG2/KG3 Series
How to order
How to order switch SCP*3
SW T2YLH
CMK2

Switch model No. CMA2

(Item D on page 958)
SCM
[Stroke length table]
Applicable bore size SCG
Stroke length (mm)
16 20 25 32 40 50 63 80 100
SCA2
5 ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ●
SCS2
15 ● ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● ● CKV2
25 ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● CAV2/
COVP/N2
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ● SSD2
45 ● ● ● ● ● ● ● ●
50 ● ● ● ● ● ● ● ● SSG
75 ● ● ● ● ● ●
100 ● ● ● ● ● ● SSD
Min. stroke length (mm) *1 1
CAT
Max. stroke length (mm) 30 50 100
Custom stroke length *2
MDC2
*1 : Less than 10 mm stroke length is not available.
Refer to page 956 for the number of installed switches and the min. stroke length.
*2 : The total length is the same as that of the next longer standard stroke length. MVC

How to order mounting bracket SMG

Bore size (mm) MSD/
ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Mounting bracket MSDG
Foot (LB) SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
FC*
Flange (FA/FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-16 SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100 STK
*1: The foot mounting bracket is provided as 2 pcs./set.
*2: The structure of bore sizes ø16 to ø25 does not permit retrofitting of the foot bracket (LB) or flange bracket (FA) on the rod side. Contact CKD for details.
SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

959
 SSD2-KG2/KG3 Series
SCP*3
Internal structure and parts list
● Degree of protection: Packing NBR SSD2-KG2/KG2L
CMK2 ● Degree of protection: Packing FKM SSD2-KG3/KG3L

CMA2 ● SSD2-KG23 L-16 (with switch) ● SSD2-KG23 L-20, 25 (with switch) ● SSD2-KG23 L-32 to 50 (with switch)

SCM 3 6 8 11 12 13 14 15 16 18 19 3 4 6 9 8 11 12 13 14 15 16 18 19 4 3 6 9 8 12 11 13 14 15 17 16 18 19

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2
2 1 5 9 7
SSD2 2 5 1 7 10
2 1 5 10 7

SSG
● SSD2-KG23 L-63 to 100 (with switch) ● SSD2-KG23 -16 (without switch) ● SSD2-KG23 -20, 25 (without switch)
SSD
6 9 8 12 11 17 15 16 18 19 3 6 8 11 12 15 17 16 18 19 3 4 6 9 8 10 11 12 15 17 16 18 19
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*
2 1 5 9 7 2 1 5 7
2 5 7 10
STK

SRL3
● SSD2-KG23 -32 to 50 (without switch) ● SSD2-KG23 -63 to 100 (without switch)
SRG3
4 3 6 9 8 12 11 15 17 16 18 19 6 9 12 8 11 13 14 17 15 16 18 19

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs
2 1 5 10 7
2 5 7 10
FJ

FK
Spd
Contr

Ending

960
 SSD2-KG2/KG3 Series
Internal structure and parts list
Main parts list SCP*3
No. Part name Material Remarks No. Part name Material Remarks
1 Hexagon socket head cap screw Stainless steel ø16 to ø25 only 10 Bush Oiles drymet ø20 to ø100 only
CMK2
2 Piston rod Stainless steel Industrial chrome plating 11 Body Aluminum alloy Hard alumite
3 Adaptor (A) Aluminum alloy Alumite: ø16 to ø25 only 12 Cushion rubber R Urethane rubber
CMA2
4 Adaptor (B) Aluminum alloy Alumite: ø20/ø25 only 13 Spacer Aluminum alloy ø16 to ø32: Chromate
G2 Nitrile rubber 14 Magnet Plastic
5 Scraper SCM
G3 Fluoro rubber G2 Nitrile rubber
15 Piston packing
6 C type snap ring (for hole) Stainless steel G3 Fluoro rubber
SCG
G2 Nitrile rubber 16 Wear ring Polyacetal resin
7 Rod packing
G3 Fluoro rubber 17 Piston Aluminum alloy Chromate SCA2
G2 Nitrile rubber 18 Cushion rubber H Urethane rubber
8 Rod metal gasket
G3 Fluoro rubber ø16 to ø25: Stainless steel SCS2
19 Cover Alumite
9 Rod metal Aluminum alloy Alumite ø32 to ø100: Aluminum alloy

CKV2
Repair parts list CAV2/
Part name COVP/N2
Kit No. Repair parts No.
Bore size (mm)
SSD2-KG2-16K SSD2
ø16
SSD2-KG3-16K
SSD2-KG2-20K SSG
ø20
SSD2-KG3-20K
SSD2-KG2-25K SSD
ø25
SSD2-KG3-25K
SSD2-KG2-32K CAT
ø32
SSD2-KG3-32K
SSD2-KG2-40K 5 7 8 12 MDC2
ø40
SSD2-KG3-40K 15 16 18

SSD2-KG2-50K
MVC
ø50
SSD2-KG3-50K
SMG
SSD2-KG2-63K
ø63
SSD2-KG3-63K MSD/
SSD2-KG2-80K MSDG
ø80
SSD2-KG3-80K
FC*
SSD2-KG2-100K
ø100
SSD2-KG3-100K
STK
Note: S
 pecify the kit No. when placing an order.

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

961
 SSD2-KG2/KG3 Series
SCP*3
Dimensions
● Degree of protection: Packing NBR
CMK2 SSD2-KG/KG2L
● Degree of protection: Packing FKM
CMA2 SSD2-KG3/KG3L
● Rod end male thread
SCM A + stroke length
ø16 ø20/ø25
B + stroke length
a’ wf
WF 10 Q + stroke length
SCG 6-J F c’
Mounting hole F C D
N T
SCA2 N KK HD 2-EE

SCS2

øMM
FB
F
N

øMM
FB
N
F

CKV2
FA

Width across
CAV2/ øK 6-J
kk’ flats M
M
COVP/N2 øK

øI
M Mounting hole RD 8-KA Width across flats H
FB
FA FA
SSD2
ø32 ø40 to ø100
SSG A + stroke length F A + stroke length
WF B + stroke length N 8-J WF B + stroke length
SSD F 10 Q + stroke length 2-EE
H Mounting hole 5 C D
N D 2-EE HD
C
O

CAT H HD KK
O

KK
MDC2

øMM
G

FB

øU
øMM

N
F
G

FB
N
F

MVC

6-J
SMG
øK M Mounting hole M
øI

øI
8-KA
øK

RD 8-KA RD
FA
MSD/ FA
MSDG
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
FC* length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
STK *3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*4 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
*5 : Dimensions in ( ) of code J are for the spot face of rod side mounting hole.
SRL3 Code Dimensions without switch Common dimensions with switch
Bore size (mm) A *1 B *1 Q *1 A *1 B *1 Q *1 C D EE F FA FB G H I J K KA KK
SRG3 ø16 40.5 32 22 45.5 37 27 15.5 5.5 M5 29 21 8 - - 3.5 6.5 spot face depth 3.5 (13.4) 38 M4 depth 7 M4 depth 8
ø20 44 34.5 24.5 54 44.5 34.5 18 5.5 M5 36 24.5 16 - - 5.5 9 spot face depth 5.5 (15.5) 47 M6 depth 11 M5 depth 7
SRM3 ø25 47.5 37.5 27.5 57.5 47.5 37.5 21 6 M5 40 26.5 17 - - 5.5 9 spot face depth 5.5 (15.5) 51 M6 depth 11 M6 depth 12
ø32 55(65) 43(53) 33(43) 65 53 43 18 8 Rc1/8 45 29 24 49.5 12.5 5.5 9 spot face depth 5.5 (15.5) 60 M6 depth 11 M8 depth 13
SRT3 ø40 56.5(66.5) 39.5(49.5) - 66.5 49.5 - 12 8.5 Rc1/8 52 32.5 31 57 15 5.5 ø9 spot face depth 5.5 69 M6 depth 11 M8 depth 13
ø50 58.5(68.5) 40.5(50.5) - 68.5 50.5 - 10.5 10.5 Rc1/4 64 38.5 32 71 18 6.9 ø11 spot face depth 6.5 86 M8 depth 13 M10 depth 15
MRL2 ø63 64(74) 46(56) - 74 56 - 13 11 Rc1/4 77 45 32 84 23 8.7 ø14 spot face depth 9 103 M10 depth 25 M10 depth 15
ø80 73.5(83.5) 53.5(63.5) - 83.5 63.5 - 16 13 Rc3/8 98 55.5 32 104 31 10.5 ø17.5 spot face depth 11 132 M12 depth 28 M16 depth 21
MRG2
ø100 85(95) 63(73) - 95 73 - 23 15 Rc3/8 117 65 32 123.5 38 10.5 ø17.5 spot face depth 11 156 M12 depth 28 M20 depth 27
Code Common dimensions with switch Proximity T2YLH, Dimensions of rod end male thread part
SM‑25
Bore size T2YLV, T3YLH, T3YLV
M MM N O U WF a’ c’ H KK’ M MM T wf
(mm) HD RD
ShkAbs
ø16 6 8 20 - - 8.5 2.5 14.5 12 10 10 M6 6 8 3.6 8.5
ø20 8 10 25.5 - - 9.5 4.5 20.0 14 12 13 M8 8 10 5 9.5
FJ
ø25 10 12 28 - - 10 4.5 22.5 17.5 15 17 M10×1.25 10 12 6 10
ø32 14 16 34 4.5 - 12 9.5 25.5 23.5 20.5 22 M14×1.5 14 16 8 10
FK
ø40 14 16 40 5 28 17 10.5 31.0 23.5 20.5 22 M14×1.5 14 16 8 15
Spd ø50 17 20 50 7 35 18 11.5 31.0 28.5 26 27 M18×1.5 17 20 11 15
Contr ø63 17 20 60 7 35 18 18.0 29.0 28.5 26 27 M18×1.5 17 20 11 15
ø80 22 25 77 6 43 20 24.0 31.5 35.5 32.5 32 M22×1.5 22 25 13 18
Ending ø100 27 30 94 6.5 59 22 29.5 35.5 35.5 32.5 41 M26×1.5 27 30 16 18

962
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

963
 SSD2-KG2/KG3 Series
SCP*3
Dimensions with mounting bracket
● Clevis bracket (CB)
CMK2 SSD2-KG2(L)/KG3(L)-20 to 100 -CB

CMA2 · ø16 to ø25 · ø32 to ø100

A + stroke length UB A + stroke length UB
SCM WF B + stroke length D WF B + stroke length D CB
CB CC
CC H
SCG R
RM
SCA2
øCA

E
N
N
E

CD
CD

H1
SCS2

0
AC
H1

N
CJ + stroke length N
0

CJ + stroke length Mounting bolt 4-C

Mounting bolt 4-C E E
CKV2
CAV2/
COVP/N2
Rod end male thread Rod end male thread
SSD2 A + stroke length A + stroke length
a’ wf B + stroke length a’ wf B + stroke length

SSG

SSD

CAT CJ + stroke length

CJ + stroke length

MDC2

MVC

SMG
MSD/
MSDG

FC* Code Common dimensions

Bore size
AC CA CB CC CD D E G H MR N UB
STK (mm)
ø16 - 15 6.6 +00.3 8 5 5 29 M4×12 C2 - 20 12
SRL3 ø20 - 20 8.2 +00.2 12 8 5 36 M6×16 C4 - 25.5 16
ø25 - 24 10.2 +00.2 14 10 5 40 M6×16 C5 - 28 20
SRG3 ø32 4.5 - 18.2 +00.2 14 10 5 45 M6×16 - 10 34 36
ø40 5 - 18.2 +00.2 14 10 6 52 M6×16 - 10 40 36
SRM3 ø50 6 - 22.2 +00.2 20 14 7 64 M8×20 - 14 50 44
ø63 7 - 22.2 +00.2 20 14 8 77 M10×25 - 14 60 44
SRT3 ø80 9 - 28.2 +00.2 27 18 10 98 M12×40 - 18 77 56
ø100 12 - 32.2 +00.2 31 22 13 117 M12×40 - 22 94 64
MRL2 Code Female thread Male thread
Bore size Without switch With switch Without switch With switch
MRG2 WF a’ wf
(mm) A B CJ A B CJ A B CJ A B CJ
ø16 8.5 61.5 32 55.5 66.5 37 60.5 12 8.5 73.5 32 55.5 78.5 37 60.5
SM‑25 ø20 9.5 71 34.5 62 81 44.5 72 14 9.5 85 34.5 62 95 44.5 72
ø25 10 77.5 37.5 67.5 87.5 47.5 77.5 17.5 10 95 37.5 67.5 105 47.5 77.5
ShkAbs ø32 12 85 43 75 95 53 85 23.5 10 106.5 43 73 116.5 53 83
ø40 17 88.5 39.5 78.5 98.5 49.5 88.5 23.5 15 110 39.5 76.5 120 49.5 86.5
FJ ø50 18 100.5 40.5 86.5 110.5 50.5 96.5 28.5 15 126 40.5 83.5 136 50.5 93.5
ø63 18 108 46 94 118 56 104 28.5 15 133.5 46 91 143.5 56 101
FK ø80 20 129.5 53.5 111.5 139.5 63.5 121.5 35.5 18 163 53.5 109.5 173 63.5 119.5
ø100 22 152 63 130 162 73 140 35.5 18 183.5 63 126 193.5 73 136
Spd
Contr

Ending

964
 SSD2-KG2/KG3 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Head side flange (FB)
SSD2-KG2(L)/KG3(L)-20 to 100 -FB CMK2

· ø16 to ø25 · ø32 to ø100 CMA2

FM FM
A + stroke length A + stroke length FL SCM
FL
WF B + stroke length FT N 4-FD
WF B + stroke length FT N
SCG
2-FD

SCA2

FC
FH
FH
N

SCS2
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt CKV2
ø80/ø100: Special bolt
CAV2/
COVP/N2
Rod end male thread
Rod end male thread
A + stroke length A + stroke length
SSD2
a’ wf B + stroke length FT a’ wf B + stroke length FT
SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

Code Common dimensions Female thread Male thread FC*

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT G N WF a' wf
(mm) A B A B A B A B STK
ø16 - 4.5 30 45 55 5.5 M4×12 20 8.5 46 32 51 37 12 8.5 58 32 63 37
ø20 - 6.6 39 48 60 8 M6×16 25.5 9.5 52 34.5 62 44.5 14 9.5 66 34.5 76 44.5 SRL3
ø25 - 6.6 42 52 64 8 M6×16 28 10 55.5 37.5 65.5 47.5 17.5 10 73 37.5 83 47.5
ø32 34 5.5 48 56 65 8 M6×16 34 12 63 43 73 53 23.5 10 84.5 43 94.5 53 SRG3
ø40 40 5.5 54 62 72 8 M6×16 40 17 64.5 39.5 74.5 49.5 23.5 15 86 39.5 96 49.5
ø50 50 6.6 67 76 89 9 M8×20 50 18 67.5 40.5 77.5 50.5 28.5 15 93 40.5 103 50.5 SRM3
ø63 60 9 80 92 108 9 M10×25 60 18 73 46 83 56 28.5 15 98.5 46 108.5 56
ø80 77 11 99 116 134 11 M12×40 77 20 84.5 53.5 94.5 63.5 35.5 18 118 53.5 128 63.5 SRT3
ø100 94 11 117 136 154 11 M12×40 94 22 96 63 106 73 35.5 18 127.5 63 137.5 73
MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

965
 Compact cylinder Compact cylinder
double acting/single rod/coil scraper double acting/single rod/anti-spatter adherence

SCP*3
SSD2-G1 Series SSD2-G4 Series
● Bore size: ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-G1/G4
Item
SSD2-G1L/G4L (with switch)
SCA2 Bore size mm ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+1.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion None
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MDC2
Stroke length
Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
MVC
5/10/15/20/25/
ø25 50
SMG 30/35/40/45/50
ø32 5/10/15/20/25/30/ 1(10)
MSD/ ø40 35/40/45/50/75/100 The value in ( ) is for
MSDG
ø50 types with one or two
10/15/20/25 100
FC* ø63 switches.
30/35/40/45/50
ø80
75/100
STK ø100

SRL3
Custom stroke length
SRG3
● SSD2-G1, G4 Series A + stroke length

SRM3 Standard products B + stroke length

Item
Standard stroke length body with spacer
SRT3 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
MRL2 Description
stroke length in 1 mm increments.
Bore size Stroke range
MRG2
Stroke range 25 1 to 49
32 to 100 1 to 99
SM‑25
Model No.: SSD2-G1-32-38
Example of model No. A +2 mm spacer is added to the SSD2-G1-32-40 standard
ShkAbs
cylinder to create 38 mm stroke length. B + stroke length is 63mm.
FJ

FK
Spd
Contr

Ending

966
 SSD2-G1/G4 Series
Specifications
Switch specifications SCP*3
Proximity 2-wire
Item
T2YD/T2YDT CMK2
Applications Dedicated for programmable controller
Indicator lamp Red/green LED (Lit when ON) CMA2
Load voltage 24 VDC ±10%
Load current 5 to 20 VDC
SCM
Internal voltage drop 6V or less
Leakage current 1.0 mA or less
Output delay time *1 SCG
60 ms or less
(Delay ON, delay OFF)
1 m (oil resistant vinyl cabtyre cable SCA2
Lead wire length 2
ø 6, 0.5 mm x 2-conductor) *2, *3
Insulation resistance 100 MΩ and over with 500 VDC megger SCS2
Withstand voltage No failure after 1 minute of 1,000 VAC application.
Max. shock resistance 980 m/s2 CKV2
Ambient temperature -10 to +60°C
CAV2/
Degree of protection JIS C0920 (water-tight), IEC standards IP67, oil resistance
COVP/N2
Weight g 1 m:61 3 m:166 5 m:272
*1: ‌Indicates the time from magnetic sensor detection of the piston magnet until switch output. SSD2
*2: 3 m and 5 m lead wires are available as options.
*3: Flame-resistant lead wires are available as options.
*4: This switch cannot be used in DC environments. SSG

SSD

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) CAT
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch MDC2
ø25 131 222 146 237 162 253 178 269 194 285 209 300 225 600 241 332 257 166 272 363 - - - -
MVC
ø32 184 298 206 320 228 342 250 364 271 385 293 407 315 429 337 451 359 473 380 494 553 602 661 709
ø40 265 408 292 435 318 461 345 488 372 515 398 541 425 568 451 594 478 621 504 647 722 780 854 912
SMG
ø50 - - 460 654 502 696 544 738 586 780 629 823 671 865 713 907 755 949 797 991 1144 1201 1354 1411
ø63 - - 658 937 713 992 768 1047 823 1102 878 1157 934 1213 989 1268 1044 1323 1099 1378 1589 1653 1864 1928 MSD/
MSDG
ø80 - - 1180 1593 1267 1680 1353 1765 1440 1853 1526 1939 1613 2026 1700 2113 1787 2200 1873 2286 2650 2719 3082 3151
ø100 - - 1768 2335 1882 2449 1995 2562 2109 2676 2223 2790 2337 2904 2450 3017 2564 3131 2678 3245 3743 3815 4313 4385 FC*

STK

Theoretical thrust table (Unit: N) SRL3

Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SRG3
Push - 73.6 98.2 1.47 × 10 1.96 × 10 2.45 × 10 2.95 × 10 3.44 × 10 3.93 × 10 4.42 × 10 4.91 × 10
2 2 2 2 2 2 2 2
ø25 SRM3
Pull - 56.7 75.6 1.13 × 102 1.51 × 102 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
Push - 1.21 × 10 1.61 × 10 2.41 × 10 3.22 × 10 4.02 × 10 4.83 × 10 5.63 × 10 6.43 × 10 7.24 × 10 8.04 × 10
2 2 2 2 2 2 2 2 2 2
ø32 SRT3
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103 MRL2
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103 MRG2
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 102 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103 SM‑25
ø63
Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103 ShkAbs
ø80
Pull 4.54 × 10 6.80 × 10 9.07 × 10 1.36 × 10 1.81 × 10 2.27 × 10 2.72 × 10 3.17 × 10 3.63 × 10 4.08 × 10 4.54 × 10
2 2 2 3 3 3 3 3 3 3 3

Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103 FJ
ø100
Pull 7.15 × 10 1.07 × 10 1.43 × 10 2.14 × 10 2.86 × 10 3.57 × 10 4.29 × 10 5.00 × 10 5.72 × 10 6.43 × 10 7.15 × 10
2 3 3 3 3 3 3 3 3 3 3

FK
Spd
Contr

Ending

967
 SSD2-G1/G4 Series
SCP*3 How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-G4 32 10 N LB I SSD2-G1 Double acting/single rod/coil scraper
SSD2-G1L Double acting/single rod/coil scraper/with switch
With switch (built-in magnet for switch)
SSD2-G4 Double acting/single rod/anti-spatter adherence
CMA2 SSD2-G4L 32 10 T2YD R N LB I SSD2-G4L Double acting/single rod/anti-spatter adherence/with switch

SCM
B Bore size (mm)
25 ø25
A Model No. 32 ø32
SCG
40 ø40
50 ø50
SCA2 B Bore
63 ø63
size
80 ø80
SCS2 100 ø100
C Stroke length (mm)
CKV2 C Stroke length
*1 Refer to the stroke length table on the following page.
CAV2/
COVP/N2 D Switch model No.
D Switch model No.
Lead wire Lead wire Lead

Voltage
Proximity Contact
SSD2 Display
Straight L-shaped wire
T2YD* - 2-color display
SSG DC 2-wire
T2YDT* - for AC magnetic field
* Lead wire length
SSD Blank 1 m (standard)
3 3 m (option)
CAT 5 5 m (option)
E Switch quantity
MDC2 E Switch quantity
R 1 on rod side
H 1 on head side
MVC D 2
F Option
SMG F Option
Blank Rod end female thread
MSD/ N Rod end male thread
MSDG G Mounting bracket
G Mounting
Blank Without mounting bracket
FC* bracket
LB Axial foot (made to order)
*1
CB Clevis bracket (pin and snap ring included)
STK FA Rod side flange (made to order)
FB Head side flange
SRL3
H Accessory (available when rod end male thread “N” is selected)
H Accessory
I Rod eye
SRG3 *2
Y Rod clevis (pin and snap ring included)

SRM3

SRT3

MRL2

MRG2 Precautions for model No. selection

*1: The mounting bracket is included at shipment.
SM‑25 *2: “I” and “Y” cannot be selected together.

ShkAbs [Example of model No.]

SSD2-G4L-32-10-T2YD-R-N
FJ Model: Compact cylinder
Double acting/anti-spatter adherence
FK ● B Bore size : ø32 mm
● C Stroke length : 10 mm
Spd
● D Switch model No. : Proximity switch for AC magnetic field
Contr T2YD, lead wire length 1 m
● E Switch quantity : 1 on rod side
Ending ● F Option : Rod end male thread

968
 SSD2-G1/G4 Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
25 32 40 50 63 80 100 CMK2
5 ● ● ●
10 ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 10 mm stroke length is not available.
Refer to page 966 for the min. stroke length with switch. SSG
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length.
SSD

CAT

How to order switch MDC2

SW T2YD* MVC

SMG
Switch model No.
MSD/
(Item D on page 968) MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø25 ø32 ø40 ø50 ø63 ø80
Mounting bracket
Flange (FB) SSD2-FA-25 SSD2-G1-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SRG3
Clevis bracket (CB) SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80
Bore size (mm) SRM3
ø100
Mounting bracket
Flange (FB) SSD2-FA-100 SRT3
Clevis bracket (CB) SSD2-CB-100
MRL2
*1: The foot mounting bracket is provided as 2 pcs./set.

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

969
 SSD2-G1/G4 Series
SCP*3
Internal structure and parts list
● SSD2-G1L, G4L-25 to 50 ‌(double acting/anti-spatter adherence/ ● SSD2-G1L, G4L-63 to 100 ‌(double acting/anti-spatter adherence/
CMK2 with switch) with switch)

CMA2
1 2 4 3 6 7 5 8 13 14 9 10 11 1 2 4 7 3 6 5 12 8 13 14 9 10 11
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG
● SSD2-G1, G4-25 to 50 (double acting/anti-spatter adherence) ●S
 SD2-G1, G4-63 to 100 (double acting/anti-spatter adherence)
SSD

CAT 1 2 4 3 6 5 7 8 9 10 11 13 1 2 4 7 3 5 6 12 8 9 10 11 13

MDC2

MVC

SMG
MSD/
MSDG

FC*
Over 50 st
Over 50 st
STK

SRL3

SRG3
No. Part name Material Remarks No. Part name Material Remarks
SRM3 ø25: Stainless steel Industrial chrome 8 Body Aluminum alloy Hard alumite
1 Piston rod
ø32 to ø100: Steel plating 9 Piston packing Nitrile rubber

SRT3 2 Coil scraper Phosphor bronze 10 Piston Aluminum alloy Chromate

3 C type snap ring Steel Zinc phosphate ø25: Stainless steel
11 Cover ø32 to ø100: Alumite
ø32 to ø100: Aluminum alloy
MRL2 4 Lube keeping structure Special rubber G4 only
5 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet
MRG2 6 Rod metal
ø25 to ø50: Special aluminum ø25 to ø50: Alumite 13 Spacer Aluminum alloy Chromate
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 14 Magnet Plastic
SM‑25 7 Rod packing Nitrile rubber

Repair parts list

ShkAbs Part name
Kit No. Repair parts No.
Bore size (mm)
FJ ø25 SSD2-G1-25K
ø32 SSD2-G1-32K
FK ø40 SSD2-G1-40K
Spd ø50 SSD2-G1-50K 2 5 7 9

Contr ø63 SSD2-G1-63K

ø80 SSD2-G1-80K
Ending ø100 SSD2-G1-100K

970
 SSD2-G1/G4 Series
Dimensions
Dimensions SCP*3
● SSD2-G1L/G4L-25 to 100 (with switch/T0H/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
F A + stroke length CMK2
N WF B + stroke length a’ wf
8-J
Mounting hole H KK UA C 2-EE D c’ CMA2
T
SCM
O

HD

SCG

øMM
øMM
G

øUB
FB
N
F

SCA2
kk’ Width across flats M
FA
SCS2
øK RD 8-KA

øI
Width across flats H
M
CKV2
● SSD2-G1/G4-25 to 100 (without switch)
F A + stroke length CAV2/
N WF B + stroke length COVP/N2
8-J
Mounting hole H UA C 2-EE D
SSD2
KK
0

SSG

SSD
øMM
øUB
G

N
F

CAT

øK M MDC2
øI

8-KA

Code Without switch Common dimensions with switch

MVC
Bore size A *1 *6
A *1 *1 *6
B B C D *6 EE F FA FB G H I
(mm) G1 G4 G1 G4
ø25 37.5 37.5 32.5 47.5 47.5 42.5 11 6 M5 40 31.5 17 - - 5.5
SMG
*5
ø32 35(45) 40(50) 23(33) 45 50 33 8(10) 8(5.5) Rc1/8 45 33.5 24 49.5 12.5 5.5 MSD/
ø40 41.5(51.5) 46.5(56.5) 29.5(39.5) 51.5 56.5 39.5 12(11.5) 8.5(8) Rc1/8 52 37 31 57 15 5.5 MSDG
ø50 43.5(53.5) 48.5(58.5) 30.5(40.5) 53.5 58.5 40.5 10.5 10.5 Rc1/4 64 43 32 71 18 6.9
ø63 49(59) 54(64) 36(46) 59 64 46 13 11 Rc1/4 77 49.5 32 84 23 8.7 FC*
ø80 58.5(68.5) 63.5(73.5) 43.5(53.5) 68.5 73.5 53.5 16 13 Rc3/8 98 60 32 104 31 10.5
ø100 70(80) 75(85) 53(63) 80 85 63 23 15 Rc3/8 117 69.5 32 123.5 38 10.5 STK
Code Common dimensions with switch Proximity T2YD
Bore size UA WF SRL3
J K KA KK M MM N O UB HD RD *2
(mm) G1 G4 G1 G4
ø25 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 - - - - 5 5 3 8.5 SRG3
ø32 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 5 10 23 h9 12 17 3.5 8.5
ø40 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 5 10 28 h9 12 17 5.5 10.5 SRM3
ø50 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 5 10 35 h9 13 18 6 11
ø63 14 spot face depth 9 103 M10 depth 25 M10 depth 15 17 20 60 7 5 10 35 h9 13 18 11 11.5 SRT3
ø80 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21 22 25 77 6 5 10 43 h9 15 20 16 14
ø100 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 5 10 59 h9 17 22 21.5 18
MRL2
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke length) to
the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting. MRG2
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*4 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
*5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5. SM‑25
*6 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke without switch.
● Rod end male thread ShkAbs
Code wf
a’ c’ H kk’ M MM T
Bore size (mm) G1 G4 FJ
ø25 17.5 15 17 M10×1.25 10 12 6 5 5
ø32 23.5 20.5 22 M14×1.5 14 16 8 10 15 FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 10 15
ø50 28.5 26 27 M18×1.5 17 20 11 10 15 Spd
ø63 28.5 26 27 M18×1.5 17 20 11 10 15
Contr
ø80 35.5 32.5 32 M22×1.5 22 25 13 13 18
ø100 35.5 32.5 41 M26×1.5 27 30 16 13 18
Ending

971
 SSD2-G1/G4 Series
SCP*3
Dimensions with mounting bracket
● Clevis bracket (CB)
CMK2 SSD2-G1(L)/G4(L)-25 to 100 -CB

CMA2 · ø25 · ø32 to ø100

A + stroke length UB A + stroke length UB
SCM WF B + stroke length D WF B + stroke length D CB
CB CC
CC H
SCG
R
MR

SCA2
øCA

E
N
N
E

CD
CD

H1
SCS2

0
AC
H

N
10

CJ + stroke length CJ + stroke length Mounting bolt 4-G N

Mounting bolt 4-C E E
CKV2
CAV2/
COVP/N2
Rod end male thread Rod end male thread
SSD2 A + stroke length A + stroke length
a’ wf B + stroke length a’ wf B + stroke length

SSG

SSD

CAT CJ + stroke length

CJ + stroke length

MDC2

MVC

SMG
MSD/
MSDG
Code Common dimensions Female thread
FC* Without switch With switch
Bore size WF
AC CA CB CC CD D E G H MR N UB A CJ A CJ
(mm) B B
STK G1 G4 G1 G4 G1 G4 G1 G4 G1 G4
ø25 - 24 10.2 14 10 5 40 M6×16 C2 - 28 20 5 5 67.5 67.5 32.5 57.5 57.5 77.5 77.5 42.5 67.5 67.5
ø32 4.5 - 18.2 14 10 5 45 M6×16 C4 10 34 36 12 17 65 70 23 55 60 75 80 33 65 70
SRL3
ø40 5 - 18.2 14 10 6 52 M6×16 C5 10 40 36 12 17 73.5 78.5 29.5 63.5 68.5 83.5 88.5 39.5 73.5 78.5
ø50 6 - 22.2 20 14 7 64 M8×20 - 14 50 44 13 18 85.5 90.5 30.5 71.5 76.5 95.5 100.5 40.5 81.5 86.5
SRG3 ø63 7 - 22.2 20 14 8 77 M10×25 - 14 60 44 13 18 93 98 36 79 84 103 108 46 89 94
ø80 9 - 28.2 27 18 10 98 M12×40 - 18 77 56 15 20 114.5 119.5 43.5 96.5 101.5 124.5 129.5 53.5 106.5 111.5
SRM3 ø100 12 - 32.2 31 22 13 117 M12×40 - 22 94 64 17 22 137 142 53 115 120 147 152 63 125 130
Code Male thread
SRT3 Without switch With switch
Bore size wf
a’ A CJ A CJ
(mm) B B
MRL2 G1 G4 G1 G4 G1 G4 G1 G4 G1 G4
ø25 17.5 5 5 85 85 32.5 57.5 57.5 95 95 42.5 67.5 67.5

MRG2 ø32 23.5 10 15 86.5 91.5 23 53 58 96.5 101.5 33 63 68

ø40 23.5 15 20 95 100 29.5 61.5 66.5 105 110 39.5 71.5 76.5
ø50 28.5 15 20 111 116 30.5 68.5 73.5 121 126 40.5 78.5 83.5
SM‑25
ø63 28.5 15 20 118.5 123.5 36 76 81 128.5 133.5 46 86 91
ø80 35.5 18 23 148 153 43.5 94.5 99.5 158 163 53.5 104.5 109.5
ShkAbs ø100 35.5 18 23 168.5 173.5 53 111 116 178.5 183.5 63 121 126

FJ

FK
Spd
Contr

Ending

972
 SSD2-G1/G4 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Head side flange (FB)
SSD2-G1(L)/G4(L)-25 to 100 -FB CMK2

· ø25 · ø32 to ø100 CMA2

FM FM
A + stroke length A + stroke length FL SCM
FL
WF B + stroke length FT N 4-FD
WF B + stroke length FT N
SCG
2-FD

SCA2

FC
FH
FH
N

SCS2
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt CKV2
ø80/ø100: Special bolt
CAV2/
COVP/N2
Rod end male thread
Rod end male thread
A + stroke length A + stroke length
SSD2
a’ wf B + stroke length FT a’ wf B + stroke length FT
SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG
Code Common dimensions Female thread
FC*
Without switch With switch
Bore size WF
FC FD FH FL FM FT N G A A
(mm) B B STK
G1 G4 G1 G4 G1 G4
ø25 - 6.6 42 52 64 8 28 M6×16 5 5 45.5 45.5 32.5 55.5 55.5 42.5
ø32 34 5.5 48 56 65 8 34 M6×16 12 17 43 48 23 53 58 33 SRL3
ø40 40 5.5 54 62 72 8 40 M6×16 12 17 49.5 54.5 29.5 59.5 64.5 39.5
ø50 50 6.6 67 76 89 9 50 M8×20 13 18 52.5 57.5 30.5 62.5 67.5 40.5 SRG3
ø63 60 9 80 92 108 9 60 M10×25 13 18 58 63 36 68 73 46
ø80 77 11 99 116 134 11 77 M12×40 15 20 69.5 74.5 43.5 79.5 84.5 53.5 SRM3
ø100 94 11 117 136 154 11 94 M12×40 17 22 81 86 53 91 96 63
Code Male thread
SRT3
Without switch With switch
Bore size wf
a’ A A
(mm) B B MRL2
G1 G4 G1 G4 G1 G4
ø25 17.5 5 5 63 63 32.5 73 73 42.5
ø32 23.5 10 15 64.5 69.5 23 74.5 79.5 33 MRG2
ø40 23.5 15 20 71 76 29.5 81 86 39.5
ø50 28.5 15 20 78 83 30.5 88 93 40.5 SM‑25
ø63 28.5 15 20 83.5 88.5 36 93.5 98.5 46
ø80 35.5 18 23 103 108 43.5 113 118 53.5 ShkAbs
ø100 35.5 18 23 112.5 117.5 53 122.5 127.5 63

FJ

FK
Spd
Contr

Ending

973
 Compact cylinder Compact cylinder
double acting/single rod/high load/coil scraper double acting/single rod/high load/anti-spatter adherence

SCP*3
SSD2-KG1 Series SSD2-KG4 Series
● Bore size: ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-KG1/KG4
Item
SSD2-KG1L/KG4L (with switch)
SCA2 Bore size mm ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion Rubber cushion
SSD Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.16 0.40 0.63 0.98 1.56 2.51 3.92
CAT

MDC2 Stroke length

Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
MVC 5/10/15/20/25/
ø25 50
30/35/40/45/50
SMG ø32 5/10/15/20/25/30/ 1(10)
ø40 35/40/45/50/75/100 The value in ( ) is for
MSD/
MSDG ø50 types with one or two
10/15/20/25 100
ø63 switches.
FC* 30/35/40/45/50
ø80
75/100
ø100
STK
*1: The custom stroke is available in 1 mm increments.
*2: ‌Dimensions of custom stroke length (example: 64 mm stroke length) are the same as the next stroke length up
SRL3 (example: 75 mm stroke length).

Custom stroke length

SRG3
● SSD2-KG1, KG4 Series A + stroke length

SRM3 Standard products B + stroke length

Item
Standard stroke length body with spacer
SRT3 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
MRL2 Description
stroke length in 1 mm increments.
Bore size Stroke range
MRG2
Stroke range 25 1 to 49
32 to 100 1 to 99
SM‑25
Model No.: SSD2-KG1-32-38

ShkAbs Example of model No. A +2 mm spacer is added to the SSD2-KG1-32-40 standard

cylinder to create 38 mm stroke length. B + stroke length is 83mm.
FJ

FK
Spd
Contr

Ending

974
 SSD2-KG1/KG4 Series
Specifications
Switch specifications SCP*3
Proximity 2-wire
Item
T2YD/T2YDT CMK2
Applications Dedicated for programmable controller
Indicator lamp Red/green LED (Lit when ON) CMA2
Load voltage 24 VDC ±10%
Load current 5 to 20 mA SCM
Internal voltage drop 6 V or less
Leakage current 1.0 mA or less SCG
Output delay time *1
30 to 60 ms SCA2
(Delay ON, delay OFF)
1 m (oil resistant vinyl cabtyre cable
Lead wire length SCS2
ø 6, 0.5 mm2 x 2-conductor) *2, *3
Insulation resistance 100 MΩ and over at 500 VDC megger
CKV2
Withstand voltage No failure after 1 minute of 1,000 VAC application.
Max. shock resistance 980 m/s2 CAV2/
COVP/N2
Ambient temperature -10 to +60°C
Degree of protection JIS C0920 (water-tight), IEC standards IP67, oil resistance SSD2
Weight g 1 m:61 3 m:166 5 m:272
*1: Indicates the time from magnetic sensor detection of the piston magnet until switch output. SSG
*2: 3 m and 5 m lead wires are available as options.
*3: Flame-resistant lead wires are available as options.
*4: This switch cannot be used in DC environments.
SSD

CAT

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) MDC2
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch MVC
ø25 146 237 162 253 178 269 194 285 209 300 226 317 242 333 258 349 274 365 290 381 - - - -
ø32 228 342 249 363 270 384 292 406 314 428 336 450 358 472 379 493 401 515 422 536 530 644 637 751 SMG
ø40 318 461 345 488 372 515 398 541 424 567 451 594 478 621 504 647 531 674 557 700 690 833 822 965
MSD/
ø50 - - 549 743 591 785 634 828 677 871 718 912 760 954 802 996 844 1038 886 1080 1096 1290 1306 1500 MSDG
ø63 - - 782 1061 837 1116 892 1171 948 1227 1003 1282 1058 1337 1113 1392 1168 1447 1223 1502 1498 1777 1773 2052
ø80 - - 1382 1795 1469 1882 1555 1968 1642 2055 1729 2142 1816 2229 1902 2315 1989 2402 2075 2488 2508 2921 2940 3353
FC*
ø100 - - 2029 2596 2143 2710 2257 2824 2371 2938 2484 3051 2598 3165 2712 3279 2826 3393 2940 3507 3510 4077 4080 4647
STK

SRL3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SRG3
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 73.6 98.2 1.47 × 102 1.96 × 102 2.45 × 102 2.95 × 102 3.44 × 102 3.93 × 102 4.42 × 102 4.91 × 102
SRM3
ø25
Pull - 56.7 75.6 1.13 × 10 1.51 × 10 1.89 × 10 2.27 × 10 2.64 × 10 3.02 × 10 3.40 × 10 3.78 × 10
2 2 2 2 2 2 2 2
SRT3
Push - 1.21 × 102 1.61 × 102 2.41 × 102 3.22 × 102 4.02 × 102 4.83 × 102 5.63 × 102 6.43 × 102 7.24 × 102 8.04 × 102
ø32
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102
MRL2
Push - 1.88 × 10 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103
2
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103 MRG2
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103 SM‑25
Push 3.12 × 10 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103
2
ø63
Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103 ShkAbs
Push 5.03 × 10 7.54 × 10 1.01 × 10 1.51 × 10 2.01 × 10 2.51 × 10 3.02 × 10 3.52 × 10 4.02 × 10 4.52 × 10 5.03 × 10
2 2 3 3 3 3 3 3 3 3 3
ø80 FJ
Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103
Push 7.85 × 10 1.18 × 10 1.57 × 10 2.36 × 10 3.14 × 10 3.93 × 10 4.71 × 10 5.50 × 10 6.28 × 10 7.07 × 10 7.85 × 10
2 3 3 3 3 3 3 3 3 3 3
ø100 FK
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103
Spd
Contr

Ending

975
 SSD2-KG1/KG4 Series
SCP*3 How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-KG4 32 10 N LB I SSD2-KG1 Double acting/single rod/high load/coil scraper
SSD2-KG1L Double acting/single rod/high load/coil scraper/with switch
With switch (built-in magnet for switch)
SSD2-KG4 Double acting/single rod/high load/anti-spatter adherence
CMA2 SSD2-KG4L 32 10 T2YD R N LB I SSD2-KG4L Double acting/single rod/high load/anti-spatter adherence/with switch

SCM
B Bore size (mm)
25 ø25
A Model No. 32 ø32
SCG
40 ø40
50 ø50
SCA2 B Bore
63 ø63
size
80 ø80
SCS2 100 ø100
C Stroke length (mm)
CKV2 C Stroke length
Refer to the stroke length table on the following page.
CAV2/
COVP/N2 D Switch model No.
D Switch model No.
Lead wire Lead wire Lead

Voltage
Proximity Contact
SSD2 Display
Straight L-shaped wire
T2YD* - 2-color display
SSG DC 2-wire
T2YDT* - for AC magnetic field
* Lead wire length
SSD Blank 1 m (standard)
3 3 m (option)
CAT 5 5 m (option)
E Switch quantity
MDC2 E Switch quantity R 1 on rod side
H 1 on head side
MVC D 2
F Option
SMG F Option Blank Rod end female thread
MSD/ N Rod end male thread
MSDG G Mounting bracket
G Mounting Blank Without mounting bracket
FC* bracket *1
LB Axial foot (made-to-order product)
CB Clevis bracket (pin and snap ring included)
STK FA Rod side flange (made-to-order product)
FB Head side flange
SRL3
H Accessory (available when rod end male thread “N” is selected)
H Accessory I Rod eye
SRG3 *2
Y Rod clevis (pin and snap ring included)

SRM3

SRT3

MRL2

MRG2 Precautions for model No. selection

*1: The mounting bracket is included at shipment.
SM‑25 *2: “I” and “Y” cannot be selected together.

ShkAbs [Example of model No.]

SSD2-KG4L-32-10-T2YD-R-N
FJ
Model: Compact cylinder
Double acting, high load, anti-spatter adherence
FK
● B Bore size : ø32 mm
Spd ● C Stroke length : 10 mm
Contr ● D Switch model No. : Proximity switch for AC magnetic field
T2YD, lead wire length 1 m

Ending ● E Switch quantity : 1 on rod side

● F Option : Rod end male thread

976
 SSD2-KG1/KG4 Series
How to order
How to order switch SCP*3
SW T2YD
CMK2

Switch model No. CMA2

(Item D on page 976)
SCM
[Stroke length table]
Applicable bore size SCG
Stroke length (mm)
25 32 40 50 63 80 100
SCA2
5 ● ● ●
10 ● ● ● ● ● ● ●
SCS2
15 ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● CKV2
25 ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● CAV2/
COVP/N2
35 ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● SSD2
45 ● ● ● ● ● ● ●
50 ● ● ● ● ● ● ● SSG
75 ● ● ● ● ● ●
100 ● ● ● ● ● ● SSD
Min. stroke length (mm) *1 1
CAT
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments
MDC2
*1: Less than 10 mm stroke length is not available.
*2: The total length is the same as that of the next longer standard stroke length.
MVC

SMG
How to order mounting bracket MSD/
Bore size (mm) MSDG
ø25 ø32 ø40 ø50 ø63 ø80 ø100
Mounting bracket
FC*
Flange (FB) SSD2-FA-25 SSD2-G1-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
STK
*1: The foot mounting bracket is provided as 2 pcs./set.

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

977
 SSD2-KG1/KG4 Series
SCP*3
Internal structure and parts list
● SSD2-KG1L/KG4L-25 ● SSD2-KG1L/KG4L-32 to 50
CMK2 (double acting/single rod high load/anti-spatter adherence/with switch) (double acting/single rod high load/anti-spatter adherence/with switch)

CMA2
1 3 5 2 6 4 7 8 10 9 12 13 15 16 14 11 17 1 3 5 2 6 4 7 8 10 9 12 13 15 16 14 11 17

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-KG1/KG4-25 ● SSD2-KG1/KG4-32 to 50

(double acting/single rod/high load/anti-spatter adherence) (double acting/single rod/high load/anti-spatter adherence)

CAT
1 3 5 2 6 4 7 8 10 9 15 16 14 11 17 1 3 5 2 6 4 7 8 10 9 15 16 14 11 17
MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
No. Part name Material Remarks No. Part name Material Remarks
SRM3 ø25: Stainless steel Industrial chrome 10 Cushion rubber R Urethane rubber
1 Piston rod
ø32 to ø50: Steel plating 11 Cushion rubber H Urethane rubber
SRT3 2 C type snap ring for hole Steel Zinc phosphate 12 Spacer Aluminum alloy ø25, ø32: Chromate
3 Coil scraper Phosphor bronze 13 Magnet Plastic
MRL2 4 Rod metal gasket Nitrile rubber 14 Piston Aluminum alloy Chromate
5 Lube keeping structure Special rubber G4 only 15 Piston packing Nitrile rubber
MRG2 6 Rod metal Special aluminum Alumite 16 Wear ring Polyacetal resin
7 Rod packing Nitrile rubber ø25: Stainless steel
17 Cover ø32 to ø50: Alumite
SM‑25 8 Bush Oiles drymet ø32 to 50: Aluminum alloy
9 Body Aluminum alloy Hard alumite
ShkAbs

FJ
Repair parts list
Part name
FK Kit No. Repair parts No.
Bore size (mm)
Spd ø25 SSD2-KG1-25K
Contr ø32 SSD2-KG1-32K 3 4 7

ø40 SSD2-KG1-40K 10 11 15 16
Ending ø50 SSD2-KG1-50K

978
 SSD2-KG1/KG4 Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-KG1L/KG4L-63 to 100 (double acting/single rod high load/anti-spatter adherence/with switch)
CMK2

1 3 5 2 7 4 6 8 10 9 12 13 15 16 14 11 17 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-KG1/KG4-63 to 100 (double acting/single rod high load/anti-spatter adherence) SSD

CAT
1 3 5 2 7 4 6 8 10 9 15 16 14 11 17
MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 10 Cushion rubber R Urethane rubber
2 C type snap ring for hole Steel Zinc phosphate 11 Cushion rubber H Urethane rubber MRL2
3 Coil scraper Phosphor bronze 12 Spacer Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 13 Magnet Plastic MRG2
5 Lube keeping structure Special rubber G4 only 14 Piston Aluminum alloy Chromate
6 Rod metal Aluminum alloy Chromate 15 Piston packing Nitrile rubber SM‑25
7 Rod packing Nitrile rubber 16 Wear ring Polyacetal resin
8 Bush Oiles drymet 17 Cover Aluminum alloy Alumite ShkAbs
9 Body Aluminum alloy Hard alumite
FJ
Repair parts list FK
Part name
Kit No. Repair parts No.
Bore size (mm) Spd
ø63 SSD2-KG1-63K Contr
3 4 7 10
ø80 SSD2-KG1-80K
ø100 SSD2-KG1-100K
11 15 16 Ending

979
 SSD2-KG1/KG4 Series
SCP*3
Dimensions
● SSD2-KG1L/KG4L-25 to 100 (with switch/T0H/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2
F A + stroke length a’ wf
CMA2 c’
N WF B + stroke length
8-J T
SCM Mounting hole H KK UA C 2-EE D

SCG
O

øMM
HD

SCA2

øMM
øUB
G

FB
N

kk’ Width across flats M

F

SCS2
Width across flats H

CKV2
CAV2/ FA RD 8-KA

øI
COVP/N2
M
SSD2

SSG

SSD
Code Dimensions with switch
Bore size A *1
CAT B *1
C D EE F FA FB G H I J K KA
(mm) G1 G4
ø25 52.5 52.5 47.5 11 6 M5 40 31.5 17 - - 5.5 9 spot face depth 5.5 51 M6 depth 11
MDC2
ø32 55 60 43 8 8 Rc1/8 45 33.5 24 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11
ø40 61.5 66.5 49.5 12 8.5 Rc1/8 52 37 31 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11
MVC
ø50 63.5 68.5 50.5 10.5 10.5 Rc1/4 64 43 32 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13
ø63 69 74 56 13 11 Rc1/4 77 49.5 32 84 23 8.7 14 spot face depth 9 103 M10 depth 25
SMG
ø80 78.5 83.5 63.5 16 13 Rc3/8 98 60 32 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28
MSD/ ø100 90 95 73 23 15 Rc3/8 117 69.5 32 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28
MSDG Code Dimensions with switch Proximity T2YD
Bore size UA WF
FC* KK M MM N O UB HD RD *2
(mm) G1 G4 G1 G4
ø25 M6 depth 12 10 12 28 - - - - 5 5 2 20
STK
ø32 M8 depth 13 14 16 34 4.5 5 10 23 h9 12 17 4.5 20.5
ø40 M8 depth 13 14 16 40 5 5 10 28 h9 12 17 8 23.5
SRL3
ø50 M10 depth 15 17 20 50 7 5 10 35 h9 13 18 9 23.5
ø63 M10 depth 15 17 20 60 7 5 10 35 h9 13 18 13 24
SRG3
ø80 M16 depth 21 22 25 77 6 5 10 43 h9 15 20 19 26.5

SRM3 ø100 M20 depth 27 27 30 94 6.5 5 10 59 h9 17 22 24.5 30.5

*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
SRT3 *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
MRL2
● Rod end male thread
MRG2 Code wf
a’ c’ H kk’ M MM T
Bore size (mm) G1 G4
SM‑25 ø25 17.5 15 17 M10×1.25 10 12 6 5 5
ø32 23.5 20.5 22 M14×1.5 14 16 8 10 15
ShkAbs ø40 23.5 20.5 22 M14×1.5 14 16 8 10 15
ø50 28.5 26 27 M18×1.5 17 20 11 10 15
FJ ø63 28.5 26 27 M18×1.5 17 20 11 10 15
ø80 35.5 32.5 32 M22×1.5 22 25 13 13 18
FK ø100 35.5 32.5 41 M26×1.5 27 30 16 13 18

Spd
Contr

Ending

980
 SSD2-KG1/KG4 Series
Dimensions
Dimensions SCP*3
● SSD2-KG1/KG4-25 to 100 (without switch) ● Rod end male thread
CMK2
F A + stroke length a’ wf
c’ CMA2
N WF B + stroke length
8-J T
Mounting hole H UA C D
2-EE SCM
KK
SCG
O

øMM
SCA2

øMM
øUB
G

kk’ Width across flats M

N
F

SCS2
Width across flats H

CKV2

M CAV2/

øI
8-KA COVP/N2

SSD2

SSG

SSD
Code Dimensions without switch
Bore size A *1, *4
B *1, *4 C D EE *5 F G H I J K KA CAT
(mm) G1 G4
ø25 42.5 42.5 37.5 11 6 M5 40 - - 5.5 9 spot face depth 5.5 51 M6 depth 11
MDC2
ø32 45(55) 50(60) 33(43) 10 5.5 Rc1/8 45 49.5 12.5 5.5 9 spot face depth 5.5 60 M6 depth 11
ø40 51.5(61.5) 56.5(66.5) 39.5(49.5) 11.5 8 Rc1/8 52 57 15 5.5 9 spot face depth 5.5 69 M6 depth 11
MVC
ø50 53.5(63.5) 58.5(68.5) 40.5(50.5) 10.5 10.5 Rc1/4 64 71 18 6.9 11 spot face depth 6.5 86 M8 depth 13
ø63 59(69) 64(74) 46(56) 13 11 Rc1/4 77 84 23 8.7 14 spot face depth 9 103 M10 depth 25
SMG
ø80 68.5(78.5) 73.5(83.5) 53.5(63.5) 16 13 Rc3/8 98 104 31 10.5 17.5 spot face depth 11 132 M12 depth 28
ø100 80(90) 85(95) 63(73) 23 15 Rc3/8 117 123.5 38 10.5 17.5 spot face depth 11 156 M12 depth 28 MSD/
Code Dimensions without switch MSDG
Bore size UA WF
KK M MM N O UB FC*
(mm) G1 G4 G1 G4
ø25 M6 depth 12 10 12 28 - - - - 5 5
STK
ø32 M8 depth 13 14 16 34 4.5 5 10 23 h9 12 17
ø40 M8 depth 13 14 16 40 5 5 10 28 h9 12 17
SRL3
ø50 M10 depth 15 17 20 50 7 5 10 35 h9 13 18
ø63 M10 depth 15 17 20 60 7 5 10 35 h9 13 18
SRG3
ø80 M16 depth 21 22 25 77 6 5 10 43 h9 15 20
ø100 M20 depth 27 27 30 94 6.5 5 10 59 h9 17 22 SRM3
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
SRT3
*3 : For dimensions of individual accessories, refer to pages 1046 to 1049.
*4 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm. MRL2
*5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MRG2
● Rod end male thread
Code wf SM‑25
a’ c’ H kk’ M MM T
Bore size (mm) G1 G4
ø25 17.5 15 17 M10×1.25 10 12 6 5 5
ShkAbs
ø32 23.5 20.5 22 M14×1.5 14 16 8 10 15
ø40 23.5 20.5 22 M14×1.5 14 16 8 10 15
FJ
ø50 28.5 26 27 M18×1.5 17 20 11 10 15
ø63 28.5 26 27 M18×1.5 17 20 11 10 15
FK
ø80 35.5 32.5 32 M22×1.5 22 25 13 13 18 Spd
ø100 35.5 32.5 41 M26×1.5 27 30 16 13 18 Contr

Ending

981
 SSD2-KG1/KG4 Series
SCP*3
Dimensions with mounting bracket
● Clevis bracket (CB)
CMK2 SSD2-KG1(L)/KG4(L)-25 to 100 -CB

CMA2 · ø25 · ø32 to ø100

A + stroke length A + stroke length UB
UB
SCM WF B + stroke length D WF B + stroke length D CB +00.2
CB +00.2 CC
CC H
SCG
R
MR

SCA2
øCA

E
N
N
E

CD
CD

H1
SCS2

0
AC
H

N
10

CJ + stroke length CJ + stroke length Mounting bolt 4-C N

Mounting bolt 4-C E E
CKV2
CAV2/
COVP/N2
Rod end male thread Rod end male thread
SSD2 A + stroke length A + stroke length
a’ wf B + stroke length a’ wf B + stroke length

SSG

SSD

CAT CJ + stroke length

CJ + stroke length

MDC2

MVC

SMG
MSD/
MSDG
Code Common dimensions Female thread
FC*
Without switch With switch
Bore size WF
AC CA CB CC CD D E G H MR N UB A CJ A CJ
STK (mm) B B
G1 G4 G1 G4 G1 G4 G1 G4 G1 G4
ø25 - 24 10.2 14 10 5 40 M6×16 C5 - 28 20 5 5 72.5 72.5 37.5 62.5 62.5 82.5 82.5 47.5 72.5 72.5
SRL3 ø32 4.5 - 18.2 14 10 5 45 M6×16 - 10 34 36 12 17 75 80 33 65 70 85 90 43 75 80
ø40 5 - 18.2 14 10 6 52 M6×16 - 10 40 36 12 17 83.5 88.5 39.5 73.5 78.5 93.5 98.5 49.5 83.5 88.5
SRG3 ø50 6 - 22.2 20 14 7 64 M8×20 - 14 50 44 13 18 95.5 100.5 40.5 81.5 86.5 105.5 110.5 50.5 91.5 96.5
ø63 7 - 22.2 20 14 8 77 M10×25 - 14 60 44 13 18 103 108 46 89 94 113 118 56 99 104

SRM3 ø80 9 - 28.2 27 18 10 98 M12×40 - 18 77 56 15 20 124.5 129.5 53.5 106.5 111.5 134.5 139.5 63.5 116.5 121.5
ø100 12 - 32.2 31 22 13 117 M12×40 - 22 94 64 17 22 147 152 63 125 130 157 162 73 135 140
Code Male thread
SRT3
Without switch With switch
Bore size wf
a’ A CJ A CJ
MRL2 (mm) B B
G1 G4 G1 G4 G1 G4 G1 G4 G1 G4
ø25 17.5 5 5 90 90 37.5 62.5 62.5 100 100 47.5 72.5 72.5
MRG2 ø32 23.5 10 15 96.5 101.5 33 63 68 106.5 111.5 43 73 78
ø40 23.5 15 20 105 110 39.5 71.5 76.5 115 120 49.5 81.5 86.5
SM‑25 ø50 28.5 15 20 121 126 40.5 78.5 83.5 131 136 50.5 88.5 93.5
ø63 28.5 15 20 128.5 133.5 46 86 91 138.5 143.5 56 96 101
ShkAbs ø80 35.5 18 23 158 163 53.5 104.5 109.5 168 173 63.5 114.5 119.5
ø100 35.5 18 23 178.5 183.5 63 121 126 188.5 193.5 73 131 136

FJ

FK
Spd
Contr

Ending

982
 SSD2-KG1/KG4 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Head side flange (FB)
SSD2-KG1(L)/KG4(L)-20 to 100 -FB CMK2

· ø25 · ø32 to ø100 CMA2

FM FM
A + stroke length A + stroke length FL SCM
FL
WF B + stroke length FT N 4-FD
WF B + stroke length FT N
SCG
2-FD

SCA2

FC
FH
FH
N

SCS2
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt CKV2
ø80/ø100: Special bolt
CAV2/
COVP/N2
Rod end male thread
Rod end male thread
A + stroke length A + stroke length
SSD2
a’ wf B + stroke length FT a’ wf B + stroke length FT
SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG
Code Common dimensions Female thread
FC*
Without switch With switch
Bore size WF
FC FD FH FL FM FT N G A A
(mm) B B STK
G1 G4 G1 G4 G1 G4
ø25 - 6.6 42 52 64 8 28 M6×16 5 5 50.5 50.5 37.5 60.5 60.5 47.5
ø32 34 5.5 48 56 65 8 34 M6×16 12 17 53 58 33 63 68 43 SRL3
ø40 40 5.5 54 62 72 8 40 M6×16 12 17 59.5 64.5 39.5 69.5 74.5 49.5
ø50 50 6.6 67 76 89 9 50 M8×20 13 18 62.5 67.5 40.5 72.5 77.5 50.5 SRG3
ø63 60 9 80 92 108 9 60 M10×25 13 18 68 73 46 78 83 56
ø80 77 11 99 116 134 11 77 M12×40 15 20 79.5 84.5 53.5 89.5 94.5 63.5 SRM3
ø100 94 11 117 136 154 11 94 M12×40 17 22 91 96 63 101 106 73
Code Male thread
SRT3
Without switch With switch
Bore size wf
a’ A A
(mm) B B MRL2
G1 G4 G1 G4 G1 G4
ø25 17.5 5 5 68 68 37.5 78 78 47.5
ø32 23.5 10 15 74.5 79.5 33 84.5 89.5 43 MRG2
ø40 23.5 15 20 81 86 39.5 91 96 49.5
ø50 28.5 15 20 88 93 40.5 98 103 50.5 SM‑25
ø63 28.5 15 20 93.5 98.5 46 103.5 108.5 56
ø80 35.5 18 23 113 118 53.5 123 128 63.5 ShkAbs
ø100 35.5 18 23 122.5 127.5 63 132.5 137.5 73

FJ

FK
Spd
Contr

Ending

983
 Compact cylinder double acting/ Compact cylinder double acting/
double rod/coil scraper double rod/anti-spatter adherence

SCP*3
SSD2-DG1 Series SSD2-DG4 Series
● Bore size: ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-DG1/DG4
Item
SSD2-DG1L/DG4L (with switch)
SCA2 Bore size mm ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.2 (≈29 psi, 2 bar) 0.15 (≈22 psi, 1.5 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size Rc1/8 Rc1/4 Rc3/8
+1.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion None
SSD Lubrication Not required (use turbine oil ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.021 0.025 0.092 0.1 0.12 0.27 0.56
CAT

MDC2 Stroke length

Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
MVC 5/10/15/20/25/
ø25 50
30/35/40/45/50
SMG ø32 5/10/15/20/25/30/ 1(10)
ø40 35/40/45/50/75/100 The value in ( ) is for
MSD/
MSDG ø50 types with one or two
10/15/20/25 100
ø63 switches.
FC* 30/35/40/45/50
ø80
75/100
ø100
STK
*1: The custom stroke is available in 1 mm increments.

SRL3
Custom stroke length
SRG3 ● SSD2-DG1, DG4 Series A + stroke length

Standard products B + stroke length

SRM3 Item
Standard stroke length body with spacer
Model No. Refer to How to order.
SRT3
A spacer is added to the standard stroke length body to adjust the
Description
stroke length in 1 mm increments.
MRL2
Bore size Stroke range
MRG2 Stroke range 25 1 to 49
32 to 100 1 to 99
SM‑25 Model No.: SSD2-DG1-32-38
Example of model No. A +2 mm spacer is added to the SSD2-DG1-32-40 standard cylinder
ShkAbs to create 38 mm stroke length. B + stroke length is 90.5mm.

FJ

FK
Spd
Contr

Ending

984
 SSD2-DG1/DG4 Series
Specifications
Switch specifications SCP*3
● Proximity switch for AC magnetic field
Proximity 2-wire CMK2
Item
T2YD/T2YDT
Applications Dedicated for programmable controller CMA2
Indicator lamp Red/green LED (Lit when ON)
Load voltage 24 VDC ±10% SCM
Load current 5 to 20 mA
Internal voltage drop 6 V or less SCG
Leakage current 1.0 mA or less
Output delay time *1
SCA2
60 ms or less
(Delay ON, delay OFF)
SCS2
1m (oil resistant vinyl cabtyre cable
Lead wire length
ø 6, 0.5 mm2 x 2-conductor) *2, *3
CKV2
Insulation resistance 100 MΩ and over at 500 VDC megger
Withstand voltage No failure after 1 minute of 1,000 VAC application. CAV2/
2 COVP/N2
Max. shock resistance 980 m/s
Ambient temperature -10 to +60°C SSD2
Degree of protection JIS C0920 (water-tight), IEC standards IP67, oil resistance
Weight g 1 m:61 3 m:166 5 m:272 SSG
*1: Indicates the time from magnetic sensor detection of the piston magnet until switch output.
*2: 3 m and 5 m lead wires are available as options. SSD
*3: Flame-resistant lead wires are available as options.
*4: This switch cannot be used in DC environments.
CAT

MDC2
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100 MVC
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch
ø25 234 325 249 340 265 356 281 372 297 388 313 403 329 419 344 435 360 461 375 486 - - - - SMG
ø32 308 423 354 468 399 514 446 560 490 605 537 651 584 696 631 741 678 786 725 831 960 1056 1195 1281
MSD/
ø40 446 589 473 616 499 642 526 669 553 696 579 732 606 754 632 775 659 802 685 828 818 961 950 1093 MSDG
ø50 - - 746 940 796 989 846 1041 896 1089 946 1139 996 1189 1046 1239 1098 1291 1149 1343 1407 1603 1664 1863
ø63 - - 1203 1567 1278 1642 1353 1717 1428 1792 1503 1867 1579 1943 1654 2018 1729 2093 1804 2168 2179 2543 2554 2918 FC*
ø80 - - 2112 2042 2229 2420 2345 2798 2462 2915 2578 3031 2695 3153 2812 3275 2929 3392 3045 3508 3628 4091 4210 4673
STK
ø100 - - 3153 3775 3322 3924 3490 4072 3659 4256 3828 4440 3997 4604 4165 4767 4334 4931 4503 5095 5348 5915 6193 6735

SRL3

Theoretical thrust table (Unit: N) SRG3

Bore size Operating Working pressure MPa
(mm) direction 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SRM3
ø25 Push/Pull - 75.6 1.13×10 2
1.51×10 2
1.89×10 2
2.27×10 2
2.64×10 2
3.02×10 2
3.40×10 2
3.78×10 2

SRT3
ø32 Push/Pull - 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102
ø40 Push/Pull - 2.11×10 2
3.17×10 2
4.22×10 2
5.28×10 2
6.33×10 2
7.39×10 2
8.44×10 2
9.50×10 2
1.06×10 3
MRL2
ø50 Push/Pull - 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
ø63 Push/Pull 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103 MRG2
ø80 Push/Pull 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103
ø100 Push/Pull 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103 SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

985
 SSD2-DG1/DG4 Series
SCP*3 How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-DG4 32 10 N LB I SSD2-DG1 Double acting/double rod/coil scraper
SSD2-DG1L Double acting/double rod/coil scraper/with switch
With switch (built-in magnet for switch)
SSD2-DG4 Double acting/double rod/anti-spatter adherence
CMA2 SSD2-DG4L 32 10 T2YD R N LB I SSD2-DG4L Double acting/double rod/anti-spatter adherence/with switch

SCM
B Bore size (mm)
25 ø25
A Model No. 32 ø32
SCG
40 ø40
50 ø50
SCA2 B Bore
63 ø63
size
80 ø80
SCS2 100 ø100
C Stroke length (mm)
CKV2 C Stroke length
Refer to the stroke length table on the following page.
CAV2/
COVP/N2 D Switch model No.
D Switch model No.
Lead wire Lead wire Lead

Proximity Contact

Voltage
SSD2 Display
Straight L-shaped wire
T2YD* - 2-color display
SSG T2YDT* - for AC magnetic field
DC 2-wire
T2YDU (Made-to-order 2-color display (AC magnetic field)
SSD product) Cable connect SW
* Lead wire length
CAT Blank 1 m (standard)
3 3 m (option)
MDC2 5 5 m (option)
E Switch quantity
MVC E Switch quantity R 1 on rod side
H 1 on head side
SMG D 2

MSD/ F Option
F Option Blank Rod end female thread
MSDG
N Rod end male thread
FC*
G Mounting bracket
G Mounting bracket Blank Without mounting bracket
STK *1 LB Axial foot (made-to-order product)
FA Rod side flange (made-to-order product)
SRL3
H Accessory (available when rod end male thread “N” is selected)
H Accessory
I Rod eye
SRG3 *2
Y Rod clevis (pin and snap ring included)

SRM3
How to order switch
SRT3
SW T2YD
MRL2

MRG2 Switch model No.

Precautions for model No. selection (Item D above)
*1: The mounting bracket is included at shipment.
SM‑25 *2: “I” and “Y” cannot be selected together.

ShkAbs [Example of model No.]

SSD2-DG4L-32-10-T2YD-R-N
FJ
Model: Compact cylinder
Double acting, double rod, anti-spatter adherence
FK
● B Bore size : ø32 mm
Spd ● C Stroke length : 10 mm
Contr ● D Switch model No. : Proximity switch for AC magnetic field
T2YD, lead wire length 1 m

Ending ● E Switch quantity : 1 on rod side

● F Option : Rod end male thread
986
 SSD2-DG1/DG4 Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
25 32 40 50 63 80 100 CMK2
5 ● ● ●
10 ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1: Less than 10 mm stroke length is not available.
*2: The total length is the same as that of the next longer standard stroke length. SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

987
 SSD2-DG1/DG4 Series
SCP*3
Internal structure and parts list
● SSD2-DG1L/DG4L-25 to 50 (double acting/double rod/anti-spatter adherence/with switch)
CMK2

CMA2

SCM 1 3 4 2 6 7 5 8 12 13 9 10 11

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD ● SSD2-DG1/DG4-25 to 50 (double acting/double rod/anti-spatter adherence)

CAT

MDC2 1 3 4 2 6 7 5 8 9 10 11

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3 No. Part name Material Remarks No. Part name Material Remarks
ø25: Stainless steel Industrial chrome 8 Body Aluminum alloy Hard alumite
1 Piston rod A
MRL2 ø32 to ø50: Steel plating 9 Piston packing Nitrile rubber
2 C type snap ring for hole Steel Zinc phosphate 10 Piston Aluminum alloy Chromate
MRG2 3 Coil scraper Phosphor bronze ø25: Stainless steel Industrial chrome
11 Piston rod B
4 Lube keeping structure Special rubber G4 only ø32 to ø50: Steel plating
SM‑25 5 Rod metal gasket Nitrile rubber 12 Spacer Aluminum alloy ø25, ø32: Chromate
6 Rod metal Aluminum alloy Alumite 13 Magnet Plastic
ShkAbs 7 Rod packing Nitrile rubber

FJ
Re pa i r p a r t s l i st
Part name
FK Kit No. Repair parts No.
Bore size (mm)
Spd ø25 SSD2-DG1-25K
Contr ø32 SSD2-DG1-32K
3 5 7 9
ø40 SSD2-DG1-40K
Ending ø50 SSD2-DG1-50K

988
 SSD2-DG1/DG4 Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-DG1L/DG4L-63 to 100 (double acting/double rod/anti-spatter adherence/with switch)
CMK2
1 2 4 3 7 6 5 8 9 14 13 10 11 12
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-DG1/DG4-63 to 100 (double acting/double rod/anti-spatter adherence) SSD

1 2 4 3 7 6 5 8 9 10 11 12 CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

No. Part name Material Remarks No. Part name Material Remarks MRL2
1 Piston rod A Steel Industrial chrome plating 8 Bush Oiles drymet
2 Coil scraper Phosphor bronze 9 Body Aluminum alloy Hard alumite MRG2
3 C type snap ring for hole Steel Zinc phosphate 10 Piston packing Nitrile rubber Chromate
4 Lube keeping structure Special rubber G4 only 11 Piston Aluminum alloy Chromate SM‑25
5 Rod metal gasket Nitrile rubber 12 Piston rod B Steel Industrial chrome plating
6 Rod metal Aluminum alloy Chromate 13 Spacer Aluminum alloy Chromate ShkAbs
7 Rod packing Nitrile rubber 14 Magnet Plastic
FJ
Re p a i r p a r t s l i st FK
Part name
Kit No. Repair parts No.
Bore size (mm) Spd
ø63 SSD2-DG1-63K Contr
ø80 SSD2-DG1-80K 2 5 7 10
Ending
ø100 SSD2-DG1-100K

989
 SSD2-DG1/DG4 Series
SCP*3
Dimensions
● SSD2-DG1L/DG4L-25 (with switch) ● Rod end male thread
CMK2 17.5 5
15
CMA2 6

SCM

ø12
SCG

SCA2 10 (width across flats)

M10×1.25
17 (width across flats)
SCS2

CKV2 A + (2 × stroke length)

5 B + stroke length 5 + stroke length

CAV2/ 40
COVP/N2 11 11
28
8-9 spot face depth 5.5 2-M5
SSD2 Mounting hole
HD
1
ø5
SSG 2-M6 depth 12

SSD
40

28

17

12

CAT

MDC2 ø5.5

MVC 31.3 RD
8-M6 depth 11

10
SMG
MSD/
MSDG ● SSD2-DG1/DG4-25 (without switch)

FC* A + (2 × stroke length)

5 B + stroke length 5 + stroke length

STK 40

28 11 11
SRL3 8-9 spot face depth 5.5 2-M5
Mounting hole 1
ø5
SRG3 2-M6 depth 12

SRM3
12
40

28

SRT3

MRL2

MRG2
ø5.5

10 8-M6 depth 11

SM‑25

ShkAbs Code Without switch Dimensions with switch

Bore size (mm) A *1 B *1 A *1 B *1 FA FB RD *2 HD
FJ ø25 59 49 69 59 31.5 17 20 21.5
*1 : To calculate A+ (2 x stroke length), B+ stroke length or 5+ stroke length when using a custom stroke length, apply the next longer standard stroke length (instead
FK of the custom stroke length) to the stroke length value. Left and right projection dimensions of rod differ.
(Example) If the custom stroke length is 17 mm, apply the standard stroke length 20 mm.
Spd *2 : RD dimensions for custom stroke length differ from these dimensions according to the setting.
Contr *3 : For dimensions of individual accessories, refer to pages 1046 to 1049.

Ending

990
 SSD2-DG1/DG4 Series
Double acting/double rod
Dimensions SCP*3
● SSD2-DG1L/DG4L-32 to 100 (with switch) ● Rod end male thread
a’ wf CMK2
A + (2 × stroke length)
F c’
N
WF B + stroke length WF + stroke length
T CMA2
8-J UA C D UA
Mounting hole H
HD SCM
KK

øMM
O

SCG

Width across SCA2

kk’ flats M
G

øMM
2-UB
N

FB
F

Width across flats H

SCS2

CKV2

øI
FA 8-KA CAV2/
RD
M COVP/N2

● SSD2-DG1/DG4-32 to 100 (without switch) SSD2

F A + (2 × stroke length)
WF B + stroke length WF + stroke length SSG
N
8-J UA C D UA
Mounting hole H SSD
KK
CAT
O

MDC2
øMM
2-UB
G
F
N

MVC

SMG
MSD/
øI

M
8-KA
MSDG
Code Without switch Common dimensions with switch
Bore size A *1, *4 A *1 FC*
B *1, *4 B *1 C D EE F FA FB G H I J KA KK
(mm) G1 G4 G1 G4
ø32 54.5(64.5) 64.5(74.5) 30.5(40.5) 64.5 74.5 40.5 8 8 Rc1/8 45 33.5 24 49.5 12.5 5.5 9 spot face depth 5.5 M6 depth 11 M8 depth 13 STK
ø40 64(74) 74(84) 40(50) 74 84 50 12 12 Rc1/8 52 37 31 57 15 5.5 9 spot face depth 5.5 M6 depth 11 M8 depth 13
ø50 66.5(76.5) 76.5(86.5) 40.5(50.5) 76.5 86.5 50.5 10.5 10.5 Rc1/4 64 43 32 71 18 6.9 11 spot face depth 6.5 M8 depth 13 M10 depth 15 SRL3
ø63 68(78) 78(88) 42(52) 78 88 52 13 13 Rc1/4 77 49.5 32 84 23 8.7 14 spot face depth 9 M10 depth 25 M10 depth 15
ø80 81(91) 91(101) 51(61) 91 101 61 16 16 Rc3/8 98 60 32 104 31 10.5 17 spot face depth 11 M12 depth 28 M16 depth 21 SRG3
ø100 94.5(104.5) 104.5(114.5) 60.5(70.5) 104.5 114.5 70.5 23 23 Rc3/8 117 69.5 32 123.5 38 10.5 17.5 spot face depth 11 M12 depth 28 M20 depth 27
SRM3
Code Common dimensions with switch With T2YD switch *1 : To calculate A+ (2 x stroke length), B+ stroke length or WF+
Bore size UA WF stroke length when using a custom stroke length, apply the
M MM N O UB RD *2 HD next longer standard stroke length (instead of the custom
SRT3
(mm) G1 G4 G1 G4 stroke length) to the stroke length value. Left and right
ø32 14 16 34 4.5 5 10 23 h9 12 17 20.5 22 projection dimensions of rod differ. MRL2
ø40 14 16 40 5 5 10 28 h9 12 17 23.5 27.5 (Example) If the custom stroke length is 17 mm, apply
the standard stroke length 20 mm.
ø50 17 20 50 7 5 10 35 h9 13 18 23.5 27.5 *2 : RD dimensions for custom stroke length differ from these MRG2
ø63 17 20 60 7 5 10 35 h9 13 18 24 28.5 dimensions according to the setting.
ø80 22 25 77 6 5 10 43 h9 15 20 26.5 35 *3 : For dimensions of individual accessories, refer to SM‑25
pages 1046 to 1049.
ø100 27 30 94 6.5 5 10 59 h9 17 22 30.5 40.5
*4 : Dimensions in ( ) of codes A and B are for stroke lengths
of more than 50 mm. ShkAbs
● Dimensions of rod end male thread part
Code wf
a’ c’ H kk’ M MM T FJ
Bore size (mm) G1 G4
ø32 23.5 20.5 22 M14×1.5 14 16 8 10 15
FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 10 15
ø50 28.5 26 27 M18×1.5 17 20 11 10 15 Spd
ø63 28.5 26 27 M18×1.5 17 20 11 10 15 Contr
ø80 35.5 32.5 32 M22×1.5 22 25 13 13 18
ø100 35.5 32.5 41 M26×1.5 27 30 16 13 18
Ending

991
 Compact cylinder double acting single rod/environment-resistant scraper

SCP*3
SSD2-G5 Series
● Bore size: ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG
SSD2-G5
Item
SSD2-G5L (with switch)
SCA2
Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
CKV2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)

CAV2/ Min. working pressure MPa 0.2 (≈29 psi, 2 bar) 0.15 (≈22 psi, 1.5 bar)
COVP/N2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)

SSD2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)

Port size M5 Rc1/8 (*1) Rc1/4 Rc3/8
SSG Stroke tolerance mm
+1.0
0
SSD Working piston speed mm/s 50 to 500 50 to 300
Cushion None
CAT Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56
MDC2
*1: T
 he ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

MVC Stroke length Min. stroke length with switch (2 switches)

Bore size Standard stroke Max. stroke Min. stroke Bore size
SMG T0H/V / T5H/V T2H/V / T3H/V
(mm) length (mm) length (mm) length (mm) (mm)
MSD/ ø20 ø20
5/10/15/20/25/
MSDG 50 ø25
30/35/40/45/50
ø25 ø32
FC*
ø32 ø40
5/10/15/20/25/30/35/40 5 5
STK ø50
/45/50/75/100 1
ø40 ø63
SRL3 ø50 100 ø80
ø63 10/15/20/25/30/35/40/4 ø100
SRG3 ø80 5/50/75/100 *1 : Less than 10 mm with the 2-color display, off-delay, AC magnetic
field proof, T1* or T8* switch is not available.
ø100 *2 : Values in ( ) are for the type with 1 on rod side.
SRM3
*1 : For the type with switch, refer to the table of switch mounting quantity and minimum
stroke length.
SRT3 *2 : The custom stroke length is available in 1 mm increments. The total length when using a
custom stroke length is the same as that when using the next longer standard stroke length.

MRL2
Custom stroke length
MRG2
● SSD2-G5 Series A + stroke length

SM‑25 Standard products B + stroke length

Item
Standard stroke length body with spacer
ShkAbs Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
Description
FJ stroke length in 1 mm increments.
Bore size Stroke range
FK Stroke range 20 to 25 1 to 49
Spd 32 to 100 1 to 99
Contr Model No.: SSD2-G5-32-38
Example of model No. A +2 mm spacer is added to the SSD2-G5-32-40 standard
Ending cylinder to create 38 mm stroke length. B + stroke length is 73mm.

992
 SSD2-G5 Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F3PH/F3PV
CMK2
F2S F3S F2H/F2V F2YH/F2YV F3H/F3V F3YH/F3YV
(made to order)
Applications
Dedicated for For programmable Dedicated for For programmable CMA2
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC SCM
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Red/green Red/green
SCG
LED Yellow LED Yellow LED
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
SCA2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29
SCS2
Switch specifications (T type switch)
● 1-color/2-color display/for AC magnetic field proof CKV2
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4) CAV2/
T1H/T1V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT COVP/N2
For programmable Dedicated for programmable For programmable For programmable For programmable controller, For programmable controller, Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve controller controller, relay controller, relay lamp), serial connection relay controller SSD2
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SSG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
Red/green Red/green Yellow Red/green Red/green Red/green
SSD
Indicator LED LED LED LED Without indicator LED
LED LED LED LED LED LED
lamp (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) lamp (Lit when ON)
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) CAT
Leakage ≤ 1 mA at 100 VAC,
1 mA or less 10 μA or less 0 mA 1 mA or less
current ≤ 2 mA at 200 VAC
MDC2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 MVC
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. SMG
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) MSD/
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field. MSDG
*5 : The F type switch uses a bend-resistant lead wire.

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) FC*
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch STK
ø20 95 150 107 182 120 195 133 208 145 220 158 233 171 246 184 259 197 272 210 285 - - - -
ø25 131 222 146 237 162 253 178 269 194 285 209 300 225 316 241 332 257 348 272 363 - - - - SRL3
ø32 185 299 207 321 229 343 251 365 272 386 294 408 316 430 338 452 360 474 381 495 552 600 662 710
ø40 269 412 296 439 322 465 349 492 376 519 402 545 429 572 455 598 482 625 508 651 726 784 858 916 SRG3
ø50 - - 476 670 518 712 560 754 602 796 645 839 687 881 729 923 771 965 813 1007 1160 1217 1370 1427
ø63 - - 703 982 758 1037 813 1092 868 1147 923 1202 999 1258 1074 1313 1150 1369 1144 1423 1332 1696 1709 1973 SRM3
ø80 - - 1240 1653 1327 1740 1413 1826 1500 1908 1586 1990 1673 2082 1760 2173 1847 2265 1933 2346 2701 2754 3136 3211
ø100 - - 1879 2446 1993 2560 2106 2673 2220 2787 2334 2901 2448 3015 2561 3128 2675 3242 2789 3356 3857 3929 4424 4496
SRT3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa MRL2
(mm) direction 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

ø20
Push - 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102 MRG2
Pull - 47.1 70.7 94.2 1.18×102 1.41×102 1.65×102 1.88×102 2.12×102 2.36×102
Push - 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102
SM‑25
Push - 1.61×10 2
2.41×10 2
3.22×10 2
4.02×10 2
4.83×10 2
5.63×10 2
6.43×10 2
7.24×10 2
8.04×10 2
ø32
Pull - 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102 ShkAbs
Push - 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40
Pull - 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103 FJ
Push - 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50
Pull - 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
FK
ø63
Pull 4.20×10 2
5.61×10 2
8.41×10 2
1.12×10 3
1.40×10 3
1.68×10 3
1.96×10 3
2.24×10 3
2.52×10 3
2.80×10 3
Spd
Push 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103
ø80 Contr
Pull 6.80×10 2
9.07×10 2
1.36×10 3
1.81×10 3
2.27×10 3
2.72×10 3
3.17×10 3
3.63×10 3
4.08×10 3
4.54×10 3

Push 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100 Ending
Pull 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

993
 SSD2-G5 Series
SCP*3
How to order Code Description

Without switch (without magnet for switch)

A Model No.
SSD2-G5 Double acting/single rod/environment-resistant scraper (made-to-order product)
CMK2 SSD2-G5 20 5 N LB I SSD2-G5L Double acting/single rod/environment-resistant scraper/switch (MTO)
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-G5L 20 5 T0H R N LB I 20 ø20
SCM 25 ø25
A Model No.
32 ø32
SCG B Bore size 40 ø40
50 ø50
63 ø63
SCA2
80 ø80
100 ø100
SCS2
C Port thread
C Port thread
CKV2 Blank Rc thread/M5 thread
NN NPT thread (ø32 and over) (made-to-order product)
CAV2/ GN G thread (ø32 and over) (made-to-order product)
COVP/N2
D Stroke length (mm)
D Stroke length
SSD2 Refer to the stroke length table on the following page.
SSG E Switch model No.
E Switch model No. Voltage Bore size
Lead wire Lead wire Lead

Contact
*1 Display
Straight L-shaped AC DC Line 20 25 32 40 50 63 80 100
SSD *4
- F2S* ● 2-wire ● ●
- F3S* ● 3-wire ● ●
CAT 1-color display
F2H* F2V* Proximity ● 2-wire ● ●
F3H* F3V* ● 3-wire ● ●
MDC2 F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
2-color display
MVC F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

SMG
T8H* T8V* ● ● 1-color display ● ● ● ● ●
MSD/ T1H* T1V* ● ● ● ● ● ● ● ● ●
2-wire
MSDG T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
T3H* T3V* ● ● ● ● ● ● ● ● ●
3-wire
FC* T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
Proximity

T2WH* T2WV* ● ● ● ● ● ● ● ● ●
STK Precautions for model No. selection T2YH* T2YV* ●
2-wire
● ● ● ● ● ● ● ●
2-color display
*1 : The T8* switch cannot be mounted on the ø20 T3WH* T3WV* ● ● ● ● ● ● ● ● ●
3-wire
to ø32 bore sizes. T3YH* T3YV* ● ● ● ● ● ● ● ● ●
SRL3 *2 : The mounting bracket is included at shipment. T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
‌The WF/wf dimension of the cylinder for “LB” 2-wire
T2YDT* - ● for AC magnetic field ● ● ● ● ● ● ● ●
SRG3 and “FA” is set 10 mm longer than that of
T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
standard products. The number of the
specified protruding dimension will be added * Lead wire length
SRM3 at the end of the model No. printed on the Blank 1 m (standard)
metal plate on the body.
3 3 m (option)
*3 : “I” and “Y” cannot be selected together.
SRT3 5 5 m (option) *5
*4 : Switches are shipped with the product.
Contact CKD if assembling before shipment is F Switch quantity
MRL2 necessary.
*5 : ‌F type switch cannot be selected. R 1 on rod side
H 1 on head side
MRG2
D 2
[Example of model No.]
SM‑25 G Option
SSD2-G5L-32-5-T0H-R-N-LB-I G Option
Blank Rod end female thread
ShkAbs Model: Compact cylinder N Rod end male thread
Double acting/single rod/environment-resistant scraper
H Mounting bracket
B Bore size : ø32 mm H Mounting bracket
FJ C Port thread : Type of Rc thread Blank Without mounting bracket
*2
D Stroke length : 5 mm
LB Axial foot
FK E Switch model : Reed switch T0H
CB Clevis bracket (pin and snap ring included)
No. Lead wire length 1 m FA Rod side flange
Spd F Switch quantity : 1 on rod side FB Head side flange
Contr
G Option : Rod end male thread I Accessory (available when rod end male thread “N” is selected)
H Mounting bracket : Axial foot I Accessory
Ending I Rod eye
I Accessory : Rod eye *3
Y Rod clevis (pin and snap ring included)
994
 SSD2-G5 Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ●
10 ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ●
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color display, off-delay,
AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 992 for the min. stroke length with switch.
*2 : The total length when using a custom stroke length is the same as that when using the next longer standard
stroke length. SSD

CAT

How to order switch MDC2

SW T0H MVC

SMG
Switch model No.
MSD/
(Item E on page 994) MSDG

FC*

STK
How to order mounting bracket
Bore size (mm) SRL3
ø20 ø25 ø32 ø40 ø50 ø63 ø80
Mounting bracket
Foot (LB) SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SRG3
Flange (FA/FB) SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SRM3
Bore size (mm)
ø100 SRT3
Mounting bracket
Foot (LB) SSD2-LB-100
Flange (FA/FB) SSD2-FA-100
MRL2
Clevis bracket (CB) SSD2-CB-100
MRG2
*1: The foot mounting bracket is provided as 2 pcs./set.

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

995
 SSD2-G5 Series
SCP*3
Internal structure and parts list (ø20 to ø50)
● SSD2-G5L-20, 25
CMK2 (double acting/environment-resistant scraper/with switch)

CMA2
1 2 4 3 5 7 8 6 9 10 11 12 13 14
SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG
● SSD2-G5-20, 25
SSD (double acting/environment-resistant scraper)

CAT
1 2 4 3 5 7 8 6 9 12 13 14

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3
Main parts list
No. Part name Material Remarks No. Part name Material Remarks
SRM3
1 Piston rod Stainless steel Industrial chrome plating 9 Body Aluminum alloy Hard alumite
2 C type snap ring Steel Zinc phosphate 10 Spacer Aluminum alloy Chromate
SRT3
3 Rod metal 1 Special aluminum Alumite 11 Magnet Plastic
4 Scraper Nitrile rubber 12 Piston Aluminum alloy Chromate
MRL2
5 Lube keeping structure Special rubber 13 Piston packing Nitrile rubber

MRG2 6 Rod metal Special aluminum Alumite 14 Cover Stainless steel

7 Rod metal gasket Nitrile rubber

SM‑25 8 Rod packing Nitrile rubber

ShkAbs Repair parts list

Part name
FJ Kit No. Repair parts No.
Bore size (mm)
ø20 SSD2-G5-20K
FK ø25 SSD2-G5-25K
4 5 7 8 13

Spd
Contr

Ending

996
 SSD2-G5 Series
Internal structure and parts list
Internal structure and parts list (ø63 to ø100) SCP*3
● SSD2-G5L-32 to 50 ● SSD2-G5L-63 to 100
(double acting/environment-resistant scraper/with switch) (double acting/environment-resistant scraper/with switch) CMK2

1 2 4 3 5 7 8 6 9 10 11 12 13 14 1 2 4 3 5 7 6 8 9 10 11 13 12 14 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

● SSD2-G5-32 to 50 ● SSD2-G5-63 to 100 SSG

(double acting/environment-resistant scraper) (double acting/environment-resistant scraper)
SSD
1 2 4 3 5 7 8 6 9 12 13 14 10 1 4 2 3 5 7 6 8 15 9 13 12 14 10
CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

50 st or less Over 50 st 50 st or less Over 50 st STK

SRL3

Main parts list SRG3

No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod Steel Industrial chrome plating 8 Rod packing Nitrile rubber SRM3
2 C type snap ring Steel Zinc phosphate 9 Body Aluminum alloy Hard alumite
ø32 to ø50: Special aluminum ø32 to ø50: Alumite 10 Spacer Aluminum alloy Chromate SRT3
3 Rod metal 1
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 11 Magnet Plastic
4 Scraper Nitrile rubber 12 Piston Aluminum alloy Chromate MRL2
5 Lube keeping structure Special rubber 13 Piston packing Nitrile rubber
ø32 to ø50: Special aluminum ø32 to ø50: Alumite 14 Cover Aluminum alloy Alumite MRG2
6 Rod metal
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 15 Bush Oiles drymet
7 Rod metal gasket Nitrile rubber SM‑25

ShkAbs
Repair parts list
Part name
Kit No. Repair parts No. FJ
Bore size (mm)
ø32 SSD2-G5-32K
FK
ø40 SSD2-G5-40K
ø50 SSD2-G5-50K Spd
4 5 7 8 13
ø63 SSD2-G5-63K Contr
ø80 SSD2-G5-80K
ø100 SSD2-G5-100K
Ending

997
 SSD2-G5 Series
SCP*3
Dimensions (ø20, ø25)
● SSD2-G5L-20, 25 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2
ø20/ø25 A + stroke length
a’ wf
CMA2 *4 WF B + stroke length
c’
FA T
C D
8-J 2-EE
SCM

øMM
Mounting hole

SCG KK HD

SCA2

øMM
FB
N kk’
F Width across
flats M
SCS2
Width across flats H

CKV2 øK
8-KA

øI
M RD
CAV2/
COVP/N2 N
F
SSD2

SSG
● SSD2-G5-20, 25 (without switch)

SSD
A + stroke length
F
WF B + stroke length
CAT N

8-J C D 2-EE
MDC2 Mounting hole

KK
MVC
øMM

SMG
F
N

MSD/ øK
MSDG

FC* 8-KA øI
M

STK
Code Without switch Common dimensions with switch
SRL3 Bore size A *1 B *1
A *1 B *1
C D EE F FA *4 FB
ø20 34 29.5 44 39.5 18 5.5 M5 36 18.5(22) 12.5
SRG3 ø25 37.5 32.5 47.5 42.5 21 6 M5 40 20.5(24) 13.5

Code Common dimensions with switch

SRM3
Bore size I J K KA KK M MM N WF
ø20 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
SRT3
ø25 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5

MRL2 Switch Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Proximity F2S/F3S
dimensions T5H/T5V T3H/T3V T3WH/T3WV F2YH/F2YV, F3YH/F3YV

MRG2 Bore size HD RD HD RD HD RD HD RD HD RD

ø20 3 17.5 3 17.5 5 19.5 7.5 22 6.5 21
ø25 4 19.5 4 19.5 6 21.5 8.5 24 7.5 23
SM‑25
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the custom stroke
length) to the stroke length value. (Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm.
ShkAbs *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions according to the setting.
*3 : Refer to page 1044 for HD, RD and protruding dimensions of the 2-color display, off-delay, AC magnetic field proof, T1* and T8* switches.
FJ *4 : Dimensions in ( ) of FA are for the radial lead wire.
*5 : For dimensions with individual accessories, refer to pages 1046 to 1049.

FK Rod end male thread

Code
Spd a’ c’ H kk’ M MM T wf
Bore size
Contr
ø20 14 12 13 M8 8 10 5 4.5
ø25 17.5 15 17 M10×1.25 10 12 6 5
Ending

998
 SSD2-G5 Series
Dimensions
Dimensions SCP*3
● SSD2-G5L-32 to 100 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
F A + stroke length a’ wf CMK2
N c’
WF B + stroke length T
H
8-J
C D 2-EE CMA2

øMM
O

Mounting hole
KK
SCM
HD
SCG

øMM
kk’

FB
G

N
F

Width across
flats M SCA2
Width across flats H

SCS2
øK M FA RD øI 8-KA
*4
CKV2
● SSD2-G5-32 to 100 (without switch)
F A + stroke length CAV2/
N WF B + stroke length COVP/N2
H D
C 2-EE
8-J
SSD2
O

Mounting hole
KK
SSG

SSD
øMM
G
F
N

CAT
øK
M 8-KA øI MDC2
Code Without switch Common dimensions with switch
Bore size A *1 B *1
A *1 B *1
C *7
D *7
EE *8
F FA *4 FB G H MVC
ø32 40(50) 33(43) 50 43 18(20) 8(5.5) Rc1/8 45 23(26.5) 20.5 49.5 12.5
ø40 46.5(56.5) 39.5(49.5) 56.5 49.5 22(21.5) 8.5(8) Rc1/8 52 26.5(30) 27.5 57 15 SMG
ø50 48.5(58.5) 40.5(50.5) 58.5 50.5 20.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18
MSD/
ø63 54(64) 46(56) 64 56 23 11 Rc1/4 77 39(42.5) 28.5 84 23
MSDG
ø80 63.5(73.5) 53.5(63.5) 73.5 63.5 26 13 Rc3/8 98 49.5(53) 28.5 104 31
ø100 75(85) 63(73) 85 73 33 15 Rc3/8 117 59(62.5) 28.5 123.5 38 FC*
Code Common dimensions with switch
Bore size I J K KA KK M MM N O WF STK
ø32 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 7
ø40 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7 SRL3
ø50 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8
ø63 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15 17 20 60 7 8 SRG3
ø80 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21 22 25 77 6 10
ø100 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12
SRM3
*1 : To calculate A+ stroke length or B+ stroke length when using
Switch dimensions Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2WH/T2WV, T3WH/T3WV
custom stroke length, apply the next longer standard stroke
Bore size HD RD HD RD HD RD length (instead of the custom stroke length) to the stroke length SRT3
ø32 4 19.5 4 19.5 6 21.5 value. (Example) If the custom stroke length is 7 mm, apply the
ø40 7 22 7 22 8.5 23.5
standard stroke length of 10 mm.
*2 : ‌HD and RD dimensions for 5 mm stroke length differ from MRL2
ø50 7.5 22.5 7.5 22.5 9 24 these dimensions according to the setting.
ø63 12.5 23 12.5 23 14 24.5 *3 : Refer to page 1044 for HD, RD and protruding
dimensions of the 2-color display, off-delay, AC
MRG2
ø80 17.5 25.5 17.5 25.5 19 27
magnetic field proof, T1* and T8* switches.
ø100 23 29.5 23 29.5 24.5 31 *4: Dimensions in ( ) of FA are for the radial lead wire.
SM‑25
*5 : For dimensions of individual accessories, refer to
pages 1046 to 1049.
*6 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm. ShkAbs
*7 : ‌Dimensions in ( ) of codes C and D are when the value is
for a 5 mm stroke without switch.
*8: ‌ The ø32 bore size with a 5 mm stroke and without a switch FJ
Rod end male thread has a port size of M5.
Code FK
a’ c’ H kk’ M MM T wf
Bore size
ø32 23.5 20.5 22 M14×1.5 14 16 8 5 Spd
ø40 23.5 20.5 22 M14×1.5 14 16 8 5 Contr
ø50 28.5 26 27 M18×1.5 17 20 11 5
ø63 28.5 26 27 M18×1.5 17 20 11 5 Ending
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
ø100 35.5 32.5 41 M26×1.5 27 30 16 8 999
 SSD2-G5 Series
SCP*3
Dimensions with mounting bracket
● Axial foot (LB)
CMK2 SSD2-G5(L)-20 to 100 -LB
· ø20/ø25 · ø32 to ø100 A + stroke length
CMA2 A + stroke length WF B + stroke length M
WF B + stroke length M
N
SCM

AG
SCG
AG
N

AH
AT
AH

AT
AD
SCA2

AE
Low head hexagon
AU socket bolt 8-G AU
TR N Low head hexagon socket bolt 4-G
4-øAB AK 4-øAB AK
SCS2 TS TR
LF LX + stroke length TS LF LX + stroke length

CKV2 A + stroke length

Rod end male thread Rod end male thread
A + stroke length a’ wf B + stroke length
CAV2/
a’ wf B + stroke length
COVP/N2

SSD2

SSG

LF
SSD LF

Code Common dimensions Female thread Male thread

CAT Bore size Without switch With switch Without switch With switch
AB AD AE AG AH AK AT AU G N TR TS M LF WF a’ wf
(mm) A B CJ A B CJ A B CJ A B CJ
MDC2 ø20 7 - - 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 20.5 14.5 51.2 29.5 17.5 61.2 39.5 27.5 14 14.5 65.2 29.5 17.5 75.2 39.5 27.5
ø25 7 - - 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 22.5 15 54.7 32.5 17.5 64.7 42.5 27.5 17.5 15 72.2 32.5 17.5 82.2 42.5 27.5
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 25 17 57.2 33 17 67.2 43 27 23.5 15 78.7 33 17 88.7 43 27
MVC ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 25 17 63.7 39.5 23.5 73.7 49.5 33.5 23.5 15 85.2 39.5 23.5 95.2 49.5 33.5
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 29.5 18 66.7 40.5 17.5 76.7 50.5 27.5 28.5 15 92.2 40.5 17.5 102.2 50.5 27.5
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 31 18 73.2 46 20 83.2 56 30 28.5 15 98.7 46 20 108.7 56 30
SMG
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 35 20 85 53.5 23.5 95 63.5 33.5 35.5 18 118.5 53.5 23.5 128.5 63.5 33.5
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 39 22 98 63 29 108 73 39 35.5 18 129.5 63 29 139.5 73 39
MSD/
MSDG ● Clevis bracket (CB)
SSD2-G5(L)-20 to 100 -CB
FC* · ø20/ø25 · ø32 to ø100
A + stroke length A + stroke length UB
UB
STK WF B + stroke length D WF B + stroke length D CB +00.2
CB +00.2 CC
CC H
SRL3
R
MR
øCA

SRG3
E
N
N
E

CD
CD

H1

SRM3
0

N AC
H1

N
0

CJ + stroke length CJ + stroke length Mounting bolt 4-G

Mounting bolt 4-C E E
SRT3 Rod end male thread Rod end male thread
A + stroke length A + stroke length
MRL2 a’ wf B + stroke length a’ wf B + stroke length

MRG2

SM‑25
CJ + stroke length
ShkAbs CJ + stroke length

Code Common dimensions Female thread Male thread

FJ Bore size
AC CA CB CC CD D E G H MR N UB WF
Without switch With switch
a’ wf
Without switch With switch
(mm) A B CJ A B CJ A B CJ A B CJ
ø20 - 20 8.2 12 8 5 36 M6×16 C4 - 25.5 16 4.5 61 29.5 52 71 39.5 62 14 4.5 75 29.5 52 85 39.5 62
FK ø25 - 24 10.2 14 10 5 40 M6×16 C5 - 28 20 5 67.5 32.5 57.5 77.5 42.5 67.5 17.5 5 85 32.5 57.5 95 42.5 67.5
ø32 4.5 - 18.2 14 10 5 45 M6×16 - 10 34 36 7 70 33 60 80 43 70 23.5 5 91.5 33 58 101.5 43 68
Spd ø40 5 - 18.2 14 10 6 52 M6×16 - 10 40 36 7 78.5 39.5 68.5 88.5 49.5 78.5 23.5 5 100 39.5 66.5 110 49.5 76.5
Contr ø50 6 - 22.2 20 14 7 64 M8×20 - 14 50 44 8 90.5 40.5 76.5 100.5 50.5 86.5 28.5 5 116 40.5 73.5 126 50.5 83.5
ø63 7 - 22.2 20 14 8 77 M10×25 - 14 60 44 8 98 46 84 108 56 94 28.5 5 123.5 46 81 133.5 56 91
Ending ø80 9 - 28.2 27 18 10 98 M12×40 - 18 77 56 10 119.5 53.5 101.5 129.5 63.5 111.5 35.5 8 153 53.5 99.5 163 63.5 109.5
ø100 12 - 32.2 31 22 13 117 M12×40 - 22 94 64 12 142 63 120 152 73 130 35.5 8 173.5 63 116 183.5 73 126

1000
 SSD2-G5 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Rod side flange (FA)
SSD2-G5(L)-20 to 100 -FA CMK2
· ø20/ø25 · ø32 to ø100
FM A + stroke length CMA2
FL WF B + stroke length
FM A + stroke length N 4-FD FT
FL WF B + stroke length SCM
N FT

2-FD SCG

FH
FC
SCA2
FH
N

Mounting bolt 4-G

ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt SCS2
Mounting bolt 4-G
Hexagon socket button head bolt
A + stroke length A + stroke length CKV2
a’ wf B + stroke length a’ wf B + stroke length
Rod end male thread Rod end male thread
FT FT CAV2/
COVP/N2

SSD2

SSG
Code Common dimensions Female thread Male thread
Without switch With switch Without switch With switch
SSD
Bore size
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B
ø20 - 6.6 39 48 60 8 25.5 M6×16 14.5 44 29.5 54 39.5 14 14.5 58 29.5 68 39.5 CAT
ø25 - 6.6 42 52 64 8 28 M6×16 15 47.5 32.5 57.5 42.5 17.5 15 65 32.5 75 42.5
ø32 34 5.5 48 56 65 8 34 M6×16 17 50 33 60 43 23.5 15 71.5 33 81.5 43 MDC2
ø40 40 5.5 54 62 72 8 40 M6×16 17 56.5 39.5 66.5 49.5 23.5 15 78 39.5 88 49.5
ø50 50 6.6 67 76 89 9 50 M8×20 18 58.5 40.5 68.5 50.5 28.5 15 84 40.5 94 50.5
ø63 60 9 80 92 108 9 60 M10×25 18 64 46 74 56 28.5 15 89.5 46 99.5 56 MVC
ø80 77 11 99 116 134 11 77 M12×40 20 73.5 53.5 83.5 63.5 35.5 18 107 53.5 117 63.5
ø100 94 11 117 136 154 11 94 M12×40 22 85 63 95 73 35.5 18 116.5 63 126.5 73 SMG

● Head side flange (FB) MSD/

SSD2-G5(L)-20 to 100 -FB MSDG
· ø20/ø25 · ø32 to ø100
FM FM FC*
A + stroke length A + stroke length FL
FL
WF B + stroke length FT N 4-FD
WF B + stroke length FT N STK
2-FD
SRL3
FC
FH
FH
N

SRG3

Mounting bolt 4-G Mounting bolt 4-G SRM3

Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt
Rod end male thread
Rod end male thread ø80/ø100: Special bolt
A + stroke length
SRT3
A + stroke length
a’ wf B + stroke length FT a’ wf B + stroke length FT
MRL2

MRG2

SM‑25

Code Common dimensions Female thread Male thread ShkAbs

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B FJ
ø20 - 6.6 39 48 60 8 25.5 M6×16 4.5 42 29.5 52 39.5 14 4.5 56 29.5 66 39.5
ø25 - 6.6 42 52 64 8 28 M6×16 5 45.5 32.5 55.5 42.5 17.5 5 63 32.5 73 42.5
FK
ø32 34 5.5 48 56 65 8 34 M6×16 7 48 33 58 43 23.5 5 69.5 33 79.5 43
ø40 40 5.5 54 62 72 8 40 M6×16 7 54.5 39.5 64.5 49.5 23.5 5 76 39.5 86 49.5 Spd
ø50 50 6.6 67 76 89 9 50 M8×20 8 57.5 40.5 67.5 50.5 28.5 5 83 40.5 93 50.5 Contr
ø63 60 9 80 92 108 9 60 M10×25 8 63 46 73 56 28.5 5 88.5 46 98.5 56
ø80 77 11 99 116 134 11 77 M12×40 10 74.5 53.5 84.5 63.5 35.5 8 108 53.5 118 63.5
Ending
ø100 94 11 117 136 154 11 94 M12×40 12 86 63 96 73 35.5 8 117.5 63 127.5 73

1001
 Compact cylinder double acting/single rod/high load/environment-resistant scraper

SSD2-KG5 Series
SCP*3 ● Bore size: ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG SSD2-KG5
Item
SSD2-KG5L (with switch)
SCA2 Bore size mm ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Actuation Double acting
SCS2
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
CKV2
Min. working pressure MPa 0.2 (≈29 psi, 2 bar) 0.15 (≈22 psi, 2 bar)
CAV2/ Proof pressure MPa 1.6 (≈230 psi, 16 bar)
COVP/N2 Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
SSD2 Port size M5 Rc1/8 Rc1/4 Rc3/8
+2.0
Stroke tolerance mm 0

SSG Working piston speed mm/s 50 to 500 50 to 300

Cushion Rubber cushion
SSD Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
Allowable absorbed energy J 0.16 0.16 0.40 0.63 0.98 1.56 2.51 3.92
CAT

MDC2 Stroke length Min. stroke length with switch (2 switches)

Bore size Standard stroke Max. stroke Min. stroke Bore size
T0H/V / T5H/V T2H/V / T3H/V
MVC (mm) length (mm) length (mm) length (mm) (mm)
ø20
ø20
SMG 5/10/15/20/25/
50
ø25
30/35/40/45/50 ø32
ø25
MSD/
MSDG ø40
ø32 5 5
5/10/15/20/25/30/35/40/ ø50
FC* 45/50/75/100 1 ø63
ø40
ø80
STK ø50 100
ø100
ø63 10/15/20/25/30/35/40/45
*1 : ‌Less than 10 mm with the 2-color display, off-delay, AC magnetic
SRL3 ø80 /50/75/100 field proof, T1* or T8* switch is not available.
ø100
SRG3 *4 : ‌When using the type with switch, refer to the table of the min. stroke length
with switch.
SRM3
Custom stroke length
SRT3 ● SSD2-KG5 Series A + stroke length
Standard products B + stroke length
MRL2 Item
Standard stroke length body with spacer
Model No. Refer to How to order.
MRG2
A spacer is added to the standard stroke length body to adjust the
Description
SM‑25 stroke length in 1 mm increments.
Bore size Stroke range
ShkAbs Stroke range 20 to 25 1 to 49
32 to 100 1 to 99
FJ Model No.: SSD2-KG5-32-38
Example of model No. A +2 mm spacer is added to the SSD2-KG5-32-40 standard
FK cylinder to create 38 mm stroke length. B + stroke length is 83mm.
Spd
Contr

Ending

1002
 SSD2-KG5 Series
Specifications
Switch specifications (F type switch) SCP*3
● 1-color/2-color display
Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
CMK2
Item F2YH/ F3PH/F3PV F3YH/
F2S F3S F2H/F2V F3H/F3V
F2YV (made to order) F3YV CMA2
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
Output method - NPN output - NPN output PNP output NPN output SCM
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less SCG
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
SCA2
LED Yellow LED Red/green Yellow LED
Red/green
Indicator lamp LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) SCS2
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Weight g 1 m:10 3 m:29 CKV2

Switch specifications (T type switch) CAV2/

COVP/N2
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire SSD2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T0H/T0V T5H/T5V T8H/T8V SSG
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable SSD
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
CAT
Pwr. supp. V. - 10 to 28 VDC -
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
MDC2
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
Red/green Red/green Yellow Red/green Red/green Red/green MVC
Indicator LED LED LED LED Without LED
LED LED LED LED LED LED
lamp (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) indicator lamp (Lit when ON)
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) SMG
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA MSD/
current ≤ 2 mA at 200 VAC less
MSDG
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
FC*
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1. STK
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SRL3
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire.
SRG3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SRM3
(mm) direction 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
SRT3
Push - 62.8 94.2 1.26×102 1.57×102 1.88×102 2.20×102 2.51×102 2.83×102 3.14×102
ø20
Pull - 47.1 70.7 94.2 1.18×10 2
1.41×10 2
1.65×10 2
1.88×10 2
2.12×10 2
2.36×10 2
MRL2
Push - 98.2 1.47×102 1.96×102 2.45×102 2.95×102 3.44×102 3.93×102 4.42×102 4.91×102
ø25
Pull - 75.6 1.13×102 1.51×102 1.89×102 2.27×102 2.64×102 3.02×102 3.40×102 3.78×102 MRG2
Push - 1.61×10 2
2.41×102 3.22×102 4.02×102 4.83×102 5.63×102 6.43×102 7.24×102 8.04×102
ø32
Pull - 1.21×102 1.81×102 2.41×102 3.02×102 3.62×102 4.22×102 4.83×102 5.43×102 6.03×102 SM‑25
Push - 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40
Pull - 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103 ShkAbs
Push - 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103
ø50
Pull - 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103 FJ
Push 4.68×10 2
6.23×10 2
9.35×10 2
1.25×10 3
1.56×10 3
1.87×10 3
2.18×10 3
2.49×10 3
2.81×10 3
3.12×10 3
ø63 FK
Pull 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103
Push 7.54×10 2
1.01×10 3
1.51×10 3
2.01×10 3
2.51×10 3
3.02×10 3
3.52×10 3
4.02×10 3
4.52×10 3
5.03×10 3
Spd
ø80
Pull 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103 Contr
Push 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100 Ending
Pull 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103

1003
 SSD2-KG5 Series
SCP*3 How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2-KG5 20 5 N LB I SSD2-KG5 Double acting/single rod/high load/environment-resistant scraper (made-to-order product)
SSD2-KG5L Double acting/single rod/high load/environment-resistant scraper/switch (MTO)
With switch (built-in magnet for switch)
CMA2 B Bore size (mm)
SSD2-KG5L 20 5 T0H R N LB I 20 ø20
SCM 25 ø25
32 ø32
A Model No. 40 ø40
SCG
50 ø50
63 ø63
SCA2 B Bore size
80 ø80
100 ø100
SCS2 C Port thread
C Port thread
Blank Rc thread/M5 thread
CKV2 N NPT thread (ø32 and over)
CAV2/ G G thread (ø32 and over)
COVP/N2 D Stroke length (mm)
D Stroke length
SSD2 Refer to the stroke length table on the following page.

SSG E Switch model No.

E Switch model No.
Bore size

Contact
Lead wire Lead wire Voltage Lead
*4 Display
Straight L-shaped AC DC wire 20 25 32 40 50 63 80 100
SSD
- F2S* ● 2-wire ● ●
- F3S* ● 3-wire ● ●
CAT 1-color display
● ●
F2H* F2V* Proximity ● 2-wire
F3H* F3V* ● 3-wire ● ●
MDC2 F Switch quantity F3PH* F3PV* ● 1 color display (PNP output) (custom) 3-wire ● ●
F2YH* F2YV* ● 2-wire ● ●
2-color display
MVC F3YH* F3YV* ● 3-wire ● ●
T0H* T0V* ● ● 1-color display ● ● ● ● ● ● ● ●
Reed

SMG T5H* T5V* ● ● Without indicator lamp 2-wire ● ● ● ● ● ● ● ●

T8H* T8V* ● ● 1-color display ● ● ● ● ●
MSD/ G Option ● ● ● ● ● ● ● ● ●
T1H* T1V*
MSDG 2-wire
T2H* T2V* ● 1-color display ● ● ● ● ● ● ● ●
T3H* T3V* ● ● ● ● ● ● ● ● ●
FC* 3-wire
T3PH* T3PV* ● 1-color display (PNP output) ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
Proximity

T2WH* T2WV* ●
STK 2-wire
T2YH* T2YV* ● ● ● ● ● ● ● ● ●
2-color display
T3WH* T3WV* ● ● ● ● ● ● ● ● ●
SRL3 3-wire
T3YH* T3YV* ● ● ● ● ● ● ● ● ●
T2YD* - ● 2-color display ● ● ● ● ● ● ● ●
SRG3 Precautions for model No. selection T2YDT* - ● AC magnetic field
2-wire
● ● ● ● ● ● ● ●
*1 : The mounting bracket is included at shipment. T2JH* T2JV* ● 1-color display off-delay 2-wire ● ● ● ● ● ● ● ●
*2 : “I” and “Y” cannot be selected together. The WF/wf * Lead wire length
SRM3 dimension of the cylinder for “LB” and “FA” is set 10 mm
longer than that of standard products. The number of the Blank 1 m (standard)
SRT3 specified protruding dimension will be added at the end 3 3 m (option)
of the model No. printed on the metal plate on the body. 5 5 m (option) *5
*3 : “I” and “Y” cannot be selected together.
MRL2 *4 : Switches are shipped with the product. F Switch quantity
Contact CKD if assembling before shipment is R 1 on rod side
necessary.
MRG2 H 1 on head side
*5 : F type switch cannot be selected.
D 2
SM‑25 [Example of model No.] G Option
Blank Rod end female thread
ShkAbs
SSD2-KG5L-32-5-T0H-R-N N Rod end male thread
Model: Compact cylinder
Double acting/single rod/high load/environment-resistant scraper
H Mounting bracket
FJ H Mounting
Blank Without mounting bracket
● B Bore size : ø32 mm bracket
● C Port thread : Rc thread *1
LB Axial foot
FK ● D Stroke length : 5 mm CB Clevis bracket (pin and snap ring included)
*2
●
Spd
E Switch model No. : Reed T0H switch FA Rod side flange
Lead wire 1 m FB Head side flange
Contr
● F Switch quantity : 1 on rod side I Accessory (available when rod end male thread “N” is selected)
Ending● G Option : Rod end male thread I Accessory I Rod eye
*3 Rod clevis (pin and snap ring included)
Y
1004
 SSD2-KG5 Series
How to order
[Stroke length table] How to order switch SCP*3
Applicable bore size
Stroke length (mm) SW T0H
20 25 32 40 50 63 80 100 CMK2
5 ● ● ● ●
10 ● ● ● ● ● ● ● ● Switch model No. CMA2
15 ● ● ● ● ● ● ● ● (Item E on page 1004)
Standard stroke length

20 ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● SCG
35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ●
Min. stroke length (mm) *1 1 CAV2/
COVP/N2
Max. stroke length (mm) 50 100
Custom stroke length *2 In 1 mm increments SSD2
*1 : ‌Less than 5 mm for 1-color display switch and less than 10 mm for the 2-color
display, off-delay, AC magnetic field proof, T1* or T8* switch are not available. SSG
Refer to page 1002 for the number of installed switches and the min. stroke length.
*2 : The total length is the same as that of the next longer standard stroke length.
SSD

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) CAT
Stroke length (mm) 5 10 15 20 25 30 35 40 45 50 75 100
Bore size (mm) No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch No switch Switch MDC2
ø20 107 182 120 195 133 208 145 220 158 233 170 245 182 257 195 270 206 281 220 295 - - - -
ø25 146 237 162 253 178 269 194 285 209 300 226 317 242 333 258 349 274 365 290 381 - - - - MVC
ø32 230 344 251 365 272 386 294 408 316 430 338 452 360 474 381 495 403 517 424 538 597 646 705 753
ø40 323 466 349 492 376 519 402 545 428 571 455 598 482 625 508 651 535 678 561 704 779 837 911 969 SMG
ø50 - - 560 754 602 796 645 839 688 882 729 923 771 965 813 1007 855 1049 897 1091 1244 1301 1454 1511
ø63 - - 813 1092 868 1147 923 1202 979 1258 1034 1313 1089 1368 1144 1423 1199 1478 1254 1533 1744 1808 2019 2083 MSD/
ø80 - - 1413 1826 1500 1913 1586 1999 1673 2086 1760 2173 1847 2260 1933 2346 2020 2433 2106 2519 2886 2952 3318 3384 MSDG
ø100 - - 2106 2673 2220 2787 2334 2901 2448 3015 2561 3128 2675 3242 2789 3356 2903 3470 3017 3584 4082 4154 4652 4724
FC*

How to order mounting bracket STK

Bore size (mm)
ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 SRL3
Mounting bracket
Foot (LB) SSD2-LB-20 SSD2-LB-25 SSD2-LB-32 SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Flange (FA/FB) SSD2-FA-20 SSD2-FA-25 SSD2-FA-32 SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
SRG3
Clevis bracket (CB) SSD2-CB-20 SSD2-CB-25 SSD2-CB-32 SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
SRM3
*1: The foot mounting bracket is provided as 2 pcs./set.

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1005
 SSD2-KG5 Series
SCP*3
Internal structure and parts list (ø20 to ø50)
● SSD2-KG5L-20/25 ● SSD2-KG5L-32 to 50
CMK2 (double acting/high load/environment-resistant scraper/with switch) (double acting/high load/environment-resistant scraper/with switch)

CMA2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG ● SSD2-KG5-20/25 ● SSD2-KG5-32 to 50

(double acting/high load/environment-resistant scraper) (double acting/high load/environment-resistant scraper)
SSD
1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3
Main parts list
SRG3 No. Part name Material Remarks No. Part name Material Remarks
ø20/ø25: Stainless steel Industrial chrome 11 Body Aluminum alloy Hard alumite
1 Piston rod
SRM3 ø32 to ø50: Steel plating 12 Spacer Special resin
2 C type snap ring Steel Zinc phosphate 13 Magnet Plastic
SRT3 3 Rod metal 1 Special aluminum Chromate 14 Piston Aluminum alloy Chromate
4 Scraper Nitrile rubber 15 Piston packing Nitrile rubber
MRL2 5 Lube keeping structure Special rubber 16 Wear ring Polyacetal resin
6 Rod metal 2 Special aluminum Alumite 17 Cushion rubber H Urethane rubber
MRG2 7 Rod metal gasket Nitrile rubber ø20/ø25: Stainless steel
18 Cover ø32 to ø50: Alumite
8 Rod packing Nitrile rubber ø32 to ø50: Aluminum alloy
SM‑25 9 Bush Oiles drymet
10 Cushion rubber R Urethane rubber
ShkAbs

FJ
Repair parts list
Part name
Kit No. Repair parts No.
Bore size (mm)
FK
ø20 SSD2-KG5-20K
Spd ø25 SSD2-KG5-25K
4 5 7 8
Contr ø32 SSD2-KG5-32K
10 15 16 17
ø40 SSD2-KG5-40K
Ending ø50 SSD2-KG5-50K

1006
 SSD2-KG5 Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-KG5L-63 to 100 (double acting/high load/environment-resistant scraper/with switch)
CMK2
1 4 2 3 5 8 7 6 9 10 11 12 13 14 15 16 17 18
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD
● SSD2-KG5-63 to 100 (double acting/high load/environment-resistant scraper)

CAT
1 4 2 3 5 8 7 6 9 10 11 14 15 16 17 18

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3
Main parts list
No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 10 Cushion rubber R Urethane rubber
2 C type snap ring Steel Zinc phosphate 11 Body Aluminum alloy Hard alumite MRL2
3 Rod metal 1 Aluminum alloy Chromate 12 Spacer Aluminum alloy Chromate
4 Scraper Nitrile rubber 13 Magnet Plastic MRG2
5 Lube keeping structure Special rubber 14 Piston Aluminum alloy Chromate
6 Rod metal 2 Aluminum alloy Chromate 15 Piston packing Nitrile rubber SM‑25
7 Rod metal gasket Nitrile rubber 16 Wear ring Polyacetal resin
8 Rod packing Nitrile rubber 17 Cushion rubber H Urethane rubber ShkAbs
9 Bush Oiles drymet 18 Cover Aluminum alloy Alumite
FJ
Repair parts list FK
Part name
Kit No. Repair parts No.
Bore size (mm) Spd
ø63 SSD2-KG5-63K Contr
4 5 7 8
ø80 SSD2-KG5-80K
ø100 SSD2-KG5-100K
10 15 16 17 Ending

1007
 SSD2-KG5 Series
SCP*3
Dimensions (ø20, ø25)
● SSD2-KG5L-20, 25 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2
A + stroke length a’ wf
c’
CMA2 *4 WF B + stroke length
T
FA
C D
8-J 2-EE

øMM
SCM Mounting hole

SCG KK HD

SCA2 kk’

øMM
Width across
FB
N
F
flats M
SCS2 Width across flats H

CKV2 øK
8-KA

øI
M RD
CAV2/
COVP/N2 N
F
SSD2
● SSD2-KG5-20, 25 (without switch)
SSG
A + stroke length
F
SSD WF B + stroke length
N
C D
CAT 8-J 2-EE
Mounting hole

MDC2 KK

MVC
øMM
F
N

SMG øK

MSD/
MSDG 8-KA øI
M
FC*
Code Without switch Common dimensions with switch
STK
Bore size A *1 B *1
A *1 B *1
C D EE F FA *4 FB
ø20 39 34.5 49 44.5 18 5.5 M5 36 18.5(22) 12.5
SRL3
ø25 42.5 37.5 52.5 47.5 21 6 M5 40 20.5(24) 13.5

SRG3 Code Common dimensions with switch

Bore size I J K KA KK M MM N WF
SRM3 ø20 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7 8 10 25.5 4.5
ø25 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12 10 12 28 5

SRT3 Switch dimensions Reed/proximity 1-color Proximity 2-color *1 : To calculate A+ stroke length or B+ stroke length when
using custom stroke length, apply the next longer standard
Bore size HD RD HD RD
stroke length (instead of the custom stroke length) to the
MRL2 ø20 6 18.5 4.5 18.5 stroke length value. (Example) If the custom stroke length
ø25 5.5 22 4 22 is 7 mm, apply the standard stroke length of 10 mm.
MRG2 *2 : HD and RD dimensions for 5 mm stroke length differ from
Switch Proximity F2H/V, F3H/V these dimensions according to the setting.
Proximity F2S/F3S
dimensions F2YH/V, F3YH/V *3 : Refer to page 1044 for HD, RD and protruding
SM‑25 Bore size HD RD HD RD dimensions of the 2-color display, off-delay, AC
magnetic field proof, T1* and T8* switches.
ø20 10.5 23 9 23
*4 : Dimensions in ( ) of FA are for the radial lead wire.
ShkAbs ø25 10 26.5 8.5 26.5 *5 : For dimensions of individual accessories, refer to
pages 1046 to 1049.
FJ

FK
Rod end male thread
Spd Code
Contr Bore size
a’ c’ H kk’ M MM T wf

ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

1008
 SSD2-KG5 Series
Dimensions
Dimensions SCP*3
● SSD2-KG5L-32 to 100 (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
F A + stroke length a’ wf CMK2
N c’
WF B + stroke length T
H
C D 2-EE CMA2
8-J

øMM
0

Mounting hole
KK SCM
HD
SCG

øMM
kk’

FB
G

N
F

Width across
flats M SCA2
Width across flats H
SCS2
øK M RD øI 8-KA
FA
*4 CKV2
● SSD2-32 to 100 (without switch) CAV2/
F A + stroke length COVP/N2
N WF B + stroke length
H
C D 2-EE SSD2
8-J
0

Mounting hole
KK SSG

SSD
øMM
G
F

CAT

øK MDC2
M 8-KA øI

Code Without switch Common dimensions with switch MVC

*1 *1 *1 *1 *3
Bore size A B A B C D EE F FA FB G H
ø32 50(60) 43(53) 60 53 18 8 Rc1/8 45 23(26.5) 20.5 49.5 12.5 SMG
ø40 56.5(66.5) 49.5(59.5) 66.5 59.5 22 8.5 Rc1/8 52 26.5(30) 27.5 57 15
MSD/
ø50 58.5(68.5) 50.5(60.5) 68.5 60.5 20.5 10.5 Rc1/4 64 32.5(36) 28.5 71 18
MSDG
ø63 64(74) 56(66) 74 66 23 11 Rc1/4 77 39(42.5) 28.5 84 23
ø80 73.5(83.5) 63.5(73.5) 83.5 73.5 26 13 Rc3/8 98 49.5(53) 28.5 104 31 FC*
ø100 85(95) 73(83) 95 83 33 15 Rc3/8 117 59(62.5) 28.5 123.5 38

Code Common dimensions with switch

STK
Bore size I J K KA KK M MM N O WF
ø32 5.5 9 spot face depth 5.5 60 M6 depth 11 M8 depth 13 14 16 34 4.5 7 SRL3
ø40 5.5 9 spot face depth 5.5 69 M6 depth 11 M8 depth 13 14 16 40 5 7
ø50 6.9 11 spot face depth 6.5 86 M8 depth 13 M10 depth 15 17 20 50 7 8 SRG3
ø63 8.7 14 spot face depth 9 103 M10 depth 25 M10 depth 15 17 20 60 7 8
ø80 10.5 17.5 spot face depth 11 132 M12 depth 28 M16 depth 21 22 25 77 6 10 SRM3
ø100 10.5 17.5 spot face depth 11 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12

*1 : ‌To calculate A+ stroke length or B+ stroke length when

SRT3
Switch dimensions Reed/proximity 1-color Proximity 2-color T8H/V switch
using custom stroke length, apply the next longer standard
Bore size HD RD HD RD HD RD
ø32 8.5 24 7 22.5 - -
stroke length (instead of the custom stroke length) to the MRL2
stroke length value. (Example) If the custom stroke length
ø40 9.5 29.5 8 28 3.5 23.5 is 7 mm, apply the standard stroke length of 10 mm.
ø50 10 30 8.5 28.5 4 24 *2 : HD and RD dimensions for 5 mm stroke length differ from MRG2
these dimensions according to the setting.
ø63 17.5 28 16 26.5 11.5 22
*3 : Dimensions in ( ) of FA are for the radial lead wire.
ø80 22 30.5 20.5 29 16 24.5 SM‑25
*4 : For dimensions of individual accessories, refer to
ø100 28 34.5 26.5 33 22 28.5 pages 1046 to 1049.
*5 : Dimensions in ( ) of codes A and B are for stroke lengths of ShkAbs
Rod end male thread more than 50 mm.

Code FJ
a’ c’ H kk’ M MM T wf
Bore size
ø32 23.5 20.5 22 M14x1.5 14 16 8 5 FK
ø40 23.5 20.5 22 M14x1.5 14 16 8 5
ø50 28.5 26 27 M18x1.5 17 20 11 5 Spd
ø63 28.5 26 27 M18x1.5 17 20 11 5
Contr
ø80 35.5 32.5 32 M22x1.5 22 25 13 8
ø100 35.5 32.5 41 M26x1.5 27 30 16 8
Ending

1009
 SSD2-KG5 Series
SCP*3
Dimensions with mounting bracket
● Axial foot (LB)
CMK2 SSD2-KG5(L)-20 to 100 -LB
· ø20/ø25 · ø32 to ø100 A + stroke length
A + stroke length WF B + stroke length M
CMA2
WF B + stroke length M
N
SCM

AG
SCG
AG
N

AH
AT
AH

AT
AD
Low head hexagon

AE
SCA2 AU socket bolt 8-G AU
TR N Low head hexagon socket bolt 4-G
4-øAB AK 4-øAB AK
TS TR
SCS2 LF LX + stroke length TS LF LX + stroke length

A + stroke length
CKV2 Rod end male thread Rod end male thread
A + stroke length a’ wf B + stroke length
CAV2/ a’ wf B + stroke length
COVP/N2

SSD2

SSG
LF
SSD LF

Code Common dimensions Female thread Male thread

CAT Bore size
AB AD AE AG AH AK AT AU G N TR TS M LF WF
Without switch With switch
a’ wf
Without switch With switch
(mm) A B LX A B LX A B LX A B LX
ø20 7 - - 42 24 15 3.2 9.2 M6×16 25.5 48 62 7.2 20.5 14.5 56.2 34.5 22.5 66.2 44.5 32.5 14 14.5 70.2 34.5 22.5 80.2 44.5 32.5
MDC2 ø25 7 - - 46 26 16.5 3.2 10.7 M6×16 28 52 66 7.2 22.5 15 59.7 37.5 22.5 69.7 47.5 32.5 17.5 15 77.2 37.5 22.5 87.2 47.5 32.5
ø32 7 18.5 13 57 30 17 3.2 11.2 M6×16 34 57 71 7.2 25 17 67.2 43 27 77.2 53 37 23.5 15 88.7 43 27 98.7 53 37
MVC ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 25 17 73.7 49.5 33.5 83.7 59.5 43.5 23.5 15 95.2 49.5 33.5 105.2 59.5 43.5
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 29.5 18 76.7 50.5 27.5 86.7 60.5 37.5 28.5 15 102.2 50.5 27.5 112.2 60.5 37.5
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 31 18 83.2 56 30 93.2 66 40 28.5 15 108.7 56 30 118.7 66 40
SMG ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 35 20 95 63.5 33.5 105 73.5 43.5 35.5 18 128.5 63.5 33.5 138.5 73.5 43.5
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 39 22 108 73 39 118 83 49 35.5 18 139.5 73 39 149.5 83 49
MSD/
MSDG ● Clevis bracket (CB)
SSD2-KG5(L)-20 to 100 -CB
FC* · ø20/ø25 · ø32 to ø100
A + stroke length A + stroke length UB
UB
STK WF B + stroke length D WF B + stroke length D CB +00.2
CB +00.2 CC
CC H
SRL3 MR
R
øCA

E
N

SRG3
N
E

CD
CD

H1
0

SRM3 N AC
H1

N
0

CJ + stroke length CJ + stroke length Mounting bolt 4-G

Mounting bolt 4-C E E
SRT3 Rod end male thread Rod end male thread
A + stroke length A + stroke length
MRL2 a’ wf B + stroke length a’ wf B + stroke length

MRG2

SM‑25
CJ + stroke length
ShkAbs CJ + stroke length

Code Common dimensions Female thread Male thread

FJ Bore size
AC CA CB CC CD D E G H MR N UB WF
Without switch With switch
a’ wf
Without switch With switch
(mm) A B CJ A B CJ A B CJ A B CJ
ø20 - 20 8.2 12 8 5 36 M6×16 C4 - 25.5 16 4.5 66 34.5 57 76 44.5 67 14 4.5 80 34.5 57 90 44.5 67
FK ø25 - 24 10.2 14 10 5 40 M6×16 C5 - 28 20 5 72.5 37.5 62.5 82.5 47.5 72.5 17.5 5 90 37.5 62.5 100 47.5 72.5
ø32 4.5 - 18.2 14 10 5 45 M6×16 - 10 34 36 7 80 43 70 90 53 80 23.5 5 101.5 43 68 111.5 53 78
Spd ø40 5 - 18.2 14 10 6 52 M6×16 - 10 40 36 7 88.5 49.5 78.5 98.5 59.5 88.5 23.5 5 110 49.5 76.5 120 59.5 86.5
Contr ø50 6 - 22.2 20 14 7 64 M8×20 - 14 50 44 8 100.5 50.5 86.5 110.5 60.5 96.5 28.5 5 126 50.5 83.5 136 60.5 93.5
ø63 7 - 22.2 20 14 8 77 M10×25 - 14 60 44 8 108 56 94 118 66 104 28.5 5 133.5 56 91 143.5 66 101
Ending ø80 9 - 28.2 27 18 10 98 M12×40 - 18 77 56 10 129.5 63.5 111.5 139.5 73.5 121.5 35.5 8 163 63.5 109.5 173 73.5 119.5
ø100 12 - 32.2 31 22 13 117 M12×40 - 22 94 64 12 152 73 130 162 83 140 35.5 8 183.5 73 126 193.5 83 136

1010
 SSD2-KG5 Series
Dimensions with mounting bracket
Dimensions with mounting bracket SCP*3
● Rod side flange (FA)
SSD2-KG5(L)-20 to 100 -FA CMK2
· ø20/ø25 · ø32 to ø100
FM A + stroke length CMA2
FL WF B + stroke length
FM A + stroke length N 4-FD FT
FL WF B + stroke length SCM
N FT

2-FD SCG

FH
FC
SCA2
FH
N

Mounting bolt 4-G

ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt SCS2
Mounting bolt 4-G
Hexagon socket button head bolt
A + stroke length A + stroke length CKV2
a’ wf B + stroke length a’ wf B + stroke length
Rod end male thread Rod end male thread
FT FT CAV2/
COVP/N2

SSD2

SSG

Code Common dimensions Female thread Male thread SSD

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B CAT
ø20 - 6.6 39 48 60 8 25.5 M6×16 14.5 49 34.5 59 44.5 14 14.5 63 34.5 73 44.5
ø25 - 6.6 42 52 64 8 28 M6×16 15 52.5 37.5 62.5 47.5 17.5 15 70 37.5 80 47.5
ø32 34 5.5 48 56 65 8 34 M6×16 17 60 43 70 53 23.5 15 81.5 43 91.5 53 MDC2
ø40 40 5.5 54 62 72 8 40 M6×16 17 66.5 49.5 76.5 59.5 23.5 15 88 49.5 98 59.5
ø50 50 6.6 67 76 89 9 50 M8×20 18 68.5 50.5 78.5 60.5 28.5 15 94 50.5 104 60.5
ø63 60 9 80 92 108 9 60 M10×25 18 74 56 84 66 28.5 15 99.5 56 109.5 66 MVC
ø80 77 11 99 116 134 11 77 M12×40 20 83.5 63.5 93.5 73.5 35.5 18 117 63.5 127 73.5
ø100 94 11 117 136 154 11 94 M12×40 22 95 73 105 83 35.5 18 126.5 73 136.5 83
SMG

● Head side flange (FB) MSD/

SSD2-KG5(L)-20 to 100 -FB MSDG
· ø20/ø25 · ø32 to ø100
FC*
FM FM
A + stroke length A + stroke length FL
FL
WF B + stroke length FT N 4-FD STK
WF B + stroke length FT N

2-FD SRL3

SRG3
FC
FH
FH
N

SRM3
Mounting bolt 4-G Mounting bolt 4-G
Hexagon socket button head bolt ø32 to ø63: Hexagon socket button head bolt
Rod end male thread
Rod end male thread
ø80/ø100: Special bolt SRT3
A + stroke length A + stroke length
a’ wf B + stroke length FT a’ wf B + stroke length FT MRL2

MRG2

SM‑25

ShkAbs

Code Common dimensions Female thread Male thread FJ

Bore size Without switch With switch Without switch With switch
FC FD FH FL FM FT N G WF a’ wf
(mm) A B A B A B A B
ø20 - 6.6 39 48 60 8 25.5 M6×16 4.5 47 34.5 57 44.5 14 4.5 61 34.5 71 44.5 FK
ø25 - 6.6 42 52 64 8 28 M6×16 5 50.5 37.5 60.5 47.5 17.5 5 68 37.5 78 47.5
ø32 34 5.5 48 56 65 8 34 M6×16 7 58 43 68 53 23.5 5 79.5 43 89.5 53 Spd
ø40 40 5.5 54 62 72 8 40 M6×16 7 64.5 49.5 74.5 59.5 23.5 5 86 49.5 96 59.5
ø50 50 6.6 67 76 89 9 50 M8×20 8 67.5 50.5 77.5 60.5 28.5 5 93 50.5 103 60.5
Contr
ø63 60 9 80 92 108 9 60 M10×25 8 73 56 83 66 28.5 5 98.5 56 108.5 66
ø80 77 11 99 116 134 11 77 M12×40 10 84.5 63.5 94.5 73.5 35.5 8 118 63.5 128 73.5 Ending
ø100 94 11 117 136 154 11 94 M12×40 12 96 73 106 83 35.5 8 127.5 73 137.5 83

1011
 Compact cylinder double acting/single rod/with strong magnetic field proof switch

SSD2-L4 Series
SCP*3 ● Bore size: ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SSD2-L4
Bore size mm ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2
Max. working pressureMPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CKV2
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CAV2/ Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
COVP/N2 Port size Rc1/8 Rc1/4 Rc3/8
+1.0
SSD2 Stroke tolerance mm 0

Working piston speed mm/s 50 to 500 50 to 300

SSG Cushion None
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
SSD Allowable absorbed energy J 0.092 0.1 0.12 0.27 0.56

CAT
Stroke length
MDC2 Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø40
MVC ø50
20/25/30/35
ø63 100 20
40/45/50/75/100
SMG ø80
ø100
MSD/
MSDG *1: The custom stroke length is available in 1 mm increments. However, the total length is the same as that of the next longer standard stroke length.

FC*
Number of installed switches and min. stroke length (mm)
Switch quantity 1 2
STK
Switch model No.
V0
SRL3 Bore size (mm)
ø40 20 20
SRG3 ø50 20 20
ø63 20 20
SRM3 ø80 20 20
ø100 20 20
SRT3

MRL2 Custom stroke length A + stroke length

● SSD2-L4 Series B + stroke length

MRG2 Standard products
Item
Standard stroke length body with spacer
SM‑25 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
ShkAbs Description
stroke length in 1 mm increments.
Bore size Stroke range
FJ Stroke range
40 to 100 1 to 99

FK Model No.: SSD2-L4-40-38

Example of model No. A +2 mm spacer is added to the SSD2-L4-40-40 standard cylinder to create 38 mm stroke length.
Spd B + stroke length is 89.5mm.
Contr

Ending

1012
 SSD2-L4 Series
Specifications
Switch specifications SCP*3
Reed 2-wire
Item
V0 CMK2
Applications For relay, programmable controller
Load voltage 12/24 VDC 110 VAC
CMA2
Load current 5 to 50 mA 7 to 20 mA
Internal voltage drop 3.0 V or less (with 40 mA load current)
Indicator lamp LED (Lit when ON)
SCM
Leakage current 0 mA
Weight g 1 m:63 3 m:170 5 m:277 SCG

SCA2

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) SCS2
Stroke length (mm)
20 25 30 35 40 45 50 75 100
Bore size (mm) CKV2
ø40 493 520 546 573 599 626 652 785 917
CAV2/
ø50 757 799 841 883 925 967 1009 1219 1429 COVP/N2
ø63 1089 1145 1200 1256 1311 1367 1422 1700 1977
ø80 1822 1909 1996 2083 2170 2257 2344 2779 3214 SSD2
ø100 2665 2779 2892 3006 3119 3233 3346 3914 4481
SSG

SSD
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa CAT
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103 MDC2
ø40
Pull - 1.06×10 1.58×10 2.11×10 3.17×10 4.22×10 5.28×10 6.33×10 7.39×10 8.44×10 9.50×10 1.06×10
2 2 2 2 2 2 2 2 2 2 3

Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 MVC
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
SMG
Push 1.56×10 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103
2
ø63
Pull 1.40×102 2.80×102 4.20×102 5.61×102 8.41×102 1.12×103 1.40×103 1.68×103 1.96×103 2.24×103 2.52×103 2.80×103 MSD/
Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 MSDG
ø80
Pull 2.27×102 4.54×102 6.80×102 9.07×102 1.36×103 1.81×103 2.27×103 2.72×103 3.17×103 3.63×103 4.08×103 4.54×103 FC*
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103
ø100
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103 STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1013
 SSD2-L4 Series
SCP*3 How to order

CMK2 SSD2-L4 50 40 V0 D N LB I

CMA2
Model No.
Code Description
SCM A Bore size (mm)
A Bore size
40 ø40
SCG 50 ø50
63 ø63
SCA2 80 ø80
100 ø100
SCS2 B Stroke length (mm)
B Stroke length Bore size Stroke length *1 Custom stroke length *2
Refer to the stroke length table on the following page.
CKV2 ø40 to ø100 20 to 100 In 1 mm increments
*1 : Refer to page 1012 for the number of installed switches and the min. stroke length.
CAV2/ *2 : The total length when using a custom stroke length is the same as
COVP/N2 that when using the next longer standard stroke length.

SSD2 C Switch model No.

C Switch model No. Lead
Lead wire Voltage
Contact Display
SSG Straight AC DC wire
V0* Reed ● ● 1-color display 2-wire
SSD * Lead wire length
Blank 1 m (standard)
CAT 3 3 m (option)
5 5 m (option)

MDC2 D Switch quantity

D Switch quantity R 1 on rod side
MVC H 1 on head side
D 2
T 3
SMG
E Option
MSD/ E Option Blank Rod end female thread
MSDG N Rod end male thread
Precautions for model No. selection
FC* F Mounting bracket
*1 : The mounting bracket is included at shipment. F Mounting bracket Blank Without mounting bracket
*2 : The projection dimension of piston rod WF when LB or FA *1
STK is selected is different from that of the standard. Refer to
LB Axial foot
*2
the dimensions on page 1017. The number of the CB Clevis bracket (pin and snap ring included)
SRL3 specified protruding dimension will be added at the end of FA Rod side flange
the model No. printed on the metal plate on the body. FB Head side flange
*3 : “I” and “Y” cannot be selected together.
SRG3 G Accessory (available when rod end male thread “N” is selected)
G Accessory
[Example of model No.] *3
I Rod eye
SRM3 SSD2-L4-50-40-V0-D-N-LB-I Y Rod clevis (pin and snap ring included)

Model : Compact cylinder

SRT3
Double acting/single rod/with strong magnetic field proof switch
●
A Bore size : ø50 mm How to order switch
MRL2 ●
B Stroke length : 40 mm
●
C Switch model No. : Reed V0 switch, SW V0
MRG2 Lead wire length 1 m
●
D Switch quantity : 2 pcs. included

SM‑25 ●
E Option : Rod end male thread
●
F Mounting bracket : Axial foot Switch model No.
ShkAbs●
G Accessory : Rod eye (Item C above)

FJ How to order mounting bracket

Bore size (mm)
ø40 ø50 ø63 ø80 ø100
FK Mounting bracket
Foot (LB) SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Spd
Contr Flange (FA/FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
Ending *1: The foot mounting bracket is provided as 2 pcs./set.

1014
 SSD2-L4 Series
Internal structure and parts list
Internal structure and parts list SCP*3
● SSD2-L4-40, 50
CMK2

1 2 3 6 4 5 7 12 8 10 9 11 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-L4-63 to 100 SSD

CAT
1 6 2 3 4 5 13 7 8 12 10 9 11
MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 7 Spacer Aluminum alloy Chromate
2 C type snap ring Stainless steel 8 Magnet Plastic MRL2
ø40, ø50: Special aluminum ø40, ø50: Alumite 9 Piston Aluminum alloy Chromate
3 Rod metal MRG2
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 10 Piston packing Nitrile rubber
4 Rod metal gasket Nitrile rubber 11 Cover Aluminum alloy Alumite
5 Body Aluminum alloy Hard alumite 12 Collar Aluminum alloy SM‑25
6 Rod packing Nitrile rubber 13 Bush Oiles drymet ø63 to ø100 only
ShkAbs

Repair parts list FJ

Bore size (mm) Kit No. Repair parts No.
ø40 SSD2-40K FK
ø50 SSD2-50K
ø63 SSD2-63K 4 6 10 Spd
ø80 SSD2-80K
Contr
ø100 SSD2-100K
Ending

1015
 SSD2-L4 Series
SCP*3
Dimensions
● SSD2-L4-40 to 100 ● Rod end male thread
CMK2

CMA2 FA a’ wf
F 10 c’
SCM N
A + stroke length
T
WF B + stroke length
H
SCG 8-J C D
Mounting hole
HD 2-EE
SCA2 KK
O

øMM
SCS2
kk’
8

Width across
CKV2 Width across flats H
øMM
G

flats M
FB
N
F

CAV2/
COVP/N2

SSD2 8-KA
øK M RD 27 5

øI
SSG

SSD
Code
A B C D EE F FA FB G H I J
Bore size (mm)
CAT
ø40 56.5 49.5 12 8.5 Rc1/8 52 36 31 57 15 5.5 Spot face ø9 depth 5.5
ø50 58.5 50.5 10.5 10.5 Rc1/4 64 42 32 71 18 6.9 Spot face ø11 depth 6.5
MDC2
ø63 64 56 13 11 Rc1/4 77 48.5 32 84 23 8.7 Spot face ø14 depth 9
ø80 73.5 63.5 16 13 Rc3/8 98 59 32 104 31 10.5 Spot face ø17.5 depth 11
MVC
ø100 85 73 23 15 Rc3/8 117 68.5 32 123.5 38 10.5 Spot face ø17.5 depth 11

SMG Code
K KA KK M MM N O WF HD RD
Bore size (mm)
MSD/ ø40 69 M6 depth 11 M8 depth 13 14 16 40 5 7 7.5 13
MSDG ø50 86 M8 depth 13 M10 depth 15 17 20 50 7 8 8.5 13

FC* ø63 103 M10 depth 25 M10 depth 15 17 20 60 7 8 13.5 13.5

ø80 132 M12 depth 28 M16 depth 21 22 25 77 6 10 18.5 16

STK ø100 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12 24 20

*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next longer standard stroke length (instead of the
custom stroke length) to the stroke length value.
SRL3 (Example) If the custom stroke length is 23 mm, apply the standard stroke length 25 mm.
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.
SRG3
● Rod end male thread
SRM3 Code
a’ c’ H kk’ M MM T wf
Bore size (mm)
SRT3 ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5
MRL2 ø63 28.5 26 27 M18×1.5 17 20 11 5
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
MRG2 ø100 35.5 32.5 41 M26×1.5 27 30 16 8

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1016
 SSD2-L4 Series
Double acting/single rod/with strong magnetic field proof switch
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-L4-40 to 100 -LB SSD2-L4-40 to 100 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D
CC
CB +00.2 CMA2

MR
SCM
R
AG

SCG

E
N
AH
AT

CD
AD
AE

H1
AU Low head hexagon socket bolt 4-G SCA2

0
N AC
TR 4-øAB AK CJ + stroke length Mounting bolt 4-G N
TS LF LX + stroke length E
SCS2
Rod end male thread
A + stroke length
A + stroke length
CKV2
Rod end male thread
a’ wf B + stroke length a’ wf B + stroke length
CAV2/
COVP/N2

SSD2

SSG
CJ + stroke length
LF
SSD
Code Common dimensions Code Common dimensions
Bore size (mm) AB AD AE AG AH AK AT AU G N TR TS M LF Bore size (mm) AC CB CC CD D E G MR N UB CAT
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 25 ø40 5 18.2 14 10 6 52 M6×16 10 40 36
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 29.5 ø50 6 22.2 20 14 7 64 M8×20 14 50 44
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 31 ø63 7 22.2 20 14 8 77 M10×25 14 60 44 MDC2
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 35 ø80 9 28.2 27 18 10 98 M12×40 18 77 56
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 39 ø100 12 32.2 31 22 13 117 M12×40 22 94 64 MVC
Code Female thread Male thread Code Female thread Male thread
Bore size (mm) WF A B CJ a’ wf A B CJ Bore size (mm) WF A B CJ a’ wf A B CJ
ø40 17 73.7 49.5 33.5 23.5 15 95.2 49.5 33.5 ø40 7 88.5 49.5 78.5 23.5 5 110 49.5 76.5 SMG
ø50 18 76.7 50.5 27.5 28.5 15 102.7 50.5 27.5 ø50 8 100.5 50.5 86.5 28.5 5 126 50.5 83.5
ø63 18 83.2 56 30 28.5 15 108.7 56 30 ø63 8 108 56 94 28.5 5 133.5 56 91 MSD/
ø80 20 95 63.5 33.5 35.5 18 128.5 63.5 33.5 ø80 10 129.5 63.5 111.5 35.5 8 163 63.5 109.5 MSDG
ø100 22 108 73 39 35.5 18 139.5 73 39 ø100 12 152 73 130 35.5 8 183.5 73 126
FC*
● Rod side flange (FA) ● Head side flange (FB)
SSD2-L4-40 to 100 -FA SSD2-L4-40 to 100 -FB STK
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
N 4-FD WF B + stroke length FT N 4-FD SRL3
FT

SRG3
FH
FC

FH
FC

SRM3
Mounting bolt 4-G
Mounting bolt 4-G SRT3
ø32 to ø63: Hexagon socket button head bolt
ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
ø80/ø100: Special bolt
MRL2
A + stroke length
A + stroke length
Rod end male thread a’ wf B + stroke length Rod end male thread a’ wf B + stroke length FT
FT MRG2

SM‑25

ShkAbs

Code Common dimensions Female thread Male thread Code Common dimensions Female thread Male thread
FJ
Bore size Bore size
FC FD FH FL FM FT N G WF A B a’ wf A B FC FD FH FL FM FT N G WF A B a’ wf A B FK
(mm) (mm)
ø40 40 5.5 54 62 72 8 40 M6×16 17 66.5 49.5 23.5 15 88 49.5 ø40 40 5.5 54 62 72 8 40 M6×16 7 64.5 49.5 23.5 5 86 49.5
ø50 50 6.6 67 76 89 9 50 M8×20 18 68.5 50.5 28.5 15 94 50.5 ø50 50 6.6 67 76 89 9 50 M8×20 8 67.5 50.5 28.5 5 93 50.5
Spd
Contr
ø63 60 9 80 92 108 9 60 M10×25 18 74 56 28.5 15 99.5 56 ø63 60 9 80 92 108 9 60 M10×25 8 73 56 28.5 5 98.5 56
ø80 77 11 99 116 134 11 77 M12×40 20 83.5 63.5 35.5 18 117 63.5 ø80 77 11 99 116 134 11 77 M12×40 10 84.5 63.5 35.5 8 118 63.5
Ending
ø100 94 11 117 136 154 11 94 M12×40 22 95 73 35.5 18 126.5 73 ø100 94 11 117 136 154 11 94 M12×40 12 96 73 35.5 8 127.5 73

1017
 Compact cylinder double acting/single rod
with strong magnetic field proof switch/coil scraper

SCP*3
SSD2-G1L4 Series
● Bore size: ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SSD2-G1L4
Bore size mm ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CKV2
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CAV2/ Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
COVP/N2 Port size Rc1/8 Rc1/4 Rc3/8
+1.0
SSD2 Stroke tolerance mm 0

Working piston speed mm/s 50 to 500 50 to 300

SSG Cushion None
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
SSD Allowable absorbed energy J 0.092 0.1 0.12 0.27 0.56

CAT
Stroke length
MDC2 Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø40
MVC ø50
20/25/30/35/
ø63 100 20
40/45/50/75/100
SMG ø80
ø100
MSD/
MSDG *1: The custom stroke length is available in 1 mm increments. However, the total length is the same as that of the next longer standard stroke length.

FC*
Number of installed switches and min. stroke length (mm)
Switch quantity 1 2 3
STK
Switch model No.
V0
SRL3 Bore size (mm)
ø40 20 20 35
SRG3 ø50 20 20 35
ø63 20 20 35
SRM3 ø80 20 20 35
ø100 20 20 35
SRT3

MRL2 Custom stroke length A + stroke length

● SSD2-G1L4 Series B + stroke length

MRG2 Standard products
Item
Standard stroke length body with spacer
SM‑25 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
ShkAbs Description
stroke length in 1 mm increments.
Bore size Stroke range
FJ Stroke range
40 to 100 1 to 99

FK Model No.: SSD2-G1L4-40-38

Example of model No. A +2 mm spacer is added to the SSD2-G1L4-40-40 standard cylinder to create 38 mm stroke length.
Spd B + stroke length is 89.5mm.
Contr

Ending

1018
 SSD2-G1L4 Series
Specifications
Switch specifications SCP*3
Reed 2-wire
Item
V0 CMK2
Applications For relay, programmable controller
Load voltage 12/24 VDC 110 VAC
CMA2
Load current 5 to 50 mA 7 to 20 mA
Internal voltage drop 3.0 V or less (with 40 mA load current)
Indicator lamp LED (Lit when ON)
SCM
Leakage current 0 mA
Weight g 1 m:63 3 m:170 5 m:277 SCG

SCA2
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) SCS2
20 25 30 35 40 45 50 75 100
Bore size (mm)
ø40 575 602 628 655 681 708 734 867 999 CKV2
ø50 876 918 960 1002 1044 1086 1128 1338 1548
CAV2/
ø63 1240 1296 1351 1407 1462 1518 1573 1851 2128
COVP/N2
ø80 2074 2161 2248 2335 2422 2509 2596 3031 3466
ø100 3000 3114 3227 3341 3454 3568 3681 4249 4816 SSD2

SSG
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SSD
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103 CAT
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103 MDC2
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 102 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103 MVC
ø63
Pull 2.80 × 10 4.20 × 10 5.61 × 10 8.41 × 10 1.12 × 10 1.40 × 10 1.68 × 10 1.96 × 10 2.24 × 10 2.52 × 10 2.80 × 10
2 2 2 2 3 3 3 3 3 3 3

Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103 SMG
ø80
Pull 4.54 × 10 6.80 × 10 9.07 × 10 1.36 × 10 1.81 × 10 2.27 × 10 2.72 × 10 3.17 × 10 3.63 × 10 4.08 × 10 4.54 × 10
2 2 2 3 3 3 3 3 3 3 3
MSD/
Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103 MSDG
ø100
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103
FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1019
 SSD2-G1L4 Series
SCP*3 How to order

CMK2 SSD2-G1L4 50 40 V0 D N LB I

CMA2
Model No.
Code Description
SCM A Bore size (mm)
A Bore
40 ø40
size
SCG 50 ø50
63 ø63
SCA2 80 ø80
100 ø100
SCS2 B Stroke length (mm)
B Stroke length Bore size Stroke length *1 Custom stroke length *2
Refer to the stroke length table on the following page.
CKV2 ø40 to ø100 20 to 100 In 1 mm increments

CAV2/ *1 : Refer to page 1018 for the number of installed switches and the min. stroke length.
COVP/N2 *2 : The total length is the same as that of the next longer standard stroke length.

SSD2 C Switch model No.

C Switch model No. Lead
Lead wire Voltage
Contact Display
SSG Straight AC DC wire
V0* Reed ● ● 1-color display 2-wire
SSD * Lead wire length
Blank 1 m (standard)
CAT 3 3 m (option)
5 5 m (option)

MDC2 D Switch quantity

D Switch quantity R 1 on rod side
MVC H 1 on head side
D 2
T 3
SMG
E Option
MSD/ E Option Blank Rod end female thread
MSDG N Rod end male thread
FC* F Mounting bracket
F Mounting Blank Without mounting bracket
bracket *1
STK LB Axial foot (made-to-order product)
Precautions for model No. selection CB Clevis bracket (pin and snap ring included)
SRL3 FA Rod side flange (made-to-order product)
*1 : The mounting bracket is included at shipment.
FB Head side flange
*2 : “I” and “Y” cannot be selected together.
SRG3 G Accessory (available when rod end male thread “N” is selected)
[Example of model No.] G Accessory
I Rod eye
*2
SRM3 SSD2-G1L4-50-40-V0-D-N-LB-I Y Rod clevis (pin and snap ring included)

Model: Compact cylinder

SRT3 Double acting/with coil scraper/with
strong magnetic field proof switch
MRL2 ●
A Bore size : ø50 mm How to order switch
●
B Stroke length : 40 mm
SW V0
MRG2 ●
C Switch model No. : Reed V0 switch,
Lead wire length 1 m

SM‑25 ●
D Switch quantity : 2 pcs. included
●
E Option : Rod end male thread
Switch model No.
●
F Mounting bracket : Axial foot
ShkAbs ●
G Accessory : Rod eye
(Item C above)

FJ
How to order mounting bracket
FK
Bore size (mm)
ø40 ø50 ø63 ø80 ø100
Spd Mounting bracket
Contr Flange (FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
Ending
*1: The foot mounting bracket is provided as 2 pcs./set.

1020
 SSD2-G1L4 Series
Double acting/single rod with strong magnetic field proof switch/coil scraper
Internal structure and parts list SCP*3
● SSD2-G1L4-40, 50
CMK2

1 2 6 3 5 4 7 12 13 9 8 10 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-G1L4-63 to 100 SSD

CAT
1 2 6 3 5 4 11 7 12 13 8 9 10

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

No. Part name Material Remarks No. Part name Material Remarks SRT3
1 Piston rod Steel Industrial chrome plating 8 Piston packing Nitrile rubber
2 Coil scraper Phosphor bronze 9 Piston Aluminum alloy Chromate MRL2
3 C type snap ring for hole Steel Zinc phosphate 10 Cover Aluminum alloy Chromate
4 Rod metal gasket Nitrile rubber 11 Bush Oiles drymet ø63 to ø100 MRG2
5 Rod metal Aluminum alloy Chromate 12 Spacer Aluminum alloy
6 Rod packing Nitrile rubber 13 Magnet Plastic SM‑25
7 Body Aluminum alloy Hard alumite
ShkAbs
Repair parts list FJ
Part name
Kit No. Repair parts No.
Bore size (mm)
FK
ø40 SSD2-G1-40K
ø50 SSD2-G1-50K Spd
ø63 SSD2-G1-63K 2 4 6 8 Contr
ø80 SSD2-G1-80K
Ending
ø100 SSD2-G1-100K

1021
 SSD2-G1L4 Series
SCP*3
Dimensions
● SSD2-G1L4-40 to 100 ● Rod end male thread
CMK2

FA A + stroke length
CMA2
F 10 WF B + stroke length

SCM N 5 C D
O

H HD
8-J
SCG Mounting hole
2-EE a’ wf

KK c’
SCA2 T

SCS2

øMM

øMM
FB

CKV2
G

N
F

øU

CAV2/
COVP/N2
kk’ Width across flats M
SSD2 M RD 8-KA Width across flats H
øK

øI
SSG

SSD
Code
A B C D EE F FA FB G H I J
Bore size (mm)
CAT
ø40 61.5 49.5 12 8.5 Rc1/8 52 36 31 57 15 5.5 9 spot face depth 5.5
ø50 63.5 50.5 10.5 10.5 Rc1/4 64 42 32 71 18 6.9 11 spot face depth 6.5
MDC2
ø63 69 56 13 11 Rc1/4 77 48.5 32 84 23 8.7 14 spot face depth 9
ø80 78.5 63.5 16 13 Rc3/8 98 59 32 104 31 10.5 17.5 spot face depth 11
MVC
ø100 90 73 23 15 Rc3/8 117 68.5 32 123.5 38 10.5 17.5 spot face depth 11

SMG Code
K KA KK M MM N O U WF HD RD
Bore size (mm)
MSD/ ø40 69 M6 depth 11 M8 depth 13 14 16 40 5 28 h9 12 7.5 13
MSDG ø50 86 M8 depth 13 M10 depth 15 17 20 50 7 35 h9 13 8.5 13

FC* ø63 103 M10 depth 25 M10 depth 15 17 20 60 7 35 h9 13 13.5 13.5

ø80 132 M12 depth 28 M16 depth 21 22 25 77 6 43 h9 15 18.5 16

STK ø100 156 M12 depth 28 M20 depth 27 27 30 94 6.5 59 h9 17 24 20

*1 : The A + stroke length and B + stroke length when using a custom stroke length are the same as those when using the next longer standard
stroke length.
SRL3
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.

SRG3
● Rod end male thread
SRM3 Code a’ c’ H kk’ M MM T wf
Bore size (mm)
SRT3 ø40 23.5 20.5 22 M14×1.5 14 16 8 10
ø50 28.5 26 27 M18×1.5 17 20 11 10

MRL2 ø63 28.5 26 27 M18×1.5 17 20 11 10

ø80 35.5 32.5 32 M22×1.5 22 25 13 13

MRG2 ø100 35.5 32.5 41 M26×1.5 27 30 16 13

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1022
 SSD2-G1L4 Series
Double acting/single rod/with AC magnetic field proof switch/coil scraper
Dimensions with mounting bracket SCP*3
● Clevis bracket (CB)
SSD2-G1L4-40 to 100 -CB CMK2

CMA2
Rod end male thread
UB SCM
A + stroke length
A + stroke length
WF B + stroke length D CB +00.2
CC a’ wf B + stroke length SCG

R
MR SCA2

E
N
SCS2
CD

CKV2
H1

AC
0

CJ + stroke length
CJ + stroke length Mounting bolt 4-G N
E CAV2/
COVP/N2

SSD2

Code Common dimensions Female thread Male thread SSG

Bore size (mm) AC CB CC CD D E G MR N UB WF A B CJ a’ wf A B CJ
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 93.5 49.5 83.5 23.5 5 115 49.5 81.5
SSD
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 105.5 50.5 91.5 28.5 5 131 50.5 88.5
CAT
ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 113 56 99 28.5 5 138.5 56 96
ø80 9 28.2 27 18 10 98 M12×40 18 77 56 10 134.5 63.5 116.5 35.5 8 168 63.5 114.5
MDC2
ø100 12 32.2 31 22 13 117 M12×40 22 94 64 12 157 73 135 35.5 8 188.5 73 131

MVC

SMG
● Head side flange (FB) MSD/
SSD2-G1L4-40 to 100 -FB MSDG

FC*

STK
Rod end male thread
FM SRL3
A + stroke length FL A + stroke length
WF B + stroke length FT N 4-FD a’ wf B + stroke length FT
SRG3

SRM3
FH
FC

SRT3

Mounting bolt 4-G MRL2

ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
MRG2

SM‑25

ShkAbs
Code Common dimensions Female thread Male thread
Bore size (mm) FC FD FH FL FM FT N G WF A B a’ wf A B FJ
ø40 40 5.5 54 62 72 8 40 M6×16 7 69.5 49.5 23.5 5 91 49.5
ø50 50 6.6 67 76 89 9 50 M8×20 8 72.5 50.5 28.5 5 98 50.5 FK
ø63 60 9 80 92 108 9 60 M10×25 8 78 56 28.5 5 103.5 56
ø80 77 11 99 116 134 11 77 M12×40 10 89.5 63.5 35.5 8 123 63.5
Spd
Contr
ø100 94 11 117 136 154 11 94 M12×40 12 101 73 35.5 8 132.5 73

Ending

1023
 Compact cylinder double acting/high load/
with strong magnetic field proof switch

SCP*3
SSD2-KL4 Series
● Bore size: ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SSD2-KL4
Bore size mm ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.1 (≈15 psi, 1 bar) 0.05 (≈7.3 psi, 0.5 bar)
CKV2
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CAV2/ Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
COVP/N2 Port size Rc1/8 Rc1/4 Rc3/8
+2.0
SSD2 Stroke tolerance mm 0

Working piston speed mm/s 50 to 500 50 to 300

SSG Cushion Rubber cushion
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
SSD Allowable absorbed energy J 0.63 0.98 1.56 2.51 3.92

CAT
Stroke length
MDC2 Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø40
MVC ø50
20/25/30/35/40
ø63 100 20
45/50/75/100
SMG ø80
ø100
MSD/
MSDG *1:The custom stroke length is available in 1 mm increments. However, the total length is the same as that of the next longer
standard stroke length.
FC*
Number of installed switches and min. stroke length (mm)
Switch quantity 1 2 3
STK
Switch model No.
V0
SRL3 Bore size (mm)
ø40 20 20 35
SRG3 ø50 20 20 35
ø63 20 20 35
SRM3 ø80 20 20 35
ø100 20 20 35
SRT3

MRL2 Custom stroke length A + stroke length

● SSD2-KL4 Series B + stroke length

MRG2 Standard products
Item
Standard stroke length body with spacer
SM‑25 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
ShkAbs Description
stroke length in 1 mm increments.
Bore size Stroke range
FJ Stroke range
40 to 100 1 to 99

FK Model No.: SSD2-KL4-40-38

Example of model No. A +2 mm spacer is added to the SSD2-KL4-40-40 standard cylinder to create 38 mm stroke length.
Spd B + stroke length is 99.5mm.
Contr

Ending

1024
 SSD2-KL4 Series
Specifications
Switch specifications SCP*3
Reed 2-wire
Item
V0 CMK2
Applications For relay, programmable controller
Load voltage 12/24 VDC 110 VAC
CMA2
Load current 5 to 50 mA 7 to 20 mA
Internal voltage drop 3.0 V or less (with 40 mA load current)
Indicator lamp LED (Lit when ON)
SCM
Leakage current 0 mA
Weight g 1 m:63 3 m:170 5 m:277 SCG

SCA2
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g)
Stroke length (mm) SCS2
20 25 30 35 40 45 50 75 100
Bore size (mm)
ø40 546 573 599 626 652 679 705 838 970 CKV2
ø50 841 883 925 967 1009 1051 1093 1303 1513
CAV2/
ø63 1199 1254 1309 1364 1419 1474 1529 1804 2079
COVP/N2
ø80 1995 2082 2169 2256 2343 2430 2517 2952 3387
ø100 2893 3007 3120 3234 3347 3461 3574 4142 4709 SSD2

SSG
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SSD
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push - 1.26×102 1.88×102 2.51×102 3.77×102 5.03×102 6.28×102 7.54×102 8.80×102 1.01×103 1.13×103 1.26×103
ø40 CAT
Pull - 1.06×102 1.58×102 2.11×102 3.17×102 4.22×102 5.28×102 6.33×102 7.39×102 8.44×102 9.50×102 1.06×103
Push - 1.96×102 2.95×102 3.93×102 5.89×102 7.85×102 9.82×102 1.18×103 1.37×103 1.57×103 1.77×103 1.96×103 MDC2
ø50
Pull - 1.65×102 2.47×102 3.30×102 4.95×102 6.60×102 8.25×102 9.90×102 1.15×103 1.32×103 1.48×103 1.65×103
Push 1.56×102 3.12×102 4.68×102 6.23×102 9.35×102 1.25×103 1.56×103 1.87×103 2.18×103 2.49×103 2.81×103 3.12×103 MVC
ø63
Pull 1.40×10 2.80×10 4.20×10 5.61×10 8.41×10 1.12×10 1.40×10 1.68×10 1.96×10 2.24×10 2.52×10 2.80×10
2 2 2 2 2 3 3 3 3 3 3 3

Push 2.51×102 5.03×102 7.54×102 1.01×103 1.51×103 2.01×103 2.51×103 3.02×103 3.52×103 4.02×103 4.52×103 5.03×103 SMG
ø80
Pull 2.27×10 4.54×10 6.80×10 9.07×10 1.36×10 1.81×10 2.27×10 2.72×10 3.17×10 3.63×10 4.08×10 4.54×10
2 2 2 2 3 3 3 3 3 3 3 3
MSD/
Push 3.93×102 7.85×102 1.18×103 1.57×103 2.36×103 3.14×103 3.93×103 4.71×103 5.50×103 6.28×103 7.07×103 7.85×103 MSDG
ø100
Pull 3.57×102 7.15×102 1.07×103 1.43×103 2.14×103 2.86×103 3.57×103 4.29×103 5.00×103 5.72×103 6.43×103 7.15×103
FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1025
 SSD2-KL4 Series
SCP*3 How to order

CMK2 SSD2-KL4 50 40 V0 D N LB I

CMA2
Model No.
Code Description
SCM A Bore size (mm)
A Bore
40 ø40
size
SCG 50 ø50
63 ø63
SCA2 80 ø80
100 ø100
SCS2 B Stroke length (mm)
B Stroke length Bore size Stroke length *1 Custom stroke length *2
CKV2 ø40 to ø100 20 to 100 In 1 mm increments
*1 : Refer to page 1024 for the number of installed switches and the min.
CAV2/ stroke length.
COVP/N2 *2 : The total length is the same as that of the next longer standard stroke length.

SSD2 C Switch model No.

C Switch model No. Lead
Lead wire Voltage
Contact Display
SSG Straight AC DC wire
V0* Reed ● ● 1-color display 2-wire
SSD * Lead wire length
Blank 1 m (standard)
3 3 m (option)
CAT
5 5 m (option)

MDC2 D Switch quantity

D Switch quantity R 1 on rod side
MVC H 1 on head side
D 2
T 3
SMG
E Option
MSD/ E Option
Blank Rod end female thread
MSDG N Rod end male thread
FC* Precautions for model No. selection F Mounting bracket
F Mounting bracket Blank Without mounting bracket
*1 : The mounting bracket is included at shipment.
*1
STK *2 : The projection dimension of piston rod WF when LB or FA is LB Axial foot
*2
selected is different from that of the standard. Refer to CB Clevis bracket (pin and snap ring included)
the dimensions on page 1029. The number of the FA Rod side flange
SRL3 specified protruding dimension will be added at the end FB Head side flange
of the model No. printed on the metal plate on the body.
SRG3 *3 : “I” and “Y” cannot be selected together. G Accessory (available when rod end male thread “N” is selected)
G Accessory I Rod eye
[Example of model No.] *3
SRM3 Y Rod clevis (pin and snap ring included)
SSD2-KL4-50-40-V0-D-N-LB-I
SRT3 Model: Compact cylinder
Double acting/single high load/
with strong magnetic field proof switch How to order switch
MRL2
●
A Bore size : ø50 mm
●
B Stroke length : 40 mm SW V0
MRG2 ●
C Switch model No. : Reed V0 switch,
Lead wire length 1 m
SM‑25 ●
D Switch quantity : 2 pcs. included
●
E Option : Rod end male thread Switch model No.

ShkAbs ●
F Mounting bracket : Axial foot (Item C above)
●
G Accessory : Rod eye

FJ How to order mounting bracket

Bore size (mm)
FK ø40 ø50 ø63 ø80 ø100
Mounting bracket
Spd Foot (LB) SSD2-LB-40 SSD2-LB-50 SSD2-LB-63 SSD2-LB-80 SSD2-LB-100
Contr Flange (FA/FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
Ending
*1:The foot mounting bracket is provided as 2 pcs./set.

1026
 SSD2-KL4 Series
Double acting/high load/with strong magnetic field proof switch
Internal structure and parts list SCP*3
● SSD2-KL4-40, 50
CMK2

1 2 6 3 4 12 13 5 7 8 9 10 15 14 11 CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

● SSD2-KL4-63 to 100 SSD

CAT
1 6 2 12 4 3 13 5 7 8 9 10 15 14 11

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3
No. Part name Material Remarks No. Part name Material Remarks
1 Piston rod Steel Industrial chrome plating 8 Magnet Plastic SRT3
2 C type snap ring Steel Zinc phosphate 9 Piston Aluminum alloy
ø40, ø50: Special aluminum ø40, ø50: Alumite 10 Piston packing Nitrile rubber MRL2
3 Rod metal
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 11 Cover Aluminum alloy Alumite
4 Rod metal gasket Nitrile rubber 12 Bush Oiles drymet MRG2
5 Body Aluminum alloy Hard alumite 13 Cushion rubber (R) Urethane rubber
6 Rod packing Nitrile rubber 14 Cushion rubber (H) Urethane rubber SM‑25
ø40, ø50: Special resin 15 Wear ring Polyacetal resin
7 Spacer ø63 to ø100: Chromate
ø63 to ø100: Aluminum alloy ShkAbs

FJ
Repair parts list
Bore size (mm) Kit No. Repair parts No.
FK
ø40 SSD2-K-40K
ø50 SSD2-K-50K Spd
4 6 10
ø63 SSD2-K-63K Contr
13 14 15
ø80 SSD2-K-80K
ø100 SSD2-K-100K
Ending

1027
 SSD2-KL4 Series
SCP*3
Dimensions
● SSD2-KL4-40 to 100 ● Rod end male thread
CMK2

CMA2 FA A + stroke length a’ wf

F 10 WF B + stroke length c’
SCM N C D T
8-J H HD 2-EE
SCG Mounting hole

KK
SCA2
O

SCS2

øMM
øMM
G

FB

CKV2
N
F

CAV2/
COVP/N2 kk’

M RD 27 5
SSD2 8-KA Width across flats H Width across flats M
øK

øI
SSG

SSD
Code
A B C D EE F FA FB G H I J
Bore size (mm)
CAT
ø40 66.5 59.5 12 8.5 Rc1/8 52 36 31 57 15 5.5 Spot face ø9 depth 5.5
ø50 68.5 60.5 10.5 10.5 Rc1/4 64 42 32 71 18 6.9 Spot face ø11 depth 6.5
MDC2
ø63 74 66 13 11 Rc1/4 77 48.5 32 84 23 8.7 Spot face ø14 depth 9
ø80 83.5 73.5 16 13 Rc3/8 98 59 32 104 31 10.5 Spot face ø17.5 depth 11
MVC
ø100 95 83 23 15 Rc3/8 117 68.5 32 123.5 38 10.5 Spot face ø17.5 depth 11

SMG Code
K KA KK M MM N O WF HD RD
Bore size (mm)
MSD/ ø40 69 M6 depth 11 M8 depth 13 14 16 40 5 7 12.5 18
MSDG ø50 86 M8 depth 13 M10 depth 15 17 20 50 7 8 13.5 18

FC* ø63 103 M10 depth 25 M10 depth 15 17 20 60 7 8 18.5 18.5

ø80 132 M12 depth 28 M16 depth 21 22 25 77 6 10 23.5 21

STK ø100 156 M12 depth 28 M20 depth 27 27 30 94 6.5 12 29 25

*1 : The A + stroke length and B + stroke length when using a custom stroke length are the same as those when using the next
longer standard stroke length.
SRL3
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.

SRG3

SRM3 ● Rod end male thread

Code
a’ c’ H kk’ M MM T wf
SRT3 Bore size (mm)
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
MRL2 ø50 28.5 26 27 M18×1.5 17 20 11 5
ø63 28.5 26 27 M18×1.5 17 20 11 5
MRG2 ø80 35.5 32.5 32 M22×1.5 22 25 13 8
ø100 35.5 32.5 41 M26×1.5 27 30 16 8
SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1028
 SSD2-KL4 Series
Double acting/high load/with strong magnetic field proof switch
Dimensions with mounting bracket SCP*3
● Axial foot (LB) ● Clevis bracket (CB)
SSD2-KL4-40 to 100 -LB SSD2-KL4-40 to 100 -CB CMK2
A + stroke length A + stroke length UB
WF B + stroke length M WF B + stroke length D
CC
CB +00.2 CMA2

MR
SCM
R
AG

SCG

E
N
AH
AT
AD
AE

CD
AU Low head hexagon socket bolt 4-G AC SCA2

H1
N

0
4-øAB AK N
TR CJ + stroke length Mounting bolt 4-G
TS LF LX + stroke length E
SCS2
Rod end male thread
A + stroke length
Rod end male thread A + stroke length
a’ wf B + stroke length a’ wf B + stroke length
CKV2
CAV2/
COVP/N2

SSD2

CJ + stroke length SSG

LF

Code Common dimensions Code Common dimensions

SSD
Bore size (mm) AB AD AE AG AH AK AT AU G N TR TS M LF Bore size (mm) AC CB CC CD D E G MR N UB
ø40 7 18 13 64 33 18.2 3.2 11.2 M6×16 40 64 78 7.2 25 ø40 5 18.2 14 10 6 52 M6×16 10 40 36 CAT
ø50 9 22 14 78 39 22.7 3.2 14.7 M8×20 50 79 95 8.2 29.5 ø50 6 22.2 20 14 7 64 M8×20 14 50 44
ø63 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 60 95 113 9.2 31 ø63 7 22.2 20 14 8 77 M10×25 14 60 44
ø80 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 77 118 140 11.5 35 ø80 9 28.2 27 18 10 98 M12×40 18 77 56 MDC2
ø100 13 35 24 136 71 35.5 6 23 M12×40 94 137 162 13 39 ø100 12 32.2 31 22 13 117 M12×40 22 94 64
Code Female thread Male thread Code Female thread Male thread MVC
Bore size (mm) WF A B LX a’ wf A B LX Bore size (mm) WF A B CJ a’ wf A B CJ
ø40 17 83.7 59.5 43.5 23.5 15 105.2 59.5 43.5 ø40 7 98.5 59.5 88.5 23.5 5 120 59.5 86.5
ø50 18 86.7 60.5 37.5 28.5 15 112.2 60.5 37.5 ø50 8 110.5 60.5 96.5 28.5 5 136 60.5 93.5
SMG
ø63 18 93.2 66 40 28.5 15 118.7 66 40 ø63 8 118 66 104 28.5 5 143.5 66 101
ø80 20 105 73.5 43.5 35.5 18 138.5 73.5 43.5 ø80 10 139.5 73.5 121.5 35.5 8 173 73.5 119.5 MSD/
ø100 22 118 83 49 35.5 18 149.5 83 49 ø100 12 162 83 140 35.5 8 193.5 83 136 MSDG

FC*
● Rod side flange (FA) ● Head side flange (FB)
SSD2-KL4-40 to 100 -FA SSD2-KL4-40 to 100 -FB
STK
FM A + stroke length FM
FL WF B + stroke length A + stroke length FL
WF B + stroke length FT N 4-FD
SRL3
N 4-FD FT

SRG3
FH
FC

FH
FC

SRM3

Mounting bolt 4-G SRT3

Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt
ø32 to ø63: Hexagon socket button head bolt
ø80/ø100: Special bolt
ø80/ø100: Special bolt
A + stroke length
MRL2
A + stroke length
Rod end male thread a’ wf B + stroke length Rod end male thread a’ wf B + stroke length FT
FT MRG2

SM‑25

ShkAbs

Code Common dimensions Female thread Male thread Code Common dimensions Female thread Male thread
FJ
Bore size Bore size
FC FD FH FL FM FT N G WF A B a’ wf A B FC FD FH FL FM FT N G WF A B a’ wf A B FK
(mm) (mm)
ø40 40 5.5 54 62 72 8 40 M6×16 17 76.5 59.5 23.5 15 98 59.5 ø40 40 5.5 54 62 72 8 40 M6×16 7 74.5 59.5 23.5 5 96 59.5
ø50 50 6.6 67 76 89 9 50 M8×20 18 78.5 60.5 28.5 15 104 60.5 ø50 50 6.6 67 76 89 9 50 M8×20 8 77.5 60.5 28.5 5 103 60.5
Spd
Contr
ø63 60 9 80 92 108 9 60 M10×25 18 84 66 28.5 15 109.5 66 ø63 60 9 80 92 108 9 60 M10×25 8 83 66 28.5 5 108.5 66
ø80 77 11 99 116 134 11 77 M12×40 20 93.5 73.5 35.5 18 127 73.5 ø80 77 11 99 116 134 11 77 M12×40 10 94.5 73.5 35.5 8 128 73.5
Ending
ø100 94 11 117 136 154 11 94 M12×40 22 105 83 35.5 18 136.5 83 ø100 94 11 117 136 154 11 94 M12×40 12 106 83 35.5 8 137.5 83

1029
 Compact cylinder double acting/high load/
with strong magnetic field proof switch/with coil scraper

SCP*3
SSD2-KG1L4 Series
● Bore size: ø40/ø50/ø63/ø80/ø100
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SSD2-KG1L4
Bore size mm ø40 ø50 ø63 ø80 ø100
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CKV2
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CAV2/ Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
COVP/N2 Port size Rc1/8 Rc1/4 Rc3/8
+2.0
SSD2 Stroke tolerance mm 0

Working piston speed mm/s 50 to 500 50 to 300

SSG Cushion Rubber cushion
Lubrication Not required (use turbine oil class 1 ISO VG32 if necessary for lubrication)
SSD Allowable absorbed energy J 0.63 0.98 1.56 2.51 3.92

CAT
Stroke length
MDC2 Bore size (mm) Standard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm)
ø40
MVC ø50
20/25/30/35/40
ø63 100 20
45/50/75/100
SMG ø80
ø100
MSD/
MSDG *1:The custom stroke length is available in 1 mm increments. However, the total length is the same as that of the next longer
standard stroke length.
FC*
Number of installed switches and min. stroke length (mm)
Switch quantity 1 2 3
STK
Switch model No.
V0
SRL3 Bore size (mm)
ø40 20 20 35
SRG3 ø50 20 20 35
ø63 20 20 35
SRM3 ø80 20 20 35
ø100 20 20 35
SRT3

MRL2 Custom stroke length A + stroke length

● SSD2-KG1L4 Series B + stroke length

MRG2 Standard products
Item
Standard stroke length body with spacer
SM‑25 Model No. Refer to How to order.
A spacer is added to the standard stroke length body to adjust the
ShkAbs Description
stroke length in 1 mm increments.
Bore size Stroke range
FJ Stroke range
40 to 100 1 to 99

FK Model No.: SSD2-KG1L4-40-38

Example of model No. A +2 mm spacer is added to the SSD2-KG1L4-40-40 standard
Spd cylinder to create 38 mm stroke length. B + stroke length is 99.5mm.
Contr

Ending

1030
 SSD2-KG1L4 Series
Specifications
Switch specifications SCP*3
Reed 2-wire
Item
V0 CMK2
Applications For relay, programmable controller
Load voltage 12/24 VDC 110 VAC CMA2
Load current 5 to 50 mA 7 to 20 mA
Internal voltage drop 3.0 V or less (with 40 mA load current) SCM
Indicator lamp LED (Lit when ON)
Leakage current 0 mA SCG
Weight g 1 m:63 3 m:170 5 m:277
SCA2

Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.) (Unit: g) SCS2
Stroke length (mm)
20 25 30 35 40 45 50 75 100
Bore size (mm) CKV2
ø40 628 655 681 708 734 761 787 920 1052
CAV2/
ø50 960 1002 1044 1086 1128 1170 1212 1422 1632
COVP/N2
ø63 1350 1406 1461 1517 1572 1628 1683 1961 2238
ø80 2247 2334 2421 2508 2595 2682 2769 3204 3639 SSD2
ø100 3228 3342 3455 3569 3682 3796 3909 4477 5044
SSG

Theoretical thrust table (Unit: N)

SSD
Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 CAT
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103 MDC2
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103
ø50
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103 MVC
Push 3.12 × 10 4.68 × 10 6.23 × 10 9.35 × 10 1.25 × 10 1.56 × 10 1.87 × 10 2.18 × 10 2.49 × 10 2.81 × 10 3.12 × 10
2 2 2 2 3 3 3 3 3 3 3
ø63 SMG
Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
Push 5.03 × 10 7.54 × 10 1.01 × 10 1.51 × 10 2.01 × 10 2.51 × 10 3.02 × 10 3.52 × 10 4.02 × 10 4.52 × 10 5.03 × 10
2 2 3 3 3 3 3 3 3 3 3
MSD/
ø80
Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103 MSDG
Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103
ø100 FC*
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1031
 SSD2-KG1L4 Series
SCP*3 How to order

CMK2 SSD2-KG1L4 50 40 V0 D N LB I

CMA2
Model No.

SCM Code Description

A Bore size (mm)
A Bore
SCG 40 ø40
size
50 ø50
SCA2 63 ø63
80 ø80
100 ø100
SCS2
B Stroke length (mm)
B Stroke length Bore size Stroke length *1 Custom stroke length *2
CKV2
ø40 to ø100 20 to 100 In 1 mm increments
CAV2/ *1 : Refer to page 1030 for the number of installed switches and the min.
COVP/N2 stroke length.
*2 : The total length is the same as that of the next longer standard stroke length.
SSD2
C Switch model No.
C Switch model No. Lead
SSG Lead wire Voltage
Contact Display
Straight AC DC wire
V0* Reed ● ● 1-color display 2-wire
SSD
* Lead wire length
Blank 1 m (standard)
CAT
3 3 m (option)
5 5 m (option)
MDC2
D Switch quantity
D Switch quantity R 1 on rod side
MVC
H 1 on head side
D 2
SMG 3
T
MSD/ E Option
MSDG E Option
Blank Rod end female thread
N Rod end male thread
FC*
F Mounting bracket
F Mounting bracket
STK Blank Without mounting bracket
*1
LB Axial foot (made-to-order product)
CB Clevis bracket (pin and snap ring included)
SRL3
Precautions for model No. selection FA Rod side flange (made-to-order product)
FB Head side flange
SRG3 *1 : The mounting bracket is included at shipment.
*2 : “I” and “Y” cannot be selected together. G Accessory (available when rod end male thread “N” is selected)
G Accessory I Rod eye
SRM3 [Example of model No.] *2 Y Rod clevis (pin and snap ring included)

SRT3 SSD2-KG1L4-50-40-V0-D-N-LB-I
Model: Compact cylinder
MRL2 Double acting/high load/with coil scraper/with How to order switch
strong magnetic field proof switch

MRG2 B ●
A Bore size : ø50 mm SW V0
● Stroke length : 40 mm
●
C Switch model No. : Reed V0 switch,
SM‑25 Lead wire length 1 m
●
D Switch quantity : 2 pcs. included Switch model No.
ShkAbs ●
E Option : Rod end male thread (Item C above)
●
F Mounting bracket : Axial foot

FJ ●
G Accessory : Rod eye

How to order mounting bracket

FK
Bore size (mm)
ø40 ø50 ø63 ø80 ø100
Spd Mounting bracket
Contr Flange (FB) SSD2-FA-40 SSD2-FA-50 SSD2-FA-63 SSD2-FA-80 SSD2-FA-100
Clevis bracket (CB) SSD2-CB-40 SSD2-CB-50 SSD2-CB-63 SSD2-CB-80 SSD2-CB-100
Ending
*1:The foot mounting bracket is provided as 2 pcs./set.

1032
 SSD2-KG1L4 Series
Double acting/high load/with strong magnetic field proof switch/coil scraper
Internal structure and parts list SCP*3
● SSD2-KG1L4-40 to 100
CMK2

1 3 2 5 6 4 7 9 8 11 12 14 13 15 10 16
CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

No. Part name Material Remarks No. Part name Material Remarks SSG
1 Piston rod Steel Industrial chrome plating 9 Cushion rubber R Urethane rubber
2 C type snap ring for hole Steel Zinc phosphate 10 Cushion rubber H Urethane rubber SSD
3 Coil scraper Phosphor bronze 11 Spacer Aluminum alloy
4 Rod metal gasket Nitrile rubber 12 Magnet Plastic CAT
ø40, ø50: Special aluminum ø40, ø50: Alumite 13 Piston Aluminum alloy Chromate
5 Rod metal MDC2
ø63 to ø100: Aluminum alloy ø63 to ø100: Chromate 14 Piston packing Nitrile rubber
6 Rod packing Nitrile rubber 15 Wear ring Polyacetal resin
7 Bush Oiles drymet 16 Cover Aluminum alloy Alumite MVC
8 Body Aluminum alloy Hard alumite
SMG

Repair parts list MSD/

MSDG
Part name
Kit No. Repair parts No.
Bore size (mm) FC*
ø40 SSD2-KG1-40K
ø50 SSD2-KG1-50K STK
3 4 6 9
ø63 SSD2-KG1-63K
10 14 15
ø80 SSD2-KG1-80K SRL3
ø100 SSD2-KG1-100K
SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1033
 SSD2-KG1L4 Series
SCP*3 Dimensions
● SSD2-KG1L4-40 to 100 ● Rod end male thread
CMK2

CMA2 FA A + stroke length

F 10 WF B + stroke length
SCM N 5 C D
H HD
8-J
SCG Mounting hole
2-EE a’ wf

KK c’
SCA2
O

SCS2
øMM
G

øMM
CKV2
øU
FB
N
F

CAV2/
COVP/N2
kk’ Width across flats M
SSD2 M RD 8-KA Width across flats H
øK

øI
SSG

SSD
Code
A B C D EE F FA FB G H I J
CAT Bore size (mm)
ø40 71.5 59.5 12 8.5 Rc1/8 52 36 31 57 15 5.5 Spot face ø9 depth 5.5
ø50 73.5 60.5 10.5 10.5 Rc1/4 64 42 32 71 18 6.9 Spot face ø11 depth 6.5
MDC2
ø63 79 66 13 11 Rc1/4 77 48.5 32 84 23 8.7 Spot face ø14 depth 9
ø80 88.5 73.5 16 13 Rc3/8 98 59 32 104 31 10.5 Spot face ø17.5 depth 11
MVC
ø100 100 83 23 15 Rc3/8 117 68.5 32 123.5 38 10.5 Spot face ø17.5 depth 11

SMG Code
K KA KK M MM N O U WF HD RD
Bore size (mm)
MSD/ ø40 69 M6 depth 11 M8 depth 13 14 16 40 5 28 h9 12 12.5 18
MSDG
ø50 86 M8 depth 13 M10 depth 15 17 20 50 7 35 h9 13 13.5 18

FC* ø63 103 M10 depth 25 M10 depth 15 17 20 60 7 35 h9 13 18.5 18.5

ø80 132 M12 depth 28 M16 depth 21 22 25 77 6 43 h9 15 23.5 21

STK ø100 156 M12 depth 28 M20 depth 27 27 30 94 6.5 59 h9 17 29 25

*1 : The A + stroke length and B + stroke length when using a custom stroke length are the same as those when using the next longer standard
stroke length.
SRL3
*2 : For dimensions of individual accessories, refer to pages 1046 to 1049.

SRG3

SRM3 ● Rod end male thread

Code
a’ c’ H kk’ M MM T wf
SRT3 Bore size (mm)
ø40 23.5 20.5 22 M14×1.5 14 16 8 10
MRL2 ø50 28.5 26 27 M18×1.5 17 20 11 10
ø63 28.5 26 27 M18×1.5 17 20 11 10
MRG2 ø80 35.5 32.5 32 M22×1.5 22 25 13 13
ø100 35.5 32.5 41 M26×1.5 27 30 16 13
SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1034
 SSD2-KG1L4 Series
Double acting/high load/with AC magnetic field proof switch/coil scraper
Dimensions with mounting bracket SCP*3
● Clevis bracket (CB)
SSD2-KG1L4-40 to 100 -CB CMK2

CMA2
Rod end male thread
UB
SCM
A + stroke length
A + stroke length
WF B + stroke length D CB +00.2
CC a’ wf B + stroke length SCG

R
MR SCA2

E
N
SCS2
CD

CKV2
H1

AC
0

CJ + stroke length
Mounting bolt 4-G N
CJ + stroke length
E CAV2/
COVP/N2

SSD2

Code Common dimensions Female thread Male thread SSG

Bore size (mm) AC CB CC CD D E G MR N UB WF A B CJ a’ wf A B CJ
ø40 5 18.2 14 10 6 52 M6×16 10 40 36 7 103.5 59.5 93.5 23.5 5 125 59.5 91.5
SSD
ø50 6 22.2 20 14 7 64 M8×20 14 50 44 8 115.5 60.5 101.5 28.5 5 141 60.5 98.5
CAT
ø63 7 22.2 20 14 8 77 M10×25 14 60 44 8 123 66 109 28.5 5 148.5 66 106
ø80 9 28.2 27 18 10 98 M12×40 18 77 56 10 144.5 73.5 126.5 35.5 8 178 73.5 124.5
MDC2
ø100 12 32.2 31 22 13 117 M12×40 22 94 64 12 167 83 145 35.5 8 198.5 83 141

MVC

SMG
● Head side flange (FB) MSD/
SSD2-KG1L4-40 to 100 -FB MSDG

FC*

Rod end male thread

STK
FM A + stroke length
A + stroke length FL SRL3
a’ wf B + stroke length FT
WF B + stroke length FT N 4-FD
SRG3

SRM3
FH
FC

SRT3
Mounting bolt 4-G
ø32 to ø63: Hexagon socket button head bolt MRL2
ø80/ø100: Special bolt
MRG2

SM‑25

ShkAbs
Code Common dimensions Female thread Male thread
Bore size (mm) FC FD FH FL FM FT N G WF A B a’ wf A B FJ
ø40 40 5.5 54 62 72 8 40 M6×16 7 79.5 59.5 23.5 5 101 59.5
ø50 50 6.6 67 76 89 9 50 M8×20 8 82.5 60.5 28.5 5 108 60.5 FK
ø63 60 9 80 92 108 9 60 M10×25 8 88 66 28.5 5 113.5 66
ø80 77 11 99 116 134 11 77 M12×40 10 99.5 73.5 35.5 8 133 73.5
Spd
Contr
ø100 94 11 117 136 154 11 94 M12×40 12 111 83 35.5 8 142.5 83

Ending

1035
 Compact cylinder double acting/single rod

SSD2-P7*/P5* Series
SCP*3 ● Bore size: ø12/ø16/ø20/ø25/ø32/ø40/ø50/ø63/ø80/ø100/ø125/
CMK2
ø140/ø160
JIS symbol
CMA2

SCM
Specifications
SCG
SSD2-P7*/P5*
Item
SSD2-L-P7*/P5* (with switch)
SCA2 Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø140 ø160
Actuation Double acting
SCS2 Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressure MPa 0.15 (≈22 psi, 1.5 bar) 0.1 (≈15 psi, 1 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -10 (14°F) to 60 (140°F) (no freezing)
CAV2/
Port size M5 Rc1/8 *1 Rc1/4 Rc3/8
COVP/N2
Pressure relief port size M5 Rc3/8
+1.0 +2.0
Stroke tolerance mm
SSD2 0 0

Working piston speed mm/s 50 to 500 50 to 300

Cushion None Rubber cushion
SSG Lubrication Not available
Allowable absorbed energy J 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56 6.52 6.52 7.78
SSD *1: The ø32 bore size with a 5 mm stroke and without a switch has a port size of M5.

CAT Stroke length Custom stroke length

Bore size Standard stroke Max. stroke Min. stroke ● SSD2-P7*, P5* Series
MDC2 (mm) length (mm) length (mm) length (mm) Standard products
ø12 5/10/15/20 Item
30 Standard stroke length body with spacer
ø16 25/30 Model No. Refer to How to order.
MVC
ø20 5/10/15/20/25 Description
A spacer is added to the standard stroke length body to adjust the
50 stroke length in 1 mm increments.
ø25 30/35/40/45/50
SMG 1(5) Bore size Stroke range
ø32 5/10/15/20/25/30 12/16 1 to 29
Stroke range
MSD/ ø40 35/40/45/50/75/100 20 to 25 1 to 49
MSDG The value in ( )
ø50 32 to 100 1 to 99
10/15/20
100 is for types with Model No.: SSD2-32-38-P7
FC* ø63 25/30/35 Example of
one or two A +2 mm spacer is added to the SSD2-32-40-P7 standard cylinder
ø80 40/45/50 model No. to create 38 mm stroke length. B + stroke length is 73mm.
75/100 switches.
STK ø100 A + stroke length
ø125 10/20/30/40/50
B + stroke length
SRL3 ø140 75/100/125/150 300
ø160 175/200/250/300
SRG3 *1: Availability of custom stroke length
Custom stroke length is available in 1 mm increments. Total length when using a custom
stroke length is different between ø12 to ø100 and ø125 to ø160. Please be careful.
SRM3 (ø12 to ø100)  The dimensions of the total length with the custom stroke length
are the same as the next longer standard stroke length.
(ø125 to ø160)  Total length dimension with custom stroke length is handled as
SRT3 custom stroke dedicated length.
*2: Less than 5 mm with 1-color display switch and less than 10 mm with 2-color display, off-
MRL2 delay, T1* or T8* switch are not available.

MRG2 Switch specifications (F type switch)

● 1-color/2-color display
SM‑25 Proximity 2-wire Proximity 3-wire Proximity 2-wire Proximity 3-wire
Item F2YH/ F3PH/F3PV F3YH/
F2S F3S F2H/F2V F3H/F3V
ShkAbs F2YV (made to order) F3YV
Dedicated for For programmable Dedicated for For programmable
Applications
programmable controller controller, relay programmable controller controller, relay
FJ Output method - NPN output - NPN output PNP output NPN output
Power supply voltage - 10 to 28 VDC - 10 to 28 VDC 4.5 to 28 VDC 10 to 28 VDC
FK Load voltage 10 to 30 VDC 30 VDC or less 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20 mA 50 mA or less 5 to 20 mA 50 mA or less
Spd LED Yellow LED Red/green
Yellow LED
Red/green
Contr Indicator lamp
(Lit when ON)
LED
(Lit when ON) (Lit when ON) (Lit when ON)
LED
(Lit when ON)
Leakage current 1 mA or less 10 μA or less 1 mA or less 10 μA or less
Ending
Weight g 1 m:10 3 m:29

1036
 SSD2-P7*/P5* Series
Specifications
Switch specifications (T type switch) SCP*3
● 1-color/2-color display/for AC magnetic field proof
Proximity 2-wire
Proximity 2-wire Proximity 3-wire Reed 2-wire Proximity 2-wire CMK2
Item T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD(*4)
T1H/T1V T0H/T0V T5H/T5V T8H/T8V
T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT CMA2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable Dedicated for
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SCM
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC -
SCG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
SCA2
Red/green Red/green Yellow Red/green Red/green Red/green
Indicator LED LED LED LED Without indicator LED
LED LED LED LED LED LED
lamp (Lit when ON) (Lit when ON)
(Lit when ON) (Lit when ON)
(Lit when ON)
(Lit when ON) (Lit when ON) (Lit when ON)
(Lit when ON) lamp (Lit when ON)
(Lit when ON)
SCS2
Leakage ≤ 1 mA at 100 VAC, 1 mA or
1 mA or less 10 μA or less 0 mA CKV2
current ≤ 2 mA at 200 VAC less
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
Weight g 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 CAV2/
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272 COVP/N2
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
SSD2
*3 : The max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C.
(5 to 10 mA at 60°C) SSG
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
*5 : The F type switch uses a bend-resistant lead wire.
SSD
Cylinder weight table (the weight of the switches is when there are 2 cylinder switches.)
● ø12 to ø100 (Unit: g) CAT
Stroke length (mm) 5 10 15 20 25 30 35
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch MDC2
ø12 66 107 74 116 83 125 91 133 100 142 108 150 - -
ø16 92 138 103 148 113 158 124 169 135 180 146 191 - - MVC
ø20 130 185 142 217 155 230 168 243 180 255 193 268 206 281
ø25 181 272 196 287 212 303 228 319 244 335 259 350 275 366 SMG
ø32 254 368 276 390 298 412 320 434 341 455 363 477 385 499
MSD/
ø40 373 516 400 543 426 569 453 596 480 623 506 649 533 676 MSDG
ø50 - - 691 885 733 927 775 969 817 1011 860 1054 902 1096
ø63 - - 939 1218 994 1273 1049 1328 1104 1383 1159 1438 1215 1494 FC*
ø80 - - 1911 2324 1998 2411 2084 2497 2171 2584 2257 2670 2344 2757
ø100 - - 2625 3192 2739 3306 2852 3419 2966 3533 3080 3647 3194 3761 STK
Stroke length (mm) 40 45 50 75 100
SRL3
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø12 - - - - - - - - - -
SRG3
ø16 - - - - - - - - - -
ø20 219 294 232 307 245 320 - - - -
SRM3
ø25 291 382 307 398 322 413 - - - -
ø32 407 521 429 543 450 564 558 672 665 779
SRT3
ø40 559 702 586 729 612 755 745 888 877 1020
ø50 944 1138 986 1180 1028 1222 1238 1432 1448 1642
MRL2
ø63 1270 1549 1325 1604 1380 1659 1655 1934 1930 2209
ø80 2431 2844 2518 2931 2604 3017 3037 3450 3469 3882
MRG2
ø100 3307 3874 3421 3988 3535 4102 4105 4672 4675 5242
● ø125 to ø160 (Unit: kg) SM‑25
Stroke length (mm) 10 20 30 40 50 75 100
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch ShkAbs
ø125 6.12 6.22 6.39 6.49 6.65 6.75 6.92 7.02 7.18 7.28 7.90 8.25 8.51 8.61
ø140 8.50 8.61 8.80 8.91 9.11 9.22 9.41 9.52 9.72 9.83 10.54 10.94 11.24 11.35 FJ
ø160 11.86 11.98 12.24 12.36 12.62 12.74 13.00 13.12 13.38 13.50 14.39 14.90 15.28 15.40
Stroke length (mm) 125 150 175 200 250 300 FK
Bore size (mm) No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch No switch With switch
ø125 9.18 9.28 9.84 9.94 10.51 10.61 11.17 11.27 12.50 12.60 13.83 13.93
Spd
Contr
ø140 12.00 12.11 12.76 12.87 13.52 13.63 14.28 14.39 15.80 15.91 17.32 17.43
ø160 16.23 16.35 17.18 17.30 18.13 18.25 19.08 19.20 20.98 21.10 22.88 23.00
Ending
Note: Refer to Ending Pages 16 and 22 for weight of switches with 3 m and 5 m switch lead wire lengths.
1037
 SSD2-P7*/P5* Series
SCP*3
How to order Code Description
Without switch (without magnet for switch) A Model No.
CMK2 SSD2 12 5 N P7 SSD2 Double acting/single rod
With switch (built-in magnet for switch) SSD2-L Double acting/single rod/with switch

CMA2 SSD2-L 12 5 T0H R N P7 B Bore size (mm)

12 ø12
SCM A Model No. 16 ø16
20 ø20
B Bore 25 ø25
SCG
size 32 ø32
40 ø40
SCA2 50 ø50
63 ø63
SCS2 80 ø80
100 ø100
CKV2 125 ø125
140 ø140
CAV2/ 160 ø160
COVP/N2
C Stroke length (mm)
SSD2 C Stroke length
*1 Refer to the stroke length table on the following page.
SSG D Switch model No.
D Switch Display Lead wire Bore size
Lead wire Lead wire Voltage
* indicates the lead wire length. Contact
SSD Straight L-shaped ACDC 121620253240506380100125140160
*2
- F2S ● 2-wire ●●
*3
- F3S ● 1-color 3-wire ●●
CAT *4
●●
Proximity

*5 F2H* F2V* ● display 2-wire

E Switch quantity F3H* F3V* ● 3-wire ●●
MDC2
F3PH* F3PV* ● 1-color display (PNP output) 3-wire ●●
F2YH* F2YV* ● 2-wire ●●
MVC F Option 2-color display
F3YH* F3YV* ● 3-wire ●●
T0H* T0V* ●● 1-color display ●●●●●●●●●●●●●
Reed

SMG G Clean-room T5H* T5V* ●● Without indicator lamp 2-wire ● ● ● ● ● ● ● ● ● ● ● ● ●

specifications T8H* T8V* ●● 1-color display ●●●●●●●●
MSD/ *6 T1H* T1V* ● ●●●●●●●●●●●
MSDG 1-color 2-wire
T2H* T2V* ● ●●●●●●●●●●●●●
display
FC* T3H* T3V* ● ●●●●●●●●●●●●●
3-wire
Precautions for model No. selection T3PH* T3PV* ● 1-color display (PNP output) (custom) ●●●●●●●●●●●●●
●●●●●●●●●●●●●
Proximity

T2WH* T2WV* ●
STK *1 : Availability of custom stroke length 2-wire
Custom stroke length is available in 1 mm increments. (Less than 5 mm T2YH* T2YV* ● 2-color ●●●●●●●●●●●
with switch is not available.) Total length when using a custom stroke length T3WH* T3WV* ● display ●●●●●●●●●●●●●
SRL3 is different between ø12 to ø100 and ø125 to ø160. Please be careful. T3YH* T3YV* ●
3-wire
●●●●●●●●●●●
[ø12 to ø100]
T2YD* - ● 2-color display ●●●●●●●●●●●
The dimensions of the total length with the custom stroke length are the 2-wire
SRG3 T2YDT* - ● AC magnetic field ●●●●●●●●●●●
same as the next longer standard stroke length.
[ø125 to ø160] T2JH* T2JV* ● 1-color display off-delay 2-wire ●●●●●●●●●●●
SRM3 Dedicated custom stroke length. * Lead wire length
*2 : The T2YD* switch cannot be mounted on the ø12 and ø16 bore sizes.
*3 : The T8* switch cannot be mounted on the ø12 to ø32 bore sizes.
Blank 1 m (standard)
SRT3 *4 : The F type switch can only be mounted on the piping port surface of bore 3 3 m (option)
sizes ø20 and ø25. 5 5 m (option)*8
MRL2 *5 : The F type switch with L type lead wire on ø20 models
cannot be selected on stroke lengths of 15 mm or under.
E Switch quantity
*6 : “P5” and “P51” are made-to-order products. R 1 on rod side
MRG2 *7 : Refer to pages 750 and 751 for combinations of variations/ H 1 on head side
options. D 2
*8 : F type switch cannot be selected.
SM‑25 F Option
[Example of model No.] Blank Rod end female thread
ShkAbs N Rod end male thread
SSD2-L-12-5-T0H-R-NP7
Clean-room specifications
●
G
FJ A Model : Compact cylinder, standard
●
B Bore size : ø12 mm Structure Material limitations

FK ●
C Stroke length : 5 mm P7 Exhaust port -
●
D Switch model No. : Reed switch T0H, lead wire length 1 m P71 Vacuum treatment -
Spd ●
E Switch quantity : 1 on rod side P5 Exhaust port Copper/silicon/halogen-based materials (fluorine, chlorine, bromine) prohibited (custom)
Contr ●
F Option : Rod end male thread P51 Vacuum treatment Copper/silicon/halogen-based materials (fluorine, chlorine, bromine) prohibited (custom)
●
G Clean-room specifications : Exhaust port

Ending

1038
 SSD2-P7*/P5* Series
How to order
[Stroke length table] SCP*3
Applicable bore size
Stroke length (mm)
ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø140 ø160 CMK2
5 ● ● ● ● ● ●
10 ● ● ● ● ● ● ● ● ● ● ● ● ● CMA2
15 ● ● ● ● ● ● ● ● ● ●
20 ● ● ● ● ● ● ● ● ● ● ● ● ● SCM
25 ● ● ● ● ● ● ● ● ● ●
30 ● ● ● ● ● ● ● ● ● ● ● ● ● SCG
Standard stroke length

35 ● ● ● ● ● ● ● ●
40 ● ● ● ● ● ● ● ● ● ● ●
SCA2
45 ● ● ● ● ● ● ● ●
SCS2
50 ● ● ● ● ● ● ● ● ● ● ●
75 ● ● ● ● ● ● ● ● ●
CKV2
100 ● ● ● ● ● ● ● ● ●
125 ● ● ● CAV2/
COVP/N2
150 ● ● ●
175 ● ● ● SSD2
200 ● ● ●
250 ● ● ● SSG
300 ● ● ●
Min. stroke length (mm) 1 SSD
Max. stroke length (mm) 30 50 100 300
Custom stroke length *1 In 1 mm increments
CAT

MDC2

MVC
Theoretical thrust table (Unit: N)
SMG
Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MSD/
Push - 17.0 22.6 33.9 45.2 56.5 67.9 79.2 90.5 1.02 × 102 1.13 × 102 MSDG
ø12
Pull - 12.7 17.0 25.4 33.9 42.4 50.9 59.4 67.9 76.3 84.8
Push - 30.2 40.2 60.3 80.4 1.01 × 102 1.21 × 102 1.41 × 102 1.61 × 102 1.81 × 102 2.01 × 102 FC*
ø16
Pull - 22.6 30.2 45.2 60.3 75.4 90.5 1.06 × 102 1.21 × 102 1.36 × 102 1.51 × 102
Push - 47.1 62.8 94.2 1.26 × 102 1.57 × 102 1.88 × 102 2.20 × 102 2.51 × 102 2.83 × 102 3.14 × 102 STK
ø20
Pull - 35.3 47.1 70.7 94.2 1.18 × 102 1.41 × 102 1.65 × 102 1.88 × 102 2.12 × 102 2.36 × 102
Push - 73.6 98.2 1.47 × 102 1.96 × 102 2.45 × 102 2.95 × 102 3.44 × 102 3.93 × 102 4.42 × 102 4.91 × 102 SRL3
ø25
Pull - 56.7 75.6 1.13 × 102 1.51 × 102 1.89 × 102 2.27 × 102 2.64 × 102 3.02 × 102 3.40 × 102 3.78 × 102
Push - 1.21 × 102 1.61 × 102 2.41 × 102 3.22 × 102 4.02 × 102 4.83 × 102 5.63 × 102 6.43 × 102 7.24 × 102 8.04 × 102 SRG3
ø32
Pull - 90.5 1.21 × 102 1.81 × 102 2.41 × 102 3.02 × 102 3.62 × 102 4.22 × 102 4.83 × 102 5.43 × 102 6.03 × 102
Push - 1.88 × 102 2.51 × 102 3.77 × 102 5.03 × 102 6.28 × 102 7.54 × 102 8.80 × 102 1.01 × 103 1.13 × 103 1.26 × 103 SRM3
ø40
Pull - 1.58 × 102 2.11 × 102 3.17 × 102 4.22 × 102 5.28 × 102 6.33 × 102 7.39 × 102 8.44 × 102 9.50 × 102 1.06 × 103
Push - 2.95 × 102 3.93 × 102 5.89 × 102 7.85 × 102 9.82 × 102 1.18 × 103 1.37 × 103 1.57 × 103 1.77 × 103 1.96 × 103
ø50 SRT3
Pull - 2.47 × 102 3.30 × 102 4.95 × 102 6.60 × 102 8.25 × 102 9.90 × 102 1.15 × 103 1.32 × 103 1.48 × 103 1.65 × 103
Push 3.12 × 102 4.68 × 102 6.23 × 102 9.35 × 102 1.25 × 103 1.56 × 103 1.87 × 103 2.18 × 103 2.49 × 103 2.81 × 103 3.12 × 103
ø63
Pull 2.80 × 102 4.20 × 102 5.61 × 102 8.41 × 102 1.12 × 103 1.40 × 103 1.68 × 103 1.96 × 103 2.24 × 103 2.52 × 103 2.80 × 103
MRL2
Push 5.03 × 102 7.54 × 102 1.01 × 103 1.51 × 103 2.01 × 103 2.51 × 103 3.02 × 103 3.52 × 103 4.02 × 103 4.52 × 103 5.03 × 103
ø80 MRG2
Pull 4.54 × 102 6.80 × 102 9.07 × 102 1.36 × 103 1.81 × 103 2.27 × 103 2.72 × 103 3.17 × 103 3.63 × 103 4.08 × 103 4.54 × 103
Push 7.85 × 102 1.18 × 103 1.57 × 103 2.36 × 103 3.14 × 103 3.93 × 103 4.71 × 103 5.50 × 103 6.28 × 103 7.07 × 103 7.85 × 103
ø100
Pull 7.15 × 102 1.07 × 103 1.43 × 103 2.14 × 103 2.86 × 103 3.57 × 103 4.29 × 103 5.00 × 103 5.72 × 103 6.43 × 103 7.15 × 103 SM‑25
Push 1.23 × 103 1.84 × 103 2.45 × 103 3.68 × 103 4.91 × 103 6.14 × 103 7.36 × 103 8.59 × 103 9.82 × 103 1.10 × 104 1.23 × 104
ø125
Pull 1.13 × 103 1.70 × 103 2.26 × 103 3.39 × 103 4.52 × 103 5.65 × 103 6.79 × 103 7.92 × 103 9.05 × 103 1.02 × 104 1.13 × 104 ShkAbs
Push 1.54 × 103 2.31 × 103 3.08 × 103 4.62 × 103 6.16 × 103 7.70 × 103 9.24 × 103 1.08 × 104 1.23 × 104 1.39 × 104 1.54 × 104
ø140
Pull 1.44 × 103 2.16 × 103 2.89 × 103 4.33 × 103 5.77 × 103 7.22 × 103 8.66 × 103 1.01 × 104 1.15 × 104 1.30 × 104 1.44 × 104 FJ
Push 2.01 × 103 3.02 × 103 4.02 × 103 6.03 × 103 8.04 × 103 1.01 × 104 1.21 × 104 1.41 × 104 1.61 × 104 1.81 × 104 2.01 × 104
ø160
Pull 1.88 × 103 2.83 × 103 3.77 × 103 5.65 × 103 7.54 × 103 9.42 × 103 1.13 × 104 1.32 × 104 1.51 × 104 1.70 × 104 1.88 × 104 FK
Spd
Contr

Ending

1039
 SSD2-P7*/P5* Series
SCP*3
Dimensions
● SSD2-L-12 to 25-P7*/P5* (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
CMK2 2-EE

LB
ø12/ø16 a’ wf
c’
CMA2 5 mm stroke length
T

øMM
SCM M5

LA
(Pressure relief port)

SCG A + stroke length

B + stroke length
SCA2 F D kk’
Q
Width across
8-J WF
N flats M
SCS2 Mounting hole C Width across flats H
KK

CKV2 HD

CAV2/
N
F

COVP/N2
FB

øMM

SSD2 M
øK
øI

RD 8-KA
FA
SSG *3

● SSD2-12 to 25-P7*/P5* (without switch)

SSD ø20/ø25 A + stroke length
WF B + stroke length
F
CAT 8-J M5 Q D
Mounting hole (Pressure relief port)
N C
MDC2 KK

MVC
N
F

SMG
øMM

MSD/
MSDG øK M 8-KA
øI

FC*
Code Without switch Common dimensions with switch
LA LB
STK A *1 B *1 A B C D Q *4 EE F FA *3 FB I J K KA KK
Bore size (mm) ≤5 St Over 5 st ≤5 St Over 5 st
ø12 30.5 27 35.5 32 5.5 5.5 4 0 2 0 16.5(16) M5 25 13(16.5) 4.5 3.5 6.5 spot face depth 3.5 32 M4 depth 7 M3 depth 6
SRL3 ø16 30.5 27 35.5 32 5.5 5.5 6 0 0 0 16.5 M5 29 15(18.5) 4.5 3.5 6.5 spot face depth 3.5 38 M4 depth 7 M4 depth 8
ø20 34 29.5 44 39.5 5.5 7 - - - - 16.5 M5 36 18.5(22) 12.5 5.5 9 spot face depth 5.5 47 M6 depth 11 M5 depth 7
SRG3 ø25 37.5 32.5 47.5 42.5 7 8.5 - - - - 18 M5 40 20.5(24) 13.5 5.5 9 spot face depth 5.5 51 M6 depth 11 M6 depth 12
Reed T0H/T0V, Proximity T2WH/T2WV, Proximity F2H/F2V, F3H/F3V,
Code Common dimensions with switch T5H/T5V Proximity T2H/T2V, T3H/T3V T3WH/T3WV F2YH/F2YV, F3YH/F3YV Proximity F2S/F3S
SRM3
Bore size (mm) M MM N WF HD RD HD RD HD RD HD RD HD RD
ø12 5 6 15.5 3.5 4 9 4 9 6 11 - - - -
SRT3
ø16 6 8 20 3.5 2 11.5 2 11.5 3 13.5 - - - -
ø20 8 10 25.5 4.5 6 14.5 6 14.5 8 16.5 10.5 19 9.5 18
MRL2
ø25 10 12 28 5 8 16 8 16 10 18 12.5 20 11.5 19
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke length, apply the next Code Proximity T2YH/T2YV
Reed T8H/T8V AC magnetic field proof
MRG2 longer standard stroke length (instead of the custom stroke length) to the stroke length value.
T3YH/T3YV/T2JH/T2JV T2YD/T2YDT/T1H/T1V

(Example) If the custom stroke length is 7 mm, apply the standard stroke length of 10 mm. Bore size (mm) HD RD HD RD HD RD
*2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions ø12 - - - - - -
SM‑25
according to the setting. ø16 - - - - - -
*3 : Dimensions in ( ) of FA are for the radial lead wire.
ø20 5 13.5 - - - -
ShkAbs *4 : Dimensions in ( ) of code Q are when the value is for a 5 mm stroke without
switch. ø25 6.5 15 - - - -
*5 : Only F type switch is available for the ø20 or ø25 piping port surface.
FJ
● Rod end male thread
Code
FK a’ c’ H kk’ M MM T wf
Bore size (mm)
Spd ø12 10.5 9 8 M5 5 6 3.2 3.5
Contr ø16 12 10 10 M6 6 8 3.6 3.5
ø20 14 12 13 M8 8 10 5 4.5
Ending ø25 17.5 15 17 M10×1.25 10 12 6 5

1040
 SSD2-P7*/P5* Series
Dimensions
Dimensions SCP*3
● SSD2-L-32 to 100-P7*/P5* (with switch/TOH/V, T5H/V, T2H/V, T3H/V) ● Rod end male thread
A + stroke length a’ wf CMK2
c’
F WF B + stroke length
T
8-J N Q D CMA2

øMM
Mounting hole H C
M5 2-EE
SCM
0

(Pressure relief port)

KK
HD
SCG
kk’
RD

øMM
FB Width across
N
SCA2
G

N
F

flats M
Width across flats H
SCS2
FA 8-KA

øI
M *3 CKV2
øK

● SSD2-32 to 100-P7*/P5* (without switch) A + stroke length CAV2/

F WF B + stroke length COVP/N2
8-J N Q D
Mounting hole
H C 2-EE
SSD2
M5
0

(Pressure relief port)

KK SSG

SSD
øMM
G

N
F

CAT

MDC2
8-KA
øI

øK M
MVC
Code Without switch Common dimensions with switch
Bore size (mm) A *1, *4 B *1, *4 A *1 B *1 C D *6 Q EE F FA *3 FB G H I J K
*5 9 spot face
SMG
ø32 40(50) 33(43) 50 43 7 8(5.5) 20 Rc1/8 45 23(26.5) 20.5 49.5 12.5 5.5 depth 5.5 60
9 spot face
ø40 46.5(56.5) 39.5(49.5) 56.5 49.5 8.5 8 21.5 Rc1/8 52 26.5(30) 27.5 57 15 5.5 depth 5.5 69 MSD/
ø50 48.5(58.5) 40.5(50.5) 58.5 50.5 9.5 10.5(9.5) 25 Rc1/4 *5 64 32.5(36) 28.5 71 18 6.9 11 spot face
depth 6.5 86 MSDG
14 spot face
ø63 54(64) 46(56) 64 56 10 11 25.5 Rc1/4 77 39(42.5) 28.5 84 23 8.7 depth 9 103
ø80 68.5(78.5) 58.5(68.5) 78.5 68.5 11.5 13 30 Rc3/8 98 49.5(53) 28.5 104 31 10.5 17.5 spot face
132
FC*
depth 11
17.5 spot face
ø100 80(90) 68(78) 90 78 15.5 15 35 Rc3/8 117 59(62.5) 28.5 123.5 38 10.5 depth 11 156
Reed T0H/T0V, Proximity T2H/T2V, Proximity T2WH/ STK
Code Common dimensions with switch T5H/T5V T3H/T3V T2WV, T3WH/T3WV

Bore size (mm) KA KK M MM N O WF HD RD HD RD HD RD

SRL3
ø32 M6 depth 11 M8 depth 13 14 16 34 4.5 7 4 19.5 4 19.5 6 21.5
ø40 M6 depth 11 M8 depth 13 14 16 40 5 7 7 22 7 22 8.5 23.5
SRG3
ø50 M8 depth 13 M10 depth 15 17 20 50 7 8 7.5 22.5 7.5 22.5 9 24
ø63 M10 depth 25 M10 depth 15 17 20 60 7 8 12.5 23 12.5 23 14 24.5
ø80 M12 depth 28 M16 depth 21 22 25 77 6 10 17.5 25.5 17.5 25.5 19 27
SRM3
ø100 M12 depth 28 M20 depth 27 27 30 94 6.5 12 23 29.5 23 29.5 24.5 31
Code Proximity T2YH/T2YV
Reed T8H/T8V AC magnetic field proof
*1 : To calculate A+ stroke length or B+ stroke length when using custom stroke
SRT3
T3YH, T3YV/T2JH/T2JV T2YD, T2YDT/T1H/T1V
length, apply the next longer standard stroke length (instead of the custom
Bore size (mm) HD RD HD RD HD RD stroke length) to the stroke length value. (Example) If the custom stroke length MRL2
ø32 3.5 18.5 - - 3.5 18.5 is 7 mm, apply the standard stroke length of 10 mm.
ø40 5.5 20.5 1 16 5.5 20.5 *2 : HD and RD dimensions for 5 mm stroke length differ from these dimensions
ø50 6 21 1.5 16.5 6 21 according to the setting. MRG2
*3 : Dimensions in ( ) of FA are for the radial lead wire.
ø63 11 21.5 6.5 17 11 21.5 *4 : Dimensions in ( ) of codes A and B are for stroke lengths of more than 50 mm.
ø80 16 24 11.5 19.5 16 24 *5 : The ø32 bore size with a 5 mm stroke and without a switch has a port size of
SM‑25
ø100 21.5 28 17 23.5 21.5 28 M5. The ø50 bore size with a 10 mm stroke and without a switch has a port
size of Rc1/8. ShkAbs
● Rod end male thread *6 : Dimensions in ( ) of codes C and D are when the value is for a 5 mm stroke
without switch.
Code FJ
a′ c′ H kk′ M MM T wf
Bore size (mm)
ø32 23.5 20.5 22 M14×1.5 14 16 8 5 FK
ø40 23.5 20.5 22 M14×1.5 14 16 8 5
ø50 28.5 26 27 M18×1.5 17 20 11 5 Spd
ø63 28.5 26 27 M18×1.5 17 20 11 5
Contr
ø80 35.5 32.5 32 M22×1.5 22 25 13 8
Ending
ø100 35.5 32.5 41 M26×1.5 27 30 16 8

1041
 SSD2-P7*/P5* Series
SCP*3
Dimensions (ø125 to ø160)
● SSD2-L-125 to 160-P7*/P5* (with switch) C
Q D ● Rod end male thread
CMK2 2-EE
a’ wf
c’
CMA2 T

øMM
SCM

SCG
EE
(Pressure relief port) kk’
SCA2
F Width across
N A + stroke length flats M
SCS2 L WF B + stroke length Width across flats H
b a a a b
CKV2
CAV2/ KK
COVP/N2
HD
øMM
N
F

FB

SSD2 RD

SSG

SSD FA 8-J
øK

8-KA
øI

M Mounting hole

CAT
● SSD2-125 to 160-P7*/P5* (without switch) Q
D
C
MDC2
2-EE

MVC

SMG
MSD/
MSDG EE
(Pressure relief port)
FC* F
A + stroke length
N
L WF B + stroke length
STK a a b
b a

SRL3
KK

SRG3
øMM
N
F

SRM3

SRT3 8-J 8-KA

øK M Mounting hole
øI

MRL2
Code Common dimensions for types with/without switch
Bore size (mm) A B C D EE F FA *2 FB I J K KA KK L M MM N Q WF
MRG2 ø125 118 102 23.5 23.5 Rc3/8 142 71.5(75) 44.5 12.5 20 spot face depth 13 190 M14 depth 25 M22 depth 30 72 30 35 114 53.5 16
ø140 128 112 27 27 Rc3/8 158 79.5(83) 44.5 12.5 20 spot face depth 13 210 M14 depth 25 M22 depth 30 80 30 35 128 57 16
SM‑25 ø160 143 126 30 30 Rc3/8 178 89.5(93) 48.5 14.7 23 spot face depth 15.2 238 M16 depth 28 M24 depth 33 90 36 40 144 65 17
Code Reed T0H/T0V, T5H/T5V Proximity T2H/T2V, T3H/T3V Proximity T2YH/T2YV, T3YH/T3YV
Bore size (mm) HD RD HD RD HD RD
ShkAbs ø125 24.5 59.5 24.5 59.5 23 58
ø140 31 63 31 63 29.5 61.5
FJ ø160 34 74 34 74 32.5 72.5
● *1 : Refer to page 1044 for HD , RD, and protruding dimensions of the 2-color display switches.
● *2 : Dimensions in ( ) of FA are for the radial lead wire.
FK
Dimensions of rod end male thread
Spd Code
a’ c’ H kk’ M MM T wf
Contr Bore size (mm)
ø125 45 42 46 M30×1.5 30 35 18 13
Ending ø140 45 42 46 M30×1.5 30 35 18 13
ø160 50 47 55 M36×1.5 36 40 21 14

1042
MEMO
SCP*3

CMK2

CMA2

SCM

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1043
 SSD2 Series
SCP*3
SSD2 Series common dimensions (with 2-color display, off-delay, AC magnetic field, T1* and T8* switches)
● SSD2-L-12 to 100 (with 2-color display, off-delay, T8* switches/T2YH/V, T3YH/V, T2JH/V, T8H/V)
CMK2

CMA2 · ø12/ø16 · ø20/ø25 · ø32 to ø100

SCM A + stroke length 

FA
B + stroke length  FA
SCG FA
HD
HD HD
SCA2

FB

FB
FB

SCS2
RD RD
RD
CKV2
CAV2/ T2YH/V, T3YH/V, T2JH/V T8H/V
COVP/N2 Code SSD2-L, *1 *2 SSD2- SSD2- SSD2-L, *1 *2
FA FB SSD2-DL SSD2 (Long) -L SSD2-GL SSD2-DL SSD2-ML SSD2 (Long) -L SSD2-G5L
XL,YL ML G5L XL,YL, GL
SSD2
Bore size (mm) RD HD RD HD RD HD RD HD RD HD RD HD RD HD RD HD RD HD RD HD RD HD
ø12 18.8 8 - - 1 3.5 3 1 - - - - - - - - - - - - - - - -
SSG
ø16 20.8 8 - - 0.5 3.5 2.5 1.5 - - - - - - - - - - - - - - - -
ø20 24.3 16 6.5 2 5 8 14(8.5) 5.5(11) 10 1.5 16.5 2 - - - - 0.5 3.5 - - 9.5(4) 0(6.5) - -
SSD
ø25 26.3 17 8.5 3 8 10 17.5(10.5) 5(12.5) 13 1.5 18.5 3 - - - - 1.5 5.5 - - 13(6) 0(8) - -
ø32 28.8 24 8.5 3.5 7.5 9.5 16(8) 8(14.5) 17.5 2 18.5 3.5 19.5 3.5 - - 3 5 - - 11.5(4) 2.5(10) - -
CAT
ø40 32.3 31 10.5 5.5 10.5 15 24.5(15) 8(17.5) 10.5 5.5 10.5 5.5 20.5 5.5 6 1 6 10.5 6 1 20(10.5) 3.5(13) 16 1
ø50 38.3 32 11 6 11 15 24.5(16) 8.5(17.5) 11 6 11 6 21 6 6.5 1.5 6.5 10.5 6.5 1.5 19.5(11) 4(13) 16.5 1.5
MDC2
ø63 44.8 32 11.5 11 11.5 16.5 18.5(13.5) 16(21.5) 11.5 11 11.5 11 21.5 11 7 6.5 7 12 7 6.5 13.5(8.5) 11.5(17) 17 6.5
ø80 55.3 32 14 16 14 21.5 22.5(17.5) 20.5(26.5) - - 14 16 28 16 9.5 11.5 9.5 17 - - 17.5(12.5) 16(22) 23.5 11.5
MVC
ø100 64.8 32 18 21.5 18 27 26.5(21.5) 26.5(32) - - 18 21.5 33.5 21.5 13.5 17 13.5 22.5 - - 21.5(16.5) 22(27.5) 29 17

SMG
MSD/ ● SSD2-L-12 to 100 (for AC magnetic field, with T1* switch, T2YD, T2YDT, T1H/V)
MSDG

FC*
· ø12/ø16 · ø20/ø25 · ø32 to ø100

STK

A + stroke length 
SRL3 FA
B + stroke length  FA
FA
SRG3 HD HD
HD
FB

FB
FB

SRM3

SRT3 RD RD
RD

MRL2

MRG2 Code SSD2-L, XL,YL SSD2-DL *1 SSD2 (Long stroke) -L *2 SSD2-ML SSD2-GL SSD2-G5L
FA FB
Bore size (mm) RD HD RD HD RD HD RD HD RD HD RD HD
SM‑25 ø12 23.8 8 - - 1.5 4 3 1 - - - - - -
ø16 25.8 8 - - 0.5 3.5 2.5 1.5 - - - - - -
ShkAbs ø20 29.3 16 6.5 2 5 8 14(8.5) 5.5(11) 10 1.5 16.5 2 - -
ø25 31.3 17 8.5 3 8 10 17.5(10.5) 5(12.5) 13 1.5 18.5 3 - -
FJ ø32 33.8 24 8.5 3.5 7.5 9.5 16(8) 8(14.5) 17.5 2 18.5 3.5 19.5 3.5
ø40 37.3 31 10.5 5.5 10.5 15 24.5(15) 8(17.5) 10.5 5.5 10.5 5.5 20.5 5.5
FK ø50 43.3 32 11 6 11 15 24.5(16) 8.5(17.5) 11 6 11 6 21 6
ø63 49.8 32 11.5 11 11.5 16.5 18.5(13.5) 16(21.5) 11.5 11 11.5 11 21.5 11
Spd ø80 60.3 32 14 16 14 21.5 22.5(17.5) 20.5(26.5) - - 14 16 28 16
Contr
ø100 69.8 32 18 21.5 18 27 26.5(21.5) 26.5(32) - - 18 21.5 33.5 21.5

Ending *1: The port surface with the mark is the “RD side”.
*2: Dimensions in ( ) are for stroke length over 100 for ø20, stroke length over 150 for ø25 to ø50, and stroke length over 200 for ø63 to ø100.

1044
 SSD2-K Series
SSD2 Series common switch dimensions
SSD2-K Series common dimensions (with 2-color display, off-delay, AC magnetic field, T1* and T8* switches) SCP*3
● SSD2-KL-20 to 100 (with 2-color display, off-delay, T8* switches/T2YH/V, T3YH/V, T2JH/V, T8H/V)
CMK2

· ø20/ø25 · ø32 to ø100 CMA2

SCM
FA FA
SCG

HD
HD
SCA2
FB

SCS2

FB
CKV2
RD

RD
CAV2/
COVP/N2

SSD2
Code T2YH/V, T3YH/V, T2JH/V T8H/V
FA FB
Bore size (mm) RD HD RD HD SSG
ø20 24.3 16 8 5.5 - -
ø25 26.3 17 11.5 5 - -
SSD
ø32 28.8 24 14 8 - -
ø40 32.3 31 18 8 13.5 3.5
CAT
ø50 38.3 32 18.5 8.5 14 4
ø63 44.8 32 16.5 16 12 11.5 MDC2
ø80 55.3 32 19 20.5 14.5 16
ø100 64.8 32 23 26.5 18.5 22 MVC

SMG
● SSD2-KL-20 to 100 (for AC magnetic field, with T1* switch, T2YD, T2YDT, T1H/V)
MSD/
MSDG
· ø20/ø25 · ø32 to ø100
FC*

STK
FA FA

SRL3
HD
HD
SRG3
FB

FB

SRM3

RD SRT3
RD
MRL2

MRG2
Code
FA FB RD HD
Bore size (mm)
SM‑25
ø20 29.3 16 8 5.5
ø25 31.3 17 11.5 5
ShkAbs
ø32 33.8 24 14 8
ø40 37.3 31 18 8
FJ
ø50 43.3 32 18.5 8.5
ø63 49.8 32 16.5 16
FK
ø80 60.3 32 19 20.5
ø100 60.8 32 23 26.5 Spd
Contr

Ending

1045
 SSD2 Series
SCP*3
Dimensions (Mounting bracket: LB)
● Axial foot (LB) Material: S
 teel
CMK2 · ø12 to ø25 · ø32 to ø100 Zinc
chromate
CMA2 treatment

WF *1
SCM N 4-AC WF *1

D N
SCG

AG
N
AG

AH
AT

SCA2

AT
AH

AD
AE
Low head hexagon
Low head hexagon
socket bolt 4-B AU
TR TR socket bolt 2-B
2-øAB 2-AC AU
SCS2 AK
TS TS 2-øAB AK
a' wf *1
CKV2 a' wf *1

CAV2/
COVP/N2

SSD2

SSG

SSD *1: Hex socket mounting bolts are included.

Model No. Bore size AB AC AD AE AG AH AK AT AU B D N TR TS WF wf a’ Weight (g)
CAT SSD2-LB-12 ø12 5 4.5 - - 29.5 17 12.5 2 8 M4×10 8 15.5 34 44 13.5 13.5 10.5 51
SSD2-LB-16 ø16 5 4.5 - - 33.5 19 13 2 8 M4×10 10 20 38 48 13.5 13.5 12 61
MDC2
SSD2-LB-20 ø20 7 6.5 - - 42 24 15 3.2 9.2 M6×16 12 25.5 48 62 14.5 14.5 14 161
SSD2-LB-25 ø25 7 6.5 - - 46 26 16.5 3.2 10.7 M6×16 14 28 52 66 15 15 17.5 176
MVC
SSD2-LB-32 ø32 7 7 18.5 13 57 30 17 3.2 11.2 M6×16 - 34 57 71 17 15 23.5 107
SSD2-LB-40 ø40 7 7 18 13 64 33 18.2 3.2 11.2 M6×16 - 40 64 78 17 15 23.5 121
SMG
SSD2-LB-50 ø50 9 9 22 14 78 39 22.7 3.2 14.7 M8×20 - 50 79 95 18 15 28.5 201
MSD/ SSD2-LB-63 ø63 11 11 26 16 91.5 46 25.2 3.2 16.2 M10×25 - 60 95 113 18 15 28.5 314
MSDG SSD2-LB-80 ø80 13 13 31.5 20.5 114 59 30.5 4.5 19.5 M12×40 - 77 118 140 20 18 35.5 678
SSD2-LB-100 ø100 13 13 35 24 136 71 35.5 6 23 M12×40 - 94 137 162 22 18 35.5 1198
FC*
*1: The WF/wf dimension of the cylinder for LB is set 10 mm longer than that of standard products. Contact CKD for the cylinder model No. when ordering
individual cylinders and LB brackets.
STK *2: The mounting brackets for SSD2 are the same dimensions as the compact mounting brackets for SSD.
Check the General Catalog (CB-029SA) in order to avoid mistakes.
(Example: SSD2-LB-32 is the same dimensions as SSD-LB2-32.)
SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

1046
 SSD2 Series
Accessory dimensions
Dimensions (Mounting bracket: FA, FB) SCP*3
● Rod side flange (FA) Material: S
 teel
· ø12 to ø25 · ø32 to ø100 Zinc CMK2
FM chromate
FL treatment
FM WF Note CMA2
N 4-FD
FL
WF Note
N SCM
2-FD

SCG

FH
FC
FH
N

FT SCA2
4-AB D 4-A 4-A FT
a' wf Note
4-AB D
a' wf Note SCS2

CKV2
CAV2/
COVP/N2

FT SSD2
FT
*1: Mounting bolts are included.
SSG
Model No. Bore size FC FD FH FL FM FT A AB D N WF wf a’ Weight (g)
SSD2-FA-12 ø12 - 4.5 25 45 55 5.5 4.5 8.5 spot face depth 2.7 8 15.5 13.5 13.5 10.5 54
SSD2-FA-16 ø16 - 4.5 30 45 55 5.5 4.5 8.5 spot face depth 2.7 10 20 13.5 13.5 12 64
SSD
SSD2-FA-20 ø20 - 6.6 39 48 60 8 6.5 11.5 spot face depth 3.8 12 25.5 14.5 14.5 14 129
SSD2-FA-25 ø25 - 6.6 42 52 64 8 6.5 11.5 spot face depth 3.8 14 28 15 15 17.5 148 CAT
SSD2-FA-32 ø32 34 5.5 48 56 65 8 6.5 11.5 spot face depth 3.8 22 34 17 15 23.5 167
SSD2-FA-40 ø40 40 5.5 54 62 72 8 6.5 11.5 spot face depth 3.8 28 40 17 15 23.5 215 MDC2
SSD2-FA-50 ø50 50 6.6 67 76 89 9 9 15 spot face depth 5 35 50 18 15 28.5 387
SSD2-FA-63 ø63 60 9 80 92 108 9 11 18 spot face depth 6 35 60 18 15 28.5 573 MVC
SSD2-FA-80 ø80 77 11 99 116 134 11 13 19 spot face depth 7.5 43 77 20 18 35.5 1132
SSD2-FA-100 ø100 94 11 117 136 154 11 13 19 spot face depth 7.5 59 94 22 18 35.5 1522
SMG
Note: The WF/wf dimension of the cylinder for FA is set 10 mm longer than that of standard products. Contact CKD for the cylinder model No. when ordering
individual cylinders and FA brackets. MSD/
MSDG
● Head side flange (FB) Material: Steel, Zinc chromate treatment
· ø12 to ø25 · ø32 to ø100 FM FC*
FL
N 2-FD STK
FM
FL
N SRL3
2-FD
FH
FC

SRG3
FH
N

4-A SRM3
4-A FT 4-AB D
FT D
4-AB
SRT3

MRL2

MRG2
FT
FT SM‑25
*1: Mounting bolts are included.
Model No. Bore size FC FD FH FL FM FT A AB D N Weight (g)
ShkAbs
SSD2-FB-12 ø12 - 4.5 25 45 55 5.5 4.5 8.5 spot face depth 2.7 8 15.5 54
SSD2-FB-16 ø16 - 4.5 30 45 55 5.5 4.5 8.5 spot face depth 2.7 10 20 64
SSD2-FB-20 ø20 - 6.6 39 48 60 8 6.5 11.5 spot face depth 3.8 12 25.5 129
FJ
SSD2-FB-25 ø25 - 6.6 42 52 64 8 6.5 11.5 spot face depth 3.8 14 28 148
SSD2-FB-32 ø32 34 5.5 48 56 65 8 6.5 11.5 spot face depth 3.8 22 34 167 FK
SSD2-FB-40 ø40 40 5.5 54 62 72 8 6.5 11.5 spot face depth 3.8 28 40 215
SSD2-FB-50 ø50 50 6.6 67 76 89 9 9 15 spot face depth 5 35 50 387
Spd
Contr
SSD2-FB-63 ø63 60 9 80 92 108 9 11 18 spot face depth 6 35 60 573
SSD2-FB-80 ø80 77 11 99 116 134 11 13 19 spot face depth 7.5 43 77 1132
Ending
SSD2-FB-100 ø100 94 11 117 136 154 11 13 19 spot face depth 7.5 59 94 1522

1047
 SSD2 Series
SCP*3
Dimensions (Mounting bracket: CB)
● Clevis bracket (CB) Material: C
 ast iron
CMK2 · ø12 to ø25 · ø32 to ø100 Painting

CMA2 F UB -0.1
-0.3 C UB -0.1
-0.3

CB
D D
CB+00.2 CC
SCM CC

H R
M
SCG R
CA

SD
E

SD
SCA2

E
CD
SCS2
CD

SD

H1
0
C 4-A B e
4-A ot fac
H

AC
10

E
Sp
CKV2 Mounting bolt 4-G Mounting bolt 4-G
SD 4-A
E
CAV2/
COVP/N2 *1: Hex socket mounting bolts, pins, and snap rings are included.

SSD2 Model No. Bore size A AB AC C CA CB CC CD D E F G H MR SD UB Weight (g)

SSD2-CB-12 ø12 4.5 - - 14 12 5.2 +00.2 7 5 4 25 20 M4×12 C1.5 - 15.5 10 28
+0.3
SSD2-CB-16 ø16 4.5 - - 15 15 6.6 8 5 5 29 21 M4×12 C2 - 20 12 43
SSG 0

SSD2-CB-20 ø20 6.5 - - 18 20 8.2 +00.2 12 8 5 36 27 M6×16 C4 - 25.5 16 84

SSD2-CB-25 ø25 6.5 - - 20 24 10.2 +00.2 14 10 5 40 30 M6×16 C5 - 28 20 110
SSD
SSD2-CB-32 ø32 6.6 13 4.5 20 - 18.2 +00.2 14 10 5 45 30 M6×16 - 10 34 36 159

CAT SSD2-CB-40 ø40 6.6 14 5 22 - 18.2 +00.2 14 10 6 52 32 M6×16 - 10 40 36 207

SSD2-CB-50 ø50 9 16 6 28 - 22.2 +00.2 20 14 7 64 42 M8×20 - 14 50 44 420

MDC2 SSD2-CB-63 ø63 11 18 7 30 - 22.2 +00.2 20 14 8 77 44 M10×25 - 14 60 44 605

SSD2-CB-80 ø80 13.5 23 9 38 - 28.2 +00.2 27 18 10 98 56 M12×40 - 18 77 56 1222

MVC SSD2-CB-100 ø100 13.5 20 12 45 - 32.2 +00.2 31 22 13 117 67 M12×40 - 22 94 64 2031

*1: The mounting brackets for SSD2 are the same dimensions as the compact mounting brackets for SSD.
Check the General Catalog (CB-029SA) in order to avoid mistakes.
SMG (Example: SSD2-CB-32 is the same dimensions as SSD-CB2-32.)

MSD/
MSDG
● Clevis bracket (CB) included pin dimensions table (P)
FC* Material: S
 teel
Zinc
STK chromate
I treatment
SRL3 J

SRG3
øCD

SRM3

SRT3
Applicable Applicable Weight
Model No. I J CD
bore size snap ring (g)
MRL2
SSD2-P-12 ø12 15.2 10.2 5 -0.01
-0.028 E type 4 2.4
-0.01
SSD2-P-16 ø16 18 13 5 E type 4 2.8
MRG2
-0.028
-0.025
SSD2-P-20 ø20 21 16.2 8 -0.047 C type for shaft 8 8.2
SSD2-P-25 ø25 25.6 20.2 10 -0.025
-0.047 C type for shaft 10 16
SM‑25
SSD2-P-32 ø32/ø40 41.6 36.2 10 -0.025
-0.047 C type for shaft 10 25
SSD2-P-50 ø50/ø63 50.6 44.2 14 -0.032
-0.059 C type for shaft 14 60
ShkAbs
SSD2-P-80 ø80 64 56.2 18 -0.032
-0.059 C type for shaft 18 124
SSD2-P-100 ø100 72 64.2 22 -0.040
-0.083 C type for shaft 22 213
FJ

FK
Spd
Contr

Ending

1048
 SSD2 Series
Accessory dimensions
Dimensions (Accessory: I, Y) SCP*3
● Rod eye (I) Material: S
 teel Material: C
 ast iron
· ø12 to ø25 Zinc chromate · ø32 to ø100 Painting CMK2
treatment
CB
CMA2

R
CB
C(

RR
*1)

SCM

MC
SCG
MC

MA
H10
CD
SCA2
MA

CA
0
H1
CD
CA

AA
SCS2
AA

KK
KK
CKV2
□E
øE
CAV2/
COVP/N2
*1: ø20/25 are SR RR
Model No. Bore size AA CA CB CD E KK MA C RR MC Weight (g) SSD2
SSD2-I-12 ø12 6 16 5 -0.2
-0.4 5 □10 M5×0.8 7 2 - 5.5 9
SSD2-I-16 ø16 8 25 6.5-0.2
-0.4 5 □12 M6×1 14 2 - 7 21 SSG
SSD2-I-20 ø20 8.5 25 8 -0.2
-0.4 8 □16 M8×1.25 11.5 - 13.4 9 38
SSD2-I-25 ø25 10.5 30 10 -0.2
-0.4 10 □20 M10×1.25 14 - 17.1 11 71 SSD
-0.3
SSD2-I-32 ø32/ø40 14 30 18 -0.5 10 ø22 M14×1.5 14 - 12 12 74
SSD2-I-50 ø50/ø63 18 40 22 -0.3
-0.5 14 ø28 M18×1.5 20 - 16 16 155 CAT
SSD2-I-80 ø80 21 50 28 -0.3
-0.5 18 ø38 M22×1.5 27 - 21 21 380
SSD2-I-100 ø100 21 55 32 -0.3
-0.5 22 ø44 M26×1.5 31 - 24 24 550 MDC2
*1: The accessories for SSD2 are the same dimensions as the compact accessories for SSD.
Check the General Catalog (CB-029SA) in order to avoid mistakes. MVC
(Example: SSD2-I-32 is the same dimensions as SSD-I2-32.)

SMG
● Rod clevis (Y) Material: Steel Material: C
 ast iron
· ø12 to ø25 Zinc · ø32 to ø100 Painting MSD/
chromate MSDG
treatment CV
FC*
CV
CB
STK
CB
C(

R
RR
*1)

SRL3
MC

SRG3
MC

MB

H10 0
CD H1
MB

CD SRM3
CA
CA

AB

SRT3
AB

KK KK

MRL2
øE
□E
*1: ø20/25 are SR RR
*2: A pin (including C ring) is included.
MRG2
*3: The pins for the rod clevis are common with the pins for the clevis brackets.
Model No. Bore size AB CA CB CD CV E KK MB C RR MC Weight (g) SM‑25
SSD2-Y-12 ø12 6 16 5 +0.4
+0.2 5 10 □10 M5×0.8 7 2 - 5.5 12
SSD2-Y-16 ø16 11 21 6.5 +0.4
+0.2 5 12 □12 M6×1 10 2 - 7 20 ShkAbs
SSD2-Y-20 ø20 13.5 25 8 +0.4
+0.2 8 16 □16 M8×1.25 11.5 - 13.4 9 45
SSD2-Y-25 ø25 16 30 10 +0.4
+0.2 10 20 □20 M10×1.25 14 - 17.1 11 84 FJ
+0.5
SSD2-Y-32 ø32/ø40 16 30 18 +0.3 10 36 ø22 M14×1.5 14 - 12 12 120
SSD2-Y-50 ø50/ø63 20 40 22 +0.5
+0.3 14 44 ø28 M18×1.5 20 - 16 16 257 FK
SSD2-Y-80 ø80 23 50 28 +0.5
18 56 ø38 M22×1.5 27 - 21 21 589
+0.3
Spd
SSD2-Y-100 ø100 24 55 32 +0.5
+0.3 22 64 ø44 M26×1.5 31 - 24 24 933 Contr
*1: The accessories for SSD2 are the same dimensions as the compact accessories for SSD.
Check the General Catalog (CB-029SA) in order to avoid mistakes. Ending
(Example: SSD2-Y-32 is the same dimensions as SSD-Y2-32.)

1049