Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    Service Bulletin: Area Application: Others (Indonesia) Model Name: CALYA Model Code: B401

    Uploaded by

    Muhayyang
    This service bulletin provides instructions for registering key codes for the wireless door lock control system of a Calya vehicle. It outlines a 7-step process to register recognition codes for up to 4 transmitters, which involves specific operations with the ignition key, door lock knob, and transmitter unlock switch within timed windows. Upon successful registration, an operation check should be performed to ensure the wireless door lock control functions properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Service Bulletin: Area Application: Others (Indonesia) Model Name: CALYA Model Code: B401

    Uploaded by

    Muhayyang
    85 views4 pages
    This service bulletin provides instructions for registering key codes for the wireless door lock control system of a Calya vehicle. It outlines a 7-step process to register recognition codes for up to 4 transmitters, which involves specific operations with the ignition key, door lock knob, and transmitter unlock switch within timed windows. Upon successful registration, an operation check should be performed to ensure the wireless door lock control functions properly.

    Original Title

    SB Wireless Registration

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service bulletin provides instructions for registering key codes for the wireless door lock control system of a Calya vehicle. It outlines a 7-step process to register recognition codes for up to 4 transmitters, which involves specific operations with the ignition key, door lock knob, and transmitter unlock switch within timed windows. Upon successful registration, an operation check should be performed to ensure the wireless door lock control functions properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views4 pages

    Service Bulletin: Area Application: Others (Indonesia) Model Name: CALYA Model Code: B401

    Uploaded by

    Muhayyang
    This service bulletin provides instructions for registering key codes for the wireless door lock control system of a Calya vehicle. It outlines a 7-step process to register recognition codes for up to 4 transmitters, which involves specific operations with the ignition key, door lock knob, and transmitter unlock switch within timed windows. Upon successful registration, an operation check should be performed to ensure the wireless door lock control functions properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Section : Body Electrical

    Ref. No. : BE-6106

    Service Bulletin Date :


    Page :
    Jul.,2016
    1 of 4

    Area Application : Others(Indonesia)


    Model Name : CALYA
    Model Code : B401

    Subject : WIRELESS DOOR LOCK CONTROL SYSTEM (KEY CODE


    REGISTRATION)
    This Service Bulletin informs you of the key code registration procedure for the wireless door lock control
    system.
    Part No. Information :
    New Part No. New Part Name Qty
    NA NA NA

    Production Effective :
    VIN Production Date
    NA From July, 2016

    TECHNICAL SERVICE DIV.


    Ref. No. : BE-6106

    Service Bulletin Page : 2 of 4

    DOOR LOCK
    WIRELESS DOOR LOCK CONTROL SYSTEM
    REGISTRATION
    1. REGISTRATION OF RECOGNITION CODE
    HINT:
    • The recognition code registration is necessary when replacing the main body ECU (fuse block
    assembly), having lost or adding the door control transmitter(s).
    • A maximum of 4 recognition codes can be registered in the main body ECU (fuse block
    assembly), so that a maximum of 4 transmitters can be used. When 2 or more transmitters need
    to be registered, register the transmitters in sequence by following the procedures listed below.
    • When a new transmitter is registered, all the previously registered code(s) in the main body ECU
    (fuse block assembly) will be erased.
    • Disconnecting the negative (-) battery terminal does not erase the registered code(s) from the
    memory in the main body ECU (fuse block assembly).
    (a) Check that the following conditions are met.
    (1) No key is in the ignition key cylinder.
    (2) Disconnect the battery negative (-) terminal.
    (3) The driver side door is open.
    (4) The driver side door lock knob is unlocked.
    (b) Reconnect the battery negative (-) terminal.
    (c) Perform the following operations within 30 seconds.
    (1) Insert the key in the ignition key cylinder.
    (2) Remove the key from the ignition key cylinder.
    (3) Operate the driver door lock knob to repeat lock and unlock 3 times (Door lock: unlock →
    lock → unlock → lock → unlock → lock → unlock).
    (4) Close and open the driver door (driver door: open → closed → open).
    (5) Check that the response operation is made as shown in the illustration.

    Response to registration mode:

    Main body ECU (fuse block assembly) automatically performs power door unlock/lock operation.

    Unlock/Lock Occurs Once

    Unlock
    Door Unlock/Lock
    Position
    Lock
    within 0.1 seconds

    B413868E02

    HINT:
    If the unlock/lock operation is not performed, registration of recognition code has failed.
    Repeat the registration procedure from the beginning.
    (d) Perform the following operations within 15 seconds.
    (1) Press and hold the unlock switch for 5 seconds or more.

    TECHNICAL SERVICE DIV.


    Ref. No. : BE-6106

    Service Bulletin Page : 3 of 4

    (2) Check that the response operation is made as shown in the illustration.

    Response to registration mode:

    Main body ECU (fuse block assembly) automatically performs power door unlock/lock operation.

    Unlock/Lock Occurs Once

    Unlock
    Door Unlock/Lock
    Position
    Lock
    within 0.1 seconds

    B413868E02

    HINT:
    If the unlock/lock operation is not performed, registration of recognition code has failed.
    Repeat the registration procedure from the beginning.
    (e) Perform the following operations within 15 seconds.
    (1) Press and hold the unlock switch for 1 second or more.
    (2) Check that the response operation is made as shown in the illustration.

    Response to registration mode:

    Main body ECU (fuse block assembly) automatically performs power door unlock/lock operation.

    Unlock/Lock Occurs Once

    Unlock
    Door Unlock/Lock
    Position
    Lock
    within 0.1 seconds

    B413868E02

    HINT:
    If the unlock/lock operation is not performed, registration of recognition code has failed.
    Repeat the registration procedure from the beginning.
    (f) To register 2 or more transmitters, repeat from step (d).
    HINT:
    Step (d) must be performed within 15 seconds. If more than 15 seconds elapse after code
    registration, the registration mode will end.
    (g) Registration of the recognition codes is completed.

    TECHNICAL SERVICE DIV.


    Ref. No. : BE-6106

    Service Bulletin Page : 4 of 4

    (h) Perform the following after registration is completed.


    (1) Perform the wireless door lock control operation check. (See pub. RM34D0ED, DOOR
    LOCK > WIRELESS DOOR LOCK CONTROL SYSTEM > OPERATION CHECK)
    HINT:
    If the wireless door lock control does not operate, perform the registration procedure
    again.

    TECHNICAL SERVICE DIV.

    You might also like