iglidur...

round bars, tubes,

plates and tapes

...
...
...plastics
iglidur® bar stock | Product overview
iglidur® round bars – All-rounder
New

iglidur® M250: iglidur® P210: Good iglidur® J4: iglidur® GLW:

Excellent vibration coefficients of friction and Wear resistant and cost- Low-cost material for high
dampening wear on almost every shaft effective quantities
Page 618 Page 618 Page 619 Page 619

iglidur® round bars – Endurance runner

iglidur® J260: iglidur® R: iglidur® J200: iglidur® JB:

Ideal for plastic shafts Low-cost Specially for aluminium Extreme wear resistant
shafts in black
Page 622 Page 622 page 623 Page 623

iglidur® round material – For contact with food

iglidur® A181: The food all- iglidur® A350: The FDA- iglidur® A500: The media ilgidur® A180:
rounder, compliant with FDA compliant endurance and temperature specialist The food all-rounder
and EC directive 10/2011 runner at high temperatures in the food sector
Page 626 Page 626 Page 627 Page 627

iglidur® round material – For special applications

iglidur® F2: iglidur® J2: iglidur® RW370:

Used to prevent Versatile and Flame-retardant, according
electro-static charges cost-effective to DIN EN 45545
Page 629 Page 630 Page 630

iglidur® plates

iglidur® J: iglidur® JB: iglidur® A350: The FDA-

The versatile endurance Extreme wear resistant compliant endurance runner
runner in black at higher temperatures
Page 632 Page 633 Page 633

608
 iglidur® round bars – Endurance runner

iglidur® J: iglidur® W300: iglidur® J3: iglidur® J350: Endurance

The versatile endurance The classic endurance Specialist for pulsating runner with high dimensional
runner runner up to 30 MPa loads stability at high temperature
Page 620 Page 620 Page 621 Page 621

iglidur® round material – For high temperatures ... – High media resistance

iglidur® X: iglidur® HSD350: iglidur® H1 : iglidur® C500:

The chemical and All-rounder suitable for Endurance runner with For extreme
temperature specialist steam sterilisation high media resistance ambient conditions
Page 624 Page 624 page 625 Page 625

iglidur® round material – For contact with food

iglidur® A160: "Food" iglidur® UW160: iglidur® T220:

material with high media For contact with drinking For the tobacco industry
resistance up to +90 °C water
Page 628 Page 628 Page 629

iglidur® tubes Mechanical processing

iglidur® J: speedicut:
The versatile endurance Special parts fast,
runner machined to drawing
Page 631 Page 635

iglidur® Tribo-Tape

Material iglidur® A160: Material iglidur® B160: Material iglidur® W160: Material iglidur® V400:
FDA-compliant For use in visible areas Lubrication-free Tribo-Tape Extremely high wear
in white – hardly any wear resistance
Page 640 Page 641 Page 642 Page 643

609
610
 ®
iglidur bar stock
iglidur® materials as round bars, tubes and plates
Fast and cost-effective
Cut to required size
Mechanical processing from a batch size of 1
Maintenance-free and calculable
Standard range from stock
iglidur® bar stock | Advantages
Round bars and plates for free design

Bar stocks made

from technical plastic:
iglidur® in one piece
iglidur® for free design – as plastic bar stock to
make your own or as machine finished special
components - for prototypes, test components
and small quantity needs.
O iglidur® materials as round material from
stock or mechanically ready-machined
special components and special sizes in 3 to
5 days
O Lubrication and maintenance-free
O Easy to machine – ask for tips
O Tribologically optimised plastic bar stocks as
round bars, tubes and plates
O Service life can now also be calculated for
machined bearings made from iglidur® plastic
bar stocks
O No minimum order value
O From batch size 1

Available from stock igus® constantly expands its range of available

Detailed information about delivery time online. materials and dimensions. Check the current stock
Further materials and dimensions upon request. online www.igus.eu/barstock

Operation temperatures: In addition to bar stocks, we will also gladly offer

–50 °C up to +90 °C (standard iglidur® J) you mechanical processing in line with a drawing.
–100 °C up to +250 °C (depending on
material)

26 materials Service life calculation

Round bars: Ø 10–100 mm www.igus.eu/barstock-expert
Plate thickness: 2–40 mm
Tubes: up to 150 mm outer Ø

612 Product finder online www.igus.eu/barstock-finder

iglidur® bar stock | Product overview
Round bars and plates for free design

iglidur® round bars iglidur® tubes

O Currently 26 iglidur® materials to choose from O Large outer diameters 110–150 mm
O Outer diameter 10–100 mm O Low wear against different shaft materials
O Excellent wear rates and coefficients of friction From page 631
O For special dimensions in small quantities
From page 618

iglidur® plates speedicut: Machined parts and cutting

O Versatile application options O Special parts according to customer request
O Plate thickness 2–40 mm O Prototypes available in a matter of days
From page 632 From page 635

Service life calculation online www.igus.eu/barstock-expert 613

iglidur® materials | Selection according to main criteria
iglidur® M250 P210 J4 GLW J W300 J3 J350 J260 R J200 JB X
Descriptive technical specifications
Wear resistance
at +23°C
Wear resistance
at +90 °C
Wear resistance
at +150 °C
Low coefficients of
friction
Low moisture
absorption
Wear resistance
under water
High media
resistance
Edge
pressure
Resistant to impacts/
shock

Resistant to dirt

Price index141)

For high loads

( > 60 MPa)

Corrosion free

Electrically conductive

Approvals and standards

RoHS-II 2011/65/EC

FDA- and/or
EC10/2011 compliant
Fire class in
V-2 HB F HB HB HB HB V-0 V-2 HB HB HB V-0
accordance with UL-94

Availabilities / variants

Bar stock, round bar

Bar stock, tube

Stock plate

Machined made from

bar stocks

Tribo-Tape
141)
Price index

Low price category Medium price category Highest price category

614 Product finder online www.igus.eu/barstock-finder

HSD350 H1 C500 A181 A350 A500 A180 A160 UW160 T220 F2 J2 RW370 W160 B160 V400

V-0 V-0 V-0 HB V-0 V-1 HB HB HB HB HB HB V-0 HB HB V-0

Service life calculation online www.igus.eu/barstock-expert 615

iglidur® bar stocks | Material properties table

iglidur® Unit M250 P210 J4 GLW J W300 J3 J350 J260 R

General properties

Density [g/cm3] 1.14 1.40 1.48 1.36 1.49 1.24 1.42 1.44 1.35 1.39

Colour

Max. moisture absorption at

[% weight] 1.4 0.3 0.3 1.3 0.3 1.3 0.3 0.3 0.2 0.2
+23 °C/50 % r.h.

Max. water absorption [% weight] 7.6 0.5 1.3 5.5 1.3 6.5 1.3 1.6 0.4 1.1

Coefficient of sliding friction, 0.18– 0.07– 0.06– 0.10– 0.06– 0.08– 0.06– 0.10– 0.06– 0.09–
[µ]
dynamic, against steel 0.40 0.19 0.20 0.24 0.18 0.23 0.20 0.20 0.20 0.25

pv value, max. (dry) [MPa · m/s] 0.12 0.4 0.30 0.30 0.34 0.23 0.5 0.45 0.35 0.27

Mechanical properties

Flexural modulus [MPa] 2,700 2,500 2,350 7,700 2,400 3,500 2,700 2,000 2,200 1,950

Flexural strength at +20 °C [MPa] 112 70 70 235 73 125 70 55 60 70

Compressive strength [MPa] 52 50 55 74 60 61 60 60 50 68

Max. permissible surface

[MPa] 20 50 35 80 35 60 45 60 40 23
pressure at +20 °C

Shore-D-Hardness 79 75 74 78 74 77 73 80 77 77

Physical and thermal properties

Max. permissible application
[°C] +80 +100 +90 +100 +90 +90 +90 +180 +120 +90
temperature, continuous
Max. short-term application
[°C] +170 +160 +120 +160 +120 +180 +120 +220 +140 +110
temperature
Min. long-term application
[°C] –40 –40 –50 –40 –50 –40 –50 –100 –100 –50
temperature

Thermal conductivity [W/m · K] 0.24 0.25 0.25 0.24 0.25 0.24 0.25 0.24 0.24 0.25

Coefficient of thermal
[K–1 · 10–5] 10 8 10 17 10 9 13 7 13 11
expansion at +23°C

Electrical properties

Specific contact resistance [Ωcm] > 1013 > 1012 > 1013 > 1011 > 1013 > 1013 > 1012 > 1013 > 1012 > 1012

Surface resistance [Ω] > 1011 > 1011 > 1013 > 1011 > 1012 > 1012 > 1012 > 1010 > 1010 > 1012

Page 618 618 619 619 620 620 621 621 622 622

616 Product finder online www.igus.eu/barstock-finder

J200 JB X HSD350 H1 C500 A181 A350 A500 A180 A160 UW160 T220 F2 J2 RW370

1.72 1.49 1.44 1.39 1.53 1.37 1.38 1.42 1.28 1.46 1.00 1.04 1.28 1.52 1.44 1.34

0.2 0.3 0.1 0.6 0.1 0.3 0.2 0.6 0.3 0.2 0.1 0.1 0.3 0.2 0.2 0.25

0.7 1.3 0.5 1.2 0.3 0.5 1.3 1.9 0.5 1.3 0.1 0.1 0.5 0.4 1.3 1.2

0.11– 0.06– 0.09– 0.07– 0.06– 0.07– 0.10– 0.10– 0.26– 0.05– 0.09– 0.17– 0.20– 0.16– 0.11– 0.13–
0.17 0.18 0.27 0.23 0.20 0.19 0.21 0.20 0.41 0.23 0.19 0.31 0.32 0.22 0.27 0.17

0.3 0.34 1.32 0.3 0.80 0.7 0.31 0.40 0.28 0.31 0.25 0.22 0.28 0.31 0.23 1.2

2,800 2,400 8,100 2,150 2,800 3,000 1,913 2,000 3,600 2,300 1,151 1,349 1,800 7,418 3,605 2,997

58 73 170 67 55 100 48 110 140 88 19 22 65 93 101 100

43 60 100 44 78 110 60 78 118 78 37 32 55 61 77 129

23 35 150 30 80 110 31 60 120 28 15 15 40 47 46 75

70 74 85 77 77 81 76 76 83 76 60 60 76 72 n.s. 80

+90 +90 +250 +180 +200 +250 +90 +180 +250 +90 +90 +90 +100 +120 +90 +170

+120 +120 +315 +210 +240 +300 +110 +210 +300 +110 +100 +100 +160 +165 +110 +190

–50 –50 –100 –40 –40 –100 –50 –100 –100 –50 –50 –50 –40 –40 –50 –50

0.24 0.25 0.60 0.24 0.24 0.24 0.25 0.24 0.24 0.25 0.30 0.50 0.24 0.61 0.25 n.s.

8 10 5 7 6 9 11 8 9 11 11 18 11 5 7 n.s.

> 108 > 1013 < 105 > 1013 > 1012 > 1014 > 1012 > 1011 > 1014 > 1012 > 1012 > 1012 > 1010 < 109 > 1013 > 1012

> 108 > 1012 < 103 > 1014 > 1011 > 1013 > 1012 > 1011 > 1013 > 1011 > 1012 > 1012 > 1010 < 109 > 1012 > 1012

623 623 624 624 625 625 626 626 627 627 628 628 629 629 630 630

Service life calculation online www.igus.eu/barstock-expert 617

 iglidur®
bar stock iglidur® round bars | Product range
Excellent vibration dampening – iglidur® M250

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRM250-1000-†16)
45 100–1,000 16)
SFRM250-4500-†
15 100–1,000 16)
SFRM250-1500-† 50 100–1,000 16)
SFRM250-5000-†
20 100–1,000 SFRM250-2000-†16)
55 100–1,000 16)
SFRM250-5500-†
25 100–1,000 16)
SFRM250-2500-† 60 100–1,000 16)
SFRM250-6000-†
30 100–1,000 16)
SFRM250-3000-† 65 100–1,000 16)
SFRM250-6500-†
35 100–1,000 16)
SFRM250-3500-† 80 100–1,000 16)
SFRM250-8000-†
40 100–1,000 16)
SFRM250-4000-† 100 100–1,000 16)
SFRM250-10000-†

Good coefficients of friction and wear on almost every shaft – iglidur® P210

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRP210-1000-†16)
45 100–1,000 16)
SFRP210-4500-†
15 100–1,000 16)
SFRP210-1500-† 50 100–1,000 16)
SFRP210-5000-†
20 100–1,000 16)
SFRP210-2000-† 55 100–1,000 16)
SFRP210-5500-†
25 100–1,000 16)
SFRP210-2500-† 60 100–1,000 SFRP210-6000-†16)

30 100–1,000 SFRP210-3000-†16)
65 100–1,000 SFRP210-6500-†16)

35 100–1,000 16)
SFRP210-3500-† 80 100–1,000 SFRP210-8000-†16)

40 100–1,000 SFRP210-4000-†16)
100 100–1,000 SFRP210-10000-† 16)

Available from stock

Produced to special order

618 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
Wear resistant and cost-effective – iglidur® J4

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ4-1000-† 16)
45 100–1,000 16)
SFRJ4-4500-†
15 100–1,000 16)
SFRJ4-1500-† 50 100–1,000 16)
SFRJ4-5000-†
20 100–1,000 SFRJ4-2000-† 16)
55 100–1,000 16)
SFRJ4-5500-†
25 100–1,000 16)
SFRJ4-2500-† 60 100–1,000 16)
SFRJ4-6000-†
30 100–1,000 SFRJ4-3000-† 16)
65 100–1,000 16)
SFRJ4-6500-†
35 100–1,000 16)
SFRJ4-3500-† 80 100–1,000 16)
SFRJ4-8000-†
40 100–1,000 16)
SFRJ4-4000-† 100 100–1,000 16)
SFRJ4-10000-†

Low-cost material for high quantities – iglidur® GLW

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRGLW-1000-† 16)
45 100–1,000 16)
SFRGLW-4500-†
15 100–1,000 16)
SFRGLW-1500-† 50 100–1,000 16)
SFRGLW-5000-†
20 100–1,000 16)
SFRGLW-2000-† 55 100–1,000 16)
SFRGLW-5500-†
25 100–1,000 16)
SFRGLW-2500-† 60 100–1,000 16)
SFRGLW-6000-†
30 100–1,000 16)
SFRGLW-3000-† 65 100–1,000 16)
SFRGLW-6500-†
35 100–1,000 16)
SFRGLW-3500-† 80 100–1,000 16)
SFRGLW-8000-†
40 100–1,000 16)
SFRGLW-4000-† 100 100–1,000 16)
SFRGLW-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 619

 iglidur®
bar stock iglidur® round bars | Product range
The versatile endurance runner – iglidur® J

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ-1000-†16)
45 100–1,000 16)
SFRJ-4500-†
15 100–1,000 16)
SFRJ-1500-† 50 100–1,000 16)
SFRJ-5000-†
20 100–1,000 SFRJ-2000-†16)
55 100–1,000 16)
SFRJ-5500-†
25 100–1,000 16)
SFRJ-2500-† 60 100–1,000 16)
SFRJ-6000-†
30 100–1,000 16)
SFRJ-3000-† 65 100–1,000 16)
SFRJ-6500-†
35 100–1,000 16)
SFRJ-3500-† 80 100–1,000 SFRJ-8000-†16)

40 100–1,000 16)
SFRJ-4000-† 100 100–1,000 SFRJ-10000-† 16)

The classic endurance runner up to 30 MPa – iglidur® W300

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRW-1000-† 16)
45 100–1,000 16)
SFRW-4500-†
15 100–1,000 16)
SFRW-1500-† 50 100–1,000 16)
SFRW-5000-†
20 100–1,000 16)
SFRW-2000-† 55 100–1,000 16)
SFRW-5500-†
25 100–1,000 16)
SFRW-2500-† 60 100–1,000 16)
SFRW-6000-†
30 100–1,000 16)
SFRW-3000-† 65 100–1,000 16)
SFRW-6500-†
35 100–1,000 16)
SFRW-3500-† 80 100–1,000 16)
SFRW-8000-†
40 100–1,000 16)
SFRW-4000-† 100 100–1,000 16)
SFRW-10000-†

Available from stock

Produced to special order

620 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
Specialist for pulsating loads – iglidur® J3

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ3-1000-† 16)
45 100–1,000 16)
SFRJ3-4500-†
15 100–1,000 16)
SFRJ3-1500-† 50 100–1,000 16)
SFRJ3-5000-†
20 100–1,000 SFRJ3-2000-† 16)
55 100–1,000 16)
SFRJ3-5500-†
25 100–1,000 16)
SFRJ3-2500-† 60 100–1,000 16)
SFRJ3-6000-†
30 100–1,000 16)
SFRJ3-3000-† 65 100–1,000 16)
SFRJ3-6500-†
35 100–1,000 16)
SFRJ3-3500-† 80 100–1,000 SFRJ3-8000-†16)

40 100–1,000 16)
SFRJ3-4000-† 100 100–1,000 SFRJ3-10000-† 16)

Endurance runner with high dimensional stability at high temperature – iglidur® J350

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
®
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ350-1000-† 16)
45 100–1,000 16)
SFRJ350-4500-†
15 100–1,000 16)
SFRJ350-1500-† 50 100–1,000 16)
SFRJ350-5000-†
20 100–1,000 16)
SFRJ350-2000-† 55 100–1,000 16)
SFRJ350-5500-†
25 100–1,000 16)
SFRJ350-2500-† 60 100–1,000 16)
SFRJ350-6000-†
30 100–1,000 SFRJ350-3000-† 16)
65 100–1,000 16)
SFRJ350-6500-†
35 100–1,000 16)
SFRJ350-3500-† 80 100–1,000 16)
SFRJ350-8000-†
40 100–1,000 16)
SFRJ350-4000-† 100 100–1,000 16)
SFRJ350-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 621

 iglidur®
bar stock iglidur® round bars | Product range
Ideal for plastic shafts – iglidur® J260

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ260-1000-† 16)
45 100–1,000 16)
SFRJ260-4500-†
15 100–1,000 16)
SFRJ260-1500-† 50 100–1,000 16)
SFRJ260-5000-†
20 100–1,000 SFRJ260-2000-† 16)
55 100–1,000 16)
SFRJ260-5500-†
25 100–1,000 16)
SFRJ260-2500-† 60 100–1,000 16)
SFRJ260-6000-†
30 100–1,000 16)
SFRJ260-3000-† 65 100–1,000 16)
SFRJ260-6500-†
35 100–1,000 16)
SFRJ260-3500-† 80 100–1,000 16)
SFRJ260-8000-†
40 100–1,000 SFRJ260-4000-† 16)
100 100–1,000 16)
SFRJ260-10000-†

Low-cost – iglidur® R

Order key for round bars

Type Dimensions [mm]

iglidur® material

16)
Length in mm
Bar stock

Length16)

from 100 to 1,000,

Outer Ø

Inner Ø
Round

graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRR-1000-†16)
45 100–1,000 16)
SFRR-4500-†
15 100–1,000 16)
SFRR-1500-† 50 100–1,000 16)
SFRR-5000-†
20 100–1,000 16)
SFRR-2000-† 55 100–1,000 16)
SFRR-5500-†
25 100–1,000 16)
SFRR-2500-† 60 100–1,000 16)
SFRR-6000-†
30 100–1,000 16)
SFRR-3000-† 65 100–1,000 16)
SFRR-6500-†
35 100–1,000 16)
SFRR-3500-† 80 100–1,000 16)
SFRR-8000-†
40 100–1,000 16)
SFRR-4000-† 100 100–1,000 16)
SFRR-10000-†

Available from stock

Produced to special order

622 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
Specially for aluminium shafts – iglidur® J200

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ200-1000-† 16)
45 100–1,000 16)
SFRJ200-4500-†
15 100–1,000 16)
SFRJ200-1500-† 50 100–1,000 16)
SFRJ200-5000-†
20 100–1,000 SFRJ200-2000-† 16)
55 100–1,000 16)
SFRJ200-5500-†
25 100–1,000 16)
SFRJ200-2500-† 60 100–1,000 16)
SFRJ200-6000-†
30 100–1,000 16)
SFRJ200-3000-† 65 100–1,000 16)
SFRJ200-6500-†
35 100–1,000 16)
SFRJ200-3500-† 80 100–1,000 SFRJ200-8000-†16)

40 100–1,000 16)
SFRJ200-4000-† 100 100–1,000 SFRJ200-10000-† 16)

Extreme wear resistant in black – iglidur® JB

Order key for round bars

Type Dimensions [mm]

iglidur® material

16)
Length in mm
Bar stock

Length16)

from 100 to 1,000,

Outer Ø

Inner Ø
Round

graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJB-1000-† 16)
45 100–1,000 16)
SFRJB-4500-†
15 100–1,000 16)
SFRJB-1500-† 50 100–1,000 16)
SFRJB-5000-†
20 100–1,000 16)
SFRJB-2000-† 55 100–1,000 16)
SFRJB-5500-†
25 100–1,000 16)
SFRJB-2500-† 60 100–1,000 16)
SFRJB-6000-†
30 100–1,000 16)
SFRJB-3000-† 65 100–1,000 16)
SFRJB-6500-†
35 100–1,000 16)
SFRJB-3500-† 80 100–1,000 16)
SFRJB-8000-†
40 100–1,000 16)
SFRJB-4000-† 100 100–1,000 16)
SFRJB-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 623

 iglidur®
bar stock iglidur® round bars | Product range
The chemical and temperature specialist – iglidur® X

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRX-1000-†16)
45 100–1,000 16)
SFRX-4500-†
15 100–1,000 16)
SFRX-1500-† 50 100–1,000 16)
SFRX-5000-†
20 100–1,000 SFRX-2000-†16)
55 100–1,000 16)
SFRX-5500-†
25 100–1,000 16)
SFRX-2500-† 60 100–1,000 16)
SFRX-6000-†
30 100–1,000 16)
SFRX-3000-† 65 100–1,000 16)
SFRX-6500-†
35 100–1,000 16)
SFRX-3500-† 80 100–1,000 16)
SFRX-8000-†
40 100–1,000 SFRX-4000-†16)
100 100–1,000 16)
SFRX-10000-†

All-rounder suitable for steam sterilisation – iglidur® HSD350

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
®
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRHSD350-1000-† 16)
45 100–1,000 16)
SFRHSD350-4500-†
15 100–1,000 16)
SFRHSD350-1500-† 50 100–1,000 16)
SFRHSD350-5000-†
20 100–1,000 16)
SFRHSD350-2000-† 55 100–1,000 16)
SFRHSD350-5500-†
25 100–1,000 16)
SFRHSD350-2500-† 60 100–1,000 16)
SFRHSD350-6000-†
30 100–1,000 16)
SFRHSD350-3000-† 65 100–1,000 16)
SFRHSD350-6500-†
35 100–1,000 16)
SFRHSD350-3500-† 80 100–1,000 16)
SFRHSD350-8000-†
40 100–1,000 16)
SFRHSD350-4000-† 100 100–1,000 16)
SFRHSD350-10000-†

Available from stock

Produced to special order

624 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
Endurance runner with high media resistance – iglidur® H1

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRH1-1000-† 16)
45 100–1,000 16)
SFRH1-4500-†
15 100–1,000 16)
SFRH1-1500-† 50 100–1,000 16)
SFRH1-5000-†
20 100–1,000 SFRH1-2000-† 16)
55 100–1,000 16)
SFRH1-5500-†
25 100–1,000 16)
SFRH1-2500-† 60 100–1,000 16)
SFRH1-6000-†
30 100–1,000 SFRH1-3000-† 16)
65 100–1,000 16)
SFRH1-6500-†
35 100–1,000 16)
SFRH1-3500-† 80 100–1,000 16)
SFRH1-8000-†
40 100–1,000 SFRH1-4000-† 16)
100 100–1,000 16)
SFRH1-10000-†

For extreme ambient conditions – iglidur® C500

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
®
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRC500-1000-† 16)
45 100–1,000 16)
SFRC500-4500-†
15 100–1,000 16)
SFRC500-1500-† 50 100–1,000 16)
SFRC500-5000-†
20 100–1,000 16)
SFRC500-2000-† 55 100–1,000 16)
SFRC500-5500-†
25 100–1,000 16)
SFRC500-2500-† 60 100–1,000 16)
SFRC500-6000-†
30 100–1,000 16)
SFRC500-3000-† 65 100–1,000 16)
SFRC500-6500-†
35 100–1,000 16)
SFRC500-3500-† 80 100–1,000 16)
SFRC500-8000-†
40 100–1,000 16)
SFRC500-4000-† 100 100–1,000 16)
SFRC500-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 625

 iglidur®
bar stock iglidur® round bars | Product range
The food all-rounder, compliant with FDA-compliant and EC directive
10/2011 – iglidur® A181

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 16)
SFRA181-1000-† 45 100–1,000 16)
SFRA181-4500-†
15 100–1,000 SFRA181-1500-†16)
50 100–1,000 16)
SFRA181-5000-†
20 100–1,000 16)
SFRA181-2000-† 55 100–1,000 16)
SFRA181-5500-†
25 100–1,000 16)
SFRA181-2500-† 60 100–1,000 16)
SFRA181-6000-†
30 100–1,000 16)
SFRA181-3000-† 65 100–1,000 16)
SFRA181-6500-†
35 100–1,000 16)
SFRA181-3500-† 80 100–1,000 16)
SFRA181-8000-†
40 100–1,000 16)
SFRA181-4000-† 100 100–1,000 16)
SFRA181-10000-†

The FDA-compliant endurance runner at high temperatures – iglidur® A350

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA350-1000-†16)
45 100–1,000 16)
SFRA350-4500-†
15 100–1,000 16)
SFRA350-1500-† 50 100–1,000 16)
SFRA350-5000-†
20 100–1,000 16)
SFRA350-2000-† 55 100–1,000 16)
SFRA350-5500-†
25 100–1,000 16)
SFRA350-2500-† 60 100–1,000 16)
SFRA350-6000-†
30 100–1,000 SFRA350-3000-†16)
65 100–1,000 16)
SFRA350-6500-†
35 100–1,000 16)
SFRA350-3500-† 80 100–1,000 16)
SFRA350-8000-†
40 100–1,000 16)
SFRA350-4000-† 100 100–1,000 16)
SFRA350-10000-†

Available from stock

Produced to special order

626 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
The media and temperature specialist in the food sector – iglidur® A500

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA500-1000-† 16)
45 100–1,000 16)
SFRA500-4500-†
15 100–1,000 16)
SFRA500-1500-† 50 100–1,000 16)
SFRA500-5000-†
20 100–1,000 SFRA500-2000-† 16)
55 100–1,000 16)
SFRA500-5500-†
25 100–1,000 16)
SFRA500-2500-† 60 100–1,000 16)
SFRA500-6000-†
30 100–1,000 16)
SFRA500-3000-† 65 100–1,000 16)
SFRA500-6500-†
35 100–1,000 16)
SFRA500-3500-† 80 100–1,000 SFRA500-8000-†16)

40 100–1,000 16)
SFRA500-4000-† 100 100–1,000 SFRA500-10000-† 16)

The food all-rounder – iglidur® A180

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA180-1000-† 16)
45 100–1,000 16)
SFRA180-4500-†
15 100–1,000 16)
SFRA180-1500-† 50 100–1,000 16)
SFRA180-5000-†
20 100–1,000 16)
SFRA180-2000-† 55 100–1,000 16)
SFRA180-5500-†
25 100–1,000 16)
SFRA180-2500-† 60 100–1,000 16)
SFRA180-6000-†
30 100–1,000 16)
SFRA180-3000-† 65 100–1,000 16)
SFRA180-6500-†
35 100–1,000 16)
SFRA180-3500-† 80 100–1,000 16)
SFRA180-8000-†
40 100–1,000 16)
SFRA180-4000-† 100 100–1,000 16)
SFRA180-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 627

 iglidur®
bar stock iglidur® round bars | Product range
"Food" material with high media resistance up to +90 °C – iglidur® A160

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA160-1000-†16)
45 100–1,000 16)
SFRA160-4500-†
15 100–1,000 16)
SFRA160-1500-† 50 100–1,000 16)
SFRA160-5000-†
20 100–1,000 SFRA160-2000-†16)
55 100–1,000 16)
SFRA160-5500-†
25 100–1,000 16)
SFRA160-2500-† 60 100–1,000 16)
SFRA160-6000-†
30 100–1,000 16)
SFRA160-3000-† 65 100–1,000 16)
SFRA160-6500-†
35 100–1,000 16)
SFRA160-3500-† 80 100–1,000 SFRA160-8000-†16)

40 100–1,000 16)
SFRA160-4000-† 100 100–1,000 SFRA160-10000-† 16)

For contact with drinking water – iglidur® UW160

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur® material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRUW160-1000-† 16)
45 100–1,000 16)
SFRUW160-4500-†
15 100–1,000 16)
SFRUW160-1500-† 50 100–1,000 16)
SFRUW160-5000-†
20 100–1,000 16)
SFRUW160-2000-† 55 100–1,000 16)
SFRUW160-5500-†
25 100–1,000 16)
SFRUW160-2500-† 60 100–1,000 16)
SFRUW160-6000-†
30 100–1,000 16)
SFRUW160-3000-† 65 100–1,000 16)
SFRUW160-6500-†
35 100–1,000 SFRUW160-3500-† 16)
80 100–1,000 16)
SFRUW160-8000-†
40 100–1,000 16)
SFRUW160-4000-† 100 100–1,000 16)
SFRUW160-10000-†

Available from stock

Produced to special order

628 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars | Product range bar stock
For the tobacco industry – iglidur® T220

Order key for round bars

Type Dimensions [mm]

16)
Length

iglidur® material
in mm from
100 to 1,000,

Bar stock

Length16)
graduated

Outer Ø

Inner Ø
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRT220-1000-† 16)
45 100–1,000 16)
SFRT220-4500-†
15 100–1,000 16)
SFRT220-1500-† 50 100–1,000 16)
SFRT220-5000-†
20 100–1,000 SFRT220-2000-† 16)
55 100–1,000 16)
SFRT220-5500-†
25 100–1,000 16)
SFRT220-2500-† 60 100–1,000 16)
SFRT220-6000-†
30 100–1,000 16)
SFRT220-3000-† 65 100–1,000 16)
SFRT220-6500-†
35 100–1,000 16)
SFRT220-3500-† 80 100–1,000 SFRT220-8000-†16)

40 100–1,000 16)
SFRT220-4000-† 100 100–1,000 SFRT220-10000-† 16)

Used to prevent electro-static charges – iglidur® F2

Order key for round bars

Type Dimensions [mm]

iglidur® material

16)
Length in mm
Bar stock

Length16)

from 100 to 1,000,

Outer Ø

Inner Ø
Round

graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRF2-1000-† 16)
45 100–1,000 16)
SFRF2-4500-†
15 100–1,000 16)
SFRF2-1500-† 50 100–1,000 16)
SFRF2-5000-†
20 100–1,000 16)
SFRF2-2000-† 55 100–1,000 16)
SFRF2-5500-†
25 100–1,000 16)
SFRF2-2500-† 60 100–1,000 16)
SFRF2-6000-†
30 100–1,000 SFRF2-3000-† 16)
65 100–1,000 16)
SFRF2-6500-†
35 100–1,000 16)
SFRF2-3500-† 80 100–1,000 16)
SFRF2-8000-†
40 100–1,000 16)
SFRF2-4000-† 100 100–1,000 16)
SFRF2-10000-†

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 629

 iglidur®
bar stock iglidur® round bars | Product range
Versatile and cost-effective – iglidur® J2

Order key for round bars

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Round
graduated in
100 mm steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ2-1000-†16)
45 100–1,000 16)
SFRJ2-4500-†
15 100–1,000 16)
SFRJ2-1500-† 50 100–1,000 16)
SFRJ2-5000-†
20 100–1,000 SFRJ2-2000-†16)
55 100–1,000 16)
SFRJ2-5500-†
25 100–1,000 16)
SFRJ2-2500-† 60 100–1,000 16)
SFRJ2-6000-†
30 100–1,000 SFRJ2-3000-†16)
65 100–1,000 16)
SFRJ2-6500-†
35 100–1,000 16)
SFRJ2-3500-† 80 100–1,000 16)
SFRJ2-8000-†
40 100–1,000 SFRJ2-4000-†16)
100 100–1,000 16)
SFRJ2-10000-†

Flame-retardant, according to DIN EN 45545 – iglidur® RW370

Order key for round bars

Type Dimensions [mm]

16)
Length
iglidur material

in mm from
100 to 1,000,
Bar stock

Length16)

graduated
Outer Ø

Inner Ø
®
Round

in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRRW370-1000-† 16)
45 100–1,000 16)
SFRRW370-4500-†
15 100–1,000 16)
SFRRW370-1500-† 50 100–1,000 16)
SFRRW370-5000-†
20 100–1,000 16)
SFRRW370-2000-† 55 100–1,000 16)
SFRRW370-5500-†
25 100–1,000 SFRRW370-2500-† 16)
60 100–1,000 16)
SFRRW370-6000-†
30 100–1,000 16)
SFRRW370-3000-† 65 100–1,000 16)
SFRRW370-6500-†
35 100–1,000 16)
SFRRW370-3500-† 80 100–1,000 16)
SFRRW370-8000-†
40 100–1,000 16)
SFRRW370-4000-† 100 100–1,000 16)
SFRRW370-10000-†

Available from stock

Produced to special order

630 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® round bars and tubes | Product range bar stock
The versatile endurance runner – iglidur® J

Order key for tubes

Type Dimensions [mm]

iglidur® material
16)
Length in mm

Bar stock

Length16)
from 100 to 1,000,

Outer Ø

Inner Ø
Tube
graduated in
100 mm steps
Dimensions [mm]
Inner Ø Inner diameter Outer Ø Outer diameter Length16) Part No.
tolerance tolerance
70 –2.0 / –6.5 110 +1.5 / +4.5 100–1,000 SFTJ-11070
70 –2.0 / –6.5 125 +1.5 / –2.0 100–1,000 SFTJ-12570
100 –2.0 / –6.5 150 +1.5 / +4.5 100–1,000 SFTJ-150100

igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
diameter is not available.

Service life calculation online www.igus.eu/barstock-expert 631

 iglidur®
bar stock iglidur® plates | Product range
The versatile endurance runner – iglidur® J

Order key for plates

Type Dimensions [mm]

Material thickness
iglidur® material
Bar stock

Length

Width
Plate
L

Dimensions Material thickness s Part No. Tolerances

(L x W) Material thickness Tolerance
500x240 2/4/6 SFPJ-†-500-240 2 +0.000 +0.200
500x300 10 / 15 / 20 / 25 / 30 / 40 SFPJ-†-500-300 4 +0.000 +0.250
500x500 2/4/6 SFPJ-†-500-500 6 +0.000 +0.300
500x610 10 / 15 / 20 / 25 / 30 / 40 SFPJ-†-500-610 10 +0.200 +0.900
1,000x500 2/4/6 SFPJ-†-1000-500 15 +0.300 +1,500
1,000x610 10 / 15 / 20 / 25 / 30 / 40 SFPJ-†-1000-610 20 +0.300 +1,500
1,000x1,000 2/4/6 SFPJ-†-1000-1000 25 +0.300 +1,500
30 +0.500 +2,500
40 +0.500 +2,500

632 Product finder online www.igus.eu/barstock-finder

 iglidur®
iglidur® plates | Product range bar stock
Extreme wear resistant in black – iglidur® JB

Order key for plates

Type Dimensions [mm]

Material thickness
iglidur® material
Bar stock

Length

Width
Plate
L

Dimensions Material thickness s Part No. Tolerances

(L x W) Material thickness Tolerance
500x300 10 / 25 SFPJB-†-500-300 10 +0.200 +0.900
500x610 10 / 25 SFPJB-†-500-610 25 +0.300 +1.500
1,000x610 10 / 25 SFPJB-†-1000-610

The FDA-compliant endurance runner at higher temperatures – iglidur® A350

Dimensions Material thickness s Part No. Tolerances

(L x W) Material thickness Tolerance
500x300 15 / 20 / 25 SFPA350-†-500-300 15 +0.300 +1.500
500x610 15 / 20 / 25 SFPA350-†-500-610 20 +0.300 +1.500
1,000x610 15 / 20 / 25 SFPA350-†-1000-610 25 +0.300 +1.500

Service life calculation online www.igus.eu/barstock-expert 633

iglidur® bar stock | Processing information
Processing information for iglidur® bar stock

General information for achieving good results changes caused by absorbed water, larger
when processing iglidur® bar stock: production tolerances are required for plastics
O Use tools made from high-speed steels (HSS) than for metal parts
and hard metal (HM) O To reduce any retrospective warping as a result
O Always ensure the tools are extremely sharp of machining stresses, if large material volumes
and in perfect condition are to be machined, interim tempering should
O In view of the far greater thermal expansion be used before the refined finishing stage
compared to metals and the dimensional

Sawing Turning Milling Drilling

HM with alternate teeth
Tool material HSS HSS HSS
or trapezoidal flat teeth
Clearance angle 5–30° 2–10° 2–30° 3–16°
Rake angle 0–15° 0–8° 0–15° 5–30°
Tooth pitch 2–14 mm – – –
Setting angle – 45–60° – –
Tip angle – – – 90–130°
Cutting speed max. 300 m/min. 100–500 m/min. 80–500 m/min. 20–200 m/min.
Feed rate – 0.05–0.5 mm/rpm 0.02–0.3 mm/rpm
Table: General processing information

Tempering
Interim tempering reduces inner tensions caused the tempering temperatures indicated below over
by the machining process and thus creates a period of 3 – 4 hours by slowly heating the
narrower tolerances. In the end, the optimum part from room temperature. Depending on the
values depend on the volume of material thickness of the part, this tempering temperature
machined, the machining parameters and the should be maintained for 1 hour per cm of wall
geometric design of the end product, and have thickness.
to be determined by tests. If the machined part cools too quickly, tension
As the plastic has low thermal conductivity, the can once again be induced in it. This is avoided
plastic bar stock has to be heated slowly. by using a slow cooling process with a maximum
Where possible, the entire bar stock should be reduction of +20 °C per hour until room tempe-
evenly heated. It is therefore important to achieve rature is reached.

Tempering temperature iglidur® materials

A180, A181, J, J200, J2, J3,
+120 °C
J4, R, UW160
+130 °C J260
+130 °C M250
+180 °C F2, P210, T220, W300
+200 °C A350, H1, J350
+220 °C X111)
111)
In the case of iglidur® X, the +220 °C per cm of
wall thickness must be maintained for 2 hours.

634 Product finder online www.igus.eu/barstock-finder

iglidur® bar stock | Online tools & speedicut
Special parts fast, machined to drawing

Find & compare semi-finished products

This material finder helps you find the right iglidur®
material for your project with a few clicks!
www.igus.eu/barstock-finder

Calculate service life of bar stocks

Quick calculation of the service life of your iglidur®
bar stock.
www.igus.eu/barstock-expert

speedicut – Special parts fast, machined to

drawing
speedicut is the machining process of iglidur®
bar stocks produced to your 3D model and
specifications.
Before submitting an online request for the
mechanical production of your desired geometric
design, you can use the material finder or the
service life calculation program to filter materials
and find the right one for your application.
If you would like our assistance in choosing the
right material with the optimum friction and wear
values, please do not hesitate to contact us.
We divide machining into two categories:
O Production of all custom geometric designs in
the form of plain bearings, sliding elements and
pads in line with your drawing and with the
standard tolerances for plastics.
O Production of iglidur® plain bearings and thrust
washers in custom dimensions in line with igus®
standard tolerances. You do not need to create
a drawing for this type of processing.

Speed: if required, we are able to produce small

quantities within a matter of days. If you need
prototypes for your urgent projects extremely
quickly, please contact us.
Depending on their complexity and precision,
our rapid delivery service can supply parts with a
delivery time of as little as 3 days.
www.igus.eu/speedicut

Service life calculation online www.igus.eu/barstock-expert 635

 iglidur®
bar stock My sketches

636 Product finder online www.igus.eu/barstock-finder

 ®
iglidur Tribo-Tape
Choice of 4 materials
Lubrication and maintenance-free
Wear-resistant
Easy to cut
Can be glued
Standard widths from stock
iglidur® Tribo-Tape | Advantages
Versatile: iglidur® Tribo-Tape

Material: iglidur® A160

iglidur® off the reel:
O Low coefficients of
friction
Tribo-Tape
O Wear resistance: ++ igus® Tribo-Tape is designed for lining areas of
O Up to +90 °C wear and where frequent maintenance is required,
Page 640 an example is for machine beds etc. At just 0.5
mm thick (0.62 mm including the adhesive back),
the space requirement is extremely low. The ease
of use (the tape can simply be cut using scissors)
and optional self-adhesive back open up almost
endless possibilities for the product's use.
Material: iglidur® B160 O Lubrication and maintenance-free
O Easy to cut
O For use in O For compact areas
visible areas O With or without self-adhesive back
O Wear resistance: ++++ O Standard width from stock
O Up to +90 °C O Individual desired widths in continuous range
Page 641 from 20-500 mm

Available from stock

Detailed information about delivery time online.

Operation temperatures:
iglidur® A160: –50 °C up to +90 °C
Material: iglidur® W160 iglidur® B160: –50 °C up to +90 °C
iglidur® W160: –50 °C up to +90 °C
O Antibacterial iglidur® V400: –50 °C up to +200 °C
O Wear resistance: +++ Differing temperatures with adhesive back
O Up to +90 °C (see product page)
Page 642
Product film
www.igus.eu/tape-film

Cutting service
Whether as a specially tailored
by-the-metre product or freely
Material: iglidur® V400 designed pre-cut parts: We
produce your desired product in desired width
O High media resistance from our iglidur® Tribo-Tape. Talk to us!
O Wear resistance: +++++ www.igus.eu/custom-tape
O Up to +200 °C
Page 643

638 Online tools and more information www.igus.eu/tribotape

 iglidur®
iglidur® Tribo-Tape | Technical data Tribo-Tape

Material properties
General properties Unit iglidur® iglidur® iglidur® iglidur® Testing
A160 B160 W160 V400 method
Density g/cm3 1.00 1.00 0.95 1.51
cream
Colour blue black white
white
Max. moisture absorption at +23 °C/50 % r.h. % weight 0.1 0.1 0.1 0.1 DIN 53495
Max. water absorption % weight 0.1 0.1 0.1 0.2
0.09– 0.13– 0.12– 0.15–
Coefficient of sliding friction, dynamic, against steel µ
0.19 0.20 0.20 0.20
Mechanical properties
Flexural modulus MPa 1,151 852 799 4,500 DIN 53457
Tensile strength at +20 °C MPa 19 14 14 95 DIN 53452
Shore-D hardness 60 59 58 74 DIN 53505
Physical and thermal properties
Max. long-term application temperature °C +90 +90 +90 +200
Max. short-term application temperature °C +100 +100 +100 +240
Min. application temperature °C –50 –50 –50 –50
Heat conductivity W/m · K 0.30 0.32 0.30 0.24 ASTM C 177
Coefficient of thermal expansion (at +23 °C) K–1 · 10–5 11 11 11 3 DIN 53752
Electrical properties
Specific contact resistance Ωcm > 1012 > 1012 > 1012 > 1012 DIN IEC 93
12 12 12 12
Surface resistance Ω > 10 > 10 > 10 > 10 DIN 53482
Table 01: Material properties table

Chemical resistance (at +20 °C)

Chemical resistance iglidur ® A160 iglidur ® B160 iglidur ® W160 iglidur ® V400
Alcohol + + + +
Hydrocarbons + + + +
Greases, oils without additives + + + +
Fuels + to 0 + to 0 + to 0 +
Diluted acids + + + +
Strong acids + + + +
Diluted alkalines + + + +
Strong alkalines + + + –
Radiation Resistance [Gy] up to 1 · 105 1 · 105 1 · 105 2 · 104
+ resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]

3D-CAD files, prices and delivery time online www.igus.eu/tribotape 639

 iglidur®
Tribo-Tape iglidur® Tribo-Tape | Product range
FDA-compliant – iglidur® A160

Order key

Type Dimensions [mm] Options

G=
with adhesive

iglidur® material

Adhesive back
back

Thickness

Width
Tape
The low-cost iglidur® A160 tape has very high Tribo-Tape from iglidur® A160 with adhesive back
wear resistance compared to similar, thin plastic Temperature –40 °C up to +90 °C
films.

Dimensions [mm]
Thickness Thickness Width Width tolerance Part No. Part No.
tolerance with adhesive back112)
0.5 ± 0.1 20 ± 0.5 A160-T-005-0020 A160-T-005-0020-G
0.5 ± 0.1 50 ± 0.5 A160-T-005-0050 A160-T-005-0050-G
0.5 ± 0.1 100 ± 0.5 A160-T-005-0100 A160-T-005-0100-G
0.5 ± 0.1 500 ± 1.0 A160-T-005-0500 A160-T-005-0500-G
1.0 ± 0.1 500 ± 1.0 A160-T-010-0500 A160-T-010-0500-G
112)
Adhesive thickness tolerance: ± 0.015 mm

Individual widths upon request Cutting service

Continuously from 20–500 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape

4
Wear/Weight decrease

2
PTFE-
iglidur® A160
[mg/km]

1 fibre glass

0
Linear wear against stainless steel pin (1.4305)
F = 10 N, v = 9,600 mm/min

iglidur® A160 material complies with EC Directive 10/2011 EC and also with FDA
(Food and Drug Administration) specifications for repeated contact with food.

640 Online tools and more information www.igus.eu/tribotape

 iglidur®
iglidur® Tribo-Tape | Product range Tribo-Tape
For use in visible areas – iglidur® B160

Order key

Type Dimensions [mm] Options

G=
with adhesive

iglidur® material

Adhesive back
back

Thickness

Width
Tape
Especially where the iglidur® Tribo-Tape is a visible Tribo-Tape from iglidur® B160 with adhesive back
part, the new black option now offers even more Temperature –40 °C up to +90 °C
creative freedom. Furthermore the wear resistance
compared to variants made of iglidur® A160 has
been improved once again.

Dimensions [mm]
Thickness Thickness Width Width tolerance Part No. Part No.
tolerance with adhesive back112)
0.5 ± 0.1 20 ± 0.5 B160-T-005-0020 B160-T-005-0020-G
0.5 ± 0.1 50 ± 0.5 B160-T-005-0050 B160-T-005-0050-G
0.5 ± 0.1 100 ± 0.5 B160-T-005-0100 B160-T-005-0100-G
0.5 ± 0.1 500 ± 1.0 B160-T-005-0500 B160-T-005-0500-G
112)
Adhesive thickness tolerance: ± 0.015 mm

Individual widths upon request Cutting service

Continuously from 20–500 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape

4
Wear/Weight decrease

2
PTFE-
iglidur® B160
[mg/km]

1 fibre glass

0
Linear wear against stainless steel pin (1.4305)
F = 10 N, v = 9,600 mm/min

3D-CAD files, prices and delivery time online www.igus.eu/tribotape 641

 iglidur®
Tribo-Tape iglidur® Tribo-Tape | Product range
Antibacterial – iglidur® W160

Order key

Type Dimensions [mm] Options

G=
with

iglidur® material

Adhesive back
adhesive
back

Thickness

Width
Tape
With its white colour and UV-stabilised additives, the Tribo-Tape from iglidur® W160 with adhesive back
iglidur® W160 Tribo-Tape offers even more design Temperature –40 °C up to +90 °C
freedom as a visual part. The anti-bacterial feature
also offers advantages in areas like medical
technology, where hygiene is critical.

Dimensions [mm]
Thickness Thickness Width Width tolerance Part No. Part No.
tolerance with adhesive back112)
0.5 ± 0.1 20 ± 0.5 W160-T-005-0020 W160-T-005-0020-G
0.5 ± 0.1 50 ± 0.5 W160-T-005-0050 W160-T-005-0050-G
0.5 ± 0.1 100 ± 0.5 W160-T-005-0100 W160-T-005-0100-G
0.5 ± 0.1 500 ± 1.0 W160-T-005-0500 W160-T-005-0500-G
112)
Adhesive thickness tolerance: ± 0.015 mm

Individual widths upon request Cutting service

Continuously from 20–500 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape

4
Wear/Weight decrease

2
PTFE-
iglidur® W160
[mg/km]

1 fibre glass

0
Linear wear against stainless steel pin (1.4305)
F = 10 N, v= 9600 mm/min

642 Online tools and more information www.igus.eu/tribotape

 iglidur®
iglidur® Tribo-Tape | Product range Tribo-Tape
High media resistance – iglidur® V400

Order key

Type Dimensions [mm] Options

G=
with adhesive

iglidur® material

Adhesive back
back

Thickness

Width
Tape
iglidur® V400 tape is not only extremely wear Tribo-Tape from iglidur® V400 with adhesive back
resistant but also extremely media and temperature Temperature –40 °C up to +200 °C
resistant. In fact, it has been proven in tests to be
up to 10 times more wear resistant than special
products for machine beds.

Dimensions [mm]
Thickness Thickness Width Width tolerance Part No. Part No.
tolerance with adhesive back112)
0.5 ± 0.1 120 ± 1.0 V400-T-005-0120 V400-T-005-0120-G
112)
Adhesive thickness tolerance: ± 0.015 mm

Individual widths upon request Cutting service

Continuously up to 120 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape

30

25

20
Wear/Weight decrease

15

10
PTFE-bronze
iglidur® V400
[mg/km]

5 compound

0
Linear wear against stainless steel pin (1.4305)
F = 35 N, v = 0.5 m/min

3D-CAD files, prices and delivery time online www.igus.eu/tribotape 643

.