Scribd
Upload
7 views1 page

Step For Router0

The document configures OSPF routing on a router by setting IP addresses on interfaces, enabling the interfaces, and defining OSPF networks.

Uploaded by

Siva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7 views1 page

Step For Router0

The document configures OSPF routing on a router by setting IP addresses on interfaces, enabling the interfaces, and defining OSPF networks.

Uploaded by

Siva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Continue with configuration dialog?

[yes/no]: no

Press RETURN to get started!

Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#int se2/0
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down


Router(config-if)#
Router(config-if)#router ospf 1
Router(config-router)#network 192.168.1.0 0.0.0.255 area 0
Router(config-router)#network 192.168.2.0 0.0.0.255 area 0
Router(config-router)#network 192.168.3.0 0.0.0.255 area 0
Router(config-router)# exit

You might also like