SMA Energy Meter Min

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SMA ENERGY METER

EMETER-10

Easy to Use Flexible High Performance


• Quick plug and play installation • Space-saving DIN rail mounting • Suitable for universal use regard- • Fast three-phase, bidirectional reading
• Graphic visualization of current in household distribution thanks to less of existing energy meter of measured values for effective ener-
measured values in Sunny Portal compact enclosure gy management
• Flexible use in applications >63 A • Fast Speedwire communication
thanks to external current transfor-
mers

SMA ENERGY METER


Universal recording of measured values for intelligent energy management
The powerful measurement solution for intelligent energy management within the SMA Smart Home: The SMA Energy Meter takes
phase-accurate and balanced electrical measured values, such as a grid feed-in and purchased electricity meter, and communi-
cates these values via Speedwire. Thanks to its ability to quickly acquire bidirectional measured values, the SMA Energy Meter
is the ideal supplier of data for intelligent energy management within the SMA Smart Home. All PV generation data, purchased
electricity and grid feed-in can be transmitted via standard Ethernet cable to the Sunny Home Manager, for example, or, in the
future, to the Sunny Boy Smart Energy. This, in turn, facilitates optimal energy monitoring, effective load and battery management
and reliable active power limitation at the grid feed-in point while taking self-consumption into account.

*
Can also be used in single-phase systems.
Storage application example

Technical data SMA Energy Meter

Communication
Fieldbus Speedwire, 10/100 Mbit/s
Max. radio range
Speedwire / fast Ethernet 100 m (between two devices)
Inputs (voltage and current)
Nominal voltage 230 V / 400 V
Frequency 50 Hz, 60 Hz / ±5%
Nominal current / limiting current per line conductor 5 A / 63 A (>63 A can be connected via external current transformers)
Start-up current <25 mA
Connection cross-section 1.0 mm² to 25 mm²
Torque for screw terminals 2.0 Nm
Ambient conditions in operation
Ambient temperature –25°C to +40 °C (–13 °F ... +104 °F)

All products and services described as well as technical data are subject to change, even for reasons of country-specific deviations, at any time without notice. SMA assumes no liability for errors or omissions. For current information, see www.SMA-Solar.com
Storage temperature range –25 °C ... +70 ° C (–13 °F ... +158 ºF)
Protection class (according to IEC 62103) II
Degree of protection (according to IEC 60529) IP2X
Max. permissible value for relative humidity (non-condensing) 5% – 95%
General data
Dimensions (W / H / D) 88 / 70 / 65 mm
Individual units (3.46 / 2.76 / 2.56 inch)
Weight 4
Mounting location 0.3 kg (0.66 lb)
Mounting type Switch or meter cabinet
Status display Top-hat rail mounting
Self-consumption 2 LEDs
Measurement accuracy < 2 W
Sampling frequency 1%
Languages of the manual < 1 Hz
German, English, Italian, French, Spanish, Dutch, Portuguese, Greek
Features
Warranty 2 years
Certificates and permits (more available on request) www.SMA-Solar.com ENERGYMETER-DDE140922 SMA and Sunny WebBox are registered trademarks of SMA Solar Technology AG. Printed on FSC paper.

Last updated: February 2014


● Standard features ○ Optional features — Not available / Data at nominal conditions
Type designation EMETER-10

www.SMA.de SMA Solar Technology

You might also like