PROPERTIES

INPUT DATA
Shape Member Type Length Rotate (deg)
12ZS3.25x105 Beam 10 ft 0
Material Type
Cold Formed Steel

MATERIAL PROPERTIES
Material E G Nu Density Fy
A653 SS Gr33 29500 ksi 11346 ksi 0.3 0.49 k/ft³ 33 ksi

SHAPE PROPERTIES
A D t B d R IZZ IYY
2.09 in2 12 in 0.105 in 3.25 in 0.99 in 0.1875 in 43.7 in4 4.67 in4
Gamma IZY J Cw Ix2 θ ro Iy2
0.872665 10.2 in4 0.0077 in4 123 in6 2.18 in4 1.331686 4.8089 in 46.2 in4
rmin
1.02 in

DESIGN PROPERTIES
Lb out Lb in Ltorque Lcomp top Lcomp bot Kin R Cb
10 ft 10 ft 10 ft 10 ft 10 ft 1 -1 Autocalc

LOADS

POINT LOADS

Load Category Magnitude Location Direction

DL 1 50%

LOAD COMBINATIONS

IBC 2018
Load combinations include self weight.

Strength

Equation Code

1. 1.4 DL IBC 16-1

v19.0.2 Page 1 of 12
 ASD

Equation Code

1. 1 DL IBC 16-8

DIAGRAMS
All diagrams display the governing load combination.

REACTIONS

Support 1 (@ 0 ft) Horizontal (k) Vertical (k) Moment (k-ft)

Max 0 0 0
(IBC 16-1) (IBC 16-8 POST) (IBC 16-1)

Min 0 -0.750 0

v19.0.2 (IBC 16-1) (IBC 16-1) (IBC 16-1) Page 2 of 12

 Support 2 (@ 10 ft) Horizontal (k) Vertical (k) Moment (k-ft)

Max 0 0 0
(IBC 16-1) (IBC 16-8 POST) (IBC 16-1)

Min 0 -0.750 0
(IBC 16-1) (IBC 16-1) (IBC 16-1)

CALCULATIONS
AISI S100-16: LRFD Code Check
Limit State Required Available Unity Check Result

Applied Loading - Bending/Axial - - - -

Applied Loading - Shear - - - -

Axial Tension Analysis 0k 62.073 k - -

Axial Compression Analysis 0k 21.254 k - -

Flexural Analysis 3.624 k-ft 15.884 k-ft - -

Shear Analysis 0.75 k 13.717 k 0.05 Pass

Bending & Axial Interaction Check (UC Bending - - 0.23 Pass

Max)
Deflection Check - - 0.06 Pass

Applied Loading - Bending/Axial

Governing bending and axial location -

Extreme top fiber positive bending stress -

about y-axis

Extreme bottom fiber positive bending stress -

about y-axis

Extreme top fiber positive bending stress -

about z-axis

Extreme bottom fiber positive bending stress -

about z-axis

Compressive Stress from bending about z- -

axis

Tensile stress from bending about z-axis -

Tensile stress from bending about y-axis -

Compressive axial force due to factored loads -

Elastic shape modulus about local y-axis -

(weak)

Flexural force due to factored loads (with -

respect to y-axis)

v19.0.2 Page 3 of 12
 Elastic shape modulus about local z-axis -
(strong)

Flexural force due to factored loads (with -

respect to z-axis)

Applied Loading - Shear

Governing shear location per governing axis -

Shear stress in the y-axis -

Shear stress in the z-axis -

Effective shear area in local y-axis for -

required strength

Shear force due to factored loads, y -

Effective shear area in local z-axis for -

required strength

Shear force due to factored loads, z -

Axial Tension Analysis

CHECK ALLOWABLE TENSILE STRENGTH

Resistance factor in tension -

Specified minimum yield stress -

Gross cross-sectional area of member -

Tensile resistance due to yielding (Eq. D2-1)

Factored tensile resistance (Sec. B3.2.2)

Tensile axial force due to factored loads -

Axial Compression Analysis

FLEXURAL BUCKLING STRESS

Modulus of elasticity -

Effective length factor for the flexural -

buckling about the y-axis

Distance between points which brace the -

member against flexural buckling about the y-
axis
Effective length factor for the flexural -
buckling about the z-axis

v19.0.2 Page 4 of 12
 Distance between points which brace the -
member against flexural buckling about the z-
axis
Radius of minimum gyration -

Effective slenderness ratio about the local y- -

axis (weak)

Effective slenderness ratio about the local z- -

axis (strong)

- -

Critical elastic (flexural) buckling stress (Eq. E2.1-1)

CHECK FLEXURAL-TORSIONAL BUCKLING STRESS

Gross cross-sectional area of member -

Modulus of elasticity -

Shear modulus of elasticity -

Torsional constant -

Warping constant -

Effective length factor for twisting -

Unbraced length of compression member for -

twisting

Radius of minimum gyration -

Polar radius of gyration of cross-section (Eq. E2.2-4)

about shear center

Local x coordinate of shear center with -

respect to the centroid

Coefficient (Eq. E2.2-3)

Torsional buckling stress (Eq. E2.2-5)

Critical lateral-torsional buckling stress (Sec. E2)

YIELDING AND BUCKLING COMPRESSIVE STRESS

Specified minimum yield stress -

Critical lateral-torsional buckling stress (Sec. E2.3)

Slenderness factor (Eq. E2-4)

v19.0.2 Page 5 of 12
 Compressive stress (Eq. E2-2)

CHECK ALLOWABLE COMPRESSIVE STRESS

Gross cross-sectional area of member -

Compressive stress (Sec. E2)

Axial resistance for overall buckling (Eq. E2-1)

LOCAL BUCKLING INTERACTING WITH YIELDING AND GLOBAL BUCKLING

Effective area at stress Fn (App. 1)

Compressive stress (Sec. E2)

Axial resistance for overall buckling (Eq. E2-1)

Axial resistance for local buckling (Eq. E3.1-1)

Axial resistance -

DISTORTIONAL BUCKLING
Gross cross-sectional area of member -

Specified minimum yield stress -

Angle between an element and its edge -

stiffener

Mid-Line width of flange -

Mid-Line depth of lip -

Out-to-out depth of web -

Base steel thickness of element -

Poisson's Ratio -

Out-to-out width of flange -

Overall depth of lip -

Critical unbraced length of buckling (C-2.3.1.3-3)

Distance between discrete restraints that -

restrict buckling

v19.0.2 Page 6 of 12
 Coefficient that accounts for benefit of an (C-2.3.1.3-2)
unbraced length, Lm, shorter than Lcr

Plate buckling coefficient (C-2.3.1.3-4)

Elastic distortional buckling stress (C-2.3.1.3-1)

Distortional buckling force (Eq. 2.3.1.3-1)

Member axial yield strength (Eq. E4.1-4)

Slenderness factor of distortional buckling (Eq. E4.1-3)

Axial resistance for distortional buckling (Eq. E4.1-2)

Axial resistance -

Resistance factor in compression -

Factored axial resistance (Sec. B3.2.2)

Compressive axial force due to factored loads -

Flexural Analysis

YIELDING AND GLOBAL LATERAL-TORSIONAL BUCKLING

Elastic section modulus of full unreduced (Program Calculated)
section relative to extreme fiber in first
yielding
Elastic section modulus of full unreduced (Program Calculated)
section relative to extreme compression fiber

Gross cross-sectional area of member -

Radius of gyration about the local z-axis -

(strong)

Radius of gyration about the local y-axis -

(weak)

Local x coordinate of shear center with -

respect to the centroid

Modulus of elasticity -

Shear modulus of elasticity -

Torsional constant -

Warping constant -

Effective length factor for the flexural -

buckling about the y-axis

v19.0.2 Page 7 of 12
 Effective length factor for twisting -

Distance between points which brace the -

member against flexural buckling about the y-
axis
Unbraced length of compression member for -
twisting

Lateral-torsional buckling modification factor -

Polar radius of gyration of cross-section (Eq. E2.2-4)

about shear center

Elastic flexural buckling stress (Eq. F2.1.1-4)

Torsional buckling stress (Eq. F2.1.1-5)

Critical elastic lateral-torsional buckling stress (Eq. F2.1.3-1)

Global flexural stress (Eq. F2.1-4)

Member yield moment (Eq. F2.1-2)

Flexural resistance for yielding and global (Eq. F2.1-1)

(lateral-torsional) buckling

LOCAL BUCKLING INTERACTING WITH YIELDING AND GLOBAL BUCKLING

Specified minimum yield stress -

Global flexural stress (Sec. F2)

Effective section modulus calculated at (Program Calculated)

extreme fiber tension stress of Fy

Reduction factor (Eq. H4-1)

Effective section modulus (Program Calculated)

Flexural resistance for local buckling (Eq. F3.1-1 & Eq. H4-1)

DISTORTIONAL BUCKLING
Gross cross-sectional area of member -

Elastic section modulus of full unreduced (Program Calculated)

section relative to extreme fiber in first
yielding
Specified minimum yield stress -

Shear modulus of elasticity -

Poisson's Ratio -

v19.0.2 Page 8 of 12
 Angle between an element and its edge -
stiffener

Mid-Line width of flange -

Mid-Line depth of lip -

Out-to-out depth of web -

Base steel thickness of element -

x distance from centroid of flange to shear (Table 2.3.1.3-1)

center of flange

x distance from centroid of flange to flange/ (Table 2.3.1.3-1)

web junction

x-axis moment of inertia of the flange (Table 2.3.1.3-1)

y-axis moment of inertia of the flange (Table 2.3.1.3-1)

Product of inertia of flange about major and (Table 2.3.1.3-1)

minor centroidal axes

Torsional warping constant of flange (Table 2.3.1.3-1)

y distance from centroid of flange to shear (Table 2.3.1.3-1)

center of flange

Saint-Venant torsion constant of flange (Table 2.3.1.3-1)

Stress gradient in web -

Critical unbraced length of distortional (Eq. 2.3.3.3-4)

buckling

Distance between discrete restraints that -

restrict buckling

Minimum of Lcrd and Lm -

Elastic rotational stiffness provided by flange (Eq. 2.3.1.3-3)

to flange/web juncture

Elastic rotational stiffness provided by web to (Eq. 2.3.3.3-5)

flange/web juncture

Geometric rotational stiffness demanded by (Eq. 2.3.1.3-5)

flange from flange/web juncture

Geometric rotational stiffness demanded by (Eq. 2.3.3.3-6)

the web from the flange/web juncture

Rotational stiffness -

Value accounting for moment gradient (Eq. 2.3.3.3-3)

v19.0.2 Page 9 of 12
 Elastic distortional buckling stress (Eq. 2.3.3.3-2)

Member yield moment (Eq. F4.1-4)

Distortional buckling moment (Eq. 2.3.3.3-1)

Slenderness factor of distortional buckling (Eq. F4.1-3)

Flexural resistance for distortional moment (Eq. F4.1-2)

Flexural resistance -

Resistance factor in flexure -

Factored flexural resistance for globally (Sec. H2)

braced member

Factored flexural resistance (strong axis) (Sec. B3.2.2)

Flexural force due to factored loads (with -

respect to z-axis)

Shear Analysis
Modulus of elasticity -

Specified minimum yield stress -

Poisson's Ratio -

Depth of flat portion of element in shear -

Area of element in shear -

- -

Elastic shear buckling stress (Eq. G2.3-2)

Shear buckling force (Eq. G2.3-1)

Yield shear force of cross-section (Eq. G2.1-5)

Slenderness factor (Eq. G2.1-4)

Shear resistance (Eq. G2.1-3a)

Resistance factor in shear -

v19.0.2 Page 10 of 12
 Factored shear resistance (Sec. B3.2.2)

Shear force due to factored loads, y (see -

Applied Loading - Shear + Torsion)

Shear unity check -

Bending & Axial Interaction Check (UC Bending Max)

COMBINED BENDING AND SHEAR

Resistance factor in flexure -

Resistance factor in flexure -

Resistance factor in shear -

Resistance factor in shear -

Flexural force due to factored loads (with -

respect to y-axis)

Flexural force due to factored loads (with -

respect to z-axis)

Shear force due to factored loads, z (see -

Applied Loading - Shear + Torsion)

Shear force due to factored loads, y (see -

Applied Loading - Shear + Torsion)

Factored flexural resistance for globally -

braced member

Factored flexural resistance for globally -

braced member

Factored shear resistance -

Factored shear resistance -

- (Eq. H2-1)

COMBINED AXIAL LOAD AND BENDING

Flexural force due to factored loads (with -
respect to y-axis)

Factored flexural resistance (weak axis) (Sec. B3.2)

Flexural force due to factored loads (with -

respect to z-axis)

Factored flexural resistance (strong axis) (Sec. B3.2)

Compressive axial force due to factored loads -

v19.0.2 Page 11 of 12
 Factored axial resistance (Sec. B3.2)

- (Eq. H1.2-1)

Deflection Check
DL LL DL + LL

Deflection 0.032 in 0 in 0.032 in

Location 5 ft - 5 ft

L/Δ Ratio 3702.9 - 3702.9

L/Δ Limit (user input) 240 360 240

Unity Check 0.06 - 0.06

v19.0.2 Page 12 of 12