HCIA Datacom - 2021

Marks 53/78
Grade 68 out of 100

Question 1
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following frequency bands are supported by IEEE 802.11n? (multiple choice)
Select one or more:
a. 2.4 GHz
b. 6 GHz
c. 5 GHz
d. 2.5 GHz

Question 2
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following parts compose SNMP?

Select one or more:
a. Managed object
b. Agent Process
c. Management information base (MIB)
d. NMS

Question 3
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text
Refer to the following display ip routing-table command output on the router R1. Which of the
following statements are true? (multiple choice)

Select one or more:

a. The next hop of the route from R1 to 10.0.0.1 is 10.0.21.2
b. The next hop of the route from R1 to 10.0.0.1 is 10.0.12.2
c. The next hop of the route from R1 to 10.0.2.2 is 10.0.12.2
d. The next hop of the route from R1 to 10.0.2.2 is 10.0.21.2

Question 4
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following operations are mandatory to restore the factory default settings of an
AR2200 router? (Multiple Choice)
Select one or more:
a. Restarting the AR2200 router
b. Clearing the current configuration
c. Resetting saved configurations
d. Specifying the configuration file for next startup

Question 5
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following statements about VLAN design and planning on campus networks are true?
(multiple choice)
Select one or more:
a. Preferentially assign VLAN based on ports. This is the most commonly used method for VLAN
assignment.
b. Allocate consecutive VLAN IDs to ensure proper use of VLAN resources
c. Preferentially assign VLANs on MAC addresses. This is the most commonly used method for
VLAN assignment
d. Reserve a specific number of VLANs for future use

Question 6
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Assume that there are four subnets: 10.24.0.0/24, 10.24.1.0/24, 10.24.2.0/24 and 10.24.3.0/24.
Which of the following routes can be used to forward traffic to the four subnets? (multiple choice)
Select one or more:
a. 10.24.0.0/22
b. 0.0.0.0/0
c. 10.24.1.0/23
d. 10.24.0.0/21

Question 7

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

In STP, which of the following items may affect the selection of the root switch? (Multiple Choice)
Select one or more:
a. Switch MAC address
b. Switch interface bandwidth
c. Switch IP address
d. Switch priority
e. Switch port ID

Question 8

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Refer to the following display interface command output on a device. Which of the following
statements are true? (multiple choice)

Select one or more:

a. The IP address of the interface is 10.0.12.2/24
b. The MTU of the interface is 1000 bytes
c. The MAC address of the interface is 00e0-fc22-4fff
d. The working rate of the interface is I Gibit/s
Question 9

Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On the following network shown in the figure, SWA, SWB, and SWC run STP. G0/0/2 on SWA is
disabled from sending configuration BPDUs and G0/0/1 on SWC becomes the root port through re-
convergence. Which of the following statements about this process are true? (multiple choice)

Select one or more:

a. SWB sends TCN BPDUs to SWA
b. SWC sends TCN BPDUs to SWB
c. SWB sends configuration BPDUs with the TCA bit set to 1 to SWC
d. SWA sends configuration BPDUs with the TC bit set to 1

Question 10

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Refer to the following display interface command output on a device. Which of the following
statements are true? (multiple choice)
no.40
Select one or more:
a. The MAC address of the interface is 00e0-fc22-4fff
b. The working rate of the interface is 1 Gbit/s
c. The MTU of the interface is 1000 bytes
d. The IP address of the interface is 10.0.12.2/24

Question 11

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text
Which of the following statements are true about the default route? (multiple choice)
Select one or more:
a. If the destination address of a packet does not match any entry in the routing table, the
packet is forwarded through the default route.
b. In a routing table, the route to 0.0.0.0(with mask being 0.0.0.0) is the default route
c. The default route can only be manually configured by the administrator
d. The routing table of any router must contain the default route

Question 12
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following statements are used to correctly describe the Network Functions
Virtualization (NFV) architecture? (multiple choice)
Select one or more:
a. The NFV Orchestrator (NFV0) is responsible for service orchestration
b. The virtualized Infrastructure manager (VIM) is responsible for managing the virtualized
infrastructure
c. Management and Orchestration (MANO) consists of the NFVO, VNFM, and VIM
d. The Virtualized Network Function manager (VNFM) is responsible for lifecycle management of
VNFs

Question 13
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following statements are true about the dynamic MAC address table? (multiple
choice)
Select one or more:
a. After a device is rest, an interface card is hot swapped, or an interface card is reset, the saved
entries on the device or interface card are not lost
b. After a device is reset, an interface card is hot swapped, or an interface card is reset, dynamic
MAC address entries on the device or interface card are lost.
c. Dynamic MAC address entries are obtained by learning the source MAC addresses of packets
received by an interface, and can be aged out
d. You can obtain the number of users communicating on the interface by checking the number
of specified dynamic MAC address entries

Question 14
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text
Which of the following network are LANs? (Multiple Choice)
Select one or more:
a. Home network
b. Internet
c. Office network of a company
d. Broadband MAN

Question 15
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following methods can be used to assign service VLANs during campus network
planning? (multiple choice)
Select one or more:
a. VLAN assignment by personnel structure
b. VLAN assignment by geographic area
c. VLAN assignment by service type
d. VLAN assignment by logical area

Question 16
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following technologies can allow a host with IP address 10.0.0.1 to access the
internet? (Multiple Choice)
Select one or more:
a. NAT
b. Route import
c. Dynamic route
d. Static route

Question 17
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following fields in an IPv4 header are related to fragmentation? (multiple choice)
Select one or more:
a. TTL
b. Fragment offset
c. Flags
d. Identification
Question 18

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Refer to the following network topology and configuration of SWA. Which of the following
statements are true? (Multiple Choice)
no.37
Select one or more:
a. Host A and Host B can ping host
b. Data frames on the two links do not carry VLAN tags
c. The PVID of G0/0/1 on the switch is 20
d. Host A and Host B cannot ping each other

Question 19

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following statements about encapsulation and decapsulation are true? (multiple
choice)
Select one or more:
a. Encapsulation and decapsulation can locate network faults
b. Encapsulation and decapsulation shorten the packet length
c. Encapsulation and decapsulation participate in achieving different network protocol functions
d. Encapsulation and decapsulation can implement network communication

Question 20

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following fields are included in an MPLS header? (Multiple Choice)
Select one or more:
a. Exp
b. Label
c. TTL
d. ToS

Question 21

Incorrect
Mark 0 out of 1
Not flaggedFlag question
Question text

Which of the following methods can be used to add Aps on an AC? (multiple choice)
Select one or more:
a. Manually confirm APs in the list of unauthorized APs
b. Configure the AC to automatically discover Aps
c. Import APs when they are offline
d. Add APs when they are online

Question 22

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Assuming that all routers in the following figure are running OSPF, which routers are ABRs?
(multiple choice)
no.15mc
Select one or more:
a. Router D
b. Router A
c. Router C
d. Router B

Question 23

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

On the network shown in the following figure, it is required that Router A reject OSPF and ICMP
packets received on G0/0/1. Which of the following configurations meet this requirement? (multiple
choice)

Select one or more:

a. acl number 3000
rule 5 deny ospf
rule 10 deny icmp
#
interface GigabitEthernet 0/0/1
traffic-filter inbound acl 3000
#
 b. acl number 2000
rule 5 deny 89
rule 10 deny 1
#
interface GigabitEthernet 0/0/1
traffic-filter inbound acl 2000
#
c. acl number 3000
rule 5 deny 89
rule 10 deny icmp
#
interface GigabitEthernet 0/0/1
traffic-filter inbound acl 3000
#
d. acl number 3000
rule 5 deny 89
rule 10 deny 1
#
interface GigabitEthernet 0/0/1
traffic-filter inbound acl 3000
#

Question 24
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

An ACL rule is as follows. Which of the following IP addresses can be matched by the permit rule?
(Multiple Choice)
no.35mc
Select one or more:
a. 10.0.6.7
b. 10.0.4.5
c. 10.0.2.1
d. 10.0.5.6

Question 25
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following WLAN security policies support open link authentication? (Multiple Choice)
Select one or more:
a. WPA2-802.1X
b. WPA2-PSK
c. WEP
d. WPA
Question 26

Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following network types are supported by OSPF? (Multiple Choice)
Select one or more:
a. Point-to-point(P2P)
b. NBMA
c. Broadcast
d. Point-to-Multipoint (P2MP)

Question 27

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Link-aggregation is a common technique in enterprise network. Which of the following description

is the advantages of link aggregation? (multiple choice)

Select one or more:

a. Facilitates data copy for analysis
b. Improves network reliability
c. Implements load balancing
d. Improves link bandwidth

Question 28

Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

An administrator wants to update the VRP software version on a Huawei router. Which of the
following methods are available? (multiple choice)
Select one or more:
a. The administrator configures a Huawei router as a TFTP client and transmits the VRP software
through TFTP
b. The administrator configures a Huawei router as an FTP server and transmits the VRP
software through FTP
c. The administrator configures a Huawei router as a TFTP server and transmits the VRP software
through TFTP
d. The Administrator configures a Huawei router as an FTP client and transmits the VRP software
through FTP
Question 29

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On Huawei VRP platform, which of the following can be used to invoke the history command saved
by the command line interface? (Multiple Choice)
Select one or more:
a. Upper cursor key
b. Ctrl+P
c. Left cursor key
d. Ctrl+U

Question 30

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following are not main functions of routers? (Multiple Choice)
Select one or more:
a. Routers forward data packets based on source IP addresses
b. Routers forward data packets according to Routing tables
c. Routers learn routes from multiple routing protocols and add them to the routing table
d. Routers enable devices on the same network segment to communicate with each other

Question 31

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following are the Stable state of OSPF neighbor relationship? (multiple choice)
Select one or more:
a. Attempt
b. 2-way
c. Down
d. Full

Question 32

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text
On the switching network shown in the figure, all switches run STP and other configurations of the
switches retain factory settings. When the network topology is stable, which of the following
statements are true? (multiple choice)

Select one or more:

a. G0/0/1 and G0/0/2 on SWC are in forwarding state
b. SWA is the root bridge on the network
c. SWB is the root bridge on the network
d. G0/0/1 and G0/0/3 on SWB are in forwarding state

Question 33
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following MAC addresses cannot be used as the MAC addresses of host network
adapters? (multiple choice)
Select one or more:
a. 00-02-03-04-05-06
b. 02-03-04-05-06-07
c. 01-02-03-04-05-06
d. 03-04-05-06-07-08

Question 34
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following protocols are used by PPP protocol (multiple choice)
Select one or more:
a. NCP
b. Authentication protocol
c. LCP
 d. PPPoE

Question 35
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

14. Which of the following are not open APIs of Huawei network devices? (multiple choice)
Select one or more:
a. XML
b. NETCONF
c. JSON
d. RESTCONF

Question 36
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following command line views exit on the Versatile Routing Platform (VRP)? (multiple
choice)
Select one or more:
a. System view
b. User view
c. Protocol view
d. Interface view

Question 37
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On the network shown in the figure, when planning traffic, the network administrator requires that
the data packets sent from host A to host B pass through G0/0/3 on the router and the packets
sent from host B to Host A pass through G0/0/4 on the router. Which of the following commands
can be used to meet this requirement? (multiple choice)

Select one or more:

 a. Router A: ip route static 0.0.0.0 0.0.0.0 11.0.12.2
Router B: ip route static 0.0.0.0 0.0.0.0 11.0.12.5
b. Router A: ip route static 10.0.12.5 255.255.255.255 11.0.12.2
Router B: ip route static 10.0.12.1 255.255.255.255 11.0.12.5
c. Router A: ip route static 10.0.12.5 255.255.255.255 11.0.12.6
Router B: ip route static 10.0.12.1 255.255.255.255 11.0.12.1
d. Router A: ip route static 0.0.0.0 0.0.0.0 11.0.12.6
Router B: ip route static 0.0.0.0 0.0.0.0 11.0.12.1

Question 38
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

As shown in the figure, Router A has the following configurations. Which of the following
statements are true? (Multiple Choice)
no.33
Select one or more:
a. If G0/0/2 goes down, the next hop of the route from Router A to 10.0.2.2 is changed to
10.0.12.2
b. In the routing table of Router A, the next hop of the route 10.0.2.2 is 10.0.21.2
c. In the routing table of Router A, the next hop of the route 10.0.2.2 is 10.0.12.2
d. If G0/0/1 goes down, the next hop of the route from Router A to 10.0.2.2 is changed to
10.0.21.2

Question 39
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following authentication methods are supported for telnet users? (multiple choice)
Select one or more:
a. AAA local authentication
b. No authentication
c. MD5 authentication
d. Password authentication

Question 40
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Refer to the following display version command output on a device. Which of the following
statements are true? (multiple choice)
Select one or more:
a. The device has been running for 1 minute
b. The VRP version of the device is VRP5
c. The Device name is Huawei
d. The standby MPU of the device is running properly

Question 41
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On the network shown in the figure, SWA and Router A are connected through two links. The two
links are aggregated in manual load balancing mode and the number of the aggregated interface
is 1. If the aggregated link needs to tag outgoing packets with VLAN 100, which of the following
configurations needs to be performed on Router A? (multiple choice) 

Select one or more:

a. Interface Gigabit Ethernet 0/0/1
Eth trunk 1
#
Interface Gigabit Ethernet 0/0/2
Eth-trunk 1
#
b. Interface Eth-trunk 1
Port link-type trunk
Port trunk allow-pass vlan 100
#
Interface GigabithEthernet0/0/1
Eth-trunk 1
#
c. Interface Eth trunk 1
Undo portswitch
#
Interface Eth trunk 1.100
Dot1q termination vid 100
Ip address 10.0.12.2 255.255.255.0
#
d. Interface eth-trunk 1
Mode lacp-static
Port link-type trunk
Port truk allow-pass vlan 100
#
Interface GigabithEthernet0/0/1
Eth-trunk 1
#
Interface GigabithEthernet0/0/2
Eth-trunk 1
#

Question 42
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

In which of the following scenarios does the forward delay timer exist? (multiple choice)
Select one or more:
a. The STP-enabled port transitions from learning to forwarding
b. The STP-enabled port transitions from disabled to blocking
c. The STP-enabled port transitions from blocking to listening
d. The STP-enabled port transitions from Listening to learning
e. The STP enabled port transitions from Forwarding to Disabled

Question 43
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Refer to the following VLAN configurations on a Huawei switch. Which of the following statements
are true? (multiple choice)
Select one or more:
a. Client 1 belongs to VLAN 10, and the commands for VLAN assignment on the switch are
correct
b. Client 4 belongs to VLAN 40, and the commands for VLAN assignment on the switch are
correct
c. Client 3 belongs to VLAN 30, and the commands for VLAN assignment on the switch are
correct
d. Client 2 belongs to VLAN 20 and the commands for MAC address based VLAN assignment on
the switch are correct

Question 44
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

If the Value of the Length/Type in an Ethernet frame is 0x8100, which of the following can be the
payload of the data frame (multiple choice)
Select one or more:
a. ICMP packets
b. TCP datagrams
c. UDP data
d. ARP packets

Question 45
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text
Which of the following statements about encapsulation and decapsulation are true? (multiple
choice)
Select one or more:
a. Encapsulation and decapsulation can implement network communication
b. Encapsulation and decapsulation can locate network faults
c. Encapsulation and decapsulation participation in achieving different network protocol
functions
d. Encapsulation and decapsulation shorten the packet length

Question 46
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

When two switches are connected through link aggregation, what are the requirements for the
interface on the two switches? (multiple choice)
Select one or more:
a. The physical interface rates of the interconnected switches are the same
b. The models of the optical modules used by the interconnected switches are the same
c. The duplex modes of the physical interfaces on the interconnected switches are the same
d. The physical interface quantities of the interconnected switches are the same
e. The physical interface IDs of the interconnected switches are the same

Question 47
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

In the network shown in the figure, which of the following configurations can forbid host A to
access the HTTP service of host B and forbid host B to access the FTP service of host A? (multiple
choice)

Select one or more:

a.
acl number 3000
rule 5 deny tcp source 100.0.12.0 0.0.0.255 destination 100.0.13.0 0.0.0.255 destination port eq www
#
acl number 3001
rule 5 deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.0 0.0.0.255 destination port eq ftp
#
interface gigabit Ethernet 0/0/1
traffic-filter outbound acl 3000
#
interface gigabit Ethernet 0/0/2
traffic-filter outbound acl 3001
#
b. acl number 3000
rule 5 deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.0 0.0.0.255 destination port eq
www
#
acl number 3001
rule 5 deny tcp source 100.0.12.0 0.0.0.255 destination 100.0.13.0 0.0.0.255 destination port eq
ftp
#
interface gigabit Ethernet 0/0/1
traffic-filter inbound acl 3000
#
interface gigabit Ethernet 0/0/2
traffic-filter inbound acl 3001
#
c.
acl number 3000
rule 5 deny tcp source 100.0.12.0 0.0.0.255 source-port eq www destination 100.0.13.0 0.0.0.255
#
acl number 3001
rule 5 deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.0 0.0.0.255 destination port eq ftp
#
Interface GigabithEthernet 0/0/1
Traffic-filter inbound acl 3000
#
Interface GigabithEthernet 0/0/2
Traffic-filter inbound acl 3001
#
d. acl number 3000
rule 5 deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.0 0.0.0.255 destination port eq
www
#
acl number 3001
rule 5 deny tcp source 100.0.12.0 0.0.0.255 destination 100.0.13.0 0.0.0.255 destination port eq
ftp
#
interface gigabit Ethernet 0/0/1
traffic-filter outbound acl 3000
#
interface gigabit Ethernet 0/0/2
traffic-filter outbound acl 3001
#

Question 48
Partially correct
Mark 1 out of 1
Not flaggedFlag question
Question text

Which of the following planes does a network device have? (Multiple Choice)
Select one or more:
a. Management plane
b. Service plane
c. A control plane
d. Data plane

Question 49

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

150.25.0.0 is a network segment and its mask is 255.255.224.0 which of the following are valid
host addresses? (Multiple Choice)
Select one or more:
a. 150.15.3.30
b. 150.25.0.0
c. 150.25.1.255
d. 150.25.2.24

Question 50

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following steps are necessary to configure OSPF on a Huawei router? (Multiple Choice)
Select one or more:
a. Configuration of a router ID
b. Specifying an OSPF area
c. Configuration of the network segments within each area
d. Enabling of an OSPF process

Question 51

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

An ACL rule is as follows. Which of the following IP addresses can be matched by the permit rule?
rule 5 permit ip source 10.0.1.0 0.0.0.254.255 (multiple choice)
Select one or more:
a. 10.0.1.2
b. 10.0.4.5
 c. 10.0.3.4
d. 10.0.2.3

Question 52
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following are basic parameters for configuring static routes?(Multiple Choice)
Select one or more:
a. Next-hop address
b. MAC address of the outbound interface
c. Outbound interface
d. Destination network

Question 53
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On the network shown in the figure, SWA, SWB and SWC run STP. G0/0/2 on SWA is disabled from
sending configuration BPDUs and G0/0/1 on SWC becomes the root port through re-convergence.
Which of the following statements about this process are true? (multiple choice)
no.43
Select one or more:
a. SWA sends configuration BPDUs with the TC bit set to 1
b. SWB sends TCN BPDUs to SWA
c. SWC sends TCN BPDUs to SWB
d. SWB sends configuration BPDUs with the TCA bit set to 1 to SWC

Question 54
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following operations are mandatory to restore the factory default settings of an
AR2200 router? (multiple choice)
Select one or more:
a. Resetting saved configurations
b. Clearing the current configuration
c. Specifying the configuration file for next startup
d. Restarting the AR2200 router

Question 55
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

An ACL rule is as follows. Which of the following IP addresses can be matched by the permit rule?
Select one or more:
a. 10.0.2.3
b. Rule 5 permit ip source 10.0.1.0 0.0.254.255 (Multiple Choice)
c. 10.0.4.5
d. 10.0.1.2
e. 10.0.3.4

Question 56

Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

SWA and SWB run RSTP. Which of the following statements are true? (multiple choice)
no.11mc

Select one or more:

a. G0/0/3 of SWB is backup port
b. G0/0/3 of SWA is a designated port
c. G0/0/2 of SWA is a designated port
d. G0/0/3 of SWB is an Alternate port

Question 57

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following statements about collision domains and broadcast domains are correct?
(multiple choice)
Select one or more:
a. Devices connected to the same Hub form a collision domain
b. Devices connected to the same router form a broadcast domain
c. Devices connected to the same hub form a broadcast domain
d. Devices connected to the same bridge form a broadcast domain
e. Devices connected to the same bridge form a collision domain

Question 58

Correct
Mark 1 out of 1
Not flaggedFlag question
Question text

Refer to the following output of the display ospf interface verbose command on the router R1.
Which of the following statements are true? (multiple choice)

Select one or more:

a. The DR priority of Gigabit Ethernet 0/0/0 is 10
b. R1’s router ID is 10.0.1.1
c. R1 is the BDR
d. The cost of GigabitEthernet0/0/0 is 1

Question 59

Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following port status may exist on an STP-enabled switch? (Multiple Choice)
Select one or more:
a. Discarding
b. Forwarding
c. Disabled
d. Listening

Question 60

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text
As shown in the figure, router A has successfully telneted to router B using 10.0.12.2. Which of the
following operations will interrupt the Telnet session between router A and router B (multiple
choice)

Select one or more:

a. Enable OSPF on G0/0/1
b. Configure G0/0/2
c. Disable G0/0/1
d. Change the IP address of G0/0/1

Question 61
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

The controller is the component of SDN and connects to devices through southbound interfaces.
Which of the following are southbound protocol used by the controller? (multiple choice)
Select one or more:
a. PCEP
b. Open Flow
c. NETCONF
d. SNMP

Question 62
Partially correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following statements about the ACL matching mechanism is/are true? (multiple
choice)
Select one or more:
a. If no ACL is configured, the device returns the result “negative match”
b. By default, the system searches for the rule with the smallest number in the ACL. Once the
rule is matched, the system stops querying the subsequent rules.
c. Whether the packet is discarded or forwarded is determined by the service module to which
the ACL is applied, regardless of whether the packet matches the ACL permit rule, or deny rule
d. If a packet does not match any rule in the ACL, the device returns the result “negative match”

Question 63
Partially correct
Mark 1 out of 1
Not flaggedFlag question
Question text

Which of the following statements are used to correctly describe the Network Functions
virtualization (NFV) architecture?
Select one or more:
a. Management and orchestration (MANO) consist of the NFVO, VNFM and VIM
b. The virtualization infrastructure Manager (VIM) is responsible for managing the virtualization
infrastructure.
c. The NFV Orchestrator (NFVO) is responsible for service orchestration
d. The virtualization Network Function Manager (VNFM) is responsible for lifecycle management
of VNFs

Question 64

Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Refer to the following configurations of SWA and SWB. Which of the following mappings between
MAC addresses, VLANs, and interfaces are true in MAC address tables of SWA and SWB? (multiple
choice)
no.8mc

Select one or more:

a. SWA:
b. SWA:
 c. SWB:
d. SWB:

Question 65
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following sources of routes can be obtained by a router? (multiple choice)
Select one or more:
a. Direct routes
b. Summary routes
c. Dynamic routes
d. Static routes

Question 66
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following configurations can prevent host A and Host B from communicating with
each other? (multiple choice)

Select one or more:

a. acl number 2000
rule 5 deny source 100.0.122.0 0.0.0.255
#
Interface GigabitEthernet 0/0/3
Traffic-filter inbound acl 2000
#
b. acl number 2000
rule 5 deny source 100.0.12.0 0.0.0.255
#
Interface GigabitEthernet 0/0/1
Traffic-filter outbound acl 2000
#
c. acl number 2000
rule 5 deny source 100.0.12.0 0.0.0.255
#
Interface GigabitEthernet 0/0/2
Traffic-filter inbound acl 2000
#
 d.
acl number 2000
rule 5 deny source 100.0.12.0 0.0.0.255
#
Interface GigabitEthernet 0/0/1
Traffic-filter inbound acl 2000
#

Question 67
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Compared with STP, which of the following port roles does RSTP add? (multiple choice)
Select one or more:
a. Designated port
b. Root port
c. Backup port
d. Alternate port

Question 68
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

What are the functions of the DR and BDR in OSPF? (multiple choice)
Select one or more:
a. Reduce the types of OSPF packets
b. Reduce the time taken for establishing the OSPF adjacency relationship
c. Reduce the number of OSPF neighbors
d. Reduce the number of times link state information is exchanged

Question 69
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

If the IPv4 address of a host on a LAN is 192.168.1.1/30, the host will process IP packets with
specific destination IP addresses. Which of the following IP addresses may be the destination IP
addresses? (multiple choice)
Select one or more:
a. 192.168.1.1
b. 192.168.1.3
c. 192.168.1.2
 d. 255.255.255.255

Question 70
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

As shown in the figure, Router A has the following configurations which of the following statements
are true? (multiple choice)

ip route-static 10.0.2.2 255.255.255.255.255 10.0.12.2

ip route-static 10.0.2.2 255.255.255.255.255 10.0.21.2 preference 70
Select one or more:
a. In the routing table of Router, A, the next hop of the route to 10.0.2.2 is 10.0.12.2
b. If G0/0/1 goes Down, the next hop of the route from Router A to 10.0.2.2 is changed to
10.0.21.2
c. In the routing table of Router, A, the next hop of the route to 10.0.2.2 is 10.0.21.2
d. If G0/0/2 goes Down, the next hop of the route from Router A to 10.0.2.2 is changed to
10.0.12.2

Question 71
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following statements regarding single area OSPF are correct? (multiple choice)
Select one or more:
a. The value of an area can be from 0.0.0.0 to 255.255.255.255
b. An IP address needs to be configured on a loopback interface of each router before
configuring OSPF area
c. All of the links of the network need to be advertised in area 0
d. A single area can be configured using any supported area number

Question 72
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following statements regarding single area OSPF are correct? (Multiple Choice)
Select one or more:
 a. An IP address needs to be configured on a loopback interface of each router before
configuring OSPF area
b. The value of an area can be from 0.0.0.0 to 255.255.255.255
c. A single area can be configured using any supported area number
d. All of the links of the network need to be advertised in Area 0

Question 73
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

Which of the following statements about OSPF DD packets and LSAs are true? (Multiple Choice)
Select one or more:
a. An LSA header is only a part of an LSA
b. An LSA header uniquely identifies an LSA
c. A DD packet contains only LSA headers
d. A DD packet contains detailed LSA information

Question 74
Incorrect
Mark 0 out of 1
Not flaggedFlag question

Question text

On Sx7 series switches, which of the following VLANs can be removed by using command “undo”?
(multiple choice)
Select one or more:
a. VLAN 2
b. VLAN 4096
c. VLAN 1
d. VLAN 1024

Question 75
Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which authorization mode(s) is/are supported by the AAA on Huawei AR G3 series routers?
(multiple choice)
Select one or more:
a. RADIUS authorization after successful authentication
b. HWTACACS authorization
c. Local authorization
d. Non-authorization
Question 76

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Which of the following modes are supported by link aggregation? (multiple choice)
Select one or more:
a. LACP mode
b. Manual active/standby mode
c. Hybrid mode
d. Manual load balancing mode

Question 77

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

On the network shown in the figure, when planning traffic, the network administrator requires that
the packets sent from host A to host B pass through G0/0/3 on the router, and the packets from
host B to host A pass through G0/0/4 on the router. Which of the following commands can be used
to meet this requirement? (multiple choice)

Select one or more:

a. Router A: ip route-static 10.0.12.5 255.255.255.252 11.0.12.6
Router B: ip route-static 10.0.12.1 255.255.255.252 11.0.12.1
b. Router A: ip route-static 0.0.0.0 0.0.0.0 11.0.12.6
Router B: ip route-static 0.0.0.0 0.0.0.0 11.0.12.1
c. Router A: ip route-static 0.0.0.0 0.0.0.0 11.0.12.2
Router B: ip route-static 0.0.0.0 0.0.0.0 11.0.12.5
d. Router A: ip route-static 10.0.12.5 255.255.255.252 11.0.12.2
Router B: ip route-static 10.0.12.1 255.255.255.252 11.0.12.5

Question 78

Correct
Mark 1 out of 1
Not flaggedFlag question

Question text

Refer to the following commands run on Gigabit Ethernet0/0/1 and Gigabit Ethernet0/0/2. Which of
the following statements are true? (multiple choice)
eth-trunk2
Select one or more:
a. The PVID of GigabitEthernet0/0/2 is 10
b. The PVID of GigabitEthernet0/0/1 is 10
c. The PVID of GigabitEthernet0/0/1 is 1
d. The PVID of GigabitEthernet0/0/2 is 1