W.E.F. AY 2018-19: Page 1 of 3

GUJARAT TECHNOLOGICAL UNIVERSITY
Bachelor of Engineering
Subject Code: 3151104
Subject Name: Analog and Digital Communication

Semester V
Type of course:
Prerequisite: Analog Electronics, Digital Electronics, Fourier Series, Fourier Transform.

This course explores the fundamentals of electronic communication systems. The course has two primary focuses:
(1) Understanding Analog communications systems with design and analysis of various basic modulation systems.
(2) Understanding Digital communications systems with design and analysis of various basic Digital modulation
systems.
Rationale: The students need to learn basic concepts of analog and digital communication, components of
Analog and Digital Communication systems, Advantages and disadvantages of Analog and Digital
communication systems.
Teaching and Examination Scheme:
Teaching Scheme Credits Examination Marks Total

L T P C Theory Marks Practical Marks Marks
ESE PA ESE PA
(E) (M) Viva (V) (I)
4 0 2 5 70 30 30 20 150
Sr. Content Total %

No. hours Weightage
1 Introduction To Communication System. 7 20

Analog and Digital Messages, Channel Effect, Signal-to Noise ration and
capacity,Modulation and Detection, History of Communications.
(Revision of Signal Transmission through a linear system, Signal distortion
over a communication channel, Signal Energy and Energy spectra density,
Signal power and power density).
2 Amplitude modulation And Demodulations 7 15
Single and Double sideband Amplitude modulation, Amplitude modulation,
Bandwidth-efficient Amplitude modulation, VSB, Local Carrier
synchronization, FDM, PLL.
3 Angle Modulation and demodulation 7 15
Nonlinear Modulation, Bandwidth of Angle-modulated Waves,, Generating
FM waves, Demodulation of FM signals, Nonlinear distortion and
interference, Superheterodyne Receivers, FM broadcasting System.
4 Sampling and Analog to digital Conversion 9 20
Sampling theorem, Sampling and signal reconstruction, Aliasing, Types of
sampling, Quantization, PCM, Companding, DPCM, ADPCM, Delta
modulation, Adaptive delta modulation, T1 carrier system
5 Digital Data Transmission 9 20
Components of digital communication system, line coding, pulse shaping,
Scrambling, Regenerative Repeater, Eye Diagram, Timing Extraction,
Detection Error Probability, M-ary communication, Digital Carrier Systems
Page 1 of 3
w.e.f. AY 2018-19
6 Introduction to Digital Modulation-Demodulation Techniques 6 10

Modulation techniques for ASK,FSK, PSK, MSK, BPSK, QPSK, GMSK
Total 45 100
Suggested Specification table* with Marks (Theory):

Distribution of Theory Marks
R Level U Level A Level N Level E Level C Level
15 15 10 15 10 5
Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C:

Create and above Levels (Revised Bloom’s Taxonomy).ode: 2921103
*This specification table shall be treated as a general guideline for students and teachers. The
actual distribution of marks in the question paper may vary from above table.
Reference Books:
1. Digital and analog communication system by B.P.Lathi .Zhi Ding 4th edition.
2. Communication Systems by Simon Haykins.
3. Electronic Communications Systems by Wayne Tomasi.
Suggested List of practicals:-

1. To understand and the concept of Pulse Code Modulation and To observe the Performance of PCM
system.
2. To understand and the role of signal compression/Expansion on S/N ratio.
3. To understand the concept of Delta Modulation and to achieve the Delta Modulation / De- Modulation.
4. To study the performance of An-adaptive Delta modulator/De-modulator circuits
5. To Study and observe the performance of Digital carrier system—ASK.
6. To Study and observe the performance of Digital carrier system—FSK.
7. To Study and observe the performance of Digital carrier system—PSK.
8. To Study and observe the performance of Return to Zero (RZ) types of line codes.
9. To Study and observe the performance of Non- Return to Zero (NRZ) types of line Codes.
10. To establish a PCM based transmission-reception link.
11. To Study and observe the effect of signal Distortion using EYE-Diagram.
12. To Study and Perform sampling theorem and reconstruction.
13. To Study and perform Error Detection and Correction codes.
14. To perform TDM-PCM Transmission and Reception.
15. To study and perform Data Conditioning carrier modulation.
16. To study and perform Data Re-Conditioning carrier De-modulation.
17. To study and perform TDM pulse amplitude modulation/demodulation.
18. To study and perform PAM, PWM, PPM. 19 Few simulation exercises on digital communication
techniques / basic systems.
Mini Project:
Mini project with emphasis on design and implementation is compulsory with the help of hardware and
simulation tools.
Page 2 of 3
w.e.f. AY 2018-19
Useful Tools and LRs:-

1. NPTEL MOOC Courses
2.Swayam Portal AICTE
3. National Digital Library, IIT KGP.
4. Virtual Lab by IIT Bombay.
5.MATLAB
6.SCILAB
7.LABVIEW
8.Various Analog and Digital Communication Trainers.
Course Outcomes:
After learning the course, the students should be able to
Sr. No. CO statement Marks %

weightage
CO-1 Understand the Basics of Analog and Digital Communication Systems and 20
Modulation as well as Transmission Techniques.
CO-2 Analyse the various Analog and Digital Modulation and Transmission Techniques 40
CO-3 Implement the Analog and Digital Communication Systems. 40
Page 3 of 3
w.e.f. AY 2018-19

W.E.F. AY 2018-19: Page 1 of 3

Uploaded by

Copyright:

Available Formats

W.E.F. AY 2018-19: Page 1 of 3

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

W.E.F. AY 2018-19: Page 1 of 3

Uploaded by

Copyright:

Available Formats

GUJARAT TECHNOLOGICAL UNIVERSITY

Subject Name: Analog and Digital Communication

Prerequisite: Analog Electronics, Digital Electronics, Fourier Series, Fourier Transform.

Teaching and Examination Scheme:

Teaching Scheme Credits Examination Marks Total

Sr. Content Total %

1 Introduction To Communication System. 7 20

6 Introduction to Digital Modulation-Demodulation Techniques 6 10

Suggested Specification table* with Marks (Theory):

Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C:

Suggested List of practicals:-

Useful Tools and LRs:-

Sr. No. CO statement Marks %

You might also like