Scribd Logo
Upload

Welcome to Scribd!

  • 851 views

    MATERIAL SAFETY DATA SHEET - Thermoplastic Road Marking Materials

    Uploaded by

    Hesham Samir
    This document provides a material safety data sheet for yellow and white thermoplastic road marking materials that are supplied in powder form. It lists the product ingredients including synthetic resin binder, calcium carbonate and titanium dioxide pigments. It identifies hazards for both powder and molten forms, including possible skin and eye irritation from contact. It provides first aid measures and lists requirements for proper storage, handling, worker protection, and disposal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MATERIAL SAFETY DATA SHEET - Thermoplastic Road Marking Materials

    Uploaded by

    Hesham Samir
    851 views4 pages
    This document provides a material safety data sheet for yellow and white thermoplastic road marking materials that are supplied in powder form. It lists the product ingredients including synthetic resin binder, calcium carbonate and titanium dioxide pigments. It identifies hazards for both powder and molten forms, including possible skin and eye irritation from contact. It provides first aid measures and lists requirements for proper storage, handling, worker protection, and disposal.

    Original Title

    MATERIAL SAFETY DATA SHEET_thermoplastic road marking materials

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a material safety data sheet for yellow and white thermoplastic road marking materials that are supplied in powder form. It lists the product ingredients including synthetic resin binder, calcium carbonate and titanium dioxide pigments. It identifies hazards for both powder and molten forms, including possible skin and eye irritation from contact. It provides first aid measures and lists requirements for proper storage, handling, worker protection, and disposal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    851 views4 pages

    MATERIAL SAFETY DATA SHEET - Thermoplastic Road Marking Materials

    Uploaded by

    Hesham Samir
    This document provides a material safety data sheet for yellow and white thermoplastic road marking materials that are supplied in powder form. It lists the product ingredients including synthetic resin binder, calcium carbonate and titanium dioxide pigments. It identifies hazards for both powder and molten forms, including possible skin and eye irritation from contact. It provides first aid measures and lists requirements for proper storage, handling, worker protection, and disposal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MATERIAL SAFETY DATA SHEET

    1) PRODUCT NAME :
    REDA NATIONAL CO. – Yellow and White Thermoplastic Road
    Marking Materials (supplied in Powder Form).

    2) COMPOSITION AND INFORMATION ON INGREDIENTS:


     Binder – Consist of Synthetic Resin Modified with Mineral Oil
    Plasticizer (20± 2%).
     Aggegate – Selected light coloured white calcium carbonate
    and white non-reactive sand.
     Pigments – Consist of special heat stable (lead chromate)
    for yellow .

    Max Pigment - 2 % w/w


    Max lead Chromate <1%
    (CI Pigment = Y-34)
    (CI No. = 77600)

    and rutile grade TiO2 for white.

     Glassbeads – Premix Glassbeads.


     Applicable Cas No. a) 64742-16-1
    b) 1344-37-27758-97-6
    c) 13463-67-7

    3) HAZARD IDENTIFICATION:
    A) Powder Form :

    Skin Contact :

    Low Order of Toxicity


    Low Order of Irritation
    Contact with Skin Should Be Minimized.
    EYE CONTACT:
    Particles may scratch eye surface/cause mechanical irritation.
    INHALATION
    Negligible Hazard
    Should be used in ventilated Areas
    Dust Long Term Exposure Limit
    10 mg/m² 8 hour time weighted average

    INGESTION
    Partially non-toxic
    Ingestion should be avoided

    A) MOLTEN FORM

    Skin Contact
    Contact with skin will cause burns and must be avoided.

    Eye Contact
    Contact with eyes will cause serious damage and must be avoided.

    Inhalation of Fumes:
    Negligible Hazard
    Should be used in well ventilated areas.

    Ingestion:
    Will cause serious harm and must be avoided – seek immediate
    medical attention.

    4) FIRST AID MEASURES:


    Inhalation : Remove to fresh air. If breathing is difficult give oxygen.
    In extreme cases, where breathing has stopped, give artificial
    respiration. Seek medical attention.
    SKIN : Wash skin with plenty of soap and water.

    EYES: Immediately flush eyes with plenty of water for at least 10


    minutes.

    Ingestion: Wash mouth out with water. Do not induce vomiting. Get
    medical attention.

    5) FIRE FIGHTING MEASURES:

    Suitable Extinguishing Media:


    Use water mist spray. Dry powder form or CO2 extinguisher.

    SPECIAL PRECAUTIONS:
    Toxic vapors such as carbon monoxide may be released during fire.
    Positive pressure breathing apparatus should be used.

    FLASH POINT: Above 240°C (Claveland Open Cup)

    6) ACCIDENTAL RELEASE MEASURES:


    Personal Precautions:
    As described in Section 8.

    Environmental Precautions
    Do not allow to enter the drainage system.

    7) HANDLING AND STORAGE:


     Before handling the product note protective measures in
    Section 8, materials should be stored in covered area.
     Powder mix materials should be protected from rain and
    moisture.
     The presence of moisture in the material can cause foaming,
    spitting and expansion in the pre-heater.
     No other special precautions are required for transportation.

    8) EXPOSURE CONTROL/PERSONAL PROTECTION


    Wear long sleeved flame retardant overalls, industrial safety
    shoes/boots. Industrial heat resistant gloves with extended sleeves,
    gauntlet type. Full face shield for loading and running off pre-heaters.

    RESPIRATORY PROTECTION:
    An appropriate air-purifying respirator should provide adequate
    protection. The recommended type for dust when handling the solid,
    or for organic when handling the thermoplastic paint.

    9) PHYSICAL AND CHEMICAL PROPERTIES


    Physical Properties:
    Softening Point :102± 9.5°C
    Specific Gravity GM/CC : 2.0 (APPROX)
    Shelf Life : 12-18 months if stored safely and
    securely in areas not subject to
    excessive heat or contamination from
    fuels, oils or greases.

    10) STABILITY AND REACTIVITY:


    Chemical Stability : Stable

    11) DISPOSAL CONSIDERATIONS:


    Waste Materials should be disposed of in accordance with local
    disposal regulations for non-hazardous substances.

    12) TRANSPORTATION INFORMATION: Non-hazardous

    You might also like