FB50-YT(open)/FC50-YT(silent)

■ Model:
FB55X-YT(open)/FC55X-YT(silent)
Powered by YTO

■ Generator Specification ■ Alternator Specification

— 50Hz Manufacture
Powers PRP（1） ESP（2） Prime Brand

Voltage (V) KW KVA KW KVA Amps Model FPA22-403(50HZ)/(60HZ)

380/220 40 50 44 55 76,0 Series LSA TAL STD(3) S STD(3) STD(3)

400/230 40 50 44 55 72,2 Option ○ ○ ○ ○ ○ ●

415/240 40 50 44 55 69,6

— 60Hz Alternator Data

Powers PRP（1） ESP（2） Prime Frequency / Speed 50Hz / 1500rpm 60Hz / 1800rpm
Voltage (V) KW KVA KW KVA Amps Coupling / No. of Bearing Direct / Single Bearing
380/220 44 55 48 61 83,6 Phase / Poles 3-Phase / 4-Pole
400/230 44 55 48 61 79,4 Power Factor Cos Φ = 0.8
415/240 44 55 48 61 76,5 AVR Regulation Yes
Voltage Regulation ± 1%
Insulation Class H
Drip Proof IP23
Engine Data Excitation Self-Excited
Engine brand YTO Altitude ≤1000
Engine model LR4B5-D Overspeed 2250
Speed control type Electronic
Starter motor voltage 12V Ratings:
All three phase generator sets are rated at 0.8 power factor. All single-phase
Engine speed (RPM) 1500 1800
generator sets are rated at 0.8 or 1.0 power factor.
standby power 12,25 13,48
Fuel
100% prime power 10,21 11,23 (1) PRP (Prime Power):
Consumption
Available continuously at variable load in lieu of commercially purchased power for
(L/H) 75% prime power 8,17 8,98
an unlimited number of hours per year accordance with ISO8528-1, and an overload of
50% prime power 6,13 6,74 10% permitted for one hour in every twelve hours of operation in accordance with ISO

(2) ESP (Standby Power):

Emergency Standby Power in variable load applications in accordance with ISO8528-1
in the event of a utility power failure.

(3) STD:Standard Alternator.

TIDE Power reserves the right to change the design or specifications without notice and without any obligation or liability.
 Fuel system
Injection system Direct Injection
Governor type Mechanical
Fuel oil type 0# or 10#
Fuel injection pump 4BB pump

Standard reference Conditions

Note: Standard reference condition 25°C[77°F] air inlet temp, 1000m(328ft) A.S.L
30%
relative humidity. Fuel consumption data with diesel fuel with specific gravity of
0.85 and
Test Conditions
Dimension and Weight@50HZ/60HZ Air temperature 25 °C
Dimension Open Silent Barometric pressure 100kPa
Length (L) 1800 2727 Relative humidity 30%
Width (W) 760 1150 Air inlet Restriction at maximum power (no ≤ 5kPa
Height (H) 1300 1430 Exhaust back pressure (nomina ≤ 6 kPa
Net Weight 810 1240
Fuel Tank (L) 120 120 Lubrication system
Noise(dB) at 7m no load N/A 71(50HZ)/72(60HZ) Lubricating oil type CF-4
Super Slient Recommended Lubricating oil capacity 14 litres
— Idle speed(Minimum ) 98kPa
— Governed speed(Maximum ) 294-490kPa
■ Engine Specification: LR4B5-D Maximum oil temperature 121 ℃
Lubricating oil temperature maximum to be 115°C
Maximum engine operating angles
Basic technical data Front up,front down/right side or left 20°/15°

No. of cylinders 3
Cylinder arrangement In-line
Cycle 4 stroke Electrical system
Induction system Turbocharged Alternator 2volts with integral regulato
Compression ratio 17:1 Starter motor 12V
Bore 108mm Recommended Battery Capacity 195A
Stroke 135mm
Cooling medium Liquid
Displacement 5.18 L
Approximate engine weight 410±20kg

Energy balance 50Hz 60Hz

Cooling system Energy in fuel 6085btu/min 6085btu/min
Coolant capacity-engine 6L Gross heat to power 2273btu/min 2273btu/min
Thermostat operating range 76~95 °C Energy to coolant and oil 1702btu/min 1702btu/min
Maximum Top Tank Temperature 99℃ Energy to exhaust 1963btu/min 1963btu/min
Coolant intake size Φ52mm Heart to radiation 143tu/min 143tu/min
Coolant outlet size Φ48mm
 ■ Standard configuration

Engine Alternator Canopy Electrical cabinet

Radiator AVR Low carbon steel plate Mains floating charge
Standard starting motor（12V or 24V） Single bearing Surface powder coating Breaker（rated current≤1250A）
Oil sensor IP23 Flame retardant and sound Maintenance free battery
Water temperature sensor attenuated foam Control panel IP42
Standard engine charger Top lifting
Standard oil drainage pump Stainless steel screws for
Standard air filter, oil filter, f canopy external

Water/fuel separator
Oil drainage pump
Base Standard voltage Exhaust system Others
Rubber anti-vibration mount 380/220V Open type- Industrial Engine/Alternator operation manual
400/230V silencer + accessories Generator set operational manual
415/240V Canopy type- Residential Generator set electrical wiring di
440/254V silencer Generator set testing report
220/133V
208/127V
（ Single phase 230V、220V）

■ Optional configuration

Engine Alternator Base

Air inlet heater Winding temperature sensor Extra capacity base fuel tank
Oil heater PMG Bunded base fuel tank
Jacket water heater Space heater Diesel fuel level sensor
Heavy duty air filter Anti corrosive winding Automatic fuel refilling system
Oil automatic refilling system IP44 Three ways valve
Enlarge radiator (suitable for high temperature) Air inlet filter Spring vibration absorber
Anti corrosive radiator Marine paint for skid base
Heat exchanger instead of radiator
Remote radiator

Electrical system Exhaust system Canopy

Synchronizing controller Open type set with Residential silencer Surface paint or marine paint
4 poles switch Two poles silencer Stainless steel, Galvanized Canopy
Battery switch Super silent design canopy
Nickel-cadmium battery/extra capacity battery Additional top lift
IP44 protection Control panel Stainless steel locks and hinges
Motorized switch Anti sand and dust filter for air
Switch with shunt line diagram Electrical louvre
IP44 control cabinet
■ Tide Power Easycon Function Summary

EC 2.0 / EC 3.0 / EC 4.0 / EC 5.0 /

Controller Model / ComAp
Nano Plus AMF20 AMF25 IG-NT

Controller Photos

Standard Supply × × ● ○
Viewable Parameters
Phase Voltage × 3 3 3
Current Instrumentation ● ● ●
Frequency ● ● ● ●
Active Power × ● ● ●
Reactive Power × ● ● ●
Apparent Power × ● ● ●
Power Factor × ● ● ●
Electric Energy Metering × ● ● ●
Generator Protection
Abnormal Voltage ● ● ● ●
Over-current Warning × ● ● ●
Over current Protection ● ● ● ●
Over Frequency Protection ● ● ● ●
Short Circuit Protection MCCB / ● MCCB / ● MCCB / ● MCCB / ●
Engine Figure
Oil Pressure ● ● ● ●
Water Temperature ● ● ● ●
Fuel Meter / Fuel Sensor ● /○ ● /○ ● /○ ● /○

Speed ● ● ● ●
Battery Voltage ● ● ● ●
Runing hours ● ● ● ●
Engine Protection
Low Oil Pressure Warning × ● ● ●
Low Oil Pressure Protection ● ● ● ●
High Temperature Warning × ● ● ●
High Temperature Protection ● ● ● ●
Overspeed Warning × ● ● ●
Overspeed Protection × ● ● ●
Alternator Charger ● ● ● ●
Functions
Remote Start ● ● ● ●
AMF (Auto Main Failure) ● ● ● ●
Service Indicate × × ● ●
Fault History ● ● ● ●
Gen-Gen Synchronising × × × ●
Gen-Mains Synchronising × × × ●

Remark: ● Standard Supply ○ Available as Optional × Not Available

 ■ Automatic Transfer Switch A.T.S - 4 Poles

Tide Power offers not only a changeover switch but also an integrated mains
detection and switch system for your 24 Hour Power Protection. The system
enables automatic start-up and operation of the generating set in the event of a
mains power failure, overvoltage or loss of a mains automatic re-transfer once it
come back.

System Advantages
▪ Automatically transfer and re-transfer load from main power to gen-power without

operator intervention.operation（Both automatic and manual).

▪ ATS Controller (AMF function), seamless integration with AMF25

▪ Available from 32 – 4000A, better protection for 4 pole switch.

▪ Available in standard, bypass isolation and service-entrance configurations.

▪ Configurable in open, closed and programmed transition operating modes.

▪ Designed to interface seamlessly with TIDE POWER generators and switchgear.

▪ Drip proof IP42 enclosure.

▪ Easy installation: wall-mounted & floor standing

▪ Comes fully loaded with the technology to do the job.

ATS cabinet size（mm） 500*400*200(1) 650*500*300(1) 1000*600*600 1600*1000*800

Rated current（A） 40~100 40-250 400-630 2000-3200

(1)The actual dimension of the ATS will depend on the brand used

Warranty

Tide Power distributor, dealer, or authorized representative

performs startup within 6 months of the date of shipment from Warranty Coverage
the factory, warranty coverage will begin on the startup date Generators for commercial use :
(Register the startup date to Tide within 6 month is essential 18 months or 1000 operating hours (for engine
and can be enforced). This warranty does not apply to malfunctions label with Prime power) 18 months or 200 hours for
caused by damages, unreasonable use, misuse, repair or labels with standby rated gensets.
service by unauthorized persons, or normal wear and tear.