Scribd Logo
Upload

Welcome to Scribd!

  • 392 views

    Testing & Commissioning Method Statement For Fire Fighting Pumps

    Uploaded by

    vin ss
    The document provides a method statement for testing and commissioning fire fighting pumps. It outlines precommissioning and commissioning procedures. The precommissioning procedure involves checking the pump installation, protection, identification, alignment, lubrication, rotation, wiring and valves. The commissioning procedure involves starting the pump with the discharge valve closed, recording head pressures at different flows, checking for leaks, vibration and performance curves. Attachments include check sheets, performance records and a risk assessment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Testing & Commissioning Method Statement For Fire Fighting Pumps

    Uploaded by

    vin ss
    392 views4 pages
    The document provides a method statement for testing and commissioning fire fighting pumps. It outlines precommissioning and commissioning procedures. The precommissioning procedure involves checking the pump installation, protection, identification, alignment, lubrication, rotation, wiring and valves. The commissioning procedure involves starting the pump with the discharge valve closed, recording head pressures at different flows, checking for leaks, vibration and performance curves. Attachments include check sheets, performance records and a risk assessment.

    Original Description:

    PPPP[[[

    Original Title

    Testing & Commissioning Method Statement for Fire Fighting Pumps

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a method statement for testing and commissioning fire fighting pumps. It outlines precommissioning and commissioning procedures. The precommissioning procedure involves checking the pump installation, protection, identification, alignment, lubrication, rotation, wiring and valves. The commissioning procedure involves starting the pump with the discharge valve closed, recording head pressures at different flows, checking for leaks, vibration and performance curves. Attachments include check sheets, performance records and a risk assessment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    392 views4 pages

    Testing & Commissioning Method Statement For Fire Fighting Pumps

    Uploaded by

    vin ss
    The document provides a method statement for testing and commissioning fire fighting pumps. It outlines precommissioning and commissioning procedures. The precommissioning procedure involves checking the pump installation, protection, identification, alignment, lubrication, rotation, wiring and valves. The commissioning procedure involves starting the pump with the discharge valve closed, recording head pressures at different flows, checking for leaks, vibration and performance curves. Attachments include check sheets, performance records and a risk assessment.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Testing & Commissioning

    Method Statement For Fire


    Fighting Pumps
     Testing & Commissioning
     Fire Fighting Systems

    1016



     0
     


     Share

    Below is a complete step wise Testing & Commissioning Method Statement For Fire
    Fighting Pumps. The purpose of this procedure is to define the step by step method to
    implement the correct practices for the testing, precommissioning & commissioning of “Fire
    Fighting Pumps” through the guidelines contained herein so as to ensure that the job
    execution complies with the project requirements and serves the intended function to
    satisfactory level.

    This method applies for startup of pumps only not for a complete firefighting system which
    requires a separate detailed procedure for commissioning.

    TOOLS / EQUIPMENTS

     Portable Hand tools


     Step Ladder
     Measuring instruments (with valid calibration certificate)

    TESTING & COMMISSIONINGF


    PROCEDURE
    Precommissioning Procedure for Fire
    Fighting Pumps
    1. Ensure that the pump installation is complete and approved.
    2. The civil defence approval shall be obtained prior to the precommisioning &
    commissioning of the Fire Fighting System.
    3. Ensure that no damage occurs between mechanical completion
    & precommissioning.
    4. Repair all damages to the equipment paint finish.
    5. Ensure that the pumps are identified location wise and service wise.
    6. Check again the alignment of pump and driver shaft and comply with manufacturer
    instructions. check shaft sleeves are fitted properly to protect the shaft against wear,
    erosion & corrosion.
    7. Note the details of each motor such as make, model number, frame size, kW rating
    and RPM.
    8. Check that the Fire Fighting piping network is complete with proper valves, drains,
    vents, strainers, pressure switches & instruments in place.
    9. Ensure that the Fire Fighting network is hydraulically pressure tested and approved.
    10. Ensure the pumps bearings are lubricated/greased as per
    manufacturer recommendation.
    11. Ensure the pump shafts are rotated by hand freely.
    12. Ensure that electrical power connections and earthing is proper.
    13. Ensure that the field wiring is pre-tested for continuity and insulation resistance.
    14. Ensure that all the relevant valves are in open position. Pump discharge valve
    should be in closed position.
    15. Check for free rotation of motor shaft by hand.
    16. Check that the coupling guards are installed & all safety devices are operational.
    17. Check identification and labeling for equipment.

    Commissioning Procedure for Fire Fighting


    Pumps
    1. Ensure that all the pre-commissioning checks are carried out successfully.
    2. Ensure the discharge valve is closed.
    3. Ensure the pump & the pump suction are completely filled with water prior to starting
    the pump.
    4. Start the pump and record shut-off head for low zone.
    5. Slowly open the discharge valve of the low zone header & record the discharge head
    for 50% of the design flow. The discharge valve shall be slowly opened & the flow
    through the piping shall be checked in the flow meter for every rotation of the valve
    spindle until the flow is 50% of the design.
    6. Similarly discharge head shall be measured for 100% & 150% of design flow.
    7. Observe leakage from stuffing boxes and adjust the flow for lubrication of packing.
    8. Repeat steps 2 & 3 for the high zone & record the values.
    9. Check pumps for overheating by physically touching by hand.
    10. Check for any vibration/noise.
    11. Check current, voltage & rpm of the motor & record the values.
    12. Calculate the actual pump performance and plot actual performance curve for both
    low zone & high zone.
    13. Check the interface with BMS & fire alarm system.
    14. The wiring diagram of pump controls & schematic piping shall be displayed near or
    inside the control panel.

    ATTACHMENTS

     Precommissioning check sheet for Fire Fighting Pumps


     Commissioning check sheet for Fire Fighting Pumps
     Performance Record for Fire Fighting Pumps
     Risk Assesment

    You might also like