Scribd
Upload
30 views

Assignment

The document provides sieve analysis data for a set of particles, including sieve size, sieve opening size, average diameter for each increment, mass fraction retained, and cumulative mass fraction smaller than the given size. It also lists several questions related to cement production processes including particle size reduction via crushing, types of cement, open and closed circuit grinding, cement mineral phases, and rotary kiln tires.

Uploaded by

dpurnima
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
30 views

Assignment

The document provides sieve analysis data for a set of particles, including sieve size, sieve opening size, average diameter for each increment, mass fraction retained, and cumulative mass fraction smaller than the given size. It also lists several questions related to cement production processes including particle size reduction via crushing, types of cement, open and closed circuit grinding, cement mineral phases, and rotary kiln tires.

Uploaded by

dpurnima
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

i.

Volume mean diameter


ii. Mass mean diameter
The shape factor a=1.6 and =0.78 (2M)

Sieve Size Sieve Opening Average Mass fraction Cumulative mass


Dpmm Diameter in each retained xi fraction smaller
increment Dpmm tha Dp
240 2.399 - 0.000 1.00
200 2.032 2.215 0.012 0.988
170 1.676 1.854 0.058 0.930
120 1.201 1.438 0.061 0.869
100 1.00 1.100 0.140 0.729
85 0.954 0.977 0.164 0.565
70 0.706 0.831 0.0206 0.359
50 0.500 0.604 0.123 0.236
40 0.420 0.460 0.081 0.155
30 0.296 0.358 0.052 0.103
20 0.211 0.254 0.041 0.062
15 0.157 0.184 0.038 0.024
Pan - 0.078 0.024 0.00

Q. 3 Particles of average feed size 50x10-4 m are crushed to an average product size of 10x10 -4 m at the
rate of 20 tons per hour. At this rate, the crusher consumes power 40 KW of power of which 5KW
are required for running the mill empty. Calculate the power consumption if 12 tons/h of this product
is further crushed to 5x10-4 m size in same mill? Assume that Rittinger’s law is applicable.
(2M)
Q. 4 Write in detail about the various types of cement available? (2M)
Q. 5 Write in detail about open circuit grinding and closed circuit grinding? (2M)
Q. 6 Write in detail about the following phases in cement
(i) Alite(ii) Belite (iii) Aluminate (iv) Ferrite (2M)
Q. 7 With the help of diagram explain about tyres used in rotary kiln? (2M)

You might also like