The Special Manufacturer & Supplier for Rigging Equipment and Associated Fittings

ASTM80 Standard Chain Proof Coil Chain(G30)

MAX MAX
MATERIAL WORKING BREAKING FORCE LENGTH WEIGHT
PROOF TEST
SIZE DIAMERTER LOAD LIMIT MINIMUM PER 100 PER 100
LINKS FEET

IN MM LBS KG LBS KN LBS KN IN M LBS KG

Uses-General purpose ,low carbon steel chain. Used in a wide 3/16 0.218 5.5 750 340 1500 6.7 3000 13.3 99 2.51 42 19
range of aopplications.Norninal weights and dimensions are 1/4 0.281 7.1 1250 570 2500 11.1 5000 22.2 104 2.64 76 34

subject to a plus or minus tolerance of 4%. 5/16 0.343 8.7 1900 860 3800 16.9 7600 33.8 114 2.89 115 52

Finish-Self Colred (SC),Bright Zinc(BZ),Hot Dipped 3/8 0.406 10.3 2650 1200 5300 23.6 10600 47.2 128 3.25 166 75

Galvanized (HDG). 7/16 0.468 11.9 3500 1590 7000 31.1 14000 62.3 142 3.60 225 102

Material : low carbon steel,mild link steel 1/2 0.531 13.5 4500 2040 9000 40.0 18000 80.1 156 3.96 289 131

Packing : reels, gunny bags,drum ,or cartons 5/8 0.656 16.7 6900 3130 13800 61.4 27600 122.8 194 4.92 425 193

Caution: Do not use for overhead lifting.Working load limit 3/4 0.781 19.8 9750 4420 19500 86.7 39000 173.5 220 5.59 612 278

must not be exceeded .

NACM84/90 Standard Proof Coil Chain(G30)

MATERIAL WORKING PROOF BREAKING INSIDE INSIDE

SIZE
DIAMETER LOAD LIMIT TEST(MIN) FORCE MIN LENGTH WIDTH

MM IN MM IN KG LBS KN LBS KN LBS MM IN MM IN

4.0 1/8 4.0 0.156 170 375 3.6 800 7.1 1600 23.9 0.94 6.4 0.25

5.5 3/16 5.5 0.217 365 800 7.2 1600 14.3 3200 24.8 0.98 7.7 0.30

Uses-General purpose ,low carbon steel chain. Used in a wide 7.0 1/4 7.0 0.276 580 1300 11.6 2600 23.1 5200 31.5 1.24 9.8 0.38

range of aopplications.Norninal weights and dimensions are 8.0 5/16 8.0 0.315 860 1900 15.1 3400 30.2 6800 32.8 1.29 11.2 0.44

subject to a plus or minus tolerance of 4%. 10.0 3/8 10.0 0.394 1200 2650 23.6 5300 47.1 10600 35.0 1.38 14.0 0.55

Finish-Self Colred (SC),Bright Zinc(BZ),Hot Dipped 13.0 1/2 13.0 0.512 2030 4500 39.8 8950 79.6 17900 45.5 1.79 18.2 0.72

Galvanized (HDG). 16.0 5/8 16.0 0.630 3130 6900 60.3 13600 120.6 27200 56.0 2.20 20.0 0.79

Material : low carbon steel,mild link steel 20.0 3/4 20.0 0.787 4800 10600 94.3 21200 188.5 42400 70.0 2.76 25.0 0.98

Packing : reels, gunny bags,drum ,or cartons 22.0 7/8 22.0 0.866 5810 12800 114.1 25600 228.1 51200 77.0 3.03 27.5 1.08

Caution: Do not use for overhead lifting.Working load limit 25.0 1" 26.0 1.020 8140 17900 159.1 35800 318.2 71600 90.9 3.58 31.7 1.25

must not be exceeded .

NACM96 Stand Link Proof Coil Chain(G30)

MATERIAL WORKING PROOF BREAKING INSIDE INSIDE

SIZE
DIAMETER LOAD LIMIT TEST(MIN) FORCE MIN LENGTH WIDTH

MM IN MM IN KG LBS KN LBS KN LBS MM IN MM IN

4.0 1/8 4.0 0.156 180 400 3.8 800 7.2 1600 23.9 0.94 6.4 0.25

5.5 3/16 5.5 0.217 365 800 7.2 1500 14.4 3200 24.8 0.98 7.7 0.30
Uses-General purpose ,low carbon steel chain. Used in a wide 7.0 1/4 7.0 0.276 580 1300 11.6 2600 23.2 5200 31.5 1.24 9.8 0.38

range of aopplications.Norninal weights and dimensions are 8.0 5/16 8.4 0.331 860 1900 16.9 3800 33.8 7600 32.8 1.29 11.2 0.44

subject to a plus or minus tolerance of 4%. 10.0 3/8 10.0 0.394 1200 2650 23.5 5300 47.2 10600 35.0 1.38 14.0 0.55

Finish-Self Colred (SC),Bright Zinc(BZ),Hot Dipped 11.9 7/16 11.9 0.488 1680 3700 32.9 7400 65.8 14800 41.5 1.64 16.6 0.65

Galvanized (HDG). 13.0 1/2 13.0 0.512 2030 4500 40.0 9000 80.0 18000 45.5 1.79 18.2 0.72

Material : low carbon steel,mild link steel 16.0 5/8 16.0 0.630 3130 6900 61.3 13800 122.8 27600 56.0 2.20 20.0 0.79

Packing : reels, gunny bags,drum ,or cartons 20.0 3/4 20.0 0.787 4800 10600 94.3 21200 188.6 42400 70.0 2.78 25.0 0.98

Caution: Do not use for overhead lifting.Working load limit 22.0 7/8 22.0 0.866 5810 12800 114.1 25600 228.2 51200 77.0 3.03 27.5 1.08

must not be exceeded . 25.0 1 26.0 1.020 8140 17900 159.1 35800 318.2 71600 90.9 3.58 31.7 1.25

TEL:+86 532 8866 8543 FAX: +86 532 8273 7869 EMAIL:[email protected] Http://www.rigginglifting.com

34