DTMF Communication Instead of Using Microcontroller
DTMF Communication Instead of Using Microcontroller
2.
It can control devices in a long distance.
3.
It avoids wastage of power.
Limitations
1.
Security is not provided, anyone can control the automation.
2.
Limited number of loads that can be connected.
F.
DEFINITION OF TERMS
Automatic
It means having controls that allow something to work or happen without
being directly controlled by a person
Automation
The technique of making an apparatus, a process, or a system operates
automatically.
f study
This research paper work is written by Mohd Ridzuan Bin Johary,
Bachelor of Electrical Engineering (Microelectronics), Universiti
Teknologi Malaysia, June 2012. In this research, the project used
PIC18F4620 microcontroller as a main controller device of a remote
control system and PIC16F628A microcontroller for a smart switch
device as shown in Figure 2.1 and Figure 2.2. The communication
system between two devices is the radio frequency (RF) with operating
frequency 315 MHz. The performance of the system is depends on the
distance between smart switch and remote control device. The
weakness of this project is the switch can only be switched “ON” and
“OFF” by using only single controller and cannot been turn “ON” and
“OFF” manually without the controller.
https://docuri.com/download/design_59c1d8abf581710b28677e32_pdf
l literature 1
Alan Vergara This work develops an automated household utility power monitoring system and data
logging in real-time. It utilizes the Arduino Uno Rev3 Microcontroller board intended for use in
conjunction with the ATmega328 chip. For monitoring these parameters, it will be connected to a
current transformer through the current and voltage sensor circuit. The system will convert these raw
data to digital input for data acquisition and will log these to an SD card by the SD/MMC shield module
for data retention in case of power failures. The system is also equipped with DS1307 serial RTC (Real-
Time Clock) chip which is responsible for providing real time clock and date needed in the data logging
operation. Results and findings indicated that the device has indeed successfully performed its desired
function as an automated household utility power monitoring system. As such it will display in real-time,
the consumed average power in watt along with its price. This will serve as an assessment parameter in
order to measure the acceptability, performance relative to functionality, and marketability of the
accomplished technology.
file:///C:/Users/rowell/Downloads/DevelopmentofAnArduino-
BasedAutomatedHouseholdPowerMonitoringSystem.pdf
l study 3