Scribd
Upload
205 views12 pages

LED Build Navod Controller Manual DMX

This document provides instructions for setting up and using an LED controller board. It has 8 main sections that describe: (1) the controller's features, (2) supported LED driver chips, (3) using SD cards to control animations, (4) internal control mode, (5) connecting to a DMX console, (6) synchronizing multiple controllers, (7) setting DMX addresses, and (8) notes on addressing DMX chips. The controller can drive up to 2048 pixels across various color and chip types, and has options to play files, adjust speed, and loop or single play modes.

Uploaded by

Darshana Nissanka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
205 views12 pages

LED Build Navod Controller Manual DMX

This document provides instructions for setting up and using an LED controller board. It has 8 main sections that describe: (1) the controller's features, (2) supported LED driver chips, (3) using SD cards to control animations, (4) internal control mode, (5) connecting to a DMX console, (6) synchronizing multiple controllers, (7) setting DMX addresses, and (8) notes on addressing DMX chips. The controller can drive up to 2048 pixels across various color and chip types, and has options to play files, adjust speed, and loop or single play modes.

Uploaded by

Darshana Nissanka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

WWW.SOH.

CZ

LED Build and controller - SETUP

1. Features

(1). One port drives maximum 2048 pixels.

(2). SD card supports FAT32 and FAT16 format.

(3). Five working modes.

(4). Switch files, adjust speed and choose loop playback or single
playback by four buttons.

2. Product Display
WWW.SOH.CZ

3. Supported Driver Chips

LPD6803, LPD8806, LPD1882, LPD1889, LPD6812, LPD1883, LPD1886,


DMX512, HDMX, APA102, MY9221, UCS6909, UCS6912, UCS1903,
UCS1909, UCS1912, UCS8904, WS2801, WS2803, WS2811, WS2812,
TM1803, TM1804, TM1809, TM1812, TM1829, TA9912, TM1913,
TM1914, TM1926, TM1814, INK1003, LX1003, LX2003, LX2006,
TLS3001, P9813, P9816, SM16711, SM16716, LD151x, LD153x,
MBI6021, MBI6023, MBI6024 and so on.

Note: H801SB supports more than the chips listed above(some chips
have the same sequence diagram, for example UCS2903 has the same
sequence diagram with UCS1903, H801SB supports them all).

4. SD Card Control Mode Workflow

Step 1. Program with LED Build

LED Build download: http://download.soh.cz/ledbuild_setup_v4.0.rar

LED Build Tutorial Video:


https://vimeo.com/121423056
WWW.SOH.CZ

Place Pixels

Light Setting

Note: lots of chips share one option


WWW.SOH.CZ

Animation Make
WWW.SOH.CZ

Step 2. Output Controller Data

For more details of software, please refer to the video i post above.

Step 3. Connect strip to controller (the following is just for


example)

Test File Download: https://drive.google.com/open?


id=0B1gzqyV6hfOgTkRHRTR2dGswT0U (one port 200 pixels, for
WS2812 and other single line chips)
WWW.SOH.CZ

Button operation and indicator lights status

Power controller on.

With SD card inserted, green light is on and keeps still, red light is
flashing.

Without SD card, green and red light are on and all keep still.
WWW.SOH.CZ

5. Internal Control Mode Workflow


Step 1. Make file needed for this mode in LED Build
WWW.SOH.CZ

Step 2. Insert SD card, power controller on then off, take out SD


card, repower controller

Step 3. Connect your strip (chip type should be the same with
what you choose in step 1) to controller

There are 18 animations built-in, use four buttons to control them.


WWW.SOH.CZ

6. Connected to DMX Console

Note:

(1). In this mode, H801SB only supports the following chips

LPD6803, LPD8806, LPD1882, LPD1889, LPD1883, UCS6909, UCS6912,


UCS1903, UCS1909, UCS1912, WS2801, WS2811, WS2812, TM1803,
TM1804, TM1809, TM1812, TM1913, TM1914, TM1926, TM1814,
INK1003, LX1003, LX2003, LX2006, TLS3001, P9813, P9816, SM16711.

(2). Before power-on, you should insert SD card with DAT file, in which
includes pixels mapping, chip type, clock rate(all set in LED Build).
WWW.SOH.CZ

7. Multiple H806SBs work in synchrony for a big project


WWW.SOH.CZ

8. Set address for DMX512 chips


WWW.SOH.CZ

Note:

(1). In this mode SD card is not necessary.

(2). Press "LOOP/SINGLE" + "SPEED+", then loose them all, lights will
turn white then green, which means address is successful.

(3). Only after lights are repowered is address updated.

(4). can address for maximum 1024 pixels.

You might also like