Scribd
Upload
280 views1 page

S9A - Datasheet - Cooking Tank

This document provides specifications for a heat exchanger. It has a flowrate of 0.31 kg/s on the hot side and 60 m3/h on the cold side. The inlet temperatures are 130°C and 102°C and outlet temperatures are 130°C and 112°C for the hot and cold sides respectively. It is designed to exchange 671 kW of heat between steam and water. The heat exchanger has 32 plates arranged in 1 pass each way with a total effective heat exchange area of 3.08 m2. It is made of 0.5mm thick AISI 316 stainless steel with EPDM gaskets rated to 140°C.

Uploaded by

Phượng Nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
280 views1 page

S9A - Datasheet - Cooking Tank

This document provides specifications for a heat exchanger. It has a flowrate of 0.31 kg/s on the hot side and 60 m3/h on the cold side. The inlet temperatures are 130°C and 102°C and outlet temperatures are 130°C and 112°C for the hot and cold sides respectively. It is designed to exchange 671 kW of heat between steam and water. The heat exchanger has 32 plates arranged in 1 pass each way with a total effective heat exchange area of 3.08 m2. It is made of 0.5mm thick AISI 316 stainless steel with EPDM gaskets rated to 140°C.

Uploaded by

Phượng Nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sondex A/S PHE - Design & Datalist

___________________________________________________________________ V1044A
Anh Minh 4/23/2019
009 Item: 1
_____________________________________________________________________________
PHE-Type S9A-IG10-32-TM-STEAM Hot side Cold side
Flowrate (kg/s)/(m3/h) 0.31 60.00
Inlet temperature (°C) 130.00 102.00
Outlet Temp. Cond./Fluid (°C) 130.00 (129) 112.00
Pressure drop (bar) 0.02 / 60.47 0.89
Heat exchanged (kW) 671

Thermodynamic properties: Steam Water


Density (kg/m³) 953.63
Specific heat (kJ/kg*K) 4.22
Thermal conductivity (W/m*K) 0.68
Mean viscosity (mPa*s) 0.26
Wall viscosity (mPa*s) 0.21
Fouling factors (m²*K/kW) 0.00
Dimensioning factor % 1.33
Inlet branch F1 F3
Outlet branch F4 F2
_____________________________________________________________________________
Design of Frame / Plates:
Plate arrangement (passes*channel) 1 x 15 + 0 x 0
Plate arrangement (passes*channel) 1 x 16 + 0 x 0
Number of plates 32
Effective heat surface (m²) 3.08
Overall K-value Duty/Clean (W/m²*K) 9,621.19 9,748.89
Plate material 0.5 mm AISI 316
Gasket material / Max. temp. EPDM HT HANG ON (H) / 140
Max. design temperature (°C) 140.00
Max. Working/test pressure (bar) 10.00 13.00
Max. Differential pressure (bar) 10.00
Design according to PED 2014/68/EU(EN13445)
Liquid volume (liter) 9
Frame length (mm) 438 Max. No. of Plates 57
Net weight (kg) 138
Frame type IG
Connections HOT side : DN 65 Flange rubberlind HT PN10/PN16
Connections COLD side: DN 65 Flange rubberlind HT PN10/PN16
_____________________________________________________________________________
Category C2L BLUE RAL 5010

Sondex A/S Marsvej 5 DK-6000 Kolding


Tel: +45 76306100 Fax: +45 75538968/75505019

You might also like