Microprocessor

From Wikipedia, the free encyclopedia

Jump to: navigation, search

Intel 4004, the first general-purpose, commercial microprocessor

A microprocessor incorporates most or all of the functions of a computer's central

processing unit (CPU) on a single integrated circuit (IC, or microchip).[1] The first
microprocessors emerged in the early 1970s and were used for electronic calculators, using
binary-coded decimal (BCD) arithmetic on 4-bit words. Other embedded uses of 4-bit and 8-
bit microprocessors, such as terminals, printers, various kinds of automation etc., followed
soon after. Affordable 8-bit microprocessors with 16-bit addressing also led to the first
general-purpose microcomputers from the mid-1970s on.

During the 1960s, computer processors were often constructed out of small and medium-
scale ICs containing from tens to a few hundred transistors. The integration of a whole CPU
onto a single chip greatly reduced the cost of processing power. From these humble
beginnings, continued increases in microprocessor capacity have rendered other forms of
computers almost completely obsolete (see history of computing hardware), with one or more
microprocessors used in everything from the smallest embedded systems and handheld
devices to the largest mainframes and supercomputers.

Since the early 1970s, the increase in capacity of microprocessors has been a consequence of
Moore's Law, which suggests that the number of transistors that can be fitted onto a chip
doubles every two years. Although originally calculated as a doubling every year,[2] Moore
later refined the period to two years.[3] It is often incorrectly quoted as a doubling of
transistors every 18 months.

Contents
[hide]

 1 Firsts
o 1.1 Intel 4004
o 1.2 TMS 1000
o 1.3 Pico/General Instrument
 o 1.4 CADC
o 1.5 Gilbert Hyatt
o 1.6 Four-Phase Systems AL1
 2 8-bit designs
 3 12-bit designs
 4 16-bit designs
 5 32-bit designs
 6 64-bit designs in personal computers
 7 Multicore designs
 8 RISC
 9 Special-purpose designs
 10 Market statistics
 11 See also
 12 Notes and references
 13 External links

[edit] Firsts
Three projects delivered a microprocessor at about the same time: Intel's 4004, Texas
Instruments (TI) TMS 1000, and Garrett AiResearch's Central Air Data Computer (CADC).

[edit] Intel 4004

The 4004 with cover removed (left) and as actually used (right).

The Intel 4004 is generally regarded as the first microprocessor,[4][5] and cost thousands of
dollars.[6] The first known advertisement for the 4004 is dated November 1971 and appeared
in Electronic News.[7] The project that produced the 4004 originated in 1969, when Busicom,
a Japanese calculator manufacturer, asked Intel to build a chipset for high-performance
desktop calculators. Busicom's original design called for a programmable chip set consisting
of seven different chips. Three of the chips were to make a special-purpose CPU with its
program stored in ROM and its data stored in shift register read-write memory. Ted Hoff, the
Intel engineer assigned to evaluate the project, believed the Busicom design could be
simplified by using dynamic RAM storage for data, rather than shift register memory, and a
more traditional general-purpose CPU architecture. Hoff came up with a four–chip
architectural proposal: a ROM chip for storing the programs, a dynamic RAM chip for
storing data, a simple I/O device and a 4-bit central processing unit (CPU). Although not a
chip designer, he felt the CPU could be integrated into a single chip. This chip would later be
called the 4004 microprocessor.

The architecture and specifications of the 4004 came from the interaction of Hoff with
Stanley Mazor, a software engineer reporting to him, and with Busicom engineer Masatoshi
Shima, during 1969. In April 1970, Intel hired Federico Faggin to lead the design of the four-
chip set. Faggin, who originally developed the silicon gate technology (SGT) in 1968 at
Fairchild Semiconductor[8] and designed the world’s first commercial integrated circuit using
SGT, the Fairchild 3708, had the correct background to lead the project since it was SGT that
made it possible to implement a single-chip CPU with the proper speed, power dissipation
and cost. Faggin also developed the new methodology for random logic design, based on
silicon gate, that made the 4004 possible. Production units of the 4004 were first delivered to
Busicom in March 1971 and shipped to other customers in late 1971.

[edit] TMS 1000

The Smithsonian Institution says TI engineers Gary Boone and Michael Cochran succeeded
in creating the first microcontroller (also called a microcomputer) in 1971. The result of their
work was the TMS 1000, which went commercial in 1974.[9]

TI developed the 4-bit TMS 1000 and stressed pre-programmed embedded applications,
introducing a version called the TMS1802NC on September 17, 1971 which implemented a
calculator on a chip.

TI filed for the patent on the microprocessor. Gary Boone was awarded U.S. Patent 3,757,306
for the single-chip microprocessor architecture on September 4, 1973. It may never be known
which company actually had the first working microprocessor running on the lab bench. In
both 1971 and 1976, Intel and TI entered into broad patent cross-licensing agreements, with
Intel paying royalties to TI for the microprocessor patent. A nice history of these events is
contained in court documentation from a legal dispute between Cyrix and Intel, with TI as
intervenor and owner of the microprocessor patent.

A computer-on-a-chip is a variation of a microprocessor that combines the microprocessor

core (CPU), some program memory and read/write memory, and I/O (input/output) lines onto
one chip. The computer-on-a-chip patent, called the "microcomputer patent" at the time, U.S.
Patent 4,074,351, was awarded to Gary Boone and Michael J. Cochran of TI. Aside from this
patent, the standard meaning of microcomputer is a computer using one or more
microprocessors as its CPU(s), while the concept defined in the patent is more akin to a
microcontroller.

[edit] Pico/General Instrument

The PICO1/GI250 chip introduced in 1971. This was designed by Pico Electronics
(Glenrothes, Scotland) and manufactured by General Instrument of Hicksville NY

In 1971 Pico Electronics[10] and General Instrument (GI) introduced their first collaboration in
ICs, a complete single chip calculator IC for the Monroe/Litton Royal Digital III calculator.
This chip could also arguably lay claim to be one of the first microprocessors or
microcontrollers having ROM, RAM and a RISC instruction set on-chip. The layout for the
four layers of the PMOS process was hand drawn at x500 scale on mylar film, a significant
task at the time given the complexity of the chip.

Pico was a spinout by five GI design engineers whose vision was to create single chip
calculator ICs. They had significant previous design experience on multiple calculator
chipsets with both GI and Marconi-Elliott.[11] The key team members had originally been
tasked by Elliott Automation to create an 8 bit computer in MOS and had helped establish a
MOS Research Laboratory in Glenrothes, Scotland in 1967.

Calculators were becoming the largest single market for semiconductors and Pico and GI
went on to have significant success in this burgeoning market. GI continued to innovate in
microprocessors and microcontrollers with products including the PIC1600, PIC1640 and
PIC1650. In 1987 the GI Microelectronics business was spun out into the very successful PIC
microcontroller business.

[edit] CADC

This section needs references that appear in reliable third-party publications.

Primary sources or sources affiliated with the subject are generally not sufficient
for a Wikipedia article. Please add more appropriate citations from reliable sources.
(March 2010)

In 1968, Garrett AiResearch (which employed designers Ray Holt and Steve Geller) was
invited to produce a digital computer to compete with electromechanical systems then under
development for the main flight control computer in the US Navy's new F-14 Tomcat fighter.
The design was complete by 1970, and used a MOS-based chipset as the core CPU. The
design was significantly (approximately 20 times) smaller and much more reliable than the
mechanical systems it competed against, and was used in all of the early Tomcat models.
This system contained "a 20-bit, pipelined, parallel multi-microprocessor". The Navy refused
to allow publication of the design until 1997. For this reason the CADC, and the MP944
chipset it used, are fairly unknown.[12] Ray Holt graduated California Polytechnic University
in 1968, and began his computer design career with the CADC. From its inception, it was
shrouded in secrecy until 1998 when at Holt's request, the US Navy allowed the documents
into the public domain. Since then several[who?] have debated if this was the first
microprocessor. Holt has stated that no one has compared this microprocessor with those that
came later.[13] According to Parab et al. (2007), "The scientific papers and literature
published around 1971 reveal that the MP944 digital processor used for the F-14 Tomcat
aircraft of the US Navy qualifies as the first microprocessor. Although interesting, it was not
a single-chip processor, and was not general purpose – it was more like a set of parallel
building blocks you could use to make a special-purpose DSP form. It indicates that today’s
industry theme of converging DSP-microcontroller architectures was started in 1971."[14]
This convergence of DSP and microcontroller architectures is known as a Digital Signal
Controller.[citation needed]

[edit] Gilbert Hyatt

Gilbert Hyatt was awarded a patent claiming an invention pre-dating both TI and Intel,
describing a "microcontroller".[15] The patent was later invalidated, but not before substantial
royalties were paid out.[16][17]

[edit] Four-Phase Systems AL1

The Four-Phase Systems AL1 was an 8-bit bit slice chip containing eight registers and an
ALU.[18] It was designed by Lee Boysel in 1969.[19][20][21] At the time, it formed part of a nine-
chip, 24-bit CPU with three AL1s, but it was later called a microprocessor when, in response
to 1990s litigation by Texas Instruments, a demonstration system was constructed where a
single AL1 formed part of a courtroom demonstration computer system, together with RAM,
ROM, and an input-output device.[22]

[edit] 8-bit designs

The Intel 4004 was followed in 1972 by the Intel 8008, the world's first 8-bit microprocessor.
The 8008 was not, however, an extension of the 4004 design, but instead the culmination of a
separate design project at Intel, arising from a contract with Computer Terminals
Corporation, of San Antonio TX, for a chip for a terminal they were designing,[23] the
Datapoint 2200 — fundamental aspects of the design came not from Intel but from CTC. In
1968, CTC's Austin O. “Gus” Roche developed the original design for the instruction set and
operation of the processor. In 1969, CTC contracted two companies, Intel and Texas
Instruments, to make a single-chip implementation, known as the CTC 1201.[24] In late 1970
or early 1971, TI dropped out being unable to make a reliable part. In 1970, with Intel yet to
deliver the part, CTC opted to use their own implementation in the Datapoint 3300, using
traditional TTL logic instead (thus the first machine to run “8008 code” was not in fact a
microprocessor at all!). Intel's version of the 1201 microprocessor arrived in late 1971, but
was too late, slow, and required a number of additional support chips. CTC had no interest in
using it. CTC had originally contracted Intel for the chip, and would have owed them $50,000
for their design work.[24] To avoid paying for a chip they did not want (and could not use),
CTC released Intel from their contract and allowed them free use of the design.[24] Intel
marketed it as the 8008 in April, 1972, as the world's first 8-bit microprocessor. It was the
basis for the famous "Mark-8" computer kit advertised in the magazine Radio-Electronics in
1974.

The 8008 was the precursor to the very successful Intel 8080 (1974), which offered much
improved performance over the 8008 and required fewer support chips, Zilog Z80 (1976),
and derivative Intel 8-bit processors. The competing Motorola 6800 was released August
1974 and the similar MOS Technology 6502 in 1975 (designed largely by the same people).
The 6502 rivaled the Z80 in popularity during the 1980s.

A low overall cost, small packaging, simple computer bus requirements, and sometimes the
integration of extra circuitry (e.g. the Z80's built-in memory refresh circuitry) allowed the
home computer "revolution" to accelerate sharply in the early 1980s. This delivered such
inexpensive machines as the Sinclair ZX-81, which sold for US$99.

The Western Design Center, Inc. (WDC) introduced the CMOS 65C02 in 1982 and licensed
the design to several firms. It was used as the CPU in the Apple IIe and IIc personal
computers as well as in medical implantable grade pacemakers and defibrilators, automotive,
industrial and consumer devices. WDC pioneered the licensing of microprocessor designs,
later followed by ARM and other microprocessor Intellectual Property (IP) providers in the
1990s.

Motorola introduced the MC6809 in 1978, an ambitious and thought-through 8-bit design
source compatible with the 6800 and implemented using purely hard-wired logic.
(Subsequent 16-bit microprocessors typically used microcode to some extent, as CISC design
requirements were getting too complex for purely hard-wired logic only.)

Another early 8-bit microprocessor was the Signetics 2650, which enjoyed a brief surge of
interest due to its innovative and powerful instruction set architecture.

A seminal microprocessor in the world of spaceflight was RCA's RCA 1802 (aka CDP1802,
RCA COSMAC) (introduced in 1976), which was used onboard the Galileo probe to Jupiter
(launched 1989, arrived 1995). RCA COSMAC was the first to implement CMOS
technology. The CDP1802 was used because it could be run at very low power, and because a
variant was available fabricated using a special production process (Silicon on Sapphire),
providing much better protection against cosmic radiation and electrostatic discharges than
that of any other processor of the era. Thus, the SOS version of the 1802 was said to be the
first radiation-hardened microprocessor.

The RCA 1802 had what is called a static design, meaning that the clock frequency could be
made arbitrarily low, even to 0 Hz, a total stop condition. This let the Galileo spacecraft use
minimum electric power for long uneventful stretches of a voyage. Timers and/or sensors
would awaken/improve the performance of the processor in time for important tasks, such as
navigation updates, attitude control, data acquisition, and radio communication.

[edit] 12-bit designs

The Intersil 6100 family consisted of a 12-bit microprocessor (the 6100) and a range of
peripheral support and memory ICs. The microprocessor recognised the DEC PDP-8
minicomputer instruction set. As such it was sometimes referred to as the CMOS-PDP8.
Since it was also produced by Harris Corporation, it was also known as the Harris HM-
6100. By virtue of its CMOS technology and associated benefits, the 6100 was being
incorporated into some military designs until the early 1980s.

[edit] 16-bit designs

The first multi-chip 16-bit microprocessor was the National Semiconductor IMP-16,
introduced in early 1973. An 8-bit version of the chipset was introduced in 1974 as the IMP-
8.

Other early multi-chip 16-bit microprocessors include one used by Digital Equipment
Corporation (DEC) in the LSI-11 OEM board set and the packaged PDP 11/03 minicomputer,
and the Fairchild Semiconductor MicroFlame 9440, both of which were introduced in the
1975 to 1976 timeframe.

In 1975, National introduced the first 16-bit single-chip microprocessor, the National
Semiconductor PACE, which was later followed by an NMOS version, the INS8900.

Another early single-chip 16-bit microprocessor was TI's TMS 9900, which was also
compatible with their TI-990 line of minicomputers. The 9900 was used in the TI 990/4
minicomputer, the TI-99/4A home computer, and the TM990 line of OEM microcomputer
boards. The chip was packaged in a large ceramic 64-pin DIP package, while most 8-bit
microprocessors such as the Intel 8080 used the more common, smaller, and less expensive
plastic 40-pin DIP. A follow-on chip, the TMS 9980, was designed to compete with the Intel
8080, had the full TI 990 16-bit instruction set, used a plastic 40-pin package, moved data 8
bits at a time, but could only address 16 KB. A third chip, the TMS 9995, was a new design.
The family later expanded to include the 99105 and 99110.

The Western Design Center, Inc. (WDC) introduced the CMOS 65816 16-bit upgrade of the
WDC CMOS 65C02 in 1984. The 65816 16-bit microprocessor was the core of the Apple
IIgs and later the Super Nintendo Entertainment System, making it one of the most popular
16-bit designs of all time.

Intel followed a different path, having no minicomputers to emulate, and instead "upsized"
their 8080 design into the 16-bit Intel 8086, the first member of the x86 family, which powers
most modern PC type computers. Intel introduced the 8086 as a cost effective way of porting
software from the 8080 lines, and succeeded in winning much business on that premise. The
8088, a version of the 8086 that used an external 8-bit data bus, was the microprocessor in the
first IBM PC, the model 5150. Following up their 8086 and 8088, Intel released the 80186,
80286 and, in 1985, the 32-bit 80386, cementing their PC market dominance with the
processor family's backwards compatibility. The 8086 and 80186 had a crude method of
segmentation, while the 80286 introduced a full-featured semgented memory management
unit (MMU), and the 80386 introduced a flat 32-bit memory model with paged memory
management.

[edit] 32-bit designs

Upper interconnect layers on an Intel 80486DX2 die.

16-bit designs had only been on the market briefly when 32-bit implementations started to
appear.

The most significant of the 32-bit designs is the MC68000, introduced in 1979. The 68K, as it
was widely known, had 32-bit registers but used 16-bit internal data paths and a 16-bit
external data bus to reduce pin count, and supported only 24-bit addresses. Motorola
generally described it as a 16-bit processor, though it clearly has 32-bit architecture. The
combination of high performance, large (16 megabytes or 224 bytes) memory space and fairly
low cost made it the most popular CPU design of its class. The Apple Lisa and Macintosh
designs made use of the 68000, as did a host of other designs in the mid-1980s, including the
Atari ST and Commodore Amiga.

The world's first single-chip fully-32-bit microprocessor, with 32-bit data paths, 32-bit buses,
and 32-bit addresses, was the AT&T Bell Labs BELLMAC-32A, with first samples in 1980,
and general production in 1982[25][26] After the divestiture of AT&T in 1984, it was renamed
the WE 32000 (WE for Western Electric), and had two follow-on generations, the WE 32100
and WE 32200. These microprocessors were used in the AT&T 3B5 and 3B15
minicomputers; in the 3B2, the world's first desktop supermicrocomputer; in the
"Companion", the world's first 32-bit laptop computer; and in "Alexander", the world's first
book-sized supermicrocomputer, featuring ROM-pack memory cartridges similar to today's
gaming consoles. All these systems ran the UNIX System V operating system.

Intel's first 32-bit microprocessor was the iAPX 432, which was introduced in 1981 but was
not a commercial success. It had an advanced capability-based object-oriented architecture,
but poor performance compared to contemporary architectures such as Intel's own 80286
(introduced 1982), which was almost four times as fast on typical benchmark tests. However,
the results for the iAPX432 was partly due to a rushed and therefore suboptimal Ada
compiler.

The ARM first appeared in 1985. This is a RISC processor design, which has since come to
dominate the 32-bit embedded systems processor space due in large part to its power
efficiency, its licensing model, and its wide selection of system development tools.
Semiconductor manufacturers generally license cores such as the ARM11 and integrate them
into their own system on a chip products; only a few such vendors are licensed to modify the
ARM cores. Most cell phones include an ARM processor, as do a wide variety of other
products. There are microcontroller-oriented ARM cores without virtual memory support, as
well as SMP applications processors with virtual memory.

Motorola's success with the 68000 led to the MC68010, which added virtual memory support.
The MC68020, introduced in 1985 added full 32-bit data and address busses. The 68020
became hugely popular in the Unix supermicrocomputer market, and many small companies
(e.g., Altos, Charles River Data Systems) produced desktop-size systems. The MC68030 was
introduced next, improving upon the previous design by integrating the MMU into the chip.
The continued success led to the MC68040, which included an FPU for better math
performance. A 68050 failed to achieve its performance goals and was not released, and the
follow-up MC68060 was released into a market saturated by much faster RISC designs. The
68K family faded from the desktop in the early 1990s.

Other large companies designed the 68020 and follow-ons into embedded equipment. At one
point, there were more 68020s in embedded equipment than there were Intel Pentiums in
PCs.[27] The ColdFire processor cores are derivatives of the venerable 68020.

During this time (early to mid-1980s), National Semiconductor introduced a very similar 16-
bit pinout, 32-bit internal microprocessor called the NS 16032 (later renamed 32016), the full
32-bit version named the NS 32032. Later the NS 32132 was introduced which allowed two
CPUs to reside on the same memory bus, with built in arbitration. The NS32016/32
outperformed the MC68000/10 but the NS32332 which arrived at approximately the same
time the MC68020 did not have enough performance. The third generation chip, the
NS32532 was different. It had about double the performance of the MC68030 which was
released around the same time. The appearance of RISC processors like the AM29000 and
MC88000 (now both dead) influenced the architecture of the final core, the NS32764.
Technically advanced, using a superscalar RISC core, internally overclocked, with a 64 bit
bus, it was still capable of executing Series 32000 instructions through real time translation.

When National Semiconductor decided to leave the Unix market, the chip was redesigned
into the Swordfish Embedded processor with a set of on chip peripherals. The chip turned out
to be too expensive for the laser printer market and was killed. The design team went to Intel
and there designed the Pentium processor which is very similar to the NS32764 core
internally The big success of the Series 32000 was in the laser printer market, where the
NS32CG16 with microcoded BitBlt instructions had very good price/performance and was
adopted by large companies like Canon. By the mid-1980s, Sequent introduced the first
symmetric multiprocessor (SMP) server-class computer using the NS 32032. This was one of
the design's few wins, and it disappeared in the late 1980s. The MIPS R2000 (1984) and
R3000 (1989) were highly successful 32-bit RISC microprocessors. They were used in high-
end workstations and servers by SGI, among others. Other designs included the interesting
Zilog Z80000, which arrived too late to market to stand a chance and disappeared quickly.

In the late 1980s, "microprocessor wars" started killing off some of the microprocessors.
Apparently, with only one major design win, Sequent, the NS 32032 just faded out of
existence, and Sequent switched to Intel microprocessors.

From 1985 to 2003, the 32-bit x86 architectures became increasingly dominant in desktop,
laptop, and server markets, and these microprocessors became faster and more capable. Intel
had licensed early versions of the architecture to other companies, but declined to license the
Pentium, so AMD and Cyrix built later versions of the architecture based on their own
designs. During this span, these processors increased in complexity (transistor count) and
capability (instructions/second) by at least three orders of magnitude. Intel's Pentium line is
probably the most famous and recognizable 32-bit processor model, at least with the public at
large.

[edit] 64-bit designs in personal computers

While 64-bit microprocessor designs have been in use in several markets since the early
1990s, the early 2000s saw the introduction of 64-bit microprocessors targeted at the PC
market.

With AMD's introduction of a 64-bit architecture backwards-compatible with x86, x86-64

(also called AMD64), in September 2003, followed by Intel's near fully compatible 64-bit
extensions (first called IA-32e or EM64T, later renamed Intel 64), the 64-bit desktop era
began. Both versions can run 32-bit legacy applications without any performance penalty as
well as new 64-bit software. With operating systems Windows XP x64, Windows Vista x64,
Windows 7 x64, Linux, BSD and Mac OS X that run 64-bit native, the software is also
geared to fully utilize the capabilities of such processors. The move to 64 bits is more than
just an increase in register size from the IA-32 as it also doubles the number of general-
purpose registers.

The move to 64 bits by PowerPC processors had been intended since the processors' design in
the early 90s and was not a major cause of incompatibility. Existing integer registers are
extended as are all related data pathways, but, as was the case with IA-32, both floating point
and vector units had been operating at or above 64 bits for several years. Unlike what
happened when IA-32 was extended to x86-64, no new general purpose registers were added
in 64-bit PowerPC, so any performance gained when using the 64-bit mode for applications
making no use of the larger address space is minimal.

[edit] Multicore designs

Niagara 8 Core Processor

Main article: Multi-core (computing)
A different approach to improving a computer's performance is to add extra processors, as in
symmetric multiprocessing designs, which have been popular in servers and workstations
since the early 1990s. Keeping up with Moore's Law is becoming increasingly challenging as
chip-making technologies approach the physical limits of the technology.

In response, the microprocessor manufacturers look for other ways to improve performance,
in order to hold on to the momentum of constant upgrades in the market.

A multi-core processor is simply a single chip containing more than one microprocessor core,
effectively multiplying the potential performance with the number of cores (as long as the
operating system and software is designed to take advantage of more than one processor).
Some components, such as bus interface and second level cache, may be shared between
cores. Because the cores are physically very close they interface at much faster clock rates
compared to discrete multiprocessor systems, improving overall system performance.

In 2005, the first personal computer dual-core processors were announced and as of 2009
dual-core and quad-core processors are widely used in servers, workstations and PCs while
six and eight-core processors will be available for high-end applications in both the home and
professional environments.

Sun Microsystems has released the Niagara and Niagara 2 chips, both of which feature an
eight-core design. The Niagara 2 supports more threads and operates at 1.6 GHz.

High-end Intel Xeon processors that are on the LGA771 socket are DP (dual processor)
capable, as well as the Intel Core 2 Extreme QX9775 also used in the Mac Pro by Apple and
the Intel Skulltrail motherboard. With the transition to the LGA1366 and LGA1156 socket
and the Intel i7 and i5 chips, quad core is now considered mainstream, but with the release of
the i7-980x, six core processors are now well within reach.

[edit] RISC
Main article: Reduced instruction set computing

In the mid-1980s to early-1990s, a crop of new high-performance Reduced Instruction Set

Computer (RISC) microprocessors appeared, influenced by discrete RISC-like CPU designs
such as the IBM 801 and others. RISC microprocessors were initially used in special-purpose
machines and Unix workstations, but then gained wide acceptance in other roles.

In 1986, HP released its first system with a PA-RISC CPU. The first commercial RISC
microprocessor design was released either by MIPS Computer Systems, the 32-bit R2000
(the R1000 was not released) or by Acorn computers, the 32-bit ARM2 in 1987.[citation needed]
The R3000 made the design truly practical, and the R4000 introduced the world's first
commercially available 64-bit RISC microprocessor. Competing projects would result in the
IBM POWER and Sun SPARC architectures. Soon every major vendor was releasing a RISC
design, including the AT&T CRISP, AMD 29000, Intel i860 and Intel i960, Motorola 88000,
DEC Alpha.

As of 2007, two 64-bit RISC architectures are still produced in volume for non-embedded
applications: SPARC and Power ISA.
[edit] Special-purpose designs
A microprocessor is a general purpose system. Several specialized processing devices have
followed from the technology. Microcontrollers integrate a microprocessor with periphal
devices for control of embedded system. A digital signal processors (DSP) is specialized for
signal processing. Graphics processing units may have no, limited, or general programming
facilities. For example, GPUs through the 1990s were mostly non-programmable and have
only recently gained limited facilities like programmable vertex shaders.

[edit] Market statistics

In 2003, about $44 billion (USD) worth of microprocessors were manufactured and sold.[28]
Although about half of that money was spent on CPUs used in desktop or laptop personal
computers, those count for only about 0.2% of all CPUs sold.[citation needed]

About 55% of all CPUs sold in the world are 8-bit microcontrollers, over two billion of
which were sold in 1997.[29]

As of 2002, less than 10% of all the CPUs sold in the world are 32-bit or more. Of all the 32-
bit CPUs sold, about 2% are used in desktop or laptop personal computers. Most
microprocessors are used in embedded control applications such as household appliances,
automobiles, and computer peripherals. Taken as a whole, the average price for a
microprocessor, microcontroller, or DSP is just over $6.[30]

About ten billion CPUs were manufactured in 2008. About 98% of new CPUs produced each
year are embedded.[31]