Scribd
Upload
63 views

Chapter 1: Fundamentals of Power Electronics

This document discusses the fundamentals of power electronics, including the four main types of power electronic circuits: AC-DC converters, DC-AC inverters, DC-DC converters, and AC-AC converters. It also discusses power semiconductor devices, noting that power electronics has evolved due to improvements in semiconductor switches. Ideal semiconductor switches should have low power loss, fast switching times, require little power to turn on/off, be bidirectional, block voltage, and have adequate voltage and current ratings.

Uploaded by

basharfarhan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

Chapter 1: Fundamentals of Power Electronics

This document discusses the fundamentals of power electronics, including the four main types of power electronic circuits: AC-DC converters, DC-AC inverters, DC-DC converters, and AC-AC converters. It also discusses power semiconductor devices, noting that power electronics has evolved due to improvements in semiconductor switches. Ideal semiconductor switches should have low power loss, fast switching times, require little power to turn on/off, be bidirectional, block voltage, and have adequate voltage and current ratings.

Uploaded by

basharfarhan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Chapter 1: Fundamentals of power electronics

(1) AC-DC (Rectifiers) : Circuits for converting a.c. voltage to d.c.


voltage or transfer of power from an alternating current (a.c.) supply
to direct current (d.c.) form. These circuits can be of two main types:
(a) AC-DC (Uncontrolled)
(b) AC-DC (Controlled)

(2) DC-AC (Inverters) : Circuits for converting a d.c. voltage to an


alternating one or transfer of power from a direct current supply to
alternating current form. The output power can be at any desired
volage and /or frequency.

(3) DC-DC Converters : Circuits change a fixed d.c. voltage into a


variable d.c. supply, i.e. transfer of power from a direct current supply
directly into a direct current load of different voltage level. These
types of converters are usually called d.c. choppers.

(4) AC-AC Converters : Circuits change a fixed a.c. voltage into a


variable a.c. supply, i.e. transfer of power from an alternating current
supply directly into an alternating current load of different voltage
level at fixed frequency or variable frequency. These converters are
usually of two types:
(a) AC voltage controllers: Change the a.c. supply voltage magni-
tude only keeping the frequency unchanged.
(b) Cycloconverters or matrix converters: Change the a.c. supply
directly to a variable a.c. supply both in magnitude and
frequency (also called static frequency changers).

1.3 POWER SEMICONDUCTOR DEVICES


Power electronics evolution is a result of the evolution of power
semiconductor devices. The Power semiconductor switches are the work-
horses of power electronics (PE). There are several power semiconductor
devices currently involved in several industrial applications. PE switches
work in two states only: Fully on (conducting), and fully off (blocking).
Switches are very important and crucial components in power electronic
systems. The ideal or good switch must have the following characteristics:

 Very low or negligible power loss during turning ON or OFF.


 Switching times between ON and OFF states should be very low.
 Small power required to turn it ON or OFF.
 Bidirectional and voltage blocking capability.
 Adequate voltage and current ratings.

Practical power semiconductor switches are not perfect. They usually


have a very low on-state resistance that result in conduction voltage drop

You might also like