Scribd
Upload
150 views1 page

High-Side Power Distribution Switch: Features General Description

The G5244 is a 120mΩ high-side power switch with current limiting and protection features for USB power applications. It has a built-in charge pump to drive the MOSFET and eliminate reverse current when powered off. Protection features like current limiting and thermal shutdown prevent failures from heavy loads or shorts. Its low power consumption and small packages make it suitable for battery-powered devices.

Uploaded by

Rafael Roel Robles Baez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views1 page

High-Side Power Distribution Switch: Features General Description

The G5244 is a 120mΩ high-side power switch with current limiting and protection features for USB power applications. It has a built-in charge pump to drive the MOSFET and eliminate reverse current when powered off. Protection features like current limiting and thermal shutdown prevent failures from heavy loads or shorts. Its low power consumption and small packages make it suitable for battery-powered devices.

Uploaded by

Rafael Roel Robles Baez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Global Mixed-mode Technology G5244

High-Side Power Distribution Switch


Features General Description
 120mΩΩ High-Side MOSFET The G5244 is an 120mΩ power switch for
 2.5A of Current Limits with Foldback self-powered and bus-powered Universal Serial Bus
 Operating Range:2.7V to 5.5V (USB) applications.
 1.9ms Typical VOUT Turn-On Rise Time
Several Protection features such as current limiting
 Under voltage Lockout
with foldback, and thermal shutdown are included to
 65µA Quiescent Supply Current
prevent catastrophic switch failure caused by increas-
 1µA Maximum Standby Supply Current
ing power dissipation when continuous heavy loads or
 Active-High Enable Pin
short circuit occurs. A built-in charge pump is used to
 No Reverse Current when Power Off
drive the N-channel MOSFET that makes it free of
 Shutdown Discharge Function at DSG Pin
parasitic body diode to eliminate any reversed current
 SOT-23-5 and ADFN1.5X1.5-6 Package Available
flow across the switch when it is powered off. The
G5244 has a shutdown discharge function when
Applications power switch is turned off. User could realize the shut-
 High-Side Power Protection Switch down discharge function by adding an external resistor
 USB Power Management between OUT PIN and DSG PIN.
 USB Host and Self-Powered Bubs
Its low quiescent supply current and small package
 USB Bus-Powered Hubs
SOT-23-5 and ADFN1.5X1.5-6 is particularly suitable
 Hot Plug-In Power Supplies
in battery-powered equipment, like PDA, mobile phone.
 Battery-Charger Circuits

Ordering Information
ORDER TEMP. PACKAGE
MARKING
NUMBER RANGE (Green)
G5244T11U 5244x -40°C to +85°C SOT-23-5
54
G5244A31U -40°C to +85°C ADFN1.5X1.5-6
xx
Note: T1: SOT-23-5 A3: ADFN1.5X1.5-6
1: Bonding Code
U: Tape & Reel

Pin Configuration Typical Application Circuit

G5244
G5244
G5244 VIN IN DSG
OUT 1 5 IN Shutdown
IN 1 6 OUT Discharge
Resistor
GND 2 NC 2 5 GND EN OUT
GND VOUT
ON
CIN
DSG 3 4 EN
1µF OFF COUT
EN 3 4 DSG 4.7µF
ADFN1.5X1.5-6
SOT-23-5

Ver 0.4 TEL: 886-3-5788833


Oct 05, 2011 http://www.gmt.com.tw
1

You might also like