0% found this document useful (0 votes)
115 views2 pages

Accelerometer: 1 Conical Angle 90°

This document provides specifications for the VSA001 Accelerometer Vibration Sensor. The sensor measures vibration in a range of -25 to 25g and frequencies from 0 to 6000Hz using capacitive sensing. It has an analog current output of 0 to 10mA, operates from 7.2 to 10.8VDC, and is IP67 rated for water and dust resistance. Key features include high insulation resistance, reverse polarity protection, and high shock and vibration tolerance.

Uploaded by

dungdhts
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
115 views2 pages

Accelerometer: 1 Conical Angle 90°

This document provides specifications for the VSA001 Accelerometer Vibration Sensor. The sensor measures vibration in a range of -25 to 25g and frequencies from 0 to 6000Hz using capacitive sensing. It has an analog current output of 0 to 10mA, operates from 7.2 to 10.8VDC, and is IP67 rated for water and dust resistance. Key features include high insulation resistance, reverse polarity protection, and high shock and vibration tolerance.

Uploaded by

dungdhts
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VSA001

Accelerometer
VIBRATION SENSOR

1 conical angle = 90°

Product characteristics
Measuring range of vibration [g] -25...25
Frequency range [Hz] 0...6000
Measuring principle capacitive
Application
Design for connection to external diagnostic electronics VSE
Application vibration detection
Electrical data
Operating voltage [V] 7.2...10.8 DC; (cULus: 9 V DC)
Current consumption [mA] < 15
Min. insulation resistance [MΩ] 100; (500V DC)
Protection class III
Reverse polarity protection yes
Type of sensor Microelectromechanical system (MEMS)
Outputs
Analog current output [mA] 0...10
Max. load [Ω] 300
Measuring/setting range
Measuring range of vibration [g] -25...25
Frequency range [Hz] 0...6000
Measuring principle capacitive
Sensitivity [µA/g] 142
Number of measurement
1
axes
Accuracy / deviations
Linearity deviation 0,2 %
Operating conditions
Ambient temperature [°C] -30...125
Note on ambient temperature cULus: < 85 °C
Storage temperature [°C] -30...125
Protection IP 67; IP 68; IP 69K

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — VSA001-03 — 08.10.2015 —
VSA001
Accelerometer
VIBRATION SENSOR

Tests / approvals
EN 61000-6-2
EMC EN 61000-6-3
EN 50178
Shock resistance DIN EN 60068-2-27 50 g 11 ms
Vibration resistance DIN EN 60068-2-6 20 g / 10 ... 2000 Hz
MTTF [years] 1701
Mechanical data
Weight [g] 50
Type of mounting M8 x 1,25
Material housing: stainless steel (1.4404 / 316L)
Tightening torque [Nm] 8
Mechanische
[g] 500
Überlastfestigkeit
Accessories
Accessories (optional) washers: 5, conical, E30115
Remarks
Pack quantity 1 pcs.
Electrical connection

1 L+ (+9 V)
2 I out
3 GND
4 Test

Connector: 1 x M12; Maximum cable length: 250 m

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — VSA001-03 — 08.10.2015 —

You might also like