Scribd
Upload
344 views1 page

How To Convert Waypoints For Passage Plan

After exporting a route plan from the Transas Integrator software to a USB drive, open the exported file on a computer. Copy the waypoint column into a new sheet and use the "Text to Columns" feature to separate the waypoint values delimited by spaces and degrees symbols into individual columns. Then transfer each column of separated waypoint values into the waypoint database of the passage plan.

Uploaded by

Alin Marius Ciurea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
344 views1 page

How To Convert Waypoints For Passage Plan

After exporting a route plan from the Transas Integrator software to a USB drive, open the exported file on a computer. Copy the waypoint column into a new sheet and use the "Text to Columns" feature to separate the waypoint values delimited by spaces and degrees symbols into individual columns. Then transfer each column of separated waypoint values into the waypoint database of the passage plan.

Uploaded by

Alin Marius Ciurea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
You are on page 1/ 1

How to convert waypoints for passage plan

1. After completing the route in “Route planning” & check -> EXPORT ROUTE as EXCEL - > Transfer to
USB drive (Transas Integrator -> Data Tool -> (Left side)Select 1 st box Route & 2nd box Route To
Export -> (Right Side) Select drive /:E-> “Move” to USB Drive)

2. Open the exported route in Computer -> Create New Sheet -> Copy Waypoints column in the new
Sheet -> Select column of the waypoints ->

From the Menu Bar (upper part) Select “Data –> Text to Colums”

-> Select “Delimited -> Select “Space” and “Others” and fill up the box with “ ° ” (ALT+0176=°)
->Next -> Finish

3. Transfer column by column the values into Passage Plan “Waypoint Data Base”

You might also like