For the latest prices, please check AutomationDirect.com.

How many other companies offer

a money-back guarantee on software?
DirectSOFT6 programs What’s New in makes it super easy to create and edit
your program docu­menta­tion on the fly
the entire DirectLOGIC DirectSOFT6? • I/O cross-reference and element usage
windows keep track of addresses used
family • Over 40 new IBoxes available
• Print Preview to check print formatting
PC-DSOFT6 is our DirectLOGIC PLC • Configurable toolbars
• Print in COLOR
programming package, with a host of • Extremely fast status updates • Open a Data View to examine a status
features that make it easier to program • New Trend View feature for monitoring chart of information you select
your PLC. It supports full-featured 32-bit and debugging (seen below) • PID setup is a snap. Fill-in-the-blanks for
Windows-based program­ming for all six • Graphic Ladder View alarms, mode, ramp/soak, process vari-
DirectLOGIC PLC families simultane­ • Ladder box leg labels
able, setpoint, gain rate, etc.
ously, including all DL05s, DL06s, • PID loop tune and trending screens are
• Graphic Stage View standard
DL105s, DL205 CPUs, DL305 CPUs,
DL405 CPUs, and most of their Koyo • Modem support is a snap since it uses the
cousins. The software supports a wide What else is included? standard Windows telephony (TAPI)
interface to choose modem configuration
array of on-line/off-line programming • IBoxes have packetized fill-in-the-blank-
and docu­men­ta­tion features, as well as style instructions that make writing your • Our drum timers are the easiest to create
program faster and easier (certain CPUs and edit in the industry
IBox instructions.
and firmware required) • Programming support for all DirectLOGIC
Packages include: • Tabbed views optimize your viewing area CPUs
• P C-DS100/version 6 (FREE): so you see more of what you need to see • ASCII in/out and MODBUS instructions for
DirectSOFT100 programming pack- • Customizable tool bars give you the DL06 and D2-262 CPUs
age; programs up to 100 words in any flexibility to put what you need where you • Support for DL205 local I/O expansion
DirectLOGIC CPU want it system in D2-262 and DL-405 CPUs
• P C-DSOFT6 is the full programming • Dockable windows give you the ability to • Support for LCD instructions in the DL06
package for all DirectLOGIC PLCs with no relocate views, auto-hide views and even CPU
programming limitations, at one low price tear them away and place them outside of
$417.00 • Project backup feature and preferences
the DirectSOFT6 workspace for full ladder with auto-backup settings for “file
• PC-R60-U upgrade to Version 6 with viewing optimization freshen” frequency
complete DirectLOGIC CPU support from • Learn many features and software
any older purchased version • I mport/export program (mnemonics and
shortcuts with the “Tip of the Day” in rung comments) allows for archiving a
$263.00 DirectSOFT6 program in a single file (txt or CSV) that
• Edit programs as fast as you can move a does not need to be in the form of a
Technicians like it mouse or use ‘hot keys’ (even faster) DirectSOFT6 file(s) format
• Write your program with nicknames
when you use our instead of data points
• E xport to C-more operator interface
CSV import format (nickname, type, PLC
programming and • View your program three different ways
(RLL, Stage View, Mnemonics). Select the
address) to use the same tags in our PLC
program and operator interface
documentation tools appropriate Tab or view them all on the configuration
A well-documented program can save same screen
thousands of dollars in downtime when • Reduced scan time by scanning
only active stages
something breaks, but not all packages
make it easy to document the program. •Spreadsheet-style documentation editor
Use our grid-based documentation editor
to quickly and intuitively create rung
comments, 16-character element nick-
names, 6 x 19-character element descrip-
tions, and 16-character wiring labels.

Program over Ethernet

You can program one or multiple
DirectLOGIC PLCs from one location over
an Ethernet network. Just insert an ECOM
100 module in supported DL05, DL06,
DL205 and DL405 systems to monitor
and program at warp speed! An Ethernet
setup wizard leads you through the steps
to make the connection to your PLCs.

mDLV-4 DirectLOGIC PLC Overview 1-800-633-0405

For the latest prices, please check AutomationDirect.com.

DirectSOFT6 for DirectLOGIC PLCs

DirectSOFT6 makes programming
your PLC easy and fast
We have taken the guesswork out of everyday program-
ming with IBox instructions. The IBox instructions are
intelligent modularized instructions that perform simple to
complex ladder logic. If you need to set up an Analog
card just fill in the blanks; If you need to perform a math
function on a value, simply type in your formula; select a
new preset for your High Speed Counter (CTRIO); even
send an e-mail with your ECOM100 Ethernet communi-
cations module! Take a minute to view the IBox Instruction
Help index to see detailed specifications of each of the
105 instructions, review which CPUs support the IBox
instructions or just get familiar with what they can do for
you. Other features include:
• Point and click or function key editing to suit anyone’s
programming style
• Customizable Tool Bars for EVERY menu command
•D  esktop Themes to allow you to customize your window
and tool bar look & feel
•A  ll toolbars can be docked to any border or even floated
outside of the DirectSOFT window for maximum ladder
viewing
• Write your program with nicknames instead of data points
• I /O cross reference and element usage windows keep track
of addresses used
• S et up the D0-DCM for the DL05 & DL06 right from the menu.
PLC > Setup > D0-DCM allows you to configure each of the
two serial ports, no ladder code required

The 40+ new IBoxes in DirectSOFT6 are compatible with

DirectLOGIC DL05, DL06, D2-262 and D4-450 CPUs
that have supporting firmware, as well as with the new
D4-454 CPU. IBox instruction categories include Memory,
Discrete Helper, Analog Helper, Math, Communications,
and CTRIO.
NOTE: Using Ibox instructions can increase the program size and PLC scan
time.

Stage programming keeps the

sequence in order
RLLPLUS Stage programming can help break a control
problem into smaller pieces and provide such benefits as:
• Stages divide the ladder program into sections that
correspond to the states in a flowchart of your process
• Stages help make large programs more manageable by
giving them some structure
• Reduce scan time by scanning only the active stages


NOTE: For current operating system requirements, please visit

the DirectSOFT6 software page at www.AutomationDirect.com

www.automationdirect.com/directlogic-plcs DirectLOGIC PLC Overview mDLV-5

 For the latest prices, please check AutomationDirect.com.

DirectSOFT6 Packages for DirectLOGIC PLCs

Programming
software
PC-DSOFT6 $417.00
PC-DS100 $0.00

Overview
DirectSOFT6 Programming Software has
been designed to make DirectLOGIC PLC
programming easier than ever before.
The 32-bit Windows-based package Flexible configuration allows you to customize the look and feel of the software to suit your needs and desires.
provides simple menu and icon choices
that operate similarly to those found in
Laptop/portable Maintenance releases
most standard Windows packages. With computers and You can receive maintenance releases
at no charge by downloading them from
DirectSOFT6 you can have the power of off-site usage our Web site. These often include some
Windows on the factory floor. Many of you may be using laptop minor feature enhancements along with
To download our free version, please visit computers for field service work. This is software corrections.
our Web site at: perfectly acceptable as long as it adheres
to the guidelines described previously.
www.automationdirect.com/directsoft Software upgrades
PC-R60-U $263.00
Which package is right Can I ship a copy to my Any release that contains major feature
for you? customer? enhancements will be subject to the
The programming software packages No, except for a single backup copy, you normal upgrade charge in effect at that
share the same general features, but cannot make, install, or distribute any time. The DirectSOFT6 upgrade part
there are a couple of key differences: additional copies. You can transfer the number is PC-R60-U.
PC-DSOFT6 programs all six CPU families original copy (original CD, any appli- Note: This upgrade will update any older packages
that are already installed on your system to a full
(DL05, DL06, DL105, DL205, DL305 and cable upgrades, and any documentation)
programming package with all CPU support.
DL405). by taking advantage of our Web registra-
PC-DS100 is a free, full-feature software tion and ownership transfer site.
package that allows a maximum of 100
words for programming, editing, and Of course, this means you cannot legally
downloading. Larger programs can be keep a copy once you have transferred
created and saved but NOT reopened or the original.
downloaded without purchasing the full
version.

Number of users
The packages listed above are really
“single-station” packages. That is, you
can legally install them on only one
computer. However, if there is only one
person who primarily uses the computer
(over 80% of the time), then you can
install the software on a laptop, home
office, or any other single backup
computer.

mDLV-6 DirectLOGIC PLC Overview 1-800-633-0405

For the latest prices, please check AutomationDirect.com.

DirectSOFT6 Features
Program editing features Printing features Online operation
• “Tip of the Day” gives you programming • Print any available view, including
ladders, charts, and mnemonics
features
guidance, information on shortcuts and • Online help system with supported CPU
tips for taking advantage of features • Print multiple columns instruction list
• Full-screen Point and Click Editing with • Use zoom to enlarge or reduce print size • DSLaunch as a central manager for all
the mouse and icons • Preview the printouts before you send projects, links, and applications
• Edit Tool Box contains icons and hot key them to the printer • Automatically build and store
equivalents for all elements • Create custom printouts by selecting communication links to the PLC,
• Browsers help you find proper exact items to include for each view even using modems or Ethernet
addresses, contacts, coils, and box • Print program documentation, including • Visible indication of PLC communication
instructions nicknames, descriptions, rung link status
• Project Information data with each comments, etc. • Status mode provides visible power flow
project including creation and save • Print program Cross Reference or condition for program elements, current
dates, links, PLC type, project description Element Usage Table values for timers and counters, and
and version, and company/ department/ current values for V-memory or Data
programmer • Print PLC V-memory or Data Register Register locations. Event status for Drum
contents steps, outputs, event and/or time
• On-screen Cross Reference in a tabbed
view that automatically tracks program transitions, etc.
elements as you browse the ladder view
• On-screen Element Usage in groups of 8,
Display and • Custom configure Data View windows to
monitor various elements
10, or 16 points per line viewing features • Display nicknames in Data View
• Predefined aliases for common items, •Tabbed views allow you to easily switch • Save and store Data View windows by
such as timer and counter current values between views and optimize your name
viewing area
• Enter your program with nicknames and • Choose data format for Data View
assign them to addresses later • View program ladders Window display (BCD, binary,
• Access V-memory (Data Registers) with • Customizable desktop themes, display Hexadecimal, etc.)
fill-in-the-blank Memory Editor colors for editing, unsaved changes, • Choose status symbol (switch, text, etc.)
documentation, etc. for discrete points in Data View windows
• Easily cut and paste single rungs or
groups of rungs • View program mnemonics • Change PLC values from Data View
• Cut and paste rungs (with documenta- • Stage view available for programs windows
tion) between programs created with RLLPLUS instructions • View multiple PLCs simultaneously
• Search for program elements by name, • Choose rung number or addresses for (Ethernet)
address, rung number, or instruction type ladder view
• Search for constants • View multiple programs at the same time
• View multiple screens at once
Maintenance and
Documentation features • Use split screen to view different debugging
sections of the same program • Automatic error checking during
• I mport/export program mnemonics and program entry
rung comments to a text file that does not • Use zoom to enlarge or reduce the screen
have to be in DirectSOFT format area for better viewing • Program syntax check
• E xport (nickname, type, PLC address) to • Monitor PLC scan time
C-more in CSV format
•G  rid-based documentation editor for
System setup features • Perform PLC I/O diagnostics
• D0-DCM Setup menu is available for the • View PLC errors and/or user error
easy access messages
DL05 and DL06 data communications
• 16-character nicknames for addresses module • Project user backup and auto
make troubleshooting and programming back-up facilities
easier • Set up PID loops with easy-to-use dialog
boxes • Visually monitor data values using
• 16-character wiring information allows the Trend View feature
you to tie PLC addresses to panel wiring • Set PLC communication parameters
numbers through PC ports, modems, or Ethernet
• 6-line x 19-character address description • Change PLC mode of operation
provides more detailed information • Clear PLC memory by type or all
about the program element
• Select or change retentive memory
• Rung comments can be up to 20 lines of ranges
70 characters each
• Read PLC I/O configuration
• Cut, copy, and paste documentation
between program elements • Change I/O configuration (if allowed by
the PLC)
• Free-form program title page can be
selected at time of printing • View PLC firmware revisions
• Import/Export feature for all
documentation

NOTE: For current operating system requirements, please visit the DirectSOFT6 software page at www.AutomationDirect.com

www.automationdirect.com/directlogic-plcs DirectLOGIC PLC Overview mDLV-7

 For the latest prices, please check AutomationDirect.com.

DirectSOFT6 Functions
Click to start
programming
The Launch Window
Utilities, such as The Launch Window is a centralized location to view not only
CTRIO WB all of your DirectSOFT6 applications and projects, but also any
additional applications such as NetEdit, DN Loader, CTRIO WB,
ERM WB, etc. This window is also used to create and manage
PLC programs and the communications between your PC and
the PLC.
Installed support
Documents —
(Projects most recently
used listed first)

Communication links to PLCs

Point and click editing

Once you have started a new project, there are a few different ways to
start building your program. The Ladder Palette, which is attached to the
right border by default, can be resized and repositioned anywhere on your
desktop. This contains most of the instructions you will need. Simply click
on the icon or use the Hot Key associated with that icon. Some instruc-
tions have to be accessed through one of the Browser icons. The Browsers
contain all of the necessary information from various boxes, coils, and
contacts. You can now customize the Ladder Palette tool bar to fit your
programming style and needs.

Ladder Palette
Description, Wiring Info, Nickname, Element Enter documentation information for each instruction/element.
Edit and review all documentation

Documentation
Documentation is the text associated with the components and
structure of your program. It helps to clarify the representation
of elements by assigning four different fields: Description, Wiring
Info, Nickname, and Element.

You can have multiple

views of your project

Onscreen views visible at the same

time. This screen shows
DirectSOFT6 defaults to a Tab view to give you the most optimized viewing area. the Ladder View, Usage
View, Mnemonic View
You still have the option to view multiple windows in the original “MDI” format by and XRef View.
simply hitting the Restore button in the upper right of the active tabbed window,
or go to Windows menu and select one of the tile or cascade options. You can
have multiple windows open to view such things as all of the addresses used in the
program, a mnemonic view of the program instructions, and all of the instructions
used.

mDLV-8 DirectLOGIC PLC Overview 1-800-633-0405

For the latest prices, please check AutomationDirect.com.

DirectSOFT6 Functions

Support for drum instructions

If your PLC supports Drum instructions, you will like this feature of the programming
software. Simply fill in the top of the drum with outputs and configure each step with
an event and/or time-based element. Then click on the output boxes to choose the
proper output states for each step and you are finished.

PID view
DirectSOFT6 offers an excellent PID feature. The loop and trending screens
are very easy to configure. This feature has all of the views, trending, and
tuning that you need to easily and successfully set up your PID loop.

Trend view
DirectSOFT6 contains a new debugging tool called Trend View.
Trend View is used to visually monitor the values of DL controller
data elements over time. The Trend View can monitor any readable
numeric location, any readable bit location or any constant value.

I-Box Instructions
IBox instructions are parameterized fill-in-the-blank instructions designed to
make your programming experience quicker and easier than ever before.
Within these IBoxes you will find some complicated and some simple,
everyday ladder code tasks made easy and fast. There are 6 categories,
including Memory, Discrete Helper, Analog Helpers, Math, Communications
& Counter I/O, with 105 instructions to choose from. Here are a few exam-
ples of IBox instructions in DirectSOFT6 …
MOVER - Copies a 32-bit floating point number that is stored in two consec-
utive V-Memory locations to the specified location which is also two consec-
utive V-Memory location
OFFDTMR - Off Delay Timer will delay the “turning off” of the Output
parameter by the specified Off Delay Time
ABSR - Returns the absolute value of the Real (floating point) number found
in the specified V-Memory locations
ANLGCMB - Analog Input/Output Combo Module Pointer Setup generates
the logic to configure the pointer method for one analog input/output combo
module on the first PLC scan following a Program to Run transition.
MATHBCD - Math - BCD Format lets you enter complex mathematical
expressions like you would in Visual Basic, Excel, or C++

www.automationdirect.com/directlogic-plcs DirectLOGIC PLC Overview mDLV-9

 For the latest prices, please check AutomationDirect.com.

Programming for DirectLOGIC PLCs

The FREE DirectSOFT6 package
Programming versions (PC-DS100) was designed to provide
PLC compatibility
With DirectSOFT6 Programming Software, a more streamlined choice. You can If you’re using our DirectLOGIC prod-
selecting which software package you see from the table below that the FREE ucts, then compatibility is not an issue.
need is a snap! You can select the fully version has the same support and same The DirectSOFT6 package supports all
loaded package at its great low price, or great features, but will only allow you to DirectLOGIC CPUs. Our software also
you may choose the FREE package. It has open or download a program up to 100 supports many compatible products that
all of the same programming functions words long. were offered by previous vendors of the
as the full package. However, it will only Koyo-designed PLCs. If you’re buying
Also, you cannot open an offline project
download a program up to 100 words the software to program a compatible
larger than 100 words. You can create a
long. CPU, check the following table to make
project as large as you want and save it
The fully-loaded version (PC-DSOFT6) sure your CPU is supported. (Sorry, but
to disk, but you cannot reopen or down-
will program all of our DirectLOGIC if your CPU is not shown, then it is not
load it to a PLC without purchasing the
PLCs, some GE Series One Plus PLCs, supported.)
full version (PC-DSOFT6).
and TI305/405 SIMATIC PLCs. Refer to
the chart below to verify compatibility.

DirectSOFT6 DirectSOFT6 CPU Firmware Version

Family CPU (full version) (free version) Needed to Use IBox
PC-DSOFT6 PC-DS100* Instructions

DL05 All 4 4 4 CPU v5.10 or Later

DL06 All 4 4 4 CPU v2.10 or Later
DL105 All 4 4
D2-230 4 4
D2-240 4 4
D2-250 4 4
DL205
D2-250-1 4 4 4 CPU v4.60 or Later
D2-260 4 4 4 CPU v2.40 or Later
D2-262 4 4
D3-330**, D3-330P** 4 4
DL305 D3-340 4 4
D3-350 4 4
D4-430 4 4
D4-440 4 4
DL405
D4-450 4 4 4 CPU v3.30 or Later
D4-454 4 4
IC610CPU105** 4 4
GE® Series 1 PLUS
IC610CPU106** 4 4
325-07**, PPX:325-07** 4 4
330-37**, PPX:330-37** 4 4
TI305™/ SIMATIC® 325S-07** (or 325 with Stage Kit) 4 4
TI305™
330S-37**, PPX:330S-37** 4 4
335-37, PPX:335-37 4 4
425-CPU, PPX:425-CPU 4 4
TI405™/ SIMATIC® PPX:430-CPU 4 4
TI405™
435-CPU, PPX:435-CPU 4 4
PZ1 4 4
PZ2 4 4
PZ3 4 4
SC-4X 4 4
SG-8/8B 4 4
Koyo Kostac S-Series SL-4 4 4
SU-5/5E/5M 4 4
SU-6/6B/6H/6M 4 4
SZ-3 4 4
SZ-4/4M 4 4
TJ-435/435-AS 4 4
* PC-DS100 is only available by download from our Website. This FREE, full-featured software package will download a program limited to 100 words.
** Requires Data Communications Unit (D3-232-DCU).

mDLV-10 DirectLOGIC PLC Overview 1-800-633-0405

For the latest prices, please check AutomationDirect.com.

Programming for DirectLOGIC PLCs

Connecting to DirectLOGIC PLCs

DL05 CPUs
Port 1: 9.6 Kbaud
Port 2: 300 baud-38.4 Kbaud

DL06 CPUs
Port 1: 9.6 Kbaud
Port 2: 300 baud - 38.4K baud

DL105 CPUs
Port 1: 9.6 Kbaud

DL205 CPUs
D2-230: Port 1: 9.6 Kbaud
D2-240: Port 1: 9.6 Kbaud
Port 2: 300 baud - 19.2 Kbaud
D2-250-1: Port 1: 9.6 Kbaud
D2-260: Port 2: 300 baud - 38.4 Kbaud
D2-262: Port 2: 300 baud - 38.4 Kbaud

DL305 CPUs
D3-330 (requires D3-232-DCU): 300 - 19.2 Kbaud
D3-340: Port 1/2: 300 baud - 38.4 Kbaud
D3-350: Port 1: 9.6 Kbaud
Port 2: 300 baud - 38.4 Kbaud

DL405 CPUs
D4-430: Port 1: 9.6 Kbaud
&D4-440: Port 2: 300 baud - 19.2 Kbaud
D4-450: Port 0: 9.6 Kbaud
Port 1/3: 300 baud - 38.4 Kbaud
Port 2: 300 baud - 38.4 Kbaud
D4-454: Port 0: 9.6 Kbaud
Port 1/3: 2.4 Kbaud - 38.4 Kbaud
Port 2: 2.4 Kbaud - 38.4 Kbaud
Or use an Hx-ECOM100 module in the DL05, DL06, DL205 (except D2-230) or
DL405 local base to program over a high-speed Ethernet link.

www.automationdirect.com/directlogic-plcs DirectLOGIC PLC Overview mDLV-11

 For the latest prices, please check AutomationDirect.com.

DirectLOGIC PLC Programming Cables

Since CPUs provide many different communication port possibilities, it is helpful to know exactly which
communications cable is required. Use the table below to choose the proper cable:

Family CPU (or other device) Port Cable

Port 1 D2-DSCBL (EA-MG-PGM-CBL optional)
All versions
Port 2 D2-DSCBL (EA-MG-PGM-CBL optional)
DirectLOGIC DL05 H0-ECOM / ECOM100 (modules) Only one **
Port 1 D2-DSCBL (EA-MG-PGM-CBL optional)
D0-DCM (module)
Port 2 D2-DSCBL-1
Port 1 D2-DSCBL (EA-MG-PGM-CBL optional)
All versions
Port 2 D2-DSCBL-1
DirectLOGIC DL06 H0-ECOM / ECOM100 (modules) Only one **
Port 1 D2-DSCBL (EA-MG-PGM-CBL optional)
D0-DCM (module)
Port 2 D2-DSCBL-1
DirectLOGIC DL105 F1-130 (all versions) Only one D2-DSCBL (EA-MG-PGM-CBL optional)
D2-230 Only one D2-DSCBL (EA-MG-PGM-CBL optional)
Top port D2-DSCBL (EA-MG-PGM-CBL optional)
D2-240
Bottom port D2-DSCBL (EA-MG-PGM-CBL optional)
Top port D2-DSCBL (EA-MG-PGM-CBL optional)
D2-250(-1)
Bottom port D2-DSCBL-1
DirectLOGIC DL205 Top port D2-DSCBL (EA-MG-PGM-CBL optional)
D2-260
Bottom port D2-DSCBL-1
Top port D2-DSCBL (EA-MG-PGM-CBL optional)
D2-262
Bottom port D2-DSCBL-1
D2-DCM (module) Only one D3-DSCBL-2
H2-ECOM (-F) / ECOM100 Only one **
D3-330/D3-330P Requires DCU* D3-DSCBL-2
Top port D3-DSCBL-1
D3-340
Bottom port D3-DSCBL-1
DirectLOGIC DL305
Top port D2-DSCBL (EA-MG-PGM-CBL optional)
D3-350
Bottom port D3-DSCBL-2
D3-DCM (module) Only one D3-DSCBL-2
Top port (15-pin) D4-DSCBL
D4-430/D4-440
Bottom port (25-pin) D3-DSCBL-2
Phone jack D2-DSCBL (EA-MG-PGM-CBL optional)
D4-450 Top port (15-pin) D4-DSCBL
Bottom port (25-pin) D3-DSCBL-2
DirectLOGIC DL405 Phone jack D2-DSCBL (EA-MG-PGM-CBL optional)
D4-454 Top port (15-pin) D4-DSCBL
Bottom port (25-pin) D3-DSCBL-2
D4-DCM (module) Only one D3-DSCBL-2
H4-ECOM (-F) / ECOM100 Only one **
Slice I/O (module) Only one D4-DSCBL
GE® Series 1 IC610CPU105/106 Requires DCU* D3-DSCBL-2
325-07, PPX:325-07 Requires DCU* D3-DSCBL-2
330-37, PPX:330-37 Requires DCU* D3-DSCBL-2
325S-07 (or 325 with stage kit) Requires DCU* D3-DSCBL-2
TI305™/SIMATIC® TI305™
330S-37, PPX:330S-37 Requires DCU* D3-DSCBL-2
Phone jack D3-DSCBL-1
335-37, PPX:335-37
If DCU is used* D3-DSCBL-2
425-CPU, PPX:425-CPU If DCU is used* D4-DSCBL
Top port (15-pin) D4-DSCBL
N/A, PPX:430-CPU
Bottom port (25-pin) D3-DSCBL-2
TI405™/SIMATIC TI405™
®

Top port (15-pin) D4-DSCBL

435-CPU, PPX:435-CPU
Bottom port (25-pin) D3-DSCBL-2
Smart slice Only one D4-DSCBL
* Requires RS232 Data Communications Unit (D3-232-DCU).
**Requires standard Ethernet twisted pair cable (HX-ECOM) or standard fiber optic cable (HX-ECOM-F).
***The GoldX USB-RS232 adapter is another option for USB communication.

mDLV-12 DirectLOGIC PLC Overview 1-800-633-0405

For the latest prices, please check AutomationDirect.com.

DirectLOGIC PLC Programming Cables

D2-DSCBL $23.50 D2-DSCBL-1 $50.00

D3-DSCBL-1 $53.00
D3-350 (bottom port)
or
DL405 CPU (bottom port)
D3-DSCBL-2 $48.50 or
DL205/405 DCM
or
DL305 w/DCU
RS-232

D4-DSCBL $51.00

Straight-through Patch Cable (Ethernet)

Crossover Cable (Ethernet)

www.automationdirect.com/directlogic-plcs DirectLOGIC PLC Overview mDLV-13