Printers: Settings and Problems: HP Laserjet 5L, 5P
Printers: Settings and Problems: HP Laserjet 5L, 5P
You should try to disable the bidirectional communication between printer and printer driver as
well as all other printer monitors. If that does not work, another interface or another WIBU-
BOX (BOX/SP or BOX/U) should be used.
HP printers
A list of all HP printers which have been tested by WIBU-SYSTEMS.
Canon printers
A list of all Canon printers which have been tested by WIBU-SYSTEMS.
Epson printers
A list of all Epson printers which have been tested by WIBU-SYSTEMS.
Lexmark printers
A list of all Lexmark printers which have been tested by WIBU-SYSTEMS.
Printer Operating System Note
Lexmark Optra N Novell Netware does not work!
Lexmark Optra SC1275 Win95 does not work!
Linotronic printers
A list of all Linotronic printers which have been tested by WIBU-SYSTEMS.
NEC printers
A list of all NEC printers which have been tested by WIBU-SYSTEMS.
Mannesmann printer
A list of all Mannesmann printers which have been tested by WIBU-SYSTEMS.
HP LaserJet 6P/6MP
PROBLEM: Installing the HP LaserJet Toolbox, printing does not work together with the
WIBU-BOX/P. WIBU-BOX/P is only found in the Shared mode (Setup "Shared Mode" in the
WIBU-KEY CPL). The LaserJet Toolbox is similiar to a status monitor which, actually, is
superflous. The LaserJet Toolbox communicates permanently with the printer in order to
display a window on the screen in case of status modifications. The interface is not even
released between two printing jobs.
SOLUTION Windows 95/98: The printer driver should be completely deinstalled and then
reinstalled as "adapted installation". The HP LaserJet Toolbox must not be selected. Nothing
else must be modified.The "improved printer driver", the "default printer driver" as well as the "
postscript printer driver" work properly with the WIBU-BOX/P in the bidirectional mode. You
can print and at the same time access the WIBU-BOX. The "Shared Mode" on the Setup page
of the WIBU-KEY CPL is not activated.
SOLUTION Windows NT 4.0: Printing and accessing the BOX at the same time does not
work under Windows NT.