4 - 5.1 - Fluid Action On Surfaces (Plane Surface)
4 - 5.1 - Fluid Action On Surfaces (Plane Surface)
4 - 5.1 - Fluid Action On Surfaces (Plane Surface)
HYDRO
STATICS
Fluid Mechanics
FLUID ACTION
ON SURFACES
Fluid Action on Surfaces
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
ME33 : Fluid Flow 4 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
ME33 : Fluid Flow 5 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
ME33 : Fluid Flow 6 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
ME33 : Fluid Flow 7 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Plane Surfaces Properties
ME33 : Fluid Flow 8 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Plane Surfaces Properties
ME33 : Fluid Flow 9 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Plane Surfaces Properties
ME33 : Fluid Flow 10 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Problem 1
A vertical rectangular plane of height d and base b is submerged in a
liquid with its top edge at the liquid surface. Determine the total force F
acting on one side and its location from the liquid surface.
ME33 : Fluid Flow 11 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Problem 2
A vertical triangular surface of height d and horizontal base width b is
submerged in a liquid with its vertex at the liquid surface. Determine the
total force F acting on one side and its location from the liquid surface.
ME33 : Fluid Flow 12 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Problem 3
A vertical circular gate of radius r is submerged in a liquid with its top
edge flushed on the liquid surface. Determine the magnitude and
location of the total force acting on one side of the gate.
ME33 : Fluid Flow 13 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Problem 4
A vertical rectangular gate 1.5 m wide and 3 m high is submerged in
water with its top edge 2 m below the water surface. Find the total
pressure acting on one side of the gate and its location from the bottom.
ME33 : Fluid Flow 14 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Problem 5
A vertical circular gate in a tunnel 8 m in diameter has oil (s = 0.8) on
one side and air on the other side. If soil is 12 m above the invert and
the air pressure is 40 kPa, where will a single support be located (above
the invert of the tunnel) to hold the gate in position?
ME33 : Fluid Flow 15 Chapter 11: Flow over bodies; lift and drag
Fluid Action on Surfaces
Problem Set 4
Air, p = 32 kPa
Problem 6
Determine the magnitude and 1m Oil, s = 0.80
location of the total hydrostatic
force acting on the 2 m x 4 m gate
1.5 m Water
shown in the figure.
3m Glycerin, s = 1.26
ME33 : Fluid Flow 16 Chapter 11: Flow over bodies; lift and drag