Scribd
Upload
393 views10 pages

Lab Report: Submitted To

The document is a lab report that describes designing and implementing 3-bit and 4-bit even/odd parity bit generators. It includes truth tables and screenshots from logic simulation software showing the circuit designs for 3-bit and 4-bit even and odd parity generators. The objective was to design and test these circuits. Components used included ICs, a breadboard, and simulation tools. The circuits were tested against their truth tables and found to be functioning correctly.

Uploaded by

Md. Al Amin 201-15-3479
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
393 views10 pages

Lab Report: Submitted To

The document is a lab report that describes designing and implementing 3-bit and 4-bit even/odd parity bit generators. It includes truth tables and screenshots from logic simulation software showing the circuit designs for 3-bit and 4-bit even and odd parity generators. The objective was to design and test these circuits. Components used included ICs, a breadboard, and simulation tools. The circuits were tested against their truth tables and found to be functioning correctly.

Uploaded by

Md. Al Amin 201-15-3479
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

LAB REPORT

CSE 224

Course Name: Digital Electronics Lab

Assignment No: 03

Assignment Name: Design and implementation of 3 bit and 4 bit


even/odd parity bit generator.

Submitted To:
Name: Mohammad Monirul Islam
Lecturer, Department of CSE
Daffodil International University.

Submitted By:
Name: Md. Al Amin
ID: 201-15-3479
Section: PC-H
ASSIGNMENT NO: 03

NAME OF THE ASSIGNMENT: Design and


implementation of 3 bit and 4 bit even/odd parity bit
generator.

Objective: Design and implementation of 3 bit and 4 bit even/odd


parity bit generator.

Apparatus: Breadboard,XOR gate ic (7486),Not gate


ic(7404), power supply,Resistor,Led bulb,Logisim,
tinkercad.

Truthtable:

3 bit even parity bit generator


Screenshot from logicsim:

3 bit even parity bit generator

Screenshot from tinkercad:

3 bit even parity bit generator


Truthtable:
3 bit odd parity bit generator

Screenshot from logicsim:

3 bit odd parity bit generator


Screenshot from tinkercad:

3 bit odd parity bit generator

Truthtable:
4 bit even parity bit generator
Screenshot from logicsim:

4 bit even parity bit generator

Screenshot from tinkercad:

4 bit even parity bit generator


Truthtable:
4 bit odd parity bit generator
Screenshot from logicsim:

4 bit odd parity bit generator

Screenshot from tinkercad:

4 bit odd parity bit generator


Procedure:
*Check all the componants are working in breadboard.
*Insart the appropriate IC into the IC base.
*Make connection as shown in the circuit diagram.
*Verify the Truth Table and observe the outputs.

Conclusion:
In this lab, I explored the 3 bit and 4 bit even/odd parity bit
generator. I learned how to implement them on a breadboard with
integrated circuits. I have confirmed that the results are consistent
with the truth table of the Logic Gate test.

You might also like