TFS Brochure

SUPPLIER OF
FIXINGS, FASTENERS,
SEALANTS, RESINS, ANCHORS,
DIAMOND PRODUCTS,
ABRASIVES, HAND TOOLS,
POWER TOOLS & ACCESSORIES
BUILDERS METAL WORK,

WALL TIES & PPE.
Tel: +44 (0)1732 885675
Fax: +44 (0)1732 884543
CONTENTS
TIMBER CONSTRUCTION SCREWS 07 - 24
DRYLINING CONSTRUCTION SCREWS 25 - 28
METAL CONSTRUCTION SCREWS 29 - 38
WINDOW FABRICATION SCREWS 39 - 44
NUTS, BOLTS, SETS AND WASHERS 45 - 52
FIXINGS AND FASTENERS 53 - 58
PLASTERBOARD FIXINGS 59 - 61
CONCRETE AND MASONRY FIXINGS 62 - 75
COLLATED AND LOOSE NAILS 76 - 88
BUILDERS METAL WORK 89 - 102
DRILLING 103 - 126
CUTTING 127 - 148
DRIVER BITS 149 - 154
HAND TOOLS 155 - 158
ADHESIVE TAPES AND PROTECTIVE FILMS 159 - 163
DOOR ACCESSORIES 164 - 167
LOCKS AND SECURITY SOLUTIONS 168 - 172
1
1
CONTENTS
RECESS STYLES
POZI / CROSS RECESS TIM DRIVE RECESS

Standard recess for woodscrews, High performance recess on
chipboard screws etc. TIMco Multi-Fix and Velocity screws.
PHILLIPS RECESS SQUARE RECESS /

ROBERTSON DRIVE
Standard recess for
self-drilling, drywall and Recess on square drive pan
window screws. self-drilling screws.
COMBI RECESS
A combination of a traditional
slotted recess with a more
common pozi recess.
HEAD TYPES
COUNTERSUNK HEAD BUGLE HEAD

Designed for countersinking A curved surface under the head
into timber for a flush or to prevent damage or tearing
recessed finish. May have ribs to the plasterboard paper.
to assist countersinking.
DOUBLE COUNTERSUNK PAN / ROUND HEAD

Improved design on the Head with a flat underside.
countersunk head to give Designed for application fixing
additional head strength and against metal surfaces.
assist countersinking.
DOUBLE COUNTERSUNK WAFER / FLANGE HEAD

WITH RIBS
Low profile head with a flat
Ribs under head to assist underside for applications where
with countersinking. a large clamping area and an
unobtrusive head is required.
SHALLOW PAN HEXAGON HEAD

COUNTERSUNK
Positive drive Hex Head with
A special head design to assist with an integral washer to increase
clamping and countersinking. clamping effectiveness.
2
CONTENTS
THREAD TYPES
COARSE THREAD (up to 16 TPI) TWIN THREAD

Also know as spaced threads, Also known as twin lead threads,
they are normally used for they are designed to give a fast
all timber applications. insertion time in soft material.
FINE THREAD (over 16 TPI) HI-LO THREAD

Also known as metric threads, they Used in soft timbers, plastics and
are only used in steel applications. into thin sheet sections. Hi-Lo
Fine threads are for use with thicker threads have superior holding
steels. (5 - 12mm thickness). power compared to a low TPI coarse
thread in these types of material.
SELF TAPPING THREAD

A common thread design mainly
used in steel applications. (1-5mm)
POINT STYLES
NEEDLE / GIMLET AND SELF DRILL POINT

SUPER SHARP POINT (SS)
For drilling into metals without
Designed for piercing timber, MDF, the need for pre-drilling.
plastic and light gauge metal up
to 0.6mm without pre-drilling.
AB POINT C2 SLASH
For use in pre-drilled sheet Twin cut for rapid "pick up"
material applications. and reduced splitting.
B POINT TYPE 17 POINT

For use in pre-drilled shallow holes. Also known as slash point, they are
used for fixing timber without the
need to pre-drill. The cutting edge
helps reduces splitting of the timber.
3
CONTENTS
GAUGE MEASURING LENGTH

The gauge of the screw is determined by the size of the Fasteners with the following head types are measured from
outside thread diameter. the underside of the head to the point of the screw:
Metric PAN / ROUND WAFER / FLANGE HEXAGON

Gauge
(mm)
0g 1.5
1g 1.9
2g 2.25
3g 2.5
4g 3.0
5g 3.3
6g 3.5
7g 3.9 Fasteners with the following head types are measured from
8g 4.2 the top of the countersunk to the point of the screw:
9g 4.5
10g 4.8
12g 5.5
13g 6.1
14g 6.3
15g 6.5
16g 6.8
18g 7.5 COUNTERSUNK DOUBLE CS DCS WITH RIBS
20g 8.1
24g 9.4
THREAD LENGTH
BUGLE RAISED HEAD
TPI - THREADS PER INCH

The TPI is the number of thread crests that can be counted
within 1” (25.4mm)
TPI
Drill Tip
44
CONTENTS
METRIC/IMPERIAL SIZE COMPARISON CHART

Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ approximate metric equivalents
in brackets.
Imperial Metric Imperial Metric
(inch) (mm) (inch) (mm)
1/64” 0.40 13/16” 20.64

1/32” 0.79 53/64” 21.03
3/64” 1.19 27/32” 21.43
1/16” 1.59 55/64” 21.83
5/64” 1.98 7/8” 22.23 (22.0)
3/32” 2.38 57/64” 22.62
7/64” 2.78 29/32” 23.02
1/8” 3.17 (3.0) 59/64” 23.42
9/64” 3.5 15/16” 23.81
5/32” 3.97 (4.0) 61/64” 24.21
11/64” 4.5 31/32” 24.61
3/16” 4.76 (5.0) 63/64” 25.00
13/64” 5.16 1” 25.40 (25.0)
7/32” 5.5 1-1/16” 26.99
15/64” 5.95 1-3/32” 27.78
1/4” 6.35 (6.0) 1-1/8” 28.58 (28.0)
17/64” 6.75 1-5/32” 29.37
9/32” 7.14 1-3/16” 30.16 (30.0)
19/64” 7.54 1-7/32” 30.96
5/16” 7.94 (8.0) 1-1/4” 31.75 (32.0)
21/64” 8.33 1-1/2” 38.10 (38.0)
11/32” 8.73 1-3/4” 45.45 (45.0)
23/64” 9.13 2” 50.80 (50.0)
3/8” 9.52 (10.0) 2-1/4” 57.15 (57.0)
25/64” 9.92 2-1/2” 63.50 (65.0)
13/32” 10.32 2-3/4” 69.85 (70.0)
27/64” 10.72 3” 76.20 (75.0)
7/16” 11.11 3-1/4” 82.55 (82.0)
29/64” 11.51 3-1/2” 88.90 (90.0)
15/32” 11.91 3-3/4” 95.25 (95.0)
31/64” 12.30 4” 101.60 (100)
1/2” 12.70 (13.0) 4-1/2” 114.30 (115)
17/32” 13.49 5” 127.00 (125)
35/64” 13.89 5-1/2” 139.70 (140)
9/16” 14.29 (14.0) 6” 152.40(150)
37/64” 14.68 6-1/2” 165.10 (165)
19/32” 15.08 7” 177.80 (175)
39/64” 15.48 7-1/2” 190.50 (190)
5/8” 15.88 (16.0) 8” 203.20 (200)
41/64” 16.27 8-1/2” 215.90 (215)
21/32” 16.67 9” 228.60 (230)
43/64” 17.06 9-1/2” 241.30 (240)
11/16” 17.46 10” 254.00 (250/255)
45/64” 17.86 11” 279.40 (280)
23/32” 18.26 12” 304.80 (305)
47/64” 18.65 13” 330.20 (330)
3/4” 19.05 (19.0) 14” 335.60 (350/355)
49/64” 19.45 15” 381.00 (380)
25/32” 19.84 16” 406.40 (400/405)
51/64” 20.24 18” 457.20 (455/460)
5
CONTENTS
PLATING & FINISH GUIDE

Yellow (CR6) - Zinc electrolytic plating Nickel - An electroplated, high lustre, Bright - Polished only.
and yellow passivated after treatment for corrosion resistant finish.
enhanced corrosion. Sherardised - A dry galvanised, zinc
Exterior - A superior organic finish bonded plating.
Zinc (CR3) - A bright Zinc electrolytic which is environmentally friendly and
plating with a clear toxin free finish. offers an excellent resistance to corrosion Galv. - A post-manufacturing electro-
Complies with restrictions of hazardous in outdoor applications. galvanic plating applied to the product.
substances in electrical/electronic
equipment (ROHS) directive (2002/95/EC). A2/Aust. SS - A non-magnetic Pre-Galv. - A pre-manufacturing
austenitic steel suitable for many day to electro-galvanic plating applied to the
Zinc (CR6) - A bright zinc electrolytic day external or corrosive applications product.
plating. offering an excellent resistance to
corrosion. FirmaGalv - A electro-galvanic
Black Pass. - A zinc electrolytic plating.
plating with a black passivation after A4 SS - Very similar to the A2
treatment to enhance corrosion resistance. SS but more suitable for extremely FirmaGalv+ - Similar to the electro-
corrosive applications, including marine galvanic plating on FirmaGalv. This plating
Black Phos. - An immersed black environments. provides better corrosion resistance.
phosphate plating for corrosion resistance
and lubrication. Martensitic SS - A magnetic, Hot Dipped - A galvanised zinc
martensitic stainless steel with moderate plating which gives excellent corrosion
heat resistance, with silver ruspert plating. resistance.
APPLICATION GUIDE
HARDWOOD SOFTWOOD CHIPBOARD MDF WOOD PANEL PLASTIC PLASTERBOARD BRICK CONCRETE
STONE HOLLOW BLOCK REINFORCED HARD CONCRETE KERBS/SLABS CONCRETE VITRIFIED

BLOCK CONCRETE CONCRETE (15-30) PAVIORS CLAY
PRODUCTS
SOFT CLAY ENGINEERING MEDIUM SOFT FACING CLAY PAVIORS HARD SANDSTONE CONCRETE HARD SLATE
BRICK FACING BRICK SANDSTONE ROOFING
BRICKS TILES
CLAY ROOF CERAMIC TILE GLASS MARBLE PORCELAIN DAMP/WET UNDERWATER LOW HEAVY DUTY
TILES HOLES VENTILATION FIXING
REBAR STEEL ALUMINIUM NON- STAINLESS CAST IRON THIN SHEET

FERROUS STEEL METAL
METAL
6
TIMBER
CONSTRUCTION
SCREWS
08 - VELOCITY 15 - SOLO 20 - MIXED TRAYS
09 - C2 CLASSIC 17 - TWIN-THREADED 20 - MIXED PACKS
10 - C2 FLOORING 18 - BLACKJAX 21 - DECKING SCREWS
11 - C2 EXTERIOR 19 - MIRROR SCREWS 22 - TIMBER SCREWS
11 - C2 TONGUE-FIX 19 - CARCASS SCREWS 24 - COACH SCREWS
12 - CLASSIC 19 - SCREW CAPS 24 - NYLON PLUGS
TIMBER CONSTRUCTION SCREWS VELOCITY MULTI-PURPOSE SCREWS
VELOCITY® Materials
Premium multi-use screw

Available in: Yellow
The unique patented Velocity screw has been specifically designed to give rapid installation
into many different materials whilst achieving exceptional pull out resistance. Designed to
give the user a consistent and reliable product that can be used in a variety of applications.
VELOCITY - Yellow
Double Countersunk
Product Size Size Product Size Size
Qty Qty
Code (Metric) (Imp. equiv.) Code (Metric) (Imp. equiv.)
Boxes Boxes
30016VY 3.0 x 16 4 x 5⁄8 200 45060VY 4.5 x 60 9 x 2½ 200
30020VY 3.0 x 20 4x¾ 200 45070VY 4.5 x 70 9 x 2¾ 200
30030VY 3.0 x 30 4 x 1¼ 200 45080VY 4.5 x 80 9x3 200
30040VY 3.0 x 40 4 x 1½ 200 50030VY 5.0 x 30 10 x 1¼ 200
35012VY 3.5 x 12 6x½ 200 50040VY 5.0 x 40 10 x 1½ 200
35016VY 3.5 x 16 6 x 5⁄8 200 50045VY 5.0 x 45 10 x 1¾ 200
35020VY 3.5 x 20 6x¾ 200 50050VY 5.0 x 50 10 x 2 200
35025VY 3.5 x 25 6x1 200 50060VY 5.0 x 60 10 x 2½ 200
35030VY 3.5 x 30 6 x 1¼ 200 50070VY 5.0 x 70 10 x 2¾ 200
35035VY 3.5 x 35 6 x 13⁄8 200 50075VY 5.0 x 75 10 x 27⁄8 200
35040VY 3.5 x 40 6 x 1½ 200 50080VY 5.0 x 80 10 x 3 200
35045VY 3.5 x 45 6 x 1¾ 200 50090VY 5.0 x 90 10 x 3½ 100
35050VY 3.5 x 50 6x2 200 50100VY 5.0 x 100 10 x 4 100
40016VY 4.0 x 16 8x½ 200 60040VY 6.0 x 40 12 x 1½ 200
40020VY 4.0 x 20 8 x 5⁄8 200 60045VY 6.0 x 45 12 x 1¾ 200
40025VY 4.0 x 25 8x1 200 60050VY 6.0 x 50 12 x 2 200
40030VY 4.0 x 30 8 x 1¼ 200 60060VY 6.0 x 60 12 x 2½ 200
40035VY 4.0 x 35 8 x 13⁄8 200 60070VY 6.0 x 70 12 x 2¾ 200
40040VY 4.0 x 40 8 x 1½ 200 60080VY 6.0 x 80 12 x 3 200
40045VY 4.0 x 45 8 x 1¾ 200 60090VY 6.0 x 90 12 x 3½ 100
40060VY 4.0 x 60 8 x 2½ 200 60100VY 6.0 x 100 12 x 4 100
40070VY 4.0 x 70 8 x 2¾ 200 60120VY 6.0 x 120 12 x 4¾ 100
40080VY 4.0 x 80 8x3 200 60130VY 6.0 x 130 12 x 5 100
45030VY 4.5 x 30 9 x 1¼ 200 60150VY 6.0 x 150 12 x 6 100
45040VY 4.5 x 40 9 x 1½ 200 60180VY 6.0 x 180 12 x 7¼ 100
45050VY 4.5 x 50 9x2 200 60200VY 6.0 x 200 12 x 8 100
VELOCITY - TIM DRIVE - Yellow

Double Countersunk

Qty Qty
Boxes (Driver bit included) Boxes (Driver bit included)

50050VYTX 5.0 x 50 10 x 2 200 60150VYTX 6.0 x 150 12 x 6 100
50060VYTX 5.0 x 60 10 x 2½ 200 60180VYTX 6.0 x 180 12 x 7¼ 100
50070VYTX 5.0 x 70 10 x 2¾ 200 60200VYTX 6.0 x 200 12 x 8 100
50080VYTX 5.0 x 80 10 x 3 200 80200VYTX 8.0 x 200 16 x 8 50
50100VYTX 5.0 x 100 10 x 4 100 80225VYTX 8.0 x 225 16 x 9 50
60080VYTX 6.0 x 80 12 x 3 200 80250VYTX 8.0 x 250 16 x 10 50
60100VYTX 6.0 x 100 12 x 4 100 80275VYTX 8.0 x 275 16 x 107⁄8 25
60120VYTX 6.0 x 120 12 x 4¾ 100 80300VYTX 8.0 x 300 16 x 12 25
8
C2 CLASSIC MULTI-PURPOSE SCREWS TIMBER CONSTRUCTION SCREWS
C2® CLASSIC Materials
Multi-purpose screw
Available in: Yellow Zinc (CR3)
The C2 Classic has been re-engineered around the backbone of the Classic, one of Europe’s largest selling
multi-purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a
revolutionary high performance multi-purpose screw.
C2 CLASSIC - Yellow
Double Countersunk with Ribs
Qty Qty
50100C2 5.0 x 100 10 x 4 100
Tubs (V5 bit included) 50120C2 5.0 x 120 10 x 4¾ 100
35025C2TUB 3.5 x 25 6x1 2,000 60050C2 6.0 x 50 12 x 2 200
35030C2TUB 3.5 x 30 6 x 1¼ 1,800 60060C2 6.0 x 60 12 x 2½ 200
40025C2TUB 4.0 x 25 8x1 1,700 60070C2 6.0 x 70 12 x 2¾ 200
40030C2TUB 4.0 x 30 8 x 1¼ 1,500 60080C2 6.0 x 80 12 x 3 200
40040C2TUB 4.0 x 40 8 x 1½ 1,200 60090C2 6.0 x 90 12 x 3½ 100
40050C2TUB 4.0 x 50 8x2 800 60100C2 6.0 x 100 12 x 4 100
40060C2TUB 4.0 x 60 8 x 2½ 600 60120C2 6.0 x 120 12 x 4¾ 100
40080C2TUB 4.0 x 80 8x3 400 60130C2 6.0 x 130 12 x 51⁄8 100
50040C2TUB 5.0 x 40 10 x 1½ 800 60150C2 6.0 x 150 12 x 6 100
50050C2TUB 5.0 x 50 10 x 2 600
60180C2 6.0 x 180 12 x 7¼ 100
50060C2TUB 5.0 x 60 10 x 2½ 400
60200C2 6.0 x 200 12 x 8 100
50070C2TUB 5.0 x 70 10 x 2¾ 375
50080C2TUB 5.0 x 80 10 x 3 350
500100C2TUB 5.0 x 100 10 x 4 300
Boxes C2 CLASSIC - Zinc (CR3)
35012C2 3.5 x 12 4x½ 200
35016C2 3.5 x 16 4 x 5⁄8 200 Double Countersunk with Ribs
35020C2 3.5 x 20 6x¾ 200
35025C2 3.5 x 25 6x1 200
35030C2 3.5 x 30 6 x 1¼ 200
35040C2 3.5 x 40 6 x 1½ 200
35050C2 3.5 x 50 6x2 200
40025C2 4.0 x 25 8x1 200
40030C2 4.0 x 30 8 x 1¼ 200
40035C2 4.0 x 35 8 x 13⁄8 200
40040C2 4.0 x 40 8 x 1½ 200
40045C2 4.0 x 45 8 x 1¾ 200
40050C2 4.0 x 50 8x2 200
40060C2 4.0 x 60 8 x 2½ 200
40070C2 4.0 x 70 8 x 2¾ 200
40080C2 4.0 x 80 8x3 200
45030C2 4.5 x 30 9 x 1¼ 200 Product Size Size
Qty
45040C2 4.5 x 40 9 x 1½ 200 Code (Metric) (Imp. equiv.)
45050C2 4.5 x 50 9x2 200
45060C2 4.5 x 60 9 x 2½ 200 Tubs (V5 bit included)
45070C2 4.5 x 70 9 x 2¾ 200 40030C2ZTUB 4.0 x 30 8 x 1¼ 1,500
45080C2 4.5 x 80 9x3 200 40040C2ZTUB 4.0 x 40 8 x 1½ 1,200
50030C2 5.0 x 30 10 x 1¼ 200
40050C2ZTUB 4.0 x 50 8x2 800
50040C2 5.0 x 40 10 x 1½ 200
50045C2 5.0 x 45 10 x 1¾ 200 40060C2ZTUB 4.0 x 60 8 x 2½ 600
50050C2 5.0 x 50 10 x 2 200 40080C2ZTUB 4.0 x 80 8x3 400
50060C2 5.0 x 60 10 x 2½ 200 50050C2ZTUB 5.0 x 50 10 x 2 600
50070C2 5.0 x 70 10 x 2¾ 200 50060C2ZTUB 5.0 x 60 10 x 2½ 400
50075C2 5.0 x 75 10 x 27⁄8 200 50070C2ZTUB 5.0 x 70 10 x 2¾ 375
50080C2 5.0 x 80 10 x 3 200 50080C2ZTUB 5.0 x 80 10 x 3 350
50090C2 5.0 x 90 10 x 3½ 100
500100C2ZTUB 5.0 x 100 10 x 4 300
9
9
TIMBER CONSTRUCTION SCREWS C2 TRADE CASE & C2 FLOORING SCREW
C2 CLASSIC® TRADE CASE Materials
Multi-purpose screw
A strong metal case containing nine of the most popular C2 Screws and
five V5 impact driver bits.
Product Size Size

Qty
Code (Metric) (Imp. equiv.)
Trade Case - Qty 1,800

3.5 x 16 6 x 5⁄8 480
3.5 x 25 6x1 350
4.0 x 30 8 x 1¼ 250
4.0 x 40 8 x 1½ 350
4.0 x 50 8x2 100
C2SC
5.0 x 60 10 x 2½ 65
5.0 x 70 10 x 2¾ 55
5.0 x 80 10 x 3 100
5.0 x 100 10 x 4 45
V5 Impact Driver Bits 5
C2® FLOORING & MDF Materials
Twin cut flooring screw

To BS
EN ISO
14592:2
008
Designed for use in man made boards such as MDF and chipboard. The C2 twin-cuts ensure a rapid pickup and
reduces the likelihood of splitting whilst the steep head design with self countersinking ribs ensures a flush finish.
The plain shank enables the screw to pull the two substrates together with out the need to manually clamp.
C2 FLOORING & MDF SCREW

Product Size Size
Qty
Tubs (T20 driver bit included)

42055C2MDF 4.2 x 55 8 x 2¼ 250
10
C2 EXTERIOR & C2 TONGUE FIX TIMBER CONSTRUCTION SCREWS
C2® EXTERIOR Materials
Twin cut exterior screw

Available in: Exterior
To BS
EN ISO
14592:2
008
The C2 Exterior screw has been plated with a multi-layer protection system that consists of an organic top coat
barrier and a zinc base layer. Designed to provide excellent additional protection against corrosion in exterior
applications.
C2 EXTERIOR SCREW
Product Size Size
Qty
Tubs (V5 impact bit included)

40030C2S 4.0 X 30 8 x 1¼ 400
40040C2S 4.0 X 40 8 x 1½ 350
40050C2S 4.0 X 50 8x2 300
40060C2S 4.0 X 60 8 x 2½ 200
40070C2S 4.0 X 70 8 x 2¾ 170
50050C2S 5.0 X 50 10 x 2 180
50060C2S 5.0 X 60 10 x 2½ 150
50070C2S 5.0 X 70 10 x 2¾ 120
50080C2S 5.0 X 80 10 x 3 110
50100C2S 5.0 X 100 10 x 4 80
C2® TONGUE-FIX Materials
Twin cut flooring screw

To BS
EN ISO
14592:2
008
Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 Tongue-Fix gives a
secure hidden fixture through the tongue without causing damage, allowing a flush fit with the next board.
C2 TONGUE-FIX SCREW
Reduced Head Countersunk
Product Size Size
Qty
Tubs (T10 driver bit included)

35045C2TG 3.5 x 45 6 x 1¾ 350
11
TIMBER CONSTRUCTION SCREWS CLASSIC MULTI-PURPOSE SCREWS
CLASSIC Materials
Single cut multi-purpose screw

Available in: Yellow Zinc (CR3) Nickel Black Pass.
A2/Aust. SS
Specifically designed as a multi-purpose product, the 25° sharp point, the new type 17 slash, special thread design,
lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood,
chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
CLASSIC - Yellow
Double Countersunk
Product Size Size

Qty
40070CLAF 4.0 x 70 8 x 2¾ 200

40080CLAF 4.0 x 80 8x3 200
45016CLAF 4.5 x 16 9 x 5⁄8 200
45020CLAF 4.5 x 20 9x¾ 200
45025CLAF 4.5 x 25 9x1 200
45030CLAF 4.5 x 30 9 x 1¼ 200
45035CLAF 4.5 x 35 9 x 13⁄8 200
45040CLAF 4.5 x 40 9 x 1½ 200
45045CLAF 4.5 x 45 9 x 1¾ 200
45050CLAF 4.5 x 50 9x2 200
45055CLAF 4.5 x 55 9 x 23⁄8 200
Product Size Size 45060CLAF 4.5 x 60 9 x 2½ 200
Qty
Code (Metric) (Imp. equiv.) 45070CLAF 4.5 x 70 9 x 2¾ 200
45080CLAF 4.5 x 80 9x3 200
Boxes 50020CLAF 5.0 x 20 10 x ¾ 200
30012CLAF 3.0 x 12 4x½ 200 50025CLAF 5.0 x 25 10 x 1 200
30016CLAF 3.0 x 16 4 x 5⁄8 200 50030CLAF 5.0 x 30 10 x 1¼ 200
30020CLAF 3.0 x 20 4x¾ 200 50035CLAF 5.0 x 35 10 x 13⁄8 200
30025CLAF 3.0 x 25 4x1 200 50040CLAF 5.0 x 40 10 x 1½ 200
30030CLAF 3.0 x 30 4 x 1¼ 200 50045CLAF 5.0 x 45 10 x 1¾ 200
30035CLAF 3.0 x 35 4 x 13⁄8 200 50050CLAF 5.0 x 50 10 x 2 200
30040CLAF 3.0 x 40 4 x 1½ 200 50055CLAF 5.0 x 55 10 x 23⁄8 200
35012CLAF 3.5 x 12 6x½ 200 50060CLAF 5.0 x 60 10 x 2½ 200
35016CLAF 3.5 x 16 6 x 5⁄8 200 50070CLAF 5.0 x 70 10 x 2¾ 200
35020CLAF 3.5 x 20 6x¾ 200 50075CLAF 5.0 x 75 10 x 27⁄8 200
35025CLAF 3.5 x 25 6x1 200 50080CLAF 5.0 x 80 10 x 3 200
35030CLAF 3.5 x 30 6 x 1¼ 200 50090CLAF 5.0 x 90 10 x 3½ 100
35035CLAF 3.5 x 35 6 x 13⁄8 200 50100CLAF 5.0 x 100 10 x 4 100
35040CLAF 3.5 x 40 6 x 1½ 200 50120CLAF 5.0 x 120 10 x 4¾ 100
35045CLAF 3.5 x 45 6 x 1¾ 200 60040CLAF 6.0 x 40 12 x 1½ 200
35050CLAF 3.5 x 50 6x2 200 60045CLAF 6.0 x 45 12 x 1¾ 200
40012CLAF 4.0 x 12 8x½ 200 60050CLAF 6.0 x 50 12 x 2 200
40016CLAF 4.0 x 16 8 x 5⁄8 200 60060CLAF 6.0 x 60 12 x 2½ 200
40020CLAF 4.0 x 20 8x¾ 200 60070CLAF 6.0 x 70 12 x 2¾ 200
40025CLAF 4.0 x 25 8x1 200 60080CLAF 6.0 x 80 12 x 3 200
40030CLAF 4.0 x 30 8x1¼ 200 60090CLAF 6.0 x 90 12 x 3½ 100
40035CLAF 4.0 x 35 8 x 13⁄8 200 60100CLAF 6.0 x 100 12 x 4 100
40040CLAF 4.0 x 40 8 x 1½ 200 60120CLAF 6.0 x 120 12 x 4¾ 100
40045CLAF 4.0 x 45 8 x 1¾ 200 60130CLAF 6.0 x 130 12 x 51⁄8 100
40050CLAF 4.0 x 50 8x2 200 60150CLAF 6.0 x 150 12 x 6 100
40055CLAF 4.0 x 55 8 x 23⁄8 200 60180CLAF 6.0 x 180 12 x 7¼ 100
40060CLAF 4.0 x 60 8 x 2½ 200 60200CLAF 6.0 x 200 12 x 8 100
12
CLASSIC MULTI-PURPOSE SCREWS TIMBER CONSTRUCTION SCREWS
CLASSIC PAN HEAD - Yellow CLASSIC - Zinc (CR3)

Pan Head Double Countersunk
The Classic multi-purpose screw with pan head for

The Classic multi-purpose screw plated in zinc.
extra clamping.

Qty Qty
Boxes Boxes
35012CLAP 3.5 x 12 6x½ 200 30012CLAZ 3.0 x 12 4x½ 200
35016CLAP 3.5 x 16 6 x 5⁄8 200 30016CLAZ 3.0 x 16 4 x 5⁄8 200
35020CLAP 3.5 x 20 6x¾ 200 30020CLAZ 3.0 x 20 4x¾ 200
35025CLAP 3.5 x 25 6x1 200 30025CLAZ 3.0 x 25 4x1 200
40016CLAP 4.0 x 16 8 x 5⁄8 200 35012CLAZ 3.5 x 12 6x½ 200
40020CLAP 4.0 x 20 8x¾ 200 35016CLAZ 3.5 x 16 6 x 5⁄8 200
40025CLAP 4.0 x 25 8x1 200 35020CLAZ 3.5 x 20 6x¾ 200
40030CLAP 4.0 x 30 8 x 1¼ 200 35025CLAZ 3.5 x 25 6x1 200
40035CLAP 4.0 x 35 8 x 13⁄8 200 35030CLAZ 3.5 x 30 6 x 1¼ 200
40040CLAP 4.0 x 40 8 x 1½ 200 35035CLAZ 3.5 x 35 6 x 13⁄8 200
40050CLAP 4.0 x 50 8x2 200 35040CLAZ 3.5 x 40 6 x 1½ 200
50030CLAP 5.0 x 30 10 x 1¼ 200 35050CLAZ 3.5 x 50 6x2 200
50050CLAP 5.0 x 50 10 x 2 200 40016CLAZ 4.0 x 16 8 x 5⁄8 200
40020CLAZ 4.0 x 20 8x¾ 200
40025CLAZ 4.0 X 25 8X1 200
40030CLAZ 4.0 x 30 8 x 1¼ 200
CLASSIC HINGE SCREW - Yellow Nickel
40035CLAZ 4.0 x 35 8 x 13⁄8 200
Classic multi-purpose screw with a reduced 5mm 40040CLAZ 4.0 x 40 8 x 1½ 200
head for specific use in continuous/piano hinges. 40045CLAZ 4.0 x 45 8 x 1¾ 200
40050CLAZ 4.0 x 50 8x2 200
40055CLAZ 4.0 x 55 8 x 23⁄8 200
CLASSIC HINGE SCREW - Yellow 40060CLAZ 4.0 x 60 8 x 2½ 200
40070CLAZ 4.0 x 70 8 x 2¾ 200
5mm Reduced Head
45030CLAZ 4.5 x 30 9 x 1¼ 200
45040CLAZ 4.5 x 40 9 x 1½ 200
45050CLAZ 4.5 x 50 9x2 200
45070CLAZ 4.5 x 70 9 x 2¾ 200
Product Size Size 50025CLAZ 5.0 x 25 10 x 1 200
Qty 50030CLAZ 5.0 x 30 10 x 1¼ 200
50035CLAZ 5.0 x 35 10 x 13⁄8 200
Boxes 50040CLAZ 5.0 x 40 10 x 1 ½ 200
30012CLAH 3.0 x 12 4x½ 200 50050CLAZ 5.0 x 50 10 x 2 200
30016CLAH 3.0 x 16 4 x 5⁄8 200 50060CLAZ 5.0 x 60 10 x 2½ 200
30020CLAH 3.0 x 20 4x¾ 200 50070CLAZ 5.0 x 70 10 x 2¾ 200
30025CLAH 3.0 x 25 4x1 200 50080CLAZ 5.0 x 80 10 x 3 200
50090CLAZ 5.0 x 90 10 x 3½ 100
50100CLAZ 5.0 x 100 10 x 4 100
CLASSIC HINGE SCREW - Nickel 60040CLAZ 6.0 x 40 12 x 1½ 200
5mm Reduced Head 60050CLAZ 6.0 x 50 12 x 2 200
60070CLAZ 6.0 x 70 12 x 2¾ 200
60080CLAZ 6.0 x 80 12 x 3 200
60100CLAZ 6.0 x 100 12 x 4 100
Product Size Size

Qty
Boxes
30012CLAHN 3.0 x 12 4x½ 200
30016CLAHN 3.0 x 16 4 x 5⁄8 200
30020CLAHN 3.0 x 20 4x¾ 200
13
TIMBER CONSTRUCTION SCREWS CLASSIC MULTI-PURPOSE SCREWS
CLASSIC - A2/Aust. SS Product Size Size

Qty
Double Countersunk Code (Metric) (Imp. equiv.)
Packs
35030CHSSP 3.5 x 30 6 x 1¼ 30
40025CHSSP 4.0 x 25 8x1 25
40030CHSSP 4.0 x 30 8 x 1¼ 20
The Classic multi-purpose screw in stainless steel for 40040CHSSP 4.0 x 40 8 x 1½ 15
added corrosion resistance. 40050CHSSP 4.0 x 50 8x2 14
50050CHSSP 5.0 x 50 10 x 2 10
Product Size Size
Qty 50060CHSSP 5.0 x 60 10 x 2½ 8
50070CHSSP 5.0 x 70 10 x 2¾ 7
Boxes 50080CHSSP 5.0 x 80 10 x 3 6
30012CLASS 3.0 x 12 4x½ 200 50100CHSSP 5.0 x 100 10 x 4 4
30016CLASS 3.0 x 16 4 x 5⁄8 200
30020CLASS 3.0 x 20 4x¾ 200
30025CLASS 3.0 x 25 4x1 200
35012CLASS 3.5 x 12 6x½ 200
CLASSIC - Black Pass.
35016CLASS 3.5 x 16 6 x 5⁄8 200 Double Countersunk

35020CLASS 3.5 x 20 6x¾ 200
35025CLASS 3.5 x 25 6x1 200
35030CLASS 3.5 x 30 6x1¼ 200
35035CLASS 3.5 x 35 6 x 1 3⁄8 200
35040CLASS 3.5 x 40 6x1½ 200
The Classic multi-purpose screw in black passivated.
35050CLASS 3.5 x 50 6x2 200
40016CLASS 4.0 x 16 8 x 5⁄8 200
40020CLASS 4.0 x 20 8x¾ 200 Product Size Size
Qty
40025CLASS 4.0 x 25 8x1 200
40030CLASS 4.0 x 30 8x1¼ 200 Boxes
40035CLASS 4.0 x 35 8 x 1 3⁄8 200
35016CLAB 3.5 x 16 6 x 5⁄8 200
40040CLASS 4.0 x 40 8x1½ 200
35025CLAB 3.5 x 25 6x1 200
40045CLASS 4.0 x 45 8x1¾ 200
40025CLAB 4.0 x 25 8x1 200
40050CLASS 4.0 x 50 8x2 200
40030CLAB 4.0 x 30 8 x 1¼ 200
40060CLASS 4.0 x 60 8x2½ 200
40040CLAB 4.0 x 40 8 x 1½ 200
40070CLASS 4.0 x 70 8x2¾ 200
45030CLAB 4.5 x 30 9 x 1¼ 200
45025CLASS 4.5 x 25 9 x 5⁄8 200
50030CLAB 5.0 x 30 10 x 1¼ 200
45030CLASS 4.5 x 30 9x1¼ 200
50040CLAB 5.0 x 40 10 x 1½ 200
45040CLASS 4.5 x 40 9x1½ 200
50080CLAB 5.0 x 80 10 x 3 100
45050CLASS 4.5 x 50 9x2 200
45060CLASS 4.5 x 60 9x2½ 200
50025CLASS 5.0 x 25 10 x 1 200
50030CLASS 5.0 x 30 10 x 1 1/4 200
50035CLASS 5.0 x 35 10 x 1 3/8 200
50040CLASS 5.0 x 40 10 x 1 1/2 200
50050CLASS 5.0 x 50 10 x 2 200
50060CLASS 5.0 x 60 10 x 2 1/2 200
50070CLASS 5.0 x 70 10 x 2 3/4 200
50080CLASS 5.0 x 80 10 x 3 200
50090CLASS 5.0 x 90 10 x 3 1/2 100
50100CLASS 5.0 x 100 10 x 4 100
60040CLASS 6.0 x 40 12 x 1 1/2 200
60050CLASS 6.0 x 50 12 x 2 200
60060CLASS 6.0 x 60 12 x 2 1/2 200
60070CLASS 6.0 x 70 12 x 2 3/4 200
60080CLASS 6.0 x 80 12 x 3 200
60100CLASS 6.0 x 100 12 x 4 100
60130CLASS 6.0 x 130 12 x 5 100
60150CLASS 6.0 x 150 12 x 6 100
14
SOLO WOODSCREWS TIMBER CONSTRUCTION SCREWS
SOLO Materials
Single threaded woodscrew

To BS
EN ISO
14592:2
008
A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry
with a plastic plug.
SOLO - Yellow
Double Countersunk
Qty Qty
Tubs 45050SOLOC 4.5 x 50 9x2 200

45060SOLOC 4.5 x 60 9 x 2½ 200
35025STUBY 3.5 x 25 6x1 2,000
45070SOLOC 4.5 x 70 9 x 2¾ 200
35030STUBY 3.5 x 30 6 x 1¼ 1,800
45080SOLOC 4.5 x 80 9x3 200
40025STUBY 4.0 x 25 8x1 1,700
50025SOLOC 5.0 x 25 10 x 1 200
40030STUBY 4.0 x 30 8 x 1¼ 1,250
50030SOLOC 5.0 x 30 10 x 1¼ 200
40040STUBY 4.0 x 40 8 x 1½ 1,000
50035SOLOC 5.0 x 35 10 x 13⁄8 200
40050STUBY 4.0 x 50 8x2 800
50040SOLOC 5.0 x 40 10 x 1½ 200
50040STUBY 5.0 x 40 10 x 1½ 800
50045SOLOC 5.0 x 45 10 x 1¾ 200
50050STUBY 5.0 x 50 10 x 2 525
50050SOLOC 5.0 x 50 10 x 2 200
50060STUBY 5.0 x 60 10 x 2½ 400
50060SOLOC 5.0 x 60 10 x 2½ 200
50070STUBY 5.0 x 70 10 x 2¾ 375
50070SOLOC 5.0 x 70 10 x 2¾ 200
50080STUBY 5.0 x 80 10 x 3 325
50075SOLOC 5.0 x 75 10 x 3 200
50100STUBY 5.0 x 100 10 x 4 250
50080SOLOC 5.0 x 80 10 x 3 200
Boxes 50090SOLOC 5.0 x 90 10 x 3½ 100
30012SOLOC 3.0 x 12 4x½ 200 50100SOLOC 5.0 x 100 10 x 4 100
30015SOLOC 3.0 x 15 4 x 5⁄8 200 60040SOLOC 6.0 x 40 12 x 1½ 200
30017SOLOC 3.0 x 17 4 x 43⁄64 200 60050SOLOC 6.0 x 50 12 x 2 200
30020SOLOC 3.0 x 20 4x¾ 200 60060SOLOC 6.0 x 60 12 x 2½ 200
30025SOLOC 3.0 x 25 4x1 200 60070SOLOC 6.0 x 70 12 x 2¾ 200
30030SOLOC 3.0 x 30 4 x 1¼ 200 60080SOLOC 6.0 x 80 12 x 3 200
35012SOLOC 3.5 x 12 6 x 1/2 200 60090SOLOC 6.0 x 90 12 x 3½ 100
35015SOLOC 3.5 x 15 6 x 5/8 200 60100SOLOC 6.0 x 100 12 x 4 100
35017SOLOC 3.5 x 17 6 x 43⁄64 200 60120SOLOC 6.0 x 120 12 x 4¾ 100
35020SOLOC 3.5 x 20 6x¾ 200 60130SOLOC 6.0 x 130 12 x 51⁄8 100
35025SOLOC 3.5 x 25 6x1 200 60150SOLOC 6.0 x 150 12 x 6 100
35030SOLOC 3.5 x 30 6 x 1¼ 200
Bags
35035SOLOC 3.5 x 35 6 x 13⁄8 200
35040SOLOC 3.5 x 40 6 x 1½ 200 35015CHYB 3.5 x 15 6 x 5⁄8 750
35050SOLOC 3.5 x 50 6x2 200 35030CHYB 3.5 x 30 6x1¼ 500
40015SOLOC 4.0 x 15 8 x 5⁄8 200 40025CHYB 4.0 x 25 8x1 470
40017SOLOC 4.0 x 17 8 x 43⁄64 200 40030CHYB 4.0 x 30 8x1¼ 430
40020SOLOC 4.0 x 20 8x¾ 200 40035CHYB 4.0 x 35 8 x 1 3⁄8 380
40025SOLOC 4.0 x 25 8x1 200 40040CHYB 4.0 x 40 8x1½ 350
40030SOLOC 4.0 x 30 8 x 1¼ 200 40050CHYB 4.0 x 50 8x2 280
40035SOLOC 4.0 x 35 8 x 13⁄8 200 40060CHYB 4.0 x 60 8x2½ 230
40040SOLOC 4.0 x 40 8 x 1½ 200 50040CHYB 5.0 x 40 10 x 1 ½ 230
40045SOLOC 4.0 x 45 8 x 1¾ 200 50050CHYB 5.0 x 50 10 x 2 180
40050SOLOC 4.0 x 50 8x2 200 50060CHYB 5.0 x 60 10 x 2 ½ 160
40060SOLOC 4.0 x 60 8 x 2½ 200 50070CHYB 5.0 x 70 10 x 2 ¾ 140
40070SOLOC 4.0 x 70 8 x 2¾ 200 50080CHYB 5.0 x 80 10 x 3 120
45020SOLOC 4.5 x 20 9x¾ 200 50100CHYB 5.0 x 100 10 x 4 90
45030SOLOC 4.5 x 30 9 x 1¼ 200 60080CHYB 6.0 x 80 12 x 3 90
45035SOLOC 4.5 x 35 9 x 13⁄8 200 60120CHYB 6.0 x 120 12 x 4 ¾ 50
45040SOLOC 4.5 x 40 9 x 1½ 200 60150CHYB 6.0 x 150 12 x 6 35
45045SOLOC 4.5 x 45 9 x 1¾ 200
15
TIMBER CONSTRUCTION SCREWS SOLO WOODSCREWS
SOLO - Yellow Product Size Size

Qty
Double Countersunk Code (Metric) (Imp. equiv.)
40050SOLOZ 4.0 x 50 8x2 200
40060SOLOZ 4.0 x 60 8 x 2½ 200
40070SOLOZ 4.0 x 70 8 x 2¾ 200
40080SOLOZ 4.0 x 80 8x3 200
45040SOLOZ 4.5 x 40 9 x 1½ 200
Product Size Size 45050SOLOZ 4.5 x 50 9x2 200
Qty 45060SOLOZ 4.5 x 60 9 x 2½ 200
45070SOLOZ 4.5 x 70 9 x 2¾ 200
Packs 45080SOLOZ 4.5 x 80 9x3 200
50025SOLOZ 5.0 x 25 10 x 1 200
35015CHYP 3.5 x 15 6 x 5⁄8 45
50030SOLOZ 5.0 x 30 10 x 1¼ 200
35030CHYP 3.5 x 30 6x1¼ 35
50040SOLOZ 5.0 x 40 10 x 1½ 200
40025CHYP 4.0 x 25 8x1 30
50045SOLOZ 5.0 x 45 10 x 1¾ 200
40030CHYP 4.0 x 30 8x1¼ 25
50050SOLOZ 5.0 x 50 10 x 2 200
40035CHYP 4.0 x 35 8 x 1 3⁄8 22
50060SOLOZ 5.0 x 60 10 x 2½ 200
40040CHYP 4.0 x 40 8x1½ 20
50070SOLOZ 5.0 x 70 10 x 2¾ 200
40050CHYP 4.0 x 50 8x2 16
50080SOLOZ 5.0 x 80 10 x 3 200
40060CHYP 4.0 x 60 8x2½ 12
50090SOLOZ 5.0 x 90 10 x 3½ 100
50040CHYP 5.0 x 40 10 x 1 ½ 10
50100SOLOZ 5.0 x 100 10 x 4 100
50050CHYP 5.0 x 50 10 x 2 12
60050SOLOZ 6.0 x 50 12 x 2 200
50060CHYP 5.0 x 60 10 x 2 ½ 10
60060SOLOZ 6.0 x 60 12 x 2½ 200
50070CHYP 5.0 x 70 10 x 2 ¾ 8
60080SOLOZ 6.0 x 80 12 x 3 200
50080CHYP 5.0 x 80 10 x 3 6
60100SOLOZ 6.0 x 100 12 x 4¾ 100
50100CHYP 5.0 x 100 10 x 4 4
60120SOLOZ 6.0 x 120 12 x 51⁄8 100
60080CHYP 6.0 x 80 12 x 3 4
60150SOLOZ 6.0 x 150 12 x 6 100
60120CHYP 6.0 x 120 12 x 4 ¾ 2
60150CHYP 6.0 x 150 12 x 6 2
SOLO SQUARE RECESS - Zinc

SOLO - Zinc (CR3) Double Countersunk
Double Countersunk
Product Size Size

Qty
Product Size Size
Qty
Boxes
40020SQSZ 4.0 x 20 8x¾ 200
Tubs
40025SQSZ 4.0 x 25 8x1 200
40030STUBZ 4.0 x 30 8 x 1¼ 1,250
40040SQSZ 4.0 x 40 8 x 1½ 200
40040STUBZ 4.0 x 40 8 x 1½ 1,000
50040SQSZ 5.0 x 40 10 x 1½ 200
40050STUBZ 4.0 x 50 8x2 800
50050SQSZ 5.0 x 50 10 x 2 200
50050STUBZ 5.0 x 50 10 x 2 525
50060STUBZ 5.0 x 60 10 x 2½ 400 50080SQSZ 5.0 x 80 10 x 3 200
50070STUBZ 5.0 x 70 10 x 2¾ 375
50080STUBZ 5.0 x 80 10 x 3 325
50100STUBZ 5.0 x 100 10 x 4 250
Boxes SOLO SQUARE RECESS - Zinc
30012SOLOZ 3.0 x 12 4x½ 200 Pan Head
30015SOLOZ 3.0 x 15 4 x 5⁄8 200
35015SOLOZ 3.5 x 15 6 x 5⁄8 200
35020SOLOZ 3.5 x 20 6x¾ 200
35025SOLOZ 3.5 x 25 6x1 200
35030SOLOZ 3.5 x 30 6 x 1¼ 200
35035SOLOZ 3.5 x 35 6 x 13⁄8 200
Product Size Size
35040SOLOZ 3.5 x 40 6 x 1½ 200 Qty
35050SOLOZ 3.5 x 50 6x2 200
40015SOLOZ 4.0 x 15 8 x 5⁄8 200
40020SOLOZ 4.0 x 20 8x¾ 200
Boxes
40025SOLOZ 4.0 x 25 8x1 200 40020SQPSZ 4.0 x 20 8x¾ 200
40030SOLOZ 4.0 x 30 8 x 1¼ 200 40025SQPSZ 4.0 x 25 8x1 200
40035SOLOZ 4.0 x 35 8 x 13⁄8 200 40040SQPSZ 4.0 x 40 8 x 1½ 200
40040SOLOZ 4.0 x 40 8 x 1½ 200 50040SQPSZ 5.0 x 40 10 x 1½ 200
40045SOLOZ 4.0 x 45 8 x 1¾ 200
16
TWIN-THREADED WOODSCREWS TIMBER CONSTRUCTION SCREWS
TWIN-THREADED Materials
Woodscrew
Available in: Zinc (CR3)
To BS
EN ISO
14592:2
008
A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or
into masonry with a plastic plug.
TWIN-THREADED
Double Countersunk

Qty Qty
Code (Imp.) (Metric) Code (Imp.) (Metric)
Boxes 00104CWZ 10 x 4 5.0 x 100 100

00121CWZ 12 x 1 6.0 x 25 200
00412CWZ 4x½ 3.0 x 12 200
12114CWZ 12 x 1¼ 6.0 x 30 200
00458CWZ 4 x 5⁄8 3.0 x 16 200
12112CWZ 12 x 1½ 6.0 x 40 200
00434CWZ 4x¾ 3.0 x 20 200
00122CWZ 12 x 2 6.0 x 50 200
00041CWZ 4x1 3.0 x 25 200
12212CWZ 12 x 2½ 6.0 x 60 200
00558CWZ 5 x 5⁄8 3.3 x 16 200
00123CWZ 12 x 3 6.0 x 75 200
00534CWZ 5x¾ 3.3 x 19 200
00123CWZ100 12 x 3 6.0 x 75 100
00612CWZ 6x½ 3.5 x 12 200
12312CWZ 12 x 3½ 6.0 x 90 100
00658CWZ 6 x 5⁄8 3.5 x 16 200
00124CWZ 12 x 4 6.0 x 100 100
00634CWZ 6x¾ 3.5 x 20 200
00061CWZ 6x1 3.5 x 25 200 Bags
06114CWZ 6x1¼ 3.5 x 30 200 00658CWZB 6 x 5⁄8 3.5 x 15 700
06112CWZ 6x1½ 3.5 x 40 200 00634CWZB 6x¾ 3.5 x 20 620
06134CWZ 6x1¾ 3.5 x 45 200 00061CWZB 6x1 3.5 x 25 500
00062CWZ 6x2 3.5 x 50 200 00834CWZB 8x¾ 4.0 x 20 540
00758CWZ 7 x 5⁄8 3.9 x 16 200 00081CWZB 8x1 4.0 x 25 470
00734CWZ 7x¾ 3.9 x 20 200 08114CWZB 8 x 1¼ 4.0 x 30 390
00071CWZ 7x1 3.9 x 25 200 08112CWZB 8 x 1½ 4.0 x 40 350
07114CWZ 7 x 1¼ 3.9 x 30 200 00082CWZB 8x2 4.0 x 50 270
07112CWZ 7 x 1½ 3.9 x 40 200 08212CWZB 8 x 2½ 4.0 x 60 200
00812CWZ 8x½ 4.0 x 12 200 00083CWZB 8x3 4.0 x 80 180
00858CWZ 8 x 5⁄8 4.0 x 16 200 10112CWZB 10 x 1½ 5.0 x 40 250
00834CWZ 8x¾ 4.0 x 20 200 00102CWZB 10 x 2 5.0 x 50 190
00081CWZ 8x1 4.0 x 25 200 10212CWZB 10 x 2½ 5.0 x 60 160
08114CWZ 8 x 1¼ 4.0 x 30 200 00103CWZB 10 x 3 5.0 x 80 140
08112CWZ 8 x 1½ 4.0 x 40 200 00104CWZB 10 x 4 5.0 x 100 90
08134CWZ 8 x 1¾ 4.0 x 45 200 Packs
00082CWZ 8x2 4.0 x 50 200
00658CWZP 6 x 5⁄8 3.5 x 15 45
08214CWZ 8 x 2¼ 4.0 x 55 200
00634CWZP 6x¾ 3.5 x 20 40
08212CWZ 8 x 2½ 4.0 x 60 200
00061CWZP 6x1 3.5 x 25 35
00083CWZ 8x3 4.0 x 75 200
00834CWZP 8x¾ 4.0 x 20 35
00083CWZ100 8x3 4.0 x 75 100
00081CWZP 8x1 4.0 x 25 30
01034CWZ 10 x ¾ 5.0 x 20 200
08114CWZP 8 x 1¼ 4.0 x 30 25
00101CWZ 10 x 1 5.0 x 25 200
08112CWZP 8 x 1½ 4.0 x 40 20
10114CWZ 10 x 1¼ 5.0 x 30 200
00082CWZP 8x2 4.0 x 50 16
10112CWZ 10 x 1½ 5.0 x 40 200
08212CWZP 8 x 2½ 4.0 x 60 12
10134CWZ 10 x 1¾ 5.0 x 45 200
00083CWZP 8x3 4.0 x 80 10
00102CWZ 10 x 2 5.0 x 50 200
10112CWZP 10 x 1½ 5.0 x 40 15
10214CWZ 10 x 2¼ 5.0 x 55 200
00102CWZP 10 x 2 5.0 x 50 12
10212CWZ 10 x 2½ 5.0 x 60 200
10212CWZP 10 x 2½ 5.0 x 60 10
00103CWZ 10 x 3 5.0 x 75 200
00103CWZP 10 x 3 5.0 x 80 8
00103CWZ100 10 x 3 5.0 x 75 100
00104CWZP 10 x 4 5.0 x 100 6
10312CWZ 10 x 3½ 5.0 x 90 100
17
TIMBER CONSTRUCTION SCREWS TWIN-THREADED & BLACKJAX SCREWS
ROUNDHEAD TWIN-THREADED Materials
Woodscrew
To BS
Available in: Zinc (CR3) EN ISO

14592:2
008
A traditional sharp point screw with a twin-thread

for a fast installation, mainly used in soft timber
applications or into masonry with a plastic plug.
TWIN-THREADED
Roundhead
Qty Qty
Boxes Boxes
00412CRWZ 4x½ 3.0 x 12 200 08114CRWZ 8 x 1¼ 4.0 x 30 200
00458CRWZ 4 x 5⁄8 3.0 x 16 200 08112CRWZ 8 x 1½ 4.0 x 40 200
00612CRWZ 6x½ 3.5 x 12 200 00082CRWZ 8x2 4.0 x 50 200
00658CRWZ 6 x 5⁄8 3.5 x 16 200 00101CRWZ 10 x 1 5.0 x 25 200
00634CRWZ 6x¾ 3.5 x 20 200 10114CRWZ 10 x 1¼ 5.0 x 30 200
00061CRWZ 6x1 3.5 x 25 200 10112CRWZ 10 x 1½ 5.0 x 40 200
06114CRWZ 6 x 1¼ 3.5 x 30 200 00102CRWZ 10 x 2 5.0 x 50 200
00812CRWZ 8x½ 4.0 x 12 200 10212CRWZ 10 x 2½ 5.0 x 60 200
00858CRWZ 8 x 5⁄8 4.0 x 16 200 00103CRWZ 10 x 3 5.0 x 75 200
00834CRWZ 8x¾ 4.0 x 20 200 12112CRWZ 12 x 1½ 6.0 x 40 200
00081CRWZ 8x1 4.0 x 25 200 00122CRWZ 12 x 2 6.0 x 50 200
BLACKJAX Materials
Roundhead woodscrew
To BS
Available in: Black Phos.

EN ISO
14592:2
008
A twin-threaded wood screw with a black japanned

finish designed to be used with black ironmongery.
BLACKJAX
Roundhead
Qty Qty
Boxes Packs
00658BJC 6 x 5⁄8 3.5 x 16 200 00061BJCP 6x1 3.5 x 25 45
00634BJC 6x¾ 3.5 x 20 200 00081BJCP 8x1 4.0 x 25 40
00061BJC 6x1 3.5 x 25 200 08112BJCP 8x1½ 4.0 x 40 35
00858BJC 8 x 5⁄8 4.0 x 16 200 10112BJCP 10 x 1 ½ 5.0 x 40 35
00834BJC 8x¾ 4.0 x 20 200
00081BJC 8x1 4.0 x 25 200
08114BJC 8 x 1¼ 4.0 x 30 200
08112BJC 8 x 1½ 4.0 x 40 200
00082BJC 8x2 4.0 x 50 200
00101BJC 10 x 1 5.0 x 25 200
10114BJC 10 x 1¼ 5.0 x 30 200
10112BJC 10 x 1½ 5.0 x 40 200
00102BJC 10 x 2 5.0 x 50 200
18
CARCASS, MIRROR SCREWS & CAPS TIMBER CONSTRUCTION SCREWS
CARCASS SCREWS Materials
Woodscrew
Available in: Black Phos.
Designed for construction of furniture carcasses.
CARCASS SCREWS
Countersunk
Product Size Size

Qty
Boxes
40033CARC 4.0 x 33 8 x 1¼ 500
40045CARC 4.0 x 45 8 x 1¾ 500
MIRROR SCREWS PLASTIDOME SCREW CAPS

Dome head Two piece cap and washer which provides a
decorative finish and a protective cap.
For hanging a mirror where an aesthetic finish

is required. Product To Fit
Finish Qty
Code (mm)
Product Screw Size Cover
Qty
Code (Imp.) Type Bags
WHITEPLAST 3.5 - 4.2 White 100
Packs CHROMEPLAST 3.5 - 4.2 Chrome 100
08114CMIRP 8 x 1¼ Chrome 10 BROWNPLAST 3.5 - 4.2 Brown 100
08112CMIRP 8 x 1½ Chrome 8 BLACKPLAST 3.5 - 4.2 Black 100
Boxes
00081CMIR200 8x1 Chrome 200
08114CMIR200 8 x 1¼ Chrome 200
08112CMIR200
00834BMIR200
8 x 1½
8x¾
Chrome
Polished Brass
200
200
SCREW CUPS
00081BMIR200 8x1 Polished Brass 200 A surface screw cup designed to allow the head of
08114BMIR200 8 x 1¼ Polished Brass 200 the screw to sit proud giving a decorative finish.
08112BMIR200 8 x 1½ Polished Brass 200
00082BMIR200 8x2 Polished Brass 200
HINGED COVER Product To Fit

CAPS Code (mm)
Finish Qty
For cosmetic use to Packs

conceal screws. 6BCUPP 6 Brass 60
8BCUPP 8 Brass 55
Product To Fit 10BCUPP 10 Brass 50
Colour Qty
Code (mm) 6NCUPP 6 Nickel 60
8NCUPP 8 Nickel 55
Bags
10NCUPP 10 Nickel 50
SHCCWHITEP 3.5 - 5 White 100
SHCCBLACKP 3.5 - 5 Black 100
LHCCWHITEP 5 - 10 White 50
LHCCBLACKP 5 - 10 Black 50
19
TIMBER CONSTRUCTION SCREWS MIXED TRAYS & MIXED PACKS
MIXED TRAYS - ASSORTED SIZES

Classic / Twin-Threaded / Self-Tapping
Product
Description Qty
Code
CLASSIC TRAY Classic Yellow 895

STST TRAY Classic A2 Stainless Steel 895
WOOD TRAY Zinc Twin-Threaded 1,140
STS TRAY Zinc Self-Tapper 1,305
895 895 1140 1305

pcs pcs pcs pcs
Classic® Yellow Classic® A2 SS Twin-Threaded Self-Tapping
3.5 x 16mm 4.0 x 40mm 3.5 x 16mm 4.0 x 40mm 8 x 1¼ 6x½ 8x½ 8x½
200 pcs 70 pcs 200 pcs 70 pcs 85 pcs 180 pcs 180 pcs 100 pcs
3.5 x 25mm 4.0 x 50mm 3.5 x 25mm 4.0 x 50mm 6x¾ 8 x 1½ 6x¼ 8x1
3.5 x 30mm 4.0 x 60mm 3.5 x 30mm 4.0 x 60mm 10 x 2 6x1 10 x ½ 10 x 5⁄8
4.0 x 20mm 5.0 x 40mm 4.0 x 20mm 5.0 x 40mm 8x¾ 6 x 1¼ 8 x 1½ 8x1
4.0 x 25mm 5.0 x 50mm 4.0 x 25mm 5.0 x 50mm 10 x 2½ 6x½ 8x¾ 6x¾
4.0 x 30mm 5.0 x 60mm 4.0 x 30mm 5.0 x 60mm 8x1 8x2 6x½ 8x¾
MIXED PACKS - ASSORTED SIZES

Product
Description Qty
Code
A boxed assortment of popular sizes sold together
for your convenience. CLAFMP Classic Multi-Purpose Screws 1,400
SOLOMP Solo Chipboard Screws 1,400
CWZMP Twin-Threaded Woodscrews 1,400
1400 1400 1400

Classic® Yellow psc Solo Yellow psc Twin-Threaded psc
Size (Metric) Qty Size (Metric) Qty Size (Imperial) Qty

3.5 x 25 200 3.5 x 25 200 8x1 200
4.0 x 30 200 4.0 x 30 200 8 x 1¼ 200
4.0 x 40 200 4.0 x 40 200 8 x 1½ 200
4.0 x 50 200 4.0 x 50 200 8x2 200
5.0 x 50 200 5.0 x 50 200 8 x 2½ 200
5.0 x 60 100 5.0 x 60 100 10 x 1½ 100
5.0 x 70 100 5.0 x 70 100 10 x 2 100
5.0 x 80 100 5.0 x 80 100 10 x 3 100
5.0 x 100 100 5.0 x 100 100 10 x 4 100
20
DECKING SCREWS TIMBER CONSTRUCTION SCREWS
DECKING SCREWS Materials
For decking platforms

To BS
EN ISO
Exterior A2/Aust. SS
14592:2
Available in: 008
C2 DECKING SCREW - Exterior

Double Countersunk
A premium decking screw using the C2 twin cut

technology. Coated with a patented multi-layer
corrosion resistant plating to withstand up to
1000 hrs in a salt spray cabinet. This new and
innovative design enables the screw to rapidly
penetrate the timber, cleanly countersink and
securely clamp the decking board to the joists.
Product Size Size

Qty
Tubs
50C2D250 4.5 x 50 9x2 250
65C2D250 4.5 x 65 9 x 2½ 250
75C2D250 4.5 x 75 9x3 250
65C2D1000 4.5 x 65 9 x 2½ 1000
CLASSIC DECKING SCREW SOLO DECKING SCREW

A2/Aust. SS - Double Countersunk Exterior - Double Countersunk
Used for attaching decking board to a timber An economic but highly effective softwood
substrate. Coated with a patented multi-layer decking screw. Plated to withstand up to 500 hrs
corrosion resistant plating this screw is ideal for in a salt spray cabinet and designed to give a rapid
outdoor applications. installation and a secure fixing.

Qty Qty
Tubs Boxes
50DEXSS250 4.5 x 50 9x2 250 50SOLOD200 4.5 x 50 9x2 200
65DEXSS250 4.5 x 65 9 x 2½ 250 60SOLOD200 4.5 x 60 9 x 2½ 200
70SOLOD200 4.5 x 70 9 x 2¾ 200
Tubs
60SOLOD1000 4.5 x 60 9 x 2½ 1000
21
TIMBER CONSTRUCTION SCREWS IN-DEX TIMBER SCREWS
IN-DEX TIMBER SCREWS

For timber constructions
To BS
EN ISO
Exterior A4 SS A2/Aust. SS
14592:2
Available in: 008
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated
with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Also available
with a wafer head for improved clamping or a low profile finish.
HEX HEAD - Exterior WAFER HEAD - Exterior

8mm Hex Head T30/T40 Recess
Product Size Product Size Bit

A/F Qty Qty
Code (Metric) Code (Metric) Type
Boxes Boxes
60IN 6.7 x 60 8 50 95INW 6.7 x 95 T30 50
75IN 6.7 x 75 8 50 125INW 6.7 x 125 T30 50
87IN 6.7 x 87 8 50 150INW 6.7 x 150 T30 50
100IN 6.7 x 100 8 50 175INW 6.7 x 175 T30 50
125IN 6.7 x 125 8 50 200INW 8.0 x 200 T40 50
150IN 6.7 x 150 8 50 225INW 8.0 x 225 T40 50
200IN 6.7 x 200 8 50 250INW 8.0 x 250 T40 50
250IN 6.7 x 250 8 50 275INW 8.0 x 275 T40 25
Bags 300INW 8.0 x 300 T40 25
100INDEXTB 6.7 x 100 8 50 350INW 8.0 x 350 T40 25
150INDEXTB 6.7 x 150 8 30 400INW 8.0 x 400 T40 25
200INDEXTB 6.7 x 200 8 20 Bags
Packs 95INDEXWB 6.7 x 95 T30 50
100INDEXP 6.7 x 100 8 6 125INDEXWB 6.7 x 125 T30 30
150INDEXP 6.7 x 150 8 4 150INDEXWB 6.7 x 150 T30 20
Packs
95INDEXWP 6.7 x 95 T30 6
125INDEXWP 6.7 x 125 T30 5
HEX HEAD - A4 SS
150INDEXWP 6.7 x 150 T30 4
8mm Hex Head
WAFER HEAD - A2/Aust. SS

T40 Recess
Product Size
A/F Qty
Code (Metric)
Telescopic Tubes
75INDEXSST 6.7 x 75 8 25
Product Size Bit
100INDEXSST 6.7 x 100 8 25 Qty
Code (Metric) Type
125INDEXSST 6.7 x 125 8 25
150INDEXSST 6.7 x 150 8 25 Boxes (Driver Bit Included)
80INDEXWSS 8.0 x 80 T40 25
22
IN-DEX SCREWS & CARRIAGE BOLTS TIMBER CONSTRUCTION SCREWS
HEAVY DUTY TIMBER SCREWS

For heavy duty timber constructions
To BS
EN ISO
Exterior
14592:2
Available in: 008
The heavy duty in-dex screw dramatically decreases installation time as it doesn’t require a pilot hole into most
wood types and can be installed with a power tool. Coated with patented multi-layer corrosion resistant plating to
achieve 1,000 hours salt spray test. This screw is ideal for outdoor applications or where extra strength is required.
HEX HEAD - Exterior

10mm Hex Head
Product Size
A/F Qty
Code (Metric)
Bags (Socket driver Included)

875INH 8.0 x 75 10 10
8100INH 8.0 x 100 10 10
8150INH 8.0 x 150 10 10
8200INH 8.0 x 200 10 10
10100INH 10.0 x 100 13 10
10150INH 10.0 x 150 13 10
10200INH 10.0 x 200 13 10
COACH SCREWS CARRIAGE BOLTS

Exterior woodscrew Exterior bolt & nut
Available in: Exterior Available in: Exterior
To BS To BS
EN ISO EN ISO
14592:2 14592:2
008 008
A traditional way of fastening timber applications, A heavy duty bolt used for fastening timbers. It
but has the added advantage of a corrosion resistant has an impact resistant dome head and the square
plating finish for external applications. under the head locks into the timber to stop the
bolt from spinning.
Product Size Product Size
A/F Qty A/F Qty
Code (Metric) Code (Metric)
Bags Bags
640INCSB 6 x 40 10 10 10100INCB 10 x 100 17 10
650INCSB 6 x 50 10 10 10150INCB 10 x 150 17 10
675INCSB 6 x 75 10 10 10160INCB 10 x 160 17 10
850INCSB 8 x 50 13 10 10200INCB 10 x 200 17 10
875INCSB 8 x 75 13 10 10220INCB 10 x 220 17 10
8100INCSB 8 x 100 13 10
8120INCSB 8 x 120 13 10
10100INCSB 10 x 100 17 10
10130INCSB 10 x 130 17 10
10150INCSB 10 x 150 17 10
23
TIMBER CONSTRUCTION SCREWS COACH SCREWS & NYLON PLUGS
COACH SCREWS Materials

*
Used in wood & brick (with nylon plugs)
To BS
EN ISO
14592:2
008
A traditional heavy duty woodscrew used for timber to timber applications, attaching
ironmongery to timber and into masonry with a nylon plug.
Product Thread x Length A/F Product Thread x Length A/F

Qty Qty
Code (mm) (mm) Code (mm) (mm)
Boxes 10130CSCB 10 x 130 17 23

10150CSCB 10 x 150 17 18
0625CSC 6 x 25 10 250
1280CSCB 12 x 80 19 25
0630CSC 6 x 30 10 250
12100CSCB 12 x 100 19 20
0640CSC 6 x 40 10 200
0650CSC 6 x 50 10 200 12150CSCB 12 x 150 19 12
0660CSC 6 x 60 10 200 Packs
0665CSC 6 X 65 10 200 0650CSCP 6 x 50 10 10
0670CSC 6 x 70 10 200 0670CSCP 6 x 70 10 10
0675CSC 6 x 75 10 100 06100CSCP 6 x 100 10 10
0680CSC 6 x 80 10 100 0850CSCP 8 x 50 13 5
06100CSC 6 x 100 10 200 0860CSCP 8 x 60 13 5
0830CSC 8 x 30 13 200 0880CSCP 8 x 80 13 5
0840CSC 8 x 40 13 200 08100CSCP 8 x 100 13 5
0850CSC 8 x 50 13 100 1050CSCP 10 x 50 17 4
0860CSC 8 x 60 13 100 1080CSCP 10 x 80 17 4
0865CSC 8 x 65 13 100 10150CSCP 10 x 150 17 2
0870CSC 8 x 70 13 100 1275CSCP 12 x 75 19 2
0875CSC 8 x 75 13 100
0880CSC 8 x 80 13 100
0890CSC 8 x 90 13 50
08100CSC 8 x 100 13 50
COACH SCREWS & NYLON PLUGS
08120CSC 8 x 120 13 50 Used In Brick *
08150CSC 8 x 150 13 50
1040CSC 10 x 40 17 100
1050CSC 10 x 50 17 100
1060CSC 10 x 60 17 100
1070CSC 10 x 70 17 100 Product Thread x Length A/F
Qty
1075CSC 10 x 75 17 100 Code (mm) (mm)
1080CSC 10 x 80 17 50
10100CSC 10 x 100 17 50 Bags
10120CSC 10 x 120 17 50 0660CSCNB 6 x 60 10 40
10130CSC 10 x 130 17 50 0680CSCNB 6 x 80 10 30
10150CSC 10 x 150 17 25 08100CSCNB 8 x 100 13 12
10160CSC 10 x 160 17 25
Packs
10200CSC 10 x 200 17 20
0660CSCNP 6 x 60 10 2
1250CSC 12 x 50 19 100
0680CSCNP 6 x 80 10 2
1275CSC 12 x 75 19 50
08100CSCNP 8 x 100 13 2
1280CSC 12 x 80 19 25
12100CSC 12 x 100 19 25
12150CSC 12 x 150 19 25
Bags NYLON PLUGS
0650CSCB 6 x 50 10 120 Product Drill Hole Length
0670CSCB 6 x 70 10 100 Qty
Code 0 (mm)
06100CSCB 6 x 100 10 70
0850CSCB 8 x 50 13 75 Bags
0860CSCB 8 x 60 13 65 06NLPB 10 30 200
0880CSCB 8 x 80 13 48 08NLPB 10 40 100
08100CSCB 8 x 100 13 40 10NLPB 12 50 70
1050CSCB 10 x 50 17 45 Packs
1080CSCB 10 x 80 17 30
06NLPP 10 30 20
10100CSCB 10 x 100 17 35
08NLPP 10 40 10
10120CSCB 10 x 120 17 24 10NLPP 12 50 5
24
DRY LINING
CONSTRUCTION
SCREWS
26 - DRYWALL SCREWS
28 - COLLATED SCREWS
DRY LINING CONSTRUCTION SCREWS DRYWALL SCREWS
DRYWALL SCREWS
Coarse, fine and reverse thread available
Available in: Black Phos. Zinc (CR3) Yellow To BS
EN ISO
14592:
2008
Phillips Bugle Head drywall screws have a bugle head to prevent damage or tearing of the plasterboard.
COARSE THREAD - Black Phos. FINE THREAD - Black Phos.

For board to timber For board to light steel
Used to secure plasterboard to timber stud work. Used to secure plasterboard to drywall track and
ceiling track systems (Max 0.9mm)

Qty Qty
Code (Metric) Code (Metric)
Tubs Tubs
00032DRYCT 3.5 x 32 2,000 00032DRYT 3.5 x 32 2,000
00038DRYCT 3.5 x 38 1,500 00038DRYT 3.5 x 38 1,500
Boxes Boxes
00025DRYC 3.5 x 25 1,000 00025DRY 3.5 x 25 1,000
00032DRYC 3.5 x 32 1,000 00032DRY 3.5 x 32 1,000
00035DRYC 3.5 x 35 1,000 00038DRY 3.5 x 38 1,000
00038DRYC 3.5 x 38 1,000 00042DRY 3.5 x 42 1,000
00042DRYC 3.5 x 42 1,000 00045DRY 3.5 x 45 1,000
00050DRYC 3.5 x 50 1,000 00050DRY 3.5 x 50 1,000
00065DRYC 4.2 x 65 500 00055DRY 3.5 x 55 500
00075DRYC 4.2 x 75 500 00060DRY 3.5 x 60 500
00100DRYC 4.8 x 100 500 00065DRY 4.2 x 65 500
Bags 00075DRY 4.2 x 75 500
00032DRYCB 3.5 x 32 400 00090DRY 4.8 x 90 500
00038DRYCB 3.5 x 38 350 00100DRY 4.8 x 100 500
00050DRYCB 3.5 x 50 250 Boxes of 200’s
00025DRYS 3.5 x 25 200
00032DRYS 3.5 x 32 200
00038DRYS 3.5 x 38 200
COARSE THREAD - Yellow 00042DRYS 3.5 x 42 200
For board to timber 00045DRYS 3.5 x 45 200
00050DRYS 3.5 x 50 200
00060DRYS 3.5 x 60 200
00065DRYS 4.2 x 65 200
00075DRYS 4.2 x 75 200
00100DRYS 4.8 x 100 200
Used to secure plasterboard to timber stud work.
Bags
00032DRYB 3.5 x 32 400
Product Size 00038DRYB 3.5 x 38 350
Qty
Code (Metric)
00042DRYB 3.5 x 42 320
Boxes 00050DRYB 3.5 x 50 250
00125DRYCY 4.8 x 125 100 00060DRYB 3.5 x 60 200
00150DRYCY 4.8 x 150 100 00075DRYB 4.2 x 75 130
00090DRYB 4.2 x 90 70
26
DRYWALL SCREWS DRY LINING CONSTRUCTION SCREWS
FINE THREAD - Zinc (CR3) REVERSE THREAD - Black Phos.

For board to steel (0.9mm) For dense board to steel (0.9mm)
Used to secure plasterboard to drywall track and Product Size

Qty
ceiling track systems (Max 0.9mm) Code (Metric)
Product Size
Boxes
Qty 00025DRYR 3.9 x 25 1,000
Code (Metric)
00038DRYR 3.9 x 38 1,000
Boxes 00042DRYR 3.9 x 42 1,000
00025DRYZ 3.5 x 25 1,000
00032DRYZ 3.5 x 32 1,000
00038DRYZ 3.5 x 38 1,000
00042DRYZ 3.5 x 42 1,000 DENSE BOARD - Black Phos.
00045DRYZ 3.5 x 45 1,000 For dense board to timber
00050DRYZ 3.5 x 50 1,000
00055DRYZ 3.5 x 55 500
00060DRYZ 3.5 x 60 500
00065DRYZ 4.2 x 65 500
00075DRYZ 4.2 x 75 500 Product Size
00090DRYZ 4.8 x 90 500 Qty
Code (Metric)
00100DRYZ 4.8 x 100 500
00125DRYZ 4.8 x 125 100 Boxes
00150DRYZ 4.8 x 150 100 00030DRYD 3.9 x 30 1,000
00045DRYD 3.9 x 45 1,000
00055DRYD 3.9 x 55 1,000
SELF-DRILL - Zinc (CR3)

For board to steel (2.5mm)
SHARP POINT
WAFER HEAD - Zinc (CR3)
(Max Drill Thickness: 0.9mm)

Used to secure plasterboard to drywall track and
ceiling track systems (Max 2.5-3.0mm) Product Size
Qty
Code (Metric)
Product Size
Code (Metric)
Qty Boxes
08916WHSP 4.2 x 13.5 1,000
Boxes
00025PSDD 3.5 x 25 1,000
00032PSDD 3.5 x 32 1,000
00038PSDD 3.5 x 38 1,000 SELF-DRILL
00042PSDD 3.5 x 42 1,000 WAFER HEAD - Zinc (CR3)
00050PSDD 3.5 x 50 1,000
00055PSDD 3.5 x 55 500
00065PSDD 3.9 x 65 500
00075PSDD 4.2 x 75 500 (Max Drill Thickness: 2.5mm)
00100PSDD 4.8 x 100 500
00125PSDD 4.8 x 125 100 Product Size
Qty
Code (Metric)
Bags
00032PSDDB 3.5 x 32 400 Boxes
00042PSDDB 3.5 x 42 320 08916WHSD 4.2 x 13.5 1,000
00016WHSD 4.2 x 16 1,000
00019WHSD 4.2 x 19 1,000
00025WHSD 4.2 x 25 1,000
27
DRY LINING CONSTRUCTION SCREWS COLLATED SCREWS
COLLATED SCREWS
A variety of collated fasteners to suit multiple applications.
Available in: Black Pass. Zinc (CR3) Yellow A2/Aust. SS Exterior To BS
EN ISO
14592:
2008
COARSE THREAD - Black Pass. SELF-DRILL - Zinc (CR3)

For board to timber For board to steel (2.5mm)
Used to secure plasterboard to timber stud work. Product Size

Qty
Code (Metric)
Product Size
Code (Metric)
Qty Boxes
00035COLLSD 3.5 x 35 1,000
Tubs 00045COLLSD 3.5 x 45 1,000
00035CDRYTUB 3.5 x 35 1,000 00050COLLSD 3.5 x 50 1,000
00038CDRYTUB 3.5 x 38 1,000
00045CDRYTUB 3.5 x 45 1,000
00055CDRYTUB 3.5 x 55 800
Boxes
SELF-DRILLING
00025COLDYS 3.5 x 25 1,000 WING TIP - Exterior Zinc (CR3)
00032COLDYS 3.5 x 32 1,000 For light section steel
00035COLDYS 3.5 x 35 1,000
00038COLDYS 3.5 x 38 1,000
00045COLDYS 3.5 x 45 1,000
00050COLDYS 3.5 x 50 1,000
00055COLDYS 3.5 x 55 1,000
00065COLDYS 4.2 x 65 500 Product Size
Plating Qty
00075COLDYS 4.2 x 75 500 Code (Metric)
Boxes
00044COLLW 4.8 x 44 Exterior 1,000
4865COLLW 4.8 x 65 Zinc 1,000
FLOORING SCREW - Yellow

Flooring to timber joists
FINE THREAD - Zinc (CR3) Product Size

Qty
Code (Metric)
For board to steel (0.9mm)
Boxes
00055COLLF 4.2 x 55 1,000
Used to secure plasterboard to drywall track and

ceiling track systems (Max 0.9mm) CLASSIC - A2/Aust. SS
Product Size Timber to timber
Qty
Code (Metric)
Boxes
00025COLDZYS 3.5 x 25 1,000
00032COLDZYS 3.5 x 32 1,000 Product Size
Qty
00035COLDZYS 3.5 x 35 1,000 Code (Metric)
00038COLDZYS 3.5 x 38 1,000
00042COLDZYS 3.5 x 42 1,000 Boxes
00050COLDZYS 3.5 x 50 1,000 4040CLASSCOL 4.0 x 40 1,000
00055COLDZYS 3.5 x 55 1,.000 4050CLASSCOL 4.0 x 50 1,000
28
METAL
CONSTRUCTION
SCREWS
30 - SELF-DRILLING SCREWS 34 - EPDM WASHERS
31 - STITCHING SCREWS 35 - SELA COVERS
32 - COMPOSITE PANEL SCREWS 35 - CORRUGATED SHEET FIXINGS
32 - SLASH POINT SCREWS 36 - METAL FRAMING SCREWS
33 - WING-TIP SCREWS 37 - SELF-TAPPING SCREWS
34 - COVER CAPS 38 - MACHINE SCREWS
METAL CONSTRUCTION SCREWS SELF-DRILLING SCREWS
SELF-DRILLING SCREWS
For joining roofing sheet to section steel
Available in: Exterior Zinc
Self-drilling hexagon head, for joining roofing sheets to light and heavy gauge steel. With or without EPDM
washer. The exterior (Silver Ruspert) plating for a reliable and durable corrosion resistant coating which resists
over 1,000 hours salt-spray.
FOR LIGHT SECTION STEEL

6*/8mm Head, Coarse Thread
Max Drilling
Thickness 3-5mm
For joining roofing sheets to light gauge steel.
EXTERIOR SCREWS - Exterior ZINC SCREWS - Zinc (CR6)
Product Size F Washer EPDM MCT Product Size F Washer EPDM MDT
Qty Qty
Code (mm) (mm) (mm) (mm) Code (mm) (mm) (mm) (mm)
Boxes Boxes
L25B 5.5 x 25 8 N/A 12 100 00812HWSD* 4.2 x 13 12 N/A 2.5 1,000
L25W16B 5.5 x 25 8 16 9 100 00834HWSD* 4.2 x 19 12 N/A 2.5 1,000
L32B 5.5 x 32 8 N/A 19 100 01012HWSD 4.8 x 13 12 N/A 3 1,000
L32W16B 5.5 x 32 8 16 16 100 01058HWSD 4.8 x 16 12 N/A 3 1,000
L38B 5.5 x 38 8 N/A 25 100 01034HWSD 4.8 x 19 12 N/A 3 1,000
L38W16B 5.5 x 38 8 16 22 100 01234HWSD 5.5 x 19 12 N/A 5 500
L50B 5.5 x 50 8 N/A 36 100 00121HWSD 5.5 x 25 12 N/A 5 500
L50W16B 5.5 x 50 8 16 33 100 12114HWSD 5.5 x 32 12 N/A 5 500
L70B 5.5 x 70 8 N/A 63 100 12112HWSD 5.5 x 38 12 N/A 5 500
L70W16B 5.5 x 70 8 16 60 100 12134HWSD 5.5 x 45 12 N/A 5 500
L100B 5.5 x 100 8 N/A 93 100 MDT = Maximum drill thickness.
L100W16B 5.5 x 100 8 16 90 100
Bags Product Size F Washer EPDM MCT
L25BB 5.5 x 25 8 N/A 12 35 Qty
Code (mm) (mm) (mm) (mm)
L25W16BB 5.5 x 25 8 16 9 49
L32BB 5.5 x 32 8 N/A 19 35 Bags
L32W16BB 5.5 x 32 8 16 16 49 ZL19W16 5.5 x 19 11 16 6 35
L38BB 5.5 x 38 8 N/A 25 35 ZL25W16 5.5 x 25 11 16 12 49
L38W16BB 5.5 x 38 8 16 22 49 ZL32W16 5.5 x 32 11 16 19 35
L50BB 5.5 x 50 8 N/A 36 35 ZL38W16 5.5 x 38 11 16 25 49
L50W16BB 5.5 x 50 8 16 33 49 ZL50W16 5.5 x 50 11 16 37 35
L70BB 5.5 x 70 8 N/A 63 35 ZL60W16 5.5 x 60 11 16 47 49
MCT = Maximum clamping thickness. ZL70W16 5.5 x 70 11 16 57 35
MCT = Maximum clamping thickness.
30
SELF-DRILLING & STITCHING SCREWS METAL CONSTRUCTION SCREWS
FOR HEAVY SECTION STEEL

8mm Head, Fine Thread
Used for attaching metal to heavy gauge steel (max

12mm) without the need to pre-drill a hole. Max Drilling
Thickness 12mm
Product Size F Washer EPDM MCT Product Size F Washer EPDM MCT
Qty Qty
Boxes Bags
H32B 5.5 x 32 12 N/A 16 100 ZH32W16 5.5 x 32 10.5 16 9 35
H32W16B 5.5 x 32 12 16 13 100 ZH38W16 5.5 x 38 10.5 16 15 49
H38B 5.5 x 38 12 N/A 18 100 ZH55W16 5.5 x 55 10.5 16 32 35
H38W16B 5.5 x 38 12 16 15 100 ZH80W16 5.5 x 80 10.5 16 57 49
H55B 5.5 x 55 12 N/A 35 100
H55W16B 5.5 x 55 12 16 32 100
H65W16B 5.5 x 65 12 16 42 100
H80W16B 5.5 x 80 12 16 57 100
H100B 5.5 x 100 12 N/A 80 100
H100W16B 5.5 x 100 12 16 77 100
Bags
H38W16BB 5.5 x 38 12 16 15 49
STITCHING SCREWS
For joining cladding sheets
Used for stitching sheet metal without the need to pre-drill a hole. Self-drilling point and tapered shank, with a
washered hexagon head. The exterior (silver ruspert) plating for a reliable and durable corrosion resistant coating,
which resists over 1,000 hours salt-spray.
STITCHING SCREWS
8mm Head, Coarse Thread
Max Drilling
Thickness
EXTERIOR SCREWS - Exterior ZINC SCREWS - Zinc (CR6) 1.7mm
Product Size F Washer EPDM MCT Product Size F Washer EPDM MCT
Qty Qty
Boxes Bags
S22W16B 6.3 x 22 12 16 10 100 ZS22W16 6.3 x 22 13 16 10 22
S25W16B 6.3 x 25 12 16 10 100 MCT = Maximum clamping thickness.
Bags
S25W16BB 6.3 x 25 12 16 10 22
31
METAL CONSTRUCTION SCREWS COMPOSITE PANEL & SLASH POINT
COMPOSITE PANEL ROOFING SCREWS

For joining composite panel to light section steel
Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.
COMPOSITE PANEL TO LIGHT SECTION STEEL

6.3 Ø 5.5 Ø
Min Max
Product Size EPDM
PT PT Qty
Code (mm) (mm)
(mm) (mm)
Boxes
LH82W16B 5.5/6.3 x 82 16 32 63 100
LH98W16B 5.5/6.3 x 98 16 48 78 100
LH115W16B 5.5/6.3 x 115 16 65 95 100
LH115W19B 5.5/6.3 x 115 19 65 95 100 Max Drilling
Thickness 5mm
Min PT = Approximate minimum panel thickness
Max PT = Approximate maximum panel thickness
SLASH POINT ROOFING SCREWS

For joining sheet metal to wood
Designed to attach sheet metal (max 0.9mm) to timber.

Hexagon head with slash point for easy pick up.
Max Drilling
Thickness For
Steel 0.9mm
SLASH POINT FOR TIMBER

Product Size F Washer EPDM MFT Product Size F Washer EPDM MFT
Qty Qty
Boxes Bags
DS32W16B 6.3 x 32 12 16 0.9 100 ZDS25W16 6.3 x 25 13 16 0.9 100
DS45W16B 6.3 x 45 12 16 5 100 ZDS32W16 6.3 x 32 13 16 0.9 100
DS45W19B 6.3 x 45 12 19 5 100 ZDS45W16 6.3 x 45 13 19 5 100
DS60W16B 6.3 x 60 12 16 17 100 ZDS60W16 6.3 x 60 13 16 17 100
DS60W19B 6.3 x 60 12 19 17 100 ZDS90W16 6.3 x 80 13 19 37 100
DS80W16B 6.3 x 80 12 16 37 100 ZDS100W16 6.3 x 100 13 16 57 100
DS100W16B 6.3 x 100 12 16 57 100
MFT = Maximum fixture thickness.
DS150W16B 6.3 x 150 12 16 110 100
Bags
DS32W16BB 6.3 x 32 12 16 0.9 45
DS45W16BB 6.3 x 45 12 16 5 45
32
WING TIP SELF-DRILLING SCREWS METAL CONSTRUCTION SCREWS
WING TIP SELF-DRILLING SCREWS

For joining wood to section steel
Available in: Zinc (CR6) Exterior
Winged roofing screws, for fixing timber to light and heavy section steel. Countersunk head, winged with a
self-drilling point. Light section steel thickness 5mm and heavy section steel thickness 12mm.
FOR LIGHT SECTION STEEL

Coarse Thread
Max Drilling
Thickness 5mm
Specifically designed to attach wood to metal NOTE:
(max 5mm) LW38B has
a MDT of 4mm
Product Size Max FT Product Size Max FT

Qty Qty
Code (Metric) (mm) Code (Metric) (mm)
Boxes Boxes
LW38S 4.8 x 38 18 200 LW38B 4.8 x 38 18 200
LW50S 5.5 x 50 28 200 LW50B 5.5 x 50 28 200
LW65S 5.5 x 65 43 200 LW65B 5.5 x 65 43 200
LW85S 5.5 x 85 63 100 LW85B 5.5 x 85 63 100
LW100S 5.5 x 100 78 100 LW100B 5.5 x 100 78 100
LW130B 5.5 x 130 108 100
Max FT = Maximum fixture thickness.
LW150B 5.5 x 150 128 100
Bags
LW38BB 4.8 x 38 18 35
LW50BB 5.5 x 50 28 35
LW65BB 5.5 x 65 43 35
FOR HEAVY SECTION STEEL

Fine Metric Thread
Specifically designed to attach wood to metal

(max 12mm)
ZINC SCREWS - Zinc (CR6)
Product Size Max FT

Qty
Code (Metric) (mm)
Max Drilling
Boxes Thickness 12mm
HW45B 5.5 x 45 13 200
HW65B 5.5 x 65 29 200
HW85B 5.5 x 85 49 100
HW120B 5.5 x 120 84 100
33
METAL CONSTRUCTION SCREWS COVER CAPS & EPDM WASHERS
COVER CAPS AND EPDM WASHERS

For sealing roofing and cladding screws
A selection of washers and cover caps for use with our range of roofing screws. Cover caps are perfect to blend in
screws with coloured panels.
HEX HEAD COVER CAPS

Bag Quantities of 1,000
Code Code Code Code

Colour Colour
(16mm) (19mm) (16mm) (19mm)
Bags Bags
Black 1600E53CAP 1900E53CAP Merlin Grey 1618B25CAP 1918B25CAP
White 1600E55CAP 1900E55CAP Raven/Slate Blue 1618B29CAP 1918B29CAP
Terracotta 1604C39CAP 1904C39CAP Ocean Blue 1618C39CAP 1918C39CAP
Petra 1604D44CAP 1904D44CAP Solent Blue 1618E53CAP 1918E53CAP
Poppy 1604E53CAP 1904E53CAP Britannia 1618E58CAP 1918E58CAP
Poppy 29mm Code: 2904E53CAP Cornflower 1620E51CAP 1920E51CAP
Tangerine 1606E53CAP 1906E53CAP Flame Red 16RAL3000CAP 19RAL3000CAP
Beige 1608B17CAP 1908B17CAP Burano 16RAL3004CAP 19RAL3004CAP
Vandyke Brown 1608B29CAP 1908B29CAP Ultra Marine 16RAL5002CAP 19RAL5002CAP
Bamboo 1608C35CAP 1908C35CAP Sargasso 16RAL5003CAP 19RAL5003CAP
Goosewing Grey 1610A05CAP 1910A05CAP Mid Blue 16RAL5005CAP 19RAL5005CAP
Mushroom 1610B19CAP 1910B19CAP Gentian Blue 16RAL5010CAP 19RAL5010CAP
Svelte Grey 1610B23CAP 1910B23CAP Heritage 16RAL6002CAP 19RAL6002CAP
Honesty 1610C31CAP 1910C31CAP Squirrel 16RAL7000CAP 19RAL7000CAP
Aztec 1610E55CAP 1910E55CAP Slate Grey 16RAL7012CAP 19RAL7012CAP
Meadowland 1612B17CAP 1912B17CAP Anthracite 16RAL7016CAP 19RAL7016CAP
Moorland Green 1612B21CAP 1912B21CAP Oyster 16RAL7035CAP 19RAL7035CAP
Olive Green 1612B27CAP 1912B27CAP Quartz 16RAL7039CAP 19RAL7039CAP
Juniper Green 1612B29CAP 1912B29CAP Hamlet 16RAL9002CAP 19RAL9002CAP
Sage 1612D45CAP 1912D45CAP White (Creamy) 16RAL9003CAP 19RAL9003CAP
Pinewood 1614C39CAP 1914C39CAP White Alum 16RAL9006CAP 19RAL9006CAP
Eau de Nil 1614E49CAP 1914E49CAP Pure White 16RAL9010CAP 19RAL9010CAP
Verona 1614E53CAP 1914E53CAP Metallic Silver 16S7500CAP 19S7500CAP
Albatross 1618B17CAP 1918B17CAP
EPDM WASHERS - Galv. Steel Aluminium

Metal Washer with Rubber (EPDM)
Product Washer Hole Washer Bag

Code (mm) (mm) Type Qty
Bags
EPDM washer used where parts come in contact WG16 16 6.8 Galv. Steel 100
with water. WG19 19 5.8 Galv. Steel 100
WA29 29 6.8 Aluminium 100
34
COVERS, WASHERS & FIXINGS METAL CONSTRUCTION SCREWS
COVERS, WASHERS & FIXINGS

For sealing roofing and cladding screws
Sela washers, Sela covers and Dowty type washers are a versatile product that are used to create a water tight
seal for use with screws, bolts and nails.
SELA COVER AND WASHER CORRUGATED SHEET FIXINGS

SC SW
Used when securing roofing sheets to create a

watertight seal. When using spring head roofing
nails just a washer is required as the head of the nail
will cover the entire washer to provide a watertight
seal. If using hook bolts you will also require a Sela Designed for fixing plastic corrugated sheets to
Cover to cover the washer and nut to complete the timber. The hinged cover cap provides a tight seal to
seal. prevent water ingress.
Product Size Bag Product Screw Size Bag

Colour
Code (mm) Qty Code (Imp.) Qty
Bags Bags
28SC 28 75 CSFC Clear 10 x 3 50
628SW M6 x 28 75 CSFB Black 10 x 3 50
828SW M8 x 28 75
DOWTY TYPE WASHER

Perfect for Spring Head Nails and Drive Screws
COLLATED
NAILS &
Used mainly with spring head roofing nails for
attaching corrugated roofing sheets to wooden
purlins. The washer provides a watertight seal when
FUEL CELLS
used correctly. DESIGNED FOR USE IN
Product Size Bag

CORDLESS GAS
Code (mm) Qty
& PNEUMATIC
Bags
6BPRS M6 75
NAILERS
8BPRS M8 75
See page 77
35
METAL CONSTRUCTION SCREWS METAL FRAMING SCREWS
METAL FRAMING SCREWS

For fixing steel to steel applications
Used for stitching metal or attaching to metal without the need to pre-drill a hole.
PAN HEAD - Exterior PAN HEAD - Zinc

Low Profile Standard Profile
Product Size MDT Box Product Size Size MDT Box

Code (Metric) (mm) Qty Code (Imperial) (Metric) (mm) Qty
Boxes Boxes
LPP16 4.8 x 16 3 500 00658PPSD 6 x 5⁄8 3.5 x 16 2.5 1,000
Boxes of 200’s 00061PPSD 6x1 3.5 x 25 2.5 1,000
16LP 4.8 x 16 3 200 07716PPSD 7 x 7⁄16 3.9 x 11 2.5 1,000
00812PPSD 8x½ 4.2 x 13 2.5 1,000
MDT = Maximum drill thickness.
00834PPSD 8x¾ 4.2 x 19 2.5 1,000
00081PPSD 8x1 4.2 x 25 2.5 1,000
Boxes of 200’s
WAFER HEAD - Exterior 812PSD 8x½ 4.2 x 13 2.5 200
Low Profile 834PSD 8x¾ 4.2 x 19 2.5 200
81PSD 8x1 4.2 x 25 2.5 200
Product Size MDT Box PAN HEAD - Zinc

Code (Metric) (mm) Qty Standard Profile
Boxes of 200’s
22LPW 4.8 x 22 3 200
Has serrations underneath the head.
PANCAKE HEAD - Exterior Product Size Size MDT Box

Low Profile Code (Imperial) (Metric) (mm) Qty
Boxes
00812SPSD 8x½ 4.2 x 13 2.5 1,000
Product Size MDT Box

Code (Metric) (mm) Qty
Boxes
FP19 5.5 x 19 5 500
FP26 5.5 x 26 5 500
Boxes of 200’s
19FP 5.5 x 19 5 200
36
SELF-TAPPING SCREWS METAL CONSTRUCTION SCREWS
SELF-TAPPING SCREWS
Available in: Zinc Black
Used for stitching metal or attaching to metal. A pre-drilled hole is required.
PAN HEAD - Zinc COUNTERSUNK - Zinc
Product Size Driver Product Size Driver

Qty Qty
Code (Imperial) Bit Size Code (Imperial) Bit Size
Boxes Boxes
00214CPAZ 2x¼ No.1 1,000 00438CCAZ 4 x 3⁄8 No.1 1,000
02516CPAZ 2 x 5⁄16 No.1 1,000 00612CCAZ 6x½ No.2 1,000
00438CPAZ 4 x 3⁄8 No.1 1,000 00658CCAZ 6 x 5⁄8 No.2 1,000
00412CPAZ 4x½ No.1 1,000 00634CCAZ 6x¾ No.2 1,000
00614CPAZ 6x¼ No.2 1,000 00061CCAZ 6x1 No.2 1,000
00638CPAZ 6 x 3⁄8 No.2 1,000 06114CCAZ 6 x 1¼ No.2 1,000
00612CPAZ 6x½ No.2 1,000 06112CCAZ 6 x 1½ No.2 1,000
00658CPAZ 6 x 5⁄8 No.2 1,000 00812CCAZ 8x½ No.2 1,000
00634CPAZ 6x¾ No.2 1,000 00858CCAZ 8 x 5⁄8 No.2 1,000
00061CPAZ 6x1 No.2 1,000 00834CCAZ 8x¾ No.2 1,000
00081CCAZ 8x1 No.2 1,000
00838CPAZ 8 x 3⁄8 No.2 1,000
08114CCAZ 8 x 1¼ No.2 1,000
00812CPAZ 8x½ No.2 1,000
08112CCAZ 8 x 1½ No.2 1,000
00858CPAZ 8 x 5⁄8 No.2 1,000
08134CCAZ 8 x 1¾ No.2 500
00834CPAZ 8x¾ No.2 1,000
00082CCAZ 8x2 No.2 500
00081CPAZ 8x1 No.2 1,000
01034CCAZ 10 x ¾ No.2 1,000
08114CPAZ 8 x 1¼ No.2 1,000
00101CCAZ 10 x 1 No.2 1,000
08112CPAZ 8 x 1½ No.2 1,000
10114CCAZ 10 x 1¼ No.2 1,000
00082CPAZ 8x2 No.2 500
10112CCAZ 10 x 1½ No.2 500
01012CPAZ 10 x ½ No.2 1,000 00102CCAZ 10 x 2 No.2 500
01058CPAZ 10 x 5⁄8 No.2 1,000 12112CCAZ 12 x 1½ No.3 500
01034CPAZ 10 x ¾ No.2 1,000
00101CPAZ 10 x 1 No.2 1,000
Packs
00634CCAZP 6x¾ No.2 25
10114CPAZ 10 x 1¼ No.2 1,000
00812CCAZP 8x½ No.2 22
10112CPAZ 10 x 1½ No.2 500
00834CCAZP 8x¾ No.2 20
00102CPAZ 10 x 2 No.2 500
00081CCAZP 8x1 No.2 18
01212CPAZ 12 x ½ No.3 500
08114CCAZP 8x1¼ No.2 16
00121CPAZ 12 x 1 No.3 1,000
08112CCAZP 8x1½ No.2 14
12112CPAZ 12 x 1½ No.3 500
10114CCAZP 10 x 1 ¼ No.2 10
01434CPAZ 14 x ¾ No.3 1,000
Packs
00614CPAZP 6x¼ No.2 30
00638CPAZP 6 x 3⁄8 No.2 25 FLANGE HEAD - Black
00612CPAZP 6x½ No.2 20
00634CPAZP 6x¾ No.2 18
00838CPAZP 8 x 3⁄8 No.2 16
00812CPAZP 8x½ No.2 16
00858CPAZP 8 x 5⁄8 No.2 14
00834CPAZP 8x¾ No.2 14 Product Size Driver
Qty
Code (Imperial) Bit Size
00081CPAZP 8x1 No.2 12
01012CPAZP 10 x ½ No.2 10 Boxes
01058CPAZP 10 x 5⁄8 No.2 10 00061CFAB 6x1 No.2 1,000
01034CPAZP 10 x ¾ No.2 10 00812CFAB 8x½ No.2 1,000
37
METAL CONSTRUCTION SCREWS SELF-TAPPING & MACHINE SCREWS
FLANGE HEAD - Zinc
Product Size Driver Product Size Driver

Qty Qty
Code (Imperial) Bit Size Code (Imperial) Bit Size
Boxes Packs
00612CFAZ 6x½ No.2 1,000 00838CFAZP 8 x 3⁄8 No.2 16
00634CFAZ 6x¾ No.2 1,000 00812CFAZP 8x½ No.2 16
00838CFAZ 8 x 3⁄8 No.2 1,000 00834CFAZP 8x¾ No.2 14
00812CFAZ 8x½ No.2 1,000 00081CFAZP 8x1 No.2 12
00858CFAZ 8 x 5⁄8 No.2 1,000
00834CFAZ 8x¾ No.2 1,000
00081CFAZ 8x1 No.2 1,000
08114CFAZ 8 x 1¼ No.2 1,000
01034CFAZ 10 x ¾ No.2 1,000
MACHINE SCREWS
Available in: Zinc
Machine screws available in various sizes for use with a metric internal thread.
COUNTERSUNK - Zinc PAN HEAD - Zinc

Qty Qty
Code (mm) Code (mm)
Boxes Boxes
4008CPM M4 x 8 100 4010PPM M4 x 10 100
4010CPM M4 x 10 100 4012PPM M4 x 12 100
4012CPM M4 x 12 100 4016PPM M4 x 16 100
4020CPM M4 x 20 100 4020PPM M4 x 20 100
4025CPM M4 x 25 100 4025PPM M4 x 25 100
4040CPM M4 x 40 100 4030PPM M4 x 30 100
5010CPM M5 x 10 100 4040PPM M4 x 40 100
5012CPM M5 x 12 100 4050PPM M4 x 50 100
5016CPM M5 x 16 100 5008PPM M5 x 8 100
5020CPM M5 x 20 100 5010PPM M5 x 10 100
5025CPM M5 x 25 100 5012PPM M5 x 12 100
5030CPM M5 x 30 100 5016PPM M5 x 16 100
5040CPM M5 x 40 100 5020PPM M5 x 20 100
5050cpm M5 x 50 100 5025PPM M5 x 25 100
6010CPM M6 x 10 100 5030PPM M5 x 30 100
6012CPM M6 x 12 100 5040PPM M5 x 40 100
6016CPM M6 x 16 100 5050PPM M5 x 50 100
6020CPM M6 x 20 100 6012PPM M6 x 12 100
6025CPM M6 x 25 100 6016PPM M6 x 16 100
6030CPM M6 x 30 100 6025PPM M6 x 25 100
6040CPM M6 x 40 100 6040PPM M6 x 40 100
6050CPM M6 x 50 100
38
WINDOW
FABRICATION
SCREWS
40 - FOR UNREINFORCED FRAMES
42 - MISCELLANEOUS SCREWS
43 - FOR REINFORCED FRAMES
WINDOW FABRICATION SCREWS FOR UNREINFORCED FRAMES
FOR UNREINFORCED FRAMES (HARDWARE)

Available in: Zinc (CR3) Yellow A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the
construction of PVCu windows\doors and for attaching hardware to the frames.
Also used to retain or attach to frames using modern day plastic reinforcement.
COUNTERSUNK HEAD WITH COUNTERSUNK HEAD,

RIBS, SINGLE THREAD, HI-LOW THREAD,
GIMLET TIP SLASH TIP
Zinc (CR3) Yellow A2/Aust. SS Zinc (CR3) Yellow
Multiple uses for fitting a variety of hardware to frames An alternative to the single thread range offering a
where there is no steel or aluminium reinforcement slash point and High/Low thread. Can also be used
present. The larger 4.8mm diameter items known as when ‘pinning’ PVC reinforcement. The larger 4.8mm
repair screws are frequently used in stripped holes. The diameter items known as repair screws are frequently
Stainless Steel option should be used where there is a used in stripped holes.
corrosive environment.
Product Size Box Product Size Box
Code (Metric) Qty Code (Metric) Qty
Zinc Zinc
201Z 4.3 x 16 1,000 104Z 4.3 x 25 1,000
202Z 4.3 x 20 1,000 105Z 4.3 x 30 1,000
204Z 4.3 x 25 1,000 106Z 4.3 x 40 1,000
205Z 4.3 x 30 1,000 109Z* 4.8 x 25 1,000
203Z 4.3 x 35 1,000 Yellow
206Z 4.3 x 40 1,000 104Y 4.3 x 25 1,000
207Z 4.3 x 45 500 105Y 4.3 x 30 1,000
208Z 4.3 x 55 500 106Y 4.3 x 40 1,000
209Z* 4.8 x 25 1,000 109Y* 4.8 x 25 1,000
210Z* 4.8 x 38 1,000
* REPAIR SCREWS FOR STRIPPED HOLES.
Yellow
201Y 4.3 x 16 1,000
202Y 4.3 x 20 1,000
204Y 4.3 x 25 1,000
205Y 4.3 x 30 1,000
203Y 4.3 x 35 1,000
206Y 4.3 x 40 1,000
207Y 4.3 x 45 500
208Y 4.3 x 55 500
209Y* 4.8 x 25 1,000
Stainless Steel
201SS 4.3 x 16 1,000
202SS 4.3 x 20 1,000
204SS 4.3 x 25 1,000
205SS 4.3 x 30 1,000
203SS 4.3 x 35 1,000
206SS 4.3 x 40 1,000
209SS* 4.8 x 25 1,000
* REPAIR SCREWS FOR STRIPPED HOLES.
40
FOR UNREINFORCED FRAMES WINDOW FABRICATION SCREWS
FOR UNREINFORCED FRAMES (FRICTION STAY)

Available in: Zinc (CR3) A2/Aust. SS
A comprehensive range of self piercing sharp point screws used for the
construction of a PVCu window\door to fix friction stay on to PVCu.
SHALLOW PAN WITH SHALLOW PAN

SERRATIONS, SINGLE COUNTERSUNK HEAD,
THREAD, GIMLET TIP SINGLE THREAD, GIMLET TIP
Zinc (CR3) A2/Aust. SS Zinc (CR3) A2/Aust. SS
For attaching friction stays to PVCu frames. The For attaching friction stays with countersunk holes to
Stainless Steel option should be used where there is a PVCu frames. The Stainless Steel option should be used
corrosive environment or an increased risk of corrosion. where there is a corrosive environment or an increased
risk of corrosion.
Zinc Zinc
215Z 4.8 x 16 1.000 213Z 4.3 x 16 1,000
216Z 4.8 x 20 1.000 211Z 4.3 x 20 1,000
217Z 4.8 x 25 1.000 212Z 4.3 x 25 1,000
218Z 4.8 x 30 1.000 Stainless Steel
Stainless Steel 213SS 4.3 x 16 1,000
215SS 4.8 x 16 1.000 211SS 4.3 x 20 1,000
216SS 4.8 x 20 1.000 212SS 4.3 x 25 1,000
217SS 4.8 x 25 1.000
218SS 4.8 x 30 1.000
SHALLOW PAN
COUNTERSUNK HEAD, HIGH-
LOW THREAD, SLASH TIP
Zinc (CR3)
For attaching friction stays to PVCu frames. An

alternative to the single thread range offering a slash
point and a High/Low thread to aid speed of insertion
and pull out, respectively.
Product Size Box

Code (Metric) Qty
Zinc
111Z 4.3 x 20 1,000
112Z 4.3 x 25 1,000
41
WINDOW FABRICATION SCREWS MISCELLANEOUS WINDOW SCREWS
ELEMENT SCREWS MACHINE SCREWS

Yellow Zinc (CR3)
Mechanical jointing screw with special truncated head A countersunk metric threaded machine screw used
for fixing either frame to frame or frame to mullions. for fastening handles or espagnolettes into predefined
The flat area underneath the head increases surface holes in frames. A heavier gauge screw for what is
area to improve clamping. normally a heavier duty requirement.

Yellow Zinc
191Y 4.8 x 55 200 520Z M5 x 20 500
192Y 4.8 x 65 200 530Z M5 x 30 500
193Y 4.8 x 80 200 540Z M5 x 40 500
194Y 4.8 x 95 200 545Z M5 x 45 500
550Z M5 x 50 500
REINFORCED FRAME SCREWS

Zinc (CR3) Martensitic SS
BAYPOLE SCREWS
Zinc (CR3)
Used for attaching steel hardware to steel reinforced

PVCu sections. The flat underside of the screws head
Specifically designed for the joining of PVCu bay
allows it to clamp the materials together firmly.
window sections but frequently used for other window
Product Size Box and door fabrication purposes.
Code (Metric) Qty
Product Size Box
Zinc Code (Metric) Qty
130Z 4.2 x 13 1,000
131Z 4.2 x 16 1,000
Zinc
132Z 4.2 x 19 1,000 289Z 4.8 x 40 200
133Z 4.2 x 25 1,000 290Z 4.8 x 50 200
291Z 4.8 x 60 200
Stainless Steel 292Z 4.8 x 70 200
130SS 4.2 x 13 1,000 293Z 4.8 x 80 200
131SS 4.2 x 16 1,000 294Z 4.8 x 90 200
132SS 4.2 x 19 1,000 295Z 4.8 x 100 200
133SS 4.2 x 25 1,000
WEATHER BAR SCREWS CILL SCREWS

Zinc (CR3) Zinc (CR3)
For use when attaching a weather bar or drip rail Used for attaching cills to the base of door or window
to PVCu window and door frames to prevent water frames. The self-drilling point permits the screw to drill
ingress. Large head provides easy and secure clipping. through both reinforced and unreinforced frames.
Zinc Zinc
241Z 4.2 x 13 1,000 225Z 4.2 x 50 500
226Z 4.2 x 55 500
227Z 4.2 x 65 200
42
FOR METAL REINFORCED FRAMES WINDOW FABRICATION SCREWS
FOR REINFORCED FRAMES (HARDWARE)

Available in: Zinc (CR3) Yellow Martensitic SS
A comprehensive range of self-drilling screws used for the construction of

a PVCu window/door and for attaching hardware where there is a metal
reinforcement.
COUNTERSUNK HEAD, COUNTERSUNK HEAD,

SELF-TAPPING THREAD, METRIC THREAD,
SELF-DRILLING POINT SELF-DRILLING POINT
Zinc (CR3) Yellow Martensitic SS Zinc (CR3) Yellow
Multiple uses for fitting a variety of hardware to frames An alternative to the self tapping thread version. This
where there is a steel or aluminium reinforcement metric threaded screw has multiple uses for fitting a
present. The smaller lengths with a ribbed countersunk variety of hardware to frames where there is a steel
head can also be used when pinning reinforcement. reinforcement present.
The Stainless Steel option should be used where there
is a corrosive environment.

Zinc Zinc
120Z# 3.9 x 13 1,000 150Z M4 x 16 1,000
121Z# 3.9 x 16 1,000 151Z M4 x 19 1,000
122Z# 3.9 x 19 1,000 153Z M4 x 25 1,000
123Z 3.9 x 25 1,000 154Z M4 x 32 1,000
126Z 3.6 x 29 1,000 155Z M4 x 38 500
124Z 3.9 x 32 1,000
125Z 3.9 x 38 1,000
Yellow
127Z 3.9 x 45 500 150Y M4 x 16 1,000
151Y M4 x 19 1,000
Yellow 153Y M4 x 25 1,000
120Y# 3.9 x 13 1,000 154Y M4 x 32 1,000
121Y# 3.9 x 16 1,000 155Y M4 x 38 500
122Y# 3.9 x 19 1,000
123Y 3.9 x 25 1,000
124Y 3.9 x 32 1,000
125Y 3.9 x 38 1,000
127Y 3.9 x 45 500
Stainless Steel
121SS# 3.9 x 16 1,000
122SS# 3.9 x 19 1,000
123SS 3.9 x 25 1,000
124SS 3.9 x 32 1,000
125SS 3.9 x 38 1,000
43
WINDOW FABRICATION SCREWS FOR METAL REINFORCED FRAMES
FOR REINFORCED FRAMES (HARDWARE)
COUNTERSUNK HEAD, COUNTERSUNK HEAD,

METRIC THREAD, SELF-TAPPING THREAD,
SELF-DRILLING POINT SELF-DRILLING POINT
Zinc (CR3) Martensitic SS Zinc (CR3)
Frequently used with auto feed machines when A heavier gauge screw, generally used where extra
‘pinning’ steel reinforcement inside PVCu frames. strength is required such as attaching hinges to a steel
reinforced frame. Countersunk head to suit the
Product Size Box
pre-defined holes in standard hinges.
Code (Metric) Qty
Zinc Product Size Box

230Z M4 x 13 1,000 Code (Metric) Qty
231Z M4 x 16 1,000
Zinc
232Z M4 x 19 1,000
423Z 4.8 x 25 1,000
Stainless Steel 425Z 4.8 x 38 500
231SS M4 x 16 1,000 427Z 4.8 x 45 500
FOR REINFORCED FRAMES (FRICTION STAY)

Available in: Zinc (CR3) Martensitic SS
A range of fasteners designed to fix friction stay on to PVCu with metal

re-enforcement.
SHALLOW PAN, SELF-TAPPING THREAD, SELF-DRILLING POINT

Zinc (CR3) Martensitic SS
Product Size Box

Code (Metric) Qty
Zinc
135Z 3.9 x 16 1,000
For attaching friction stays 136Z 3.9 x 19 1,000
with countersunk holes 137Z 3.9 x 25 1,000
to steel reinforced PVCu 138Z 3.9 x 29 1,000
141Z* 4.8 x 16 1,000
frames. The larger 4.8mm 142Z* 4.8 x 19 1,000
diameter items known as 143Z* 4.8 x 23 1,000
repair screws are frequently Stainless Steel
in stripped holes. The 135SS 3.9 x 16 1,000
Stainless Steel option should 136SS 3.9 x 19 1,000
be used where there is a 137SS 3.9 x 25 1,000
corrosive environment or an 138SS 3.9 x 29 1,000
increased risk of corrosion. 143SS* 4.8 x 23 1,000
* REPAIR SCREWS for stripped holes.
44
NUTS, BOLTS, SETS
AND WASHERS
46 - CARRIAGE BOLTS 49 - SETS
47 - ROOFING BOLTS 50 - NUTS
48 - CABLE TRAY BOLTS 51 - WASHERS
NUTS, BOLTS, SETS & WASHERS CARRIAGE BOLT & NUT
CARRIAGE BOLT & HEX NUT Materials

To BS
EN ISO
14592:2
008
A domed head bolt with a square anti spin shoulder

mainly used for clamping timber or attaching
ironmongery to timber.
Product Thread x Length Nut A/F Product Thread x Length Nut A/F
Qty Qty
10300CB M10 x 300 17 10

Boxes 1250CB M12 x 50 19 25
0620CB M6 x 20 10 200 1265CB M12 x 65 19 25
0625CB M6 x 25 10 200 1275CB M12 x 75 19 25
0630CB M6 x 30 10 200 1290CB M12 x 90 19 25
0640CB M6 x 40 10 200 12100CB M12 x 100 19 25
0650CB M6 x 50 10 200 12110CB M12 x 110 19 25
0660CB M6 x 60 10 100 12120CB M12 x 120 19 10
0665CB M6 x 65 10 100 12130CB M12 x 130 19 10
0670CB M6 x 70 10 100 12140CB M12 x 140 19 10
0675CB M6 x 75 10 100 12150CB M12 x 150 19 10
06100CB M6 x 100 10 100 12160CB M12 x 160 19 10
06130CB M6 x 130 10 50 12180CB M12 x 180 19 10
06150CB M6 x 150 10 50 12200CB M12 x 200 19 10
0820CB M8 x 20 13 200 12220CB M12 x 220 19 10
0825CB M8 x 25 13 100 12240CB M12 x 240 19 10
0830CB M8 x 30 13 100 12260CB M12 x 260 19 10
0835CB M8 x 35 13 100 12280CB M12 x 280 19 10
0840CB M8 x 40 13 100 12300CB M12 x 300 19 10
0845CB M8 x 45 13 100 16100CB M16 x 100 24 10
0850CB M8 x 50 13 100 16110CB M16 x 110 24 10
0860CB M8 x 60 13 100 16150CB M16 x 150 24 10
0865CB M8 x 65 13 50 16180CB M16 x 180 24 5
0870CB M8 x 70 13 50 16200CB M16 x 200 24 5
0875CB M8 x 75 13 50
0880CB M8 x 80 13 50 Bags
0890CB M8 x 90 13 50 08100CBB M8 x 100 13 40
08100CB M8 x 100 13 50 08110CBB M8 x 110 13 35
08110CB M8 x 110 13 50 08130CBB M8 x 130 13 30
08120CB M8 x 120 13 50 08150CBB M8 x 150 13 24
08130CB M8 x 130 13 50 1075CBB M10 x 75 17 28
08150CB M8 x 150 13 25 10100CBB M10 x 100 17 24
08180CB M8 x 180 13 25 10120CBB M10 x 120 17 20
08200CB M8 x 200 13 25 10130CBB M10 x 130 17 20
1025CB M10 x 25 17 100 10150CBB M10 x 150 17 14
1030CB M10 x 30 17 100 10180CBB M10 x 180 17 12
1035CB M10 x 35 17 50 10200CBB M10 x 200 17 10
1040CB M10 x 40 17 50 12100CBB M12 x 100 19 14
1050CB M10 x 50 17 50 12130CBB M12 x 130 19 12
1065CB M10 x 65 17 50 12150CBB M12 x 150 19 10
1070CB M10 x 70 17 50 12200CBB M12 x 200 19 5
1075CB M10 x 75 17 50
1080CB M10 x 80 17 50
Packs
1090CB M10 x 90 17 25 08100CBP M8 x 100 13 4
10100CB M10 x 100 17 25 08110CBP M8 x 110 13 3
10110CB M10 x 110 17 25 08130CBP M8 x 130 13 3
10120CB M10 x 120 17 25 08150CBP M8 x 150 13 2
10130CB M10 x 130 17 25 1075CBP M10 x 75 17 3
10140CB M10 x 140 17 25 10100CBP M10 x 100 17 2
10150CB M10 x 150 17 25
10120CBP M10 x 120 17 2
10160CB M10 x 160 17 25
10180CB M10 x 180 17 25 10130CBP M10 x 130 17 2
10200CB M10 x 200 17 10 10150CBP M10 x 150 17 2
10220CB M10 x 220 17 10 10180CBP M10 x 180 17 2
10240CB M10 x 240 17 10 12100CBP M12 x 100 19 2
10260CB M10 x 260 17 10 12130CBP M12 x 130 19 2
10280CB M10 x 280 17 10
46
CARRIAGE / ROOFING BOLTS & NUT NUTS, BOLTS, SETS & WASHERS
EXTERIOR CARRIAGE BOLTS

Exterior bolt & nut
To BS
EN ISO
14592:2
008
Product Size
A/F Qty
Code (Metric)
Bags
10100INCB 10 x 100 17 10
10150INCB 10 x 150 17 10
A domed head bolt with a square anti spin shoulder 10160INCB 10 x 160 17 10
mainly used for clamping timber or attaching 10200INCB 10 x 200 17 10
ironmongery to timber. 10220INCB 10 x 220 17 10
ROOFING BOLT & NUT Materials
Manufactured with a large flat head, making it ideal

for clamping thin sheet metal, plastic and wood
Product Thread x Length Nut Product Thread x Length Nut

Qty Qty
Boxes Bags
0512RB M5 x 12 M5 200 0612RBB M6 x 12 M6 150
0530RB M5 x 30 M5 200 0620RBB M6 x 20 M6 140
0608RB M6 x 08 M6 200 0625RBB M6 x 25 M6 130
0612RB M6 x 12 M6 200 0630RBB M6 x 30 M6 120
0616RB M6 x 16 M6 200 0640RBB M6 x 40 M6 110
0620RB M6 x 20 M6 200 0650RBB M6 x 50 M6 90
0625RB M6 x 25 M6 100 0660RBB M6 x 60 M6 80
0630RB M6 x 30 M6 100 0680RBB M6 x 80 M6 70
0635RB M6 x 35 M6 100 Packs
0640RB M6 x 40 M6 100 0612RBP M6 x 12 M6 14
0650RB M6 x 50 M6 100 0620RBP M6 x 20 M6 12
0660RB M6 x 60 M6 100 0625RBP M6 x 25 M6 10
0670RB M6 x 70 M6 100 0630RBP M6 x 30 M6 10
0680RB M6 x 80 M6 100 0640RBP M6 x 40 M6 8
06100RB M6 x 100 M6 100 0650RBP M6 x 50 M6 8
0825RB M8 x 25 M8 100 0660RBP M6 x 60 M6 6
0830RB M8 x 30 M8 100 0680RBP M6 x 80 M6 4
0840RB M8 x 40 M8 100
0850RB M8 x 50 M8 100
0860RB M8 x 60 M8 100
0880RB M8 x 80 M8 50
08100RB M8 x 100 M8 50
08120RB M8 x 120 M8 50
08140RB M8 x 140 M8 50
08160RB M8 x 160 M8 50
08180RB M8 x 180 M8 50
08200RB M8 x 200 M8 50
47
NUTS, BOLTS, SETS & WASHERS CABLE TRAY BOLT / HEX NUTS & SETS
CABLE TRAY BOLTS & HEX NUT Materials
Specifically designed to provide a rapid and secure

fixing when erecting cable trays. The combi recess or
hex flange nut can be used with a power tool.
Product Thread x Length Nut

Qty
Code (mm) (mm)
Boxes
CTB612 M6 x 12 M6 200
CTB616 M6 x 16 M6 200
CTB620 M6 x 20 M6 200
CTB625 M6 x 25 M6 200
SETS & HEX NUTS


Qty Qty
Bags Packs
616SNZB M6 x 16 10 130 616SNZP M6 x 16 10 8
620SNZB M6 x 20 10 115 620SNZP M6 x 20 10 8
625SNZB M6 x 25 10 100 625SNZP M6 x 25 10 6
650SNZB M6 x 50 10 70 650SNZP M6 x 50 10 4
820SNZB M8 x 20 13 60 820SNZP M8 x 20 13 6
825SNZB M8 x 25 13 55 825SNZP M8 x 25 13 4
840SNZB M8 x 40 13 45 840SNZP M8 x 40 13 2
850SNZB M8 x 50 13 40 850SNZP M8 x 50 13 2
870SNZB M8 x 70 13 30 870SNZP M8 x 70 13 2
1025SNZB M10 x 25 17 35 1025SNZP M10 x 25 17 2
1030SNZB M10 x 30 17 32 1030SNZP M10 x 30 17 2
1040SNZB M10 x 40 17 28 1040SNZP M10 x 40 17 2
1050SNZB M10 x 50 17 25 1050SNZP M10 x 50 17 2
1070SNZB M10 x 70 17 20 1070SNZP M10 x 70 17 2
10100SNZB M10 x 100 17 16 10100SNZP M10 x 100 17 16
1225SNZB M12 x 25 19 25 1225SNZP M12 x 25 19 25
1230SNZB M12 x 30 19 23 1230SNZP M12 x 30 19 23
1235SNZB M12 x 35 19 22 1235SNZP M12 x 35 19 22
1240SNZB M12 x 40 19 20 1240SNZP M12 x 40 19 20
1250SNZB M12 x 50 19 18 1250SNZP M12 x 50 19 18
1270SNZB M12 x 70 19 14 1270SNZP M12 x 70 19 14
12100SNZB M12 x 100 19 10 12100SNZP M12 x 100 19 10
48
SETS NUTS, BOLTS, SETS & WASHERS
SETS (DIN 933)

A fully threaded high tensile bolt used in a wide

variety of applications.

Qty Qty
Boxes Boxes
S612Z M6 x 12 10 500 S1240Z M12 x 40 19 100
S616Z M6 x 16 10 500 S1245Z M12 x 45 19 100
S620Z M6 x 20 10 500 S1250Z M12 x 50 19 100
S625Z M6 x 25 10 500 S1260Z M12 x 60 19 100
S630Z M6 x 30 10 500 S1270Z M12 x 70 19 50
S635Z M6 x 35 10 500 S1275Z M12 x 75 19 50
S640Z M6 x 40 10 200 S1280Z M12 x 80 19 50
S650Z M6 x 50 10 200 S12100Z M12 x 100 19 50
S816Z M8 x 16 13 200 S12120Z M12 x 120 19 50
S820Z M8 x 20 13 200 S1625Z M16 x 25 24 50
S825Z M8 x 25 13 200 S1630Z M16 x 30 24 50
S830Z M8 x 30 13 200 S1635Z M16 x 35 24 50
S835Z M8 x 35 13 200 S1640Z M16 x 40 24 50
S840Z M8 x 40 13 200 S1645Z M16 x 45 24 50
S850Z M8 x 50 13 200 S1650Z M16 x 50 24 50
S860Z M8 x 60 13 200 S1655Z M16 x 55 24 50
S870Z M8 x 70 13 200 S1660Z M16 x 60 24 50
S880Z M8 x 80 13 200 S1665Z M16 x 65 24 25
S8100Z M8 x 100 13 100 S1670Z M16 x 70 24 25
S1020Z M10 x 20 17 200 S1675Z M16 x 75 24 25
S1025Z M10 x 25 17 200 S1680Z M16 x 80 24 25
S1030Z M10 x 30 17 200 S16100Z M16 x 100 24 25
S1035Z M10 x 35 17 100 S2040Z M20 x 40 30 25
S1040Z M10 x 40 17 100 S2045Z M20 x 45 30 25
S1050Z M10 x 50 17 100 S2050Z M20 x 50 30 25
S1060Z M10 x 60 17 100 S2055Z M20 x 55 30 25
S1070Z M10 x 70 17 100 S2060Z M20 x 60 30 25
S1075Z M10 x 75 17 100 S2065Z M20 x 65 30 25
S1080Z M10 x 80 17 100 S2070Z M20 x 70 30 25
S10100Z M10 x 100 17 50 S2075Z M20 x 75 30 25
S1225Z M12 x 25 19 100 S2080Z M20 x 80 30 25
S1230Z M12 x 30 19 100 S2090Z M20 x 90 30 20
S1235Z M12 x 35 19 100 S20100Z M20 x 100 30 20
49
NUTS, BOLTS, SETS & WASHERS NUTS
NUTS NYLON INSERT NUTS (TYPE P)

Available in: Zinc (CR3) Also known as locking nuts designed
to prevent the nut from loosening.
A range of metric threaded zinc nuts, includes the
most popular types.
Product Size Height A/F
Qty
Code (mm) (mm) (mm)
HEX FULL NUTS Boxes

NP6Z M6 8 10 500
A traditional nut used for all bolting NP8Z M8 9.5 13 200
and fastening applications. NP10Z M10 11.5 17 100
NP12Z M12 14 19 100
NP16Z M16 18 24 100
Size Height A/F

Bags
Product
Qty 6NPB M6 8 10 300
Code (mm) (mm) (mm)
8NPB M8 9.5 13 300
Boxes 10NPB M10 11.5 17 130
NH4Z M4 3.2 7 1,500 12NPB M12 14 19 90
NH5Z M5 4 8 1,000 16NPB M16 18 24 45
NH6Z M6 5 10 500 Packs
NH8Z M8 6.5 13 200 6NPP M6 8 10 20
NH10Z M10 8 17 100 8NPP M8 9.5 13 10
NH12Z M12 10 19 100 10NPP M10 11.5 17 4
NH16Z M16 13 24 100 12NPP M12 14 19 4
NH20Z M20 16 30 50 16NPP M16 18 24 2
Bags
6HNUTZB M6 5 10 600
8HNUTZB M8 6.5 13 300 NYLON INSERT NUTS (TYPE T)
10HNUTZB M10 8 17 130
12HNUTZB M12 10 19 90 An economic nut thinner than
16HNUTZB M16 13 24 45 Type P, designed to prevent the nut
20HNUTZB M20 16 30 20 from loosening.
Packs
6HNUTZP M6 5 10 40 Product Size Height A/F
Qty
8HNUTZP M8 6.5 13 30 Code (mm) (mm) (mm)
10HNUTZP M10 8 17 20
12HNUTZP M12 10 19 10
Boxes
NT6Z M6 6 10 500
16HNUTZP M16 13 24 4
NT8Z M8 8 13 200
20HNUTZP M20 16 30 2
NT10Z M10 10 17 100
NT12Z M12 12 19 100
NT16Z M16 16 24 100
HEX SERRATED FLANGE NUTS

HEX CONNECTOR NUT
Designed to provide a larger
clamping and locking force than a For extending the length of
standard hex nut. threaded bar.
Product Size Height A/F Product Size Height A/F

Qty Qty
Code (mm) (mm) (mm) Code (mm) (mm) (mm)
Boxes Boxes
NF6Z M6 6 10 300 NC6Z M6 18 10 200
NF8Z M8 8 13 200 NC8Z M8 24 13 100
NF10Z M10 10 17 100 NC10Z M10 30 17 100
NF12Z M12 12 19 100 NC12Z M12 36 19 100
NF16Z M16 16 24 100 NC16Z M16 48 24 50
NC20Z M20 60 30 25
NF20Z M20 20 30 50
50
NUTS & WASHERS NUTS, BOLTS, SETS & WASHERS
WING NUT HEX DOME NUT

A light duty nut used to be Ideal for protective or aesthetic uses.
fastened by hand where the nut is
regularly removed.
Product Size Height A/F Product Size Height A/F

Qty Qty
Code (mm) (mm) (mm) Code (mm) (mm) (mm)
Boxes Boxes
NW6Z M6 N/A N/A 300 ND6Z M6 12 10 200
NW8Z M8 N/A N/A 200 ND8Z M8 15 13 100
NW10Z M10 N/A N/A 100 ND10Z M10 18 17 100
NW12Z M12 N/A N/A 100 ND12Z M12 22 19 100
NW16Z M16 N/A N/A 100 ND16Z M16 28 24 100
ND20Z M20 34 30 50
WASHERS
A variety of zinc plated washers to suit multiple FORM B WASHER

applications.
An economic washer thinner
than a Form A, used for clamping
FORM A WASHER and spacing applications.
A traditional and commonly used

washer for clamping and spacing Product Size Outer Thickness
Qty
applications. Code (mm) (mm) (mm)
Boxes
Product Size Outer Thickness
Qty WB6Z M6 12 0.8 500
Code (mm) (mm) (mm)
WB8Z M8 17 1 200
Boxes WB10Z M10 21 1.25 100
WA4Z M4 9 0.8 1,250 WB12Z M12 24 1.6 100
WA5Z M5 10 1 1,000 WB16Z M16 30 2 100
WA6Z M6 12.5 1.6 500 WB20Z M20 27 2 100
WA8Z M8 17 1.6 200
WA10Z M10 21 2 100
WA12Z M12 24 2.5 100
WA14Z M14 24 2.5 100
WA16Z M16 30 3 100 FORM C WASHER
WA20Z M20 37 3 100
WA24Z M24 44 4 100 A wider diameter washer than the
Bags Form A & B used to increase the
6WHAZB M6 12.5 1.6 500 clamping area.
8WHAZB M8 17 1.6 350
10WHAZB M10 21 2 200
12WHAZB M12 24 2.5 130 Product Size Outer Thickness
Qty
16WHAZB M16 30 3 75 Code (mm) (mm) (mm)
20WHAZB M20 37 3 50
Packs Boxes
WC6Z M6 14 1.6 500
6WHAZP M6 12.5 1.6 60
WC8Z M8 21 1.6 200
8WHAZP M8 17 1.6 30
10WHAZP M10 21 2 20 WC10Z M10 24 2 100
12WHAZP M12 24 2.5 15 WC12Z M12 28 2.5 100
16WHAZP M16 30 3 8 WC16Z M16 34 3 100
20WHAZP M20 37 3 4 WC20Z M20 39 4 100
51
NUTS, BOLTS, SETS & WASHERS WASHERS
SPRING WASHER PENNY/REPAIR WASHER

Designed to prevent the nut from A large diameter washer ideal
loosening. for spreading the clamping
load, reducing a hole
diameter and packing out.
Product Size Hole x L x W x D

Qty
Code (mm)
Product Size Outer Thickness
Boxes Qty
Code (mm) (mm) (mm)
WSP6Z M6 x 9.9 x 3.2 x 1.6 500
WSP8Z M8 x 12.7 x 4 x 2 250
Boxes
WSP10Z M10 x 16 x 5 x 2.5 200 WP525Z M5 25 1.5 100
WSP12Z M12 x 18 x 5 x 2.5 200 WP620Z M6 20 1.5 100
WSP16Z M16 x 24.4 x 7 x 3.5 100 WP625Z M6 25 1.5 100

WP630Z M6 30 1.5 100
WP640Z M6 40 1.5 100
WP825Z M8 25 1.5 100
WP830Z M8 30 1.5 100
WP840Z M8 40 1.5 100
SQUARE PLATE WASHER WP1025Z M10 25 1.5 100
WP1030Z M10 30 1.5 100
Designed to provide WP1040Z M10 40 1.5 100
a large clamping WP1240Z M12 40 1.5 100
surface and therefore Bags
spreading the load of 625WHPZB M6 25 1.5 160
a fastening.
825WHPZB M8 25 1.5 160
1040WHPZB M10 40 1.5 60
WP1240Z M12 40 1.5 50
Product Size Hole x L x W x D
Qty Packs
Code (mm)
625WHPZP M6 25 1.5 10
Boxes 640WHPZP M6 40 1.5 4
WS8405Z M8 x 40 x 40 x 5 100 825WHPZP M8 25 1.5 8
WS10403Z M10 x 40 x 40 x 3 100 840WHPZP M8 40 1.5 4
WS10405Z M10 x 40 x 40 x 5 100 1040WHPZP M10 40 1.5 4
WS10503Z M10 x 50 x 50 x 3 100
WS12503Z M12 x 50 x 50 x 3 100
WS16503Z M16 x 50 x 50 x 3 100
Bags
1050WHSPZB M10 x 50 x 50 x 3 30
1250WHSPZB M12 x 50 x 50 x 3 30
Packs
1050WHSPZP M10 x 50 x 50 x 3 2
1250WHSPZP M12 x 50 x 50 x 3 2
52
52
FIXINGS AND
FASTENERS
54 - CABLE TIES 56 - SANITARY FIXINGS
55 - HOOKS AND EYES 58 - PIPE CLIPS
FIXINGS & FASTENERS CABLE TIES
CABLE TIES
Available in: Nylon
An economic and convenient solution designed to

bundle and secure wires, cables, hoses and more.
Available in multiple colours. Manufactured from
nylon with operational temperature range of -40°c
to 85°c.
NATURAL CABLE TIES BLACK CABLE TIES
Product Size Tensile Product Size Tensile

Qty Qty
Code (mm) Strength Code (mm) Strength
Bags Bags
25100CTN 2.5 x 100 8.10 100 25100CTB 2.5 x 100 8.10 100
36140CTN 3.6 x 140 18.20 100 36140CTB 3.6 x 140 18.20 100
36200CTN 3.6 x 200 18.20 100 36200CTB 3.6 x 200 18.20 100
45180CTN 4.5 x 180 22.20 100 45180CTN 4.5 x 180 22.20 100
45200CTN 4.5 x 200 22.20 100 45200CTN 4.5 x 200 22.20 100
45300CTN 4.5 x 300 22.20 100 45300CTN 4.5 x 300 22.20 100
48160CTN 4.8 x 160 22.20 100 48160CTB 4.8 x 160 22.20 100
48200CTN 4.8 x 200 22.20 100 48200CTB 4.8 x 200 22.20 100
48250CTN 4.8 x 250 22.20 100 48250CTB 4.8 x 250 22.20 100
48300CTN 4.8 x 300 22.20 100 48300CTB 4.8 x 300 22.20 100
48370CTN 4.8 x 370 22.20 100 48370CTB 4.8 x 370 22.20 100
48430CTN 4.8 x 430 22.20 100 48430CTB 4.8 x 430 22.20 100
76250CTN 7.6 X 250 54.40 100 76250CTB 7.6 X 250 54.40 100
76300CTN 7.6 x 300 54.40 100 76300CTB 7.6 x 300 54.40 100
76370CTN 7.6 x 370 54.40 100 76370CTB 7.6 x 370 54.40 100
76540CTN 7.6 x 540 54.40 100 76540CTB 7.6 x 540 54.40 100
90530CTN 9.0 x 530 79.40 100 90530CTB 9.0 x 530 79.40 100
COLOURED CABLE TIES* CABLE TIE PLUGS
A simple solution for attaching a cable tie to

Product Tensile
Size Qty masonry or timber.
Code Strength
Bags Product Size Drill Hole

Qty
48200CTMIX 2.5 x 100 22.20 200 Code (mm) Size (mm)
* 50 of each colour (Yellow, Green, Red & Blue)
Bags
840CTP 8 x 40 8 100
54
HOOKS & EYES FIXINGS & FASTENERS
HOOKS & EYES
PICTURE HOOK SET SCREW HOOKS - Zinc
For hanging pictures. A medium duty versatile solution for either hanging
or attaching items to timber or masonry with the
Product
Part Qty use of a plug.
Code
Packs Product Size

Qty
Code (mm)
35BWP Wire (Ø 0.92mm x 3.5m) 1
2PHSP No.2 Single Hook 12 Packs
3PHDP No.3 Double Hook 4 60SHP 60 4
MPHP No.2 & No.3 Mixed Hooks 8 80SHP 80 3
100SHP 100 2
ROUND CUP HOOKS

SCREW EYES - Zinc
A light duty horizontal or vertical hook to be used

into wood for hanging small items such as keys. A medium duty versatile solution for either hanging
Available in a brass or white finish. or attaching items to timber or masonry with the
use of a plug.
Product Size
Colour Qty Product Size
Code (mm) Qty
Code (mm)
Packs
19SHBP 19 Brass 15
Packs
25SHBP 25 Brass 10 30SEP 30 15
25SHWP 25 White 6 40SEP 40 10
38SHBP 38 Brass 5 45SEP 45 5
38SHWP 38 White 4 55SEP 55 4
VINE EYES - Zinc

SQUARE CUP HOOKS
There are multiple uses but commonly used to

A light duty horizontal hook to be used into wood thread string or wire to train plants up fences or
for hanging small items. walls with the use of a plug.

Qty Qty
Code (mm) Code (mm)
Packs Packs
25SQBP 25 16 75VEP 4.3 x 75 4
38SQBP 38 8 100VEP 4.3 x 100 2
55
FIXINGS & FASTENERS SANITARY FIXINGS
Materials
SANITARY FIXINGS
For fixing bathroom fixtures
Complete fixing kits for quick and easy installation of sanitary ware including wash basins, toilets and bidets.
Suitable for use with a variety of solid building materials including concrete, natural stone, brick and timber.
BASIN FIXING KITS PAN/BIDET FIXING KITS
Installation Guide Installation Guide
Designed to securely mount washbasins to a variety Designed for floor fixing pan/bidets into a variety of
of solid building materials. Countersunk nylon solid building materials. Countersunk nylon bushes
bushes designed to ensure no damage is done to designed to ensure no damage is done to the fixture
the basin during installation. *Can also be used into during installation. Flat caps for a concealed finish.
wood without nylon plugs. *Can also be used into wood without nylon plugs.
LIGHT DUTY
Product Size Item Product Size Item
Description Description
Code (mm) Qty Code (mm) Qty
Bags Bags
Nylon Plugs 10 2 Nylon Plug 10 2
Stud Screws M8 x 100 2 Hex Slotted Coach Screws 6 x 80 2
PBK
LDBK Nylon Bushes M8 2 Nylon Bushes 6 2
Washers M8 2 White Flat Caps 18 2
Hex Full Nuts M8 2
HEAVY DUTY
Product Size Item
Description
Code (mm) Qty
Bags
Nylon Plugs 14 2
Stud Screws M10 x 140 2
HDBK Nylon Bushes M10 2
Washers M10 2
Hex Full Nuts M10 2
56
SANITARY FIXINGS FIXINGS & FASTENERS
CLOAKROOM BASIN FIXING KITS ADJUSTABLE WC FIXING KITS
Designed to fix cloakroom basins to a variety of solid Designed to fix WC pan/bidets to a variety of solid
building materials. *Can also be used into wood building materials. Fully adjustable for a quick easy
without nylon plugs. installation. Countersunk nylon bushes designed
to ensure no damage is done to the fixture during
installation. *Can also be used into wood without
nylon plugs.
Product Size Item Product Size Item

Description Description
Code (mm) Qty Code (mm) Qty
Bags Bags
Basin Brackets - 2 Nylon Support Bracket - 2
Nylon Plugs 10 2 Nylon Plug 10 2
CBK
Washers 7 2 Hex Slotted Coach Screws 6 x 70 2
WCBK
Hex Head Coach Screws 7 x 60 2 Nylon Bushes 5 2
Washers 6 2
Screws 4.5 x 40 2
Chrome Cover Caps 18 2
57
FIXINGS & FASTENERS PIPE CLIPS
PIPE CLIPS
Designed and manufactured to accommodate today’s standard pipe sizes. Manufactured in the UK using a high
quality polypropylene to prevent snapping and to give a secure fixing.
SINGLE QUICK LOCK PIPE CLIP QUICK LOCK SPACER

A robust range of clips The Quick Lock spacer is
designed to withstand designed to suit all single
repeated opening and clips to allow a greater
closing offering 360° degree stand-off where site
pipe retention. The clips conditions apply or where
provide a very secure grip thicker lagging is used.
when the pipe is in place
and the snap tight locking
top offers complete security Product Screw Size Screw Size Size
Qty
of the pipe. The high stand- Code (mm) (Imp.) (mm)
off allows for lagging and
heat circulation. Bags
QSP1 3.5 - 4.5 6, 7, 8 13 50
Product Screw Size Screw Size Size

Qty
Code (mm) (Imp.) (mm)
Bags SINGLE OPEN PIPE CLIP

QS15 3.5 - 4.5 6, 7, 8 15 50
QS22 3.5 - 4.5 6, 7, 8 22 50 The single open clip
QS28 3.5 - 4.5 6, 7, 8 28 50 provides a strong and
reliable snap fit pipe fixing,
installed using either No.8
or No.10 woodscrews.
NAIL IN PIPE CLIP

Zinc plated hardened and Product Screw Size Screw Size Size
Qty
tempered nail suitable for Code (mm) (Imp.) (mm)
all types of masonry. Bags
OPS15 3.5 - 4.5 6, 7, 8 15 50
OPS22 3.5 - 4.5 6, 7, 8 22 50
OP28 3.5 - 4.5 6, 7, 8 28 50
Product Size
Qty
Code (mm)
Bags SINGLE HINGED PIPE CLIP

NCW10 10 50
NCW15 15 50 The single hinged clip is
NCW22 22 50 available in sizes to fit MDPE
pipe, in blue to match the
pipe colour.
Screw
Product Screw Size Size To Fit
Size Qty
Code (Imp.) (mm) (mm)
(mm)
Bags
TMS20 3.5 - 4.5 6, 7, 8 20 19 - 21 10
TMS25 3.5 - 4.5 6, 7, 8 25 25 - 27.4 10
TMS35 3.5 - 4.5 6, 7, 8, 10 35 31.8 - 35 10
58
PLASTERBOARD
FIXINGS
60 - SPEED PLUGS 61 - METAL CAVITY ANCHORS
60 - SPRING TOGGLES 61 - HAMMER-IN FIXINGS
PLASTERBOARD FIXINGS SPEED PLUGS & SPRING TOGGLES
SPEED PLUGS Materials
Light duty applications into plasterboard.
Installation Guide
A rapid light duty plasterboard fixing for use in a

wide range of applications. Cross-recess head, allows
simple installation with a screw driver. Metal plugs
comes complete with screws.
METAL SPEED PLUGS NYLON SPEED PLUGS

With screws Ideal for electrical installations
Product Plug Length Screw MFT Product Plug Length

Qty Qty
Code (mm) Ø x L (mm) (mm) Code (mm)
Tubs Boxes
TBAZST 31.5 4.5 x 30 6 300 TBAN* 42 100
Boxes *6mm pre-drilled hole may be required in harder plasterboards.
TBAZS 31.5 4.5 x 30 6 100
Bags
TBAZSB 31.5 4.5 x 30 6 75
Packs
TBAZSP 31.5 4.5 x 30 6 5
MFT = Max Fixture Thickness
SPRING TOGGLES Materials
Ideal for ceiling installations
Installation Guide
A cavity fixing that is ideal for overhead installations.
The wings spread the load over a wider area making
them more suited for heavier loads.
Product Thread Drill Screw

WFT Qty
Code Ø Hole Ø Length
Boxes
TOG350 M3 11 50 30 100
TOG550 M5 14 50 20 100
TOG575 M5 14 75 45 100
TOG5100 M5 14 100 70 100
TOG675 M6 18 75 45 100
Bags
TOG550B M5 14 50 20 55
TOG575B M5 14 75 45 50
WFT = Wall and Fixture Thickness
60
CAVITY ANCHOR & HAMMER-IN FIXINGS PLASTERBOARD FIXINGS
METAL CAVITY ANCHORS Materials
For a secure fixing into plasterboard
Installation Guide
A cavity fixing that is ideal for hanging radiators,
brackets, hand rails and shelving units. When
installing multiple anchors a setting tool is
recommended.
Product Screw Drill FCH Grip

Qty
Code ØxL Hole Ø Ø Board
Boxes
40038CA M4 x 45 8 4 8-16 100
SETTING TOOL
40045CA M4 x 50 8 4 16-23 100
A handy and efficient
40060CA M4 x 65 8 4 31-38 100
tool used to set cavity
50037CA M5 x 45 10 5 6-13 100
anchors.
50052CA M5 x 60 10 5 7-16 100
50065CA M5 x 70 10 5 17-32 100
60052CA M6 x 60 12 6 7-16 100
60065CA M6 x 70 12 6 17-32 100
Bags
50037CAB M5 x 45 10 5 6-13 70
50052CAB M5 x 60 10 5 7-16 60
60065CAB M6 x 70 12 6 17-32 40
Packs Setting Tool
50037CAP M5 x 45 10 5 6-13 4 SETOOL 1
50052CAP M5 x 60 10 5 7-16 3
FCH = Fixture Clearance Hole
HAMMER-IN FIXINGS Materials
Light duty fixtures into plasterboard
Installation Guide A rapid light duty plasterboard fixing for use in a

wide range of applications. Serrated point for easy
hammering and quick installation. Supplied with
screws.
Product Screw MFT

Qty
Code ØxL (mm)
Boxes
HPF30 4 x 30 6 100
61
CONCRETE AND
MASONRY ANCHORS
63 - PLASTIC PLUGS 66 - NYLON FIXINGS 71 - EYES & HOOKS
63 - EXPRESS NAILS 67 - MULTI-FIX SCREWS 72 - THREADED BAR
64 - CEILING ANCHORS 68 - MULTI-FIX BOLTS 72 - CHEMICAL STUDS
64 - NAIL IN ANCHORS 69 - THROUGHBOLTS 73 - MULTI-FIX RESIN
64 - WIRE HANGER ANCHORS 69 - DROP IN ANCHORS 74 - GUNS
65 - INSULATION FIXINGS 70 - SHIELD ANCHORS 75 - RESIN ACCESSORIES
PLASTIC PLUGS & EXPRESS NAILS CONCRETE & MASONRY ANCHORS
PLASTIC PLUGS EXPRESS NAILS

All-purpose, cost effective fixing Light duty general purpose anchor
Materials
Materials
An underestimated rapid hammer-set anchor for
concrete and masonry, ideal for interior timber-work
such as battens and frames.
Suitable for all kinds of concrete and masonry Installation Guide

substrate materials. Ideal for medium and
lightweight applications. It may be beneficial
to reduce drill diameter in soft materials.
Installation Guide
Product Drill FCH

ØxL MFT Qty
Code Hole Ø Ø
Boxes
00650EN 6 x 50 6 20 7 200
00660EN 6 x 60 6 30 7 100
Product Length Screw Screw
Colour Qty 00680EN 6 x 80 6 50 7 100
Code (mm) Ø (Imp.) Ø (mm)
00870EN 8 x 70 8 30 9 100
Boxes 00890EN 8 x 90 8 50 9 50
YPLUG Yellow 25 4-8 3.0 - 4.5 100 08110EN 8 x 110 8 70 9 50
RPLUG Red 30 6 - 10 3.5 - 5.0 100 08130EN 8 x 130 8 90 9 50
BPLUG Brown 36 8 - 12 4.5 - 6.0 100 08150EN 8 x 150 8 110 9 50
BLPLUG Blue 48 12 - 15 6.0 - 8.0 40 08180EN 8 x 180 8 140 9 50
Bags
00660ENB 6 x 60 6 30 7 90
00680ENB 6 x 80 6 50 7 70
00890ENB 8 x 90 8 50 9 40
FOR 08110ENB 8 x 110

08150ENB 8 x 150
8
8
70
110
9
9
35
30
NYLON
PLUGS
SEE PAGE
24
63
CONCRETE & MASONRY ANCHORS CEILING, NAIL IN & WIRE HANGER ANCHORS
CEILING ANCHORS Materials
Ideal for brackets on suspended ceilings
A rapid light duty hammer-set anchor for attaching

sheet metal, plastic or wood to concrete or masonry.
Made from steel making it ideal for overhead
applications.
Installation Guide Product Drill FCH

ØxL MFT Qty
Code Hole Ø Ø
Boxes
0640CAM 6 x 40 6 5 6.5 100
0665CAM 6 x 65 6 30 6.5 100
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
NAIL IN ANCHORS Materials
Light duty general purpose anchor
A rapid light duty hammer-set anchor for attaching

sheet metal, plastic or wood to concrete or masonry.
Note: Not suitable for overhead applications.
Installation Guide Product Drill FCH

ØxL MFT Qty
Code Hole Ø Ø
Boxes
0630ZNA 6 x 30 6 5 6.5 100
0640ZNA 6 x 40 6 15 6.5 100
0650ZNA 6 x 50 6 25 6.5 100
0665ZNA 6 x 65 6 40 6.5 100
WIRE HANGERS Materials
Mainly for fixing lightweight ceilings
Specifically designed for use in the suspended

ceiling industry when securing suspension wires to
concrete beams.
Installation Guide Product Drill

ØxL Eye Ø Qty
Code Hole Ø
Boxes
0660WH 6 x 60 6 6.3 100
64
INSULATION FIXINGS CONCRETE & MASONRY ANCHORS
METAL INSULATION FIXINGS Materials
Designed for fixing insulation
Designed to anchor insulation material to concrete

and masonry substrate materials.
Installation Guide Product Drill

ØxL MFT Qty
Code Hole Ø
Bags
MIF60 8 x 60 8 10 100
MIF90 8 x 90 8 40 100
MIF110 8 x 110 8 60 100
MIF140 8 x 140 8 90 100
MIF170 8 x 170 8 120 50
MIF200 8 x 200 8 150 50
METAL INSULATION DISC ONLY
Product Head Hole Size

Qty
Code Ø Ø
Bags
MID35 35 5.0 100
PLASTIC INSULATION FIXINGS Materials
Designed for fixing insulation
Designed to anchor insulation material to concrete

and masonry substrate materials. One piece impact
resistant copolymer.
Product Drill
Installation Guide ØxL MFT Qty
Code Hole Ø
Bags
PIF50 8 x 50 8 1-20 100
PIF70 8 x 70 8 20-40 100
PIF90 8 x 90 8 50-60 100
PIF110 8 x 110 8 70-80 100
PIF130 8 x 130 8 90-100 100
65
CONCRETE & MASONRY ANCHORS NYLON FIXINGS
NYLON FIXINGS Materials
Fixes multiple applications into masonry/brick.
FRAME FIXINGS HAMMER FIXINGS
A versatile and reliable fixing for attaching to brick,

A light duty hammer-set through fixing for masonry.
block, stone, masonry and concrete.
Product Drill Product Drill
ØxL MFT Qty ØxL MFT Qty
Code Hole Ø Code Hole Ø
Boxes Boxes
08080NFF 8 x 80 8 40 100 50030HF 5 x 30 5 5 200
08100NFF 8 x 100 8 60 100 50050HF 5 x 50 5 25 200
08120NFF 8 x 120 8 80 100 60040HF 6 x 40 6 15 200
10080NFF 10 x 80 10 30 100 60050HF 6 x 50 6 25 200
10100NFF 10 x 100 10 50 100 60060HF 6 x 60 6 35 200
10120NFF 10 x 120 10 70 100 60070HF 6 x 70 6 45 200
10140NFF 10 x 140 10 90 100 60080HF 6 x 80 6 55 200
10160NFF 10 x 160 10 110 100 80060HF 8 x 60 8 20 100
80080HF 8 x 80 8 40 100
Bags 80100HF 8 x 100 8 60 100
08080NFFB 8 x 80 8 40 50 80120HF 8 x 120 8 80 100
08100NFFB 8 x 100 8 60 40 80140HF 8 x 140 8 100 100
10100NFFB 10 x 100 10 50 30
10120NFFB 10 x 120 10 70 25 Bags
10140NFFB 10 x 140 10 90 20 60040HFB 6 x 40 6 15 135
10160NFFB 10 x 160 10 110 15 60060HFB 6 x 60 6 35 100
60080HFB 6 x 80 6 55 80
Packs 80100HFB 8 x 100 8 60 40
08080NFFP 8 x 80 8 40 5
08100NFFP 8 x 100 8 60 4 Packs
10100NFFP 10 x 100 10 50 3 60040HFP 6 x 40 6 15 10
10120NFFP 10 x 120 10 70 2 60060HFP 6 x 60 6 35 10
10140NFFP 10 x 140 10 90 2 60080HFP 6 x 80 6 55 10
10160NFFP 10 x 160 10 110 2 80100HFP 8 x 100 8 60 8
FRAME ANCHORS
A traditional fixing for attaching doors and window

frames to masonry.
Product Drill
ØxL MFT Qty
Code Hole Ø
Boxes
08100NFA 8 x 100 8 50 100
08120NFA 8 x 120 8 70 100
08140NFA 8 x 140 8 90 100
10100NFA 10 x 100 10 50 100
10120NFA 10 x 120 10 70 100
10140NFA 10 x 140 10 90 100
66
MULTI-FIX SCREWS
MULTI-FIX CONCRETE
SCREW & MASONRY ANCHORS
MULTI-FIX SCREWS Materials
Fixes into multiple materials

Installation Guide
A rapid and effective light duty anchoring system for fixing into concrete, brick,
stone, concrete block and wood. This through fixing provides a single solution
and replaces traditional fixings such as nylon frame and hammer fixings.
CONCRETE SCREW - Yellow CONCRETE SCREW - Zinc (CR3)

Countersunk with high/low start thread Pan Head with high/low start thread
Product Drill FCH Product Drill FCH

Code Hole Ø Ø Code Hole Ø Ø
Boxes Boxes
00040TCON 7.5 x 40 6 5 8 100 7580MFPAN 7.5 x 80 6 30 8 100
00050TCON 7.5 x 50 6 15 8 100 75100MFPAN 7.5 x 100 6 50 8 100
00060TCON 7.5 x 60 6 25 8 100 75120MFPAN 7.5 x 120 6 70 8 100
00070TCON 7.5 x 70 6 35 8 100
00080TCON 7.5 x 80 6 30 8 100
00090TCON 7.5 x 90 6 40 8 100
00100TCON 7.5 x 100 6 50 8 100
00110TCON
00120TCON
7.5 x 110
7.5 x 120
6
6
60
70
8
8
100
100
MASONRY SCREW - Zinc (CR3)
00130TCON 7.5 x 130 6 80 8 100

Countersunk
00150TCON 7.5 x 150 6 100 8 100
00180TCON 7.5 x 180 6 130 8 100
00200TCON 7.5 x 200 6 150 8 100
Bags
00080TCONB 7.5 x 80 6 30 8 65 Product Drill FCH
ØxL MFT Qty
00100TCONB 7.5 x 100 6 50 8 55 Code Hole Ø Ø
00120TCONB 7.5 x 120 6 70 8 45
00200TCONB 7.5 x 200 6 150 8 30 Boxes
Packs 640MFCSK 6 x 40 5 15 6.5 100
660MFCSK 6 x 60 5 35 6.5 100
00080TCONP 7.5 x 80 6 30 8 5
680MFCSK 6 x 80 5 55 6.5 100
00100TCONP 7.5 x 100 6 50 8 4
6100MFCSK 6 x 100 5 63 6.5 100
00120TCONP 7.5 x 120 6 70 8 3
00200TCONP 7.5 x 200 6 150 8 2
Cover Caps
CAPW100 White 100
CAP0100 Light Oak 100
CAPM100 Mahogany 100 MASONRY SCREW - Zinc (CR3)

Pan Head
MIXED PACK - Yellow
Product Size
Qty Product Drill FCH
Code ØxL ØxL MFT Qty
Code Hole Ø Ø
Boxed Boxes
7.5 x 80 100 640MFPAN 6 x 40 5 15 6.5 100
7.5 x 100 100 660MFPAN 6 x 60 5 35 6.5 100
TCONPACK 7.5 x 120 100 680MFPAN 6 x 80 5 55 6.5 100
6 x 160 - SDS Drill Bit 1 6100MFPAN 6 x 100 5 63 6.5 100
T30 TIM Driver Bit 1 MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole
67
CONCRETE & MASONRY ANCHORS MULTI-FIX BOLT
MULTI-FIX BOLT Materials
Heavy duty non-expansion anchor

Installation Guide
This stress free, non-expansion through fixing is the new solution for
heavy duty anchoring into concrete, brick, stone, wood and concrete
block replacing the need for traditional anchors such as throughbolts,
shield, sleeve and drop-in anchors.
Product Drill FCH Product Drill FCH

Code Hole Ø Ø Code Hole Ø Ø
Boxes Bags
MF650 6 x 50 6 20 8 100 MF650B 6 x 50 6 20 8 64
MF675 6 x 75 6 45 8 100 MF860B 8 x 60 8 20 10 30
MF6100 6 x 100 6 55 8 100 MF875B 8 x 75 8 35 10 26
MF6130 6 x 130 6 85 8 100 MF8100B 8 x 100 8 60 10 18
MF6150 6 x 150 6 105 8 75 MF1060B 10 x 60 10 10 12 14
MF860 8 x 60 8 20 10 100 MF1075B 10 x 75 10 25 12 12
MF875 8 x 75 8 35 10 100 MF10100B 10 x 100 10 50 12 8
MF8100 8 x 100 8 60 10 50 MF10150B 10 x 150 10 100 12 12
MF8130 8 x 130 8 90 10 50 MF1275B 12 x 75 12 15 14 8
MF8150 8 x 150 8 110 10 50 MF12100B 12 x 100 12 40 14 6
MF1060 10 x 60 10 10 12 50 MF12130B 12 x 130 12 70 14 6
MF1075 10 x 75 10 25 12 50 MF12150B 12 x 150 12 90 14 6
MF10100 10 x 100 10 50 12 50 Packs
MF10130 10 x 130 10 80 12 50 MFB650B 6 x 50 6 20 8 25
MF10150 10 x 150 10 100 12 25 MFB860B 8 x 60 8 20 10 12
MF1275 12 x 75 12 15 14 50 MFB875B 8 x 75 8 35 10 10
MF12100 12 x 100 12 40 14 25 MFB8100B 8 x 100 8 60 10 8
MF12130 12 x 130 12 70 14 25 MFB1060B 10 x 60 10 10 12 15
MF12150 12 x 150 12 90 14 25 MFB1075B 10 x 75 10 25 12 12
MF12200 12 x 200 12 140 14 25 MFB10100B 10 x 100 10 50 12 10
MF16100 16 x 100 16 20 18 10 MFB10150B 10 x 150 10 100 12 7
MF16150 16 x 150 16 70 18 10 MFB1275B 12 x 75 12 15 14 8
MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole MFB12100B 12 x 100 12 40 14 7
MFB12150B 12 x 150 12 90 14 5
Resin
PE • PESF • VESF
See page 73
68
THROUGHBOLTS & DROP IN ANCHORS CONCRETE & MASONRY ANCHORS
THROUGHBOLTS DROP IN
Heavy duty applications into concrete ANCHORS
Materials Materials
The versatile through fixing for use in a wide range An internally threaded hammer set expansion
of anchoring applications into concrete. anchor for heavy duty anchoring into concrete.
Product Thread Drill FCH Product Thread Drill Anchor FCH

MFT Qty Qty
Code ØxL Hole Ø Ø Code Ø Hole Ø Length Ø
Boxes Boxes
0850TB M8 x 50 8 5 9 100 06WA M6 8 25 8 100
0865TB M8 x 65 8 10 9 100 08WA M8 10 30 10 100
0880TB M8 x 80 8 25 9 50 10WA M10 12 40 12 50
08100TB M8 x 100 8 45 9 50
12WA M12 16 50 14 50
08130TB M8 x 130 8 75 9 50
1065TB M10 x 65 10 5 12 50
1075TB M10 x 75 10 10 12 50
10100TB M10 x 100 10 35 12 50 LIPPED
10120TB M10 x 120 10 55 12 50
1280TB M12 x 80 12 5 14 50
12100TB M12 x 100 12 25 14 25
12120TB M12 x 120 12 45 14 25
12140TB M12 x 140 12 65 14 25
12180TB M12 x 180 12 105 14 25
16105TB M16 x 105 16 5 18 25 Product Thread Drill Anchor FCH
16125TB M16 x 125 16 20 18 25 Qty
Code Ø Hole Ø Length Ø
16150TB M16 x 150 16 45 18 15
16175TB M16 x 175 16 70 18 15 Boxes
20130TB M20 x 130 20 5 22 10
08LWA M8 10 30 10 100
20160TB M20 x 160 20 30 22 10
20215TB M20 x 215 20 85 22 8 1030LWA M10 12 30 12 50
Bags
0850TBB M8 x 50 8 5 9 40
10100TBB M10 x 100 10 35 12 18 SETTING TOOL
12100TBB M12 x 100 12 25 14 12
12120TBB M12 x 120 12 45 14 10
12140TBB M12 x 140 12 65 14 8
Packs
0850TBP M8 x 50 8 5 9 4 Product
To Fit Anchor Size Qty
10100TBP M10 x 100 10 35 12 2 Code
12100TBP M12 x 100 12 25 14 2
12140TBP M12 x 140 12 65 14 2 Boxes
06WAS M6 1
08WAS M8 1
10WAS M10 1
12WAS M12 1
69
FORGED
CONCRETE & MASONRY SHIELD ANCHORS
EYES & HOOKS
ANCHORS
SHIELD ANCHORS Materials
Installation Guide
A traditional metal expansion anchor designed for
anchoring into masonry and concrete.
LOOSE BOLTS PROJECTING BOLTS
A three segmented expansion anchor used in A three segmented expansion anchor used in
concrete, brick or stone. concrete, brick or stone.
Product Thread Drill FCH Product Thread Drill FCH

MFT Qty MFT Qty
Code ØxL Hole Ø Ø Code ØxL Hole Ø Ø
Boxes Boxes
0610LSH M6 x 50 12 10 8 100 0660PSH M6 x 110 12 60 8 50
0625LSH M6 x 65 12 25 8 50 0810PSH M8 x 70 14 10 10 50
0810LSH M8 x 60 14 10 10 50 0825PSH M8 x 85 14 25 10 50
0825LSH M8 x 75 14 25 10 50
0860PSH M8 x 120 14 60 10 50
0840LSH M8 x 90 14 40 10 25
1015PSH M10 x 85 16 15 12 25
1010LSH M10 x 70 16 10 12 25
1030PSH M10 x 100 16 30 12 25
1025LSH M10 x 85 16 25 12 25
1050LSH M10 x 110 16 50 12 25 1060PSH M10 x 130 16 60 12 25
1075LSH M10 x 135 16 75 12 25 1215PSH M12 x 105 20 15 14 10
1210LSH M12 x 90 20 10 14 10 1230PSH M12 x 120 20 30 14 10
1225LSH M12 x 105 20 25 14 10 1275PSH M12 x 165 20 75 14 10
1240LSH M12 x 120 20 40 14 10 Bags
1260LSH M12 x 140 20 60 14 10 0825PSHB M8 x 85 14 25 10 26
1630LSH M16 x 135 24 30 18 10
0860PSHB M8 x 120 14 60 10 22
1660LSH M16 x 165 24 60 18 10
1015PSHB M10 x 85 16 15 12 16
Bags 1030PSHB M10 x 100 16 30 12 15
0610LSHB M6 x 50 12 10 8 48
1060PSHB M10 x 130 16 60 12 14
0625LSHB M6 x 65 12 25 8 46
1230PSHB M12 x 120 20 30 14 8
0810LSHB M8 x 60 14 10 10 26
0825LSHB M8 x 75 14 25 10 24 Packs
0840LSHB M8 x 90 14 40 10 22 0825PSHP M8 x 85 14 25 10 4
1010LSHB M10 x 70 16 10 12 22 0860PSHP M8 x 120 14 60 10 4
1025LSHB M10 x 85 16 25 12 16 1015PSHP M10 x 85 16 15 12 2
1050LSHB M10 x 110 16 50 12 14 1030PSHP M10 x 100 16 30 12 2
1075LSHB M10 x 135 16 75 12 14 1060PSHP M10 x 130 16 60 12 2
1260LSHB M12 x 140 20 60 14 10 1230PSHP M12 x 120 20 30 14 2
Packs
0610LSHP M6 x 50 12 10 8 4
0625LSHP M6 x 65 12 25 8 4
0810LSHP M8 x 60 14 10 10 4
0825LSHP M8 x 75 14 25 10 4
0840LSHP M8 x 90 14 40 10 4
1010LSHP M10 x 70 16 10 12 4
1025LSHP M10 x 85 16 25 12 2
1050LSHP M10 x 110 16 50 12 2
1075LSHP M10 x 135 16 75 12 2
1260LSHP M12 x 140 20 60 14 2
70
FORGED EYES &
INSULATION HOOKS
THROUGHBOLTS
FIXINGS CONCRETE & MASONRY ANCHORS
FORGED EYES & HOOKS Materials
FORGED EYES FORGED EYES WITH SHIELDS
A useful threaded eye bolt for attaching ropes or Complete with three segment shield anchors, a
cables. forged eye for extra strength.
Product Thread Thread Product Thread Thread

Eye Ø Qty Eye Ø Qty
Code Ø Length Code Ø Length
Boxes Bags
06EYE M6 50 8 50 06EYEB M6 50 8 18
08EYE M8 60 10 50 08EYEB M8 60 10 14
10EYE M10 73 12 50 Packs
12EYE M12 95 16 25 06EYEP M6 50 8 2
08EYEP M8 60 10 2
FORGED HOOKS FORGED HOOKS WITH SHIELDS
A useful threaded hook bolt for attaching ropes or A useful threaded hook bolt with shield for attaching
cables. ropes or cables.
Product Thread Thread Product Thread Thread

Qty Qty
Code Ø Length Code Ø Length
Boxes Bags
06HOOK M6 50 50 06HOOKB M6 50 20
08HOOK M8 60 50 08HOOKB M8 60 16
10HOOK M10 73 50 Packs
12HOOK M12 90 25 06HOOKP M6 50 2
08HOOKP M8 60 2
SHIELD ONLY Product Thread Shield

Qty
Code Ø Length
Boxes
06SH M6 45 50
08SH M8 50 50
10SH M10 60 50
A three segmented expansion anchor used in
concrete, brick or stone with most types of metric 12SH M12 75 25
threaded component.
71
CONCRETE & MASONRY ANCHORS THREADED BAR & ANCHOR STUDS
THREADED BAR
Used with drop in anchors
Available in: Zinc
A versatile fully threaded bar used for hanging, connecting or fixing.
1 METER LENGTHS SHORTER LENGTHS (300mm)

Product Thread x Length Product Thread x Length
Qty Qty
Code (mm) Code (mm)
Packs Packs
06TBZ M6 x 1,000 10 06300TBZ M6 x 300 10
08TBZ M8 x 1,000 10 08300TBZ M8 x 300 10
10TBZ M10 x 1,000 10 10300TBZ M10 x 300 10
12TBZ M12 x 1,000 10 12300TBZ M12 x 300 10
16TBZ M16 x 1,000 10 16300TBZ M16 x 300 10
20TBZ M20 x 1,000 5
CHEMICAL ANCHOR STUDS

Used with Multi-Fix resin
Available in: Zinc Galv
External hex drive. Can be used with Multi-Fix resin. Embedment depth mark. Zinc plated and passivated
(3-5 microns) or hot dipped galvanised finishes. Chisel point prevents the rod turning when tightening.
CHEMICAL ANCHOR STUDS - Zinc CHEMICAL ANCHOR STUDS - Galv
Product Thread Ø Clearance Product Thread Ø Clearance

MFT Qty MFT Qty
Code x Length Hole Ø Code x Length Hole Ø
Boxes Boxes
08110CS M8 x 110 13 10 10 08110CSG M8 x 110 13 10 10
10130CS M10 x 130 20 12 10 10130CSG M10 x 130 20 12 10
12160CS M12 x 160 25 14 10 12160CSG M12 x 160 25 14 10
16190CS M16 x 190 35 18 10 16190CSG M16 x 190 35 18 10
20270CS M20 x 270 55 24 4 20270CSG M20 x 270 55 24 4
72
MULTI-FIX RESIN CONCRETE & MASONRY ANCHORS
MULTI-FIX RESIN
Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free
nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade
installation.
Materials
VINYLESTER STYRENE FREE
FIRE RATED R240 1501537
European Technically Approved (ETA) low odour Product

Size Approval
resin to be used in safety critical fixing. For enclosed, Code
poorly ventilated, damp and wet environments. This
high performance resin will give consistent results in Singles
a wide range of environments and conditions, whilst VESF410 410ml ETA / CE
offering exceptional tensile strength.
POLYESTER STYRENE FREE RESIN Materials
Product
Size Approval
Code
European Technically Approved (ETA) low odour

Singles
PESF310 300ml ETA / CE
resin, for day to day non-safety critical fixing. For
enclosed or poorly ventilated environments. (Not suitable in concrete that is or may become damp).
Materials
POLYESTER RESIN
Product
Size Approval
Code
Singles
An economic resin ideal for day to day non-safety PE310 300ml N/A
critical applications that are well ventilated at the PE410 410ml N/A
time of installation. (Not suitable in concrete that is or may become damp).
73
CONCRETE & MASONRY ANCHORS SEALANT & RESIN GUNS
SEALANT & RESIN GUNS

A range of guns used with syringe type cartridge
for dispensing sealants, caulk, chemical resins and
adhesives.
RESIN GUN
A 64mm heavy duty resin applicator gun with twin
5mm gripper plates providing four point contact
with the plunger rod. There is also a non-drip
mechanism.
Max
Product
Description Cartridge
Code
Dia (mm)
Singles
RESINGUN Chemical Resin Tool - 410ml 64
PROFESSIONAL GUN
A 48mm heavy duty sealant and caulking gun with
a convenient hook end for hanging. Ergonomically
designed for ease of use and a swivel action barrel
for easy application into tight corners. Patented
non-drip mechanism.
Max
Product
Code
Dia (mm)
Singles
PROGUN Professional Gun - 310ml 48
SKELETON GUN
A 48mm gun for dispensing sealants, caulk and

adhesives from standard syringe type cartridges.
It has strengthened side plates and a 6mm gripper
plate with a convenient hook end for hanging.
The front cap is riveted for reinforcement and the
gun comes with an integrated cleaning pin.
Max
Product
Code
Dia (mm)
Singles
SKELGUN Skeleton Gun 48
74
RESIN ACCESSORIES CONCRETE & MASONRY ANCHORS
RESIN ACCESSORIES
The cleaning of drill holes prior to injecting resin is
essential in order to ensure a safe fixing. Our range
of accessories include the tools required to ensure
effective hole cleaning. Nylon Sleeves assist with
fixing into hollow block or brick and spare mixer
nozzles are useful for smaller applications where a
full cartridge of resin is not extruded. Resin can then
be used for subsequent applications.
MIXING NOZZLES BLOW-OUT PUMP
Product Product
Description Qty Size (mm)
Code Code
Bags Singles
TNOZ Nozzle 12 PUMP 280
PLASTIC SLEEVES HOLE CLEANING BRUSHES
Product
Size (mm) Qty
Product Thread Socket Hole Ø Code
Qty
Code Ø x L (mm) Ø x L (mm) (mm)
Bags
Bags B13 13 10
1585CPS M8 - M10 16 x 85 16 100 B15 15 10
15130CPS M8 - M10 16 x 130 16 100 B22 22 10
INTERNALLY THREADED SOCKETS

Zinc
Product Thread Socket Hole Ø

Qty
Code Ø x L (mm) Ø x L (mm) (mm)
Boxes
10ITS M10 x 25 14 x 80 16 50
75
COLLATED AND
LOOSE NAILS
77 - CLIPPED HEAD NAILS 81 - BRIGHT NAILS 87 - COPPER NAILS
78 - BRAD NAILS 83 - GALVANISED NAILS 88 - COPPER DISC RIVETS
79 - FUEL CELLS 86 - SHERARDISED NAILS 88 - COPPER STRAPS
79 - POLYMER HEADED 87 - ALUMINIUM NAILS 88 - MASONRY NAILS
CLIPPED HEAD COLLATED NAILS COLLATED & LOOSE NAILS
FIRMAHOLD CLIPPED HEAD NAILS

For structural applications
To BS
EN ISO
14592:2
008
Available in: Bright FirmaGalv FirmaGalv+ Hot Dipped A2/Aust. SS
Tested by
*
For use in structural applications using high quality

paper collation for reduced nail jams. Various
levels of rust protection to comply with building
regulation and meet with all service classes.
CLIPPED HEAD - GAS CLIPPED HEAD - GAS

Product Coating Shank Product Coating Shank
Dia. Length Dia. Length
Code Type Type Code Type Type
Boxes of 3,300 & 3 Fuel Cells Boxes of 3,300

CBRT50G 2.8 50 Bright Ringed CBRT50 2.8 50 Bright Ringed
CFGT50G 2.8 50 FirmaGalv Ringed CFGT50 2.8 50 FirmaGalv Ringed
CPLT50G 2.8 50 FirmaGalv + Ringed CPLT50 2.8 50 FirmaGalv + Ringed
CHDT50G 2.8 50 HDGV Ringed CHDT50 2.8 50 HDGV Ringed
CHDT63G 2.8 63 HDGV Ringed CHDT63 2.8 6.3 HDGV Ringed
CPLT63RG 3.1 63 FirmaGalv + Ringed CPLT63R 3.1 63 FirmaGalv + Ringed
Boxes of 2,200 & 2 Fuel Cells Boxes of 2,200
CHDT75G 3.1 75 HDGV Ringed CHDT75 3.1 75 HDGV Ringed
CFGT85PG 3.1 85 FirmaGalv Part Ring CFGT85P 3.1 85 FirmaGalv Part Ring
CBRT90G 3.1 90 Bright Plain CBRT90 3.1 90 Bright Plain
CFGT90G 3.1 90 FirmaGalv Plain CFGT90 3.1 90 FirmaGalv Plain
CPLT90G 3.1 90 FirmaGalv + Plain CPLT90 3.1 90 FirmaGalv + Plain
CHDT90G 3.1 90 HDGV Plain CHDT90 3.1 90 HDGV Plain
CPLT90PG 3.1 90 FirmaGalv + Part Ring CPLT90P 3.1 90 FirmaGalv + Part Ring
Boxes of 1,100 & 1 Fuel Cell Boxes of 1,100
CFGR50G 2.8 50 FirmaGalv Ringed CFGR50 2.8 50 FirmaGalv Ringed
CFGR63G 2.8 63 FirmaGalv Ringed CSSR50 2.8 50 A2 SS Ringed
CFGR75G 3.1 75 FirmaGalv Ringed CFGR63 2.8 63 FirmaGalv Ringed
CFGR85PG 3.1 85 FirmaGalv Part Ring CSSR63 2.8 63 A2 SS Ringed
CFGR90G 3.1 90 FirmaGalv Plain CFGR75 3.1 75 FirmaGalv Ringed
CPLR63RG 3.1 63 FirmaGalv+ Ringed CFGR85P 3.1 85 FirmaGalv Part Ring
CSSR50G 2.8 50 A2 SS Ringed CFGR90 3.1 90 FirmaGalv Plain
CSSR63G 2.8 63 A2 SS Ringed
*Notified Test Laboratory 2389 for EN 14592 Timber Structures - Dowel Type Fasteners - Requirements
77
COLLATED & LOOSE NAILS COLLATED BRAD NAILS
FIRMAHOLD BRAD NAILS

Perfect for indoor use
Available in: Galv. A2/Aust. SS
Ideal for internal applications such as skirting,

architrave, tongue and groove fixing, with a T head
for a concealed finish. Also available in stainless steel
for hardwood applications.
16 GAUGE STRAIGHT BRADS - GAS 16 GAUGE ANGLED BRADS - GAS

Product Coating Nails
Gauge Length Product Coating Nails
Code Type Per Strip Gauge Length
Code Type Per Strip
Boxes of 2,000 & 2 Fuel Cells Boxes of 2,000 & 2 Fuel Cells
BG1619G 16 19 Galv. 50
ABG1632G 16 32 Galv. 50
BG1625G 16 25 Galv. 50
ABG1638G 16 38 Galv. 50
BG1632G 16 32 Galv. 50
ABG1645G 16 45 Galv. 50
BG1638G 16 38 Galv. 50
ABG1650G 16 50 Galv. 50
BG1645G 16 45 Galv. 50
ABG1664G 16 64 Galv. 50
BG1650G 16 50 Galv. 50
ABSS1638G 16 38 A2 SS 50
BG1664G 16 64 Galv. 50
ABSS1650G 16 50 A2 SS 50
BSS1638G 16 38 A2 SS 50
BSS1650G 16 50 A2 SS 50
16 GAUGE ANGLED BRADS - GAS

16 GAUGE STRAIGHT BRADS - GAS
Gauge Length
Product Coating Nails Code Type Per Strip
Gauge Length
Code Type Per Strip
Boxes of 2,000
Boxes of 2,000 ABG1632 16 32 Galv. 50
BG1619 16 19 Galv. 50 ABG1638 16 38 Galv. 50
BG1625 16 25 Galv. 50 ABG1645 16 45 Galv. 50
BG1632 16 32 Galv. 50 ABG1650 16 50 Galv. 50
BG1638 16 38 Galv. 50 ABG1664 16 64 Galv. 50
BG1645 16 45 Galv. 50 ABSS1638 16 38 A2 SS 50
BG1650 16 50 Galv. 50 ABSS1650 16 50 A2 SS 50
BG1664 16 64 Galv. 50
BSS1638 16 38 A2 SS 50
BSS1650 16 50 A2 SS 50
18 GAUGE STRAIGHT BRADS - GAS

Gauge Length
Code Type Per Strip
Boxes of 5,000
BG1816 18 16 Galv. 100
BG1819 18 19 Galv. 100
BG1825 18 25 Galv. 100
BG1832 18 32 Galv. 100
BG1838 18 38 Galv. 100
BG1845 18 45 Galv. 100
BG1850 18 50 Galv. 100
78
FUEL CELLS & POLYMER HEADED NAILS COLLATED & LOOSE NAILS
FUEL CELLS
For use with framing & finishing nail guns
Manufactured to European standards. Cleaned propane and butane gas for

improved the working environment. Fully synthetic oil for reduced carbon
deposition. High quality propellant to prevent leakage and increase shelf life.
Gas filled in accordance with European Regulations (75/324/EWG).
Product Size
Description Qty
Code (ml)
Packs
CFC CFC Framing Nailer Fuel Cell 80 2
BFC BFC Finishing Nailer Fuel Cell 30 2
POLYMER HEADED NAILS & PINS White Oak Mahogany Black
Available in: A4 SS
A coloured poly headed marine grade stainless steel pin or nail designed to secure fascia, soffit and
window boards.
POLYMER HEADED NAILS POLYMER HEADED PINS
Product Size Head Ø Box Product Size Head Ø Box

Finish Finish
Code (mm) (mm) Qty Code (mm) (mm) Qty
Boxes Boxes
PN40W White 40 12 100 PP25M Mahogany 25 6.4 250
PN50W White 50 12 100 PP25W White 25 6.4 250
PN50O Oak 50 12 100 PP25BEIGE Beige 25 6.4 250
PN50BR Mahogany 50 12 100 PP30W White 30 6.4 250
PN50BL Black 50 12 100 PP30O Oak 30 6.4 250
PN65W White 65 12 100
PP30BR Mahogany 30 6.4 250
PN65BR Mahogany 65 12 100
PP30BL Black 30 6.4 250
PN65BL Black 65 12 100
PP40W White 40 6.4 250
PP40O Oak 40 6.4 250
PP40BR Mahogany 40 6.4 250
CLAD PINS PP40BL Black 40 6.4 250
Product Size Shank Ø Head Ø Box

Code (mm) (mm) (mm) Qty
Boxes
CP30 30 2.1 4 250
79
COLLATED & LOOSE NAILS BRIGHT LOOSE NAILS
BRIGHT LOOSE NAILS

Bright loose nails covering all aspects of
internal uses. Available in a wide variety
of packaging options to suit any job size.
ANNULAR RINGSHANK PANEL PINS

For additional strength For light duty applications
Annular rings provide additional holding power, A light weight nail, commonly used for cabinet
where additional grip is required. making and light duty applications.
Product Length Shank Dia. Product Length Shank Dia.
Qty Qty
Packs Packs
BAR25P 25 2.00 150 PPB25P 25 1.60 250
BAR50P 50 2.65 50 PPB30P 30 1.60 200
BAR65P 65 3.35 30 PPB40P 40 1.60 100
500g Bags PPB50P 50 1.60 50
BAR20MB 20 2.00 500g
200g Bags
BAR25MB 25 2.00 500g
BPP25P 25 1.60 200g
BAR30MB 30 2.36 500g
BAR40MB 40 2.36 500g
500g Bags
BPP25MB 25 1.60 500g
BAR50MB 50 2.65 500g
BAR65MB 65 3.35 500g BPP30MB 30 1.60 500g
BAR75MB 75 3.75 500g BPP40MB 40 1.60 500g
1kg Bags BPP50MB 50 1.60 500g
BAR20B 20 2.00 1kg 1kg Bags
BAR25B 25 2.00 1kg BPP25B 25 1.60 1kg
BAR30B 30 2.36 1kg BPP30B 30 1.60 1kg
BAR40B 40 2.36 1kg BPP40B 40 1.60 1kg
BAR50B 50 2.65 1kg BPP50B 50 1.60 1kg
BAR65B 65 3.35 1kg 2.5kg Bags
BAR75B 75 3.75 1kg BPP25LB 25 1.60 2.5kg
2.5kg Bags BPP30LB 30 1.60 2.5kg
BAR20LB 20 2.00 2.5kg
BPP40LB 40 1.60 2.5kg
BAR25LB 25 2.00 2.5kg
BPP50LB 50 1.60 2.5kg
BAR30LB 30 2.36 2.5kg
BAR40LB 40 2.36 2.5kg 2.5kg Tubs
BAR50LB 50 2.65 2.5kg BPP25T 25 1.60 2.5kg
BAR65LB 65 3.35 2.5kg BPP30T 30 1.60 2.5kg
BAR75LB 75 3.75 2.5kg BPP40T 40 1.60 2.5kg
2.5kg Tubs BPP50T 50 1.60 2.5kg
BAR20T 20 2.00 2.5kg 25kg Boxes
BAR25T 25 2.00 2.5kg BPP25 25 1.60 25kg
BAR30T 30 2.36 2.5kg BPP30 30 1.60 25kg
BAR40T 40 2.36 2.5kg BPP40 40 1.60 25kg
BAR50T 50 2.65 2.5kg BPP50 50 1.60 25kg
BAR65T 65 3.35 2.5kg
BAR75T 75 3.75 2.5kg
25kg Boxes
BAR20 20 2.00 25kg
BAR25 25 2.00 25kg
BAR30 30 2.36 25kg
BAR40 40 2.36 25kg
BAR50 50 2.65 25kg
BAR65 65 3.35 25kg
BAR75 75 3.75 25kg
80
BRIGHT LOOSE NAILS COLLATED & LOOSE NAILS
ROUND WIRE OVAL NAILS

General purpose nail Where appearance is important
Used where strength is essential. Perfect for skirting and architrave. due to the flat
shank which reduces splitting.
Product Length Shank Dia.

Qty
Code (mm) (mm)
500g Bags
BRW40MB 40 2.65 500g
BRW50MB 50 2.65 500g
BRW65MB 65 3.35 500g
BRW75MB 75 3.75 500g
BRW100MB 100 4.50 500g
BRW125MB 125 5.60 500g
BRW150MB 150 6.00 500g Product Length
Qty
1kg Bags Code (mm)
BRW40B 40 2.65 1kg 500g Bags

BRW50B 50 2.65 1kg BON40MB 40 500g
BRW65B 65 3.35 1kg BON50MB 50 500g
BRW75B 75 3.75 1kg BON65MB 65 500g
BRW100B 100 4.50 1kg BON75MB 75 500g
BRW125B 125 5.60 1kg BON100MB 100 500g
BRW150B 150 6.00 1kg 1kg Bags
2.5kg Bags BON40B 40 1kg
BRW40LB 40 2.65 2.5kg BON50B 50 1kg
BRW50LB 50 2.65 2.5kg BON65B 65 1kg
BRW65LB 65 3.35 2.5kg BON75B 75 1kg
BRW75LB 75 3.75 2.5kg BON100B 100 1kg
BRW100LB 100 4.50 2.5kg 2.5kg Bags
BRW125LB 125 5.60 2.5kg BON40LB 40 2.5kg
BRW150LB 150 6.00 2.5kg BON50LB 50 2.5kg
2.5kg Tubs BON65LB 65 2.5kg
BRW40T 40 2.65 2.5kg BON75LB 75 2.5kg
BRW50T 50 2.65 2.5kg BON100LB 100 2.5kg
BRW65T 65 3.35 2.5kg 2.5kg Tubs
BRW75T 75 3.75 2.5kg BON40T 40 2.5kg
BRW100T 100 4.50 2.5kg BON50T 50 2.5kg
BRW125T 125 5.60 2.5kg BON65T 65 2.5kg
BRW150T 150 6.00 2.5kg BON75T 75 2.5kg
10kg Tubs BON100T 100 2.5kg
BRW40LT 40 2.65 10kg 25kg Boxes
BRW50LT 50 2.65 10kg BON40 40 25kg
BRW65LT 65 3.35 10kg BON50 50 25kg
BRW75LT 75 3.75 10kg BON65 65 25kg
BRW100LT 100 4.50 10kg BON75 75 25kg
25kg Boxes BON100 100 25kg
BRW40 40 2.65 25kg
BRW50 50 2.65 25kg
BRW65 65 3.35 25kg
BRW75 75 3.75 25kg
BRW100 100 4.50 25kg
BRW125 125 5.60 25kg
BRW150 150 6.00 25kg
81
COLLATED & LOOSE NAILS BRIGHT LOOSE NAILS
ROUND LOST HEAD CUT FLOORING BRADS

For a concealed finish Perfect for floor boards
For second fix applications, where the head can be A traditional nail used for fixing floor boards.
punched below the surface for a concealed finish.
Product Length
Qty
Code (mm)
500g Bags
CFB50MB 50 500g
CFB65MB 65 500g
1kg Bags
CFB50B 50 1kg
CFB65B 65 1kg
2.5kg Bags
CFB50LB 50 2.5kg
CFB65LB 65 2.5kg
2.5kg Tubs
CFB50T 50 2.5kg
CFB65T 65 2.5kg
25kg Boxes
CFB50 50 25kg
CFB65 65 25kg
CUT CLASP NAILS

Product Length Shank Dia. A traditional nail
Qty
Code (mm) (mm)
500g Bags
BLH40MB 40 2.36 500g
BLH50MB 50 3.00 500g Cut clasps nails provide a more traditional fixing into
BLH65MB 65 3.35 500g
timber.
1kg Bags Product Length
BLH40B 40 2.36 1kg Qty
Code (mm)
BLH50B 50 3.00 1kg
BLH65B 65 3.35 1kg
500g Bags
BCN50MB 50 500g
2.5kg Bags BCN65MB 65 500g
BLH40LB 40 2.36 2.5kg BCN75MB 75 500g
BLH50LB 50 3.00 2.5kg BCN100MB 100 500g
BLH65LB 65 3.35 2.5kg 1kg Bags
2.5kg Tubs BCN50B 50 1kg
BCN65B 65 1kg
BLH40T 40 2.36 2.5kg
BCN75B 75 1kg
BLH50T 50 3.00 2.5kg BCN100B 100 1kg
BLH65T 65 3.35 2.5kg 2.5kg Bags
25kg Boxes BCN50LB 50 2.5kg
BLH40 40 2.36 25kg BCN65LB 65 2.5kg
BLH50 50 3.00 25kg BCN75LB 75 2.5kg
BCN100LB 100 2.5kg
BLH65 65 3.35 25kg
2.5kg Tubs
BCN50T 50 2.5kg
BCN65T 65 2.5kg
BCN75T 75 2.5kg
BCN100T 100 2.5kg
25kg Boxes
BCN50 50 25kg
BCN65 65 25kg
BCN75 75 25kg
BCN100 100 25kg
82
GALVANISED LOOSE NAILS COLLATED & LOOSE NAILS
GALVANISED
LOOSE NAILS
Mechanically galvanised for external use
covering a wide variety of applications.
Available in a wide variety of packaging
options to suit any job size.
SQUARE TWIST ELH CLOUT

For use with joist hangers Extra large head
For use with all types of builders metal work. Extra large diameter head for extra clamping, perfect
Product Length Shank Dia. for fitting roofing felt and plasterboard.
Qty
Code (mm) (mm)
Qty
500g Bags Code (mm) (mm)
GST30MB 30 3.75 500g
GST40MB 40 3.75 500g
Packs
GEC30P 30 3.00 100
1kg Bags
GEC40P 40 3.00 75
GST30B 30 3.75 1kg
GEC50P 50 3.00 50
GST40B 40 3.75 1kg
2.5kg Bags 500g Bags
GST30LB 30 3.75 2.5kg GEC13MB 13 3.00 500g
GST40LB 40 3.75 2.5kg GEC20MB 20 3.00 500g
2.5kg Tubs GEC25MB 25 3.00 500g
GST30T 30 3.75 2.5kg GEC30MB 30 3.00 500g
GST40T 40 3.75 2.5kg GEC40MB 40 3.00 500g
10kg Tubs GEC50MB 50 3.00 500g
GST30LT 30 3.75 10kg 1kg Bags
25kg Boxes GEC13B 13 3.00 1kg
GST30 30 3.75 25kg GEC20B 20 3.00 1kg
GST40 40 3.75 25kg GEC25B 25 3.00 1kg
GEC30B 30 3.00 1kg
GEC40B 40 3.00 1kg
SLAB NAILS GEC50B 50 3.00 1kg
2.5kg Bags
For fixing insulation slabs to wood. GEC13LB 13 3.00 2.5kg
GEC20LB 20 3.00 2.5kg
GEC25LB 25 3.00 2.5kg
GEC30LB 30 3.00 2.5kg
Qty GEC40LB 40 3.00 2.5kg
Code (mm) (mm)
GEC50LB 50 3.00 2.5kg
500g Bags 2.5kg Tubs
SLN100MB 100 82 500g GEC13T 13 3.00 2.5kg
SLN125MB 125 71 500g GEC20T 20 3.00 2.5kg
SLN150MB 150 60 500g GEC25T 25 3.00 2.5kg
SLN180MB 180 38 500g
GEC30T 30 3.00 2.5kg
SLN200MB 200 36 500g
GEC40T 40 3.00 2.5kg
1kg Bags GEC50T 50 3.00 2.5kg
SLN100B 100 82 1kg
SLN125B 125 71 1kg
10kg Tubs
GEC13LT 13 3.00 10kg
SLN150B 150 60 1kg
SLN180B 180 38 1kg GEC20LT 20 3.00 10kg
SLN200B 200 36 1kg 25kg Boxes
10kg Boxes GEC13 13 3.00 25kg
SLN100 100 82 10kg GEC20 20 3.00 25kg
SLN125 125 71 10kg GEC25 25 3.00 25kg
SLN150 150 60 10kg GEC30 30 3.00 25kg
SLN180 180 38 10kg GEC40 40 3.00 25kg
SLN200 200 36 10kg GEC50 50 3.00 25kg
83
COLLATED & LOOSE NAILS GALVANISED LOOSE NAILS
CLOUT ROUND WIRE

General purpose nail General purpose nail
Perfect for roofing applications. Used where strength is essential.
Length Shank Dia. Product Length Shank Dia.

Product Code Qty Qty
(mm) (mm) Code (mm) (mm)
Packs Packs
GCN30P 30 2.65 125 GRW40P 40 2.65 75
GCN40P 40 2.65 100 GRW50P 50 2.65 50
GCN50P 50 2.65 50 GRW65P 65 3.35 40
GCN75P 75 3.75 25 GRW75P 75 3.75 25
500g Bags GRW100P 100 4.50 15
GCN25MB 25 2.65 500g GRW125P 125 5.60 10
GCN30MB 30 2.65 500g GRW150P 150 6.00 8
GCN40MB 40 2.65 500g 500g Bags
GCN33540MB 40 3.35 500g GRW40MB 40 2.65 500g
GCN50MB 50 2.65 500g GRW50MB 50 2.65 500g
GCN33550MB 50 3.35 500g GRW26565MB 65 2.65 500g
GCN26565MB 65 2.65 500g GRW65MB 65 3.35 500g
GCN65MB 65 3.75 500g GRW75MB 75 3.75 500g
GCN75MB 75 3.75 500g GRW100MB 100 4.50 500g
1kg Bags GRW125MB 125 5.60 500g
GCN25B 25 2.65 1kg GRW150MB 150 6.00 500g
GCN30B 30 2.65 1kg 1kg Bags
GCN40B 40 2.65 1kg GRW40B 40 2.65 1kg
GCN33540B 40 3.35 1kg GRW50B 50 2.65 1kg
GCN50B 50 2.65 1kg GRW26565B 65 2.65 1kg
GCN33550B 50 3.35 1kg GRW65B 65 3.35 1kg
GCN26565B 65 2.65 1kg GRW75B 75 3.75 1kg
GCN65B 65 3.75 1kg GRW100B 100 4.50 1kg
GCN75B 75 3.75 1kg GRW125B 125 5.60 1kg
2.5kg Bags GRW150B 150 6.00 1kg
GCN25LB 25 2.65 2.5kg 2.5kg Bags
GCN30LB 30 2.65 2.5kg GRW40LB 40 2.65 2.5kg
GCN40LB 40 2.65 2.5kg GRW50LB 50 2.65 2.5kg
GCN33540LB 40 3.35 2.5kg GRW26565LB 65 2.65 2.5kg
GCN50LB 50 2.65 2.5kg GRW65LB 65 3.35 2.5kg
GCN33550LB 50 3.35 2.5kg GRW75LB 75 3.75 2.5kg
GCN26565LB 65 2.65 2.5kg GRW100LB 100 4.50 2.5kg
GCN65LB 65 3.75 2.5kg GRW125LB 125 5.60 2.5kg
GCN75LB 75 3.75 2.5kg GRW150LB 150 6.00 2.5kg
2.5kg Tubs 2.5kg Tubs
GCN25T 25 2.65 2.5kg GRW40T 40 2.65 2.5kg
GCN30T 30 2.65 2.5kg GRW50T 50 2.65 2.5kg
GCN40T 40 2.65 2.5kg GRW26565T 65 2.65 2.5kg
GCN33540T 40 3.35 2.5kg GRW65T 65 3.35 2.5kg
GCN50T 50 2.65 2.5kg GRW75T 75 3.75 2.5kg
GCN33550T 50 3.35 2.5kg GRW100T 100 4.50 2.5kg
GCN26565T 65 2.65 2.5kg GRW125T 125 5.60 2.5kg
GCN65T 65 3.75 2.5kg GRW150T 150 6.00 2.5kg
GCN75T 75 3.75 2.5kg 10kg Tubs
10kg Tubs GRW40LT 40 2.65 10kg
GCN30LT 30 2.65 10kg GRW50LT 50 2.65 10kg
GCN40LT 40 2.65 10kg GRW26565LT 65 2.65 10kg
25kg Boxes GRW65LT 65 3.35 10kg
GCN25 25 2.65 25kg GRW75LT 75 3.75 10kg
GCN30 30 2.65 25kg GRW100LT 100 4.50 10kg
GCN40 40 2.65 25kg 25kg Boxes
GCN33540 40 3.35 25kg GRW40 40 2.65 25kg
GCN50 50 2.65 25kg GRW50 50 2.65 25kg
GCN33550 50 3.35 25kg GRW26565 65 2.65 25kg
GCN26565 65 2.65 25kg GRW65 65 3.35 25kg
GCN65 65 3.75 25kg GRW75 75 3.75 25kg
GCN75 75 3.75 25kg GRW100 100 4.50 25kg
GRW125 125 5.60 25kg
GRW150 150 6.00 25kg
84
GALVANISED LOOSE NAILS COLLATED & LOOSE NAILS
JAGGED PLASTERBOARD PRESSER POINT STAPLES

For fixing plasterboard For fencing applications
Traditional
alternative to the Used for fixing fencing and
drywall screw. wire mesh.
Product Length Shank Dia. Product Shank Dia.
Qty Length
Code (mm) (mm) Qty
Code (mm) (mm)
500g Bags Packs
JPN30MB 30 2.65 500g
PPS20P 20 2.00 75
JPN40MB 40 2.65 500g
PPS25P 25 2.65 60
1kg Bags PPS30P 30 3.35 30
JPN30B 30 2.65 1kg PPS40P 40 4.00 20
JPN40B 40 2.65 1kg
500g Bags
2.5kg Bags PPS20MB 20 2.00 500g
JPN30LB 30 2.65 2.5kg PPS25MB 25 2.65 500g
JPN40LB 40 2.65 2.5kg PPS30MB 30 3.35 500g
2.5kg Tubs PPS40MB 40 4.00 500g
JPN30T 30 2.65 2.5kg PPS50MB 50 4.00 500g
JPN40T 40 2.65 2.5kg 1kg Bags
25kg Boxes PPS20B 20 2.00 1kg
JPN30 30 2.65 25kg PPS25B 25 2.65 1kg
JPN40 40 2.65 25kg PPS30B 30 3.35 1kg
PPS40B 40 4.00 1kg
PPS50B 50 4.00 1kg
2.5kg Bags
DRIVE SCREW PPS20LB 20 2.00 2.5kg
For roofing applications Fixing roofing and
PPS25LB 25 2.65 2.5kg
PPS30LB 30 3.35 2.5kg
cladding sheets to PPS40LB 40 4.00 2.5kg
timber purlins. PPS50LB 50 4.00 2.5kg
2.5kg Tubs
Product Length Shank Dia. PPS20T 20 2.00 2.5kg
Qty PPS25T 25 2.65 2.5kg
Code (mm) (mm)
PPS30T 30 3.35 2.5kg
500g Bags PPS40T 40 4.00 2.5kg
DSN50MB 50 5.40 500g PPS50T 50 4.00 2.5kg
DSN65MB 65 5.40 500g
25kg Boxes
DSN75MB 75 5.40 500g
PPS20 20 2.00 25kg
DSN100MB 100 5.40 500g
PPS25 25 2.65 25kg
DSN125MB 125 6.40 500g
PPS30 30 3.35 25kg
DSN150MB 150 6.40 500g
PPS40 40 4.00 25kg
1kg Bags PPS50 50 4.00 25kg
DSN50B 50 5.40 1kg
DSN65B 65 5.40 1kg
DSN75B 75 5.40 1kg
DSN100B 100 5.40 1kg
DSN125B 125 6.40 1kg
DSN150B 150 6.40 1kg SPRING HEAD
2.5kg Bags For fixing corrugated sheeting
DSN50LB 50 5.40 2.5kg
DSN65LB 65 5.40 2.5kg
DSN75LB 75 5.40 2.5kg
DSN100LB 100 5.40 2.5kg
DSN125LB 125 6.40 2.5kg
DSN150LB 150 6.40 2.5kg
Twisted shank gives a very strong purchase.
2.5kg Tubs
DSN50T 50 5.40 2.5kg Product Length Shank Dia.
Qty
DSN65T 65 5.40 2.5kg Code (mm) (mm)
DSN75T 75 5.40 2.5kg 500g Bags
DSN100T 100 5.40 2.5kg GSN65MB 65 3.35 500g
DSN125T 125 6.40 2.5kg
DSN150T 150 6.40 2.5kg
1kg Bags
GSN65B 65 3.35 1kg
25kg Boxes
DSN50 50 5.40 25kg
2.5kg Bags
GSN65LB 65 3.35 2.5kg
DSN65 65 5.40 25kg
DSN75 75 5.40 25kg 2.5kg Tubs
DSN100 100 5.40 25kg GSN65T 65 3.35 2.5kg
DSN125 125 6.40 25kg 10kg Boxes
DSN150 150 6.40 25kg GSN65 65 3.35 10kg
85
COLLATED & LOOSE NAILS SHERARDISED LOOSE NAILS
SHERARDISED
NAILS
For medium duty rust protection.
Available in a wide variety of packaging
options to suit any job size.
ANNULAR RINGSHANK PANEL PINS

For additional strength For light duty applications
Annular rings provide additional holding power, A light weight nail, commonly used for cabinet
where additional grip is required. making and light duty applications.

Qty Qty
500g Bags 500g Bags

SPP25MB 25 1.60 500g
SAR40MB 40 2.65 500g
SPP30MB 30 1.60 500g
SAR50MB 50 2.65 500g SPP40MB 40 1.60 500g
SAR65MB 65 3.35 500g SPP50MB 50 2.00 500g
SAR75MB 75 3.75 500g 1kg Bags
SAR100MB 100 5.0 500g SPP25B 25 1.60 1kg
1kg Bags SPP30B 30 1.60 1kg
SPP40B 40 1.60 1kg
SAR40B 40 2.65 1kg
SPP50B 50 2.00 1kg
SAR50B 50 2.65 1kg
25kg Boxes
SAR65B 65 3.35 1kg SPP25 25 1.60 25kg
SAR75B 75 3.75 1kg SPP30 30 1.60 25kg
SAR100B 100 5.0 1kg SPP40 40 1.60 25kg
2.5kg Bags SPP50 50 2.00 25kg
SAR40LB 40 2.65 2.5kg
SAR50LB 50 2.65 2.5kg
SAR65LB 65 3.35 2.5kg
SAR75LB 75 3.75 2.5kg SQUARE TWIST
SAR100LB 100 5.0 2.5kg For use with joist hangers
2.5kg Tubs
SAR40T 40 2.65 2.5kg
SAR50T 50 2.65 2.5kg
SAR65T 65 3.35 2.5kg For use with all types of builders metal work.
SAR75T 75 3.75 2.5kg
SAR100T 100 5.0 2.5kg Product Length Shank Dia.
Qty
25kg Boxes Code (mm) (mm)
SAR40 40 2.65 25kg
500g Bags
SAR50 50 2.65 25kg SST30MB 30 3.75 500g
SAR65 65 3.35 25kg SST40MB 40 3.75 500g
SAR75 75 3.75 25kg 1kg Bags
SAR100 100 5.0 25kg SST30B 30 3.75 1kg
SST40B 40 3.75 1kg
2.5kg Bags
SST30LB 30 3.75 2.5kg
SST40LB 40 3.75 2.5kg
2.5kg Tubs
SST30T 30 3.75 2.5kg
SST40T 40 3.75 2.5kg
10kg Tubs
SST30LT 30 3.75 10kg
SST40LT 40 3.75 10kg
25kg Boxes
SST30 30 3.75 25kg
SST40 40 3.75 25kg
86
ALUMINIUM & COPPER LOOSE NAILS COLLATED & LOOSE NAILS
ALUMINIUM NAILS COPPER NAILS

Manufactured using high quality Manufactured using high quality copper.
aluminium. These nails are ideal for all These nails and straps are ideal for all
types of roofing work including slate. types of roofing work including slate.
Providing high levels of rust protection. Providing high levels of rust protection.
CLOUT CLOUT
For roofing applications For roofing applications
Large diameter head, commonly used for tile Large diameter head, perfect for attaching roofing
hanging. felt, slate and shingles

Qty Qty
250g Bags 500g Bags

ACN30B 30 2.65 250g COP225MB 25 2.65 500g
ACN40B 40 3.35 250g COP325MB 25 3.35 500g
ACN50B 50 3.35 250g COP230MB 30 2.65 500g
ACN65B 65 3.35 250g COP330MB 30 3.35 500g
1kg Bags COP238MB 38 2.65 500g
ACN30LB 30 2.65 1kg COP338MB 38 3.35 500g
ACN40LB 40 3.35 1kg COP350MB 50 3.35 500g
ACN50LB 50 3.35 1kg 1kg Bags
ACN65LB 65 3.35 1kg COP225B 25 2.65 1kg
1kg Tubs COP325B 25 3.35 1kg
ACN30T 30 2.65 1kg COP230B 30 2.65 1kg
ACN40T 40 3.35 1kg COP330B 30 3.35 1kg
ACN50T 50 3.35 1kg COP238B 38 2.65 1kg
ACN65T 65 3.35 1kg COP338B 38 3.35 1kg
10kg Boxes COP350B 50 3.35 1kg
ACN30 30 2.65 10kg 2.5kg Bags
ACN40 40 3.35 10kg COP225LB 25 2.65 2.5kg
ACN50 50 3.35 10kg COP325LB 25 3.35 2.5kg
ACN65 65 3.35 10kg COP230LB 30 2.65 2.5kg
COP330LB 30 3.35 2.5kg
COP238LB 38 2.65 2.5kg
COP338LB 38 3.35 2.5kg
COP350LB 50 3.35 2.5kg
2.5kg Tubs
COP225T 25 2.65 2.5kg
COP325T 25 3.35 2.5kg
COP230T 30 2.65 2.5kg
COP330T 30 3.35 2.5kg
COP238T 38 2.65 2.5kg
COP338T 38 3.35 2.5kg
COP350T 50 3.35 2.5kg
87
COLLATED & LOOSE NAILS MASONRY LOOSE NAILS
COPPER DISC RIVETS COPPER STRAPS

For fixing fibre cement slates For use with copper clouts for fixing slate
Large diameter head, perfect for attaching fibre Used to prevent slate and shingles from slipping.
cement slates
Product Length Shank Dia. Product Length Width

Qty Qty
Bags Bags
CDRB 20 1.50 250 CSS150P 150 13 10
Tubs CSS150B 150 13 100
CDRT 20 1.50 1,000
MASONRY NAILS ROUND HEAD

For fixing timber to masonry
For heavy duty applications with a round head for

additional clamping.
FLAT HEAD
For fixing timber to masonry Code (mm) (mm)
Qty
Bags
HM35075P 75 3.5 50
For light to medium duty applications with a Boxes

countersunk head for a concealed finish. HM35065 65 3.5 100
HM35075 75 3.5 100
HM35085 85 3.5 100
Qty HM350100 100 3.5 100
Code (mm) (mm)
Bags
HM25025P 25 2.5 50
HM25030P 30 2.5 50 WASHERED
HM25035P 35 2.5 50 For increased clamping
HM25040P 40 2.5 50
HM25050P 50 2.5 50
HM30060P 60 3.0 50
HM30065P 65 3.0 50
Boxes Code (mm) (mm)
Qty
HM25025 25 2.5 100
HM25030 30 2.5 100 Boxes
HM25035 35 2.5 100 WMN25 25 3.7 100
HM25040 40 2.5 100 WMN30 30 3.7 100
HM25050 50 2.5 100 WMN35 35 3.7 100
HM30040 40 3.0 100 WMN40 40 3.7 100
HM30050 50 3.0 100 WMN50 50 3.7 100
HM30060 60 3.0 100 WMN60 60 3.7 100
HM30065 65 3.0 100 WMN75 75 3.7 50
88
BUILDERS
METAL WORK
90 - MASONRY HANGERS 96 - FRAMING ANCHORS 98 - INSULATION CLIPS
90 - MF HANGERS 96 - NAIL PLATES 99 - WALL STARTER KITS
90 - TIMBER HANGERS 97 - FRAME CRAMPS 99 - ARRIS RAIL BRACKETS
92 - RESTRAINT STRAPS 97 - FIXING BANDS 99 - FENCE CLIPS
95 - ANGLED BRACKETS 98 - WINDOW BOARD TIES 100 - CONNECTORS & BRACES
95 - TRUSS CLIPS 98 - WALL TIES 102 - SHIMS & PACKERS
BUILDERS METAL WORK MASONRY JOIST HANGERS
MASONRY HANGERS
For masonry to timber applications
Available in: Galv. A2/Aust. SS To BS

EN ISO
14592:2
008
Supports timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake
out existing brickwork. Manufactured from pre-galvansied steel to give high level of corrosion resistance.
For ultimate corrosion resistance use stainless steel
SINGLE PIECE - Galv. Product W H B Joist Size

Code (mm) (mm) (mm) W x H (mm)
Hangers 140mm and
above are manufactured Singles
10mm less than the joist 47100MH 47 100 80 47 x 100
to allow for notching and 47125MH 47 125 80 47 x 125
regularised timber. 47147MH 47 150 80 47 x 150
47175MH 47 17 5 75 47 x 175
H 47200MH 47 200 75 47 x 200
47225MH 47 225 75 47 x 225
B
W
WELDED - Galv. A2/Aust. SS Product W H B Joist Size

Code (mm) (mm) (mm) W x H (mm)
Hangers 140mm and
above are manufactured Singles (Galvanised Steel)
10mm less than the joist 75150WMH 75 140 80 75 x 150
to allow for notching and 75175WMH 75 165 80 75 x 175
regularised timber. 75200WMH 75 190 80 75 x 200
75225WMH 75 215 80 75 x 225
H 90150WMH 90 140 80 90 x 150
90175WMH 90 165 80 90 x 175
90200WMH 90 190 80 90 x 200
90225WMH 90 215 80 90 x 225
100150WMH 100 140 75 100 x 150
100175WMH 100 165 75 100 x 175
100200WMH 100 190 75 100 x 200
B 100225WMH 100 215 75 100 x 225
W
150200WMH 150 190 90 150 x 200
150225WMH 150 215 90 150 x 225
Singles (Stainless Steel)

47100WMHS 47 100 80 47 x 100
47150WMHS 47 140 80 47 x 140
47175WMHS 47 165 80 47 x 165
47200WMHS 47 190 80 47 x 190
47225WMHS 47 215 80 47 x 215
100150WMHS 100 140 80 100 x 140
100175WMHS 100 165 80 100 x 165
100200WMHS 100 190 80 100 x 190
100225WMHS 100 215 80 100 x 215
90
MULTI-FUNCTIONAL / TIMBER HANGERS BUILDERS METAL WORK
MULTI-FUNCTIONAL HANGERS
For timber to timber applications
Available in: Galv.
For medium to heavy duty timber to timber applications. Designed for use with different fixings to give greater
flexibility and improved performance. Overall length refers to the length of the hanger when flat.
MULTI-FUNCTIONAL HANGERS
Overall
Location tabs aid fast accurate alignment Product W H B
Length
of the hanger. Code (mm) (mm) (mm)
(mm)
Singles
47240MMFH 47 97 85 240
47346MFH 47 150 85 346
47404MFH 47 179 85 404
47504MFH 47 229 85 504
76346MFH 76 165 85 346
76404MFH 76 164 85 404
H
76504MFH 76 214 85 504
90504MFH 90 207 85 504
100346MFH 100 123 85 346
100404MFH 100 152 85 404
100504MFH 100 202 85 504
B 150404MFH 150 127 85 404
150504MFH 150 177 85 504
W
MINI TIMBER HANGERS

Timber to timber joist hangers, suitable for light duty applications such as ceiling joists, decking and trimmers.
MINI TIMBER HANGER

Tag on base of the hanger
helps avoid rotation and aids fast, Product W H B Joist Size
accurate location. Code (mm) (mm) (mm) W x H (mm)
The tag can easily
be bent if not Singles (Galvanised Steel)
44THM 44 68 50 44 x 75-100
required.
47THM 47 67 50 47 x 75-100
H
B 44THMS 44 97 50 44 x 100 to 150
47THMS 47 96 50 47 x 100 to 150
W
91
BUILDERS METAL WORK TIMBER HANGERS
TIMBER HANGERS
For various timber to timber connections such as roof trusses, rafters and joists. Manufactured from Pre-Galvanised
steel to give a high level of corrosion resistance. For ultimate corrosion resistance use stainless steel.
STANDARD - Galv. A2/Aust. SS Product W L B Joist Size

Increased leg lengths, all
widths can take up to a Singles (Galvanised Steel)
225mm deep joist. 125TH 125 300 50 125 x 100 to 225
150TH 150 300 50 150 x 100 to 225
L Singles (Stainless Steel)

47THS 47 275 50 47 x 100 to 225
76THS 76 300 50 76 x 100 to 225
100THS 100 300 50 100 x 100 to 225
B
W
NO TAG - Galv. Product W L B Joist Size

Superior design allows the
use of fewer nails for faster Singles
installation. Increased leg 44TH 44 306 60 44 x 125 to 220
lengths, all widths can take 47TH 47 305 60 47 x 125 to 220
up to 225mm deep joist. 63TH 63 297 60 63 x 125 to 220
75TH 75 291 60 75 x 125 to 220
L 90TH 90 283 60 90 x 125 to 220
100TH 100 278 60 100 x 125 to 220
B
W
LONG LEG - Galv.
Increased leg lengths, all widths Product B

W L Joist Size
can take up to a 225mm Code (mm) (mm) (mm) (mm)
deep joist. Perfect for loft
conversions where the hanger Singles
extends below the support. 44450LTH 44 453 50 44 x 150 to 250
47450LTH 47 445 50 47 x 150 to 250
L 76450LTH 76 435 50 76 x 175 to 250
90450LTH 90 425 50 90 x 150 to 250
100450LTH 100 420 50 100 x 150 to 250
125450LTH 125 450 50 125 x 175 to 250
150450LTH 150 450 50 150 x 175 to 250
B
W
92
TIMBER HANGERS BUILDERS METAL WORK
HEAVY RESTRAINT STRAPS

Joins joists & rafters to masonry

EN ISO
14592:2
008
Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Manufactured from
Galvanised steel. For ultimate corrosion resistance use stainless steel.
HEAVY ENGINEERED - Galv. Product Length Bend Overall Thickness

Code (mm) (mm) Length (mm) (mm)
One design for both horizontal and vertical
applications. Lightweight design makes it Singles
easy to handle. 600ERS 500 100 600 1.4
800ERS 700 100 800 1.4
1000ERS 900 100 1000 1.4
1200ERS 1100 100 1200 1.4
1600ERS 1500 100 1600 1.4
BENT HEAVY DUTY - Galv. A2/Aust. SS Product Length Bend Overall Thickness
Usually used as a lateral restraint.
Singles (Galvanised Steel)
600BRSH 500 100 600 4.0
800BRSH 700 100 800 4.0
1000BRSH 900 100 1,000 4.0
1200BRSH 1100 100 1,200 4.0
1500BRSH 1400 100 1,500 4.0
1600BRSH 1450 100 1,600 4.0

1000BRSHS 900 100 1,000 4.0
1200BRSHS 1100 100 1,200 4.0
FLAT HEAVY DUTY - Galv. Product Length Bend Overall Thickness

Singles
1000FRSH - - 1000 4.0
TWISTED HEAVY DUTY - Galv. Product Length Twist Overall Thickness

Singles
600TRSH 500 100 600 4.0
1000TRSH 900 100 1,000 4.0
93
BUILDERS METAL WORK LIGHT RESTRAINT STRAPS
LIGHT RESTRAINT STRAPS

Joins joists & rafters to masonry
To BS
EN ISO
14592:2
008
Light duty straps are generally for vertical applications such as holding down wallplates. (When used as a vertical
restraint to hold down a wallplate, use a minimum length of 900mm) Available in galvanised steel, for ultimate
corrosion resistance use stainless steel.
BENT LIGHT DUTY - Galv. A2/Aust. SS Product Length Bend Overall Thickness
Increased leg lengths, all widths can take up to a
225mm deep joist. Singles (Galvanised Steel)
300BRSL 200 100 300 2.4
600BRSL 500 100 600 2.4
800BRSL 700 100 800 2.4
1000BRSL 900 100 1000 2.4
1200BRSL 1100 100 1200 2.4

1000BRSLS 800 100 1000 2.4
FLAT LIGHT DUTY - Galv. A2/Aust. SS Product Length Bend Overall Thickness
225mm deep joist. Singles (Galvanised Steel)
1000FRSL - - 1000 2.4

1000FRSLS - - 1000 2.4
TWISTED LIGHT DUTY - Galv. Product Length Twist Overall Thickness

225mm deep joist. Singles
1000TRSL 900 100 1000 2.4
94
ANGLED BRACKETS & TRUSS CLIPS BUILDERS METAL WORK
ANGLE BRACKETS
Fixes joists & rafters together
A versatile and general purpose 900 bracket used to strengthen timber joints. Available in galvanised steel,
for ultimate corrosion resistance use stainless steel.
Product Width Leg Thickness

Code (mm) (mm) (mm)
Heavy duty brackets with strengthening ribs on bend
to give added rigidity Singles (Galvanised Steel)
5050AB 62 50 x 50 2.4
6040AB 62 60 x 40 2.4
9090AB 62 90 x 90 2.4
15090AB 62 150 x 90 2.4
150150AB 62 150 x 150 2.4

6040ABS 62 60 x 40 2.4
9090ABS 62 90 x 90 2.4
TRUSS CLIPS
For fixing joists, girders & rafters
Available in: Galv.
For fixing trusses, girders and rafters to wallplate. Can also be used for general applications as a multi-purpose
connector to provide restraint whenever two timber members cross.
Product Width Thickness Height

Code (mm) (mm) (mm)
Installation prongs help
aid location of the joist Singles
and rafters easier. 47TC 47 1.0 150
95
BUILDERS METAL WORK UNIVERSAL FRAMING ANCHOR & PLATES
UNIVERSAL FRAMING ANCHOR

Available in: Galv.
An economical method of providing a strong joint for the construction of timber frames. The unique bending
slot allows instant and accurate on-site bending for all 2 and 3 way ties. The reversible design is ideal for a variety
of connections.
Product Width Height

Code (mm) (mm)
Singles
UFA 40 x 40 124
NAIL PLATES
To BS
EN ISO
14592:2
008
A versatile perforated plate used for connecting or repairing timber.
Product Width Thickness Length

Code (mm) (mm) (mm)
Strengthening ribs for added rigidity.
All holes are pressed countersunk Singles (Galvanised Steel)
to aid location of the nail 42NP 42 1.0 178
and to give a 85NP 85 1.0 178
flush finish. 104NP 104 1.0 154
169NP 169 1.0 178
178NP 178 1.0 338

85NPS 85 1.0 178
96
FRAME CRAMPS & FIXING BANDS BUILDERS METAL WORK
FRAME CRAMPS
For fixing frames to masonry

EN ISO
14592:2
008
Traditionally used for securing timber windows and door frames into masonry. They can also be used for
restraining masonry to new and existing structures in non structural applications.
HEAVY DUTY FISHTAILED FRAME CRAMPS - Galv.
Two 6mm holes and one

8mm hole. Galvanised
Product W Projection Bend Thickness
after manufacture for Code (mm) Length (mm) (mm) (mm)
superior corrosion
resistance. Singles
100FFC 25 100 50 2.3
150FFC 25 100 50 2.3
200FFC 25 100 50 2.3
SAFETY FRAME CRAMPS - A2/Aust. SS Product W Projection Bend Thickness

Code (mm) length (mm) (mm) (mm)
Two 6mm holes and one 8mm hole.
In stainless steel for maximum Singles
corrosion resistance. 100SFCS 19 100 50 2.0
150SFCS 19 150 50 2.0
200SFCS 19 200 50 2.0
FIXING BANDS
Perfect for suspending pipework
A versatile perforated metal strip which can easily be

cut or bent to provide a quick and reliable light weight
brace suitable for suspending pipework, cables and
doing general repairs.
Product Width Length
Code (mm) (m)
Multiple hole sizes to add to Singles (Galvanised Steel)

its versatility. Four different 2010FB 20 10
hole sizes ( 3.75 round,
M10 round, M6 Singles (Stainless Steel)
and M8 Square) 2010FBS 20 10
97
BUILDERS METAL WORK TIES & RETAINING CLIPS
WINDOW BOARD TIES

Masonry to window board
Available in: Galv.
A simple solution to tie

window boards to Product Width Length
masonry. Code (mm) (mm)
Singles
WBT 12 147
WALL TIES
Available in: A2/Aust. SS To BS

EN ISO
14592:2
008
LIGHT DUTY TYPE 4 WALL TIES Product Length x Cavity Max

Qty
Code Gauge (mm) Width (mm) Height (m)
Tangle free design, perfect for masonry cavity walls in
box form for domestic dwellings of up to two storeys Bundles
or a maximum 10m in height. 200WT4 200 x 2.3 50 to 75 10 250
225WT4 225 x 2.3 76 to 100 10 250
250WT4 250 x 2.3 101 to 125 10 250
GENERAL DUTY TYPE 2 WALL TIES Product Length x Cavity Max

Qty
Code Gauge (mm) Width (mm) Height (m)
Tangle free design, perfect for masonry cavity walls in
domestic houses and small commercial buildings of up Bundles
to three storeys and maximum 15m in height. 225WT2 225 x 3 76 to 100 15 250
250WT2 250 x 3 101 to 125 15 250
INSULATION RETAINING CLIPS

Used with a cavity wall
tie to hold insulation
material against the
inner wall of
the cavity.
Product Width Diameter
Qty
Code (mm) (mm)
Bags
IC Universal 80 250
98
WALL STARTER KITS & ARRIS BRACKETS BUILDERS METAL WORK
WALL STARTER KITS

Joins new walls to existing masonry
Available in: 430 Ferritic Stainless Steel
A stainless steel system, designed to join new walls

to existing masonry, suitable for both internal and
external brick or block walls.
Product Width Length Kit Length (2 x

Code (mm) (mm) Profiles) (mm)
Kit includes, x2 wall rails,
x5 plugs / coach screws / washers Singles
x10 wall rail connectors WSS 41 1200 2400
ARRIS RAIL BRACKETS

For fixing fences to timber posts
Available in: Galv.
Ideal for installing and repairing fences with Product Width Length Thickness
timber posts. Code (mm) (mm) (mm)
Singles
300ARS 62 x 62 300 0.7
FENCING CLIPS
Available in: Galv.
A quick and easy way to

secure fence panels and
trellis to timber posts or
plugged and screwed Product Width
into masonry. Code (mm)
Singles
FC44 44
FC51 51
99
BUILDERS METAL WORK CONNECTORS & BRACES
CONNECTORS & BRACES

For joining and strengthening applications
Available in: Zinc (CR3) Galv. Brass
Very versatile and multi-use products, they are commonly used in kitchen fitting, furniture repairs, carpentry and
joinery. These plates may also be used in many other applications where joining or strengthening is required.
ANGLE BRACES - Zinc (CR3) Product Size (mm) Thickness

Qty
Code HxLxW (mm)
Perfect for strengthening
draws and kitchen fitting. Boxes
19ABR 19 x 19 x19 1.0 1,000
H Packs
19ABRP 19 x 19 x 19 1.0 10
L
W
CORNER BRACES - Zinc (CR3) Product Size (mm) Thickness

Qty
Code HxLxW (mm)
25CBR 25 x 25 x 16 1.6 50
Countersunk holes for a flush
38CBR 38 x 38 x 16 1.6 50
finish.
50CBR 50 x 50 x 16 1.6 50
H 65CBR 65 x 65 x 16 1.7 50
75CBR 75 x 75 x 16 1.7 50
100CBR 100 x 100 x 22 2.3 25
Packs
25CBRP 25 x 25 x 16 1.6 4
38CBRP 38 x 38 x 16 1.6 4
50CBRP 50 x 50 x 16 1.6 4
65CBRP 65 x 65 x 16 1.7 4
L 75CBRP 75 x 75 x 16 1.7 4
100CBRP 100 x 100 x 22 2.3 2
W
MENDING PLATES - Zinc (CR3) Product Size L x W Thickness

Code (mm) (mm) Qty
Perfect for strengthening and
W
repairing. Countersunk holes Boxes

75MPL 75 x 16 1.85 50
for a flush finish.
100MPL 100 x 16 2.0 50
Packs
75MPLP 75 x 16 1.85 4
L
100MPLP 100 x 16 2.0 4
100
CONNECTORS & BRACES BUILDERS METAL WORK
CORNER PLATES - Zinc (CR3) Product Size (mm) Thickness

Qty
Code WxLxA (mm)
A
50CPL 50 x 50 x 13 1.5 50
for a flush finish.
W
75CPL 75 x 75 x16 1.5 50
Packs
50CPLP 50 x 50 x 13 1.5 4
75CPLP 75 x 75 x16 1.5 4
L
A
TEE PLATES - Zinc (CR3) Product Size (mm) Thickness

Qty
Code WxLxAxA (mm)
for a flush finish. 76TPL 76 x 76 x 16 x 16 2.0 25
W
L
Packs
76TPLP 76 x 76 x 16 x 16 2.0 2
A
A
STRETCHER PLATES - Zinc (CR3) Product Size (mm) Thickness

Qty
Code LxWxH (mm)
38SPL 38 x 25 x 29 1.8 100
H Packs
38SPLP 38 x 25 x 29 1.8 4
L W
MIRROR PLATES - Brass Product Size

Type Qty
Code (mm)
For mounting
mirrors onto walls. Packs
Slotted and plain PMP32P 32 Plain 1
available. PMP38P 38 Plain 1
SMP32P 32 Slotted 1
SMP38P 38 Slotted 1
DOUBLE SIDED TIMBER Product Size Bore

Qty
Code (mm) (mm)
CONNECTORS - Galv.
Boxes
TCD50 50 M12 100
Designed to increase the
joint strength when
Bags
TCD50B 50 M12 15
bolting two pieces of
timber together. Packs
TCD50P 50 M12 6
101
BUILDERS METAL WORK SHIMS, PACKERS & INTERLOCKING WEDGES
SHIMS, PACKERS & INTERLOCKING WEDGES

Available in: Nylon
SHIMS - PACKERS -
A solution for multiple applications, used to ensure

Used for easy and quick levelling of battens, dry lining correct weight distribution of glazed units and increase
systems, stud work, door and window frames. security around fixing points during frame fitting.
• Polypropylene material • Polypropylene material
• Resistant to weather changes • Resistant to weather changes
• Waterproof • Waterproof
• Bag and tub includes two sizes • Strong and durable
Product Size Thickness Product Size Thickness

Colour Qty Colour Qty
Mixed Tub Mixed Tub

45 x 35 1 Yellow 40 100 x 28 1 Green 60
45 x 35 2 Green 40 100 x 28 2 Black 80
45 x 35 3 Blue 40 PACKERTUB 100 x 28 3 White 100
45 x 35 4 Red 40 100 x 28 4 Grey 40
45 x 35 5 Brown 20 100 x 28 5 Blue 40
SHIMTUB 45 x 35 6 Black 20 100 x 28 6 Red 80
100 x 50 1 Yellow 40 Mixed Bag
100 x 50 2 Green 40 100 x 28 1 Green 30
100 x 50 3 Blue 40 100 x 28 2 Black 40
100 x 50 4 Red 40 PACKER 100 x 28 3 White 50
100 x 50 5 Brown 20
100 x 28 4 Grey 20
100 x 50 6 Black 20
100 x 28 5 Blue 20
Mixed Bag 100 x 28 6 Red 40
45 x 35 1 Yellow 20
45 x 35 2 Green 20
Bags
P1GREEN 100 x 28 1 Green 200
45 x 35 3 Blue 20
P2BLACK 100 x 28 2 Black 200
45 x 35 4 Red 20
P3WHITE 100 x 28 3 White 200
45 x 35 5 Brown 10
P4GREY 100 x 28 4 Grey 200
SHIM 45 x 35 6 Black 10
P5BLUE 100 x 28 5 Blue 200
100 x 50 1 Yellow 20
P6RED 100 x 28 6 Red 200
100 x 50 2 Green 20
100 x 50 3 Blue 20
100 x 50 4 Red 20
100 x 50 5 Brown 10
100 x 50 6 Black 10
INTERLOCKING WEDGES -
The wedges provide
a support block of Product Size Thickness
Colour Qty
consistent dimensions Code (mm) (mm)
and allow adjustment
for levelling and
Bags
PIW810 80 x 30 x 10 1 Black 200
aligning various
PIW915 90 x 45 x 15 2 Black 200
building components.
102
DRILLING
104 - SDS PLUS HAMMER BITS 109 - DIAMOND DRILL BITS 116 - STUB DRILLS
105 - SDS PLUS STEELS 110 - BRAD POINT BITS 117 - BROACHING CUTTERS
106 - SDS REBAR CUTTERS 110 - HEX FLAT WOOD BITS 118 - COUNTERSINKS
107 - SDS MAX HAMMER BITS 110 - HINGE CUTTERS 119 - WIRE BRUSHES
107 - SDS MAX STEELS 111 - AUGER BITS 123 - CHUCKS & ADAPTORS
108 - DRILL BITS 112 - JOBBER DRILLS 125 - DRILL SETS
109 - TILE AND GLASS BITS 116 - BLACKSMITH DRILLS
DRILLING SDS PLUS HAMMER BITS
PROFESSIONAL SDS PLUS Materials
HAMMER BITS
A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM
approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry.
Product Drill Ø Working Total Product Drill Ø Working Total

Code (mm) Length (mm) Length (mm) Code (mm) Length (mm) Length (mm)
Singles Singles
AP4110 4.0 50 110 AP12450 12.0 400 450
AP4160 4.0 100 160 AP12600 12.0 550 600
AP5110 5.0 50 110 AP121000 12.0 950 1000
AP5160 5.0 100 160 AP13260 13.0 200 260
AP5210 5.0 150 210 AP14160 14.0 100 160
AP55110 5.5 50 110 AP14210 14.0 150 210
AP55160 5.5 100 160 AP14260 14.0 200 260
AP55210 5.5 150 210 AP14310 14.0 250 310
AP6110 6.0 50 110 AP14450 14.0 400 450
AP6160 6.0 100 160 AP141000 14.0 950 1000
AP6210 6.0 150 210 AP15260 15..0 182 260
AP6260 6.0 200 260 AP16160 16.0 100 160
AP6350 6.0 290 350 AP16210 16.0 150 210
AP65110 6.5 50 110 AP16260 16.0 182 260
AP65160 6.5 100 160 AP16310 16.0 232 310
AP65210 6.5 150 210 AP16450 16.0 400 450
AP65260 6.5 200 260 AP16600 16.0 550 600
AP7110 7.0 50 110 AP161000 16.0 950 1000
AP7160 7.0 100 160 AP18210 18.0 150 210
AP7210 7.0 150 210 AP18260 18.0 200 260
AP7260 7.0 200 260 AP18310 18.0 228 310
AP8110 8.0 50 110 AP18450 18.0 400 450
AP8160 8.0 100 160 AP20210 20.0 132 210
AP8210 8.0 150 210 AP20310 20.0 228 310
AP8260 8.0 200 260 AP20450 20.0 400 450
AP8310 8.0 250 310 AP20600 20.0 550 600
AP8350 8.0 300 350 AP201000 20.0 950 1000
AP8450 8.0 400 450 AP22260 22.0 180 260
AP9210 9.0 150 210 AP22450 22.0 400 450
AP10160 10.0 100 160 AP22600 22.0 550 600
AP10210 10.0 150 210 AP24260 24.0 180 260
AP10260 10.0 200 260 AP24450 24.0 400 450
AP10310 10.0 250 310 AP25260 25.0 180 260
AP10450 10.0 400 450 AP25450 25.0 400 450
AP10600 10.0 550 600 AP25600 25.0 550 600
AP101000 10.0 950 1000 AP251000 25.0 950 1000
AP12160 12.0 100 160 AP28450 28.0 400 450
AP12210 12.0 150 210 AP30450 30.0 400 450
AP12260 12.0 200 260
AP12310 12.0 250 310
104
SDS PLUS HAMMER BITS DRILLING
TRADESMAN SDS PLUS Materials
HAMMER BITS
A cost effective drill bit with a tungsten carbide tip to give durability and precision when used in concrete and masonry.

Singles Singles
SDS4160 4.0 100 160 SDS18310 18.0 250 300
SDS5110 5.0 50 110 SDS18450 18.0 400 450
SDS5160 5.0 100 160 SDS20210 20.0 150 200
SDS5210 5.0 150 210 SDS20310 20.0 250 300
SDS55110 5.5 50 110 SDS20450 20.0 400 450
SDS55160 5.5 100 160 SDS20600 20.0 550 600
SDS55210 5.5 150 210 SDS22260 22.0 200 250
SDS6110 6.0 50 110 SDS22450 22.0 400 450
SDS6160 6.0 100 160 SDS25450 25.0 400 450
SDS6210 6.0 150 210
SDS6260 6.0 200 260
SDS65110 6.5 50 110
SDS65160 6.5 100 160
SDS65210 6.5 150 210
SDS65260 6.5 200 260 SDS PLUS STEELS
SDS7110 7.0 50 110
SDS7160 7.0 100 160
SDS7210 7.0 150 210
SDS8110 8.0 50 110
SDS8160 8.0 100 160
SDS8210 8.0 150 210
SDS8260 8.0 200 260
SDS8310 8.0 250 310
SDS8450 8.0 400 450
SDS10160 10.0 100 160
SDS10210 10.0 150 210
SDS10260 10.0 200 260 POINT TILE SPADE/CHISEL GOUGE
SDS10310 10.0 250 310
SDS10450 10.0 400 450 NOT TO BE USED IN ROTARY MODE.
SDS10600 10.0 550 600
SDS12160 12.0 100 160
POINT - Breaks up concrete and masonry.
SDS12210 12.0 150 210
SDS12260 12.0 200 260 TILE - Angled head design for easy removal of tiles,
SDS12310 12.0 250 310 plaster or rendering.
SDS12450 12.0 400 450
SDS12600 12.0 550 600 CHISEL \ SPADE - Breaks up concrete and masonry.
SDS14160 14.0 100 160 Also removes plaster or rendering.
SDS14210 14.0 150 210 GOUGE - Removes mortar from brickwork prior to
SDS14260 14.0 200 260 re-pointing.
SDS14310 14.0 250 310
SDS14450 14.0 400 450
SDS14600 14.0 550 600 Product Width Total
Description
SDS16160 16.0 100 160 Code (mm) Length (mm)
SDS16210 16.0 150 210
SDS16260 16.0 200 250 Singles
SDS16310 16.0 250 300 SDSP Point N/A 250
SDS16450 16.0 400 450 SDSC Chisel 20 250
SDS16600 16.0 550 600 SDSS Spade 40 250
SDS18210 18.0 150 200 SDSG Gouge 22 250
SDS18260 18.0 200 260 SDST Tile 40 250
105
DRILLING SDS REBAR CUTTERS
SDS SHANK REBAR CUTTERS Materials
Used to drill through in-situ rebar when drilling into concrete.

USE ROTARY MODE ONLY.
Rotary rebar cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling
with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the
recommended R.P.M’S.
SHANK REBAR CUTTER HEAD ONLY

Used to drill through in-situ rebar when drilling into Used with rebar adaptor to drill through in-situ rebar
concrete. USE ROTARY MODE ONLY. when drilling into concrete. USE ROTARY MODE ONLY.
How to Guide
Working Total
Product Drill Ø Rec.
Length Length
Working Total Code (mm) RPM
Product Drill Ø Rec. (mm) (mm)
Length Length
Code (mm) RPM
(mm) (mm) Singles
Singles MRB22HO 22.0 110 260 460-600
MSRB10* 10.0 250 300 750-1000 MRB24HO 24.0 110 260 350-500
MSRB12* 12.0 250 300 600-850 MRB25HO 25.0 110 260 350-500
MSRB14* 14.0 250 300 600-850 MRB26HO 26.0 110 260 350-500
MSRB15* 15.0 250 300 600-850
MSRB16 16.0 250 300 500-750
MSRB18 18.0 250 300 500-750
MSRB20 20.0 250 300 460-600
* Products are not vented. ADAPTOR FOR CUTTER HEADS

Used with 22mm and above rebar cutter heads.
USE ROTARY MODE ONLY.
Product Drill Ø Working Total

Code (mm) Length (mm) Length (mm)
Singles
STDS212 - 220 260
106
SDS MAX HAMMER BITS DRILLING
SDS MAX HAMMER BITS Materials
SDS Max is an alternative system to the SDS Plus. Used mainly to drill dense
materials or where there is heavy usage.

Singles Singles
SDSM12340 12 195 340 SDSM20540 20 395 540
SDSM12540 12 395 540 SDSM20690 20 545 690
SDSM14340 14 195 340 SDSM20920 20 775 920
SDSM14540 14 395 540 SDSM24340 24 195 340
SDSM16340 16 195 340 SDSM25340 25 195 340
SDSM16540 16 395 540 SDSM25540 25 395 540
SDSM18340 18 195 340 SDSM25690 25 545 690
SDSM18540 18 395 540 SDSM26340 26 195 340
SDSM18690 18 545 690 SDSM26540 26 395 540
SDSM18920 18 775 920 SDSM32340 32 195 340
SDSM20340 20 195 340 SDSM32540 32 395 540
SDS MAX STEELS Materials
A range of tools designed for use in rotation stop

hammers with the larger SDS Max tool holder system.
NOT TO BE USED IN ROTARY MODE.
POINT - Breaks up concrete and masonry.

CHISEL - Breaks up concrete and masonry, removes
plaster or rendering.
SLOTTING TOOL - Removes mortar from brickwork
prior to re-pointing.
POINT CHISEL SLOTTING
Product Width Total

Description
Code (mm) Length (mm)
Singles
SDSMP280 Point N/A 280
SDSMP400 Point N/A 400
SDSMC280 Chisel 25 280
SDSMC400 Chisel 25 400
SDSMC40050 Wide Chisel 50 400
SDSMC30075 Extra Wide Chisel 75 300
SDSMST Slotting Tool 25 280
107
DRILLING MULTI-PURPOSE / MASONRY DRILL BITS
TCT MULTI-PURPOSE DRILL BITS Materials
Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling
even in hard materials. USE ON ROTARY ONLY.

Singles Singles
MP475 4.0 40 75 MP6150 6.0 87 150
MP4150 4.0 87 150 MP65100 6.5 58 100
MP585 5.0 55 85 MP65150 6.5 87 150
MP5150 5.0 87 150 MP7100 7.0 58 100
MP55100 5.5 58 100 MP7150 7.0 87 150
MP55150 5.5 87 150 MP8150 8.0 87 150
MP6100 6.0 58 100 MP10150 10.0 87 150
MASONRY DRILL BITS Materials
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action.

Singles Singles
APM475 4.0 40 75 APM10120 10.0 75 120
APM4150 4.0 87 150 APM10150 10.0 87 150
APM585 5.0 47 85 APM10200 10.0 120 200
APM5150 5.0 87 150 APM10300 10.0 220 300
APM5585 5.5 47 85 APM10400 10.0 300 400
APM55150 5.5 87 150 APM12150 12.0 90 150
APM6100 6.0 58 100 APM12200 12.0 127 200
APM6150 6.0 87 150 APM12300 12.0 220 300
APM6200 6.0 120 200 APM12400 12.0 300 400
APM6300 6.0 220 300 APM14150 14.0 90 150
APM65100 6.5 58 100 APM14200 14.0 127 200
APM65150 6.5 87 150 APM14400 14.0 300 400
APM65200 6.5 120 200 APM16150 16.0 90 150
APM65300 6.5 220 300 APM16200 16.0 127 200
APM7100 7.0 58 100 APM16300 16.0 220 300
APM7150 7.0 87 150 APM16400 16.0 300 400
APM7300 7.0 220 300 APM20200 20.0 152 200
APM8120 8.0 75 120 APM20400 20.0 300 400
APM8150 8.0 87 150 APM25400 25.0 300 400
APM8200 8.0 120 200
APM8300 8.0 220 300
108
GLASS & DIAMOND DRILL BITS DRILLING
TCT TILE & GLASS BITS Materials
For accurate drilling of glass and ceramics. A lubricant such as water or turpentine is recommended when drilling glass.
USE AT LOW R.P.M IN ROTARY MODE ONLY.
Product Drill Ø Working

Code (mm) Length (mm)
Singles
TG5 5.0 60
TG6 6.0 60
TG65 6.5 75
TG7 7.0 75
TG8 8.0 75
TG10 10.0 80
DIAMOND DRILL BITS Materials
DRY WET
Ideal for drilling a clean hole into hard materials such as Used to drill an accurate hole into hard materials such
ceramics, porcelain, marble and slate. as ceramics, porcelain, marble and slate. Use wet.
How to Guide How to Guide
Product Drill Ø Working Product Drill Ø Working

Code (mm) Length (mm) Code (mm) Length (mm)
Singles Singles
VBD5 5 65 DD5 5 65
VBD6 6 65 DD6 6 65
VBD7 7 80 DD7 7 65
VBD8 8 80 DD8 8 65
VBD10 10 80 DD10 10 65
VBD12 12 80 DD12 12 65
VBD15 15 80 DD20 20 65
VBD20 20 80 DD25 25 65
VBD25 25 80 DD115 115 65
109
DRILLING BRAD POINT & FLAT WOOD BITS
HSS BRAD POINT WOOD HEXAGONAL SHANK FLAT

BITS WOOD BITS
Materials Materials
For drilling small diameter holes into various types of The twin cutting edges and integral centre point
timber and man-made boards. enhances speed and provides rapid chip removal
when drilling various types of timber and man-made
Product Working Total
boards.
Drill Ø
Singles Product Drill Ø Total

BP3 3.0 33 60 Code (mm) Length (mm)
BP4 4.0 43 75
BP5 5.0 52 87
Singles
BP6 6.0 57 92 FB6 6.0 152
BP7 7.0 69 108 FB8 8.0 152
BP8 8.0 75 118 FB10 10.0 152
BP10 10.0 87 133 FB12 12.0 152
FB13 13.0 152
FB14 14.0 152
FB16 16.0 152
FB18 18.0 152
FB19 19.0 152
FB20 20.0 152
TCT HINGE CUTTERS FB22

FB24
22.0
24.0
152
152
FB25 25.0 152
FB26 26.0 152
FB28 28.0 152
FB30 30.0 152
FB32 32.0 152
FB35 35.0 152
FB38 38.0 152
Materials
1/4” EXTENSION RODS
Superb quality, heavy duty tungsten carbide-tipped

hinge drill with centre point and outer spurs. Designed
to drill 35mm holes for concealed hinges. 1/4” extension rods to be used where there is restrictive
access and in conjunction with a ¼” shank Flat Wood
Product Drill Ø Overall Shank Ø Bit, (Allen key provided).
Code (mm) Length (mm) (mm)
Singles Product Drill Ø

Length
35HC 35 60 12.7 Code (mm)
FBEQR150 6.35 Q/R 150

FBEQR300 6.35 Q/R 300
110
AUGER BITS DRILLING
WOOD AUGER BITS Materials
A high performance wood drill for drilling deep holes into various types of timber. Available with Hex or SDS Plus shank.
HEX SHANK Product Drill Ø Working Total

Singles
HA24235 24.0 165 235
Singles HA25235 25.0 165 235
HA10100 10.0 55 100 HA26235 26.0 165 235
HA12100 12.0 55 100 HA28235 28.0 165 235
HA16100 16.0 55 100 HA30235 30.0 165 235
HA20100 20.0 55 100 HA32235 32.0 165 235
HA22100 22.0 55 100 HA8460 8.0 385 460
HA25100 25.0 55 100 HA10460 10.0 385 460
HA32100 32.0 55 100 HA12460 12.0 385 460
HA8155 8.0 90 155 HA14460 14.0 385 460
HA14155 14.0 90 155 HA16460 16.0 385 460
HA16155 16.0 90 155 HA18460 18.0 385 460
HA19155 19.0 90 155 HA20460 20.0 385 460
HA20155 20.0 90 155 HA22460 22.0 385 460
HA22155 22.0 90 155 HA26460 26.0 385 460
HA25155 25.0 90 155
HA28155 28.0 90 155
HA30155
HA32155
30.0
32.0
90
90
155
155
SDS PLUS SHANK
HA6235 6.0 165 235
HA8235 8.0 165 235 Code (mm) Length (mm) Length (mm)
HA10235 10.0 165 235
HA12235 12.0 165 235 Singles
HA13235 13.0 165 235 SA6200 6.0 100 200
HA14235 14.0 165 235 SA8200 8.0 100 200
HA16235 16.0 165 235 SA10235 10.0 160 235
HA18235 18.0 165 235 SA12235 12.0 160 235
HA19235 19.0 165 235 SA16235 16.0 160 235
HA20235 20.0 165 235 SA20235 20.0 160 235
HA22235 22.0 165 235 SA22235 22.0 160 235
SA25235 25.0 160 235
SPEED WOOD AUGER BITS Materials

Speed Augers with a four fluted cutter, Code (mm) Length (mm) Length (mm)
designed for rapid chip ejection and
cleaner hole drilling in timber. Singles
SPA16 16.0 80 159
* CARPENTERS KIT on page 126 SPA20 20.0 80 159
SPA25 25.0 80 159
111
DRILLING COBALT JOBBER DRILLS
COBALT JOBBER DRILLS Materials
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials.
The 135° split point prevents the bit from drifting.
Product Drill Ø Flute Total Pack Product Drill Ø Flute Total Pack
Code (mm) Length (mm) Length (mm) Qty Code (mm) Length (mm) Length (mm) Qty
Tubes Singles
HSSCO1 1.0 12 34 10 HSSCOR1 1.0 12 34 1
HSSCO15 1.5 18 40 10 HSSCOR15 1.5 18 40 1
HSSCO2 2.0 24 49 10 HSSCOR2 2.0 24 49 1
HSSCO25 2.5 30 57 10 HSSCOR25 2.5 30 57 1
HSSCO3 3.0 33 61 10 HSSCOR3 3.0 33 61 1
HSSCO32 3.2 36 65 10 HSSCOR32 3.2 36 65 1
HSSCO33 3.3 36 65 10 HSSCOR33 3.3 36 65 1
HSSCO35 3.5 39 70 10 HSSCOR35 3.5 39 70 1
HSSCO4 4.0 43 75 10 HSSCOR4 4.0 43 75 1
HSSCO42 4.2 43 75 10 HSSCOR42 4.2 43 75 1
HSSCO45 4.5 47 80 10 HSSCOR45 4.5 47 80 1
HSSCO48 4.8 52 86 10 HSSCOR48 4.8 52 86 1
HSSCO5 5.0 52 86 10 HSSCOR5 5.0 52 86 1
HSSCO55 5.5 57 93 10 HSSCOR55 5.5 57 93 1
HSSCO6 6.0 57 93 10 HSSCOR6 6.0 57 93 1
HSSCO65 6.5 63 101 10 HSSCOR65 6.5 63 101 1
HSSCO68 6.8 69 109 10 HSSCOR7 7.0 69 109 1
HSSCO7 7.0 69 109 10 HSSCOR75 7.5 69 109 1
HSSCO75 7.5 69 109 5 HSSCOR8 8.0 75 117 1
HSSCO8 8.0 75 117 5 HSSCOR85 8.5 75 117 1
HSSCO85 8.5 75 117 5 HSSCOR9 9.0 81 125 1
HSSCO9 9.0 81 125 5 HSSCOR95 9.5 81 125 1
HSSCO95 9.5 81 125 5 HSSCOR100 10.0 87 133 1
HSSCO100 10.0 87 133 5 HSSCOR105 10.5 87 133 1
HSSCO102 10.2 87 133 5 HSSCOR110 11.0 94 142 1
HSSCO105 10.5 87 133 5 HSSCOR115 11.5 94 142 1
HSSCO110 11.0 94 142 5 HSSCOR120 12.0 101 151 1
HSSCO115 11.5 94 142 5 HSSCOR125 12.5 101 151 1
HSSCO120 12.0 101 151 5 HSSCOR130 13.0 101 151 1
HSSCO125 12.5 101 151 5
HSSCO130 13.0 101 151 5
COBALT JOBBER
DRILL SET
Available in
19 or 25 piece sets
Product
Description
Code
HSSCO19DS 19pcs. 1-10mm (increments of 0.5mm)
HSSCO25DS 25pcs. 1-13mm (increments of 0.5mm)
112
M2 FULLY GROUND JOBBER DRILLS DRILLING
M2 FULLY GROUND JOBBER DRILLS Materials
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid
performance into all non-alloy materials. The 135° split point prevents the bit from drifting.
Tubes Singles
HSSG1 1.0 12 34 10 HSSGR8 8.0 75 117 1
HSSG15 1.5 18 40 10 HSSGR85 8.5 75 117 1
HSSG2 2.0 24 49 10 HSSGR9 9.0 81 125 1
HSSG24 2.4 30 57 10 HSSGR100 10.0 87 133 1
HSSG25 2.5 30 57 10 HSSGR110 11.0 94 142 1
HSSG3 3.0 33 61 10 HSSGR120 12.0 101 151 1
HSSG31 3.1 36 65 10 HSSGR130 13.0 101 151 1
HSSG32 3.2 36 65 10
HSSG33 3.3 36 65 10
HSSG35 3.5 39 70 10
HSSG36 3.6 39 70 10
IMPERIAL
HSSG38 3.8 43 75 10
Product Drill Ø Flute Total Pack
HSSG4 4.0 43 75 10
Code (Imp.) Length (Imp.) Length (Imp.) Qty
HSSG41 4.1 43 75 10
HSSG42 4.2 43 75 10
Tubes
HSSG45 4.5 47 80 10
HSIG116 1⁄16 7⁄8 17⁄8 10
HSSG48 4.8 52 86 10
HSIG132 1⁄32 ½ 13⁄8 10
HSSG49 4.9 52 86 10
HSIG364 3⁄64 ¾ 1¼ 10
HSSG5 5.0 52 86 10
HSIG564 5⁄64 1 2 10
HSSG51 5.1 52 86 10
HSIG332 3⁄32 1¼ 2¼ 10
HSSG53 5.3 52 86 10
HSIG764 7⁄64 1½ 25⁄8 10
HSSG55 5.5 57 93 10
HSIG18 1⁄8 15⁄8 2¾ 10
HSSG6 6.0 57 93 10
HSIG964 9⁄64 1¾ 27⁄8 10
HSSG64 6.4 63 101 10
HSIG532 5⁄32 2 21⁄8 10
HSSG65 6.5 63 101 10
HSIG316 3⁄16 25⁄16 3½ 10
HSSG68 6.8 69 109 10
HSIG1364 13⁄64 27⁄16 35⁄8 10
HSSG7 7.0 69 109 10
HSIG732 7⁄32 2½ 3¾ 10
HSSG75 7.5 69 109 5
HSIG14 ¼ 2¾ 4 10
HSSG8 8.0 75 117 5
HSIG516 5⁄16 33⁄16 4½ 5
HSSG85 8.5 75 117 5
HSIG2164 21⁄64 35⁄16 45⁄8 5
HSSG9 9.0 81 125 5
HSIG38 3⁄8 35⁄8 5 5
HSSG95 9.5 81 125 5
HSIG12 ½ 4½ 6 5
HSSG100 10.0 87 133 5
HSSG102 10.2 87 133 5
HSSG105 10.5 87 133 5
HSSG110 11.0 94 142 5
HSSG115 11.5 94 142 5
HSSG120 12.0 101 151 5 M2 JOBBER
HSSG125 12.5 101 151 5
HSSG130 13.0 101 151 5 DRILL SET
Singles Available in
HSSGR2 2.0 24 49 1
19 or 25 piece sets
HSSGR25 2.5 30 57 1
HSSGR3 3.0 33 61 1
HSSGR35 3.5 39 70 1
HSSGR4 4.0 43 75 1
HSSGR45 4.5 47 80 1
HSSGR5 5.0 52 86 1
HSSGR55 5.5 57 93 1 Product
Description
HSSGR6 6.0 57 93 1 Code
HSSGR65 6.5 63 101 1 HSSG19DS 19pcs. 1-10mm (increments of 0.5mm)
HSSGR7 7.0 69 109 1 HSSG25DS 25pcs. 1-13mm (increments of 0.5mm)
113
DRILLING ROLL FORGED JOBBER DRILLS
ROLL FORGED JOBBER DRILLS Materials
An economic HSS drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting.
Tubes Packs
HSSR1 1.0 12 34 10 HSSRR85 8.5 75 117 1
HSSR15 1.5 18 40 10 HSSRR9 9.0 81 125 1
HSSR2 2.0 24 49 10 HSSRR100 10.0 87 133 1
HSSR25 2.5 30 57 10 HSSRR110 11.0 94 142 1
HSSR3 3.0 33 61 10 HSSRR120 12.0 101 151 1
HSSR32 3.2 36 65 10 HSSRR130 13.0 101 151 1
HSSR33 3.3 36 65 10
HSSR35 3.5 39 70 10
HSSR36 3.6 39 70 10 IMPERIAL
HSSR4 4.0 43 75 10
HSSR42 4.2 43 75 10 Product Drill Ø Flute Total Pack
HSSR45 4.5 47 80 10 Code (Imp.) Length (Imp.) Length (Imp.) Qty
HSSR48 4.8 52 86 10
HSSR49 4.9 52 86 10 Tubes
HSSR5 5.0 52 86 10 HSIR116 1⁄16 7⁄8 17⁄8 10
HSSR52 5.2 52 86 10 HSIR564 5⁄64 1 2 10
HSSR55 5.5 57 93 10 HSIR332 3⁄32 1¼ 2¼ 10
HSSR6 6.0 57 93 10 HSIR764 7⁄64 1½ 25⁄8 10
HSSR65 6.5 63 101 10 HSIR18 1⁄8 15⁄8 2¾ 10
HSSR68 6.8 69 109 10 HSIR964 9⁄64 1¾ 27⁄8 10
HSSR7 7.0 69 109 10 HSIR532 5⁄32 2 31⁄8 10
HSSR72 7.2 69 109 5 HSIR1164 11⁄64 21⁄8 3¼ 10
HSSR75 7.5 69 109 5 HSIR316 3⁄16 25⁄16 3½ 10
HSSR8 8.0 75 109 5 HSIR732 7⁄32 2½ 3¾ 10
HSSR85 8.5 75 109 5 HSIR14 ¼ 2¾ 4 10
HSSR9 9.0 81 125 5 HSIR1764 17⁄64 27⁄8 41⁄8 10
HSSR95 9.5 81 125 5 HSIR516 5⁄16 33⁄16 4½ 10
HSSR96 9.6 87 133 5 HSIR38 3⁄8 35⁄8 5 10
HSSR100 10.0 87 133 5 HSIR12 ½ 4½ 6 10
HSSR102 10.2 87 133 5
HSSR105 10.5 87 133 5
HSSR110 11.0 94 142 5
HSSR115 11.5 94 142 5
HSSR120 12.0 101 151 5
HSSR125 12.5 101 151 5
HSSR130 13.0 101 151 5
ROLL FORGED
Packs JOBBER DRILL SET
HSSRR1 1.0 12 34 2
HSSRR15 1.5 18 40 2 Available in
HSSRR2 2.0 24 49 2 19, 25 or 170 piece sets
HSSRR25 2.5 30 57 2
HSSRR3 3.0 33 61 2
HSSRR33 3.3 36 65 2
HSSRR35 3.5 39 70 2
HSSRR4 4.0 43 75 2
HSSRR45 4.5 47 80 2 Product
Description
HSSRR5 5.0 52 86 2 Code
HSSRR55 5.5 57 93 2 HSSR19DS 19pcs. 1-10mm (increments of 0.5mm)
HSSRR6 6.0 57 93 2 HSSR25DS 25pcs. 1-13mm (increments of 0.5mm)
HSSRR65 6.5 63 101 1 HSSR170DS 170pcs.
HSSRR7 7.0 69 109 1 x10pcs.1-8mm (increments of 0.5mm)
HSSRR8 8.0 75 109 1 x5pcs. 8.5-10mm (increments of 0.5mm)
114
M2 FULLY GROUND LONG JOBBER DRILLS DRILLING
M2 FULLY GROUND LONG Materials
JOBBER DRILLS
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above
prevents ‘walking’ and enables faster penetration.
Tubes Singles
HSSGL2 2.0 56 85 10 HSSGLR3 3.0 66 100 1
HSSGL25 2.5 62 95 10 HSSGLR35 3.5 73 112 1
HSSGL3 3.0 66 100 10 HSSGLR4 4.0 78 119 1
HSSGL32 3.2 69 106 10 HSSGLR45 4.5 82 126 1
HSSGL35 3.5 73 112 10 HSSGLR5 5.0 87 132 1
HSSGL4 4.0 78 119 10 HSSGLR55 5.5 91 139 1
HSSGL42 4.2 78 119 10 HSSGLR6 6.0 91 139 1
HSSGL45 4.5 82 126 10 HSSGLR65 6.5 97 148 1
HSSGL48 4.8 87 132 10 HSSGLR7 7.0 102 156 1
HSSGL5 5.0 87 132 10 HSSGLR8 8.0 109 165 1
HSSGL55 5.5 91 139 10
HSSGL6 6.0 91 139 10
HSSGL65 6.5 97 148 10
HSSGL7 7.0 102 156 5
HSSGL8 8.0 109 165 5
HSSGL85 8.5 109 165 5
HSSGL9 9.0 115 175 5
HSSGL100 10.0 121 184 5
Driver Bits & Adaptors

IMPACT BITS TIMDRIVE HEX MAGNETIC
POZI SLOTTED NUT ADAPTORS
PHILLIPS SQUARE SETTERS
SEE PAGES
151 - 153
115
DRILLING BLACKSMITH & STUB DRILLS
BLACKSMITHS DRILLS Materials
performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2” chuck.
Product Drill Ø Flute Total

Singles
BS135 13.5 75 160
BS14 14.0 75 160
BS145 14.5 75 160
BS15 15.0 75 160
BS155 15.5 75 160
BS16 16.0 75 160
BS165 16.5 75 160
BS17 17.0 75 160
BS175 17.5 75 160
BS18 18.0 75 160
BS185 18.5 75 160
BS19 19.0 75 160
BS195 19.5 75 160
BS20 20.0 75 160
BS22 22.0 75 160
BS24 24.0 75 160
BS25 25.0 75 160
STUB DRILLS Materials
performance into all non-alloy materials. The 135° split point prevents the bit from drifting. Mainly used for
drilling sheet metal.
Product Drill Ø Flute Total Pack

Code (mm) Length (mm) Length (mm) Qty
Packs
HSSGS32 3.2 18 49 10
HSSGS33 3.3 18 49 10
HSSGS4 4.0 22 55 10
HSSGS41 4.1 22 55 10
HSSGS42 4.2 22 55 10
HSSGS49 4.9 26 62 10
HSSGS5 5.0 26 62 10
HSSGS51 5.1 26 62 10
116
BROACHING CUTTERS DRILLING
BROACHING CUTTERS Materials
Manufactured from a high grade M2 tool steel for drilling heavy gauge non-alloy materials, with magnetic drills.
Pilot rod must be used to prevent drifting.
30mm SHORT REACH 50mm LONG REACH

Product Cutter Ø Cutter Depth Product Cutter Ø Cutter Depth
Singles Singles
BCS12 12 30 BCL12 12 50
BCS13 13 30 BCL13 13 50
BCS14 14 30 BCL14 14 50
BCS15 15 30 BCL15 15 50
BCS16 16 30 BCL16 16 50
BCS17 17 30 BCL17 17 50
BCS18 18 30 BCL18 18 50
BCS19 19 30 BCL20 20 50
BCS20 20 30 BCL21 21 50
BCS21 21 30 BCL22 22 50
BCS22 22 30 BCL24 24 50
BCS23 23 30 BCL26 26 50
BCS24 24 30 BCL28 28 50
BCS25 25 30 BCL30 30 50
BCS26 26 30 BCL32 32 50
BCS27 27 30 BCL39 39 50
BCS28 28 30
BCS29 29 30
BCS30 30 30
BCS31 31 30
BCS32 32 30
BCS33 33 30
BCS35 35 30
BCS36 36 30
BCS38 38 30
BCS39 39 30
BCS40 40 30
BCS50 50 30
REPLACEMENT PILOT PINS

Product Cutter Ø Cutter Depth
Code (mm) (mm)
Singles
BCL301250 12-50 30
A pilot pin used with broaching cutters in order to BCL501250 12-50 50
centre the bit when drilling.
117
DRILLING COUNTERSINKS, CUTTERS & STEP DRILLS
COUNTERSINKS Materials
DE-BURRING COUNTERSINKS 3 FLUTE COUNTERSINKS

A single flute countersink designed for general purpose These engineering quality countersinks drill a precise
countersinking, chamfering or de-burring in alloy and recess to allow a fastener head to sit flush in alloy and
non-alloy metals, timber and man-made boards. non-alloy metals, timber and man-made boards.
Product Ø Product Ø Screw Ø Screw Ø

Code (mm) Code (mm) (mm) (imp.)
Singles Singles
CS25 2 to 5 CS63 6.3 3.0 4-5
CS510 5 to 10 CS83 8.3 3.5-4.0 6-8
CS1015 10 to 15 CS104 10.4 4.5-5.0 10
CS1520 15 to 20 CS124 12.4 6.0 12
CS165 16.5 8.0 16
CS205 20.5 - -
CS250 25.0 - -
CONE CUTTERS & STEP DRILLS Materials
CONE CUTTERS STEP DRILLS

For drilling, enlarging and de-burring holes in thin Ideal for drilling, enlarging or de-burring a precise hole
sheet metal up to a thickness of 2mm into thin materials such as alloy and nonalloy metals
up to a thickness of 4mm.
Product Ø Product Ø
Code (mm) Code (mm)
Singles Singles
CC314 3 to 14 SD412 4,5,6,7,8,9,10,11,12
CC520 5 to 20 SD420 4,6,8,10,12,14,16,18,20
CC531 5 to 31 SD430 4,6,8,10,12,15,18,20,22,24,26,28,30
CC1631 16 to 31 SD439 4,6,8,10,12,21,25,27,30,33,36,39
118
WIRE BRUSHES DRILLING
CRIMPED STEEL WIRE BRUSH Materials
Suitable for use with drill drivers

when cleaning and polishing metal
surfaces. The crimped wire is ideal Product Ø Wire Max
Shaft
for lightly removing loose Code (mm) Thickness R.P.M
paint, rust or dirt
without scarring the Singles
base material. 50SWC 50 ¼” Hex 0.3 4,500
75SWC 75 ¼” Hex 0.3 4,500
100SWC 100 ¼” Hex 0.3 4,500
CRIMPED STEEL WIRE Materials

END BRUSH
when cleaning and polishing metal
surfaces. The crimped wire is ideal Product Ø Wire Max
Shaft
for lightly removing loose paint, Code (mm) Thickness R.P.M
rust or dirt without scarring the Singles
base material. 25SEC 25 ¼” Hex 0.3 4,500
CRIMPED STEEL WIRE CUP BRUSH Materials

when cleaning and polishing
metal surfaces. The crimped Product Ø Wire Max
Shaft
wire is ideal for lightly removing Code (mm) Thickness R.P.M
loose paint, rust or dirt without Singles
scarring the base material. 50SCC 50 ¼” Hex 0.3 4,500
75SCC 75 ¼” Hex 0.3 4,500
TWIST KNOT STEEL WIRE WHEEL BRUSH Materials
Suitable for use with drill driver

when cleaning metal, masonry and
wood surfaces. The twist brush is Product Ø Wire Max
Shaft
Code (mm) Thickness R.P.M
ideal for aggressive
removal of paint, Singles
rust, rubber, 75SWT 75 ¼" 0.3 4,500
concrete or dirt.
119
DRILLING WIRE BRUSHES
NYLON WHEEL BRUSH Materials

when cleaning stone, masonry
and wood surfaces.
The nylon brush is less Product Ø Wire Max
Shaft
aggressive and an Code (mm) Thickness R.P.M
ideal option for Singles
light de-burring,
75SWN 75 ¼” Hex 1.2 4,500
polishing and
100SWN 100 ¼” Hex 1.2 4,500
finishing
NYLON CUP BRUSH Materials

when cleaning stone, masonry
and wood surfaces. The nylon Product Ø Wire Max
Shaft
brush is less aggressive and an
ideal option for light Singles
de-burring, polishing 50SCN 50 ¼” Hex 1.2 4,500
and finishing 75SCN 75 ¼” Hex 1.2 4,500
CRIMPED STEEL WIRE CUP BRUSH Materials
Suitable for use with angle

grinders when cleaning and
polishing metal surfaces. Product Ø Wire Max
Shaft
The crimped wire is ideal Code (mm) Thickness R.P.M
for lightly removing Singles
loose paint, rust or dirt 75TCC 75 M14 0.3 12,500
without scarring the 100TCC 100 M14 0.3 8,500
base material. 125TCC 125 M14 0.3 6,500
150TCC 150 M14 0.3 6,500
CRIMPED STAINLESS STEEL WIRE CUP BRUSH Materials
Suitable for use with angle grinders

when cleaning and polishing
stainless steel and aluminium.
The crimped stainless steel Product Ø Wire Max
Shaft
wire is ideal for lightly Code (mm) Thickness R.P.M
removing loose paint, rust
Singles
or dirt without scarring or
75TCCSS 75 M14 0.5 8,500
contaminating the
100TCCSS 100 M14 0.5 8,500
base material.
120
WIRE BRUSHES DRILLING
TWISTED KNOT STEEL WIRE Materials

CUP BRUSH
wood surfaces. The 0.5mm steel Product Ø Wire Max
left-hand twist wire is hard wearing Shaft
and gives an aggressive removal
of paint, rust, rubber, concrete or Singles
dirt whist maintaining its shape 80TCT 80 M14 0.5 8,500
and improves user control. The metal 100TCT 100 M14 0.5 8,500
ring around the base of the cup reduces the
likelihood of centrifugal-splay and can also be
removed to increase usage life.
TWISTED KNOT STAINLESS STEEL WIRE Materials

CUP BRUSH
when cleaning stainless steel and
aluminium. The 0.5mm left-hand Product Ø Wire Max
Shaft
twist wire is hard wearing and Code (mm) Thickness R.P.M
gives an aggressive removal of
Singles
paint, rust, rubber, concrete or dirt
100TCTSS 100 M14 0.5 8,500
whist maintaining its shape. The
stainless steel reduces contamination of
the base material. The metal ring around the base of the
cup reduces the likelihood of centrifugal-splay and can
also be removed to increase usage life.
CRIMPED STEEL WIRE BEVEL BRUSH Materials
Suitable for use with angle grinders when

cleaning and polishing
metal surfaces. The Product Ø Wire Max
Shaft
crimped wire is ideal Code (mm) Thickness R.P.M
for lightly removing
loose paint, rust or dirt Singles
without scarring the 115TBC 115 M14 0.3 12,500
base material.
CRIMPED STAINLESS STEEL WIRE BEVEL BRUSH Materials
Suitable for use with angle grinders when cleaning

and polishing metal surfaces. The crimped
stainless steel wire is ideal for
lightly removing loose Product Ø Wire Max
Shaft
paint, rust or dirt Code (mm) Thickness R.P.M
without scarring or
contaminating the
Singles
115TBCSS 115 M14 0.3 12,500
base material.
121
DRILLING WIRE BRUSHES

BEVEL BRUSH
wood surfaces. The twist brush Product Ø Wire Max
Shaft
is ideal for aggressive Code (mm) Thickness R.P.M
removal of paint, rust,
Singles
rubber, concrete or
100TBT 100 M14 0.5 12,500
dirt. Ideal for accessing
awkward areas.
TWISTED KNOT STAINLESS STEEL WIRE

Materials
BEVEL BRUSH
Suitable for use with angle grinders when
cleaning metal, masonry and wood surfaces.
The twist brush is ideal for aggressive
removal of paint, rust, rubber,
Product Ø Wire Max
concrete or dirt. Ideal for Code (mm)
Shaft
Thickness R.P.M
accessing awkward
areas. The stainless steel Singles
reduces contamination 100TBTSS 100 M14 0.5 12,500
of the base material.
TWISTED KNOT STEEL WIRE BRUSH Materials
Suitable for use with angle grinders when cleaning

metal, masonry and wood surfaces. The twist brush is
ideal for aggressive removal
of paint, rust, rubber, Product Ø Wire Max
Shaft
concrete or dirt. Code (mm) Thickness R.P.M
Ideal for accessing Singles
awkward areas. 115TWT 115 M14 0.5 12,500
TWISTED KNOT STAINLESS STEEL Materials

WIRE BRUSH
Suitable for use with angle grinders when cleaning metal,
masonry and wood surfaces. The twist brush is ideal for
aggressive removal of paint, rust, rubber, concrete or dirt. Product Ø Wire Max
Ideal for accessing awkward Shaft
areas. The stainless
steel reduces Singles
contamination of 115TWTSS 115 M14 0.5 12,500
the base material.
122
CHUCKS, KEYS & ADAPTOR SETS DRILLING

WHEEL BRUSH
Suitable for use with 125 mm (5in) angle grinders with a
22.2 mm (7/8in) bore with a standard flange plate. Used
when cleaning metal, masonry and wood surfaces. The Product Ø Wire Max
Shaft
twist brush is ideal for aggressive removal of paint, rust, Code (mm) Thickness R.P.M
rubber, concrete
Singles
or dirt. Ideal
125HWT 125 22 0.5 12,500
for accessing
awkward areas.
STEEL WIRE WHEEL BRUSH Materials

WITH PLASTIC REDUCER SET
Suitable for use with a bench grinder when cleaning Product Wire Max
Ø
and polishing metal surfaces. The crimped wire is ideal Shaft
for lightly removing
loose paint, rust Singles
or dirt without 150HWC 150 32 0.3 6,000
scarring the 200HWC 200 32 0.3 4,500
base material.
CHUCKS, KEYS & ADAPTOR SETS
3/8” CHUCK & KEY SETS 1/2” KEYLESS CHUCK & SDS SETS
A traditional keyed chuck that A keyless hand-tightened
fits drills with 3/8” shaft, sold three jaw chuck that fits
with a key. Suitable for drills with ½” shaft. Ideal
1.5mm – 10mm drills bits. for impact drills up to 750
watt. Sold with an SDS plus
adaptor. Suitable for
1.5mm – 13mm drills bits.
Product Capacity Product Capacity

Code (mm/mount) Code (mm/mount)
Sets Sets
C10 1.5 - 10mm, 3/8” x 24F KKEY 1.5 - 13mm, 1/2” x 20F
Chucks continue on next page...

123
DRILLING CHUCKS & KEYS
1/2” CHUCK, KEY & SDS SETS HEAVY DUTY KEYLESS CHUCK
A traditional keyed chuck that fits
drills with ½” shaft, sold with a key.
Suitable for 1.5mm – 13mm drills bits. A keyless hand-tightened three
jaw chuck that fits drills with ½”
* SDS plus adaptor shaft. Ideal for impact drills up to
only with KEY 750 watt. Suitable for 1.5mm –
13mm drills bits.

Sets Singles
C13 1.5 - 13mm, 1/2” x 20F HDKC13 1.5 - 13mm, 1/2” x 20F
KEY* 1.5 - 13mm, 1/2” x 20F
CHUCK KEYS SDS PLUS ADAPTORS
A replacement key for the

traditional ½” keyed chuck.

Singles Singles
AS2 To fit 1/2” keyed chuck SDSCA SDS plus to 1/2” x 20M
SUPER HEAVY DUTY CHUCK SINGLE HANDED KEYLESS CHUCK
A keyless heavy duty hand- A keyless single hand-tightened

tightened three jaw chuck that fits three jaw chuck that fits drills with
drills with ½” shaft. Ideal for impact ½” shaft. Ideal for impact drills up
drills up to 1000 watt. Suitable for to 750 watt. Suitable for 1.5mm –
1.5mm – 13mm drills bits. 13mm drills bits.

Singles Singles
SHDKC 1.5 - 13mm, 1/2” x 20F SHKC13 1.5 - 13mm, 1/2” x 20F
124
DRILL SETS DRILLING
HSS BRAD POINT DRILL SET

Qty
Code (mm) L (mm) L (mm)
Bit Set - Qty 15

3.0 37 60 3
3.5 45 70 2
4.0 45 75 2
4.5 55 80 1
5.0 60 85 1
B15SET 5.5 60 90 1
6.0 60 90 1
6.5 65 95 1
A 15 piece mixed selection of the most popular Brad 7.0 67 100 1
Point wood drills. Sold in a robust weatherproof 8.0 77 110 1
case. 10.0 80 120 1
HSS DRILL SET

Qty
Bit Set - Qty 15

1.5 18 40 2
2.0 24 49 2
2.5 30 57 2
3.0 33 61 1
3.2 36 65 1
3.5 39 70 1
HSS15SET
4.0 43 75 1
4.5 47 80 1
5.0 52 86 1
A 15 piece mixed selection of the most popular HSS 6.0 57 93 1
Ground Metal Drills with a 135° quick start split point. 8.0 75 117 1
Sold in a robust weatherproof case. 10.0 87 133 1
FLAT WOOD BIT SETS

Product Drill Ø Total
Qty
Code (mm) L (mm)
Bit Set - Qty 7

10.0 152 1
12.0 152 1
16.0 152 1
F7SET 19.0 152 1
22.0 152 1
25.0 152 1
32.0 152 1
A selection of quick release flat wood drills. The quick

release feature is designed to ensure a rapid change of
bits making it ideal for multiple applications. Sold in a
robust weatherproof case.
125
DRILLING DRILL SETS
MASONRY DRILL SET

Qty
Bit Set - Qty 15

4.0 45 75 1
5.0 50 85 2
5.5 50 85 3
M15SET 6.0 60 100 2
7.0 60 100 3
A mixed selection of 15 carbide tipped Masonry Drills. 8.0 75 120 2
The range covers the most popular hole sizes for plastic 10.0 75 120 2
plugs. Sold in a robust weatherproof case.
HSS & MASONRY DRILL SET Product Drill Ø Working Total Drill
Qty
Code (mm) L (mm) L (mm) Type
Bit Set - Qty 17

1.5 18 40 HSS 1
2.0 24 49 HSS 1
2.5 30 57 HSS 1
3.0 33 61 HSS 1
3.2 36 65 HSS 1
3.5 39 70 HSS 1
4.0 43 75 HSS 1
4.5 47 80 HSS 1
MIX17SET 4.8 55 85 HSS 1
5.0 55 86 HSS 1
5.5 60 93 HSS 1
6.0 65 93 HSS 1
A mixed selection of 12 HSS Ground Metal Drills with
5.0 50 85 Masonry 1
a 135° quick start split point and 5 carbide tipped 5.5 50 85 Masonry 1
Masonry Drills. Sold in a robust weatherproof case. 6.0 60 100 Masonry 1
7.0 60 100 Masonry 1
10 75 120 Masonry 1
CARPENTERS KIT
(SPEED AUGERS & FLAT WOOD BITS)
Short length drill ideal for drilling
in-between timber joists and
studding when first fixing pipes Product Drill Ø Total Drill
Qty
and cables. Contains three four Code (mm) L (mm) Type
flute speed augers for rapid
chip ejection and cleaner Bit Set - Qty 5
16.0 159 4 Cutter Speed Auger 3
drilling and two flat
20.0 159 4 Cutter Speed Auger 2
bits for larger
CKIT 25.0 159 4 Cutter Speed Auger 2
holes. Sold with 32.0 152 Flat Wood Bit 1
a ¼ hex quick 40.0 152 Flat Wood Bit 1
change shank. Ideal for
use with an impact driver to
further reduce overall tool and
drill working length.
126
CUTTING
128 - HOLESAWS 134 - CERAMIC BLADES
128 - HOLESAW ACCESSORIES 134 - MORTAR RAKING BLADES
130 - HOLESAW KITS 135 - CUP GRINDING WHEELS
131 - DRY DIAMOND CORE BITS 135 - BONDED ABRASIVE DISCS
131 - DIAMOND CORE KIT 136 - JIGSAW BLADES
132 - DIAMOND CORE ACCESSORIES 143 - RECIPROCATING SAW BLADES
133 - DIAMOND BLADES 147 - CIRCULAR SAW BLADES
CUTTING HOLESAWS
HOLESAWS - VARIABLE PITCH Materials
Variable
Pitch
A variable pitch tooth pattern which clears

dust more efficiently and gives superior cutting
performance in wood, plastic, non-ferrous metals
and man-made boards. High quality M3 grade HSS
steel cutting edge and compatible with most makes
of arbor.
Holesaw Kits available on page 130
Product Saw Threaded Arbor Product Saw Threaded Arbor

Code Ø (mm) Mount (inch) to Suit Code Ø (mm) Mount (inch) to Suit
Singles Singles
HS14 14.0 1/2 - 20 AA4, AA1, SDSA1 HS57 57.0 1/2 - 18 AA2, SDSA2
HS32 32.0 1/2 - 18 AA2, SDSA2 HS89 89.0 1/2 - 18 AA2, SDSA2
ARBORS
Product For Holesaw Thread

Shank
Code Dia. (mm) Shank
Singles
AA4 14-30 Hex 9.5 1/2” x 20
AA1 14-30 Hex 11 1/2” x 20
AA2 32-210 Hex 11 5/8” - 18
SDSA1 14-30 SDS Plus 1/2” x 20
AA4 AA1 AA2 SDSA1 SDSA2 SDSA2 32-210 SDS Plus 5/8” - 18
128
HOLESAWS CUTTING
HOLESAWS - CONSTANT PITCH Materials
Constant
Pitch
A constant pitch tooth pattern ensures smooth

cutting and less “chatter” when drilling metal,
particularly thin sheet. High quality M42 grade 5%
Cobalt HSS steel cutting edge and compatible with
most makes of arbor.
Holesaw Kits available on page 130
Product Saw Threaded Arbor Product Saw Threaded Arbor

Code Ø (mm) Mount (inch) to Suit Code Ø (mm) Mount (inch) to Suit
Singles Singles
HSC14 14.0 1/2 - 20 AA4, AA1, SDSA1 HSC64 64.0 5/8 - 18 AA2, SDSA2
HSC32 32.0 5/8 - 18 AA2, SDSA2 HSC102 102.0 5/8 - 18 AA2, SDSA2
HSC60 60.0 5/8 - 18 AA2, SDSA2
PILOT DRILLS & EXTENSION RODS

HPD
Product Length
HPDL Description
Code (mm)
HPDC Singles
HPD HSS Pilot drill 75
HPDL HSS Long pilot drill 105
HSE
HPDC HSS Cobalt drill 75
HSE Extension rod for AA2 (arbor) 300
129
CUTTING HOLESAW KITS
HOLESAW KIT (PLUMBERS)

A mixed selection of 8 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes
to accommodate metric pipes.
Product Size
(mm)
Product Kit Qty
Code
KIT
Contents of Kit
17.0 Holesaw 1
24.0 Holesaw 1
30.0 Holesaw 1
HSKITPL 34.0 Holesaw 1
43.0 Holesaw 1
52.0 Holesaw 1
14-30 Arbor (AA1) 1
32-210 Arbor (AA2) 1
HOLESAW KIT (ELECTRICIAN)

A mixed selection of 9 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes
used when installing down-lights, conduit and wiring.
Product Size
(mm)
Product Kit Qty
Code
KIT
Contents of Kit
22.0 Holesaw 1
27.0 Holesaw 1
38.0 Holesaw 1
56.0 Holesaw 1
HSKITEL
67.0 Holesaw 1
72.0 Holesaw 1
76.0 Holesaw 1
14-30 Arbor (AA1) 1
32-210 Arbor (AA2) 1
HOLESAW KIT (HANDY MAN)

A mixed selection of 10 HSS M3 variable pitch holesaws and arbors. The range covers the most popular
holesaw sizes.
Product Size
(mm)
Product Kit Qty
Code
KIT
Contents of Kit
17.0 Holesaw 1
20.0 Holesaw 1
25.0 Holesaw 1
30.0 Holesaw 1
HSKITHA 38.0 Holesaw 1
43.0 Holesaw 1
52.0 Holesaw 1
72.0 Holesaw 1
14-30 Arbor (AA1) 1
32-210 Arbor (AA2) 1
130
DRY DIAMOND CORE BITS & KIT CUTTING
DRY DIAMOND CORE BITS Materials
Manufactured using laser-welded technology, these

cores have been specifically designed to drill large
clean holes in masonry and concrete block.
FOR ROTARY USE ONLY.
Product Drill Length Height

Code Ø (mm) (mm) (mm)
Singles
GPCP22300 22 300 10
GPCP28300 28 300 10
GPCP32150 32 150 10
GPCP38150 38 150 10
GPCP48150 48 150 10
GPCP52150 52 150 10
GPCP65150 65 150 10
GPCP78150 78 150 10
GPCP82150 82 150 10
GPCP91150 91 150 10
GPCP107150 107 150 10
GPCP117150 117 150 10
GPCP127150 127 150 10
GPCP152150 152 150 10
DIAMOND CORE KIT

Five of the most popular sizes with all the
accessories required in a aluminium case.
Product Drill 0/ To Fit Length

(mm) Description Kit Qty
Code (mm)
KIT
Contents of Kit
38 150 Diamond Core 1
PDCK5
1/2” BSP 240 Extension 1
1/2” BSP 88 Hex Adaptor 1
1/2” BSP 115 SDS Adaptor 1
8 200 Pilot Drill 1
8 75 Taper Drift
131
CUTTING DRY DIAMOND CORE ACCESSORIES
DRY DIAMOND CORE ACCESSORIES
BSP EXTENSION
Product Overall Length

Fit
Code (mm)
An ½” BSP thread extension rod used where there is Singles

need for a deeper hole. DCE240P 240 ½” BSP
HEX ADAPTOR SDS ADAPTOR

An ½” Hex with ½” BSP (male) thread, for use An SDS Plus with ½” BSP (male) thread, for use
with a standard core drill. Available in 88mm and with an SDS-Plus drill, when in rotary mode only.
240mm lengths. Available in 115mm and 240mm lengths.
Product Overall Product Overall

Fit Fit
Code Length (mm) Code Length (mm)
Singles Singles
DCAH88P 88 ½” BSP DCAS115P 115 ½” BSP
DCAH240P 240 ½” BSP DCAS240P 240 ½” BSP
PILOT DRILL PILOT ROD

Morse taper TCT masonry drill bit used to prevent Morse taper rod used once a hole has been drilled to
the core drifting. prevent the core drifting.
Product Length Product Length

Drill Ø (mm) Ø (mm)
Code (mm) Code (mm)
Singles Singles
DCPD13210 13 210 DCPR225 12 225
TAPER DRIFT
Product Length
Ø (mm)
Code (mm)
Used for knocking morse taper tools out of spindles Singles

and sockets. DCTD 8 75
132
DIAMOND BLADES CUTTING
MULTI-PURPOSE BLADES
Materials
CHIMAERA PREMIUM LASER WELDED BLADE

A high quality multi-material blade designed for A premium quality laser welded, turbo segmented
cutting construction materials. Continuous rim turbo blade. For use in building materials such as concrete,
segmented blade for smooth cutting of construction common bricks, paving slabs, kerbs, lintels, clay roof
material and reinforced concrete. tiles and natural stone.
Product Disc Ø Disc Bore Segment Product Disc. Ø Disc Bore Segment
Code (mm) (inch) (mm) Height (mm) Code (mm) (inch) (mm) Height (mm)
Singles Singles
MM115222 115 4½ 22.2 10 GPPL115222 115 4½ 22.2 12
MM125222 125 5 22.2 10 GPPL125222 125 5 22.2 12
MM230222 230 9 22.2 10 GPPL230222 230 9 22.2 12
GPPL30020 300 12 20.0 12
MM30020 300 12 20.0 10
GPPL300222 300 12 22.2 12
MM300222 300 12 22.2 10 GPPL35020 350 14 20.0 12
MM35020 350 14 20.0 10 GPPL350254 350 14 25.4 12
MM350254 350 14 25.4 10 GPPL450254 450 18 25.4 12
LASER WELDED BLADE SINTERED BLADE

A cost effective laser welded blade with longer life An economic product for cutting medium density
than the sintered blades. For use in medium density building materials such as common bricks, paving
building materials such as concrete, common bricks, slabs, kerbs and lintels.
paving slabs, kerbs, lintels, clay roof tiles and natural
stone.
Product Disc. Ø Disc Bore Segment Product Disc. Ø Disc Bore Segment
Singles Singles
GPL115222 115 4½ 22.2 10 GPE115222 115 4½ 22.2 7
GPL125222 125 5 22.2 10 GPE230222 230 9 22.2 7
GPL230222 230 9 22.2 10 GPE30020 300 12 20.0 7
GPL30020 300 12 20.0 10
133
CUTTING DIAMOND BLADES
CERAMIC BLADES Materials
For use with angle grinders and portable tile cutting

machines. Suitable for cutting ceramic tiles, marble, porcelain
and natural stone. Can be used wet or dry.
THIN TURBO SINTERED

A top quality blade for cutting porcelain, ceramics A cost effective blade for cutting porcelain, ceramics
and marble. Continuous turbo design for minimal and marble. Continuous rim for minimal chipping of
chipping of the material, while the special thin body the material
reduces resistance and increases speed of cut.
Singles Singles
TP115222 115 4½ 22.2 10 TE10016 100 4 16.0 5
TP125222 125 5 22.2 10 TE115222 115 4½ 22.2 5
TP230222 230 9 22.2 10 TE150222 150 6 22.2 5
TE180222 180 7 22.2 5
MORTAR RAKING BLADES Materials
A product for raking mortar from between bricks prior to re-pointing.
SILVER BRAZED SINTERED

A top quality product with 10mm silver brazed An economic product with 7mm sintered segments.
segments for a long service life.
Singles Singles
MRP115 115 4½ 22.2 10 MRE115 115 4½ 22.2 7
MRP125 125 5 22.2 10 MRE125 125 5 22.2 7
134
GRINDING WHEEL & ABRASIVE DISC CUTTING
CUP GRINDING WHEEL Materials
A double row, silver brazed wheel for smoothing

and removing shutter marks from medium density
concrete.
Product Disc. Ø Disc Bore Segment

Code (mm) (inch) (mm) Height (mm)
Singles
CGDE115 115 4½ 22.2 10
BONDED ABRASIVE DISC Materials
Used for cutting or grinding various types of metals. 1.0mm & 1.9mm
are ideal for cutting stainless steel.
FOR CUTTING FOR GRINDING

Product Disc. Ø Bore Thickness Max Product Disc. Ø Bore Thickness Max
Code (mm) (mm) (mm) RPM Code (mm) (mm) (mm) RPM
Singles Singles
FCM115222 115 22.2 2.5 13,300 DGM11522 115 22.2 6.4 13,300
FCM230222 230 22.2 3.2 6,500
FCM30020 300 20.0 3.2 5,000
FCMT115222 115 22.2 1.0 13,300
FCMT125222 125 22.2 1.0 12,200
FCMT230222 230 22.2 1.9 6,500
135
CUTTING JIGSAW BLADES
HIGH CARBON STEEL BLADES

FOR WOOD & PLASTIC
High quality carbon steel for use
with softer materials, such as SOLD IN
PACKS
hard and soft wood, plastics and
OF 5
laminated boards.
MWS - MILLED & WAVY SET TEETH

This pattern gives a fine, clean, straight cut.
SOFTWOOD PLASTIC MWS CLEAN
STRAIGHT CUT BLADE (BOSH EQUIV. - T119B)
Product Pitch Working Length Total Length Height Width Cut Depth
T.P.I
Code (mm) (mm) (mm) (mm) (mm) (mm)
Pack of 5
AHW12 2 13 50 76.5 7.8 1.00 2.0 - 15.0
CURVED
CURVE CUT BLADE (BOSH EQUIV. - T119BO)
These blades have a reduced blade depth to allow them to perform curved cuts more easily.
T.P.I
Pack of 5
AHW12K 1.35 19 50 76.5 4.5 1.25 1.5 - 15.0
MSS - MILLED & SIDE SET TEETH

A quick but fairly rough cut into wood and plastic.
SOFTWOOD PLASTIC MSS COARSE
STRAIGHT CUT BLADE (BOSH EQUIV. - T111C)
T.P.I
Pack of 5
AHG13 3 8.5 75 100 9.8 1.27 4.0 - 50.0
136
JIGSAW BLADES CUTTING
SSS - SIDE SET & SHARPENED

This configuration gives a fast, medium cut.
SOFTWOOD PLASTIC SSS COARSE
STRAIGHT CUT BLADE (BOSH EQUIV. - T144D)
T.P.I
Pack of 5
AHGS14 4 6.35 75 100 7.8 1.27 5.0 - 50.0
CURVED
CURVE CUT BLADE (BOSH EQUIV. - T244D)
These blades have a reduced blade depth to allow them to perform
curved cuts more easily.
T.P.I
Pack of 5
AHGS24 4 6.35 75 100 6.5 1.27 5.0 - 50.0
GTG - GROUND & TAPER GROUND TEETH

These top quality blades give a clean, quick cut in both wood and
plastic.
SOFTWOOD PLASTIC GTG CLEAN
STRAIGHT CUT BLADE (BOSH EQUIV. - T101D)
T.P.I
Pack of 5
AHC14 4 6.35 75 100 7.8 1.45 10.0 - 45.0
T.P.I
Pack of 5
AHC12 2.5 10 75 100 7.8 1.45 3.0 - 30.0
137

plastic.
SOFTWOOD PLASTIC GTG CLEAN
HARDWOOD PRECISION
PRECISION CUT BLADE (BOSH EQUIV. - T101DP)
This blade is made from a thicker plate to help achieve a 900 cut. It
also makes this blade ideal for hardwood.
T.P.I
Pack of 5
AHC14D 4 6.35 75 100 7.8 1.68 10.0 - 45.0
CURVE CUT BLADE (BOSH EQUIV. - T101AO) LAMINATED CURVED

T.P.I
Pack of 5
AHC12K 1.35 19 50 76.5 4.5 1.25 1.5 - 15.0
LAMINATED DOWN
DOWN CUT BLADE (BOSH EQUIV. - T101BR)
Reversed teeth to cut on the down-stroke. This prevents the splintering
of decorative surfaces such as kitchen worktops.
T.P.I
Pack of 5
AHC12R 2.5 10 75 100 7.8 1.45 3.0 - 30.0
AHC32R 2.5 10 105 132 7.8 1.45 3.0 - 65.0
138
PREMIUM BI-METAL BLADES

FOR WOOD & PLASTIC
Combining the flexibility of a high
carbon steel body with a HSS
hardened cutting edge, resulting SOLD IN
in a tough, shatter resistant blade PACKS
which keeps its edge. Longer OF 5
service life leads to greater cost
effectiveness per blade.

ALL WOOD PLASTIC SSS COARSE
STRAIGHT CUT BLADE (BOSH EQUIV. - T144DF)
T.P.I
Pack of 5
AHGS14BI 4 6.35 75 100 7.8 1.27 5.0 - 50.0

plastic.
ALL WOOD PLASTIC GTG CLEAN
STRAIGHT CUT BLADE (BOSH EQUIV. - T101BF)
T.P.I
Pack of 5
AHC12BI 2.5 10 75 100 7.8 1.27 3.0 - 30.0
DOWN CUT BLADE (BOSH EQUIV. - T101BRF) LAMINATED DOWN
Reversed teeth to cut on the down-stroke. This prevents the splintering

of decorative surfaces such as kitchen worktops.
T.P.I
Pack of 5
AHC12RBI 2.5 10 75 100 7.8 1.27 3.0 - 30.0
139
HIGH CARBON STEEL BLADES

FOR METAL & PLASTIC SOLD IN
PACKS
Hardened high speed steel designed to cut hard materials such as mild steel, aluminium OF 5
and other non-ferrous metals.

NON-FERROUS ALUMINIUM MWS
T.P.I
Pack of 5
AMG12 2 13 55 76.5 7.8 1 2.5 - 6.0
T.P.I
Pack of 5
AMG32 1.8 14 105 132 9.8 1 2.5 - 6.0

A quick but fairly rough cut.
PLASTIC NON-FERROUS ALUMINIUM STEEL MSS
STRAIGHT FINE CUT BLADE (BOSH EQUIV. - T127D)
T.P.I
Pack of 5
AK14 3 8.50 75 100 7.8 1 3.0 -15.0 (30.0)
CURVE FINE CUT BLADE (BOSH EQUIV. - T227D) CURVED

These blades have a reduced blade depth to allow them to perform curved cuts more easily.
T.P.I
Pack of 5
AK24 3 8.50 75 100 6.5 1 3.0 -15.0 (30.0)
140
MWS - MILLED & WAVY SET TEETH FINE CUT BLADES

SHEET STEEL MWS
STRAIGHT EXTRA FINE CUT BLADE

(BOSH EQUIV. - T118G)
Extra fine cut enables this blade to cut very thin gauge sheet metal.
SHEET METAL ONLY
T.P.I
Pack of 5
AMG107 0.7 36 55 76.5 7.8 1.0 0.5 - 1.5
SANDWICH
STRAIGHT FINE CUT BLADE
(BOSH EQUIV. - T318A)
Long blade to cut sandwich material up to 80mm
T.P.I
Pack of 5
AMG31 1 25 105 132 9.8 1 1.0 - 3.0
SANDWICH
STRAIGHT FINE CUT BLADE
(BOSH EQUIV. - T118A)
T.P.I
Pack of 5
AMG11 1.2 21 55 76.5 7.8 1 1.2 - 2.0
CURVED
CURVE FINE CUT BLADE (BOSH EQUIV. - T218A)
T.P.I
Pack of 5
AMG21 1.2 21 55 76.5 6.4 1 1.2 - 2.0
141
PREMIUM BI-METAL BLADES

FOR METAL & PLASTIC SOLD IN
PACKS
Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, OF 5
resulting in a tough, shatter resistant blade which keeps its edge. Longer service life
leads to greater cost effectiveness per blade.

These top quality blades give a clean, quick cut
NON-FERROUS ALUMINIUM GTG
STRAIGHT CUT BLADE (BOSH EQUIV. - T101AF)
T.P.I
Pack of 5
AMC12BI 2.5 10 75 100 7.8 1.27 2.0 - 20.0

STEEL NON-FERROUS INOX MWS
STRAIGHT CUT BLADE (BOSH EQUIV. - T118BF)
T.P.I
Pack of 5
AMG12BI 2 13 55 76.5 7.8 1 2.5 - 6.0
STRAIGHT CUT BLADE (BOSH EQUIV. - T118AF)
Product Pitch Working Length Tota Length

Total Height Width Cut Depth
T.P.I
Pack of 5
AMG11BI 1.2 21 55 76.5 7.8 1 1.2 - 2.0
142
RECIPROCATING SAW BLADES CUTTING
HIGH CARBON STEEL RECIPROCATING

SAW BLADES SOLD IN
PACKS
High quality carbon steel for use with softer materials, such as OF 5
hard and soft wood, plastics and laminated boards.

STRAIGHT CUT BLADE (BOSH EQUIV. - S644D)
T.P.I
Pack of 5
A3021-150 4.2 6 130 150 19 1.27 6.0 - 100

GREENWOOD SSS COARSE
STRAIGHT CUT BLADE (BOSH EQUIV. - S1531L)
T.P.I
Pack of 5
A3029-240 6.35 4-5 220 240 19 1.27 190
WAVEY CUT
A quick straight smooth cut.
RUBBER CARPET LEATHER
STRAIGHT CUT BLADE (BOSH EQUIV. - 2313AW)

SOLD IN
PACKS
OF 3
T.P.I
Pack of 3
ARWM300 - - 280 300 19 1.27 250
143
CUTTING RECIPROCATING SAW BLADES
BI - METAL RECIPROCATING SAW BLADES

FOR CUTTING WOOD & PLASTIC SOLD IN
PACKS
OF 5

STRAIGHT CUT BLADE (BOSH EQUIV. - S1411DF)
T.P.I
Pack of 5
A3021-300BI 4.2 6 280 300 19 1.27 250
FOR CUTTING METAL

A quick but fairly rough cut.
NON-FERROUS STEEL INOX MSS
STRAIGHT CUT BLADE (BOSH EQUIV. - S922BF)
T.P.I
Pack of 5
A3018-280 2.5 10 260 280 19 0.9 3.0 - 5.0
144
RECIPROCATING SAW BLADES CUTTING

SOLD IN
FOR CUTTING METAL PACKS
OF 5

STEEL INOX MSS
NON-FERROUS
T.P.I
Pack of 5
A3013-150 1.8 14 130 150 19 0.9 3.0 - 8.0
NON-FERROUS
T.P.I
Pack of 5
A3013-200 1.8 14 180 200 19 0.9 3.0 - 8.0
STRAIGHT CUT BLADE (BOSH EQUIV. - S922AF)
SHEET METAL
T.P.I
Pack of 5
A3015-150 1 24 130 150 19 0.9 0.7 - 3.0
STRAIGHT CUT BLADE (BOSH EQUIV. - S1122AF)
SHEET METAL
T.P.I
Pack of 5
A3015-200 1 24 180 200 19 0.9 0.7 - 3.0
145
CUTTING RECIPROCATING SAW BLADES

SOLD IN
FOR CUTTING METAL PACKS
OF 5

STEEL INOX MSS
STRAIGHT CUT BLADE (BOSH EQUIV. - S)
NON-FERROUS
T.P.I
Pack of 5
A3013-150 1.8 14 130 150 19 0.9 3.0 - 8.0
STRAIGHT CUT BLADE (BOSH EQUIV. - S922EF)
T.P.I
Pack of 5
A3014-150 1.4 18 130 150 19 0.9 1.5 - 4.0
STRAIGHT CUT BLADE (BOSH EQUIV. - S1122EF)
T.P.I
Pack of 5
A3014-150 1.4 18 180 200 19 0.9 1.5 - 4.0
146
CIRCULAR SAW BLADES CUTTING
BLADES FOR WOOD

Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a
flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials.
ALL OUR BLADES CUT HARDWOOD, SOFTWOOD AND EXOTIC TIMBER.
COARSE / MEDIUM MEDIUM MEDIUM / FINE EXTRA FINE

(GENERAL PURPOSE) (COMBINATION) (TRIMMING / CROSSCUT) (FINE TRIM / FINISHING)
• Stone Fibre Board • Plywood • Veneers - Single & Double Sided • Plywood
• Cement Bonded Board • Plywood, Hardboard & MDF • Cement Bonded Board
• Soft Fibre Board • Particle Board with Plastic • Soft Fibre Board
Laminate On One Side
CIRCULAR SAW BLADES

For use in corded and cordless circular saws with blade sizes 140mm to 315mm.
Product Blade Ø Blade Ø Kerf Bore No. of Bushing Ring
Cut Type
Code (mm) (inch equiv.) (mm) (mm) Teeth Size (mm)
Singles
C1402016 140 5½ 2 20 16 Coarse / Medium -
C1502012 150 6 2 20 12 Coarse / Medium -
C1502040 150 6 2 20 40 Medium / Fine -
C1603016 160 6¼ 2 30 16 Coarse / Medium 16.00
C1603024 160 6¼ 2 30 24 Medium 16.00
C1653018 165 6½ 2 30 18 Medium 16 or 20
C1841624 184 7¼ 2 16 24 Coarse / Medium -
C1843024 184 7¼ 2 30 24 Coarse / Medium -
C1841640 184 7¼ 2 16 40 Medium / Fine -
C1843040 184 7¼ 2 30 40 Medium / Fine -
C1843060 184 7¼ 2 30 60 Extra Fine -
C1903024 190 7½ 2 30 24 Coarse / Medium 16 or 20
C1903040 190 7½ 2 30 40 Medium 16 or 20
C2103032 210 8¼ 2 30 32 Coarse / Medium 25.00
C2163024 216 8½ 2 30 24 Coarse / Medium -
C2163040 216 8½ 2 30 40 Medium / Fine -
C2163060 216 8½ 2 30 60 Extra Fine -
C2163080 216 8½ 2 30 80 Extra Fine -
C2303030 230 9 2 30 30 Coarse / Medium -
C2303040 230 9 2 30 40 Medium -
C2353024 235 9¼ 2 30 24 Coarse / Medium 16 or 20
C2353040 235 9¼ 2 30 40 Coarse / Medium 16 or 20
C2353060 235 9¼ 2 30 60 Medium / Fine 16 or 20
C2503040 250 10 equiv. 3 30 40 Medium 16,20 or 25.4
C2503060 250 10 equiv. 3 30 60 Medium / Fine 16,20 or 25.4
C2503080 250 10 equiv. 3 30 80 Extra Fine 16,20 or 25.4
C2543030 254 10 3 30 30 Coarse / Medium -
C2543040 254 10 3 30 40 Medium -
C2543060 254 10 3 30 60 Medium / Fine -
C2603030 260 10¼ 3 30 30 Coarse / Medium -
C2603060 260 10¼ 3 30 60 Medium / Fine -
C3003040 300 117⁄8 3 30 40 Medium -
C3003060 300 117⁄8 3 30 60 Medium / Fine -
C3003080 300 117⁄8 3 30 80 Medium / Fine -
C3153030 315 123⁄8 3 30 30 Coarse / Medium -
C3153048 315 123⁄8 3 30 48 Medium -
C3153060 315 123⁄8 3 30 60 Medium / Fine -
147
CUTTING CIRCULAR SAW BLADES
CORDLESS TRIM SAW BLADES

Designed for use with hand-held cordless circular saws, this range includes blades
for use on all types of timber and man-made boards.
Product Blade Ø Blade Ø Kerf Bore No. of

Cut Type
Code (mm) (inch equiv.) (mm) (mm) Teeth
Singles
T1361024 136 53⁄8 1.6 10 24 Medium
T1501024 150 6 1.6 10 24 Medium
T1651024 165 6½ 1.6 10 24 Coarse / Medium
T1652024 165 6½ 1.6 20 24 Coarse / Medium
T1651040 165 6½ 1.6 10 40 Medium / Fine
T1903024 190 7½ 1.6 30 24 Coarse / Medium
ZERO DEGREE MITRE SAW BLADES

For use with most mitre saws, these blades have precision ground teeth to give a
clean and smooth cut in all types of timber and man-made boards.

Cut Type
Singles
Z2163024 216 8½ 2.4 30 24 Coarse / Medium
Z2163048 216 8½ 2.4 30 48 Medium / Fine
Z2503048 250 10 equiv. 3 30 48 Medium
Z2503060 250 10 equiv. 3 30 60 Medium / Fine
BLADES FOR ALUMINIUM

Professional quality blades made with high quality
tungsten carbide tips to provide an excellent lifespan FINE
and a flawless finish. Available with different tooth (ALUMINIUM / PLASTIC)
configurations to provide multiple cut types in a • Thin Walled Extrusions
variety of materials. A range of blades for sizes 216, • Panels Of Aluminium
250 and 305mm diameters. • Plastic
-5 DEGREE ALUMINIUM BLADES

A range of blades for sizes 216, 250 and 305mm diameters.

Cut Type
Singles
A2163060 216 8½ 2.4 30 60 Fine
A2163080 216 8½ 2.4 30 80 Fine
A2503080 250 10 equiv. 2.4 30 80 Fine
A3053048 305 12 3 30 48 Fine
A3053060 305 12 3 30 60 Fine
A3053080 305 12 3 30 80 Fine
148
DRIVER BITS
AND ADAPTORS
150 - V5 IMPACT BITS 152 - DRIVER BIT SETS
151 - S2 DRIVER BITS 154 - ADAPTORS
DRIVER BITS V5 IMPACT DRIVER BITS
V5 IMPACT DRIVER BITS

Toughened for impact
V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. These durable
hardened and patented bits will extend the lifespan and gives optimum performance in all impact applications.
V5 PHILLIPS MIXED V5 DRIVER

DRIVER BITS BIT SET
Mixed selection of 50mm
impact resistant driver bits,
specifically designed for
use with an impact driver.
Product Length
Size Qty
Code (mm) Product Length
Size Type Qty
Handy Packs Code (mm)
1PH25V5 PH1 25 10 Set

2PH25V5 PH2 25 10 PZ2 50 Pozi 2
3PH25V5 PH3 25 10 PH2 50 Phillips 2
V5MIXSET
2PH50V5 PH2 50 5 T25 50 IM
T Drive 1
3PH50V5 PH3 50 5 T30 50 TIM Drive 1
V5 POZI V5 POZI
DRIVER BITS DRIVER BIT SET
Product Length
Size Qty
Code (mm)
Handy Packs
1CB25V5 PZ1 25 10 Product Length
Size Type Qty
Code (mm)
2CB25V5 PZ2 25 10
3CB25V5 PZ3 25 10 Set
1CB50V5 PZ1 50 5 PZ1 50 Pozi 1
2CB50V5 PZ2 50 5 V5PZSET PZ2 50 Pozi 3
3CB50V5 PZ3 50 5 PZ3 50 Pozi 2
V5 TIM DRIVE V5 TIM DRIVE

DRIVER BITS DRIVER BIT SET
Product Length
Size Qty
Code (mm) Product Length
Size Type Qty
20TX25V5 T20 25 10 Set

25TX25V5 T25 25 10 T15 50 TIM Drive 1
30TX25V5 T30 25 10 T20 50 TIM Drive 2
V5TXSET
40TX25V5 T40 25 10 T25 50 TIM Drive 2
30TX50V5 T30 50 5 T30 50 TIM Drive 1
150
S2 DRIVER BITS DRIVER BITS
S2 DRIVER BITS
Hardened steel bits
S2 Steel is a premium quality alloy steel for
exceptional strength and durability over the
standard chrome vanadium driver bits.
PHILLIPS DRIVER BITS POZI DRIVER BITS
Product Length Product Length

Size Qty Size Qty
Code (mm) Code (mm)
Handy Packs Handy Packs

1PH25PACK PH 1 25 10 1CB25PACK PZ 1 25 10
Mini Bit Packs 2CB50PACK PZ 2 50 5
3CB50PACK PZ 3 50 5
2PH100GB PH 2 100 1
2PH150GB PH 2 150 1 Mini Bit Packs
2PH300GB PH 2 300 1 2CB100GB PZ 2 100 1
2CB150GB PZ 2 150 1
2CB300GB PZ 2 300 1
TIM DRIVE DRIVER BITS

SQUARE DRIVER BITS
Product Length
Size Qty
Code (mm)
Product Length
Size Qty
10TX25PACK T10 25 10
15TX25PACK T15 25 10
Handy Packs
20TX25PACK T20 25 10 2SQ25PACK No.2 25 10
25TX25PACK T25 25 10 2SQ50PACK No.2 50 5
30TX25PACK T30 25 10 Twin Packs
40TX25PACK T40 25 10 2SQ25GB No.2 25 2
30TX50PACK T30 50 5
HEX DRIVER BITS

SLOTTED DRIVER BITS
Product Length
Size Qty
Product Length Code (mm)
Size Qty
Code (mm)
Twin Packs
Twin Packs 3HX25GB 3.0 25 2
5508SL25GB 5.5 x 0.8 25 2 4HX25GB 4.0 25 2
6010SL25GB 6.0 x 1.0 25 2 5HX25GB 5.0 25 2
7012SL25GB 7.0 x 1.2 25 2 6HX25GB 6.0 25 2
1016SL25GB 10.0 x 1.6 25 2 8HX25GB 8.0 25 2
151
DRIVER BITS DRIVER BIT SETS
DRIVER BIT SETS
V5 IMPACT DRIVE BIT SET 31 PIECE S2 DRIVER BIT SET

Comprehensive 31 piece
assorted case containing
the most commonly used
25mm driver bits and a
quick release adaptor.
Convenient protective
case with TPE (Rubber)
corners and a handy
Mixed selection of 25mm impact resistant driver bits belt clip.
and a magnetic adaptor, specifically designed for
use with an impact driver. Product Length
Size Type Qty
Code (mm)
Product Length Set - Qty 31
Size Type Qty
Code (mm)
PZ1 25 Pozi 1
Set - Qty 10 PZ2 25 Pozi 5
PH2 25 Phillips 1 PZ3 25 Pozi 2
PZ1 25 Pozi 1 H4.0 25 Hex 1
PZ2 25 Pozi 2 H5.0 25 Hex 1
PZ3 25 Pozi 1 H6.0 25 Hex 1
V5MEDSET T15 25 IM
T Drive 1 H7.0 25 Hex 1
T20 25 IM
T Drive 1 3.5 25 Slotted 1
T25 25 TIM Drive 1 4.5 25 Slotted 1
T30 25 TIM Drive 1 5.0 25 Slotted 1
Quick Release Adapter 1 5.5 25 Slotted 1
DBSETG31 8.0 25 Slotted 1
T10 25 TIM Drive 1
T15 25 TIM Drive 1
24 PIECE S2 POUCH BIT SET T20 25 TIM Drive 1
T25 25 TIM Drive 1
A handy canvas pouch T30 25 TIM Drive 1
consisting of a mixed T40 25 TIM Drive 1
selection of the most PH1 25 Phillips 1
popular 50mm driver PH2 25 Phillips 3
bits with a quick release PH3 25 Phillips 2
screw driver. Ideal for 2.0 25 Square 1
maintenance and repair. Quick Release Adapter 1
Product Length
Size Type Qty
Code (mm)
Set - Qty 24
PH1 50 Phillips 1
PH2 50 Phillips 3
PH3 50 Phillips 1
PZ1 50 Pozi 1
PZ2 50 Pozi 3
PZ3 50 Pozi 1
T15 50 IM
T Drive 1
POUCHSET
T20 50 IM
T Drive 2
T25 50 TIM Drive 2
T30 50 IM
T Drive 2
H3 50 Hex 1
H4 50 Hex 1
H5 50 Hex 1
¼” - Quick Release 1
152
DRIVER BIT SETS DRIVER BITS
DRIVER BIT SETS
DRIVER BIT & HSS DRILL SET MIXED DRIVER BIT SET
A selection of quick release HSS Ground Metal Drills, A 37 piece mixed selection of the most popular 25mm
S2 driver bits, Socket Drivers and a Magnetic adaptor. and 50mm S2 driver bits with a magnetic adaptor
The quick release feature is designed to ensure a rapid and an assortment of socket drivers. Sold in a robust
change of bits making it ideal for multiple applications. weatherproof case.
Sold in a robust weatherproof case.
Product Size Product Size Length

Qty Qty
Code (mm) Type Code (mm) (mm) Type
Bit Set - Qty 20 Bit Set - Qty 37

1.5 HSS Drill Bit 1 4.0 25 Slotted 1
5.0 HSS Drill Bit 1 PH1 25 Phillips 1
6.0 HSS Drill Bit 1 PH2 25 Phillips 1
PH1 Phillips 1 PH3 25 Phillips 1
MIX20SET PH2 Phillips 1 PZ1 25 Pozi 1
PH3 Phillips 1 PZ2 25 Pozi 1
PZ1 Pozi 1 PZ3 25 Pozi 1
IM
PZ2 Pozi 1 T10 25 T Drive 1
IM
PZ3 Pozi 1 T15 25 T Drive 1
5.0 Slotted 1 T20 25 TIM Drive 1
6.0 Slotted 1 T25 25 TIM Drive 1
6.0 Nut Driver 1 T27 25 TIM Drive 1
8.0 Nut Driver 1 T30 25 TIM Drive 1
10.0 Nut Driver 1 BIT37SET T40 25 TIM Drive 1
- Quick Changer 1 3.0 25 Hex 1
4.0 25 Hex 1
5.0 25 Hex 1
5.5 25 Hex 1
6.0 25 Hex 1
PH1 50 Phillips 1
PH2 50 Phillips 1
PH3 50 Phillips 1
PZ1 50 Pozi 1
PZ2 50 Pozi 1
PZ3 50 Pozi 1
5.5 50 Slotted 1
7.0 50 Slotted 1
5 - Nut Driver 1
6 - Nut Driver 1
8 - Nut Driver 1
10 - Nut Driver 1
Magnetic Bit Holder 1
153
DRIVER BITS ADAPTERS
SOCKET DRIVERS
& ADAPTORS
SOCKET DRIVERS Product

Size
Length
Type
Pack
Code (mm) Qty
Mini Bit Packs

516SDB 5/16” 65 Hex 1
635SDB 1/4” 65 Hex 1
Also known as a 1/4” Nut Setter. Used for installing 6SDB 6mm 65 Hex 1
hexagon headed fasteners with a power tool. 10SDB 10mm 65 Hex 1
11BHSDB 11mm 65 Bi-Hex 1
13SDB 13mm 65 Hex 1
Bit Packs
516SDJ 5/16” 65 Hex 20
10SDJ 10mm 65 Hex 20
ONE PIECE ADAPTORS TWO PIECE ADAPTORS
A magnetic 1/4” hex drive adaptor machined from Quick

a single piece of stainless steel to give extended life Release
and durability. Available with or without a circlip to
improve bit retention.
An economic magnetic 1/4” hex drive adaptor
Product Length manufactured from two pieces of carbon steel.
Type Qty
Code (mm) Available with or without a circlip to improve bit
retention or with a quick release collar.
Mini Bit Packs
60MASSB 60 - 1
60MASSCB 60 Circlip 1
REGULAR
Product Length
Type Qty
Code (mm)
Mini Bit Packs

SDS ADAPTORS 60MAB 60 - 1
60MACB 60 Circlip 1
150MACB 150 Circlip 1
300MACB 300 Circlip 1
Bit Packs
60MAJ 60 - 20
A magnetic SDS Plus to 1/4” hex drive adaptor, ideal 60MACJ 60 Circlip 20
for converting your SDS-Plus drill in to a screwdriver
when in rotary mode only.
QUICK RELEASE
Product Length Product Length Pack
Type Qty Type
Code (mm) Code (mm) Qty
Mini Bit Packs Mini Bit Packs

80MASDSCB 80 1/4 1 60MAQRB 60 Circlip 1
150MAQRB 150 Circlip 1
300MAQRB 300 Circlip 1
Bit Packs
60MAQRJ 60 Circlip 20
154
HAND TOOLS
156 - HACKSAWS 157 - TAPE MEASURE
157 - HACKSAW BLADES 158 - HAND WIRE BRUSHES
HAND TOOLS HACKSAWS
HACKSAW FRAMES
LARGE HACKSAW LIGHTWEIGHT HACKSAW
A professional quality high tension hacksaw frame, Toughened steel frame with an ergonomic rubber
with an ergonomic and comfortable TPR grip handle. handle, includes one 24 TPI blade.
The storage compartment in the frame includes
four additional bi-metal blades with different teeth
configuration for multiple cutting applications.
Product Blade Size Product Blade Size

Code (Imp.) Code (Imp.)
Singles Singles
HD12HSF 12” 12HSF 12”
MINI HACKSAW JUNIOR HACKSAW
Die-cast aluminium frame with a soft grip rubber Die-cast aluminium frame with a soft grip rubber
handle. Ideal for difficult to reach areas. Will accept handle, includes one 24 TPI SK4 blade.
250-300mm hacksaw blades. Supplied with one
300mm (12”) 24 TPI blade.
Product Blade Size Product Blade Size

Code (Imp.) Code (Imp.)
Singles Singles
12MHSF 12” 6JHSF 6”
156
HACKSAW BLADES / TAPE MEASURE HAND TOOLS
HACKSAW BLADES
BI-METAL HACKSAW BLADES
Choose fine pitch (32T) for thinner materials, a Product Overall Length Teeth
Qty
coarser pitch (18T) for thicker steel. The teeth should Code (mm) Per Inch
point towards the front of the saw and cut on the
Pack
push stroke. Ideally, at least three teeth should be in
HSB18P5 300 18 5
the material. HSB24P5 300 24 5
HSB32P5 300 32 5
JUNIOR HACKSAW BLADES
General purpose 150mm junior hacksaw blades Product Overall Length Teeth
Qty
with 24 teeth per inch and pinned ends for secure Code (mm) Per Inch
fitting. Ideal for plastic and metal pipe cutting. Fits
Pack
all standard junior hacksaw frames.
SK4JB 150 24 5
TAPE MEASURE
Ergonomic shock resistant easy grip rubber jacket

for comfortable non-slip grip. A five meter super
strength matt nylon coated steel blade with metric
& inch measurements ideal for the professional user.
Product
Size
Code
(m x mm)
Singles
TM5M 5 x 19
157
HAND TOOLS BRUSHES
WOODEN HANDLE SCRATCH BRUSHES

Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. (Stainless steel
reduces contamination of the base material)
STEEL & STAINLESS STEEL STEEL WITH SCRAPER
Product W L No. of Product W L No. of

Material Material
Code (mm) (mm) Rows Code (mm) (mm) Rows
Singles Singles
3SBHD 28 295 3 x 18 Steel 4SSBHD 33 295 4 x 18 Steel
4SBHD 33 295 4 x 18 Steel
3SBSS 28 295 3 x 16 Stainless Steel
4SBSS 33 295 4 x 16 Stainless Steel
PLASTIC HANDLE WIRE HAND BRUSHES

SCRATCH BRUSHES
A high density wire

brush with an ergonomic
A moisture and chemical resistant ergonomic
plastic handle. Ideal for a
handle. Ideal for the professional user when
more aggressive removal of paint,
preparing surfaces to remove paint, rust, scale,
rust, scale, grout or dirt. Sold in three
grout or dirt.
brush types to suit a variety of applications.
Product W L No. of Product L
Material Material
Code (mm) (mm) Rows Code (mm)
Singles Singles
4SBP 30 280 4 x 15 Steel RWHB 255 Steel
6SBP 41 280 6 x 15 Steel BWHB 255 Stainless Steel
YWHB 255 Brass
FILE CLEANING BRUSH

For cleaning embedded filings from both wood
and metal files.
Product No. of
Material
Code Rows
Singles
FCB 110 x 40 Steel
158
ADHESIVE AND
WIPES
160 - HEAVY DUTY CLOTH TAPE 161 - HAZARD TAPE
10 - CLOTH TAPE 161 - BARRIER TAPE
160 - DOUBLE SIDED TAPE 162 - PVC TAPES
160 - MASKING TAPE 162 - ALUMINIUM FOIL TAPE
161 - PACKING TAPE 163 - SHIELD PROTECTIVE FILMS
161 - ANTI-SLIP TAPE 163 - EXTRA TOUGH BUILDERS WIPES
ADHESIVES & WIPES TAPES
HEAVY DUTY CLOTH TAPE DOUBLE SIDED CLOTH TAPE

Available in: Black Silver White Available in: White
A super-strength tape. Water resistant and extremely A strong double sided cloth tape designed to stick
durable, this industrial quality tape is designed to two surfaces together where an invisible joint is
be used in multiple indoor and outdoor applications. required. Ideal for fixing carpets, signs and
protective sheeting to multiple surfaces.
Product Length Width Product Length Width

Code (m) (mm) Code (m) (mm)
Packs Packs
HDCTBLACK 50 50 Black 1 DSCT 25 50 White 1
HDCTSILVER 50 50 Silver 1
HDCTWHITE 50 50 White 1
CLOTH TAPE HIGH STRENGTH PVC

Available in: Black Silver White BUILDERS TAPE
A medium quality cloth tape used to repair, fasten, Available in: Black
bundle, strengthen, mark, plus much more.
A strong versatile
PVC tape used for
jointing PVC and
polythene sheets
and membranes.
Frequently
used for sealing
contamination
barriers, polythene
dust sheets, silage
covers and bales.

Packs Packs
CTBLACK 50 48 Black 1 HSBT 33 75 Black 1
CTSILVER 50 48 Silver 1
CTWHITE 50 48 White 1
160
TAPES ADHESIVES & WIPES
PACKAGING TAPE 3 DAY MASKING TAPE

Available in: Brown Clear Available in: Cream
A quality tape giving you an instant and secure A general purpose masking tape for professional
fixture, ideal for sealing boxes, attaching labels results. Designed to be easily removed for up to
and general packing applications. three days without leaving residue or damaging
the surface.

Packs Packs
PTC 50 48 Clear 3 MT25 50 25 Cream 1
PTB 50 48 Brown 3 MT38 50 38 Cream 1
MT50 50 50 Cream 1
ALUMINIUM FOIL TAPE PVC INSULATION TAPE

Available in: Silver Available in: White
Black Grey
Red Blue Green Yellow
Brown Yellow Green
Used in jobs requiring Ideal for
moisture and insulating
chemical resistance, electrical
thermal conductivity, wires and
flame resistance, heat joints.
and light reflectance Easily torn
and is weather by hand,
resistant. Perfect for can be
joining foil covered written on
insulation, sealing off and cleanly
pipes and ducts. removed
from
smooth
surfaces.

Packs Packs
AFT50 45 50 Silver 1 ITBLACK 25 18 Black 10
AFT75 45 75 Silver 1 ITWHITE 25 18 White 10
AFT100 45 100 Silver 1 ITGREY 25 18 Grey 10
ITRED 25 18 Red 10
ITBLUE 25 18 Blue 10
ITGREEN 25 18 Green 10
ITYELLOW 25 18 Yellow 10
ITBROWN 25 18 Brown 10
ITGYSTRIPE 25 18 Green/Yellow 10
161
ADHESIVES & WIPES TAPES
BARRIER TAPE ANTI-SLIP TAPE

Available in: Red White Black Yellow Available in: Black Yellow Black
A durable non-adhesive polythene barrier tape, Manufactured using a high grade P60 grit to offer
ideal for marking out hazardous areas. Can be excellent grip, commonly used where there is risk
used internally and externally. Available in 100 & of slip hazards such as stairs, shop fronts, ramps and
500 metre rolls. The 500m comes in a convenient paths etc. Three layers of Acrylic Solvent glue gives
dispensing box for easy storage and application excellent adhesion to multiple surfaces.

Packs / Boxed* Packs

BART 100 70 Red/White 1 ASTSTRIPE 10 50 Black/Yellow 1
BARTYB 100 70 Yellow/Black 1 ASTBLACK 10 50 Black 1
BART500* 500 70 Red/White 1
BARTYB500* 500 70 Yellow/Black 1
HAZARD TAPE
Available in: Black Yellow
A durable self adhesive PVC hazard tape, ideal for

marking floors, walls and hazardous areas. Can be
used internally and externally.
Product Length Width

Colour Qty
Code (m) (mm)
Packs
HAZT 33 50 Black/Yellow 1
162
SHIELD PROTECTIVE FILMS & WIPES ADHESIVES & WIPES
SHIELD PROTECTIVE FILMS SHIELD EXTRA TOUGH

BUILDERS WIPES
Shield protective film is a highly effective self- Multi use wipes formulated to clean and remove wet
adhesive product, giving protection from foot traffic, and semi-cured paint, grease, glues, sealant, adhesive,
debris, spills etc. Easy to apply, the film can be left bitumen, tar, expanding foam, oil, silicone and
for up to 30 days before simple removal. permanent marker. Contains Aloe Vera and
Note: Please ensure you have read and fully anti-bacterial additive.
understood the usage guidelines before installation.
Product Thickness Width Length Product Wipes

Type
Code (mm) (mm) (m) Code Qty
Rolls Packs
25CP 0.05 600 25 Carpet SCRUB 100
50CP 0.05 600 50 Carpet
100CP 0.05 600 100 Carpet
25HP 0.05 600 25 Hard Surface
50HP 0.05 600 50 Hard Surface
25WP 0.05 600 25 Glass
50WP 0.05 600 50 Glass
163
DOOR ACCESSORIES
165 - TUBULAR LATCHES 166 - MODESTY BLOCKS
165 - ADJUSTABLE ROLLER CATCHES 166 - KNOCK DOWN BLOCKS
165 - BALES CATCHES 167 - PVC DOOR STOPS
166 - MAGNETIC CATCHES 167 - PVC DOOR WEDGES
166 - DOUBLE ROLLER CATCHES 167 - SPRING DOOR STOPS
166 - DOUBLE BALL CATCHES
LATCHES & CATCHES DOOR ACCESSORIES
DOOR ACCESSORIES
A comprehensive range of door
and cupboard accessories for a
variety of applications.
TUBULAR LATCHES - Brass Nickel
Designed for use on internal doors with a lever handle. Supplied with
matching strike plate in electro brass or nickel plated finishes.
Size Hole 0 Hole 0

Product
HxWxD in Strike in Catch Finish Qty
Code
(mm) Plate (mm) (mm)
Packs
TLBRASS63P 60 x 25 x 67 5.5 6.0 Electro Brass 1
TLNICKEL63P 60 x 25 x 67 5.5 6.0 Nickel 1
ADJUSTABLE ROLLER CATCHES - Brass Nickel
Used for securing internal doors that require just a push/pull handle.
Adjustable roller to adjust the closing tension of the door. Supplied
with matching strike plate in electro brass or nickel plated finishes.
Size Hole 0 Hole 0

Product
Code
Packs
ARCBRASSP 59 x 23.5 x 39 4.4 5.9 Electro Brass 1
ARCNICKELP 59 x 23.5 x 39 4.4 5.9 Nickel 1
BALES CATCHES - Brass
Used for securing internal doors that require just a push/pull handle.
Supplied with matching strike plate in electro brass.
Size Hole 0 Hole 0

Product
Code
Packs
BC19P 57 x 23 x 20 3.7 4.2 Electro Brass 1
165
DOOR ACCESSORIES CATCHES & BLOCKS
MAGNETIC CATCHES
A surface mounted Product Size Strength
Colour Qty
Code LxWxH (kg)
light duty catch for
securing cupboard Packs
or cabinet doors. MC4P 40 x 22 x 12 4.0 White 2
MC6P 58 x 22 x 16 6.0 White 2
DOUBLE ROLLER CATCHES - Zinc
A surface mounted push Product Size Hole

Finish Qty
Code (mm) 0 (mm)
fit catch for securing
cupboard or Packs
cabinet doors. DRP 28 x 32 4.5 Zinc 2
DOUBLE BALL CATCHES - Brass Chrome
A solid brass push fit catch Product Size

Finish Qty
Code (mm)
for securing cupboard
or cabinet doors. Packs
DBC40BRASSP 43 x 8.0 Electro Brass 2
DBC50BRASSP 50 x 8.5 Electro Brass 2
DBC40CHROMEP 43 x 8.0 Chrome Satin 2
DBC50CHROMEP 50 x 8.5 Chrome Satin 2
MODESTY BLOCKS
Used for the assembly Product Size Hole
Colour Qty
Code LxWxH 0 (mm)
of boards at
90 degrees. Packs
MBWHITEP 34 x 13 x 13 4.8 White 2
MBBROWNP 34 x 13 x 13 4.8 Brown 2
KNOCK DOWN BLOCKS

Used for the assembly Product Size Hole
Colour Qty
Code LxWxH 0 (mm)
of boards at 90 degrees.
Secured with a bolt Packs
into the thread of the KDWHITEP 35 x 25 x 12 4.9 White 2
second block which KDBROWNP 35 x 25 x 12 4.9 Brown 2
draws the two fittings
together.
166
DOOR STOPS & WEDGES DOOR ACCESSORIES
PVC DOOR STOPS

A floor mounted door stop Product Size Hole
Colour Qty
Code LxWxH 0 (mm)
used to prevent doors
from damaging Packs
walls. DSBLACKP 21 x 32 6.0 Black 2
DSWHITEP 21 x 32 6.0 White 2
PVC DOOR WEDGES

A triangular shaped wedge Product Size Hole
Colour Qty
Code LxWxH 0 (mm)
used to temporarily stop
doors from closing. Packs
DWEDGE 136 x 43 x 29 4.4 Grey 2
SPRING DOOR STOPS - Brass Nickel
A wall or skirting board Product Size Hole

Colour Qty
Code LxWxH 0 (mm)
mounted door stop
used to prevent doors Packs
from damaging SSBRASSP 78 x 24 4.0 Black 2
walls. SSNICKELP 78 x 24 4.0 Nickel 2
Available in Yellow, Zinc, Black

& Stainless Steel
See pages 12-14
Mixed Trays on page 20 To BS EN
ISO 1459
2:2008
167
PADLOCKS AND
SECURITY
169 - WEATHERPROOF PADLOCKS 171 - DISC PADLOCKS
169 - LAMINATED PADLOCKS 171 - STAINLESS STEEL PADLOCK
169 - COMBINATION PADLOCKS 172 - SAFES & CASES
170 - BRASS PADLOCKS 172 - CABLE LOCK
170 - RECTANGULAR PADLOCKS 172 - CABLES & CHAINS
PADLOCKS PADLOCKS & SECURITY SOLUTIONS
WEATHERPROOF PADLOCKS
A laminated padlock with a durable vinyl
cover to enhance corrosion resistance and SECURITY
RATING
improve weatherproofing.
IDEAL FOR: WEATHER

RATING
Sheds Gates Chains
Product Size Shackle Gauge Security

Keys Qty
Code (mm) (mm) Rating
Packs
WP40 40 8 5 3 1
LAMINATED PADLOCKS
An economic padlock ideal for lower
security applications. SECURITY
RATING
WEATHER
IDEAL FOR:
RATING
Sheds Gates Chains
STANDARD SHACKLE LONG SHACKLE

Product Size Shackle Gauge Security Product Size Shackle Gauge Security
Keys Qty Keys Qty
Code (mm) (mm) Rating Code (mm) (mm) Rating
Packs Packs
LSP40 40 6.1 5 3 1 LSP40L 40 6.1 4 3 1
LSP50 50 8.8 6 3 1 LSP50L 50 8.8 5 3 1
COMBINATION PADLOCKS
A key-less solution commonly used on SECURITY
luggage, tool boxes and storage lockers. RATING
IDEAL FOR: WEATHER

RATING
Luggage Toolboxes Storage

Lockers

Dials Qty
Packs
CP21 21 3.1 1 3 1
CP28 28 5 2 4 1
CP38 38 6 3 4 1
169
PADLOCKS & SECURITY SOLUTIONS PADLOCKS
BRASS PADLOCKS SECURITY

RATING
A durable medium security padlock used

for a variety of applications. WEATHER
RATING
IDEAL FOR:
Luggage Cabinets Sheds Gates
STANDARD SHACKLE LONG SHACKLE

Product Size Shackle Gauge Security Product Size Shackle Gauge Security
Keys Qty Keys Qty
Packs Packs
P30 30 5.2 3 3 1 P40L 40 6.3 4 3 1
P40 40 6.3 5 3 1 P50L 50 8.1 5 3 1
P40X2 40 6.3 5 3 2
P50 50 8.1 6 3 1
P60 60 9.5 7 3 1
BRASS PADLOCKS - KEY ALIKE

SECURITY
RATING
Set of four identical brass padlocks having the same key code so all four
keys enclosed will fit each lock within the pack. This is convenient where WEATHER
RATING
numerous locks are to be used by the same group of people or person.
A durable medium security padlock used for a variety of applications.
IDEAL FOR:
Luggage Cabinets Sheds Gates

Keys Qty
Packs
P40KA 40 6.3 5 4 4
BRASS RECTANGULAR PADLOCKS SECURITY

RATING
A high security padlock used for securing chain,
shuttering and catches where there is a risk of
WEATHER
cropping, hacksaw or hammer attacks. RATING
IDEAL FOR:
Chains Shutters Garages

Keys Qty
Packs
RP75 75 11.7 8 3 1
170
PADLOCKS PADLOCKS & SECURITY SOLUTIONS
ARMOURED RECTANGULAR PADLOCKS

A durable medium to high security SECURITY
padlock used for securing chain, RATING
shuttering and catches where there is
a risk of cropping or hacksaw attacks.
WEATHER
IDEAL FOR: RATING

Keys Qty
Packs
ARP90 90 12 9 3 1
STAINLESS STEEL PADLOCK

A high security stainless steel padlock designed to handle
extreme weather conditions. The shrouded shackle ensures
maximum resistance against cutting and prying. Ideal for
shutters, gates, garages and sheds
IDEAL FOR: SECURITY

RATING
WEATHER
RATING

Keys Qty
Packs
SS50SS 50 8 6 3 1
DISC PADLOCKS
A corrosion resistant medium to high security
padlock used for securing chain and catches SECURITY
where there is a risk of cropping attacks. RATING
IDEAL FOR:
WEATHER
RATING
Shutters Gates Garages Sheds

Keys Qty
Packs
DP70 70 9 8 3 1
171
PADLOCKS & SECURITY SOLUTIONS KEY CABINETS & SECURITY CHAINS
KEY CABINET KEY SAFE

Provides safe and easy Convenient and secure
storage of multiple keys. storage of keys. Solid and
Steel body with 20 hooks reinforced aluminium door
and a changeable 3 digit with concealed combination
combination dial. dial for improved weather
. resistance. Provides secure
and convenient key storage
for care workers, cleaners,
tradesmen and access to
holiday homes.
.
Product Size Box Carton Product Pack Box

Dials Hooks Dials
Code (inch) Qty Qty Code Qty Qty
Packs Packs
20KEYCAB 8 3 20 1 20 KEYSAFE 4 1 6
CABLE LOCK SECURITY

RATING
WEATHER
RATING
Protective vinyl coating to enhance corrosion resistance and scratch
prevention. Four dial combination gives multiple locking options.
IDEAL FOR:
Machinery Bicycles Ladders
Product Size Cable Gauge Security

Dials Qty
Packs
CL1000 1000 8 4 4 1
LOOPED CABLE SECURITY CHAIN

A weather resistant, braided steel security cable for A hardened steel security chain with anti-crop square
increased strength and flexibility. Ideal for securing links, covered with an anti-scratch nylon protective
gates, site machinery and ladders. sleeve.
SECURITY SECURITY
RATING RATING
WEATHER WEATHER
RATING RATING
IDEAL FOR: IDEAL FOR:
Machinery Gates Ladders Bicycles Machinery Bicycles Ladders
Product Size Cable Gauge Security Product Size Chain Gauge Security
Qty Qty
Packs Packs
LC1800 1800 10 6 1 SC1000 1000 8 8 1
LC3000 3000 15 7 1 SC1500 1500 8 8 1
SC200 2000 8 8 1
172
NOTES
173
NOTES
174
INDEX
MULTI-PURPOSE .......................................................... 133 SCREW HOOKS ................................................................ 55

A CHIMAERA .............................................................. 133 SQUARE CUP HOOKS .................................................. 55
ADAPTORS ........................................................ 154 LASER WELDED BLADE .................................. 133
ONE PIECE ....................................................................... 154 PREMIUM LASER WELDED BLADE .......... 133
SDS ..................................................................................... 154
TWO PIECE ...................................................................... 154
SINTERED BLADE................................................ 133
DIAMOND DRILL BITS ................................... 109
I
ANGLE BRACKETS .............................................. 95 IN-DEX ................................................................... 22
DOOR ACCESSORIES ...................................... 165
ARRIS RAIL BRACKETS ...................................... 99 INSULATION RETAINING CLIPS ...................... 98
ADJUSTABLE ROLLER CATCHES ........................ 165
AUGER BITS ...................................................... 111 INTERLOCKING WEDGES .............................. 102
BALES CATCHES ........................................................... 165
DOUBLE BALL CATCHES ........................................ 166
DOUBLE ROLLER CATCHES .................................. 166
B KNOCK DOWN BLOCKS .......................................... 166
MAGNETIC CATCHES................................................ 166
J
BLACKJAX ............................................................ 18 JIGSAW BLADES .............................................. 136
MODESTY BLOCKS ..................................................... 166 METAL
BLACKSMITHS DRILLS ................................... 116
PVC DOOR STOPS....................................................... 167 HIGH CARBON STEEL BLADES .................. 140
BONDED ABRASIVE DISC ............................. 135
PVC DOOR WEDGES ................................................. 167 PREMIUM BI-METAL BLADES ..................... 142
BRAD POINT WOOD BITS ............................. 110
SPRING DOOR STOPS .............................................. 167 WOOD
BROACHING CUTTERS .................................. 117
TUBULAR LATCHES .................................................... 165 HIGH CARBON STEEL BLADES .................. 136
DOWTY TYPE WASHER ..................................... 35 PREMIUM BI-METAL BLADES ..................... 139
DRILL SETS ............................................... 125, 126 JOBBER DRILLS ................................................ 112
C DRIVER BITS COBALT .............................................................................. 112
C2.............................................................................. 9 S2 ..................................................................................... 151 M2 FULLY GROUND ........................................ 113, 115
C2 CLASSIC ........................................................................... 9 SETS .......................................................................... 152, 153 ROLL FORGED ............................................................... 114
C2 DECKING ...................................................................... 21 V5 IMPACT ....................................................................... 150
C2 EXTERIOR ..................................................................... 11 DROP IN ANCHORS ........................................... 69
C2 FLOORING ................................................................... 10
C2 TONGUE FIX ............................................................... 11
DRY DIAMOND CORE BITS ........................... 131
ACCESSORIES ................................................................ 132 K
C2 TRADE CASE ............................................................... 10 DRYWALL SCREWS ..................................... 26, 27 KEY CABINET .................................................... 172
CABLE LOCK ..................................................... 172 COARSE THREAD............................................................ 26 KEY SAFE ........................................................... 172
CABLE TIES ........................................................... 54 DENSE BOARD ................................................................. 27
CABLE TRAY BOLTS ............................................ 48 FINE THREAD .................................................................... 26
CARCASS SCREWS ............................................. 19
CARRIAGE BOLT ................................................. 46
REVERSE THREAD........................................................... 27
SELF-DRILL ......................................................................... 27
L
LOOPED CABLE ............................................... 172
CEILING ANCHORS ............................................ 64 SHARP POINT ................................................................... 27
CHEMICAL ANCHOR STUDS ........................... 72
CHUCKS .................................................... 123, 124
CIRCULAR SAW BLADES ............................... 147
E M
CLASSIC ................................................................ 12 MACHINE SCREWS ............................................ 38
EPDM WASHERS ................................................. 34 COUNTERSUNK ............................................................... 38
COACH SCREWS ................................................. 24
EXPRESS NAILS ................................................... 63 PAN HEAD ........................................................................... 38
COLLATED SCREWS ........................................... 28
EYES ....................................................................... 55 MASONRY DRILL BITS ................................... 108
CLASSIC STAINLESS...................................................... 28
SCREW EYES ...................................................................... 55 MASONRY HANGERS ........................................ 90
COARSE THREAD............................................................ 28
VINE EYES ............................................................................ 55 METAL CAVITY ANCHORS ............................... 61
FINE THREAD .................................................................... 28
FLOORING SCREW ........................................................ 28 METAL CONSTRUCTION SCREWS ................. 30
SELF-DRILL ......................................................................... 28 COMPOSITE PANEL....................................................... 32
SELF-DRILLING WING TIP.......................................... 28
CONE CUTTERS ............................................... 118
F CORRUGATED SHEET FIXINGS .............................. 35
DOWTY TYPE WASHER .............................................. 35
FENCING CLIPS ................................................... 99
CONNECTORS & BRACES .............................. 100 FILE CLEANING BRUSH ................................. 158 EPDM WASHERS ............................................................. 34
ANGLE BRACES ............................................................ 100 FIXING BANDS .................................................... 97 HEX HEAD COVER CAPS ........................................... 34
CORNER BRACES ......................................................... 100 FLAT WOOD BITS ............................................ 110 SELA COVER AND WASHER..................................... 35
CORNER PLATES .......................................................... 101 FORGED EYES ..................................................... 71 SELF-DRILLING SCREWS ........................................... 30
MENDING PLATES ...................................................... 100 FORGED HOOKS ................................................. 71 FOR HEAVY SECTION STEEL........................... 31
MIRROR PLATES ........................................................... 101 FRAME CRAMPS ................................................. 97 FOR LIGHT SECTION STEEL ............................ 30
STRETCHER PLATES ................................................... 101 SLASH POINT .................................................................... 32
TEE PLATES ...................................................................... 101 STITCHING SCREWS ..................................................... 31
WING TIP .............................................................................. 33
TIMBER CONNECTORS ............................................ 101
CORRUGATED SHEET FIXINGS ....................... 35 H METAL FRAMING SCREWS .............................. 36
COUNTERSINKS ............................................... 118 HACKSAWS ....................................................... 156 PANCAKE HEAD .............................................................. 36
3 FLUTE .............................................................................. 118 HACKSAW BLADES .................................................... 157 PAN HEAD ........................................................................... 36
DE-BURRING................................................................... 118 JUNIOR............................................................................... 156 WAFER HEAD .................................................................... 36
JUNIOR HACKSAW BLADES ................................. 157 METAL INSULATION FIXINGS ......................... 65
LARGE ................................................................................. 156 MINI TIMBER HANGERS ................................... 91
LIGHTWEIGHT ............................................................... 156
D MINI .....................................................................................156
MIRROR SCREWS ............................................... 19
MIXED SCREW PACKS ....................................... 20
DECKING SCREW HAMMER-IN FIXINGS........................................ 61 MIXED SCREW TRAYS ....................................... 20
CLASSIC DECKING SCREW....................................... 21 HEX HEAD COVER CAPS .................................. 34 MULTI-FIX BOLT.................................................. 68
SOLO DECKING SCREW ............................................. 21 HINGE CUTTERS .............................................. 110 MULTI-FIX RESIN ................................................ 73
DECKING SCREWS ............................................. 21 HINGED COVER CAPS ....................................... 19 MULTI-FIX SCREWS ........................................... 67
C2 DECKING SCREW .................................................... 21 HOLESAWS ....................................................... 128 CONCRETE SCREW ....................................................... 67
DIAMOND BLADES ......................................... 133 HOLESAW KITS ............................................................. 130 MASONRY SCREW ......................................................... 67
CERAMIC BLADES ....................................................... 134 HOOKS .................................................................. 55 MULTI-FUNCTIONAL HANGERS .................... 91
CUP GRINDING WHEEL ........................................... 135 PICTURE HOOK SET...................................................... 55 MULTI-PURPOSE DRILL BITS ....................... 108
MORTAR RAKING BLADES..................................... 134 ROUND CUP HOOKS ................................................... 55
175
INDEX
FORM C................................................................................. 51
N S PENNY/REPAIR ................................................................. 52
NAIL IN ANCHORS ............................................. 64 SANITARY FIXINGS ............................................ 56 SPRING .................................................................................. 52
NAIL PLATES ........................................................ 96 SCRATCH BRUSHES ........................................ 158 SQUARE PLATE ................................................................ 52
NAILS ..................................................................... 77 PLASTIC HANDLE........................................................ 158 WINDOW BOARD TIES ...................................... 98
ALUMINIUM....................................................................... 87 WOODEN HANDLE .................................................... 158 WINDOW FABRICATION SCREWS ................. 40
BRIGHT .................................................................................. 80 SCREW CAPS ....................................................... 19 BAYPOLE SCREWS ......................................................... 42
COPPER ................................................................................ 87 SCREW CUPS ....................................................... 19 CILL SCREWS..................................................................... 42
COPPER DISC RIVETS .......................................... 88 SDS MAX HAMMER BITS ............................... 107 ELEMENT SCREWS ........................................................ 42
COPPER STRAPS..................................................... 88 SDS MAX STEELS............................................. 107 FOR REINFORCED FRAMES ............................. 43, 44
FIRMAHOLD .............................................................. 77, 78 SDS PLUS HAMMER BITS .............................. 104 FOR UNREINFORCED FRAMES...................... 40, 41
BRAD ............................................................................ 78 SDS PLUS STEELS ............................................ 105 MACHINE SCREWS........................................................ 42
CLIPPED....................................................................... 77 SECURITY CHAIN ............................................ 172 REINFORCED FRAME SCREWS .............................. 42
FUEL CELLS ........................................................................ 79 SELA ....................................................................... 35 WEATHER BAR SCREWS ............................................. 42
GALVANISED ..................................................................... 83 SELF-TAPPING SCREWS ................................... 37 WIPES ................................................................. 163
MASONRY ........................................................................... 88 COUNTERSUNK ............................................................... 37 WIRE BRUSHES ..................... 119, 120, 121, 122
POLYMER HEADED ....................................................... 79 FLANGE HEAD ................................................................. 37 NYLON................................................................................ 120
SHERARDISED .................................................................. 86 PAN HEAD ........................................................................... 37 WIRE HAND BRUSHES ................................... 158
NUTS ...................................................................... 50 SETS ................................................................ 48, 49 WIRE HANGERS .................................................. 64
HEX CONNECTOR NUT .............................................. 50 SHIELD ............................................................... 163
HEX DOME NUT .............................................................. 51 PROTECTIVE FILMS .................................................... 163
HEX FULL............................................................................. 50 WIPES .................................................................................. 163
HEX SERRATED FLANGE ............................................ 50 SHIELD ANCHORS ............................................. 70
NYLON INSERT NUTS (TYPE P) .............................. 50 SHIMS ................................................................. 102
NYLON INSERT NUTS (TYPE T) .............................. 50 SOCKET DRIVERS ............................................ 154
WING NUT .......................................................................... 51 SOLO WOODSCREWS ....................................... 15
NYLON FIXINGS .................................................. 66 SOLO DECKING SCREW ............................................. 21
FRAME ANCHORS.......................................................... 66 SPEED PLUGS ...................................................... 60
FRAME FIXINGS ............................................................... 66 SPRING TOGGLES............................................... 60
HAMMER FIXINGS ......................................................... 66 STEP DRILLS ..................................................... 118
NYLON PLUGS ..................................................... 24 STUB DRILLS..................................................... 116
P T
PACKERS ............................................................ 102 TAPE .................................................................... 160
PADLOCKS......................................................... 169 ALUMINIUM FOIL TAPE ........................................... 162
ARMOURED .................................................................... 171 ANTI-SLIP TAPE ............................................................. 161
BRASS ................................................................................. 170 BARRIER TAPE ................................................................ 161
BRASS RECTANGULAR............................................. 170 CLOTH TAPE .................................................................... 160
COMBINATION.............................................................. 169 HAZARD TAPE ............................................................... 161
DISC ..................................................................................... 171 HIGH STRENGTH PVC BUILDERS TAPE.......... 162
LAMINATED .................................................................... 169 MASKING TAPE ............................................................. 160
STAINLESS STEEL......................................................... 171 PACKAGING TAPE ........................................................ 161
WEATHERPROOF ......................................................... 169 PVC INSULATION TAPE ............................................ 162
PIPE CLIPS ............................................................ 58 TAPE MEASURE ................................................ 157
PLASTIC INSULATION FIXINGS ...................... 65 TCT TILE & GLASS BITS .................................. 109
PLASTIC PLUGS .................................................. 63 THREADED BAR .................................................. 72
PREMIUM BI-METAL BLADES ...................... 139 THROUGHBOLTS ................................................ 69
PROTECTIVE FILMS ........................................ 163 TIMBER HANGERS.............................................. 92
TIMBER SCREWS................................................. 22
HEAVY DUTY ..................................................................... 23
R IN-DEX ................................................................................... 22
TRUSS CLIPS ........................................................ 95
REBAR CUTTERS .............................................. 106
TWIN-THREADED WOODSCREWS ................ 17
RECIPROCATING SAW BLADES ................... 143
HIGH CARBON STEEL ............................................... 143
METAL
BI - METAL ............................................................... 145 U
WOOD UNIVERSAL FRAMING ANCHOR .................... 96
BI - METAL ............................................................... 144
RESIN ..................................................................... 73
RESIN ACCESSORIES ......................................... 75
BLOW-OUT PUMP ......................................................... 75
V
VELOCITY ............................................................... 8
HOLE CLEANING BRUSHES ..................................... 75
INTERNALLY THREADED SOCKETS..................... 75
MIXING NOZZLES .......................................................... 75
PLASTIC SLEEVES ........................................................... 75
RESIN GUNS......................................................... 74
W
WALL STARTER KITS .......................................... 99
RESTRAINT STRAPS ........................................... 93 WALL TIES ............................................................ 98
HEAVY .................................................................................... 93 WASHERS ............................................................. 51
LIGHT ..................................................................................... 94 FORM A ................................................................................ 51
ROOFING BOLT ................................................... 47 FORM B ................................................................................. 51
176
TECHNICAL FIXINGS SOLUTIONS LTD
YOUR FIRST CALL FOR TECHNICAL ADVICE & FIXINGS SOLUTIONS
TRAINING
ON SITE PULL TESTING TO CFA STANDARD BS 8539
QUALITATIVE FACE FITTING
ABRASIVE WHEEL TRAINING
Units 2 -12
Invicta Business Park
London Road Wrotham
Sevenoaks
Kent
TN15 7RJ
Tel: +44 (0)1732 885675

Fax: +44 (0)1732 884543
Email: [email protected]

TFS Brochure

Uploaded by

Copyright:

Available Formats

TFS Brochure

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TFS Brochure

Uploaded by

Copyright:

Available Formats

SUPPLIER OF

BUILDERS METAL WORK,

TIMBER CONSTRUCTION SCREWS 07 - 24

DRYLINING CONSTRUCTION SCREWS 25 - 28

METAL CONSTRUCTION SCREWS 29 - 38

WINDOW FABRICATION SCREWS 39 - 44

NUTS, BOLTS, SETS AND WASHERS 45 - 52

FIXINGS AND FASTENERS 53 - 58

CONCRETE AND MASONRY FIXINGS 62 - 75

COLLATED AND LOOSE NAILS 76 - 88

BUILDERS METAL WORK 89 - 102

DRILLING 103 - 126

CUTTING 127 - 148

DRIVER BITS 149 - 154

HAND TOOLS 155 - 158

ADHESIVE TAPES AND PROTECTIVE FILMS 159 - 163

DOOR ACCESSORIES 164 - 167

LOCKS AND SECURITY SOLUTIONS 168 - 172

POZI / CROSS RECESS TIM DRIVE RECESS

PHILLIPS RECESS SQUARE RECESS /

COUNTERSUNK HEAD BUGLE HEAD

DOUBLE COUNTERSUNK PAN / ROUND HEAD

DOUBLE COUNTERSUNK WAFER / FLANGE HEAD

SHALLOW PAN HEXAGON HEAD

COARSE THREAD (up to 16 TPI) TWIN THREAD

FINE THREAD (over 16 TPI) HI-LO THREAD

SELF TAPPING THREAD

NEEDLE / GIMLET AND SELF DRILL POINT

B POINT TYPE 17 POINT

GAUGE MEASURING LENGTH

Metric PAN / ROUND WAFER / FLANGE HEXAGON

TPI - THREADS PER INCH

METRIC/IMPERIAL SIZE COMPARISON CHART

1/64” 0.40 13/16” 20.64

PLATING & FINISH GUIDE

STONE HOLLOW BLOCK REINFORCED HARD CONCRETE KERBS/SLABS CONCRETE VITRIFIED

REBAR STEEL ALUMINIUM NON- STAINLESS CAST IRON THIN SHEET

Premium multi-use screw

VELOCITY - TIM DRIVE - Yellow

Product Size Size Product Size Size

Boxes (Driver bit included) Boxes (Driver bit included)

C2® CLASSIC Materials

C2 CLASSIC® TRADE CASE Materials

Product Size Size

Trade Case - Qty 1,800

C2® FLOORING & MDF Materials

Twin cut flooring screw

C2 FLOORING & MDF SCREW

Tubs (T20 driver bit included)

C2® EXTERIOR Materials

Twin cut exterior screw

Tubs (V5 impact bit included)

C2® TONGUE-FIX Materials

Twin cut flooring screw

Tubs (T10 driver bit included)

Single cut multi-purpose screw

Product Size Size

40070CLAF 4.0 x 70 8 x 2¾ 200

CLASSIC PAN HEAD - Yellow CLASSIC - Zinc (CR3)

The Classic multi-purpose screw with pan head for