Conveyor Price Guide: 304 SS Surfaces, FDA/Food Grade Approved
Conveyor Price Guide: 304 SS Surfaces, FDA/Food Grade Approved
Conveyor Price Guide: 304 SS Surfaces, FDA/Food Grade Approved
The table above is for guidance ONLY. Configurations are based on transferring a dry, free-flowing product with the following assumed properties: Bulk density of 40 lbs./ft3; particle size
of not less than 20 micron. Transfer distance not to exceed a vertical lift of approx. 30% of total run with two of bends. Inclined lifts are not acceptable.
All prices shown include the PPT-R/S timer control unit, Aluminum Actuator & EPDM/NBR seals – standard specification. Pressure Regulator, Mounting Bracket, and Maintenance Kit
(gages and remote start) are also included in the pricing. piFLOWf Food Grade Models are available for approximately $500 additional (model dependent).
Price estimates are for year 2018; a firm quotation against a specific application using the above cannot be offered.
- CONFIDENTIAL - 2018
Conveyor Price Guide
Polished SS 316L Surfaces, Highest Flow Rates, Greatest Selection of Configurations and Controls
75
RS.ASS.0.US RS.ASS.0.US .RS.ASS.0.US .RS.ASS.0.US .RS.ASS.0.US A.RS.ASS.0.US Piab
ft.
$15,750 $16,500 $21,000 $25,800 $32,000 $42,100
P.P200.TX4.51.3.CA. P.P200.TX4.51.7.CA. P.P400.TX4.76.14.CA P.P600.TX4.76.14.CA P.P120L.TX6.76.33.CA P.P160L.TX6.102.56.C P.P160L.P6.102.56.C
50
RS.ASS.0.US RS.ASS.0.US .RS.ASS.0.US .RS.ASS.0.US .RS.ASS.0.US A.RS.ASS.0.US A.RS.ASS.0.US
ft.
$15,750 $16,500 $21,000 $22,700 $31,500 $40,700 $42,100
P.P100.TX2.38.3.CA. P.P100.TX2.38.7.CA. P.P200.TX4.51.7.CA. P.P400.TX4.76.14.CA P.P600.TX4.76.33.CA. P.P120L.TX6.76.33.CA. P.P120L.P6.76.56.CA.
25
RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US .RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US
ft.
$14,750 $15,500 $16,500 $21,000 $23,300 $31,500 $39,800
P.P64.P0.25.2.CA.RS P.P100.TX2.38.3.CA. P.P200.TX4.51.7.CA. P.P200.TX4.51.7.CA. P.P400.TX4.76.14.CA. P.P60L.PR6.76.33.CA. P.P80L.PR6.76.33.CA.
10
.ASS.0.US RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US RS.ASS.0.US
ft.
$12,500 $14,750 $16,500 $16,500 $21,000 $24,700 $26,800
250 lb/hr 500 lb/hr 1,000 lb/hr 2,500 lb/hr 5,000 lb/hr 7,500 lb/hr 10,000 lb/hr
Material Transfer Rate (lbs/hr)
The table above is for guidance ONLY. Configurations are based on transferring a dry, free flowing
product with the following assumed properties: Bulk density of 40 lbs./ft3; particle size of not less than 20
micron. Transfer distance not to exceed a vertical lift of approx. 30% of total run with two of bends.
Inclined lifts are not acceptable.
All prices shown include the PPT-R/S timer control unit, Stainless Steel Actuator & NBR seals – standard
specification. Pressure Regulator, Mounting Bracket, and Maintenance Kit (gages and remote start) are
also included in the pricing. Price estimates are for year 2018; a firm quotation against a specific
application using the above cannot be offered.
- CONFIDENTIAL - 2018
Feeding & Mounting Accessories
Stainless Steel Aspirated Feed Wands
Available in Tubing or Tri-Clover Connections Stainless Steel Feed Station with Feed Adapter
Price Range: $400 to $1800 1.0inch to 4.0 inch Tubing or Tri-Clover Connections
FDA Approved Nitrile or Silicone Seals, 304 or 316L SS
Options: Covers, Casters, Fluidization, Level Controls, Additional
Volume Modules, Sight-Glasses
Price Range: $2000 to $9000
In addition, there is an almost unlimited number of discharge cone configurations with bends, elbows to mate to custom fittings.
Prices for these types of assemblies can vary depending on material grade and design. Contact Piab for custom transitions.
- CONFIDENTIAL - 2018