Scribd
Upload
85 views2 pages

Nunchuck Maps

This document describes 8 different button configurations that can be selected for a Wii remote controller by pressing button 2 in combination with other buttons. It provides details on how to select a configuration and enable or disable the infrared sensor for each one. The full button mappings are then listed for each configuration, including what buttons are assigned to what in-game actions.

Uploaded by

Christopher Philbert Hartany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
85 views2 pages

Nunchuck Maps

This document describes 8 different button configurations that can be selected for a Wii remote controller by pressing button 2 in combination with other buttons. It provides details on how to select a configuration and enable or disable the infrared sensor for each one. The full button mappings are then listed for each configuration, including what buttons are assigned to what in-game actions.

Uploaded by

Christopher Philbert Hartany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Available Configs:

------------------
(2) = Naggers alt (default) //conveniant for most games uses c+Dpad as c-stick
(2 + plus) = Naggers config //uses tilt as c-stick
(2 + minus) = Troopage config //handy in many situations
(2 + Left) = Abz general config //for arcade games or games that require few
buttons
(2 + right) = Howards general config //matching button names to action
(2 + up) = racing 1 //for games that use AnalogR and AnalogL for gas and break
(2 + down) = racing 2 //for games that require A held for gas

You can select configs and enable/disable IR by:


------------------------------------------------
press button_2 (puts in config mode and turns IR off)
press config button (selects the desired config - skip this step for the default)
release the config button (keep holding button_2)
press button_Z (turns IR on or off for the just selected config. If the wiimotes is
pointed at the screen you can see IR toggle on and off if the screen accepts cStick
input. )
release button_Z
release button_2 (ends configuration)

Full button mapping:


--------------------
Home = Start/Pause in all configs
(2+1) = Exit to Loader or HBC in all configs
--------------------------------------------
Press (2 or 2&Z) = Alt-Naggers or Shooters
//A=A B=R Z=L (+ or c+B=R1/2) (- or c+Z=L1/2)
//C not pressed U=Z D=B R=X L=Y B=R Z=L
//C pressed Dpad=controls cStick Z=1/2L B=1/2R
//B pressed DPAD=Standard
Press (2&Z) to to enable/disable IR

Press (2 & plus) = Naggers


//same as Alt-naggers with tilt as C-STICK with C button held and C+DPAD as
GC-DPAD

Press (2 + minus � Z) = Troopage config (add (Z) to to enable IR as c-stick) (add


(Z) to enable IR as c-stick)
//A=A
//C not pressed +=X -=B Z=L B=R Dpad=cStick
//C pressed +=Y -=Z Z=1/2L B=1/2R Dpad=Standard

Press (2 + Left � Z) = Abz general config


//A=A B=B C=X Z=Y -=Z +=R Dpad=Standard

Press (2 + right � Z) = Howards general config


//A=A B=B Z=Z +=X -=Y Dpad=Standard
//C not pressed L R tilt tied to L R analog triggers.
//C pressed tilt control the cStick

Press (2 + up � Z) = racing games that use AnalogR and AnalogL for gas and break
//A=A B=B Z=Z +=X -=Y Dpad=Standard
//C not pressed backwards forward tilt tied to L R analog triggers.
//C pressed tilt control the cStick

Press (2 + down � Z) = racing games that require A held for gas


//A=Z B=B Z=A +=X -=Y Dpad=Standard
//C not pressed L R tilt tied to L R analog triggers.
//C pressed tilt control the cStick

You might also like