Scribd
Upload
118 views21 pages

Operation Manual of Radius-20170805

The document provides information on the performance parameters, operation, emergency response procedures, and maintenance of an unmanned aerial vehicle. It lists the wingspan, weight, speed, range, endurance, wind resistance, camera specifications, battery parameters, and software used for data processing. It outlines pre-flight inspection steps, flight plan procedures, and emergency responses such as switching flight modes or returning to home. Maintenance items include inspecting the pitot tube, propeller, control surfaces, servos, UV lens, charging cables, batteries, and balance charger.

Uploaded by

Marcos Higuera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views21 pages

Operation Manual of Radius-20170805

The document provides information on the performance parameters, operation, emergency response procedures, and maintenance of an unmanned aerial vehicle. It lists the wingspan, weight, speed, range, endurance, wind resistance, camera specifications, battery parameters, and software used for data processing. It outlines pre-flight inspection steps, flight plan procedures, and emergency responses such as switching flight modes or returning to home. Maintenance items include inspecting the pitot tube, propeller, control surfaces, servos, UV lens, charging cables, batteries, and balance charger.

Uploaded by

Marcos Higuera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

Performance Parameters

Hand-launch Gestures

Pre-flight Inspection

Flight Plan

Emergency Response

Inspection & Maintenance


Performance Parameters
Wingspan 92cm

Takeoff weight 980g

Cruising speed 40-70km/h

Communication
3-5km
range
Endurance 85min

Wind resistance Force 6 wind

Camera Parameters SONY WX220 18,200,000 pixels


Battery parameters 18650 3S2P 11.1v
Data processing
PIX4D
software
Package dimensions 1.1*0.65*0.3m
Gross weight (Incl.
< 17KG
Package)
Hand-launch Gestures
Pre-flight Inspection

Whether the airframe Whether the pitot tube is Conditions of Whether the servo
and wings are damaged. blocked. propeller and safety. works properly.

Throttle mid Camera photo-taking Check wind direction Pay attention to air
check and wind force when takeoff obstacles when takeoff
Voltage : 12.6V GPS : 12 (0.9) Airspeed: 0-3m/s Mode switch SG: Manual/FBWA/RTL

Compass pointing Compass Attitude error: 1-2 degrees Barometric altitude


calibration
Flight Plan

Turn on the Data Link and Connect the battery Cover the lid
connect it to the computer
Click “CONNECT” Waiting for GPS positioning Click “Home”

Click “Draw” Click “Gen WPs” Set flight altitude,


check “Advanced”
Click “Mission Option”， Click “Done” Click “Cal RWP”
set overlap and sidelap

Click “Send WPs” Manual mode Click “Start”


Click “Dis/Arm” to arm the aircraft
Prohibit to touch the flight mode switch
Hand launch
SG during the flight

Refer to instructions Landing and recovery Click “DISCONNECT”


for remote controller
Extract data Prepare USB cable

Connect aircraft to computer Click “CONNECT” Download Logs → “Logs”


Click “Download selected log”, clear logs after finish. Click “POS”

Click “Browse Logs”, choose to download to the folder


Select “RelAlt”, click “Export POS”
named LogFiles in disk C (GCS was installed in the disk C,
so there will generate a default folder in disk C)
Check “Process Image” Click “Pre-process”

Click “GeoTag Images” Generate geotagged files


Information read-in successfully
Emergency Response

e- Man ual
TL- Stabiliz
R

2. Switch to Return or Landing


1. Switch flight modes by remote mode in GCS
controller
Inspection & Maintenance

Check whether the pitot tube is blocked. Damaged propeller and motor vibration.
Whether control surface is damaged. Whether the servo works properly.
Whether UV lens is scratched.
E4 - Charging cable - Power cord Plug in charging cable
Plug in power cord Connect battery - Plug in the balance charger connector
Type of battery: LiPo
Green LED: charging finished
Current: 2A
Red LED: charging

You might also like