Sanitary

Hose &
Fittings

Designed for use in High-Purity and Sanitary Environments

 Page Description
3 Assembly Types Radial Crimp, Molded, Reusable

4 R- Series FDA/3-A - Rubber Hose

5 R- Series FDA/3-A - Rubber Hose

6 R- Series FDA/3-A - Rubber Hose

7 F- Series FDA - Food Grade Hose

8 T- Series Fluoropolymer Lined Hose

9 T- Series Fluoropolymer Lined Hose

Ace Sanitary, Inc., formerly a division of the 10 S- Series Silicone Hose

Ace Manufacturing Company was formed in 11 S- Series Silicone Hose

2004 to develop new business relationships. 12 A- Series Specialty Tubing

Initial product offerings were the Flex-Rite™ 13 P- Series PVC Hose

Sanitary Hose Line and Seal-Rite™ Hose 14 I- Series Industrial Hose (Washdown & Steam)

Fittings. These products are now the core of 15 Specialty Molded, Jacketed Hose

our expanded product line. We work hard to know 16 Molded Assembly Types & Ordering

your business, assist you in problem solving, 17 ReUseables Assembly Types & Ordering

provide you with quality products and over 18 Measurement & End Styles

100 years of experience. 19 Assembly Part Number and Ordering

20 General Hose Installation Information

21 Definitions Industry Recognized Terms

22 Accessories Hose Supports, Bumpers

23 Accessories Molded Labels,Racks, Custom Fab

24 Equipment Testing, Production, Marking

25 Equipment Washdown, Crimpers

26 Product Selection Cautionary/Warranty Statement

Visit acesanitary.com for new additions 27 Sizing Fitting Specifier (Actual Size Drawings)

and most up-to-date product information 28 Data Sheets Product PDFs Available Online

2 ©Ace Sanitary, Inc. 604

 Radial Crimp
Rubber, Silicone, PVC & Fluoropolymer Lined Hoses
360° Gasket Seal Seal-Rite™ radial crimp couplers are the
Stem to Hose Ferrule
Eliminates bacteria entrapment purest unitized assemblies available today.
growth areas
Our external crimp design provides a 360°
Contoured Edges fixed seal at the coupler stem to hose
Provides safety for worker
and plumbing ease
junction point that eliminates the possibility
Exclusive TwistLOC™ of product wicking between the hose and
Components guaranteed not to separate
Pat. No. 7380837 coupler. Unlike internal expansion which
High Grade 316L Material can deform metal and yield die impressions,
Chemical resistant
radial crimp technology will not interfere
Quality Workmanship with the internal surface of the coupling
Superior internal surface, 15 Ra
stem. A full flow smooth bore transition is
Deep Barb Serrations created after fabrication that eliminates
Prevents blow-off
ledges or crevices that can collect bacteria.
Radial Crimp
No internal die impressions
TwistLOC™ components become a single
Date, Part, Serial & Heat Numbers
Laser etched for permanent unit that resist separation under severe
identification, traceability and
assemble date applications. Internal surface finishes of
(customized etching available)
15 Ra or better. Each coupling stem is
3-A, 62-02 LISTED* manufactured from 316L grade stainless
Highest sanitary standards compliant
steel and laser etched with a material
Full Flow Smooth Bore
Obstruction free connection traceability number which is our commitment
CIP - COP - SIP suitable
to quality. Seal-Rite radial crimped couplers
ISO 9001: 2015 REGISTERED are available for attachment on Flex-Rite™
ACCEPTED BY : USDA Dairy hoses. A wide range of end styles, sizes 1/4"
COMPLIANCE : ASME BPE 2014, FDA Grade “A” PMO through 6" are available.

Molded
Ends
Reusuable
Sanitary Fitting

Detailed information on both these products can be found on page 16 and 17.
*The 3-A 62-02 standard applies only to assemblies of 3/4" diameter and larger 3
 R - Series Rubber Hose
RDC Discharge WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RDC150 11/2" 2.07" 250 PSI - .98 lbs. - 100'
RDC200 2" 2.59" 250 PSI - 1.38 lbs. - 100'
RDC250 2 1/2" 3.11" 250 PSI - 1.78 lbs. - 100'
This lightweight discharge hose provides extra
flexibility and smooth handling. (Meets 3-A* TUBE White, FDA, 3-A*, Chlorobutyl COVER Blue EPDM w/white stripe
standards, USDA requirements and is FDA REINFORCEMENT Spiral-plied synthetic fabric TEMP. RANGE -40 to 225° F
RECOMMENDED CLEANING CIP, COP
compliant). Designed to be chemically resistant to
mild caustic solutions. This discharge hose is well
suited for overhead CIP wash units and capable
of handling pressures up to 250 PSI.
WORKING MIN. BEND WEIGHT VAC.
RES High Temperature Suction & Discharge MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RES050 1/2" .94" 150 PSI 2.5" .23 lbs. 29" 130'
RES075 3/4" 1.22" 150 PSI 3.7" .31 lbs. 29" 130'
RES100 1" 1.46" 150 PSI 4.0" .39 lbs. 29" 130'
RES150 11/2" 2.00" 150 PSI 5.0" .80 lbs. 29" 130'
This premium quality hose withstands rough RES200 2" 2.52" 150 PSI 6.0" 1.16 lbs. 29" 130'
handling and high temperatures and harsher RES250 21/ 2" 3.17" 150 PSI 7.0" 1.70 lbs. 29" 130'
chemical environments. A suction and discharge RES300 3" 3.70" 150 PSI 8.5" 1.96 lbs. 29" 130'
hose that will not impart taste or odor to products
being transferred. (Meets 3-A* standards, USDA TUBE White, FDA, 3-A*, EPDM COVER Blue EPDM Synthetic Rubber
requirements and is FDA compliant). Typical use REINFORCEMENT Two polyester spirals with dual wire helix TEMP. RANGE -40 to 300° F
RECOMMENDED CLEANING CIP, SIP, Autoclave
includes: Non-Oily, Milk, Dairy, Food and Beverage, Note: EPDM not recommended for use with petroleum based fluids
Chemical, Pharmaceutical and CIP Applications.

RCR Crush Resistant WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RCR150 11/2" 2.11" 250 PSI 4.0" .98 lbs. 27" 100'
RCR200 2" 2.68" 250 PSI 7.0" 1.38 lbs. 27" 100'
RCR250 2 1/2" 3.21" 250 PSI 10.0" 1.78 lbs. 27" 100'
Consistent flow is maintained by this crush RCR300 3" 3.85" 250 PSI 12.0" 2.59 lbs. 27" 100'
resistant hose whether kinked, twisted or run RCR400 4" 4.85" 250 PSI 15.0" 3.44 lbs. 27" 100'
over. It’s designed with a monofilament helix to
spring back to its original shape. (Meets 3-A* TUBE White, FDA, 3-A*, Chlorobutyl COVER Orange EPDM w/white strip
REINFORCEMENT Spiral-plied synthetic fabric with monofilament helix TEMP. RANGE -30 to 225° F
standards, USDA requirements and is FDA compliant). RECOMMENDED CLEANING CIP, COP
Excellent for high traffic areas, the RCR delivers
generous flow rates for wine, beer and other
sanitary liquid food stuffs. Bacteria resistant
construction delivers taste and odor free flow.
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RCR-C Crush Resistant - Grounded
RCR-C150 11/2" 2.11" 250 PSI 4.0" .98 lbs. 27" 100'
RCR-C200 2" 2.68" 250 PSI 7.0" 1.38 lbs. 27" 100'
CALL FACTORY FOR 2-1/2” SIZE INFORMATION
RCR-C300 3" 3.85" 250 PSI 12.0" 2.59 lbs. 27" 100'
RCR-C is designed with the same rugged TUBE White, FDA, 3-A*, Chlorobutyl COVER Orange EPDM w/white strip
construction as our standard crush resistant REINFORCEMENT Spiral-plied synthetic fabric with monofilament helix & copper wire TEMP. RANGE -30 to 225° F
RECOMMENDED CLEANING CIP, COP
hose. We’ve added a layer of protection for
those applications where static discharge is a ALL R-Series hose products meet/comply: USDA Class III requirements, FDA CFR Title 21.1772600, 3-A 18-03
concern. (Meets 3-A* standards, USDA requirements *The 3-A 62-02, standard applies only to assemblies of 3/4" diameter and larger.
and is FDA compliant). This versatile hose has two WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature).
multi-strand, copper wires to provide positive Working pressure and vacuum ratings will decrease as temperatures increase. For “R” series applications that
grounding and peace of mind. exceed 200° F contact manufacturer for suggestions.

4
 R - Series Rubber Hose
RSD Suction & Discharge GRAY WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RSD050 1/2" 1.00" 150 PSI 2.0" .32 lbs. 29" 100'
RSD075 3/4" 1.25" 150 PSI 2.0" .57 lbs. 29" 100'
RSD100 1" 1.50" 150 PSI 3.0" .91 lbs. 29" 100'
Versatility makes this hose our most popular RSD150 11/2" 2.06" 150 PSI 4.0" 1.03 lbs. 29" 100'
choice for product transfer and CIP applications. RSD200 2" 2.57" 150 PSI 4.5" 1.32 lbs. 29" 100'
(Meets 3-A* standards, USDA requirements and is
FDA compliant). Rated for full suction and RSD250 2 1/2" 3.12" 150 PSI 5.5" 1.84 lbs. 29" 100'
discharge use up to 150 PSI. The specially RSD300 3" 3.74" 150 PSI 7.0" 2.55 lbs. 29" 100'
compounded tube is engineered to handle high RSD400 4" 4.77" 150 PSI 10.0" 5.51 lbs. 29" 100'
temperatures, will not impart taste or odor and is RSD600 6" 6.75" 150 PSI 22.0" 5.42 lbs. 29" 100'
highly resistant to common CIP solutions. A dual TUBE White, FDA, 3-A*, Chlorobutyl COVER Gray, EPDM w/white stripe
wire helix makes the RSD extremely flexible and REINFORCEMENT Spiral-plied synthetic fabric with dual wire helix TEMP. RANGE -40 to 225° F
easy to handle. RECOMMENDED CLEANING CIP, COP COLORS AVAILABLE Consult Factory

WORKING MIN. BEND WEIGHT VAC.

RSD Suction & Discharge BLUE MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RSDB150 11/2" 2.06" 150 PSI 4.0" 1.03 lbs. 29" 100'
RSDB200 2" 2.57" 150 PSI 4.5" 1.32 lbs. 29" 100'
RSDB250 21/2" 3.12" 150 PSI 5.5" 1.84 lbs. 29" 100'
RSDB300 3" 3.74" 150 PSI 7.0" 2.55 lbs. 29" 100'
Product Description same as RSD Gray TUBE White, FDA, 3-A*, Chlorobutyl COVER Blue, EPDM w/white stripe
REINFORCEMENT Spiral-plied synthetic fabric with dual wire helix TEMP. RANGE -40 to 225° F
RECOMMENDED CLEANING CIP, COP COLORS AVAILABLE Consult Factory

RSD Suction & Discharge RED WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RSDR150 11/2" 2.06" 150 PSI 4.0" 1.03 lbs. 29" 100'
RSDR200 2" 2.57" 150 PSI 4.5" 1.32 lbs. 29" 100'
RSDR250 21/2" 3.12" 150 PSI 5.5" 1.84 lbs. 29" 100'
Product Description same as RSD Gray RSDR300 3" 3.74" 150 PSI 7.0" 2.55 lbs. 29" 100'
TUBE White, FDA, 3-A*, Chlorobutyl COVER Red, EPDM w/white stripe
REINFORCEMENT Spiral-plied synthetic fabric with dual wire helix TEMP. RANGE -40 to 225° F
RECOMMENDED CLEANING CIP, COP COLORS AVAILABLE Consult Factory

RCT Comestible Transfer

WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RCT100 1" 1.50" 150 PSI 3.5" .95 lbs. 29" 100'
RCT150 11/2" 2.13" 150 PSI 4.0" 1.10 lbs. 29" 100'
Excellent choice for edible oils, and personal RCT200 2" 2.64" 150 PSI 4.5" 1.45 lbs. 29" 100'
care products as well as most dairy applications. RCT250 21/2" 3.19" 150 PSI 6.0" 1.90 lbs. 29" 100'
(Meets 3-A* standards, USDA requirements and is RCT300 3" 3.76" 150 PSI 7.0" 2.68 lbs. 29" 100'
FDA compliant). Rated for full transfer use up to
150 PSI, Nitrile hose is engineered to handle high RCT400 4" 4.77" 150 PSI 10.5" 3.54 lbs. 29" 100'
temperatures and maintain product color, taste TUBE White, FDA, 3-A*, Nitrile COVER White Nitrile w/white stripe
REINFORCEMENT Spiral-plied synthetic fabric with dual wire helix TEMP. RANGE -25 to 250° F
and aroma. A dual wire helix makes the RCT RECOMMENDED CLEANING CIP, COP
extremely flexible and easy to handle.

For quickest response, send ALL requests ALL R-Series hose products meet/comply: USDA Class III requirements, FDA CFR Title 21.1772600, 3-A 18-03
*The 3-A 62-02, standard applies only to assemblies of 3/4" diameter and larger.
for quotes and purchase orders to: WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature).
[email protected] Working pressure and vacuum ratings will decrease as temperatures increase. For “R” series applications that
exceed 200° F contact manufacturer for suggestions.

5
 R - Series Rubber Hose
RBT Beverage Transfer WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RBT100 1" 1.69" 250 PSI 4.0" .81 lbs. 20" 100'
RBT150 11/2" 2.23" 250 PSI 5.5" 1.20 lbs. 20" 100'
RBT200 2" 2.92" 250 PSI 6.5" 1.86 lbs. 20" 100'
A heavy-duty discharge hose with suction RBT300 3" 4.09" 250 PSI 10.0" 3.57 lbs. 20" 100'
capability is ideal for the highly demanding
service of transferring liquid products in TUBE White, FDA, 3-A*, Chlorobutyl COVER Purple EPDM w/white stripe
REINFORCEMENT Spiral-plied synthetic fabric 4 plies1.5"- 6 plies 2" & over TEMP. RANGE -40 to 225° F
breweries, wineries and dairies. (Meets 3-A* RECOMMENDED CLEANING CIP, COP
standards, USDA requirements and is FDA compliant).
Bounce back design resists damage from kinking
or flattening in high traffic areas.
in
Now Stocked
e
RWD Washdown W i Blulo
Ye WORKING MIN. BEND WEIGHT VAC.
Black
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RWD075 3/4" 1.35" 300 PSI - .41 lbs. - 200'
RWDB075 3/4" 1.35" 300 PSI - .41 lbs. - 200'
RWDBK075 3/4" 1.35" 300 PSI - .41 lbs. - 200'
This premium washdown hose is designed for RWDY075 3/4" 1.35" 300 PSI - .41 lbs. - 200'
cleanup duties in non-oily applications, dairies,
creameries, breweries, food, beverage, meat and TUBE White, FDA, 3-A*, EPDM COVER White EPDM w/white stripe
poultry processing plants. This premium quality REINFORCEMENT Spiral-plied synthetic fabric 4 piles Custom Colors Available
RECOMMENDED CLEANING CIP, COP TEMP. RANGE -40 to 275° F
hose is capable of handling hot water up to 300° Note: EPDM not recommended for use with petroleum based fluids
F. (Meets 3-A* standards, USDA requirements and is
FDA compliant). A chemically r e s i s t a n t h o s e , See page 14 for additional washdown options.
w i t h a w r a p p e d c o v e r construction designed
to provide excellent resistance to cuts and
abrasion while providing handling stability.
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
RWS-L Wine & Spirits - Lite
RWS-L150 11/2" 1.93" 115 PSI 3.0" .65 lbs. 27" 130'
RWS-L200 2" 2.44" 115 PSI 4.0" .85 lbs. 27" 130'
RWS-L250 21/2" 2.97" 115 PSI 5.0" 1.15 lbs. 27" 130'
RWS-L300 3" 3.46" 115 PSI 6.0" 1.37 lbs. 27" 130'
RWS-L is a lightweight, extremely flexible TUBE White, FDA, 3-A*, Chlorobutyl COVER Gray Thermoplastic w/white stripe
hose. The exterior polymer blend with REINFORCEMENT High strength synthetic cord with steel wire helix TEMP. RANGE -40 to 250° F
RECOMMENDED CLEANING CIP, COP
corrugations that are wide and smooth ensure
low friction and ease of movement. This
suction and discharge hose is designed for
extra flex. Wear resistance is acheived by its
“ARC” abrasion resistant cover. RWS-L delivers
taste and odor free flow and easy clean up. (Meets WORKING MIN. BEND WEIGHT VAC.
3-A* standards, USDA requirements and is FDA MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
compliant)
RWS150 11/2" 2.09" 150 PSI 4.0" 1.00 lbs. 29" 130'
RWS Wine & Spirits RWS200 2" 2.69" 150 PSI 5.0" 1.39 lbs. 29" 130'
RWS250 2 1/2" 3.13" 150 PSI 6.5" 1.68 lbs. 29" 130'
RWS300 3" 3.64" 150 PSI 7.5" 2.11 lbs. 29" 130'
RWS400 4" 4.77" 150 PSI 9.0" 3.15 lbs. 29" 130'
TUBE White, FDA, 3-A*, Chlorobutyl COVER Red Thermoplastic w/white stripe
REINFORCEMENT High strength synthetic cord with steel wire helix TEMP. RANGE -40 to 250° F
Exterior polymer blend with wide/smooth RECOMMENDED CLEANING CIP, COP
corrugations ensures low friction and ease of
movement. This suction & discharge hose is ALL R-Series hose products meet/comply: USDA Class III requirements, FDA CFR Title 21.1772600, 3-A 18-03
designed for extra flex and wear resistance . *The 3-A 62-02, standard applies only to assemblies of 3/4" diameter and larger.
(Meets 3-A* standards, USDA requirements and WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature).
is FDA compliant). Delivers taste and odor free Working pressure and vacuum ratings will decrease as temperatures increase. For “R” series applications that
flow and easy clean up. exceed 200° F contact manufacturer for suggestions.

6
 F-Series Food Grade
These FDA grade hoses are not suitable for 3-A applications
FRH Raised Helix WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
FRH200 2" 2.59" 150 PSI - 1.23 lbs. 29" 100'
FRH300 3" 3.58" 150 PSI - 1.76 lbs. 29" 100'
TUBE White, FDA, 3-A*, Chlorobutyl COVER Gray, w/orange PVC Helix
REINFORCEMENT 2 ply synthetic fabric TEMP. RANGE -25 to 180° F
This hose is an excellent choice for receiving RECOMMENDED CLEANING CIP, COP
bays. Its exterior corrugations provide for tight
bending and easy handling. Designed for
adverse conditions or cleanup as water will not
pool with use of the FRH. Versatile and flexible,
this hose is ideal for suction and discharge use
up to 150 PSI while not imparting taste or oder.

FDF Dry Food Transfer WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
FDF200 2" 2.64" 150 PSI 12.0” 1.89 lbs. 27" 130'
FDF300 3" 3.66" 150 PSI 18.0” 3.15 lbs. 27" 130'
FDF400 4" 4.72" 150 PSI 24.0” 4.52 lbs. 27" 130'
This suction and discharge hose, with it’s TUBE White, FDA, Anti-Static, NBR COVER Green w/conductive black stripe
REINFORCEMENT Spiral ply cords w/2 steel helix wires and static wire TEMP. RANGE -15 to 180° F
anti-static tube and conductive cover is excellent RECOMMENDED CLEANING CIP, COP
for wet or dry abrasive materials, like sugar or
powdered milk. It’s designed to be extremely
flexible and suited for extreme environments.

FPE UHMW-PE S&D

Coming
An economical alternative for fluoropolymer
S o on
lined hose. With a low friction cover it’s a
significant addition to our chemical hose line.
It handles the majority of common industrial Visit acesanitary.com for new additions and most up-to-date product information
chemicals in pressure, gravity and suction
applications. FPE is crush and kink resistant and
durable for challenging applications.
WORKING MIN. BEND WEIGHT VAC.
FGS Full Vacuum MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
FGS150 1½" 2.19" 150 PSI 3.0” 1.20 lbs. " 100'
FGS200 2" 2.69" 150 PSI 4.0” 1.60 lbs. " 100'
FGS250 2½" 3.22" 150 PSI 5.0” 2.00 lbs. " 100'
FGS300 3" 3.72" 150 PSI 6.0” 2.30 lbs. " 100'
Designed to handle a wide variety of liquid FGS400 4" 4.80" 150 PSI 8.0” 3.40 lbs. " 100'
products, including oily edibles. The white
nitritle tube will not impart taste or odor to TUBE White, FDA, Nitrile COVER Gray w/white stripe
the liquids be transferred. This hose is rated REINFORCEMENT 2 Spiral ply synthetic fabric w/double helix wire TEMP. RANGE -30 to 200° F
RECOMMENDED CLEANING CIP, COP
at full vacuum as well as a constant 150 psi
working pressure on all sizes. The distinct,
deep corrugations permit a tighter bend radius.

7
 T- Series Fluoropolymer Lined Hose
All “T-Series” hose meet USP Class VI & FDA Criteria - ALL liners are extra thick to
TSC Silicone Covered Smooth Bore provide better flex life and less permeation. Anti-static tube option available.
WORKING MIN. BEND WEIGHT VAC.
3" MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
2.5”av&
ailable 1/4"
Now TSC025 .46" 1100 PSI .07" .12 lbs. 29" 50'
TSC037 3/8" .61" 1000 PSI 1.0" .14 lbs. 29" 50'
TSC050 1/2" .84" 870 PSI 1.5" .25 lbs. 29" 50'
This silicone covered, PTFE lined tube (tube: TSC075 3/4" 1.12" 650 PSI 2.5" .42 lbs. 29" 50'
smooth bore with exterior convolutions) provides TSC100 1" 1.45" 580 PSI 4.0" .57 lbs. 29" 50'
extreme flexibility. Exceptional for High Purity use TSC150 11/2" 2.03" 430 PSI 6.7" 1.14 lbs. 29" 50'
in Pharmaceutical, Biotech and Foodstuffs industries. TSC200 2" 2.56" 400 PSI 8.2" 1.58 lbs. 29" 50'
This hose will not impart taste or odor to products TSC250 2 1/2" 3.17" 290 PSI 11.8" 2.41 lbs. 29" 50'
being transferred and provides cleaning ease both TSC300 3" 3.65" 220 PSI 13.8" 2.96 lbs. 29" 50'
inside and out. TSC is excellent for use in hot oil or TUBE PTFE unpigmented, 3-A*, USP Class VI & FDA Criteria COVER White, Platinum Cured Silicone
low velocity steam transfer applications. REINFORCEMENT 316L Stainless Steel TEMP. RANGE -20 to 400° F
RECOMMENDED CLEANING CIP, SIP, Autoclave MOLDED SML Molded Labels pg 23

TSC-C Carbon Filled - Static Conductive MODEL I.D. O.D.

WORKING
PRESSURE
MIN. BEND
RADIUS
WEIGHT
PER FT.
VAC.
IN HG. LENGTH
TSC-C025 1/4" .46" 1100 PSI .07" .12 lbs. 29" 50'
3"
2.5w”av& TSC-C037 3/8" .61" 1000 PSI 1.0" .14 lbs. 29" 50'
ailable 1/2"
No TSC-C050 .84" 870 PSI 1.5" .25 lbs. 29" 50'
TSC-C075 3/4" 1.12" 650 PSI 2.5" .42 lbs. 29" 50'
TSC-C100 1" 1.45" 580 PSI 4.0" .57 lbs. 29" 50'
While similar to the TSC, the TSC-C has a TSC-C150 11/2" 2.03" 430 PSI 6.7" 1.14 lbs. 29" 50'
carbon filled tube for safety purposes. This TSC-C200 2" 2.56" 400 PSI 8.2" 1.58 lbs. 29" 50'
hose is recommended for steam applications TSC-C250 2 1/2" 3.17" 290 PSI 11.8" 2.41 lbs. 29" 50'
or volatile media transfer where static build up TSC-C300 3" 3.65" 220 PSI 13.8" 2.96 lbs. 29" 50'
is a concern. TUBE PTFE (Carbon Filled), Static Conductive, 3-A*, USP Class VI & FDA Criteria COVER White, Platinum Cured Silicone
REINFORCEMENT 316L Stainless Steel TEMP. RANGE -20 to 400° F
RECOMMENDED CLEANING CIP, SIP, Autoclave MOLDED SML Molded Labels pg 23
TSB Braided Smooth Bore
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
TSB025 1/4" .41" 3000 PSI 1.7" .16 lbs. 30" 50'
TSB037 3/8" .53" 2500 PSI 2.0" .16 lbs. 30" 50'
TSB050 1/2" .63" 1425 PSI 6.5" .16 lbs. 30" 50'
TSB075 3/4" .86" 1000 PSI 8.2" .20 lbs. 30" 50'
Excellent for fixed applications where minimal
Abuse, handling or flexing exist. Available for TSB100 1" 1.19" 1000 PSI 12.0" .53 lbs. 30" 50'
“flared through” applications. TUBE PTFE unpigmented, USP Class VI & FDA Criteria COVER Stainless Steel braid
REINFORCEMENT 1” double braided TEMP. RANGE -20 to 425° F
HOSE COVER OPTIONS AVAILABLE RECOMMENDED CLEANING CIP, SIP, Autoclave
WORKING MIN. BEND WEIGHT VAC.
TCB Steel Braided Convoluted MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
TCB050 1/2" .75" 1425 PSI 2.0" .19 lbs. 29" 50'
TCB075 3/4" 1.05" 1300 PSI 2.7" .29 lbs. 29" 50'
TCB100 1" 1.35" 1100 PSI 4.0" .51 lbs. 29" 50'
TCB150 11/2" 2.03" 700 PSI 6.0" .81 lbs. 29" 50'
TCB200 2" 2.46" 525 PSI 7.5" 1.00 lbs. 29" 50'
Kink resistant hose that is easy to flex and has TCB300 3" 3.70" 350 PSI 14.0" - 29" 50'
a tighter bend radii than smooth bore. Open- TCB400 4" 5.00" 275 PSI 16.0" - 29" 50'
pitched, seamless, helical convolutions provide TUBE PTFE unpigmented, USP Class VI & FDA Criteria COVER Stainless Steel braid
for easy cleaning and transport of pharmaceuticals, RECOMMENDED CLEANING CIP, SIP, Autoclave TEMP. RANGE -20 to 425° F
chemical, food and beverages.
HOSE COVER OPTIONS AVAILABLE WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
TCP Poly Braided Convoluted TCP050
TCP075
1/2"
3/4"
.86"
1.16"
475 PSI
425 PSI
2.0"
2.7"
.12 lbs.
.18 lbs.
29"
29"
50'
50'
TCP100 1" 1.44" 375 PSI 4.0" .26 lbs. 29" 50'
TCP150 11/2" 2.16" 325 PSI 6.0" .47 lbs. 29" 50'
TCP200 2" 2.56" 275 PSI 7.5" .54 lbs. 29" 50'
TCP300 3" 3.92" 225 PSI 14.0" - 29" 50'
TCP400 4" 5.22" 100 PSI 16.0" - 29" 50'
Better abrasion resistance than metal braids, TUBE PTFE unpigmented, USP Class VI & FDA Criteria COVER Blue polyproplene
easy to flex and has a tighter bend radii than RECOMMENDED CLEANING CIP, SIP, Autoclave TEMP. RANGE -20 to 250° F
smooth bore. Kink resistant with open-pitched,
seamless, helical convolutions that provide for WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature).
easy cleaning and transport of pharmaceuticals, Working pressure and vacuum ratings will decrease as temperatures increase. For “T” series applications that
chemicals, food and beverages. exceed 250° F contact manufacturer for suggestions.
8
 T- Series Fluoropolymer Lined Hose

TRS EPDM Rubber Covered Smooth Bore WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
TRS050 1/2" .97" 300 PSI 1.5" .32 lbs. 30" 60'
TRS075 3/4" 1.27" 300 PSI 3.0" .48 lbs. 30" 60'
TRS100 1" 1.48" 300 PSI 3.5" .57 lbs. 30" 60'
TRS150 11/2" 2.04" 300 PSI 4.5" .89 lbs. 30" 60'
A steel wire is helically wound through the TRS200 2" 2.54" 300 PSI 7.0" 1.22 lbs. 30" 60'
wall which provides crush, kink and vacuum TRS250 2 1/2" 3.07" 300 PSI 10.0" 1.64 lbs. 30" 60'
resistance. Ideal where external abrasion TRS300 3" 3.82" 200 PSI 14.0" 2.68 lbs. 30" 60'
resistance is required. TRS400 4" 4.84" 150 PSI 18.0" 3.98 lbs. 30" 60'
TUBE FEP, 3-A*, USP Class VI & FDA Criteria COVER Green EPDM w/white stripe
REINFORCEMENT Steel wire, helically wound TEMP. RANGE -20 to 300° F
OPTIONAL HEAVY DUTY Available upon request 3-A LISTED 3/4” I.D. and over
RECOMMENDED CLEANING CIP, SIP - Steam shouldn’t exceed 25 psi/250°

TVF VuFlo® Indicator WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
TVF050 1/2" .72" 200 PSI RIGID .18 lbs. 27" 12’
TVF075 3/4" 1.02" 175 PSI RIGID 33 lbs. 27" 12’
TVF100 1" 1.27" 125 PSI RIGID .43 lbs. 27" 12’
TVF150 11/2" 1.82" 105 PSI RIGID .74 lbs. 27" 12’
VuFlo® flow indicator allows quick verification TVF200 2" 2.27" 75 PSI RIGID .80 lbs. 27" 12’
of product volume and transfer through your TVF250 21/2" 2.80" 50 PSI RIGID .88 lbs. 27" 12’
system. Chemically resistant and designed to TVF300 3" 3.31" 45 PSI RIGID .99 lbs. 27" 12’
produce excellent performance in Dairy, Food TUBE CLASS VI, FEP RECOMMENDED CLEANING CIP, COP, SIP TEMP. RZNGE -80 to 450° F
& Beverage, Cosmetics, Pharmaceutical and
Biotech applications. (Meets 3-A*, USDA, FDA 4" Available Upon request - Consult Factory
and USP Class VI standards).

- PFA Lined Hose & Fittings Coming Soon -

Visit
acesanitary.com
for new
additions
and most
up-to-date
product
information

T-Series Products meet/comply: USP Class VI, FDA CFR Title 21 177.2600, 3-A 20-23
*The 3-A 62-02, standard applies only to assemblies of 3/4” diameter and larger.
WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature).
Working pressure and vacuum ratings will decrease as temperatures increase. For “T” series applications that
exceed 250° F contact manufacturer for suggestions.

9
 S-Series Silicone Hose
All “S-Series” products meet or exceed USP Class VI & FDA Criteria
Manufactured from high purity, platinum cured resin and fully
traceable. Extractable & Leachable documentation available upon request.

SXW X-tremely Flexible, Wire Reinforced WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
SXW050 1/2" .94" 150 PSI 2.0" 0.31 lbs. 28" 130'
SXW075 3/4" 1.18" 150 PSI 2.0" 0.40 lbs. 28" 130'
SXW100 1" 1.42" 150 PSI 3.0" 0.49 lbs. 28" 130'
SXW with low force-to-bend characteristics is
an X-tremely flexible suction and delivery SXW150 11/2" 2.00" 125 PSI 4.0" 0.81 lbs. 28" 130'
hose. Our phthalates free tubes are ideal SXW200 2" 2.52" 110 PSI 4.5" 1.05 lbs. 28" 130'
for pharmaceutical, cosmetic and food SXW250 2 1/2" 3.09" 85 PSI 5.5" 1.55 lbs. 28" 130'
products transfer. (Meets 3A*, USDA, FDA and
USP Class VI standards). SXW300 3" 3.58" 70 PSI 7.0" 1.82 lbs. 28" 130'
This High Purity Silicone hose is manufactured SXW400 4" 4.61" 50 PSI 10.0" 2.38 lbs. 28" 130'
to the longest length in the industry (130 feet). TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER White translucent (colors available)
REINFORCEMENT 4 ply polyester fabric w/316L stainless steel wire helix TEMP. RANGE -100 to 395° F
Striking a balance between flexibility and RECOMMENDED CLEANING CIP, SIP, Autoclave
strength, SXW is reinforced with 316L stainless
steel wire.

WORKING MIN. BEND WEIGHT VAC.

SXD Fabric Reinforced Discharge MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
SXD050 1/2" 1.00" 150 PSI 8.0" 0.29 lbs. 26" 130'
SXD075 3/4" 1.22" 150 PSI 10.0" 0.38 lbs. 22" 130'
SXD100 1" 1.46" 125 PSI 12.0" 0.47 lbs. 18" 130'
SXD150 11/2" 1.97" 85 PSI - 0.78 lbs. 12" 130'
SXD like the SXW, is extremely easy to handle.
Reinforced with four fabric layers ensures SXD200 2" 2.48" 70 PSI - 1.02 lbs. 8" 130'
a balance between strength and lightness. SXD250 2 1/2" 3.01" 60 PSI - 1.52 lbs. 6" 130'
Specially designed for bulk transfer, high-pressure, SXD300 3" 3.50" 45 PSI - 1.79 lbs. 4" 130'
and vacuum process applications. (Meets 3A*,
USDA, FDA and USP Class VI standards). Short TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER White translucent (colors available)
REINFORCEMENT 4 ply polyester fabric TEMP. RANGE -100 to 395° F
lengths are ideal for proportioning and load cells. RECOMMENDED CLEANING CIP, SIP, Autoclave

SSD Single Braid Discharge WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
SSD025 1/4" .52" 140 PSI 1.0" 0.09 lbs. - 50'
SSD037 3/8" .66" 135 PSI 1.5" 0.13 lbs. - 50'
SSD050 1/2" .80" 100 PSI 3.0" 0.18 lbs. - 50'
A polyester braid reinforced silicone hose, processed SSD062 5/8" .97" 100 PSI 3.5" 0.22 lbs. - 50'
with pharmaceutical grade elastomer, designed 3/4"
for mid-range pressures. Manufactured using SSD075 1.10" 90 PSI 4.0" 0.26 lbs. - 50'
reinforced polyester braid. Resists weathering and SSD100 1" 1.36" 60 PSI 6.0" 0.31 lbs. - 50'
temperature extremes. (Meets 3A*, USDA, FDA TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER White translucent
and USP Class VI standards). REINFORCEMENT Single ply polyester braid TEMP. RANGE -100 to 395° F
RECOMMENDED CLEANING CIP, SIP, Autoclave

For quickest response,

send ALL request for quotes ALL S-Series Products meet/comply: USP VI, USDA Class III requirements, FDA CFR Title 21 177.2600, 3-A 18-03
and purchase orders to: *The 3-A 62-02, standard applies only to assemblies of 3/4” diameter and larger.
WARNING: Working pressure ratings for all Flex-Rite™ Products are based on 70° F (ambient temperature).
[email protected] Working pressure and vacuum ratings will decrease as temperatures increase. For “S” series applications that exceed 250°F
contact manufacturer for suggestions.

10
 S-Series Silicone Hose
SDB Double Braided Discharge MODEL I.D. O.D.
WORKING
PRESSURE
MIN. BEND
RADIUS
WEIGHT
PER FT.
VAC.
IN HG. LENGTH
SDB050 1/2" .94" 150 PSI 6.0" 0.27 lbs. - 50'
SDB075 3/4" 1.25" 150 PSI 7.5" 0.44 lbs. - 50'
SDB100 1" 1.47" 125 PSI 8.0" 0.47 lbs. - 50'
This high-presssure, silicone, double braided, TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER Solid white
non-metalic hose can be autoclaved, irradiated REINFORCEMENT 4 ply polyester fabric TEMP. RANGE -100 to 395° F
RECOMMENDED CLEANING CIP, SIP, Autoclave
or sterilized by ethylene oxide gas. (Meets 3A*, USDA,
FDA and USP Class VI standards). Designed to
resist weathering and temperature extremes.

SHF/SMW Wire Reinforced WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
SHF/SMW050 1/2" .94" 200 PSI 2.0" 0.30 lbs. 29" 24'
SHF/SMW075 3/4" 1.18" 200 PSI 2.5" 0.40 lbs. 29" 24'
SHF/SMW100 1" 1.46" 175 PSI 3.5" 0.53 lbs. 29" 24'
A highly flexible hose that is especially easy to SHF/SMW150 11/2" 1.93" 175 PSI 5.5" 0.67 lbs. 29" 24'
handle. A silicone hose reinforced with stainless
SHF/SMW200 2" 2.44" 150 PSI 6.5" 0.88 lbs. 29" 24'
steel wire. Designed for bulk transfer, high pressure,
and vacuum process applications. (Meets 3A*,
USDA, FDA and USP Class VI standards). Call factory for sizes above 2 inches.
Manufactured in a clean room environment and TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER White translucent
contains medical-grade platinum-cured silicone REINFORCEMENT 4 ply polyester fabric stainless steel wire TEMP. RANGE -100 to 395° F
throughout. Ideal for proportioning and load cells. RECOMMENDED CLEANING CIP, SIP, Autoclave

SMD Multi-ply Discharge WORKING MIN. BEND WEIGHT VAC.

MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
SMD050 1/2" .88" 200 PSI 3.0" 0.21 lbs. 27" 24'
SMD075 3/4" 1.13" 200 PSI 4.0" 0.28 lbs. 24" 24'
SMD100 1" 1.38" 175 PSI 7.0" 0.38 lbs. 20" 24'
A 4-ply, fabric reinforced hose designed for SMD150 11/2" 1.88" 175 PSI 12.0" 0.47 lbs. 17" 24'
higher pressure applications. the inner
diameter is a continuous extruded bore to SMD200 2" 2.38" 150 PSI 30.0" 0.60 lbs. 14" 24'
ensure maximum smoothness and purity. TUBE FDA, 3-A*, USP Class VI silicone - Platinum cured COVER White translucent
(Meets 3A*,USDA, FDA and USP Class VI standards). REINFORCEMENT 4 ply polyester fabric TEMP. RANGE -100 to 395° F
RECOMMENDED CLEANING CIP, SIP, Autoclave

SCT Non-reinforced Tubing (see page 12)

Traceability Solution… SML Molded Labels

for Silicone or Silicone covered hoses.
• Permanently Attached, No Product Contact
• Completely Sealed, Easy to Read Text
• Autoclavable, CIP & SIP Compatable
• Label Contains Custom Information as Needed
• Quick Turn-around with Customized Text Available

ALL S-Series Products meet/comply: USP VI, USDA Class III requirements, FDA CFR Title 21 177.2600, 3-A 18-03
*The 3-A 62-02, standard applies only to assemblies of 3/4” diameter and larger.
WARNING: Working pressure ratings for all Flex-Rite™ Products are based on 70° F (ambient temperature).
Working pressure and vacuum ratings will decrease as temperatures increase. For “S” series applications that exceed 250°F
contact manufacturer for suggestions.

11
 A-Series Specialty Tubing
Most popular sizes shown, complete list available online
APT is ideal for pharmaceutical, biological, MODEL I.D. O.D. WALL LENGTH
food and beverage applications and provides APT187X375 3/16” 3/8” 3/32” 50'
superior performance in peristaltic pumps.
Extruded from virgin, medical grade TPR to APT250X500 1/4” 1/2” 1/8” 50'
precise dimensional tolerances and provides APT375X625 3/8” 5/8” 1/8” 50'
an excellent alternative to silicone tubing. APT500X750 1/2” 3/4” 1/8” 50'
APT is lot & batch traceable and can handle APT750X1125 3/4” 1-1/8” 3/16” 50'
multiple autoclave cycles.
Pump Tubing TUBE: 3-A* Class VI, FDA TPR RECOMMENDED CLEANING: Ethylene Oxide, Autoclave, Gamma TEMP. RANGE: -40 to +275° F

AST is also WELDABLE, designed and MODEL I.D. O.D. WALL LENGTH
formulated to meet the critical demands of AST187X375 3/16” 3/8” 3/32” 50/100'
the medical, pharmaceutical, research, AST250X500 1/4” 1/2” 1/8” 50/100'
biotech and diagnostics industries. Our
unique production method keeps the tubing AST375X625 3/8” 5/8” 1/16” 50/100'
round after autoclaving to insure better flow AST500X750 1/2” 3/4” 1/8” 50/100'
control in pumps and ease of welding. AST750X1000 3/4” 1” 1/8” 50/100'
Sealable Tubing TUBE: 3-A* Class VI, FDA TPE RECOMMENDED CLEANING: Ethylene Oxide, Gamma, Autoclave 275° F max. TEMP. RANGE: -100 to +250° F

SCT is a low-volatile grade, platinum-cured MODEL I.D. O.D. WALL LENGTH

silicone tubing. Produced in an ISO Class 7 SCT187X375 3/16” 3/8” 3/32” 25/50/100'
Clean Room specifically for use in critical
SCT250X500 1/4” 1/2” 1/8” 25/50/100'
biotech, pharmaceutical, cosmetic, biomedical
and food applications. Works well as peristaltic SCT375X625 3/8” 5/8” 1/8” 25/50/100'
pump tubing. SCT500X750 1/2” 3/4” 3/4” 25/50/100'
SCT750X1000 3/4” 1” 1/8” 25/50/100'
Non-reinforced Tubing TUBE: Translucent Silicone, RoHS, 3-A* CLASS VI - Platinum Cured RECOMMENDED CLEANING: ETO, SIP, Autoclave, Gamma TEMP. RANGE: -90 to +430° F

APF is a Phthalate (DEHP) FREE vinyl MODEL I.D. O.D. WALL LENGTH
tubing. Designed to be softer for use with APF250X500 1/4” 1/2” 1/8” 100'
laboratory equipment and vacuum lines. It
APF375X500 3/8” 1/2” 1/16” 50/100'
also addresses the concerns of REACH
compliance and meets USP Class VI testing. APF500X750 1/2” 3/4” 1/8” 50/100'
APF625X1375 5/8” 1-3/8” 3/8” 50/100'
APF750X1000 3/4” 1” 1/8” 50/100'
Phthalate Free TUBE: 3-A* Class VI, FDA PVC RECOMMENDED CLEANING: Ethylene Oxide TEMP. RANGE: 25 to +150° F

ACT combines the outstanding characteristics MODEL I.D. O.D. WALL LENGTH
of a chemically inert, USP Class VI certified
clear liner of low density polyethylene ACT250X375 1/4” 3/8” 1/16” 50'
(LDPE) with a high purity ethylene vinyl ACT375X500 3/8” 1/2” 1/16” 50'
acetate (EVA) cover to produce flexible ACT500X625 1/2” 5/8” 1/16” 50'
transparent tubing with very good burst ACT500X750 1/2” 3/4” 1/8” 50'
strength. ACT750X1000 3/4” 1” 1/8” 50'
Co-extruded Tubing TUBE: Translucent LDPE, RoHS, REACH, 3-A* CLASS VI COVER: Translucent EVA RECOMMENDED CLEANING: ETO TEMP. RANGE: -60 to +150° F

ADL tubing material is plasticizer-free, meaning MODEL I.D. O.D. WALL LENGTH
it contains no DEHP or other phthalates which ADL500X750BL 1/2” 3/4” 1/8” 100'
are known to cause environmental and health
ADL625X1000BL 5/8” 1” 3/16” 100'
issues. Also, no animal derived lubricants in
the manufacturing process, as these can potentially ADL625X1000GR 5/8” 1” 3/16” 100'
cause contamination of finished milk. Unlike ADL750X1250GR 3/4” 1-1/8” 3/16” 100'
traditional dairy tubing, ADL has superior tear
Dairy Line resistance and does not shed carbon.
TUBE: White, 3-A* Class VI, FDA TPE COVER: Blue or Green TPE RECOMMENDED CLEANING: CIP, COP TEMP. RANGE: -40 to +180° F
*The 3-A 62-02, standard applies only to assemblies
of 3/4” diameter and larger.

12
 P-Series PVC Hose
PCT Clear Non-reinforced Tubing P-Series hoses are Phthalate (DEHP) FREE
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PCT050* 1 /2" .75" 45 PSI - .13 lbs. - 100'
PCT075 3/4" 1.12" 40 PSI - .30 lbs. - 100'
FDA PVC transparent tubing is a clear extrusion that is PCT100 1" 1.37" 35 PSI - .38 lbs. - 100'
compliant with 3A, USDA, USP Class VI & FDA standards. PCT150 11/2" 1.87" 35 PSI - .54 lbs. - 50'
PCT200 2" 2.50" 35 PSI - .96 lbs. - 50'
PBT Braid Reinforced Tubing TUBE FDA, 3-A*, USP Class VI, PVC
REINFORCEMENT Clear extrusion no reinforcement
COVER Transparent
TEMP. RANGE 25 to 150° F
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PBT050* 1/2" .81" 200 PSI - .13 lbs. - 100'
PBT075 3/4" 1.12" 150 PSI - .22 lbs. - 100'
A flexible clear tubing with multiple polyester braids provides PBT100 1" 1.37" 125 PSI - .30 lbs. - 100'
dependable reinforcement for all suitable applications and PBT150 11/2" 1.94" 100 PSI - .64 lbs. - 100'
is compliant with 3A, USDA, USP Class VI & FDA standards. PBT200 2" 2.49" 75 PSI - .94 lbs. - 100'
TUBE FDA, 3-A*, USP Class VI, PVC COVER Transparent
PWT Wire Reinforced Tubing REINFORCEMENT Clear extrusion with polyester textile inner braid TEMP. RANGE 25 to 150° F
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PWT050* 1/2" .81" 150 PSI 2.0" .21 lbs. 29" 100'
PWT075 3/4" 1.12" 150 PSI 3.0" .36 lbs. 29" 100'
PWT100 1" 1.37" 100 PSI 4.0" .44 lbs. 29" 100'
A heavy-duty hose with steel wire helix rod reinforcement, PWT150 11/2" 1.86" 50 PSI 6.0" .58 lbs. 29" 50'
suitable for milk handling and food processing. It is PWT200 2" 2.39" 50 PSI 8.0" .84 lbs. 29" 50'
compliant with 3A, USDA, USP Class VI & FDA standards PWT250 2 1/2" 3.00" 50 PSI 10.0" 1.38 lbs. 29" 50'
and provides high suction even in higher temperatures. PWT300 3" 3.50" 50 PSI 12.0" 1.64 lbs. 29" 50'
TUBE FDA, 3-A*, USP Class VI, PVC COVER Transparent
PBW Suction/Transfer Hose REINFORCEMENT Clear extrusion with steel wire helix TEMP. RANGE 25 to 150° F
WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PBW050* 1/2" .90" 250 PSI 2.0" .26lbs. 29" 100'
PBW075 3/4" 1.19" 225 PSI 2.5" .40 lbs. 29" 100'
PBW100 1" 1.45" 225 PSI 3.5" .53 lbs. 29" 100'
This hose combines polyester braids with steel wire of the PBW150 11/2" 2.03" 175 PSI 5.5" .80 lbs. 29" 50'
PBT & PWT hoses to provide the benefits of both. It is PBW200 2" 2.60" 150 PSI 7.0" 1.28 lbs. 29" 50'
compliant with 3A, USDA, USP Class VI & FDA standards. TUBE FDA, 3-A*, USP Class VI, PVC COVER Transparent
REINFORCEMENT Clear extrusion with steel wire helix polyester textile inner braid TEMP. RANGE 25 to 150° F
PHH Suction/Transport Hose LOW
ure WORKING MIN. BEND WEIGHT VAC.
Temperatund
Compo MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PHH150 11/2" 1.79" 75 PSI 4.0" .45 lbs. 28" 100'
PHH200 2" 2.33" 75 PSI 5.0" .65 lbs. 28" 100'
PHH250** 2 1/2" 2.87" 55 PSI 8.0" .84 lbs. 28" 100'
PHH300** 3" 3.42" 55 PSI 11.0" 1.18 lbs. 28" 100'
A clear hose, reinforced with white helix rod is compliant TUBE FDA, 3-A*, UHMW-PVC COVER Transparent
with 3A, USDA and FDA standards. It provides extreme REINFORCEMENT Clear extrusion with steel wire helix TEMP. RANGE -40 to 150° F
low temperature flexibility, ideal for use in milk hausing. WORKING MIN. BEND WEIGHT VAC.
MODEL I.D. O.D. PRESSURE RADIUS PER FT. IN HG. LENGTH
PHC Suction/Transfer Hose PHC100 1" 1.28" 100 PSI 3.0" .24 lbs. 29" 100'
PHC150 11/2" 1.80" 85 PSI 6.0" .50 lbs. 29" 100'
PHC200 2" 2.36" 85 PSI 8.0" .71 lbs. 29" 100'
PHC250** 2 1/2" 2.88" 65 PSI 10.0" .94 lbs. 29" 100'
PHC300** 3" 3.42" 55 PSI 11.0" 1.14 lbs. 29" 100'
TUBE FDA, 3-A*, UHMW-PVC COVER Transparent
A clear hose, reinforced with clear helix rod is compliant REINFORCEMENT Clear extrusion with clear helix TEMP. RANGE -4 to 150° F
with 3A, USDA and FDA standards. Suited for in-plant ALL P-Series hose products meet/comply: USDA, NSF requirements, FDA CFR Title 21 177.2600, 3-A 20-00
environments, its low temperature flexibility is perfect
*The 3-A 62-02, standard applies only to assemblies of 3/4” diameter and larger.
for all liquid dairy or dry product transfers.
**Bulk Only ( Fittings not available)
WARNING: Working pressure ratings for all Flex-Rite™ Products are based on 70° F (ambient temperature). Working pressure
Note: PHH & PHC available with reusable fittings only and vacuum ratings will decrease as temperatures increase. For “P” series applications that exceed 100°F contact manufacturer for suggestions.
13
 I - Series Industrial Hose
IWD ISH
Washdown Steam

Designed for cleanup duties in dairies, creameries A rugged, abrasive and blister resistand hose for
breweries, food, beverage, meat and poultr y cleaning pumps. valves, tubing and equipment
processing plants. This is an economical, high quality suitable for steam. Stands up to the harshest of
hose capable of handling hot water up to 200° F. The environments with a specially formulated tube and
spiral construction provides for excellent handling cover that will not harden or crack during normal
and flexibility. Abrasion resistant, non-marking cover service. The steel braid reinforcement provides for
maintains its sanitary appearance. safe use with steam pressures up to 250 PSI at 430° F.
WORKING WEIGHT WORKING WEIGHT
MODEL I.D. O.D. PRESSURE PER FT. MODEL I.D. O.D. PRESSURE PER FT.
izes
Other Solors
IWD075 3/4" 1.17" 300 PSI .40 lbs and C ble ISH075 3/4" 1.25" 250 PSI .48 lbs
Availa
TUBE Black EPDM COVER White EPDM TUBE Black Chlorobutyl COVER Red EPDM
REINFORCEMENT Two synthetic textile spiral cords TEMP. RANGE -20 to 200° F REINFORCEMENT Steel braid TEMP. RANGE -40 to 430° F

- See RWD on page 6 for an FDA option to IWD - - Requires a Special Fitting consult factory -

Steam Hose Safety Facts For quickest response, send ALL request for quotes
Working with steam can be very hazardous. Safety and purchase orders to: [email protected]
precautions should be observed when handling to
minimize or eliminate personal injury or property damage.

Selection and use of steam hoses Represented is water when

• Make sure steam hose is identified as a steam hose. subjected to heat and pressure.
It should be identified, stating working pressure Use only hoses specifically
and temperature rating. designed for each application.
• Make sure working pressure and temperature is
not exceeded.
• Do not allow hose to remain under pressure when SATURATED STEAM
not in use. Guage Temp. of
• Avoid excess bending or flexing of hose near the Steam Hose Chart Pressure Saturated
coupling. Straight line operation is preferred. If 450°
(PSI) Steam (F°)
bends are necessary as part of operation, spring 10 239
guards may help. 25 257
400°
Maintenance Procedures 50 298
75 320
T E M P E R AT U R E

• Periodic inspection of hose should include looking

350° 100 338
for cover blisters and lumps
• Check for kinked areas that could damage hose. 125 353
300° 150 366
• Drain hose after each use to avoid tube damage
before hose is put back in operation, to avoid 175 377
“pop corning” of the tube. 250° 200 385
• Do not store hose over hooks. 225 400
• Steam hose lying on metal racks or installed 200°
250 413
around steel piping will dry out the hose, causing 0 50 100 150 200 250
GUAGE PRESSURE, PSI
and cover cracking.

14
 Specialty Molded & Jacketed Hose

RMH Rubber Molded Hose Application: Customizable, flexible flow panel jumper
that flex’s due to expansion / contraction and ground
movement. This flexibility allows for easy connection
every time, which minimizes operator time connecting
to the panel.
Tube: White FDA, 3-A Chlorobutyl
(Other compounds available: Silicone, EPDM, Nitrile, Viton)
Reinforcement: Spiral plied synthetic fabric w/wire helix
Cover: EPDM
(Other compounds available: Silicone, Chlorobutyl, Nitrile, Viton)
Temp. Range: -40 to 225˚ F
Working Pressure: 200 PSI
Recommended Cleaning: CIP, COP
Sizes: 3/4” thru 6” I.D.
End Connections: Refer to Ace Sanitary
catalog or website: acesanitary.com
Note: Options: Cover colors, compounds, reinforcement,
Each jumper is custom manufactured to specific customer requirements. The above specifications refer to our sample valves, proximity switches. Other options
standard jumper. These specifications will change by selecting different compounds and reinforcement types. available upon request, consult factory.

_WJ CIP
Water Insulated
Jacketed Hose
Hose
(Water Jacket can be added to any Flex-Rite hose) (Custom Insulation Package can be added to any Flex-Rite hose)

EHH Electrically Heated Hose Assemblies

EHH is custom manufactured for a variety of Applications:

applications to keep product flowing. Compared • Gel Cap Production Packaging Industry
to single conductor heating elements, the EHH • Photographic Development Solutions
provides optimal heat transfer to a large (95%) • Hot Oil Transfer
surface area. Individual strand conductors are fixed • Cosmetic Transfer
in place and insulated with flexible, high-temperature • Candy Manufacturing
fiber. The “Overwrap” layer of silicone rubber secures • Chemical Transfer Testing
the conductors and provides a flexible cushion. • Pharmaceutical Slurries
• Hot Fill
Ace’s proprietary Seal-Rite fittings are available in a wide range of end styles. • Food Transfer (FDA approved)

To order RMH or EHH contac t the fac tor y to discuss your specific application.
15
 Assembly Types Molded Hose
Molded Ends
Single pin polysulfone clamps are lightweight
and molded to provide even closing pressure.
These clamps are highly recommended over
standard steel version for molded hose ends.
SPP075 – all mini clamps
SPP150 – 1 & 1.5” clamps
SPP200 – 2” clamps
SPP250 – 2.5” clamps
SPP300 – 3” clamps

Molded Ends
Designed to provide the ultimate in sanitary flow the “Crack and
crevice free” ends come in a variety of configurations on Ace Sanitary
“P” series hose using ultra high purity Hytrel. Applications include
instances where the process demands no stainless steel wetted parts,
lighter weight and OEM applications.
For our “A” series tubing molded ends are available in Polypropylene,
Hytrel and Polysulfone depending on the materials involved. Popular
end styles would be Tri-Clamps, I-Lines, threaded ends and bevel seats.
Backup Cup For silicone products we would offer silicone tri-clamp molded ends
with either stainless steel or polysulfone back up rings or cups.
Generally, molded ends also provide cost savings.
Note: For all molded ends in sanitary styles Molded plastic clamps are
recommended as they provide 360 degrees of pressure vs. SS cast clamps that
only provide a few pressure points in the circumference of the tri-clamp or
I-line flanges.

Molded Assembly Part Number (Example)

M / APT 050 TC050 TC050 OAL

Molded End Hose/Tube I.D. Size Style/Size 1st End Style / Size 2nd End Length"
ACT 025 TC TC

ASSEMBLY LENGTH - OAL

APF 037 MT* MT*
APT 050 FT* FT*
AST 075 IM* IM*
PBT 100 IF* IF*
PCT 150 BS* BS* HOSE
PWT CM* CM*
PHC CONSULT FACTORY FOR ADDITIONAL CHOICES
PHH For quickest response, send ALL request for quotes and
purchase orders to: [email protected]
SCT
SSD } P - Poly Backup Cup
S - SS Backup Cup
Overall length tolerances for assemblies are:
• 1/4" on assemblies to 24"
• 1/2" on assemblies to 25" to 60"
} SSDP
Hose/Tube (example)
SCTP OR SCTS
OR SSDS
• 1% on assemblies over 60"
* limited sizes & materials. Consult factory
END STYLE

16
 Assembly Types

DELRIN
ReUsable Assembly Part Number (Example) NUT

RE / S / SSD 100 TC100 TC100 144 - XX

ReUsable Nut Mat’l Hose/Tube I.D. Size Style/Size 1st End Style / Size 2nd End Length" Special Services

ASSEMBLY LENGTH - OAL

S APT 025 = 1/4" TC = Sanitary Clamp (stepup available)
304 SS APF 037 = 3/8" TE = Butt Weld - Tube
ADL 050 = 1/2"
B SCT 062 = 5/8" Other Styles Available (consult factory)
Blue
Polymer SSD 075 = 3/4"
SDB 100 = 1" HOSE
*
Colors
SXD 150 = 1-1/2"
SXW 200 = 2"
Available
SMW CONSULT FACTORY FOR ADDITIONAL CHOICES
(MIN. REQ’D)
SMD For quickest response, send ALL request for quotes and
PHH purchase orders to: [email protected]
PHC
SCT Overall length tolerances for assemblies are:
PBT • 1/4" on assemblies to 24" S.S. NUT
PWT • 1/2" on assemblies to 25" to 60"
PCT • 1% on assemblies over 60" END STYLE
17
 Measurement / End Styles
Hose Length Measurements Length Tolerance
Ace Sanitary hose assemblies are generally Up to 24" OAL assemblies: 1/4" (.250")
measured from end to end. The exceptions to this Over 24" up to 60": 1/2" (.500")
practice are illustrated at left. JIC Female Swivel, Over 60": 1%
Female Cam & Swivel, and Sanitary Bevel Seat
Length to
sealing surface fittings are measured lengthwise from the sealing
of fitting surface of the fitting.

The following illustrations show how to measure the overall length (OAL) of Ace Sanitary hose
assemblies, including 45° and 90° elbow fittings. Examples are shown with clamp style sanitary fittings.

Face of straight sanitary Face of straight sanitary

<
Length <
< to centerline of <
< to centerline of <
Face to Face 45° elbow sanitary 90° elbow sanitary

Length to
sealing surface <

of fitting Straight sanitary x straight sanitary Straight sanitary x 45° elbow sanitary Straight sanitary x 90° elbow

90° elbow centerline to 45° elbow centerline to 45° elbow centerline to

< 90° elbow centerline <
< 45° elbow centerline <
< 90° elbow centerline <

(see Notation Notes) (see Notation Notes) (see Notation Notes)

90° sanitary elbow x 90° sanitary elbow 45° sanitary elbow x 45° sanitary elbow 45° sanitary elbow x 90° sanitary elbow
Length to
sealing surface <

of fitting
Rotation Notes:
When ordering double elbow hose assemblies, angular orientation
180°
between the elbosw is expressed in degrees. The angle is measured Rotation

counterclockwise from the centerline of the nearest fitting when the

fitting is positioned at 6 o’clock to the centerline of the other fitting,
as shown at right. (Front view) (Side view)
Angle orientation 180° configuration
measured in degrees
(counterclockwise)

Popular End Connector Styles Complete listing on page 19.

Locking
Handles
Standard

18
Assembly Part Number (Example)

RSD 050 TC 050 TC 050 288

Hose I.D. Size Style / Size 1st End Style / Size 2nd End Assembly
Length (INCHES)

Hose I.D. Size End Style

RDC 025 = 1/4" TC = SanitaryClamp (stepup available)
RBT 037 = 3/8" TE = Butt Weld - Tube

ASSEMBLY LENGTH - OAL

RES 050 = 1/2" BS = Bevel Seat - Plain w/nut
RWD 062 = 5/8" BM = Bevel Seat - Threaded
RSD 075 = 3/4" IF = I - Line - Female
RCT 100 = 1" IM = I - Line - Male HOSE
RCR 150 = 1-1/2" JM = John Perry - Threaded
RWS 200 = 2" JF = John Perry - Plain w/nut
SMW 250 = 2-1/2" QM = Q - Line
SMD 300 = 3" CF = Cam - Female
SSD 400 = 4" CM = Cam - Male
SDB 600 = 6" MT = Male - NPT Pipe Thread
SHF FT = Female - NPT Pipe Thread
TRS AF = Flange End
TSB See FF = BSM - Flat Face Plain w/nut
TCB Product FM = BSM - Flat Face Threaded
TCP RF = RJT - Plain w/nut
Pages
TSC RM = RJT - Threaded
PCT
for SF = SMS - Plain w/nut
PBT Sizes SM = SMS - Threaded
PWT DF = DIN - Plain w/nut END STYLE
PBW DN = DIN - Threaded
TA = Compression Tube End

CONSULT FACTORY FOR ADDITIONAL CHOICES Overall length tolerances for assemblies are:
For quickest response, send ALL request for quotes and purchase orders to: • 1/4" on assemblies to 24"
[email protected] • 1/2" on assemblies to 25" to 60"
• 1% on assemblies over 60"

19
 General Hose
Installation Information

Chemical Charts are located on our website

Prior to Installation
inspect hose completely for signs of obvious damage. Possible damage
may include cuts to cover, kinking, broken braids and crushing. This damage 1.
can reduce hose life and pressure rating.
Do Not Use any damaged hose.
Hose should be application specific. Review materials, pressures, chemical
compatibility, temperature and envirnment to ensure proper selection of hose.

• Failure of hose will occur when hose is bent (Fig. 1) beyond minimum
bend radius. Bend radii are given for individual products and sizes. The
bend radius values must be observed (measure to inside radius of 2.
fluoropolymer-lined hose and the centerline for stainless steel metal hose)
for hoses to be installed properly. Occasionally, vacuum and pressure ratings
are based on not to exceed 2% minimum bend radius. The manufacturer
should be contacted for specific hose rating and data.

• Restrict hose movement to a single plane (Fig. 2) to minimize resultant

twisting or torque. Within the bending plane is where flexing should occur.
Stress fatigue increases with excessive bending of hose.
3.
• Axial or twisting movement (Fig. 3) should be eliminated. The likelihood
of leakage or failure increases for hoses that are twisted (torqued) during
assembly. Floating flanges or swivel-type fittings (i.e., JIC) can eliminate
improper twisting.

• Avoid stretching or compressing the hose (Fig. 4) along its longitudinal 4.

axis with in-line installation.
OAL
Motion Calculations
Axial Motion: Motion that occurs when a hose is compressed along its
longitudinal axis. Axial motion is only applicable in very short lengths of
annular hose only. Fluoropolymer lined hose should not be subjected to
axial motion. Y

Offset Motion: Motion that occurs when one end of the hose is deflected
in a plane perpendicular to it’s longitudinal axis with the ends remaining LL
parallel. In offset applications where motion is repeated, the offset should
never exceed 25% of the minimum bend radius. To calculate the required
live length to achieve a desired offset, use the following calculations: Note: Where offset motion “Y” occurs
on both sides of hose centerline, the
LL = 6YR + Y2 hose live length should be based on
LL = Hose live length, inches total travel, or 2Y. The modified
R = Min. Bend Radius, inches calculation will be:
Y = Offset, inches
OAL = LL + Fitting Length + (2x nominal hose diameter) LL = 12YR + (2Y)2

20
 Def initions Industry Recognized Terms

Bend Radius (fluoropolymer hose and all rubber hose)

• The radius of a bent section of hose measured to the innermost surface
of the curved portion (R1)
Bend Radius (metal hose)
• The radius of a bent section of hose measured to the hose centerline (R2)
Minimum Bend Radius
• The smallest radius at which a hose can be used
Force to Bend
• The amount of stress required to induce bending around a specific
radius - a measure of stiffness
Maximum Rated Working Pressure
• The maximum pressure hoses should be subjeted to on a continous basis
Maximum Rated Test Pressure
• The maximum rated pressure is multiplied by 150% Bend Radius All Bend Radius for
Nominal Rated Burst Pressure (except Metal Hose) Metal Hose, Measure
• The average pressure at which the core of braid will rupture at ambient Measure to inside radius to centerling radius
temperature
Pressure / Temperature Correction
• Hose pressure capabilities decrease as the temperature increases. Consult
factory to determine pressure rating at elevated temperatures

Flexibility / Bend Radius Formula to determine minimum

Reprinted from RMA Hose Handbook IP-2 Four th Edition hose length given bend radius and
Flexibility and minimum bend radius are important factors in hose design and degree of bend required:
selection if it is known that the hose will be subjected to sharp curvatures in normal
use. When bend at too sharp an angle, hose may kink or flatten in the cross-section.
A
The reinforcement may also be unduly stressed or distorted and the hose life
thereby shortened. L= 360° x 2 π B
Adequate flexibility means the hose should be able to conform to the smallest
anticipated bend radius without over stress. The minimum bend radius is generally L = Minimum length of hose to make bend
specified for each hose in this catalog. This is the radius to which the hose can be (bend must be made equally along this portion of
bent in service without damage or appreciably shortening its life. The radius is hose length)
measured to the inside of the curvature.
A = Angle of bend
B = Given bend radius of hose
Hydraulic Shock… π= 3.14
Due To Instantaneous Pressure Increase
1400
Example: To make a 60° bend at the
hose’s rated minimum bend
radius of 15 cm

PRESSURE INCREASE (PSI)

1200

60 x 2 x 3.14 x15 ~ 16cm

1000
L= =
360°
800
Thus, the bend must be made over
600 approximately 16 cm of hose length.
The bend radius used must be equal
Maximum Possible Liquid to or greater than the rated minimum
400 Pressure Increase Developed in bend radius. Bending the hose to a
1", 1-1/2", 2" and 2-1/2" OD Tubing
smaller bend radius than minimum
Lines Assuming Instantaneous
200
Flow Stoppage.
may kink the hose and result in
damage and early failure.

0 40 80 120 160 200 240 280 320 360 400

F LO W R AT E ( G P M )

21
 Accessories
Hose Supports & Bumpers
Seal-Rite™ Hose Support
For use with: The Seal-Rite hose support provides
RSD, RDC, RES, RCR, RCT, RWS, RWS-L additional protection for your transfer
In sizes: hoses. In environments where abnormal
1½" - 2" - 3" - 4" cover wear can occur, you can lift up and
1" extend the life of your hose. The two halfs
easily attach with two recessed locking
screws. The lightweight design, wide
9¼" outer edges and even wider collar provides
stability which eliminates kinking. Our
supports are ideal for use in receiving bays
3" to eliminate damming or pooling water.

Seal-Rite™ Fitting Bumper

For available sizes: The Seal-Rite fitting bumper provides
Please contact the factory additional protection for your floors
and fittings. The bumper elevates the
BUMPER should be installed
during assembly
fitting while absorbing the occasional
mishap.
This product is a “Special Order” and a
“Minimum Order” item. Consult factory
Protect
about ordering.
Your
Investment

Hose Sling Hose Support

Hose Sling is a polyurethane saddle
designed to suspend hoses. Each model
comes complete with its own UV treated
sling which is fastened in a choker position.
Designed to accommodate the OEM’s
minimum bending radius to protect hose
from kinking and prolong the life of the hose.
Protect
Your
Investment

Vue-Gard Protective Shield

These “See-Thru” shields Vue-Gard Shields provide for visual inspection
withstands temperatures up to of joints, indicators, and flanges. The shield
300°F and pressure to 1000 PSI prevents hazardous sprayouts and contributes
to a safe work environment. Constructed of
a secially designed TFE and clear ECTFE to
Special fabrication for flow enable clear viewing.
indicators, pressure vessels,
An impregnable barrier that is ideally suited
heat exchangers and various
for use in chemical, pharmaceutical, pulp
instruments used in process
and paper, and refinery operations.
industries.

22
 Accessories
Molded Labels, Racks & Custom Fabrication
Traceability Solution… SML Molded Labels
for Silicone or Silicone covered hoses.
• Permanently Attached, No Product Contact
• Completely Sealed, Easy to Read Text
• Autoclavable, CIP & SIP Compatable
• Label Contains Custom Information as Needed
• Quick Turn-around with Customized Text Available

Stainless Hose Racks

HRA Proper hose storage is critical
“Arched” Hose Rack to maintain the working life of
hose assemblies. Stainless
Space™ Hose Racks are the
perfect solution to organizing
your sanitary hose assemblies.
When used properly, these
Racks ensure that each hose is stored in accordance
with the manufacturer’s recommendations.

Features & Benefits

• Compact designs for use in any clean environment.
• Extends hose working life and ensures 100% drainage.
• Eliminates clutter and enhances safety.
• Stores hoses, clamps gaskets and adapters in one convenient location.
• Conforms with FDA and 3A regulations for hose storage.

HRS
“Slotted” Hose Rack

For quickest response, send ALL requests for quotes and purchase orders to: [email protected]

Stainless Steel Fabrications and Customs Designs Include:

Container & Utensils Work Tables Custom Furniture
• Trays • Heavy Duty • Cabinets
• Funnels • Meets Sanitary Specs • Cupboards
• Pans • Variety of Configurations • Carts
• Samplers • Bench Tops
Stools
Ladders • Functional & Dependable
• Non-folding HRM
“Mobile” Hose Rack
23
 Equipment
Testing, Production, Marking

Test Benches
This test bench assures that your
assembly has been joined correctly.
The programmable PLC Controller
gives the operator the ability to
pre-program and repeat a test
sequence. (optional save to USB)

Cutoff Saws
These rugged, dependable saws
offer features not found on
other saws. choose the one
with the capabilities and
features which meet
your individual
requirements.

Molded Label Machines

Equipment to make permanent labels on silicone or silicone covered
hose. Label can contain part number, date, serial number or custom
information as needed.

Part Marking
The MLM fiber laser
system packs a powerful
punch and gives users
maximum application
flexibility. Front mounted
controls make operation
simple.
A USB connection to a
laptop or desktop PC
is all that is required
to start programming.
Quickly mark text,
barcodes, serial and
date codes graphics
and more.
24
 Equipment
Washdown, Crimpers
Washdown Station
The Ace Sanitary Washdown
Station delivers a high
temperature wash down
using a proprietary mixing
valve that combines steam
and water for a constant
stream at the operator’s
set temperature.
The intuitive safety
shutoff feature essentially
eliminates the “hose full
of steam” problem of the
past, decreasing
hazardous conditions. The HCX
With a single moving part, (Hot/Cold Water
Mixing) Station
the thermal actuator within
combines simplicity
the mixing valve cartridge, the and cost effectiveness
Ace Sanitary Washdown Station with the reliability and
ensures long, uninterrupted use safety inherent in all
and silent operation, even in high washdown stations by
mineral content water conditions. Ace Sanitary

For quickest response, send ALL requests for quotes and purchase orders to: [email protected]

Flex-Crimp™ brand of crimpers is a powerful machine capable of

crimping a variety of sanitary, hydraulic, composite and industrial
hoses. All Flex-Crimp models come standard with a quick change
tool for quick and easy die changes. The touch screen crimp controller
takes the guess work out of crimping with easy machine calculations.
The Flex-Crimp system
continuously crimps to within
.005" everytime. the Flex-Crimp
line of products offers the most
consistent crimp in the market
today and comes with a one
year manufacturer’s warranty.

The CC60 crimper with a 7.5 HP The CC38 crimper with 240 ton crimping
pump for 265 tons of crimping force and force has the capacity to crimp 1 1/4" multi
has the capacity to crimp up to 4" industrial hose. spiral hydraulic hose and 2" industrial hose.

25
 Product Selection

S TA M PE D
This acronym that will assist you in specifying the correct hose and fitting.

S = Size
Identify the I.D. (inside diameter) of the hose

T = Temperature
Identify both working (product being transfered) and cleaning temperatures

a = Application
Identify how the hose assembly will be used: equipment type and environmental conditions

m = Media
Identify all fluids being transfered (product & cleaning) to choose chemically-compatible materials

P = Pressure
Identify both working & cleaning (maximum) pressures to assure proper hose selection

e = End Style
Identify the connection type and allignment needed

d = Delivery
Identify any special packaging or delivery needs for hose shipment

Cautionary Statement
All products are in the nature of commodities and they are sold by published specifications and not for particular purposes, uses or applications.
Purchaser shall first determine their suitability for the intended purposes, uses or applications and shall either conduct its own engineering
studies or tests, or retain qualified engineers, consultants or testing laboratories and consult with them before determining the proper use,
suitability or propriety of the merchandise or products for the intended purposes, uses or applications.
Purchaser shall follow all instructions contained in sellers catalogs, brochures, technical bulleting and other documents regarding the product.
Purchasers or users of the products should frequently and consistently undertake inspections and protective measures with respect to the
use and application of products, which should include the examination of tube and cover, conditions of the hose or tubing and the
identification, repair or replacement of sections showing cracking, blistering, separations, internal and external abrasions, leaking or slipped
couplings or connections and make proper proof tests.

Limited Warranty
The merchandise or products sold or distributed by seller are warranted to its customers to be free from defects in material and workmanship at
the time of shipment by us, subject to the following provisions. Unless otherwise specified, all warranty claims shall be made within six(6) months after
product ship date by seller - see packing slip for details. Seller’s liability hereunder is limited to the purchase price of any products proving defective,
or at seller’s option, to the replacement of such products upon which its authorized return to seller.
This warranty is in lieu of and excludes all other warranties, expressed, implied, statutory, or otherwise created under applicable law including, but not
limited to, the warranty of merchantability and the warranty of fitness for a particular purpose. In no event shall seller or manufacturer of the product be
liable for special, incidental, or consequential damages, including loss of profits, whether or not caused by or resulting from the negligence of seller
and /or the manufacturer of the product, unless specifically provided herein. In addition, this warranty shall not apply to any products or portions
thereof which have been subjected to abuse, misuse, improper installation, maintenance or operation, electrical failure or abnormal conditions, and to
products which have been tampered with, altered, modified, repaired, reworked by anyone not approved by seller, or used in any manner inconsistent
with the provisions of the “cautionary statement” above.

26
 Sizing Information
Sanitary Clamp Fitting
These actual-size drawings are provided for your
convenience and ordering accuracy when specifying
0.984 0.370 0.984 0.620 sanitary fittings.
DIA. DIA. DIA. DIA. • 0.984" O.D. is the same for 1/2", 3/4" I.D. styles
• 1.984" O.D. is the same for 1" and 1-1/2" I.D. styles
• Varying O.D. for the 2", 2-1/2" and 3" I.D. styles
1/4" - 3/8" - 1/2" Mini Clamp 3/4" Mini Clamp • Mini Clamp provided as standard - True I.D. sizes available

1.984 0.870
DIA. DIA.

3.579 2.670
DIA. DIA.

1" Clamp

1.984 1.370
DIA. DIA.

3" Clamp

1-1/2" Clamp

3.047 2.370
DIA. DIA.
2.516 1.870
DIA. DIA.

2" Clamp 2-1/2" Clamp

27
 Product Specific Literature is available on our Website

For quickest response,

send ALL request for quotes
and purchase orders to:
[email protected]

DISTRIBUTED BY:
Visit acesanitary.com
for new additions and
most up-to-date
product information

513-889-2118 • 885-357-4110 • 513-889-2125 FAX 5452 Spellmire Dr, Cincinnati, OH 45246 www.acesanitary.com
AS817