Braking System - Test: Operation and Maintenance Manual
Braking System - Test: Operation and Maintenance Manual
Braking System - Test: Operation and Maintenance Manual
Página 1 de 2
Shutdown SIS
Previous Screen
i04045481
If the machine moves during the test, reduce the engine speed
immediately, and engage the parking brake.
If the machine moved while testing the brakes, consult your Caterpillar
dealer for brake inspection and repair. Damaged brakes must be
repaired before returning the machine to operation.
Note: The machine can drive through the brakes in first gear.
Make sure that the area around the machine is clear of personnel and clear of obstacles.
1. Disable EAS.
ReferenceSee the Operation and Maintenance Manual, "Operator Controls", and refer to
section "Enhanced Auto Shift (EAS)" for more information.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 24/02/2012
D8T TRACK-TYPE TRACTOR J8B00001-UP (MACHINE) POWERED BY C15 ... Página 2 de 2
Illustration 1 g02281993
6. While the service brake pedal is depressed, move the directional control to the SECOND
SPEED FORWARD position.
7. Gradually increase the engine speed to full load speed. The machine should not move.
9. Reduce the engine speed to LOW IDLE. Engage the parking brake. Lower all attachments
to the ground. Apply a slight down pressure. Stop the engine.
NOTICE
Copyright 1993 - 2012 Caterpillar Inc. Fri Feb 24 09:11:12 EST 2012
All Rights Reserved.
Private Network For SIS Licensees.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 24/02/2012