CMSServer CMS Server Installation Manual

CMSServer Centrol Management Server Installation

Manual

Ver: 7.9.0.1

File Project Name CMSServer Date 2016-07-25

Status created

Document Name CMSServer Operation Privileg Normal

Manual e Level
[ ]Draft

[√]Release Version 7.9.0.1

[ ]Revision Pages

Notes

The contents described in this manual may be different from the version you are
currently using. If you are unable to resolve a problem using the manual please
contact the company's technical support department or supplier. The contents of this
manual will be updated from time to time, the Company reserves the right not to give
notification of any changes.

The Company does not assume any responsibility or any liability, loss or risk, direct
or indirect outcome from the use or application of any of the contents of this
document arising from any inaccuracies or omissions in this document. This manual
may contain screen shots used in day-to-day operations, the reporting, person and
company names may be fictitious. Any similarity in the name and address of the
company or an individual in reality is purely coincidental.

July 2016
Directory
1. PRODUCT INTRODUCTION ............................................................................................................. 1

1.1. PRODUCT FUNCTIONS ..................................................................................................................... 1

1.2 FEATURES INTRODUCTION ............................................................................................................... 1

1.3 SYSTEM ARCHITECTURE .................................................................................................................... 2

2. CMSSERVER DEPLOYMENT ............................................................................................................. 4

2.1 CMSSERVER MINIMUM REQUIREMENTS ................................................................................................. 4

2.2 MEDIA STREAMING SERVER ................................................................................................................ 4

2.3 EXAMPLES OF SYSTEM DEPLOYMENT .................................................................................................... 5

2.3.1 200 Vehicles/Devices ....................................................................................................... 5

2.3.2 5000 Vehicles/Devices ..................................................................................................... 5

2.3.3 50000 Vehicles/Devices ................................................................................................... 5

2.4.1 Login to System................................................................................................................ 7

2.4.2 Adding Users and role ...................................................................................................... 7

2.4.3. Enter “Device Manage” Page............................................................................................. 8

2.4.4 Search reports. .................................................................................................................... 9

3. SERVER INSTALLATION ................................................................................................................... 9

4. SERVER CONFIGURATION ............................................................................................................. 18

4.1 CMSSERVER SERVER PORT DESCRIPTION ............................................................................................ 18

4.2 CMSSERVER SYSTEM CONFIGURATION ............................................................................................... 19

4.2.1 Database view and configure ........................................................................................... 19

4.2.2 DIY: logo and title customization ...................................................................................... 20

4.2.3 CMSServer server modify network IP address ................................................................... 21

4.2.4 WIFI download configuration parameters and status View ............................................. 21

4.2.5 Modified CMSServer server web access port .................................................................... 22

 4.2.6 SMS configuration ............................................................................................................. 23

4.2.7 Email configuration ........................................................................................................... 24

4.2.8 Storage configuration ....................................................................................................... 25

4.3 CMSSERVER INTRODUCTION............................................................................................................. 26

4.3.1 Login Server ................................................................................................................... 26

4.3.2 Gateway Server .............................................................................................................. 27

4.3.3 Media Server ............................................................................................................... 29

4.3.4 User Server ..................................................................................................................... 30

4.3.5 WIFI Download Server ................................................................................................... 32

4.3.6 Storage Server ................................................................................................................ 33

5. SERVER REGISTRATION ................................................................................................................ 34

5.1 SERVER REGISTERED VERSION （FREE） ............................................................................................. 34

5.2 SERVER REGISTERED VERSION ............................................................................................................ 34

1. Product Introduction

1.1. Product Functions

CMSServer Central Management Server is a Wireless Network for centralized
management and monitoring of all types of mobile assets. It is a
high-quality, high-efficiency centralized and distributed network
management architecture that provides network transmission of video, audio,
data and other multimedia information for users to perform real-time remote
video monitoring, GPS maps positioning, video storage, vehicle scheduling,
recorded vehicle data playback and tracking, voice intercom and alarm
warning security work. Other features include remote data download and
storage, alarm triggering and remote alerts, remote vehicle management,
etc.

1.2 Features Introduction

• The CMS Server Network can support up to 100,000 vehicles monitoring

• Vehicle information management system

• Quickly locate and track vehicles quickly via GPS information, displays
real-time vehicle status display online and statistical interpretation of
data collected

• Alarms and Alerts information statistical functions

• Send SMS Alerts

• Real-time remote audio and video surveillance

• Real-time vehicle front end image capture function

• Two-way voice intercom, vehicles broadcast function

• Pan Tilt Zoom (PTZ) remote control function

• Vehicle’s historical tracking playback function

• Remote video search, download and playback capabilities

• Depending on the configuration program, the storage server automatically

snap pictures, automatic recording, occur after alarm linkage, automatic
SMS and mail to notify the user Alarm Linkage (Emergency button alarm, Video
signal alarm, Unauthorized unlock alarm, Hard disk-error alarm, Over speed
 alarm, Motion detection alarm, Long idling time alarm, Temperature alarm,
GPS signal lost alarm, IO alarm (custom), Electronic map lock alarm.

• Assets Report Description

• iPHONE and ANDROID mobile smart phone Client Support

1.3 System Architecture

Diag.1.1 CMS Server Architecture

The CMS consists of 8 Functional Servers, namely the :

1. Login Server

2. Gateway Server

3. Media Streaming Server

4. User Management Server

5. Storage Server

6. WIFI Auto Download Server

7. Web server

8. Remote Client Monitoring Server

Users have the option of deploying 1 or 2 of the 7 Functional Servers stated above
such as, Login Servers, Multiple Gateways Servers, Media Streaming Servers, Multiple
Users Management Servers to provide Mobile DVR and Remote Client Services and
features as GPS Location, Video and Alarms.

Description of Functional Servers

Database Server: Used mainly as Storage Server, Configuration information and Alarm
events.

The database server application used is MySQL-5.5.12 - Win32.

Login Server: For registration of various servers and to coordinate and manage
registered servers, Assign User Clients, Configure End Management Server,
Allocation of Gateway Server for MDVR devices, User Management, Gateway Servers,
Server Load Balancing.

Gateway Server: Provide vehicle access. Vehicle Gateway Server is used to establish
a communication link between the MDVR device and the server, sending vehicle location
and status information via this link.

Streaming Media Server: Provides media data forwarding function. Including Audio
and Video, Intercom, Remote Monitoring, Remote Capture, Configuration parameters,
Search and forwarding Download data.

User Management Server: Provides Remote Client Access

Storage Server: For storing pictures, video capture and reduce costs

WIFI Auto Download Server: When within the assigned access point range, the WIFI
enabled MDVR will automatically upload the video files onto the server.

Web Server: Provides GIS electronic map information, and provide links to the CMS
Backroom Control center, Front End management system login.

Remote Client Application: Provides real-time video preview, GPS positioning,

electronic map display, vehicle status monitoring, image capture, video search,
video download and playback, vehicle tracking playback, real-time alarm information
monitoring, alarm statistics, vehicle configuration parameters and other functions.
The Remote Client is available as Web Client, PC Windows Client, IOS and Android
Version Clients, allowing users different ways to login and manage their vehicle.
2. CMSServer Deployment

2.1 CMSServer Minimum Requirements

OS Microsoft Windows Server 2003 or Higher

CPU Intel quad-core Xeon, Frequency of not less than 2.33GHz

Network 2 Gigabit Ethernet

RAM 4G or more

Hard Disk 1TB or more

CD Player DVR-ROM

Support VGA Display

Others Supports normal keyboard, recommended to use USB Keyboard

LED Indicator lights for Computer, HDD and other Activities Status

2.2 Media Streaming Server

Performance Specifications

Each Streaming Server, distributed, can support up to 256

concurrent Incoming Channels with a bandwidth of 128Mbps.

Each Video Channel supports up to 6 Clients viewing. Each

Channel maximum data rate output is 512Mbps.

Gigabit Ethernet ports, 20Mbps output stream rate average

forwarding delay is less than 5 ms

Gigabit Ethernet ports, 100Mbps output stream rate average

forwarding delay is less than 40ms.

Gigabit Ethernet ports, 512Mbps output stream rate average

forwarding delay is less than 200ms.

Video Bandwidth

Using CIF video format per Channel video data rate is

320Kbit/second, 256 video channels therefore requires 320 X
256 = 81,920 Kbit bandwidth.
 NOTE: As the MDVR device in a 3G network environment has
network bandwidth limitations. The maximum upload is using
CIF resolution video format.

2.3 Examples of System Deployment

This examples are for reference only, using user's hardware, network and CMS, MDVR
installation environment.

2.3.1 200 Vehicles/Devices

2.3.2 5000 Vehicles/Devices

2.3.3 50000 Vehicles/Devices

2.4 CMSServer Operating Processes

Steps：

1） Install CMSServer CMS

2） Create Users in BackOffice

3） Create Devices/Vehicles ID in BackOffice

4） Assign User/Company Groups

5） User Login Using FrontEnd Management System to Manage Vehicles/Devices

Specific operation as shown in the following:

2.4.1 Login to System

Login to the management system (address: http://localhost IP), Local host CMSServer
is where the server resides, PC's IP address; CMSServer BackOffice management system
default login name and password are: admin

2.4.2 Adding Users and role

2.4.3. Enter “Device Manage” Page
2.4.4 Search reports.

3. Server Installation

Requirements:

Existing CMSServer installation can directly install the new version of the
CMSServer.

1. Double Click to run CMSServer installation

2. After double-click , enter installation dialogue box：

 Pic 3.1 Installation Dialogue Box

3. Click “Next”，enter into the Installation Dialogue Box, as shown below:

Pic 3.2 Select Installation Path

4. Specify the target installation path, click "Next" to continue.

 Pic 3.3 Select the Program location

5. Select additional tasks (whether to create a desktop shortcut), and then click
"Next" to continue
 Pic 3.4 Choose whether to create a desktop shortcut

6. Click on “Install” to complete the Installation.

 Pic 3.5 Installation Process

7.Click the "Finish" button, Data Configuration begins after this.

Pic 3.6 Database Configuration Parameters
8.Click on “Next” to begin Network Address Configuration

Pic 3.7 Web Server Parameter Configuration

9. Click on “Next”to start Web Server Configuration Parameters

Pic 3.8 Web Server Port Configuration
10. Click on “Finish” to activate CMSServer Server Controller.
 Pic 3.9 Configuration Complete

4. Server Configuration

4.1 CMSServer Server Port Description

CMSServer Server default port are as follows for Mobile DVR and Client services.
If the Server is behind a firewall, please ensure the following ports are opened
in order for the appropriate services are made available for the Mobile DVR and Client
Users.

Server Name Server Port Description Remarks

 6606 Device Service Port 6606 - UDP
Login Server 6605, 6606
6605 Client Service Port 6605 - TCP and UDP

6608 Device Service Port 6608 - UDP

Gateway Server 6607, 6608
6607 Client Service Port 6607 – TCP and UDP

Media Streaming 6602 Device Service Port 6602 - TCP

6602, 6601
Server 6601 Client Service Port 6601–TCP and UDP

User Management
6603 6603 Client Service Port
Server 6603 –TCP and UDP

WIFI Download
6610 Device Service Port 6610 - TCP
Server 6609 6610
6609 Client Service Port 6609–TCP and UDP

Storage Server 6612 Device Service Port 6612 - TCP

6611 6612
6611 Client Service Port 6611–TCP and UDP

WEB Server 80 80 Client Service Port 80 - TCP

4.2 CMSServer System Configuration

4.2.1 Database view and configure

Note: The database configuration, installation package has already been configured
for this version of CMSServer.

Pic 4.2.1 Database Configuration Information

4.2.2 DIY: logo and title customization

 Pic 4.2.2 DIY configure

4.2.3 CMSServer server modify network IP address

1. Installation configuration LAN, and now would like to replace the public
network, directly at the following figure can be modified, and vice versa.

WAN IP

LAN IP

Pic 4.2.3 modify network ip address

4.2.4 WIFI download configuration parameters and status View

 Pic 4.2.4 wifi download configuration parameters and status View

4.2.5 Modified CMSServer server web access port

Here you can modify the web service port configuration 80 port has been
occupied,as shown below:
 Pic 4.2.5 modify web access port

4.2.6 SMS configuration

 Pic 4.2.6 sms configuration

4.2.7 Email configuration

 Pic 4.2.7 email configuration

4.2.8 Storage configuration

 Pic 4.2.8 storage configuration

4.3 CMSServer Introduction

4.3.1 Login Server

1. From the main CMSServer Server window, select "Login Server", "Service
Configuration" button and then click on the top of the interface, log on to the server
can be configured in the form of pop-up network parameters, as shown below:
 Pic 4.3.1 Login Server Parameter Configuration

Client Access Port : Registered Client Users connect to the server through this
port. Default is 6605, it is recommended not to modify;

Device Access Port：Registered devices/vehicles connects to the gateway server

through this port. Defaults to 6606, it is recommended not to modify.

One or 2 servers can be deployed on the CMSServer system and log on to the server,
one of them as the primary server, another as Login (Backup) server. When the Login
server fails, the Login server by switching to a virtual IP, will not affect the
normal use of the device and the client.

4.3.2 Gateway Server

1.From the main CMSServer Server window, select "Gateway Server", Click "Service
Configuration" button which on the top of the interface, then you can config your
gateway parameter , as shown below:

Pic 4.3.2 Gateway Server Configuration Parameters

Login Server Address: Login Server uses the PC's Server IP address. If the Gateway
server and Login Server are on the same PC, you can enter 127.0.0.1, where the
Gateway and Login Server resides on the same LAN, the IP configuration should be
the LAN IP Address. If the enter log on to the server where the LAN IP address,
and vice versa enter log on to the server where the PC's public IP address, and enter
the Windows service to modify the properties on the gateway server login tab);
127.0.0.1 advice address is not valid in a particular case must input CMSServer
server where PC's IP;

Server port: Client Access the Login Server service port, default 6605, does not
propose to modify.
Server ID：Each Gateway Server has a unique number. The system can deploy one or
more Gateway Servers, Login Server uses the unique number to distinguish between
different gateway server, the unique number must be the same as the ID of the gateway
server, and server management information defined in CMSServer BackOffice
Management System;

Client Access Port: Through this port to provide service for the Client and Media，
default is 6607 ，does not propose to modify;

Device Access Port： Through this port to provide instruction registration service
for car DVR. default is 6608 ，does not propose to modify;

4.3.3 Media Server

1. From the main CMSServer Server window, select "Login Server", "Service
Configuration" button and then click on the top of the interface, media server can
be configured in the form of pop-up network parameters, as shown below

Pic 4.5 Media Server Configuration Parameter

Login Server Address: Login Server uses the PC's Server IP address. If the Media
server and Login Server are on the same PC, you can enter 127.0.0.1, where the Media
and Login Server resides on the same LAN, the IP configuration should be the LAN
IP Address. If the enter log on to the server where the LAN IP address, and vice
versa enter log on to the server where the PC's public IP address, and enter the
Windows service to modify the properties on the media server login tab); 127.0.0.1
address is not valid in a particular case must input CMSServer server where PC's
IP;

Server port: Client Access the Login Server service port, default 6605, not advised
to change.

Server ID：Each Media Server has a unique number. The system can deploy one or more
Media Servers, Login Server uses the unique number to distinguish between different
Media server, the unique number must be the same as the ID of the Media Server, and
server management information defined in CMSServer BackOffice Management System;

Client Access Port: Through this port to provide Media forwarding service，default
is 6601 ，does not propose to modify;

4.3.4 User Server

1. From the main CMSServer Server window, select "Login Server", "Service
Configuration" button and then click on the top of the interface, user server can
be configured in the form of pop-up network parameters, as shown below:
 Pic 4.6 Media Server Configuration Parameters

Login Server Address: Login Server uses the PC's Server IP address. If the User
server and Login Server are on the same PC, you can enter 127.0.0.1, where the User
and Login Server resides on the same LAN, the IP configuration should be the LAN
IP Address. If the enter log on to the server where the LAN IP address, and vice
versa enter log on to the server where the PC's public IP address, and enter the
Windows service to modify the properties on the User Server login tab); 127.0.0.1
address is not valid in a particular case must input CMSServer server where PC's
IP;

Server port: Client Access the Login Server service port, default is 6605, not
advised to change.
Server ID：Each User Server has a unique number. The system can deploy one or more
User Servers, Login Server uses the unique number to distinguish between different
User server, the unique number must be the same as the ID of the User server, and
server management information defined in CMSServer BackOffice Management System;

Client Access Port: Through this port to provide registration and update data
service，default is 6603 ，does not propose to modify;

4.3.5 WIFI Download Server

Login Server Address: Login Server uses the PC's Server IP address. If the WIFI
Download Server and Login Server are on the same PC, you can enter 127.0.0.1, where
the WIFI Download Server and Login Server resides on the same LAN, the IP
configuration should be the LAN IP Address. If the enter log on to the server where
the LAN IP address, and vice versa enter log on to the server where the PC's public
IP address, and enter the Windows service to modify the properties on the WIFI
Download Server login tab); 127.0.0.1 address is not valid in a particular case must
input CMSServer server where PC's IP;

Server port: Client Access the Login Server service port, default 6605, not advised
to change.

Server ID：Each WIFI Download Server has a unique number. The system can deploy one
or more WIFI Download Servers, Login Server uses the unique number to distinguish
between different WIFI Download Server, the unique number must be the same as the
ID of the WIFI Download Server, and server management information defined in
CMSServer BackOffice Management System;

4.3.6 Storage Server

Login Server Address: Login Server uses the PC's Server IP address. If the Storage
Server and Login Server are on the same PC, you can enter 127.0.0.1, where the
Storage Server and Login Server resides on the same LAN, the IP configuration should
be the LAN IP Address. If the enter log on to the server where the LAN IP address,
and vice versa enter log on to the server where the PC's public IP address, and enter
the Windows service to modify the properties on the WIFI Download Server login tab);
127.0.0.1 address is not valid in a particular case must input CMSServer server where
PC's IP;

Server port: Client Access the Login Server service port, default 6605, not advised
to change.

Server ID：Each Storage Server has a unique number. The system can deploy one or
more Storage Servers, Login Server uses the unique number to distinguish between
different Storage Server, the unique number must be the same as the ID of the Storage
Server, and server management information defined in CMSServer BackOffice
Management System;

5. Server Registration
Free server version and the registered version only difference is to manage the
number of vehicles.The free version can manage 10 vehicles.The registered version
can manage the number of vehicles to be determined based on the serial number to
developers.

5.1 Server registered version （free）

The free version of the CMSServer server without the server registration
operation, data can be configured to use.

5.2 Server registered version

1. Click on the "Software Registration" menu item in the the CMSServer server control
window.
2.The software registration interface at this time you can see the signature of this
server, as shown above the red box shown

3. When mouse click "Copy to clipboard" signature copied to the clipboard, you can
also directly select the signature copy available to developers, this signature to
obtain the corresponding serial number (including the management of vehicles
quantitative information).

4.Paste it into the corresponding serial number provided by the developers of the
signature sequence number window, as shown below:
5.Click "Register" button to complete the registration.If you want to see the
Software Registration information，Click CMSServer server control interface
"Software Registration" button will pop up the software registration information.
This registration information has been saved to the registry service where PC users
to replace the network card or hard drive, as well as software feature codes change,
need to re-obtain the serial number.