User’s Manual for CoPeck
What is “CoPeck”? How to Install
“CoPeck” is an application software Execute Setup.exe and follow the wizard
for getting a report of the printer. instruction.
Supported Environment How to Uninstall
Microsoft® Windows 8 Uninstall CoPeck from control panel of
Microsoft® Windows 7 windows.
Microsoft® Windows Vista
Supported Models How to Use
<Type1> [1] Preparation for printer
- PROII/ProII(V) Series Turn on Main Power Switch and Turn
- SP-540V/300V/300 off Sub Power Switch.
- FLJ-300 Please be confirmed that there is no
- SJ-1000/1045 printing data transmission between the
printer and PC.
<Type2>
- AJ-1000/740/1000i/740i [2] Starting CoPeck
- FP-740 Double-click CoPeck.exe and you can
see the dialog as shown below.
<Type3>
- XC-540/540MT, XJ-740/640/540
- VP-540/300/540i/300i
- LEC-540/300/330/300A, LEJ-640
- RS-640/540
- FH-740
- XR-640
<Type4>
- SP-540i/300i
- VS-640/540/420/300/640i/540i/300i Double clicking
- LEF-20/12 CoPeck.exe
- RA-640, RE-640
<Type5>
- XF-640
- RF-640
- RT-640
User’s Manual for CoPeck
[4] Selecting models and connection [6] Finishing CoPeck
port Finish CoPeck by clicking the [Exit] button.
Open the [Select Port] dialog by clicking
the “Select Port” button.
Select the type of the target printer in
Product selection. For the details, refer
to [Supported Models] in the previous
page.
Select connection port.
If CoPeck cannot get a report...
If you select [via Network], type in IP
address. Please check the points below.
1. Is the Sub Power Switch of the printer
[5] Getting a report from your printer off?
Click the [Get Report] button. 2. Did you select correct model and port?
3. Is IP address correct?
4. In case of PROII series, is firmware
version 2.0 or above?
Save it as a file.
Ver.6.80
Copyright © 2007-2014 Roland DG Corporation
http://www.rolanddg.com
2014.12.1
