7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

Predictive aircraft maintenance programs

Predictive maintenance seeks to forecast time-to-failure to minimize
downtime, and thereby maximize equipment lifetime.

By Don Van Dyke

ATP/Helo/CFII, F28, Bell 222.
Pro Pilot Canadian Technical Editor

ivil and military aviation users depend

increasingly on streamlined maintenance to
C ensure aircraft are airworthy. Currently, most
operators rely either on maintenance schedules
based on preventive rules, or on reactive
response to unexpected failures.

Predictive maintenance (PdM), on the other hand, bases

aircraft maintenance on Big Data analytics and artificial
intelligence (AI), which are used for operational simulations
that often lead to insights that may be otherwise masked.

The main obstacles to PdM implementation for business

Bombardier Global 7500 and Gulfstream
aircraft operators have been difficulties assembling relevant G650ER typify the protections afforded by a
portfolio of OEM warranties when aircraft are
Big Data, acquiring analytical processing capabilities, and new and in their early operational life. As an
justifying associated costs. aircraft matures, portions or all of these
warranties cease. The maintenance cost
increase through 5–15 years of operation is
Since customer experience is crucially important in business roughly 3.5%/year. In the post-warranty
aircraft operations, monitoring aspects of PdM must go period, owner/operators are compelled to
either accept ongoing airworthiness
beyond airworthiness to regard appearance, convenience, responsibilities directly, or to subcontract
them to aftermarket MRO providers.
and esthetics in the cabin.

Maintenance strategies

The continuing airworthiness of an aircraft or component is ensured through associated maintenance, repair, and
overhaul (MRO) activities which are broadly related to aircraft make, model, age, and type of operation.

Traditionally, airworthiness management correlates with 3 main parameters – utilization (flight hours), cycles
(landings), and calendar-based events (scheduled maintenance). Over time, aircraft maintenance accounts for
as much as 35% of an aircraft’s annual operating budget.

https://www.propilotmag.com/predictive/ 1/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

Warranties. Original equipment manufacturers (OEMs) issue limited warranties on new products and
components, so that related expenses are largely covered in the event of accident or equipment fault involving
these proprietary items within linked periods.

Warranties add appreciably to the value of the purchase. According to Conklin & de Decker, labor and parts for
new aircraft may cost 15% and 30% less, respectively, during the warranty period.

Post-warranty MRO. The post-warranty (aftermarket) MRO period is active and complex. OEMs continue to
monitor reliability data so that maintenance programs prescribed for each aircraft, system, or component can be
amended – subject to regulatory approval – to maintain airworthiness, yet avoid unnecessary upkeep.

Several OEMs offer extensions (eg, 2 years or 500 engine operating hours) to provide warranty-like protection
beyond the original warranty period.

Viable maintenance strategies optimize component life and risk of failure, often maximizing operational utility by
replacing parts that may still have significant remaining life, and by anticipating breakdowns based on
experience.

Aftermarket mx strategies

Three primary aftermarket maintenance strategies are

currently used – preventive (PM), predictive (PdM), and
corrective (CM). Each of these has unique benefits and
disadvantages, depending on the system monitored, its life
stage, and the operational and business impact of downtime.

The main differentiators are their relative effectiveness in

meeting airworthiness requirements, containing maintenance
Gulfstream G650ER costs, and avoiding or minimizing operational interruptions.

PM relies on trend monitoring to avoid faults by inspecting or

replacing components at scheduled maintenance intervals. PdM, on the other hand, is condition-based, and
involves monitoring in-service component health and deterioration, using data and trends to determine when
preemptive maintenance action should be taken. And CM is reactive and requires minimal effort to implement,
but asks the self-insured owner to assume total risk and related costs.

Return on investment (ROI) in a given maintenance strategy reflects the value of meeting operational and
utilization goals reliably against associated maintenance costs and asset management. Reliability-centered
maintenance is an amalgam of these primary strategies which some authorities recommend be applied in the
following indicated ratios: PM (25–30%), PdM (45–55%), and CM (10%).

Features of predictive mx

https://www.propilotmag.com/predictive/ 2/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

Wider application of information technology (IT) in aviation benefits from smarter, sensor-enabled assets; lower-
cost sensors making more asset health data available, often in real time; cloud computing offering inexpensive
connectivity and feature-rich data-management tools; and reliable analytics, AI, and machine learning (ML)
technologies, leveraged for asset performance management (APM).

PdM is a main focus of future industry expenditures. It was cited as “extremely important” by 55% of respondents
to a recent Honeywell business aviation survey, which concluded that this is the next frontier of connected
technologies.

GE Aviation uses PdM to address significant maintenance challenges such as poor data visibility and insights,
lack of internal resources and expertise, investigation and prioritization of maintenance issues, and ineffective
maintenance fixes.

To date, its identified solutions have been applied to 13 business fleet types.

The IBM Watson Discovery Service, for example, combines AI and sophisticated analytical software. It performs
as a question-answering machine providing precise responses to complicated questions with capabilities far
superior to earlier maintenance expert systems.

Benefits. PdM tasks can be performed on an as-needed

basis, while minimizing the risk of unplanned outages to
increase dispatch reliability, repair/replace components prior
to failure, avoid unscheduled maintenance events, improve
maintenance efficiency, and optimize operating costs. This table presents the relative costs,
benefits, and drawbacks of 3 primary
strategies for maintaining aircraft and engine
PdM employs non-intrusive testing techniques to evaluate airworthiness, service fitness, and
asset performance trends. Additional methods used can appearance.

include analysis of thermodynamics, acoustics, and

vibrations, as well as infrared analysis.

Continuous developments in Big Data, machine-to-machine communication, and cloud technology have created
new possibilities for investigating information derived from assets. PdM offers cost savings over routine or time-
based scheduling, as well as proactive parts stocking and efficient scheduling of repair and manpower resources
during downtimes.

Condition monitoring. Onboard condition monitoring serves to reduce the likelihood of catastrophic component
failure. This involves 3 elements – relevant data collection from aircraft health-monitoring technologies, predictive
analytics to anticipate and prevent inflight events, and asset maintenance workscopes based on utilization,
environment, and operating practices.

https://www.propilotmag.com/predictive/ 3/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

Data sources include flight data recorder (FDR)/quick access recorder (QAR), manual recordings of cockpit
instruments, and engine/airframe health monitoring (EHM/AHM) systems – often at the component level – via
ACARS, sensors, actuators, and other controls.

Data are then interpreted, overlaid with historical information, and subjected to advanced analytics supporting
models which predict fault behavior.

Related costs of required maintenance and engineering data processing can be prohibitive for some – a fact
which encourages sharing related infrastructure. There are 2 major cost centers in which communal PdM could
relieve costs and consequences – unscheduled maintenance and no fault found (NFF) events.

Unscheduled maintenance. These are particularly disruptive events since they often occur away from base and
the means to quickly restore aircraft airworthiness. The traditional model requires parts replacement in the event
of a fault – a reactive rather than proactive action that risks misidentification of both the cause and cure of the
fault.

Failure prediction, fault diagnosis, failure-type classification, and recommended relevant maintenance actions are
all hallmarks of the more forward-looking PdM methodology.

No fault found. This occurs when a part is suspected to be faulty but subsequent testing fails to confirm the
diagnosis. NFF investigation reports often conclude “Cannot be replicated,” “No cause can be identified,” or
“Retest OK.” NFF is a potentially hazardous condition with increased risk of maintenance-induced fault,
especially when replaced parts are found to be airworthy.

Associated costs in terms of time and effort can be significant. Across both military and civil aviation, 3–5% of
maintenance manhours are officially coded as NFF, but some sources contend that 10–15% may be more
realistic.
PdM may prove particularly effective in dealing with NFF determinations, which are often time-consuming and
expensive to characterize.

An important step is to identify the NFF components most often replaced – a task for which PdM is especially
well-suited. ARINC Report 672, Guidelines for the Reduction of No Fault Found, suggests that operators should
take a holistic view of the NFF problem, including its impact on design, documentation, training, testing, and
communications.

A cargo carrier found, for example, that reported flight control computer failures were caused not by flaws in the
computers, but rather by aging wires connected to the units.

In another case, a carrier and an OEM learned through destructive testing of circuits that, after 10 years, some
microchips lost their moisture-repellent coating. With that knowledge, the vendor agreed to replace the
microchips at specified intervals.

https://www.propilotmag.com/predictive/ 4/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

The future of PdM

Before PdM achieves wide acceptance, challenges

pertaining to data sourcing, data ownership, connectivity, and
regulatory support await comprehensive resolution.

The goal of PdM is to increase operational Data sourcing. According to an Oliver Wyman survey, the
efficiency and minimize return-to-service global commercial aircraft fleet could generate 98 million
times through data-driven decisions.
Although the underlying rationale of PdM is terabytes (TB) of data by 2026. The large data set available
clear, implementation awaited advances in
sensor technology and data processing for predictive analysis includes onboard sensor data, aircraft
capacity which were only achieved relatively utilization, component removal and installation records,
recently. The PdM programs listed are
generally proprietary to the indicated maintenance- and pilot-reported defects, base maintenance
airframe and engine OEMs and service task card findings, and other similar sources.
providers.

The EASA Cockpit Voice and Data Recorder (CVDR) and

Flight Data Recorder (FDR) mandate requires 25 hrs of datalink and 70 hrs of flight data recording for new
aircraft with a maximum certified takeoff mass (MCTOM) greater than 27,000 kg (59,535 lb) entering service on
January 1, 2021 or later. This will further increase the Big Data available to PdM systems.

Data ownership. The vast data generated and stored in pursuit of PdM comprise significant and valuable
intellectual property.

A well-structured and managed PdM program can help to retain asset value by providing a secure, verifiable
database of related maintenance.

One early approach ensures that the operator controls which datasets are shared, that identifiable data is owned
by the operator, that it’s only visible to the operator and the OEM, and that it’s never shared outside of the OEM.

Data platforms. A data platform is a repository which exchanges data between applications and systems, such
as between an electronic technical log (ETL) and the operator’s monitoring & evaluation system. Honeywell
FORGE is an example which supports its Connected Maintenance application.

Initially, engine and airframe OEMs led the acquisition and processing of data, using proprietary software to
manage data effectively. As aircraft become increasingly sophisticated, so does the need for solutions
accommodating multiple fleet types involving different data standards and forms.

It is no longer prudent to keep Big Data in-house. OEMs, operators, and MROs now seek to share data to realize
mutually beneficial goals.

Legal aspects. Many jurisdictions have legal restrictions on data use, sharing, and privacy. This may bring into
question which laws and practices will normalize managing the quality, use, and sharing of aircraft-related data.

https://www.propilotmag.com/predictive/ 5/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

Poor response to PdM data could, in future, be regarded as malpractice, as when a doctor mismanages health
data. Legal liabilities that could accompany the growth of PdM may lead to new requirements for data which
must be shared with regulators.

And regulators may also have to decide what minimum MRO data technology will be required to hold certain
licences or certifications.

Artificial intelligence. By integrating contextual data and component behavior, AI is an increasingly important
influence on PdM to improve the analytical reliability of remaining life and recommended mitigation strategies.
Combining PdM, AI and Big Data may highlight component replacement options and suggest other concurrent
maintenance needs.

Conclusion

Business aviation maintenance planning and budgeting must regard airworthiness, operational demands, and
cabin/galley esthetics, as well as account for cost-saving measures.

Predictive analytics lead to more timely maintenance that can be performed before an issue becomes
hazardous. In turn, this means maintenance cost reductions, greater component reliability, lower inventory
requirements, and shorter maintenance turn times.

The result is that PdM may offer business and operational benefits supplemental or alternative to those of PM
and CM programs.

The potential benefits of PdM supporting evidence-based decision-making are most profound when considered
collaboratively and appropriately with the other maintenance strategies.

This technology trend is just beginning to affect business aviation MRO widely. It is critical for OEMs and aircraft
owners/operators to adopt an open interest in its ongoing development and application.

Don Van Dyke is professor of advanced aerospace topics at Chicoutimi College of

Aviation – CQFA Montréal. He is an 18,000-hour TT pilot and instructor with extensive
airline, business and charter experience on both airplanes and helicopters. A former IATA
ops director, he has served on several ICAO panels. He is a Fellow of the Royal
Aeronautical Society and is a flight operations expert on technical projects under UN
administration.

PREVIOUS
Hourly cost maintenance programs 

https://www.propilotmag.com/predictive/ 6/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

NEXT
Direct operating costs of bizjets and TPs 

FOLLOW US

     

NEWS

Avfuel Supplies Million Air BUR with SAF

JULY 9, 2021

Norway’s First P-8A Poseidon Rolls Out of the Paint Shop

JULY 9, 2021

Helicopter flights: safer and more sustainable routes thanks to satellites

JULY 9, 2021

Third Falcon 6X Joins Test Program

https://www.propilotmag.com/predictive/ 7/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine
JULY 2, 2021

Jet Aviation Launches Fueling Service at Geneva FBO and MRO Facility
JULY 2, 2021

Gulfstream expands G600 completions

JUNE 29, 2021

Heather Sermo Joins Pentastar as Vice President of Human Resources

JUNE 23, 2021

Blackhawk enters avionics arena with Blackhawk Aerospace Technologies, Inc. Launch
JUNE 22, 2021

Universal Avionics InSight™ Display System Selected by MC2 for Falcon 50 Upgrade
JUNE 18, 2021

Bombardier Delivers First Global 7500 Aircraft in Indonesia

JUNE 18, 2021

SAF orders three H145s for EMS missions in France

JUNE 18, 2021

West Star Aviation Welcomes Craig Duncan as PM for Textron at CHA

JUNE 15, 2021

Clay Lacy Earns EASA Part 145 Repair Station Certification

JUNE 15, 2021

Signature Flight Support, partnering with Neste, introduces supplies of sustainable aviation fuel
at Austin-Bergstrom Int’l airport (AUS), Houston-Hobby airport (HOU), and the Norman Y. Mineta
San Jose Int’l airport (SJC)
JUNE 11, 2021
West Star Aviation Announces Randy Miller as Technical Sales Manager (GJT)
JUNE 10, 2021

Airbus Helicopters calls all industry stakeholders to join the Sustainable Aviation Fuel User
Group
JUNE 10, 2021
Banyan Promotes Abby Self to Banyan Pilot Shop Manager
JUNE 10, 2021

Raisbeck Reaches Critical Milestone for New Drag Reduction System

JUNE 10, 2021

First rescue helicopter flies on sustainable aviation fuel

JUNE 7, 2021

Airbus expands India COVID-19 relief, delivers more oxygen plants, ventilators, mobile ICUs
JUNE 2 2021

© Queensmith Communications Corporation

https://www.propilotmag.com/predictive/ 8/9
7/11/2021 Predictive aircraft maintenance programs - Professional Pilot Magazine

https://www.propilotmag.com/predictive/ 9/9