Scribd Logo
Upload

Welcome to Scribd!

  • 206 views

    Alloy Data Sheet En-Aw 6101B (Ealmgsib) : Type: High Conductivity Alloy)

    Uploaded by

    Bouchra Sonsuza
    This document provides information on the alloy EN-AW 6101B, a medium-strength aluminum alloy suitable for applications requiring high electrical conductivity such as busbars and heat sinks. It lists the alloy's chemical composition, mechanical properties according to temper, physical properties, weldability characteristics, machining characteristics, corrosion resistance, and coating properties. Typical filler materials for welding the alloy are also specified.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Alloy Data Sheet En-Aw 6101B (Ealmgsib) : Type: High Conductivity Alloy)

    Uploaded by

    Bouchra Sonsuza
    206 views1 page
    This document provides information on the alloy EN-AW 6101B, a medium-strength aluminum alloy suitable for applications requiring high electrical conductivity such as busbars and heat sinks. It lists the alloy's chemical composition, mechanical properties according to temper, physical properties, weldability characteristics, machining characteristics, corrosion resistance, and coating properties. Typical filler materials for welding the alloy are also specified.

    Original Title

    Nedal-alloy-Datasheet-EN-AW-6101B (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the alloy EN-AW 6101B, a medium-strength aluminum alloy suitable for applications requiring high electrical conductivity such as busbars and heat sinks. It lists the alloy's chemical composition, mechanical properties according to temper, physical properties, weldability characteristics, machining characteristics, corrosion resistance, and coating properties. Typical filler materials for welding the alloy are also specified.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    206 views1 page

    Alloy Data Sheet En-Aw 6101B (Ealmgsib) : Type: High Conductivity Alloy)

    Uploaded by

    Bouchra Sonsuza
    This document provides information on the alloy EN-AW 6101B, a medium-strength aluminum alloy suitable for applications requiring high electrical conductivity such as busbars and heat sinks. It lists the alloy's chemical composition, mechanical properties according to temper, physical properties, weldability characteristics, machining characteristics, corrosion resistance, and coating properties. Typical filler materials for welding the alloy are also specified.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Nedal Aluminium BV P.O.

    Box 2020 +31 (0)30 292 57 11

    Groenewoudsedijk 1 3500 GA Utrecht [email protected]

    3528 BG Utrecht The Netherlands www.nedal.com

    ALLOY DATA SHEET


    EN-AW 6101B[EAlMgSiB]
    (Type: High conductivity alloy)
    The alloy EN AW-6101B is a medium strength alloy, specifically dedicated to applications where a high electrical
    conductivity is required. Typical applications are busbars and other electrical conductors and heat sinks.

    Chemical composition according to EN573-3 (weight%, remainder Al)


    Si Fe Cu Mn Mg Cr Zn Ti remarks others
    each total
    0.30- 0.10- max. max. 0.35- max. max. max.
    - -
    0.6 0.30 0.05 0.05 0.6 0.10 0.03 0.10

    Mechanical properties according to EN755-2


    Temper* Wallthickness Yield stress Tensile Elongation Hardness**
    e Rp0.2 strength A A50 HB
    [mm] [MPa] Rm [%] [%]
    [MPa]
    T6 ≤ 15 160 215 8 6 65
    T7 ≤ 15 120 170 12 10 60
    *Temper designation according to EN515: T6-Solution heat treated, quenched and artificially aged, T7- Solution heat treated,
    quenched and artificially overaged to achieve other specific optimum properties than strength. (T6/T7 properties can be achieved
    by press quenching)
    ** Hardness values are for indication only

    Physical properties (approximate values, 20°C)


    Density Melting range Electrical Thermal Co-efficient of Modulus of
    Conductivity Conductivity thermal Elasticity
    [kg/m3] [°C] [MS/m] [W/m.K] Expansion [GPa]
    10-6/K
    T6: ≥ 30
    2690 585-650 218 23.5 ~70
    T7: ≥ 32

    Weldability1
    Gas: 3 TIG: 2 MIG: 2
    Typical filler materials (EN ISO18273): SG-AlMg5Cr(A) or AlSi5, and AlMg3 when the product has to be anodised. Due
    to the heat input during welding the mechanical properties will be reduced by approximately 50% (ref. EN1999-1).

    Machining characteristics1 Coating properties1


    T6 temper: 2 Hard protecting Decorative/bright/colour
    anodising: 1 anodising: 1
    Corrosion resistance1
    General: 1 Marine: 2

    ______________________________________________________________________________
    1
    Relative qualification ranging from 1-very good to 6 unsuitable November 2017
    Rev. 02

    You might also like